You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 Yesterday 04:43:21
- Josh89
- Member
- Registered: Yesterday
- Posts: 1
Microphone not showing
Hi,
I am needing some assistance with getting a microphone working.
pactl list sources
Source #81
State: SUSPENDED
Name: alsa_output.pci-0000_04_00.1.hdmi-stereo-extra1.monitor
Description: Monitor of Navi 48 HDMI/DP Audio Controller Digital Stereo (HDMI 2) [LS27D80xU]
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_04_00.1.hdmi-stereo-extra1
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
object.path = "alsa:acp:HDMI:7:playback"
api.alsa.path = "hdmi:0,1"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
port.group = "playback"
device.icon_name = "audio-card-analog"
device.bus = "pci"
audio.channels = "2"
audio.position = "[ FL, FR ]"
iec958.codecs = "[\"PCM\"]"
device.routes = "1"
alsa.resolution_bits = "16"
alsa.card = "0"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0x8d0a0000 irq 208"
alsa.driver_name = "snd_hda_intel"
alsa.mixer_name = "ATI R6xx HDMI"
alsa.components = "HDA:1002aa01,00aa0100,00100a00"
alsa.id = "HDMI"
device.api = "alsa"
device.class = "monitor"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "LS27D80xU"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "7"
alsa.sync.id = "00000000:00000000:00000000:00000000"
device.profile.name = "hdmi-stereo-extra1"
device.profile.description = "Digital Stereo (HDMI 2)"
card.profile.device = "7"
device.id = "43"
factory.name = "api.alsa.pcm.sink"
node.pause-on-idle = "false"
priority.driver = "632"
priority.session = "632"
media.class = "Audio/Sink"
node.name = "alsa_output.pci-0000_04_00.1.hdmi-stereo-extra1"
node.nick = "LS27D80xU"
device.description = "Navi 48 HDMI/DP Audio Controller"
api.alsa.card.name = "HDA ATI HDMI"
api.alsa.card.longname = "HDA ATI HDMI at 0x8d0a0000 irq 208"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "33"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "71"
object.serial = "81"
device.enum.api = "udev"
api.alsa.card = "0"
device.plugged.usec = "20421924"
device.bus_path = "pci-0000:04:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:06.0/0000:02:00.0/0000:03:00.0/0000:04:00.1/sound/card0"
device.subsystem = "sound"
device.vendor.id = "0x1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "0xab40"
device.product.name = "Navi 48 HDMI/DP Audio Controller"
device.name = "alsa_card.pci-0000_04_00.1"
device.nick = "HDA ATI HDMI"
api.alsa.use-acp = "true"
api.acp.auto-profile = "false"
api.acp.auto-port = "false"
api.dbus.ReserveDevice1.Priority = "-20"
api.alsa.split-enable = "true"
api.dbus.ReserveDevice1 = "Audio0"
spa.object.id = "2"
device.string = "0"
Ports:
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, availability group: Legacy 2, available)
Active Port: hdmi-output-1
Formats:
pcm
Source #117
State: RUNNING
Name: alsa_output.usb-ESS_Technology_AUDIO_DONGLE-00.analog-stereo.monitor
Description: Monitor of AUDIO DONGLE Analog Stereo
Driver: PipeWire
Sample Specification: s24le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.usb-ESS_Technology_AUDIO_DONGLE-00.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
object.path = "alsa:acp:DONGLE:1:playback"
api.alsa.path = "front:1"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
port.group = "playback"
device.icon_name = "audio-card-analog"
device.bus = "usb"
audio.channels = "2"
audio.position = "[ FL, FR ]"
device.routes = "1"
alsa.resolution_bits = "16"
alsa.card = "1"
alsa.card_name = "AUDIO DONGLE"
alsa.long_card_name = "ESS Technology AUDIO DONGLE at usb-0000:80:14.0-12.4, full speed"
alsa.driver_name = "snd_usb_audio"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB0b05:1bb7"
alsa.id = "DONGLE"
device.api = "alsa"
device.class = "monitor"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
card.profile.device = "1"
device.id = "77"
factory.name = "api.alsa.pcm.sink"
node.pause-on-idle = "false"
priority.driver = "1109"
priority.session = "1109"
media.class = "Audio/Sink"
node.name = "alsa_output.usb-ESS_Technology_AUDIO_DONGLE-00.analog-stereo"
node.nick = "AUDIO DONGLE"
device.description = "AUDIO DONGLE"
api.alsa.card.name = "AUDIO DONGLE"
api.alsa.card.longname = "ESS Technology AUDIO DONGLE at usb-0000:80:14.0-12.4, full speed"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "33"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "60"
object.serial = "117"
node.max-latency = "16384/48000"
api.alsa.period-size = "256"
api.alsa.period-num = "128"
api.alsa.headroom = "256"
device.enum.api = "udev"
api.alsa.card = "1"
device.plugged.usec = "337802584"
device.bus_path = "pci-0000:80:14.0-usb-0:12.4:1.0"
sysfs.path = "/devices/pci0000:80/0000:80:14.0/usb3/3-12/3-12.4/3-12.4:1.0/sound/card1"
device.bus-id = "usb-ESS_Technology_AUDIO_DONGLE-00"
device.subsystem = "sound"
device.vendor.id = "0x0b05"
device.vendor.name = "ASUSTek Computer, Inc."
device.product.id = "0x1bb7"
device.product.name = "AUDIO DONGLE"
device.serial = "ESS_Technology_AUDIO_DONGLE"
device.name = "alsa_card.usb-ESS_Technology_AUDIO_DONGLE-00"
device.nick = "AUDIO DONGLE"
api.alsa.use-acp = "true"
api.acp.auto-profile = "false"
api.acp.auto-port = "false"
api.dbus.ReserveDevice1.Priority = "-20"
api.alsa.split-enable = "true"
api.dbus.ReserveDevice1 = "Audio1"
spa.object.id = "4"
device.string = "1"cat /proc/asound/cards
0 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0x8d0a0000 irq 208
1 [DONGLE ]: USB-Audio - AUDIO DONGLE
ESS Technology AUDIO DONGLE at usb-0000:80:14.0-12.4, full speedarecord -l
arecord -l
**** List of CAPTURE Hardware Devices ****I am using Sony WH-1000XM5 device through 3.5mm jack dongle. Audio output works fine.
Kind regards,
Josh
Offline
#2 Yesterday 07:22:32
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,307
Re: Microphone not showing
The Sony WH-1000XM5 doesn't seem to have a mic - google doesn't know the 0b05:1bb7 device.
Does it have multiple phone jacks?
What's the tail of "dmesg -W" when you plug it?
Offline
#3 Yesterday 08:13:47
- mithrial
- Member
- Registered: 2017-03-05
- Posts: 173
Re: Microphone not showing
I have the WH-1000XM5 and it's a bluetooth headset. I can confirm because I'm currently in an online meeting with that setup. However, via bluetooth and not a third-party plug.
My guess is that if it's one 3.5 plug, it only is the output and not the input. But your device shows it as a USB device. Could you clarify the exact setup?
Also, if I run arecord -l:
**** List of CAPTURE Hardware Devices ****
card 1: Generic_1 [HD-Audio Generic], device 0: ALC245 Analog [ALC245 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0The headset is not shown here, either so I wouldn't rely too much on alsa. (?)
Last edited by mithrial (Yesterday 08:14:33)
Offline
Pages: 1