You are not logged in.
- Topics: Active | Unanswered
#1 2026-10-03 21:55:12
- RetroThief
- Member
- Registered: 2021-02-01
- Posts: 9
[SOLVED] X11 Failing to Resume From Suspend to RAM (S3)
I cannot seem to resume my system from S3 sleep on X11 except on KDE-Xorg (Which I would prefer not to use). I have tried i3, bspwm, and dwm and every time I resume from sleep the screen turns on to complete black. The keyboard is effectively non-functioning and I cannot switch between TTY's. The only thing I can do is reboot my PC by using the SysRq commands, REISUB.
I am running on an NVIDIA RTX 3070 using the nvidia-open drivers. I've also followed: https://wiki.archlinux.org/title/NVIDIA … er_suspend, to make sure the VRAM is being restored by setting NVreg_UseKernelSuspendNotifiers=1.
My system is fully upgraded as of yesterday. This issue does NOT occur when I am running on Wayland. I have tested this in Hyprland and SwayWM and resuming from sleep works flawlessly, until a recent regression (https://bbs.archlinux.org/viewtopic.php?id=314987).
I do not know what has changed because I used to use X11 daily about 3-5 years ago and everything worked fine then. I am using `startx -- -keeptty >~/.xorg.log 2>&1` to start my window manager.
Here are my Xorg logs from when I ran KDE and when my system resumed properly:
[ 7508.435]
X.Org X Server 1.21.1.24
X Protocol Version 11, Revision 0
[ 7508.435] Current Operating System: Linux alcyoneus 7.2.8-arch1-2 #1 SMP PREEMPT_DYNAMIC Thu, 01 Oct 2026 17:24:20 +0000 x86_64
[ 7508.435] Kernel command line: rd.luks.name=9005398e-1363-4824-800a-1715a5176b46=root rd.luks.options=discard,password-echo=no root=/dev/mapper/root rw quiet nvidia_drm.modeset=1
[ 7508.435]
[ 7508.435] Current version of pixman: 0.46.4
[ 7508.435] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7508.435] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7508.435] (==) Log file: "/home/retro/.local/share/xorg/Xorg.0.log", Time: Sat Oct 3 16:41:07 2026
[ 7508.435] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 7508.436] (==) No Layout section. Using the first Screen section.
[ 7508.436] (==) No screen section available. Using defaults.
[ 7508.436] (**) |-->Screen "Default Screen Section" (0)
[ 7508.436] (**) | |-->Monitor "<default monitor>"
[ 7508.436] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 7508.436] (**) Allowing byte-swapped clients
[ 7508.436] (==) Automatically adding devices
[ 7508.436] (==) Automatically enabling devices
[ 7508.436] (==) Automatically adding GPU devices
[ 7508.436] (==) Automatically binding GPU devices
[ 7508.436] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 7508.436] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 7508.436] Entry deleted from font path.
[ 7508.436] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 7508.436] Entry deleted from font path.
[ 7508.436] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 7508.436] Entry deleted from font path.
[ 7508.436] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 7508.436] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 7508.436] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 7508.436] (II) Module ABI versions:
[ 7508.436] X.Org ANSI C Emulation: 0.4
[ 7508.436] X.Org Video Driver: 25.2
[ 7508.436] X.Org XInput driver : 24.4
[ 7508.436] X.Org Server Extension : 10.0
[ 7508.436] (++) using VT number 1
[ 7508.437] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 7508.437] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 7508.437] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.1/0000:01:00.0/drm/card1
[ 7508.437] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 13 paused 0
[ 7508.438] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 7508.438] (--) PCI:*(1@0:0:0) 10de:2484:3842:3755 rev 161, Mem @ 0xde000000/16777216, 0xfa00000000/8589934592, 0xfc00000000/33554432, I/O @ 0x0000f000/128, BIOS @ 0x????????/524288
[ 7508.438] (II) LoadModule: "glx"
[ 7508.439] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 7508.439] (II) Module glx: vendor="X.Org Foundation"
[ 7508.439] compiled for 1.21.1.24, module version = 1.0.0
[ 7508.439] ABI class: X.Org Server Extension, version 10.0
[ 7508.439] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[ 7508.439] loading driver: nvidia
[ 7508.439] (==) Matched nvidia as autoconfigured driver 0
[ 7508.439] (==) Matched nouveau as autoconfigured driver 1
[ 7508.439] (==) Matched nv as autoconfigured driver 2
[ 7508.439] (==) Matched modesetting as autoconfigured driver 3
[ 7508.439] (==) Matched fbdev as autoconfigured driver 4
[ 7508.439] (==) Matched vesa as autoconfigured driver 5
[ 7508.439] (==) Assigned the driver to the xf86ConfigLayout
[ 7508.439] (II) LoadModule: "nvidia"
[ 7508.439] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 7508.441] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 7508.441] compiled for 1.16.99.901, module version = 1.0.0
[ 7508.441] Module class: X.Org Video Driver
[ 7508.441] (II) LoadModule: "nouveau"
[ 7508.442] (WW) Warning, couldn't open module nouveau
[ 7508.442] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 7508.442] (II) LoadModule: "nv"
[ 7508.442] (WW) Warning, couldn't open module nv
[ 7508.442] (EE) Failed to load module "nv" (module does not exist, 0)
[ 7508.442] (II) LoadModule: "modesetting"
[ 7508.442] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 7508.442] (II) Module modesetting: vendor="X.Org Foundation"
[ 7508.442] compiled for 1.21.1.24, module version = 1.21.1
[ 7508.442] Module class: X.Org Video Driver
[ 7508.442] ABI class: X.Org Video Driver, version 25.2
[ 7508.442] (II) LoadModule: "fbdev"
[ 7508.442] (WW) Warning, couldn't open module fbdev
[ 7508.442] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 7508.442] (II) LoadModule: "vesa"
[ 7508.442] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 7508.442] (II) Module vesa: vendor="X.Org Foundation"
[ 7508.442] compiled for 1.21.1.21, module version = 2.6.0
[ 7508.442] Module class: X.Org Video Driver
[ 7508.442] ABI class: X.Org Video Driver, version 25.2
[ 7508.442] (II) NVIDIA dlloader X Driver 615.71.09 Fri Sep 4 22:06:07 UTC 2026
[ 7508.442] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 7508.442] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 7508.442] (II) VESA: driver for VESA chipsets: vesa
[ 7508.442] xf86EnableIO: failed to enable I/O ports access (Operation not permitted)
[ 7508.442] (II) systemd-logind: releasing fd for 226:1
[ 7508.443] (II) Loading sub module "fb"
[ 7508.443] (II) LoadModule: "fb"
[ 7508.443] (II) Module "fb" already built-in
[ 7508.443] (II) Loading sub module "wfb"
[ 7508.443] (II) LoadModule: "wfb"
[ 7508.443] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 7508.443] (II) Module wfb: vendor="X.Org Foundation"
[ 7508.443] compiled for 1.21.1.24, module version = 1.0.0
[ 7508.443] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7508.444] (WW) Falling back to old probe method for modesetting
[ 7508.444] (EE) open /dev/dri/card0: No such file or directory
[ 7508.444] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 7508.444] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 7508.444] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 7508.444] (==) NVIDIA(0): RGB weight 888
[ 7508.444] (==) NVIDIA(0): Default visual is TrueColor
[ 7508.444] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 7508.444] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 7508.444] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 7508.444] (**) NVIDIA(0): Enabling 2D acceleration
[ 7508.444] (II) Loading sub module "glxserver_nvidia"
[ 7508.444] (II) LoadModule: "glxserver_nvidia"
[ 7508.444] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 7508.453] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 7508.453] compiled for 1.16.99.901, module version = 1.0.0
[ 7508.453] Module class: X.Org Server Extension
[ 7508.453] (II) NVIDIA GLX Module 615.71.09 Fri Sep 4 22:06:07 UTC 2026
[ 7508.453] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 7508.460] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 7508.460] (--) NVIDIA(0): DFP-0
[ 7508.460] (--) NVIDIA(0): DFP-1 (boot)
[ 7508.460] (--) NVIDIA(0): DFP-2
[ 7508.460] (--) NVIDIA(0): DFP-3
[ 7508.460] (--) NVIDIA(0): DFP-4
[ 7508.460] (--) NVIDIA(0): DFP-5
[ 7508.460] (--) NVIDIA(0): DFP-6
[ 7508.486] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 3070 (GA104-A) at PCI:1:0:0
[ 7508.486] (II) NVIDIA(0): (GPU-0)
[ 7508.486] (--) NVIDIA(0): Memory: 8388608 kBytes
[ 7508.486] (--) NVIDIA(0): VideoBIOS: 94.04.3a.80.37
[ 7508.486] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 7508.584] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 7508.584] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 7508.584] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[ 7508.584] (--) NVIDIA(GPU-0):
[ 7508.588] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): connected
[ 7508.588] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): Internal DisplayPort
[ 7508.588] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): 2670.0 MHz maximum pixel clock
[ 7508.588] (--) NVIDIA(GPU-0):
[ 7508.592] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 7508.592] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 7508.592] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 7508.592] (--) NVIDIA(GPU-0):
[ 7508.593] (--) NVIDIA(GPU-0): Microstep MSI MPG27CQ (DFP-3): connected
[ 7508.593] (--) NVIDIA(GPU-0): Microstep MSI MPG27CQ (DFP-3): Internal DisplayPort
[ 7508.593] (--) NVIDIA(GPU-0): Microstep MSI MPG27CQ (DFP-3): 2670.0 MHz maximum pixel clock
[ 7508.593] (--) NVIDIA(GPU-0):
[ 7508.596] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 7508.596] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 7508.596] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[ 7508.596] (--) NVIDIA(GPU-0):
[ 7508.596] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 7508.596] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[ 7508.596] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[ 7508.596] (--) NVIDIA(GPU-0):
[ 7508.596] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 7508.596] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS
[ 7508.596] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock
[ 7508.596] (--) NVIDIA(GPU-0):
[ 7508.694] (==) NVIDIA(0):
[ 7508.694] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 7508.694] (==) NVIDIA(0): will be used as the requested mode.
[ 7508.694] (==) NVIDIA(0):
[ 7508.700] (II) NVIDIA(0): Validated MetaModes:
[ 7508.700] (II) NVIDIA(0): "DFP-1:nvidia-auto-select,DFP-3:nvidia-auto-select"
[ 7508.700] (II) NVIDIA(0): Virtual screen size determined to be 5120 x 1440
[ 7508.900] (--) NVIDIA(0): DPI set to (108, 107); computed from "UseEdidDpi" X config
[ 7508.900] (--) NVIDIA(0): option
[ 7508.900] (II) UnloadModule: "modesetting"
[ 7508.900] (II) Unloading modesetting
[ 7508.900] (II) UnloadModule: "vesa"
[ 7508.900] (II) Unloading vesa
[ 7508.903] (WW) NVIDIA: Failed to bind sideband socket to
[ 7508.903] (WW) NVIDIA: '/var/run/nvidia-xdriver-2093dec8' Permission denied
[ 7508.906] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 7508.906] (II) NVIDIA: access.
[ 7508.921] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 7508.921] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 7508.921] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 7508.921] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 7508.921] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 7508.921] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 7508.921] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 7508.921] (II) NVIDIA(0): Config Options in the README.
[ 7508.938] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select,DFP-3:nvidia-auto-select"
[ 7509.054] (II) NVIDIA(0): Disabling shared memory pixmaps
[ 7509.054] (==) NVIDIA(0): Backing store enabled
[ 7509.054] (==) NVIDIA(0): Silken mouse enabled
[ 7509.054] (==) NVIDIA(0): DPMS enabled
[ 7509.054] (II) Loading sub module "dri2"
[ 7509.054] (II) LoadModule: "dri2"
[ 7509.054] (II) Module "dri2" already built-in
[ 7509.054] (II) NVIDIA(0): [DRI2] Setup complete
[ 7509.054] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 7509.054] (II) Initializing extension Generic Event Extension
[ 7509.054] (II) Initializing extension SHAPE
[ 7509.054] (II) Initializing extension MIT-SHM
[ 7509.054] (II) Initializing extension XInputExtension
[ 7509.054] (II) Initializing extension XTEST
[ 7509.054] (II) Initializing extension BIG-REQUESTS
[ 7509.054] (II) Initializing extension SYNC
[ 7509.055] (II) Initializing extension XKEYBOARD
[ 7509.055] (II) Initializing extension XC-MISC
[ 7509.055] (II) Initializing extension SECURITY
[ 7509.055] (II) Initializing extension XFIXES
[ 7509.055] (II) Initializing extension RENDER
[ 7509.055] (II) Initializing extension RANDR
[ 7509.055] (II) Initializing extension COMPOSITE
[ 7509.055] (II) Initializing extension DAMAGE
[ 7509.055] (II) Initializing extension MIT-SCREEN-SAVER
[ 7509.055] (II) Initializing extension DOUBLE-BUFFER
[ 7509.055] (II) Initializing extension RECORD
[ 7509.055] (II) Initializing extension DPMS
[ 7509.055] (II) Initializing extension Present
[ 7509.055] (II) Initializing extension DRI3
[ 7509.055] (II) Initializing extension X-Resource
[ 7509.055] (II) Initializing extension XVideo
[ 7509.055] (II) Initializing extension XVideo-MotionCompensation
[ 7509.056] (II) Initializing extension GLX
[ 7509.056] (II) Initializing extension GLX
[ 7509.056] (II) Indirect GLX disabled.
[ 7509.056] (II) GLX: Another vendor is already registered for screen 0
[ 7509.056] (II) Initializing extension XFree86-VidModeExtension
[ 7509.056] (II) Initializing extension XFree86-DGA
[ 7509.056] (II) Initializing extension XFree86-DRI
[ 7509.056] (II) Initializing extension DRI2
[ 7509.056] (II) Initializing extension NV-GLX
[ 7509.056] (II) Initializing extension NV-CONTROL
[ 7509.056] (II) Initializing extension XINERAMA
[ 7509.100] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event11)
[ 7509.100] (II) No input driver specified, ignoring this device.
[ 7509.100] (II) This device may have been added with another device file.
[ 7509.100] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event12)
[ 7509.100] (II) No input driver specified, ignoring this device.
[ 7509.100] (II) This device may have been added with another device file.
[ 7509.100] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
[ 7509.100] (II) No input driver specified, ignoring this device.
[ 7509.100] (II) This device may have been added with another device file.
[ 7509.100] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
[ 7509.100] (II) No input driver specified, ignoring this device.
[ 7509.100] (II) This device may have been added with another device file.
[ 7509.100] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 7509.100] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 7509.100] (II) LoadModule: "libinput"
[ 7509.100] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 7509.102] (II) Module libinput: vendor="X.Org Foundation"
[ 7509.102] compiled for 1.21.1.13, module version = 1.5.0
[ 7509.102] Module class: X.Org XInput Driver
[ 7509.102] ABI class: X.Org XInput driver, version 24.4
[ 7509.102] (II) Using input driver 'libinput' for 'Video Bus'
[ 7509.102] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 39 paused 0
[ 7509.102] (**) Video Bus: always reports core events
[ 7509.102] (**) Option "Device" "/dev/input/event9"
[ 7509.103] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 7509.103] (II) event9 - Video Bus: device is a keyboard
[ 7509.103] (II) event9 - Video Bus: device removed
[ 7509.103] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/acpi.video_bus.0/input/input11/event9"
[ 7509.103] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 7509.103] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 7509.103] (II) event9 - Video Bus: device is a keyboard
[ 7509.104] (II) config/udev: Adding input device Keychron Keychron Q3 (/dev/input/event2)
[ 7509.104] (**) Keychron Keychron Q3: Applying InputClass "libinput keyboard catchall"
[ 7509.104] (II) Using input driver 'libinput' for 'Keychron Keychron Q3'
[ 7509.104] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 42 paused 0
[ 7509.104] (**) Keychron Keychron Q3: always reports core events
[ 7509.104] (**) Option "Device" "/dev/input/event2"
[ 7509.105] (II) event2 - Keychron Keychron Q3: is tagged by udev as: Keyboard
[ 7509.105] (II) event2 - Keychron Keychron Q3: device is a keyboard
[ 7509.105] (II) event2 - Keychron Keychron Q3: device removed
[ 7509.105] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.1/5-1.1:1.0/0003:3434:0120.0001/input/input2/event2"
[ 7509.105] (II) XINPUT: Adding extended input device "Keychron Keychron Q3" (type: KEYBOARD, id 7)
[ 7509.105] (II) event2 - Keychron Keychron Q3: is tagged by udev as: Keyboard
[ 7509.105] (II) event2 - Keychron Keychron Q3: device is a keyboard
[ 7509.106] (II) config/udev: Adding input device Keychron Keychron Q3 Mouse (/dev/input/event3)
[ 7509.106] (**) Keychron Keychron Q3 Mouse: Applying InputClass "libinput pointer catchall"
[ 7509.106] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Mouse'
[ 7509.106] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 43 paused 0
[ 7509.106] (**) Keychron Keychron Q3 Mouse: always reports core events
[ 7509.106] (**) Option "Device" "/dev/input/event3"
[ 7509.107] (II) event3 - Keychron Keychron Q3 Mouse: is tagged by udev as: Mouse
[ 7509.107] (II) event3 - Keychron Keychron Q3 Mouse: device is a pointer
[ 7509.107] (II) event3 - Keychron Keychron Q3 Mouse: device removed
[ 7509.107] (II) libinput: Keychron Keychron Q3 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7509.107] (II) libinput: Keychron Keychron Q3 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7509.107] (II) libinput: Keychron Keychron Q3 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7509.107] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.1/5-1.1:1.2/0003:3434:0120.0003/input/input3/event3"
[ 7509.107] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Mouse" (type: MOUSE, id 8)
[ 7509.107] (**) Option "AccelerationScheme" "none"
[ 7509.107] (**) Keychron Keychron Q3 Mouse: (accel) selected scheme none/0
[ 7509.107] (**) Keychron Keychron Q3 Mouse: (accel) acceleration factor: 2.000
[ 7509.107] (**) Keychron Keychron Q3 Mouse: (accel) acceleration threshold: 4
[ 7509.108] (II) event3 - Keychron Keychron Q3 Mouse: is tagged by udev as: Mouse
[ 7509.108] (II) event3 - Keychron Keychron Q3 Mouse: device is a pointer
[ 7509.108] (II) config/udev: Adding input device Keychron Keychron Q3 Mouse (/dev/input/mouse0)
[ 7509.108] (II) No input driver specified, ignoring this device.
[ 7509.108] (II) This device may have been added with another device file.
[ 7509.108] (II) config/udev: Adding input device Keychron Keychron Q3 System Control (/dev/input/event4)
[ 7509.108] (**) Keychron Keychron Q3 System Control: Applying InputClass "libinput keyboard catchall"
[ 7509.108] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 System Control'
[ 7509.109] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 44 paused 0
[ 7509.109] (**) Keychron Keychron Q3 System Control: always reports core events
[ 7509.109] (**) Option "Device" "/dev/input/event4"
[ 7509.109] (II) event4 - Keychron Keychron Q3 System Control: is tagged by udev as: Keyboard Joystick
[ 7509.109] (II) event4 - Keychron Keychron Q3 System Control: device is a keyboard
[ 7509.109] (II) event4 - Keychron Keychron Q3 System Control: device removed
[ 7509.109] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.1/5-1.1:1.2/0003:3434:0120.0003/input/input4/event4"
[ 7509.109] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 System Control" (type: KEYBOARD, id 9)
[ 7509.110] (II) event4 - Keychron Keychron Q3 System Control: is tagged by udev as: Keyboard Joystick
[ 7509.110] (II) event4 - Keychron Keychron Q3 System Control: device is a keyboard
[ 7509.110] (II) config/udev: Adding input device Keychron Keychron Q3 Consumer Control (/dev/input/event5)
[ 7509.110] (**) Keychron Keychron Q3 Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 7509.110] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Consumer Control'
[ 7509.111] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 45 paused 0
[ 7509.111] (**) Keychron Keychron Q3 Consumer Control: always reports core events
[ 7509.111] (**) Option "Device" "/dev/input/event5"
[ 7509.111] (II) event5 - Keychron Keychron Q3 Consumer Control: is tagged by udev as: Keyboard
[ 7509.111] (II) event5 - Keychron Keychron Q3 Consumer Control: device is a keyboard
[ 7509.111] (II) event5 - Keychron Keychron Q3 Consumer Control: device removed
[ 7509.111] (II) libinput: Keychron Keychron Q3 Consumer Control: needs a virtual subdevice
[ 7509.111] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.1/5-1.1:1.2/0003:3434:0120.0003/input/input5/event5"
[ 7509.111] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Consumer Control" (type: MOUSE, id 10)
[ 7509.111] (**) Option "AccelerationScheme" "none"
[ 7509.111] (**) Keychron Keychron Q3 Consumer Control: (accel) selected scheme none/0
[ 7509.111] (**) Keychron Keychron Q3 Consumer Control: (accel) acceleration factor: 2.000
[ 7509.111] (**) Keychron Keychron Q3 Consumer Control: (accel) acceleration threshold: 4
[ 7509.112] (II) event5 - Keychron Keychron Q3 Consumer Control: is tagged by udev as: Keyboard
[ 7509.112] (II) event5 - Keychron Keychron Q3 Consumer Control: device is a keyboard
[ 7509.112] (II) config/udev: Adding input device Keychron Keychron Q3 Keyboard (/dev/input/event6)
[ 7509.112] (**) Keychron Keychron Q3 Keyboard: Applying InputClass "libinput keyboard catchall"
[ 7509.112] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Keyboard'
[ 7509.113] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 46 paused 0
[ 7509.113] (**) Keychron Keychron Q3 Keyboard: always reports core events
[ 7509.113] (**) Option "Device" "/dev/input/event6"
[ 7509.113] (II) event6 - Keychron Keychron Q3 Keyboard: is tagged by udev as: Keyboard
[ 7509.113] (II) event6 - Keychron Keychron Q3 Keyboard: device is a keyboard
[ 7509.113] (II) event6 - Keychron Keychron Q3 Keyboard: device removed
[ 7509.113] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.1/5-1.1:1.2/0003:3434:0120.0003/input/input6/event6"
[ 7509.113] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Keyboard" (type: KEYBOARD, id 11)
[ 7509.114] (II) event6 - Keychron Keychron Q3 Keyboard: is tagged by udev as: Keyboard
[ 7509.114] (II) event6 - Keychron Keychron Q3 Keyboard: device is a keyboard
[ 7509.114] (II) config/udev: Adding input device Logitech G502 HERO Gaming Mouse (/dev/input/event7)
[ 7509.114] (**) Logitech G502 HERO Gaming Mouse: Applying InputClass "libinput pointer catchall"
[ 7509.114] (II) Using input driver 'libinput' for 'Logitech G502 HERO Gaming Mouse'
[ 7509.166] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 47 paused 0
[ 7509.166] (**) Logitech G502 HERO Gaming Mouse: always reports core events
[ 7509.166] (**) Option "Device" "/dev/input/event7"
[ 7509.167] (II) event7 - Logitech G502 HERO Gaming Mouse: is tagged by udev as: Mouse
[ 7509.167] (II) event7 - Logitech G502 HERO Gaming Mouse: device set to 2400 DPI
[ 7509.167] (II) event7 - Logitech G502 HERO Gaming Mouse: device is a pointer
[ 7509.167] (II) event7 - Logitech G502 HERO Gaming Mouse: device removed
[ 7509.167] (II) libinput: Logitech G502 HERO Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7509.167] (II) libinput: Logitech G502 HERO Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7509.167] (II) libinput: Logitech G502 HERO Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7509.167] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.2/5-1.2:1.0/0003:046D:C08B.0004/input/input7/event7"
[ 7509.167] (II) XINPUT: Adding extended input device "Logitech G502 HERO Gaming Mouse" (type: MOUSE, id 12)
[ 7509.167] (**) Option "AccelerationScheme" "none"
[ 7509.167] (**) Logitech G502 HERO Gaming Mouse: (accel) selected scheme none/0
[ 7509.167] (**) Logitech G502 HERO Gaming Mouse: (accel) acceleration factor: 2.000
[ 7509.167] (**) Logitech G502 HERO Gaming Mouse: (accel) acceleration threshold: 4
[ 7509.168] (II) event7 - Logitech G502 HERO Gaming Mouse: is tagged by udev as: Mouse
[ 7509.168] (II) event7 - Logitech G502 HERO Gaming Mouse: device set to 2400 DPI
[ 7509.168] (II) event7 - Logitech G502 HERO Gaming Mouse: device is a pointer
[ 7509.168] (II) config/udev: Adding input device Logitech G502 HERO Gaming Mouse (/dev/input/mouse1)
[ 7509.168] (II) No input driver specified, ignoring this device.
[ 7509.168] (II) This device may have been added with another device file.
[ 7509.169] (II) config/udev: Adding input device Logitech G502 HERO Gaming Mouse Keyboard (/dev/input/event8)
[ 7509.169] (**) Logitech G502 HERO Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[ 7509.169] (II) Using input driver 'libinput' for 'Logitech G502 HERO Gaming Mouse Keyboard'
[ 7509.169] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 48 paused 0
[ 7509.169] (**) Logitech G502 HERO Gaming Mouse Keyboard: always reports core events
[ 7509.169] (**) Option "Device" "/dev/input/event8"
[ 7509.170] (II) event8 - Logitech G502 HERO Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[ 7509.170] (II) event8 - Logitech G502 HERO Gaming Mouse Keyboard: device is a keyboard
[ 7509.170] (II) event8 - Logitech G502 HERO Gaming Mouse Keyboard: device removed
[ 7509.170] (II) libinput: Logitech G502 HERO Gaming Mouse Keyboard: needs a virtual subdevice
[ 7509.170] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.2/5-1.2:1.1/0003:046D:C08B.0005/input/input8/event8"
[ 7509.170] (II) XINPUT: Adding extended input device "Logitech G502 HERO Gaming Mouse Keyboard" (type: MOUSE, id 13)
[ 7509.170] (**) Option "AccelerationScheme" "none"
[ 7509.170] (**) Logitech G502 HERO Gaming Mouse Keyboard: (accel) selected scheme none/0
[ 7509.170] (**) Logitech G502 HERO Gaming Mouse Keyboard: (accel) acceleration factor: 2.000
[ 7509.170] (**) Logitech G502 HERO Gaming Mouse Keyboard: (accel) acceleration threshold: 4
[ 7509.171] (II) event8 - Logitech G502 HERO Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[ 7509.171] (II) event8 - Logitech G502 HERO Gaming Mouse Keyboard: device is a keyboard
[ 7509.171] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 7509.171] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 7509.171] (II) Using input driver 'libinput' for 'Power Button'
[ 7509.171] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 49 paused 0
[ 7509.171] (**) Power Button: always reports core events
[ 7509.171] (**) Option "Device" "/dev/input/event1"
[ 7509.172] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 7509.172] (II) event1 - Power Button: device is a keyboard
[ 7509.172] (II) event1 - Power Button: device removed
[ 7509.172] (**) Option "config_info" "udev:/sys/devices/platform/LNXPWRBN:00/input/input1/event1"
[ 7509.172] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 14)
[ 7509.172] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 7509.172] (II) event1 - Power Button: device is a keyboard
[ 7509.172] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 7509.172] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 7509.172] (II) Using input driver 'libinput' for 'Power Button'
[ 7509.172] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 50 paused 0
[ 7509.172] (**) Power Button: always reports core events
[ 7509.172] (**) Option "Device" "/dev/input/event0"
[ 7509.173] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 7509.173] (II) event0 - Power Button: device is a keyboard
[ 7509.173] (II) event0 - Power Button: device removed
[ 7509.173] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C0C:00/input/input0/event0"
[ 7509.173] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 15)
[ 7509.173] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 7509.173] (II) event0 - Power Button: device is a keyboard
[ 7509.173] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[ 7509.173] (II) No input driver specified, ignoring this device.
[ 7509.173] (II) This device may have been added with another device file.
[ 7509.176] (**) Keychron Keychron Q3 Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 7509.176] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Consumer Control'
[ 7509.176] (II) systemd-logind: returning pre-existing fd for /dev/input/event5 13:69
[ 7509.176] (**) Keychron Keychron Q3 Consumer Control: always reports core events
[ 7509.176] (**) Option "Device" "/dev/input/event5"
[ 7509.176] (II) libinput: Keychron Keychron Q3 Consumer Control: is a virtual subdevice
[ 7509.176] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.1/5-1.1:1.2/0003:3434:0120.0003/input/input5/event5"
[ 7509.176] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Consumer Control" (type: KEYBOARD, id 16)
[ 7509.176] (**) Logitech G502 HERO Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[ 7509.176] (II) Using input driver 'libinput' for 'Logitech G502 HERO Gaming Mouse Keyboard'
[ 7509.176] (II) systemd-logind: returning pre-existing fd for /dev/input/event8 13:72
[ 7509.176] (**) Logitech G502 HERO Gaming Mouse Keyboard: always reports core events
[ 7509.176] (**) Option "Device" "/dev/input/event8"
[ 7509.176] (II) libinput: Logitech G502 HERO Gaming Mouse Keyboard: is a virtual subdevice
[ 7509.176] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.2/5-1.2:1.1/0003:046D:C08B.0005/input/input8/event8"
[ 7509.176] (II) XINPUT: Adding extended input device "Logitech G502 HERO Gaming Mouse Keyboard" (type: KEYBOARD, id 17)
[ 7509.570] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 7509.570] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 7509.570] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[ 7509.570] (--) NVIDIA(GPU-0):
[ 7509.572] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): connected
[ 7509.572] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): Internal DisplayPort
[ 7509.572] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): 2670.0 MHz maximum pixel clock
[ 7509.572] (--) NVIDIA(GPU-0):
[ 7509.576] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 7509.576] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 7509.576] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 7509.576] (--) NVIDIA(GPU-0):
[ 7509.577] (--) NVIDIA(GPU-0): Microstep MSI MPG27CQ (DFP-3): connected
[ 7509.577] (--) NVIDIA(GPU-0): Microstep MSI MPG27CQ (DFP-3): Internal DisplayPort
[ 7509.577] (--) NVIDIA(GPU-0): Microstep MSI MPG27CQ (DFP-3): 2670.0 MHz maximum pixel clock
[ 7509.577] (--) NVIDIA(GPU-0):
[ 7509.579] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 7509.579] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 7509.579] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[ 7509.579] (--) NVIDIA(GPU-0):
[ 7509.579] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 7509.579] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[ 7509.579] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[ 7509.579] (--) NVIDIA(GPU-0):
[ 7509.579] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 7509.579] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS
[ 7509.579] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock
[ 7509.579] (--) NVIDIA(GPU-0):
[ 7511.250] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 7511.250] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 7511.250] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[ 7511.250] (--) NVIDIA(GPU-0):
[ 7511.252] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): connected
[ 7511.252] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): Internal DisplayPort
[ 7511.252] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): 2670.0 MHz maximum pixel clock
[ 7511.252] (--) NVIDIA(GPU-0):
[ 7511.255] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 7511.255] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 7511.255] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 7511.255] (--) NVIDIA(GPU-0):
[ 7511.257] (--) NVIDIA(GPU-0): Microstep MSI MPG27CQ (DFP-3): connected
[ 7511.257] (--) NVIDIA(GPU-0): Microstep MSI MPG27CQ (DFP-3): Internal DisplayPort
[ 7511.257] (--) NVIDIA(GPU-0): Microstep MSI MPG27CQ (DFP-3): 2670.0 MHz maximum pixel clock
[ 7511.257] (--) NVIDIA(GPU-0):
[ 7511.260] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 7511.260] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 7511.260] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[ 7511.260] (--) NVIDIA(GPU-0):
[ 7511.260] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 7511.260] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[ 7511.260] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[ 7511.260] (--) NVIDIA(GPU-0):
[ 7511.260] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 7511.260] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS
[ 7511.260] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock
[ 7511.260] (--) NVIDIA(GPU-0):
[ 7665.462] (**) Option "fd" "39"
[ 7665.462] (II) event9 - Video Bus: device removed
[ 7665.462] (**) Option "fd" "42"
[ 7665.462] (II) event2 - Keychron Keychron Q3: device removed
[ 7665.462] (**) Option "fd" "43"
[ 7665.462] (II) event3 - Keychron Keychron Q3 Mouse: device removed
[ 7665.462] (**) Option "fd" "44"
[ 7665.462] (II) event4 - Keychron Keychron Q3 System Control: device removed
[ 7665.462] (**) Option "fd" "45"
[ 7665.462] (**) Option "fd" "46"
[ 7665.462] (II) event6 - Keychron Keychron Q3 Keyboard: device removed
[ 7665.462] (**) Option "fd" "47"
[ 7665.462] (II) event7 - Logitech G502 HERO Gaming Mouse: device removed
[ 7665.463] (**) Option "fd" "48"
[ 7665.463] (**) Option "fd" "49"
[ 7665.463] (II) event1 - Power Button: device removed
[ 7665.463] (**) Option "fd" "50"
[ 7665.463] (II) event0 - Power Button: device removed
[ 7665.463] (**) Option "fd" "45"
[ 7665.463] (II) event5 - Keychron Keychron Q3 Consumer Control: device removed
[ 7665.463] (**) Option "fd" "48"
[ 7665.463] (II) event8 - Logitech G502 HERO Gaming Mouse Keyboard: device removed
[ 7665.652] (II) systemd-logind: got pause for 13:70
[ 7665.652] (II) systemd-logind: got pause for 13:65
[ 7665.652] (II) systemd-logind: got pause for 13:73
[ 7665.652] (II) systemd-logind: got pause for 13:64
[ 7665.652] (II) systemd-logind: got pause for 13:66
[ 7665.652] (II) systemd-logind: got pause for 13:67
[ 7665.652] (II) systemd-logind: got pause for 13:71
[ 7665.652] (II) systemd-logind: got pause for 13:69
[ 7665.652] (II) systemd-logind: got pause for 13:72
[ 7665.652] (II) systemd-logind: got pause for 13:68
[ 7665.652] (II) config/udev: removing device Keychron Keychron Q3 System Control
[ 7665.652] (II) UnloadModule: "libinput"
[ 7665.652] (II) systemd-logind: releasing fd for 13:68
[ 7665.664] (II) config/udev: Adding input device Keychron Keychron Q3 System Control (/dev/input/event4)
[ 7665.664] (**) Keychron Keychron Q3 System Control: Applying InputClass "libinput keyboard catchall"
[ 7665.664] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 System Control'
[ 7665.665] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 39 paused 1
[ 7665.665] (II) systemd-logind: releasing fd for 13:68
[ 7672.938] (II) systemd-logind: got resume for 13:70
[ 7672.984] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 7672.984] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 7672.984] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[ 7672.984] (--) NVIDIA(GPU-0):
[ 7672.985] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): connected
[ 7672.985] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): Internal DisplayPort
[ 7672.985] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): 2670.0 MHz maximum pixel clock
[ 7672.985] (--) NVIDIA(GPU-0):
[ 7672.988] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 7672.988] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 7672.988] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 7672.988] (--) NVIDIA(GPU-0):
[ 7672.989] (--) NVIDIA(GPU-0): Microstep MSI MPG27CQ (DFP-3): connected
[ 7672.989] (--) NVIDIA(GPU-0): Microstep MSI MPG27CQ (DFP-3): Internal DisplayPort
[ 7672.989] (--) NVIDIA(GPU-0): Microstep MSI MPG27CQ (DFP-3): 2670.0 MHz maximum pixel clock
[ 7672.989] (--) NVIDIA(GPU-0):
[ 7672.992] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 7672.992] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 7672.992] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[ 7672.992] (--) NVIDIA(GPU-0):
[ 7672.992] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 7672.992] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[ 7672.992] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[ 7672.992] (--) NVIDIA(GPU-0):
[ 7672.992] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 7672.992] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS
[ 7672.992] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock
[ 7672.992] (--) NVIDIA(GPU-0):
[ 7673.080] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select,DFP-3:nvidia-auto-select"
[ 7673.140] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 7673.140] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 7673.140] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 7673.140] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 7673.140] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 7673.140] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 7673.140] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 7673.140] (II) NVIDIA(0): Config Options in the README.
[ 7673.171] (II) event6 - Keychron Keychron Q3 Keyboard: is tagged by udev as: Keyboard
[ 7673.171] (II) event6 - Keychron Keychron Q3 Keyboard: device is a keyboard
[ 7673.171] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 System Control'
[ 7673.171] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 78 paused 0
[ 7673.171] (**) Keychron Keychron Q3 System Control: always reports core events
[ 7673.171] (**) Option "Device" "/dev/input/event4"
[ 7673.172] (II) event4 - Keychron Keychron Q3 System Control: is tagged by udev as: Keyboard Joystick
[ 7673.172] (II) event4 - Keychron Keychron Q3 System Control: device is a keyboard
[ 7673.172] (II) event4 - Keychron Keychron Q3 System Control: device removed
[ 7673.172] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.1/5-1.1:1.2/0003:3434:0120.0003/input/input4/event4"
[ 7673.172] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 System Control" (type: KEYBOARD, id 9)
[ 7673.173] (II) event4 - Keychron Keychron Q3 System Control: is tagged by udev as: Keyboard Joystick
[ 7673.173] (II) event4 - Keychron Keychron Q3 System Control: device is a keyboard
[ 7673.173] (II) systemd-logind: got resume for 13:65
[ 7673.173] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 7673.173] (II) event1 - Power Button: device is a keyboard
[ 7673.173] (II) systemd-logind: got resume for 13:73
[ 7673.173] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 7673.173] (II) event9 - Video Bus: device is a keyboard
[ 7673.173] (II) systemd-logind: got resume for 13:64
[ 7673.174] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 7673.174] (II) event0 - Power Button: device is a keyboard
[ 7673.174] (II) systemd-logind: got resume for 13:66
[ 7673.174] (II) event2 - Keychron Keychron Q3: is tagged by udev as: Keyboard
[ 7673.174] (II) event2 - Keychron Keychron Q3: device is a keyboard
[ 7673.174] (II) systemd-logind: got resume for 13:67
[ 7673.175] (II) event3 - Keychron Keychron Q3 Mouse: is tagged by udev as: Mouse
[ 7673.175] (II) event3 - Keychron Keychron Q3 Mouse: device is a pointer
[ 7673.175] (II) systemd-logind: got resume for 13:71
[ 7673.175] (II) event7 - Logitech G502 HERO Gaming Mouse: is tagged by udev as: Mouse
[ 7673.175] (II) event7 - Logitech G502 HERO Gaming Mouse: device set to 2400 DPI
[ 7673.175] (II) event7 - Logitech G502 HERO Gaming Mouse: device is a pointer
[ 7673.176] (II) systemd-logind: got resume for 13:69
[ 7673.176] (II) event5 - Keychron Keychron Q3 Consumer Control: is tagged by udev as: Keyboard
[ 7673.176] (II) event5 - Keychron Keychron Q3 Consumer Control: device is a keyboard
[ 7673.176] (II) systemd-logind: got resume for 13:72
[ 7673.177] (II) event8 - Logitech G502 HERO Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[ 7673.177] (II) event8 - Logitech G502 HERO Gaming Mouse Keyboard: device is a keyboard
[ 7673.177] (II) config/udev: removing device Keychron Keychron Q3 System Control
[ 7673.177] (**) Option "fd" "78"
[ 7673.177] (II) event4 - Keychron Keychron Q3 System Control: device removed
[ 7673.177] (II) UnloadModule: "libinput"
[ 7673.177] (II) systemd-logind: releasing fd for 13:68
[ 7673.178] (II) config/udev: Adding input device Keychron Keychron Q3 System Control (/dev/input/event4)
[ 7673.178] (**) Keychron Keychron Q3 System Control: Applying InputClass "libinput keyboard catchall"
[ 7673.178] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 System Control'
[ 7673.178] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 76 paused 0
[ 7673.178] (**) Keychron Keychron Q3 System Control: always reports core events
[ 7673.178] (**) Option "Device" "/dev/input/event4"
[ 7673.178] (II) event4 - Keychron Keychron Q3 System Control: is tagged by udev as: Keyboard Joystick
[ 7673.178] (II) event4 - Keychron Keychron Q3 System Control: device is a keyboard
[ 7673.178] (II) event4 - Keychron Keychron Q3 System Control: device removed
[ 7673.178] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.1/5-1.1:1.2/0003:3434:0120.0003/input/input4/event4"
[ 7673.178] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 System Control" (type: KEYBOARD, id 9)
[ 7673.179] (II) event4 - Keychron Keychron Q3 System Control: is tagged by udev as: Keyboard Joystick
[ 7673.179] (II) event4 - Keychron Keychron Q3 System Control: device is a keyboardAnd here is my Xorg log from when I resumed my system into a black screen while running DWM (Remember that I had to force terminate and kill programs using REISUB):
[ 1302.174]
X.Org X Server 1.21.1.24
X Protocol Version 11, Revision 0
[ 1302.174] Current Operating System: Linux alcyoneus 7.2.8-arch1-2 #1 SMP PREEMPT_DYNAMIC Thu, 01 Oct 2026 17:24:20 +0000 x86_64
[ 1302.174] Kernel command line: rd.luks.name=9005398e-1363-4824-800a-1715a5176b46=root rd.luks.options=discard,password-echo=no root=/dev/mapper/root rw quiet nvidia_drm.modeset=1
[ 1302.174]
[ 1302.174] Current version of pixman: 0.46.4
[ 1302.174] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1302.174] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1302.174] (==) Log file: "/home/retro/.local/share/xorg/Xorg.0.log", Time: Sat Oct 3 17:24:14 2026
[ 1302.174] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1302.174] (==) No Layout section. Using the first Screen section.
[ 1302.174] (==) No screen section available. Using defaults.
[ 1302.174] (**) |-->Screen "Default Screen Section" (0)
[ 1302.174] (**) | |-->Monitor "<default monitor>"
[ 1302.174] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1302.174] (**) Allowing byte-swapped clients
[ 1302.174] (==) Automatically adding devices
[ 1302.174] (==) Automatically enabling devices
[ 1302.174] (==) Automatically adding GPU devices
[ 1302.174] (==) Automatically binding GPU devices
[ 1302.174] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 1302.174] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 1302.174] Entry deleted from font path.
[ 1302.174] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 1302.174] Entry deleted from font path.
[ 1302.174] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 1302.174] Entry deleted from font path.
[ 1302.174] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 1302.174] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1302.174] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1302.174] (II) Module ABI versions:
[ 1302.174] X.Org ANSI C Emulation: 0.4
[ 1302.174] X.Org Video Driver: 25.2
[ 1302.174] X.Org XInput driver : 24.4
[ 1302.174] X.Org Server Extension : 10.0
[ 1302.174] (++) using VT number 1
[ 1302.175] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 1302.175] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 1302.175] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.1/0000:01:00.0/drm/card1
[ 1302.176] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 13 paused 0
[ 1302.176] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 1302.177] (--) PCI:*(1@0:0:0) 10de:2484:3842:3755 rev 161, Mem @ 0xde000000/16777216, 0xfa00000000/8589934592, 0xfc00000000/33554432, I/O @ 0x0000f000/128, BIOS @ 0x????????/524288
[ 1302.177] (II) LoadModule: "glx"
[ 1302.177] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1302.177] (II) Module glx: vendor="X.Org Foundation"
[ 1302.177] compiled for 1.21.1.24, module version = 1.0.0
[ 1302.177] ABI class: X.Org Server Extension, version 10.0
[ 1302.177] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[ 1302.177] loading driver: nvidia
[ 1302.177] (==) Matched nvidia as autoconfigured driver 0
[ 1302.177] (==) Matched nouveau as autoconfigured driver 1
[ 1302.177] (==) Matched nv as autoconfigured driver 2
[ 1302.177] (==) Matched modesetting as autoconfigured driver 3
[ 1302.177] (==) Matched fbdev as autoconfigured driver 4
[ 1302.177] (==) Matched vesa as autoconfigured driver 5
[ 1302.177] (==) Assigned the driver to the xf86ConfigLayout
[ 1302.177] (II) LoadModule: "nvidia"
[ 1302.177] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 1302.177] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 1302.177] compiled for 1.16.99.901, module version = 1.0.0
[ 1302.177] Module class: X.Org Video Driver
[ 1302.177] (II) LoadModule: "nouveau"
[ 1302.177] (WW) Warning, couldn't open module nouveau
[ 1302.177] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 1302.177] (II) LoadModule: "nv"
[ 1302.177] (WW) Warning, couldn't open module nv
[ 1302.177] (EE) Failed to load module "nv" (module does not exist, 0)
[ 1302.177] (II) LoadModule: "modesetting"
[ 1302.177] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 1302.177] (II) Module modesetting: vendor="X.Org Foundation"
[ 1302.177] compiled for 1.21.1.24, module version = 1.21.1
[ 1302.177] Module class: X.Org Video Driver
[ 1302.177] ABI class: X.Org Video Driver, version 25.2
[ 1302.177] (II) LoadModule: "fbdev"
[ 1302.177] (WW) Warning, couldn't open module fbdev
[ 1302.177] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 1302.177] (II) LoadModule: "vesa"
[ 1302.178] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 1302.178] (II) Module vesa: vendor="X.Org Foundation"
[ 1302.178] compiled for 1.21.1.21, module version = 2.6.0
[ 1302.178] Module class: X.Org Video Driver
[ 1302.178] ABI class: X.Org Video Driver, version 25.2
[ 1302.178] (II) NVIDIA dlloader X Driver 615.71.09 Fri Sep 4 22:06:07 UTC 2026
[ 1302.178] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 1302.178] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 1302.178] (II) VESA: driver for VESA chipsets: vesa
[ 1302.178] xf86EnableIO: failed to enable I/O ports access (Operation not permitted)
[ 1302.178] (II) systemd-logind: releasing fd for 226:1
[ 1302.178] (II) Loading sub module "fb"
[ 1302.178] (II) LoadModule: "fb"
[ 1302.178] (II) Module "fb" already built-in
[ 1302.178] (II) Loading sub module "wfb"
[ 1302.178] (II) LoadModule: "wfb"
[ 1302.178] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 1302.178] (II) Module wfb: vendor="X.Org Foundation"
[ 1302.178] compiled for 1.21.1.24, module version = 1.0.0
[ 1302.178] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1302.178] (WW) Falling back to old probe method for modesetting
[ 1302.178] (EE) open /dev/dri/card0: No such file or directory
[ 1302.178] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 1302.178] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1302.178] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 1302.178] (==) NVIDIA(0): RGB weight 888
[ 1302.178] (==) NVIDIA(0): Default visual is TrueColor
[ 1302.178] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1302.178] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 1302.178] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 1302.178] (**) NVIDIA(0): Enabling 2D acceleration
[ 1302.178] (II) Loading sub module "glxserver_nvidia"
[ 1302.178] (II) LoadModule: "glxserver_nvidia"
[ 1302.178] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 1302.182] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 1302.182] compiled for 1.16.99.901, module version = 1.0.0
[ 1302.182] Module class: X.Org Server Extension
[ 1302.182] (II) NVIDIA GLX Module 615.71.09 Fri Sep 4 22:06:07 UTC 2026
[ 1302.182] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 1302.190] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 1302.190] (--) NVIDIA(0): DFP-0
[ 1302.190] (--) NVIDIA(0): DFP-1
[ 1302.190] (--) NVIDIA(0): DFP-2
[ 1302.190] (--) NVIDIA(0): DFP-3 (boot)
[ 1302.190] (--) NVIDIA(0): DFP-4
[ 1302.190] (--) NVIDIA(0): DFP-5
[ 1302.190] (--) NVIDIA(0): DFP-6
[ 1302.227] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 3070 (GA104-A) at PCI:1:0:0
[ 1302.227] (II) NVIDIA(0): (GPU-0)
[ 1302.227] (--) NVIDIA(0): Memory: 8388608 kBytes
[ 1302.227] (--) NVIDIA(0): VideoBIOS: 94.04.3a.80.37
[ 1302.227] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 1302.306] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 1302.306] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 1302.306] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[ 1302.306] (--) NVIDIA(GPU-0):
[ 1302.310] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): connected
[ 1302.310] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): Internal DisplayPort
[ 1302.310] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): 2670.0 MHz maximum pixel clock
[ 1302.310] (--) NVIDIA(GPU-0):
[ 1302.314] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 1302.314] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 1302.314] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 1302.314] (--) NVIDIA(GPU-0):
[ 1302.317] (--) NVIDIA(GPU-0): Microstep MSI MPG27CQ (DFP-3): connected
[ 1302.318] (--) NVIDIA(GPU-0): Microstep MSI MPG27CQ (DFP-3): Internal DisplayPort
[ 1302.318] (--) NVIDIA(GPU-0): Microstep MSI MPG27CQ (DFP-3): 2670.0 MHz maximum pixel clock
[ 1302.318] (--) NVIDIA(GPU-0):
[ 1302.320] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 1302.320] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 1302.320] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[ 1302.320] (--) NVIDIA(GPU-0):
[ 1302.320] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 1302.320] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[ 1302.320] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[ 1302.320] (--) NVIDIA(GPU-0):
[ 1302.321] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 1302.321] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS
[ 1302.321] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock
[ 1302.321] (--) NVIDIA(GPU-0):
[ 1302.425] (==) NVIDIA(0):
[ 1302.425] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 1302.425] (==) NVIDIA(0): will be used as the requested mode.
[ 1302.425] (==) NVIDIA(0):
[ 1302.430] (II) NVIDIA(0): Validated MetaModes:
[ 1302.430] (II) NVIDIA(0): "DFP-3:nvidia-auto-select,DFP-1:nvidia-auto-select"
[ 1302.430] (II) NVIDIA(0): Virtual screen size determined to be 5120 x 1440
[ 1302.755] (--) NVIDIA(0): DPI set to (108, 107); computed from "UseEdidDpi" X config
[ 1302.755] (--) NVIDIA(0): option
[ 1302.755] (II) UnloadModule: "modesetting"
[ 1302.755] (II) Unloading modesetting
[ 1302.755] (II) UnloadModule: "vesa"
[ 1302.755] (II) Unloading vesa
[ 1302.756] (WW) NVIDIA: Failed to bind sideband socket to
[ 1302.756] (WW) NVIDIA: '/var/run/nvidia-xdriver-50474b88' Permission denied
[ 1302.758] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 1302.758] (II) NVIDIA: access.
[ 1302.772] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 1302.772] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 1302.772] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 1302.772] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 1302.772] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 1302.772] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 1302.772] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 1302.772] (II) NVIDIA(0): Config Options in the README.
[ 1302.789] (II) NVIDIA(0): Setting mode "DFP-3:nvidia-auto-select,DFP-1:nvidia-auto-select"
[ 1302.912] (II) NVIDIA(0): Disabling shared memory pixmaps
[ 1302.912] (==) NVIDIA(0): Backing store enabled
[ 1302.912] (==) NVIDIA(0): Silken mouse enabled
[ 1302.912] (==) NVIDIA(0): DPMS enabled
[ 1302.912] (II) Loading sub module "dri2"
[ 1302.912] (II) LoadModule: "dri2"
[ 1302.912] (II) Module "dri2" already built-in
[ 1302.912] (II) NVIDIA(0): [DRI2] Setup complete
[ 1302.912] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 1302.912] (II) Initializing extension Generic Event Extension
[ 1302.912] (II) Initializing extension SHAPE
[ 1302.912] (II) Initializing extension MIT-SHM
[ 1302.912] (II) Initializing extension XInputExtension
[ 1302.912] (II) Initializing extension XTEST
[ 1302.912] (II) Initializing extension BIG-REQUESTS
[ 1302.913] (II) Initializing extension SYNC
[ 1302.913] (II) Initializing extension XKEYBOARD
[ 1302.913] (II) Initializing extension XC-MISC
[ 1302.913] (II) Initializing extension SECURITY
[ 1302.913] (II) Initializing extension XFIXES
[ 1302.913] (II) Initializing extension RENDER
[ 1302.913] (II) Initializing extension RANDR
[ 1302.913] (II) Initializing extension COMPOSITE
[ 1302.913] (II) Initializing extension DAMAGE
[ 1302.913] (II) Initializing extension MIT-SCREEN-SAVER
[ 1302.913] (II) Initializing extension DOUBLE-BUFFER
[ 1302.913] (II) Initializing extension RECORD
[ 1302.913] (II) Initializing extension DPMS
[ 1302.913] (II) Initializing extension Present
[ 1302.913] (II) Initializing extension DRI3
[ 1302.913] (II) Initializing extension X-Resource
[ 1302.913] (II) Initializing extension XVideo
[ 1302.913] (II) Initializing extension XVideo-MotionCompensation
[ 1302.913] (II) Initializing extension GLX
[ 1302.913] (II) Initializing extension GLX
[ 1302.913] (II) Indirect GLX disabled.
[ 1302.913] (II) GLX: Another vendor is already registered for screen 0
[ 1302.913] (II) Initializing extension XFree86-VidModeExtension
[ 1302.913] (II) Initializing extension XFree86-DGA
[ 1302.914] (II) Initializing extension XFree86-DRI
[ 1302.914] (II) Initializing extension DRI2
[ 1302.914] (II) Initializing extension NV-GLX
[ 1302.914] (II) Initializing extension NV-CONTROL
[ 1302.914] (II) Initializing extension XINERAMA
[ 1302.957] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event11)
[ 1302.957] (II) No input driver specified, ignoring this device.
[ 1302.957] (II) This device may have been added with another device file.
[ 1302.957] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event12)
[ 1302.957] (II) No input driver specified, ignoring this device.
[ 1302.957] (II) This device may have been added with another device file.
[ 1302.957] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
[ 1302.957] (II) No input driver specified, ignoring this device.
[ 1302.957] (II) This device may have been added with another device file.
[ 1302.957] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
[ 1302.957] (II) No input driver specified, ignoring this device.
[ 1302.957] (II) This device may have been added with another device file.
[ 1302.957] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 1302.957] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 1302.957] (II) LoadModule: "libinput"
[ 1302.958] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 1302.958] (II) Module libinput: vendor="X.Org Foundation"
[ 1302.958] compiled for 1.21.1.13, module version = 1.5.0
[ 1302.958] Module class: X.Org XInput Driver
[ 1302.958] ABI class: X.Org XInput driver, version 24.4
[ 1302.958] (II) Using input driver 'libinput' for 'Video Bus'
[ 1302.959] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 39 paused 0
[ 1302.959] (**) Video Bus: always reports core events
[ 1302.959] (**) Option "Device" "/dev/input/event9"
[ 1302.960] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 1302.960] (II) event9 - Video Bus: device is a keyboard
[ 1302.960] (II) event9 - Video Bus: device removed
[ 1302.960] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/acpi.video_bus.0/input/input11/event9"
[ 1302.960] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 1302.960] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 1302.960] (II) event9 - Video Bus: device is a keyboard
[ 1302.961] (II) config/udev: Adding input device Keychron Keychron Q3 (/dev/input/event2)
[ 1302.961] (**) Keychron Keychron Q3: Applying InputClass "libinput keyboard catchall"
[ 1302.961] (II) Using input driver 'libinput' for 'Keychron Keychron Q3'
[ 1302.961] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 42 paused 0
[ 1302.961] (**) Keychron Keychron Q3: always reports core events
[ 1302.961] (**) Option "Device" "/dev/input/event2"
[ 1302.962] (II) event2 - Keychron Keychron Q3: is tagged by udev as: Keyboard
[ 1302.962] (II) event2 - Keychron Keychron Q3: device is a keyboard
[ 1302.962] (II) event2 - Keychron Keychron Q3: device removed
[ 1302.962] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.1/5-1.1:1.0/0003:3434:0120.0001/input/input2/event2"
[ 1302.962] (II) XINPUT: Adding extended input device "Keychron Keychron Q3" (type: KEYBOARD, id 7)
[ 1302.963] (II) event2 - Keychron Keychron Q3: is tagged by udev as: Keyboard
[ 1302.963] (II) event2 - Keychron Keychron Q3: device is a keyboard
[ 1302.963] (II) config/udev: Adding input device Keychron Keychron Q3 Mouse (/dev/input/event3)
[ 1302.963] (**) Keychron Keychron Q3 Mouse: Applying InputClass "libinput pointer catchall"
[ 1302.963] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Mouse'
[ 1302.963] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 43 paused 0
[ 1302.963] (**) Keychron Keychron Q3 Mouse: always reports core events
[ 1302.963] (**) Option "Device" "/dev/input/event3"
[ 1302.964] (II) event3 - Keychron Keychron Q3 Mouse: is tagged by udev as: Mouse
[ 1302.964] (II) event3 - Keychron Keychron Q3 Mouse: device is a pointer
[ 1302.964] (II) event3 - Keychron Keychron Q3 Mouse: device removed
[ 1302.964] (II) libinput: Keychron Keychron Q3 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 1302.964] (II) libinput: Keychron Keychron Q3 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 1302.964] (II) libinput: Keychron Keychron Q3 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 1302.964] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.1/5-1.1:1.2/0003:3434:0120.0003/input/input3/event3"
[ 1302.964] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Mouse" (type: MOUSE, id 8)
[ 1302.964] (**) Option "AccelerationScheme" "none"
[ 1302.964] (**) Keychron Keychron Q3 Mouse: (accel) selected scheme none/0
[ 1302.964] (**) Keychron Keychron Q3 Mouse: (accel) acceleration factor: 2.000
[ 1302.964] (**) Keychron Keychron Q3 Mouse: (accel) acceleration threshold: 4
[ 1302.965] (II) event3 - Keychron Keychron Q3 Mouse: is tagged by udev as: Mouse
[ 1302.965] (II) event3 - Keychron Keychron Q3 Mouse: device is a pointer
[ 1302.965] (II) config/udev: Adding input device Keychron Keychron Q3 Mouse (/dev/input/mouse0)
[ 1302.965] (II) No input driver specified, ignoring this device.
[ 1302.965] (II) This device may have been added with another device file.
[ 1302.966] (II) config/udev: Adding input device Keychron Keychron Q3 System Control (/dev/input/event4)
[ 1302.966] (**) Keychron Keychron Q3 System Control: Applying InputClass "libinput keyboard catchall"
[ 1302.966] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 System Control'
[ 1302.966] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 44 paused 0
[ 1302.966] (**) Keychron Keychron Q3 System Control: always reports core events
[ 1302.966] (**) Option "Device" "/dev/input/event4"
[ 1302.967] (II) event4 - Keychron Keychron Q3 System Control: is tagged by udev as: Keyboard Joystick
[ 1302.967] (II) event4 - Keychron Keychron Q3 System Control: device is a keyboard
[ 1302.967] (II) event4 - Keychron Keychron Q3 System Control: device removed
[ 1302.967] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.1/5-1.1:1.2/0003:3434:0120.0003/input/input4/event4"
[ 1302.967] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 System Control" (type: KEYBOARD, id 9)
[ 1302.967] (II) event4 - Keychron Keychron Q3 System Control: is tagged by udev as: Keyboard Joystick
[ 1302.967] (II) event4 - Keychron Keychron Q3 System Control: device is a keyboard
[ 1302.968] (II) config/udev: Adding input device Keychron Keychron Q3 Consumer Control (/dev/input/event5)
[ 1302.968] (**) Keychron Keychron Q3 Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 1302.968] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Consumer Control'
[ 1302.968] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 45 paused 0
[ 1302.968] (**) Keychron Keychron Q3 Consumer Control: always reports core events
[ 1302.968] (**) Option "Device" "/dev/input/event5"
[ 1302.969] (II) event5 - Keychron Keychron Q3 Consumer Control: is tagged by udev as: Keyboard
[ 1302.969] (II) event5 - Keychron Keychron Q3 Consumer Control: device is a keyboard
[ 1302.969] (II) event5 - Keychron Keychron Q3 Consumer Control: device removed
[ 1302.969] (II) libinput: Keychron Keychron Q3 Consumer Control: needs a virtual subdevice
[ 1302.969] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.1/5-1.1:1.2/0003:3434:0120.0003/input/input5/event5"
[ 1302.969] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Consumer Control" (type: MOUSE, id 10)
[ 1302.969] (**) Option "AccelerationScheme" "none"
[ 1302.969] (**) Keychron Keychron Q3 Consumer Control: (accel) selected scheme none/0
[ 1302.969] (**) Keychron Keychron Q3 Consumer Control: (accel) acceleration factor: 2.000
[ 1302.969] (**) Keychron Keychron Q3 Consumer Control: (accel) acceleration threshold: 4
[ 1302.969] (II) event5 - Keychron Keychron Q3 Consumer Control: is tagged by udev as: Keyboard
[ 1302.969] (II) event5 - Keychron Keychron Q3 Consumer Control: device is a keyboard
[ 1302.970] (II) config/udev: Adding input device Keychron Keychron Q3 Keyboard (/dev/input/event6)
[ 1302.970] (**) Keychron Keychron Q3 Keyboard: Applying InputClass "libinput keyboard catchall"
[ 1302.970] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Keyboard'
[ 1302.970] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 46 paused 0
[ 1302.970] (**) Keychron Keychron Q3 Keyboard: always reports core events
[ 1302.970] (**) Option "Device" "/dev/input/event6"
[ 1302.971] (II) event6 - Keychron Keychron Q3 Keyboard: is tagged by udev as: Keyboard
[ 1302.971] (II) event6 - Keychron Keychron Q3 Keyboard: device is a keyboard
[ 1302.971] (II) event6 - Keychron Keychron Q3 Keyboard: device removed
[ 1302.971] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.1/5-1.1:1.2/0003:3434:0120.0003/input/input6/event6"
[ 1302.971] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Keyboard" (type: KEYBOARD, id 11)
[ 1302.971] (II) event6 - Keychron Keychron Q3 Keyboard: is tagged by udev as: Keyboard
[ 1302.971] (II) event6 - Keychron Keychron Q3 Keyboard: device is a keyboard
[ 1302.972] (II) config/udev: Adding input device Logitech G502 HERO Gaming Mouse (/dev/input/event7)
[ 1302.972] (**) Logitech G502 HERO Gaming Mouse: Applying InputClass "libinput pointer catchall"
[ 1302.972] (II) Using input driver 'libinput' for 'Logitech G502 HERO Gaming Mouse'
[ 1303.023] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 47 paused 0
[ 1303.023] (**) Logitech G502 HERO Gaming Mouse: always reports core events
[ 1303.023] (**) Option "Device" "/dev/input/event7"
[ 1303.024] (II) event7 - Logitech G502 HERO Gaming Mouse: is tagged by udev as: Mouse
[ 1303.024] (II) event7 - Logitech G502 HERO Gaming Mouse: device set to 2400 DPI
[ 1303.024] (II) event7 - Logitech G502 HERO Gaming Mouse: device is a pointer
[ 1303.024] (II) event7 - Logitech G502 HERO Gaming Mouse: device removed
[ 1303.024] (II) libinput: Logitech G502 HERO Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 1303.024] (II) libinput: Logitech G502 HERO Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 1303.024] (II) libinput: Logitech G502 HERO Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 1303.024] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.2/5-1.2:1.0/0003:046D:C08B.0004/input/input7/event7"
[ 1303.024] (II) XINPUT: Adding extended input device "Logitech G502 HERO Gaming Mouse" (type: MOUSE, id 12)
[ 1303.024] (**) Option "AccelerationScheme" "none"
[ 1303.024] (**) Logitech G502 HERO Gaming Mouse: (accel) selected scheme none/0
[ 1303.024] (**) Logitech G502 HERO Gaming Mouse: (accel) acceleration factor: 2.000
[ 1303.024] (**) Logitech G502 HERO Gaming Mouse: (accel) acceleration threshold: 4
[ 1303.025] (II) event7 - Logitech G502 HERO Gaming Mouse: is tagged by udev as: Mouse
[ 1303.025] (II) event7 - Logitech G502 HERO Gaming Mouse: device set to 2400 DPI
[ 1303.025] (II) event7 - Logitech G502 HERO Gaming Mouse: device is a pointer
[ 1303.025] (II) config/udev: Adding input device Logitech G502 HERO Gaming Mouse (/dev/input/mouse1)
[ 1303.025] (II) No input driver specified, ignoring this device.
[ 1303.025] (II) This device may have been added with another device file.
[ 1303.026] (II) config/udev: Adding input device Logitech G502 HERO Gaming Mouse Keyboard (/dev/input/event8)
[ 1303.026] (**) Logitech G502 HERO Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[ 1303.026] (II) Using input driver 'libinput' for 'Logitech G502 HERO Gaming Mouse Keyboard'
[ 1303.026] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 48 paused 0
[ 1303.026] (**) Logitech G502 HERO Gaming Mouse Keyboard: always reports core events
[ 1303.026] (**) Option "Device" "/dev/input/event8"
[ 1303.027] (II) event8 - Logitech G502 HERO Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[ 1303.028] (II) event8 - Logitech G502 HERO Gaming Mouse Keyboard: device is a keyboard
[ 1303.028] (II) event8 - Logitech G502 HERO Gaming Mouse Keyboard: device removed
[ 1303.028] (II) libinput: Logitech G502 HERO Gaming Mouse Keyboard: needs a virtual subdevice
[ 1303.028] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.2/5-1.2:1.1/0003:046D:C08B.0005/input/input8/event8"
[ 1303.028] (II) XINPUT: Adding extended input device "Logitech G502 HERO Gaming Mouse Keyboard" (type: MOUSE, id 13)
[ 1303.028] (**) Option "AccelerationScheme" "none"
[ 1303.028] (**) Logitech G502 HERO Gaming Mouse Keyboard: (accel) selected scheme none/0
[ 1303.028] (**) Logitech G502 HERO Gaming Mouse Keyboard: (accel) acceleration factor: 2.000
[ 1303.028] (**) Logitech G502 HERO Gaming Mouse Keyboard: (accel) acceleration threshold: 4
[ 1303.028] (II) event8 - Logitech G502 HERO Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[ 1303.028] (II) event8 - Logitech G502 HERO Gaming Mouse Keyboard: device is a keyboard
[ 1303.029] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 1303.029] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 1303.029] (II) Using input driver 'libinput' for 'Power Button'
[ 1303.029] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 49 paused 0
[ 1303.029] (**) Power Button: always reports core events
[ 1303.029] (**) Option "Device" "/dev/input/event1"
[ 1303.029] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 1303.029] (II) event1 - Power Button: device is a keyboard
[ 1303.029] (II) event1 - Power Button: device removed
[ 1303.029] (**) Option "config_info" "udev:/sys/devices/platform/LNXPWRBN:00/input/input1/event1"
[ 1303.029] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 14)
[ 1303.029] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 1303.029] (II) event1 - Power Button: device is a keyboard
[ 1303.030] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 1303.030] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 1303.030] (II) Using input driver 'libinput' for 'Power Button'
[ 1303.030] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 50 paused 0
[ 1303.030] (**) Power Button: always reports core events
[ 1303.030] (**) Option "Device" "/dev/input/event0"
[ 1303.030] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 1303.030] (II) event0 - Power Button: device is a keyboard
[ 1303.030] (II) event0 - Power Button: device removed
[ 1303.030] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C0C:00/input/input0/event0"
[ 1303.030] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 15)
[ 1303.030] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 1303.030] (II) event0 - Power Button: device is a keyboard
[ 1303.031] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[ 1303.031] (II) No input driver specified, ignoring this device.
[ 1303.031] (II) This device may have been added with another device file.
[ 1303.033] (**) Keychron Keychron Q3 Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 1303.033] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Consumer Control'
[ 1303.033] (II) systemd-logind: returning pre-existing fd for /dev/input/event5 13:69
[ 1303.033] (**) Keychron Keychron Q3 Consumer Control: always reports core events
[ 1303.033] (**) Option "Device" "/dev/input/event5"
[ 1303.033] (II) libinput: Keychron Keychron Q3 Consumer Control: is a virtual subdevice
[ 1303.033] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.1/5-1.1:1.2/0003:3434:0120.0003/input/input5/event5"
[ 1303.033] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Consumer Control" (type: KEYBOARD, id 16)
[ 1303.033] (**) Logitech G502 HERO Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[ 1303.033] (II) Using input driver 'libinput' for 'Logitech G502 HERO Gaming Mouse Keyboard'
[ 1303.033] (II) systemd-logind: returning pre-existing fd for /dev/input/event8 13:72
[ 1303.033] (**) Logitech G502 HERO Gaming Mouse Keyboard: always reports core events
[ 1303.033] (**) Option "Device" "/dev/input/event8"
[ 1303.033] (II) libinput: Logitech G502 HERO Gaming Mouse Keyboard: is a virtual subdevice
[ 1303.033] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.2/5-1.2:1.1/0003:046D:C08B.0005/input/input8/event8"
[ 1303.033] (II) XINPUT: Adding extended input device "Logitech G502 HERO Gaming Mouse Keyboard" (type: KEYBOARD, id 17)
[ 1394.399] (**) Option "fd" "39"
[ 1394.399] (II) event9 - Video Bus: device removed
[ 1394.399] (**) Option "fd" "42"
[ 1394.399] (II) event2 - Keychron Keychron Q3: device removed
[ 1394.399] (**) Option "fd" "43"
[ 1394.399] (II) event3 - Keychron Keychron Q3 Mouse: device removed
[ 1394.399] (**) Option "fd" "44"
[ 1394.399] (II) event4 - Keychron Keychron Q3 System Control: device removed
[ 1394.399] (**) Option "fd" "45"
[ 1394.399] (**) Option "fd" "46"
[ 1394.399] (II) event6 - Keychron Keychron Q3 Keyboard: device removed
[ 1394.399] (**) Option "fd" "47"
[ 1394.399] (II) event7 - Logitech G502 HERO Gaming Mouse: device removed
[ 1394.399] (**) Option "fd" "48"
[ 1394.399] (**) Option "fd" "49"
[ 1394.399] (II) event1 - Power Button: device removed
[ 1394.399] (**) Option "fd" "50"
[ 1394.399] (II) event0 - Power Button: device removed
[ 1394.399] (**) Option "fd" "45"
[ 1394.399] (II) event5 - Keychron Keychron Q3 Consumer Control: device removed
[ 1394.399] (**) Option "fd" "48"
[ 1394.399] (II) event8 - Logitech G502 HERO Gaming Mouse Keyboard: device removed
[ 1394.663] (II) systemd-logind: got pause for 13:67
[ 1394.663] (II) systemd-logind: got pause for 13:73
[ 1394.663] (II) systemd-logind: got pause for 13:69
[ 1394.663] (II) systemd-logind: got pause for 13:70
[ 1394.663] (II) systemd-logind: got pause for 13:72
[ 1394.663] (II) systemd-logind: got pause for 13:65
[ 1394.663] (II) systemd-logind: got pause for 13:68
[ 1394.663] (II) systemd-logind: got pause for 13:71
[ 1394.663] (II) systemd-logind: got pause for 13:64
[ 1394.663] (II) systemd-logind: got pause for 13:66
[ 1394.663] (II) config/udev: removing device Keychron Keychron Q3 System Control
[ 1394.663] (II) UnloadModule: "libinput"
[ 1394.663] (II) systemd-logind: releasing fd for 13:68
[ 1394.664] (II) config/udev: Adding input device Keychron Keychron Q3 System Control (/dev/input/event4)
[ 1394.664] (**) Keychron Keychron Q3 System Control: Applying InputClass "libinput keyboard catchall"
[ 1394.664] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 System Control'
[ 1394.665] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 39 paused 1
[ 1394.665] (II) systemd-logind: releasing fd for 13:68
[ 1400.637] (II) config/udev: Adding input device Keychron Keychron Q3 System Control (/dev/input/event4)
[ 1400.637] (**) Keychron Keychron Q3 System Control: Applying InputClass "libinput keyboard catchall"
[ 1400.637] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 System Control'
[ 1400.727] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 50 paused 0
[ 1400.727] (**) Keychron Keychron Q3 System Control: always reports core events
[ 1400.727] (**) Option "Device" "/dev/input/event4"
[ 1400.728] (II) event4 - Keychron Keychron Q3 System Control: is tagged by udev as: Keyboard Joystick
[ 1400.728] (II) event4 - Keychron Keychron Q3 System Control: device is a keyboard
[ 1400.728] (II) event4 - Keychron Keychron Q3 System Control: device removed
[ 1400.728] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:0f:00.0/usb5/5-1/5-1.1/5-1.1:1.2/0003:3434:0120.0003/input/input4/event4"
[ 1400.728] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 System Control" (type: KEYBOARD, id 9)
[ 1450.455] (II) UnloadModule: "libinput"
[ 1450.455] (II) systemd-logind: not releasing fd for 13:72, still in use
[ 1450.455] (II) UnloadModule: "libinput"
[ 1450.455] (II) systemd-logind: not releasing fd for 13:69, still in use
[ 1450.455] (II) UnloadModule: "libinput"
[ 1450.455] (II) systemd-logind: releasing fd for 13:64
[ 1450.455] (EE) systemd-logind: failed to release device: Connection was disconnected before a reply was received
[ 1450.455] (II) UnloadModule: "libinput"
[ 1450.455] (II) systemd-logind: releasing fd for 13:65
[ 1450.455] (EE) systemd-logind: failed to release device: Connection is closed
[ 1450.455] (II) UnloadModule: "libinput"
[ 1450.455] (II) systemd-logind: releasing fd for 13:72
[ 1450.455] (EE) systemd-logind: failed to release device: Connection is closed
[ 1450.455] (II) UnloadModule: "libinput"
[ 1450.455] (II) systemd-logind: releasing fd for 13:71
[ 1450.455] (EE) systemd-logind: failed to release device: Connection is closed
[ 1450.455] (II) UnloadModule: "libinput"
[ 1450.455] (II) systemd-logind: releasing fd for 13:70
[ 1450.455] (EE) systemd-logind: failed to release device: Connection is closed
[ 1450.455] (II) UnloadModule: "libinput"
[ 1450.455] (II) systemd-logind: releasing fd for 13:69
[ 1450.455] (EE) systemd-logind: failed to release device: Connection is closed
[ 1450.455] (II) UnloadModule: "libinput"
[ 1450.455] (II) systemd-logind: releasing fd for 13:67
[ 1450.455] (EE) systemd-logind: failed to release device: Connection is closed
[ 1450.455] (II) UnloadModule: "libinput"
[ 1450.455] (II) systemd-logind: releasing fd for 13:66
[ 1450.455] (EE) systemd-logind: failed to release device: Connection is closed
[ 1450.455] (II) UnloadModule: "libinput"
[ 1450.455] (II) systemd-logind: releasing fd for 13:73
[ 1450.455] (EE) systemd-logind: failed to release device: Connection is closed
[ 1450.456] (II) UnloadModule: "libinput"
[ 1450.456] (II) systemd-logind: releasing fd for 13:68
[ 1450.456] (EE) systemd-logind: failed to release device: Connection is closed
[ 1450.560] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 1450.560] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[ 1450.560] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[ 1450.560] (WW) xf86OpenConsole: VT_GETSTATE failed: Input/output error
[ 1450.560] (EE) systemd-logind: ReleaseControl failed: Connection is closed
[ 1450.560] (II) Server terminated successfully (0). Closing log file.Just to add some additional information, here is what's located inside my '/etc/X11/Xwrapper.config'. It looks like in the wiki that this is something you should do with the proprietary driver now.
needs_root_rights = noHere is my .xinitrc
#!/bin/sh
prefix="/usr"
exec_prefix="${prefix}"
xrdb="xrdb"
xinitdir="/etc/X11/xinit"
xclock="xclock"
xterm="xterm"
twm="twm"
xmodmap="xmodmap"
userresources="$HOME/.Xresources"
usermodmap="$HOME/.Xmodmap"
sysresources="$xinitdir/.Xresources"
sysmodmap="$xinitdir/.Xmodmap"
# merge in defaults and keymaps
if [ -f "$sysresources" ]; then
if [ -x /usr/bin/cpp ] ; then
"$xrdb" -merge "$sysresources"
else
"$xrdb" -nocpp -merge "$sysresources"
fi
fi
if [ -f "$sysmodmap" ]; then
"$xmodmap" "$sysmodmap"
fi
if [ -f "$userresources" ]; then
if [ -x /usr/bin/cpp ] ; then
"$xrdb" -merge "$userresources"
else
"$xrdb" -nocpp -merge "$userresources"
fi
fi
if [ -f "$usermodmap" ]; then
"$xmodmap" "$usermodmap"
fi
# start some nice programs
if [ -d "$xinitdir"/xinitrc.d ] ; then
for f in "$xinitdir/xinitrc.d"/?*.sh ; do
[ -x "$f" ] && . "$f"
done
unset f
fi
exec dwmOutside of this resume from sleep issue, everything else works fine. I'll appreciate any help. I'm kind of at a loss as to what KDE could be doing differently, and what changed since I last used Xorg about 3-5 years ago.
Last edited by RetroThief (2026-10-03 23:15:18)
Offline
#2 2026-10-03 22:13:47
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,120
Re: [SOLVED] X11 Failing to Resume From Suspend to RAM (S3)
[ 7509.109] (II) event4 - Keychron Keychron Q3 System Control: is tagged by udev as: Keyboard JoystickOffline
#3 2026-10-03 23:13:53
- RetroThief
- Member
- Registered: 2021-02-01
- Posts: 9
Re: [SOLVED] X11 Failing to Resume From Suspend to RAM (S3)
Dude, no way. Thank you so much, that worked entirely. I would have never guessed at all that it's because my keyboard creates a joystick tag, or something of that nature. After plugging in some dusty normal keyboard of mine, I was able to resume from sleep in DWM just fine.
Offline