You are not logged in.

Pages: 1

#1 2026-10-07 13:51:58

IpMaan
Member
Registered: 2026-10-07
Posts: 3

Low to no sound from one side of wired headphones (intermittenetly)

So, I got a new PC and decided to install arch (without any desktop environment, use sway as my dwm). I have these wired headphones with type-c connector and usb adapter. The headphones are fine, I use them daily in office. When I connect to my PC, it is hit or miss, one side may get no to low volume, other times it behaves normally. Earlier I had to rotate the type-c connector or swap the usb port. Now i have to restart and check it the issue is there or not.
I am using pipewire, wireplumber etc to handle audio.  I am using deepseek (I don't have programming background) to help with finding what the issue is, but have been unsuccessful (just giving status of heaphones, alta or something similar). It did ask me to install a few stuff but I haven't so far.
Can someone help with how to solve the issue I am having

Offline

#2 2026-10-07 22:28:29

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,405

Re: Low to no sound from one side of wired headphones (intermittenetly)

Post 

sudo journalctl -f #Plug the headphones in while this is running, post the output
pactl list cards
pactl list sinks

during reproduction wrapped in  [code][/code] tags

Last edited by V1del (2026-10-07 22:28:59)

Offline

#3 Yesterday 12:59:33

IpMaan
Member
Registered: 2026-10-07
Posts: 3

Re: Low to no sound from one side of wired headphones (intermittenetly)

on a fresh boot, plugged in the headphones after login, and issue is present
hopefully the formatting is fine

sudo journalctl -f
Oct 08 18:21:32 arch-pc kernel: input: YJX-CHIP USB MOUSE Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.2/1-14.2:1.1/0003:A8A4:2255.000E/input/input49
Oct 08 18:21:32 arch-pc kernel: input: YJX-CHIP USB MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.2/1-14.2:1.1/0003:A8A4:2255.000E/input/input50
Oct 08 18:21:32 arch-pc kernel: input: YJX-CHIP USB MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.2/1-14.2:1.1/0003:A8A4:2255.000E/input/input51
Oct 08 18:21:32 arch-pc kernel: hid-generic 0003:A8A4:2255.000E: input,hiddev101,hidraw6: USB HID v1.10 Keyboard [YJX-CHIP USB MOUSE] on usb-0000:00:14.0-14.2/input1
Oct 08 18:21:32 arch-pc kernel: hid-generic 0003:A8A4:2255.000F: hiddev102,hidraw7: USB HID v1.10 Device [YJX-CHIP USB MOUSE] on usb-0000:00:14.0-14.2/input2
Oct 08 18:21:32 arch-pc systemd-logind[557]: Watching system buttons on /dev/input/event20 (YJX-CHIP USB MOUSE Keyboard)
Oct 08 18:21:32 arch-pc systemd-logind[557]: Watching system buttons on /dev/input/event18 (YJX-CHIP USB MOUSE System Control)
Oct 08 18:21:32 arch-pc systemd-logind[557]: Watching system buttons on /dev/input/event17 (YJX-CHIP USB MOUSE Consumer Control)
Oct 08 18:22:09 arch-pc sudo[2049]:    abhay : TTY=pts/0 ; PWD=/home/abhay ; USER=root ; COMMAND=/usr/bin/journalctl -f
Oct 08 18:22:09 arch-pc sudo[2049]: pam_unix(sudo:session): session opened for user root(uid=0) by abhay(uid=1000)

running the above command didn't return back standard bash input, and had to Ctrl+C to run other commands

pactl list cards
Card #43
	Name: alsa_card.pci-0000_01_00.1
	Driver: alsa
	Owner Module: n/a
	Properties:
		device.enum.api = "udev"
		device.api = "alsa"
		media.class = "Audio/Device"
		api.alsa.path = "hw:1"
		api.alsa.card = "1"
		api.alsa.card.name = "HDA NVidia"
		api.alsa.card.longname = "HDA NVidia at 0x82080000 irq 17"
		device.plugged.usec = "6465224"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
		device.bus = "pci"
		device.subsystem = "sound"
		device.vendor.id = "0x10de"
		device.vendor.name = "NVIDIA Corporation"
		device.product.id = "0x1aeb"
		device.product.name = "TU116 High Definition Audio Controller"
		device.name = "alsa_card.pci-0000_01_00.1"
		device.description = "TU116 High Definition Audio Controller"
		device.nick = "HDA NVidia"
		device.icon_name = "audio-card-analog-pci"
		api.alsa.use-acp = "true"
		api.acp.auto-profile = "false"
		api.acp.auto-port = "false"
		api.dbus.ReserveDevice1.Priority = "-20"
		api.alsa.split-enable = "true"
		api.dbus.ReserveDevice1 = "Audio1"
		spa.object.id = "4"
		factory.id = "15"
		client.id = "42"
		object.id = "43"
		object.serial = "43"
		object.path = "alsa:acp:NVidia"
		alsa.card = "1"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0x82080000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "Nvidia GPU 99 HDMI/DP"
		alsa.components = "HDA:10de0099,10de1366,00100100"
		alsa.id = "NVidia"
		device.string = "1"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: yes)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
		pro-audio: Pro Audio (sinks: 4, sources: 0, priority: 1, available: yes)
	Active Profile: output:hdmi-stereo
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 1"
				device.icon_name = "video-display"
				card.profile.port = "0"
				device.product.name = "SA222Q"
				iec958.codecs.detected = "[\"PCM\"]"
				audio.channels.detected = "2"
				audio.position.detected = "[FL,FR]"
			Part of profile(s): output:hdmi-stereo
		hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 2"
				device.icon_name = "video-display"
				card.profile.port = "1"
			Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
		hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 3"
				device.icon_name = "video-display"
				card.profile.port = "2"
			Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
		hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 4"
				device.icon_name = "video-display"
				card.profile.port = "3"
			Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3

Card #44
	Name: alsa_card.pci-0000_00_1f.3
	Driver: alsa
	Owner Module: n/a
	Properties:
		device.enum.api = "udev"
		device.api = "alsa"
		media.class = "Audio/Device"
		api.alsa.path = "hw:0"
		api.alsa.card = "0"
		api.alsa.card.name = "HDA Intel PCH"
		api.alsa.card.longname = "HDA Intel PCH at 0x6014120000 irq 157"
		device.plugged.usec = "6495075"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.subsystem = "sound"
		device.vendor.id = "0x8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "0x7a50"
		device.product.name = "700 Series Chipset Family HD Audio"
		device.form_factor = "internal"
		device.name = "alsa_card.pci-0000_00_1f.3"
		device.description = "Built-in Audio"
		device.nick = "HDA Intel PCH"
		device.icon_name = "audio-card-analog-pci"
		api.alsa.use-acp = "true"
		api.acp.auto-profile = "false"
		api.acp.auto-port = "false"
		api.dbus.ReserveDevice1.Priority = "-20"
		api.alsa.split-enable = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		spa.object.id = "2"
		factory.id = "15"
		client.id = "42"
		object.id = "44"
		object.serial = "44"
		object.path = "alsa:acp:PCH"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0x6014120000 irq 157"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "Realtek ALC897"
		alsa.components = "HDA:10ec0897,14629d48,00100500 HDA:80862815,80860101,00100000"
		alsa.id = "PCH"
		device.string = "0"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: no)
		output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: no)
		output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5965, available: no)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
		output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: no)
		output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: no)
		output:hdmi-stereo-extra3+input:analog-stereo: Digital Stereo (HDMI 4) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: no)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 865, available: no)
		output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 865, available: no)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
		output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
		output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
		output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
		output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
		output:hdmi-surround-extra3+input:analog-stereo: Digital Surround 5.1 (HDMI 4) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
		output:hdmi-surround71-extra3+input:analog-stereo: Digital Surround 7.1 (HDMI 4) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
		input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: no)
		pro-audio: Pro Audio (sinks: 5, sources: 2, priority: 1, available: yes)
	Active Profile: off
	Ports:
		analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, availability group: Legacy 1, not available)
			Properties:
				port.type = "mic"
				port.availability-group = "Legacy 1"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "0"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo, output:hdmi-stereo-extra3+input:analog-stereo, output:hdmi-surround-extra3+input:analog-stereo, output:hdmi-surround71-extra3+input:analog-stereo
		analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, availability group: Legacy 2, not available)
			Properties:
				port.type = "mic"
				port.availability-group = "Legacy 2"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "1"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo, output:hdmi-stereo-extra3+input:analog-stereo, output:hdmi-surround-extra3+input:analog-stereo, output:hdmi-surround71-extra3+input:analog-stereo
		analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, availability group: Legacy 3, not available)
			Properties:
				port.type = "line"
				port.availability-group = "Legacy 3"
				card.profile.port = "2"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo, output:hdmi-stereo-extra3+input:analog-stereo, output:hdmi-surround-extra3+input:analog-stereo, output:hdmi-surround71-extra3+input:analog-stereo
		analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, availability group: Legacy 4, not available)
			Properties:
				port.type = "line"
				port.availability-group = "Legacy 4"
				card.profile.port = "3"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
		analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 5, not available)
			Properties:
				port.type = "headphones"
				port.availability-group = "Legacy 5"
				device.icon_name = "audio-headphones"
				card.profile.port = "4"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 6, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 6"
				device.icon_name = "video-display"
				card.profile.port = "5"
			Part of profile(s): output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71, output:hdmi-surround71+input:analog-stereo
		hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 7, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 7"
				device.icon_name = "video-display"
				card.profile.port = "6"
			Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1, output:hdmi-surround71-extra1+input:analog-stereo
		hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 8, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 8"
				device.icon_name = "video-display"
				card.profile.port = "7"
			Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2, output:hdmi-surround71-extra2+input:analog-stereo
		hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 9, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 9"
				device.icon_name = "video-display"
				card.profile.port = "8"
			Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-stereo-extra3+input:analog-stereo, output:hdmi-surround-extra3, output:hdmi-surround-extra3+input:analog-stereo, output:hdmi-surround71-extra3, output:hdmi-surround71-extra3+input:analog-stereo

Card #56
	Name: alsa_card.usb-Plantronics_Poly_Blackwire_3320_Series_DE4D54914E05469E91D9E9F242586422-00
	Driver: alsa
	Owner Module: n/a
	Properties:
		device.enum.api = "udev"
		device.api = "alsa"
		media.class = "Audio/Device"
		api.alsa.path = "hw:2"
		api.alsa.card = "2"
		api.alsa.card.name = "Poly Blackwire 3320 Series"
		api.alsa.card.longname = "Plantronics Poly Blackwire 3320 Series at usb-0000:00:14.0-3, full speed"
		device.plugged.usec = "81707607"
		device.bus_path = "pci-0000:00:14.0-usb-0:3:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/sound/card2"
		device.bus-id = "usb-Plantronics_Poly_Blackwire_3320_Series_DE4D54914E05469E91D9E9F242586422-00"
		device.bus = "usb"
		device.subsystem = "sound"
		device.vendor.id = "0x047f"
		device.vendor.name = "Plantronics, Inc."
		device.product.id = "0x430a"
		device.product.name = "Poly Blackwire 3320 Series"
		device.serial = "Plantronics_Poly_Blackwire_3320_Series_DE4D54914E05469E91D9E9F242586422"
		device.name = "alsa_card.usb-Plantronics_Poly_Blackwire_3320_Series_DE4D54914E05469E91D9E9F242586422-00"
		device.description = "Poly Blackwire 3320 Series"
		device.nick = "Poly Blackwire 3320 Series"
		device.icon_name = "audio-card-analog-usb"
		api.alsa.use-acp = "true"
		api.acp.auto-profile = "false"
		api.acp.auto-port = "false"
		api.dbus.ReserveDevice1.Priority = "-20"
		api.alsa.split-enable = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		spa.object.id = "6"
		factory.id = "15"
		client.id = "42"
		object.id = "56"
		object.serial = "56"
		object.path = "alsa:acp:Series"
		alsa.card = "2"
		alsa.card_name = "Poly Blackwire 3320 Series"
		alsa.long_card_name = "Plantronics Poly Blackwire 3320 Series at usb-0000:00:14.0-3, full speed"
		alsa.driver_name = "snd_usb_audio"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB047f:430a"
		alsa.id = "Series"
		device.string = "2"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		output:analog-stereo+input:mono-fallback: Analog Stereo Output + Mono Input (sinks: 1, sources: 1, priority: 6501, available: yes)
		output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
		output:iec958-stereo+input:mono-fallback: Digital Stereo (IEC958) Output + Mono Input (sinks: 1, sources: 1, priority: 5501, available: yes)
		output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
		output:iec958-ac3-surround-51+input:mono-fallback: Digital Surround 5.1 (IEC958/AC3) Output + Mono Input (sinks: 1, sources: 1, priority: 301, available: yes)
		output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
		pro-audio: Pro Audio (sinks: 1, sources: 1, priority: 1, available: yes)
		input:mono-fallback: Mono Input (sinks: 0, sources: 1, priority: 1, available: yes)
	Active Profile: output:analog-stereo+input:mono-fallback
	Ports:
		analog-input-headset-mic: Headset Microphone (type: Headset, priority: 8800, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "headset"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "0"
			Part of profile(s): input:mono-fallback, output:analog-stereo+input:mono-fallback, output:iec958-stereo+input:mono-fallback, output:iec958-ac3-surround-51+input:mono-fallback
		analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "headphones"
				device.icon_name = "audio-headphones"
				card.profile.port = "1"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:mono-fallback
		iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "spdif"
				card.profile.port = "2"
			Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:mono-fallback
pactl list sinks
Sink #51
	State: SUSPENDED
	Name: alsa_output.pci-0000_01_00.1.hdmi-stereo
	Description: TU116 High Definition Audio Controller Digital Stereo (HDMI) [SA222Q]
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 49119 /  75% / -7.51 dB,   front-right: 49119 /  75% / -7.51 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS 
	Properties:
		object.path = "alsa:acp:NVidia:4:playback"
		api.alsa.path = "hdmi:1"
		api.alsa.pcm.card = "1"
		api.alsa.pcm.stream = "playback"
		port.group = "playback"
		device.icon_name = "audio-card-analog"
		device.bus = "pci"
		audio.channels = "2"
		audio.position = "[ FL, FR ]"
		iec958.codecs = "[\"PCM\"]"
		device.routes = "1"
		alsa.resolution_bits = "16"
		alsa.card = "1"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0x82080000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "Nvidia GPU 99 HDMI/DP"
		alsa.components = "HDA:10de0099,10de1366,00100100"
		alsa.id = "NVidia"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "SA222Q"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "3"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		device.profile.name = "hdmi-stereo"
		device.profile.description = "Digital Stereo (HDMI)"
		card.profile.device = "4"
		device.id = "43"
		factory.name = "api.alsa.pcm.sink"
		node.pause-on-idle = "false"
		priority.driver = "696"
		priority.session = "696"
		media.class = "Audio/Sink"
		node.name = "alsa_output.pci-0000_01_00.1.hdmi-stereo"
		node.nick = "SA222Q"
		device.description = "TU116 High Definition Audio Controller"
		api.alsa.card.name = "HDA NVidia"
		api.alsa.card.longname = "HDA NVidia at 0x82080000 irq 17"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "33"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "51"
		object.serial = "51"
		device.enum.api = "udev"
		api.alsa.card = "1"
		device.plugged.usec = "6465224"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
		device.subsystem = "sound"
		device.vendor.id = "0x10de"
		device.vendor.name = "NVIDIA Corporation"
		device.product.id = "0x1aeb"
		device.product.name = "TU116 High Definition Audio Controller"
		device.name = "alsa_card.pci-0000_01_00.1"
		device.nick = "HDA NVidia"
		api.alsa.use-acp = "true"
		api.acp.auto-profile = "false"
		api.acp.auto-port = "false"
		api.dbus.ReserveDevice1.Priority = "-20"
		api.alsa.split-enable = "true"
		api.dbus.ReserveDevice1 = "Audio1"
		spa.object.id = "4"
		device.string = "1"
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, availability group: Legacy 1, available)
	Active Port: hdmi-output-0
	Formats:
		pcm

Sink #57
	State: SUSPENDED
	Name: alsa_output.usb-Plantronics_Poly_Blackwire_3320_Series_DE4D54914E05469E91D9E9F242586422-00.analog-stereo
	Description: Poly Blackwire 3320 Series Analog Stereo
	Driver: PipeWire
	Sample Specification: s16le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 26183 /  40% / -23.91 dB,   front-right: 26183 /  40% / -23.91 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.usb-Plantronics_Poly_Blackwire_3320_Series_DE4D54914E05469E91D9E9F242586422-00.analog-stereo.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY 
	Properties:
		object.path = "alsa:acp:Series:3:playback"
		api.alsa.path = "front:2"
		api.alsa.pcm.card = "2"
		api.alsa.pcm.stream = "playback"
		port.group = "playback"
		device.icon_name = "audio-card-analog"
		device.bus = "usb"
		audio.channels = "2"
		audio.position = "[ FL, FR ]"
		device.routes = "1"
		alsa.resolution_bits = "16"
		alsa.card = "2"
		alsa.card_name = "Poly Blackwire 3320 Series"
		alsa.long_card_name = "Plantronics Poly Blackwire 3320 Series at usb-0000:00:14.0-3, full speed"
		alsa.driver_name = "snd_usb_audio"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB047f:430a"
		alsa.id = "Series"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		card.profile.device = "3"
		device.id = "56"
		factory.name = "api.alsa.pcm.sink"
		node.pause-on-idle = "false"
		priority.driver = "1109"
		priority.session = "1109"
		media.class = "Audio/Sink"
		node.name = "alsa_output.usb-Plantronics_Poly_Blackwire_3320_Series_DE4D54914E05469E91D9E9F242586422-00.analog-stereo"
		node.nick = "Poly Blackwire 3320 Series"
		device.description = "Poly Blackwire 3320 Series"
		api.alsa.card.name = "Poly Blackwire 3320 Series"
		api.alsa.card.longname = "Plantronics Poly Blackwire 3320 Series at usb-0000:00:14.0-3, full speed"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "33"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "57"
		object.serial = "57"
		device.enum.api = "udev"
		api.alsa.card = "2"
		device.plugged.usec = "81707607"
		device.bus_path = "pci-0000:00:14.0-usb-0:3:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/sound/card2"
		device.bus-id = "usb-Plantronics_Poly_Blackwire_3320_Series_DE4D54914E05469E91D9E9F242586422-00"
		device.subsystem = "sound"
		device.vendor.id = "0x047f"
		device.vendor.name = "Plantronics, Inc."
		device.product.id = "0x430a"
		device.product.name = "Poly Blackwire 3320 Series"
		device.serial = "Plantronics_Poly_Blackwire_3320_Series_DE4D54914E05469E91D9E9F242586422"
		device.name = "alsa_card.usb-Plantronics_Poly_Blackwire_3320_Series_DE4D54914E05469E91D9E9F242586422-00"
		device.nick = "Poly Blackwire 3320 Series"
		api.alsa.use-acp = "true"
		api.acp.auto-profile = "false"
		api.acp.auto-port = "false"
		api.dbus.ReserveDevice1.Priority = "-20"
		api.alsa.split-enable = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		spa.object.id = "6"
		device.string = "2"
	Ports:
		analog-output-headphones: Headphones (type: Headphones, priority: 9900, availability unknown)
	Active Port: analog-output-headphones
	Formats:
		pcm

Offline

#4 Yesterday 13:13:45

IpMaan
Member
Registered: 2026-10-07
Posts: 3

Re: Low to no sound from one side of wired headphones (intermittenetly)

rebooted the system keeping the headphones in the same usb port and not rotating the type-c (nothing touched at hardware), but now the there is sound from both sides.

sudo journalctl -f
Oct 08 18:37:10 arch-pc systemd[684]: Started PipeWire PulseAudio.
Oct 08 18:37:10 arch-pc pipewire-pulse[1618]: mod.rt: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
Oct 08 18:37:10 arch-pc pipewire-pulse[1618]: mod.rt: RTKit does not give us MaxRealtimePriority, using 1
Oct 08 18:37:10 arch-pc pipewire-pulse[1618]: mod.rt: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
Oct 08 18:37:10 arch-pc pipewire-pulse[1618]: mod.rt: RTKit does not give us MinNiceLevel, using 0
Oct 08 18:37:10 arch-pc pipewire-pulse[1618]: mod.rt: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
Oct 08 18:37:10 arch-pc pipewire-pulse[1618]: mod.rt: RTKit does not give us RTTimeUSecMax, using -1
Oct 08 18:37:25 arch-pc systemd[1]: systemd-timedated.service: Deactivated successfully.
Oct 08 18:38:41 arch-pc sudo[1908]: abhay : TTY=pts/0 ; PWD=/home/abhay ; USER=root ; COMMAND=/usr/bin/journalctl -f
Oct 08 18:38:41 arch-pc sudo[1908]: pam_unix(sudo:session): session opened for user root(uid=0) by abhay(uid=1000)
pactl list cards
Card #43
Name: alsa_card.pci-0000_01_00.1
Driver: alsa
Owner Module: n/a
Properties:
device.enum.api = "udev"
device.api = "alsa"
media.class = "Audio/Device"
api.alsa.path = "hw:2"
api.alsa.card = "2"
api.alsa.card.name = "HDA NVidia"
api.alsa.card.longname = "HDA NVidia at 0x82080000 irq 17"
device.plugged.usec = "6490006"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2"
device.bus = "pci"
device.subsystem = "sound"
device.vendor.id = "0x10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0x1aeb"
device.product.name = "TU116 High Definition Audio Controller"
device.name = "alsa_card.pci-0000_01_00.1"
device.description = "TU116 High Definition Audio Controller"
device.nick = "HDA NVidia"
device.icon_name = "audio-card-analog-pci"
api.alsa.use-acp = "true"
api.acp.auto-profile = "false"
api.acp.auto-port = "false"
api.dbus.ReserveDevice1.Priority = "-20"
api.alsa.split-enable = "true"
api.dbus.ReserveDevice1 = "Audio2"
spa.object.id = "6"
factory.id = "15"
client.id = "42"
object.id = "43"
object.serial = "43"
object.path = "alsa:acp:NVidia"
alsa.card = "2"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0x82080000 irq 17"
alsa.driver_name = "snd_hda_intel"
alsa.mixer_name = "Nvidia GPU 99 HDMI/DP"
alsa.components = "HDA:10de0099,10de1366,00100100"
alsa.id = "NVidia"
device.string = "2"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: yes)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
pro-audio: Pro Audio (sinks: 4, sources: 0, priority: 1, available: yes)
Active Profile: output:hdmi-stereo
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 1"
device.icon_name = "video-display"
card.profile.port = "0"
device.product.name = "SA222Q"
iec958.codecs.detected = "[\"PCM\"]"
audio.channels.detected = "2"
audio.position.detected = "[FL,FR]"
Part of profile(s): output:hdmi-stereo
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 2"
device.icon_name = "video-display"
card.profile.port = "1"
Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 3"
device.icon_name = "video-display"
card.profile.port = "2"
Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 4"
device.icon_name = "video-display"
card.profile.port = "3"
Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3

Card #44
Name: alsa_card.usb-Plantronics_Poly_Blackwire_3320_Series_DE4D54914E05469E91D9E9F242586422-00
Driver: alsa
Owner Module: n/a
Properties:
device.enum.api = "udev"
device.api = "alsa"
media.class = "Audio/Device"
api.alsa.path = "hw:0"
api.alsa.card = "0"
api.alsa.card.name = "Poly Blackwire 3320 Series"
api.alsa.card.longname = "Plantronics Poly Blackwire 3320 Series at usb-0000:00:14.0-3, full speed"
device.plugged.usec = "7874254"
device.bus_path = "pci-0000:00:14.0-usb-0:3:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/sound/card0"
device.bus-id = "usb-Plantronics_Poly_Blackwire_3320_Series_DE4D54914E05469E91D9E9F242586422-00"
device.bus = "usb"
device.subsystem = "sound"
device.vendor.id = "0x047f"
device.vendor.name = "Plantronics, Inc."
device.product.id = "0x430a"
device.product.name = "Poly Blackwire 3320 Series"
device.serial = "Plantronics_Poly_Blackwire_3320_Series_DE4D54914E05469E91D9E9F242586422"
device.name = "alsa_card.usb-Plantronics_Poly_Blackwire_3320_Series_DE4D54914E05469E91D9E9F242586422-00"
device.description = "Poly Blackwire 3320 Series"
device.nick = "Poly Blackwire 3320 Series"
device.icon_name = "audio-card-analog-usb"
api.alsa.use-acp = "true"
api.acp.auto-profile = "false"
api.acp.auto-port = "false"
api.dbus.ReserveDevice1.Priority = "-20"
api.alsa.split-enable = "true"
api.dbus.ReserveDevice1 = "Audio0"
spa.object.id = "2"
factory.id = "15"
client.id = "42"
object.id = "44"
object.serial = "44"
object.path = "alsa:acp:Series"
alsa.card = "0"
alsa.card_name = "Poly Blackwire 3320 Series"
alsa.long_card_name = "Plantronics Poly Blackwire 3320 Series at usb-0000:00:14.0-3, full speed"
alsa.driver_name = "snd_usb_audio"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB047f:430a"
alsa.id = "Series"
device.string = "0"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:analog-stereo+input:mono-fallback: Analog Stereo Output + Mono Input (sinks: 1, sources: 1, priority: 6501, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
output:iec958-stereo+input:mono-fallback: Digital Stereo (IEC958) Output + Mono Input (sinks: 1, sources: 1, priority: 5501, available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
output:iec958-ac3-surround-51+input:mono-fallback: Digital Surround 5.1 (IEC958/AC3) Output + Mono Input (sinks: 1, sources: 1, priority: 301, available: yes)
output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
pro-audio: Pro Audio (sinks: 1, sources: 1, priority: 1, available: yes)
input:mono-fallback: Mono Input (sinks: 0, sources: 1, priority: 1, available: yes)
Active Profile: output:analog-stereo+input:mono-fallback
Ports:
analog-input-headset-mic: Headset Microphone (type: Headset, priority: 8800, latency offset: 0 usec, availability unknown)
Properties:
port.type = "headset"
device.icon_name = "audio-input-microphone"
card.profile.port = "0"
Part of profile(s): input:mono-fallback, output:analog-stereo+input:mono-fallback, output:iec958-stereo+input:mono-fallback, output:iec958-ac3-surround-51+input:mono-fallback
analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability unknown)
Properties:
port.type = "headphones"
device.icon_name = "audio-headphones"
card.profile.port = "1"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:mono-fallback
iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
Properties:
port.type = "spdif"
card.profile.port = "2"
Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:mono-fallback

Card #45
Name: alsa_card.pci-0000_00_1f.3
Driver: alsa
Owner Module: n/a
Properties:
device.enum.api = "udev"
device.api = "alsa"
media.class = "Audio/Device"
api.alsa.path = "hw:1"
api.alsa.card = "1"
api.alsa.card.name = "HDA Intel PCH"
api.alsa.card.longname = "HDA Intel PCH at 0x6014120000 irq 157"
device.plugged.usec = "6526233"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card1"
device.bus = "pci"
device.subsystem = "sound"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0x7a50"
device.product.name = "700 Series Chipset Family HD Audio"
device.form_factor = "internal"
device.name = "alsa_card.pci-0000_00_1f.3"
device.description = "Built-in Audio"
device.nick = "HDA Intel PCH"
device.icon_name = "audio-card-analog-pci"
api.alsa.use-acp = "true"
api.acp.auto-profile = "false"
api.acp.auto-port = "false"
api.dbus.ReserveDevice1.Priority = "-20"
api.alsa.split-enable = "true"
api.dbus.ReserveDevice1 = "Audio1"
spa.object.id = "4"
factory.id = "15"
client.id = "42"
object.id = "45"
object.serial = "45"
object.path = "alsa:acp:PCH"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0x6014120000 irq 157"
alsa.driver_name = "snd_hda_intel"
alsa.mixer_name = "Realtek ALC897"
alsa.components = "HDA:10ec0897,14629d48,00100500 HDA:80862815,80860101,00100000"
alsa.id = "PCH"
device.string = "1"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: no)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: no)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5965, available: no)
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: no)
output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: no)
output:hdmi-stereo-extra3+input:analog-stereo: Digital Stereo (HDMI 4) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 865, available: no)
output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 865, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
output:hdmi-surround-extra3+input:analog-stereo: Digital Surround 5.1 (HDMI 4) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
output:hdmi-surround71-extra3+input:analog-stereo: Digital Surround 7.1 (HDMI 4) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: no)
pro-audio: Pro Audio (sinks: 5, sources: 2, priority: 1, available: yes)
Active Profile: off
Ports:
analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, availability group: Legacy 1, not available)
Properties:
port.type = "mic"
port.availability-group = "Legacy 1"
device.icon_name = "audio-input-microphone"
card.profile.port = "0"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo, output:hdmi-stereo-extra3+input:analog-stereo, output:hdmi-surround-extra3+input:analog-stereo, output:hdmi-surround71-extra3+input:analog-stereo
analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, availability group: Legacy 2, not available)
Properties:
port.type = "mic"
port.availability-group = "Legacy 2"
device.icon_name = "audio-input-microphone"
card.profile.port = "1"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo, output:hdmi-stereo-extra3+input:analog-stereo, output:hdmi-surround-extra3+input:analog-stereo, output:hdmi-surround71-extra3+input:analog-stereo
analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, availability group: Legacy 3, not available)
Properties:
port.type = "line"
port.availability-group = "Legacy 3"
card.profile.port = "2"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo, output:hdmi-stereo-extra3+input:analog-stereo, output:hdmi-surround-extra3+input:analog-stereo, output:hdmi-surround71-extra3+input:analog-stereo
analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, availability group: Legacy 4, not available)
Properties:
port.type = "line"
port.availability-group = "Legacy 4"
card.profile.port = "3"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 5, not available)
Properties:
port.type = "headphones"
port.availability-group = "Legacy 5"
device.icon_name = "audio-headphones"
card.profile.port = "4"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 6, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 6"
device.icon_name = "video-display"
card.profile.port = "5"
Part of profile(s): output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71, output:hdmi-surround71+input:analog-stereo
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 7, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 7"
device.icon_name = "video-display"
card.profile.port = "6"
Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1, output:hdmi-surround71-extra1+input:analog-stereo
hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 8, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 8"
device.icon_name = "video-display"
card.profile.port = "7"
Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2, output:hdmi-surround71-extra2+input:analog-stereo
hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 9, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 9"
device.icon_name = "video-display"
card.profile.port = "8"
Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-stereo-extra3+input:analog-stereo, output:hdmi-surround-extra3, output:hdmi-surround-extra3+input:analog-stereo, output:hdmi-surround71-extra3, output:hdmi-surround71-extra3+input:analog-stereo
pactl list sinks
Sink #52
State: SUSPENDED
Name: alsa_output.pci-0000_01_00.1.hdmi-stereo
Description: TU116 High Definition Audio Controller Digital Stereo (HDMI) [SA222Q]
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 49119 / 75% / -7.51 dB, front-right: 49119 / 75% / -7.51 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
object.path = "alsa:acp:NVidia:4:playback"
api.alsa.path = "hdmi:2"
api.alsa.pcm.card = "2"
api.alsa.pcm.stream = "playback"
port.group = "playback"
device.icon_name = "audio-card-analog"
device.bus = "pci"
audio.channels = "2"
audio.position = "[ FL, FR ]"
iec958.codecs = "[\"PCM\"]"
device.routes = "1"
alsa.resolution_bits = "16"
alsa.card = "2"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0x82080000 irq 17"
alsa.driver_name = "snd_hda_intel"
alsa.mixer_name = "Nvidia GPU 99 HDMI/DP"
alsa.components = "HDA:10de0099,10de1366,00100100"
alsa.id = "NVidia"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "SA222Q"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "3"
alsa.sync.id = "00000000:00000000:00000000:00000000"
device.profile.name = "hdmi-stereo"
device.profile.description = "Digital Stereo (HDMI)"
card.profile.device = "4"
device.id = "43"
factory.name = "api.alsa.pcm.sink"
node.pause-on-idle = "false"
priority.driver = "696"
priority.session = "696"
media.class = "Audio/Sink"
node.name = "alsa_output.pci-0000_01_00.1.hdmi-stereo"
node.nick = "SA222Q"
device.description = "TU116 High Definition Audio Controller"
api.alsa.card.name = "HDA NVidia"
api.alsa.card.longname = "HDA NVidia at 0x82080000 irq 17"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "33"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "52"
object.serial = "52"
device.enum.api = "udev"
api.alsa.card = "2"
device.plugged.usec = "6490006"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2"
device.subsystem = "sound"
device.vendor.id = "0x10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0x1aeb"
device.product.name = "TU116 High Definition Audio Controller"
device.name = "alsa_card.pci-0000_01_00.1"
device.nick = "HDA NVidia"
api.alsa.use-acp = "true"
api.acp.auto-profile = "false"
api.acp.auto-port = "false"
api.dbus.ReserveDevice1.Priority = "-20"
api.alsa.split-enable = "true"
api.dbus.ReserveDevice1 = "Audio2"
spa.object.id = "6"
device.string = "2"
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, availability group: Legacy 1, available)
Active Port: hdmi-output-0
Formats:
pcm

Sink #53
State: SUSPENDED
Name: alsa_output.usb-Plantronics_Poly_Blackwire_3320_Series_DE4D54914E05469E91D9E9F242586422-00.analog-stereo
Description: Poly Blackwire 3320 Series Analog Stereo
Driver: PipeWire
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 26183 / 40% / -23.91 dB, front-right: 26183 / 40% / -23.91 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.usb-Plantronics_Poly_Blackwire_3320_Series_DE4D54914E05469E91D9E9F242586422-00.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY
Properties:
object.path = "alsa:acp:Series:3:playback"
api.alsa.path = "front:0"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
port.group = "playback"
device.icon_name = "audio-card-analog"
device.bus = "usb"
audio.channels = "2"
audio.position = "[ FL, FR ]"
device.routes = "1"
alsa.resolution_bits = "16"
alsa.card = "0"
alsa.card_name = "Poly Blackwire 3320 Series"
alsa.long_card_name = "Plantronics Poly Blackwire 3320 Series at usb-0000:00:14.0-3, full speed"
alsa.driver_name = "snd_usb_audio"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB047f:430a"
alsa.id = "Series"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
card.profile.device = "3"
device.id = "44"
factory.name = "api.alsa.pcm.sink"
node.pause-on-idle = "false"
priority.driver = "1109"
priority.session = "1109"
media.class = "Audio/Sink"
node.name = "alsa_output.usb-Plantronics_Poly_Blackwire_3320_Series_DE4D54914E05469E91D9E9F242586422-00.analog-stereo"
node.nick = "Poly Blackwire 3320 Series"
device.description = "Poly Blackwire 3320 Series"
api.alsa.card.name = "Poly Blackwire 3320 Series"
api.alsa.card.longname = "Plantronics Poly Blackwire 3320 Series at usb-0000:00:14.0-3, full speed"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "33"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "53"
object.serial = "53"
device.enum.api = "udev"
api.alsa.card = "0"
device.plugged.usec = "7874254"
device.bus_path = "pci-0000:00:14.0-usb-0:3:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/sound/card0"
device.bus-id = "usb-Plantronics_Poly_Blackwire_3320_Series_DE4D54914E05469E91D9E9F242586422-00"
device.subsystem = "sound"
device.vendor.id = "0x047f"
device.vendor.name = "Plantronics, Inc."
device.product.id = "0x430a"
device.product.name = "Poly Blackwire 3320 Series"
device.serial = "Plantronics_Poly_Blackwire_3320_Series_DE4D54914E05469E91D9E9F242586422"
device.name = "alsa_card.usb-Plantronics_Poly_Blackwire_3320_Series_DE4D54914E05469E91D9E9F242586422-00"
device.nick = "Poly Blackwire 3320 Series"
api.alsa.use-acp = "true"
api.acp.auto-profile = "false"
api.acp.auto-port = "false"
api.dbus.ReserveDevice1.Priority = "-20"
api.alsa.split-enable = "true"
api.dbus.ReserveDevice1 = "Audio0"
spa.object.id = "2"
device.string = "0"
Ports:
analog-output-headphones: Headphones (type: Headphones, priority: 9900, availability unknown)
Active Port: analog-output-headphones
Formats:
pcm

Offline

Pages: 1

Board footer

Powered by FluxBB