[UPDATED]Cant Get Freedom In Internet (VPNs are not working)

jojo06 · 2026-10-13 19:04:04

Yes, that one. From extra package of Arch.
sudo pacman -Qs discord

local/discord 1:1.0.161-1
    All-in-one voice and text chat for gamers

I don't know my account is not new. New account can make difference ?

seth · 2026-10-13 19:32:28

A new account on your computer - ie. whether it's something in the local discord config.
*Not* "a new discord account"

jojo06 · 2026-10-17 08:40:01

No its same o same, one and only account of mine.

seth · 2026-10-17 08:51:31

Wut?
You're supposed to create a new user, https://wiki.archlinux.org/title/Users_ … management and test the discord behavior w/ that to rule out a problem w/ your local ~/.{config,cache}

jojo06 · 2026-10-19 19:12:38

You mean this ?:

# mkdir /etc/skel/.config
# cp ~archie/.config/sxhkd /etc/skel/.config

Ok I will try when I arrive home. By the way what is the logic of new user may not face with same problem ?

seth · 2026-10-19 19:16:39

No, I mean https://wiki.archlinux.org/title/Users_ … management
Create a new user, log in as that and try to run discord as that user.

jojo06 · 2026-10-20 23:16:48

I tried with `warp-cli` and config vpn and without VPN in new user. Its downloaded and installed first (even i open from the search bar and it was not using kde like main user) then tried a few times. Still failing.

seth · 2026-10-21 14:34:10

I seriously don't know what you're trying to say but from what I understood is that the main problem is that the discord application does not work with or without VPN while the discord web service does work with or without VPN.
So the idea would be to run the discord application from a fresh user account and you do not have to install anything for that.
If you do, you're likely using some flatpak and not https://archlinux.org/packages/extra/x86_64/discord/

In doubt please write the reply in your native tongue and use https://deepl.com/translator to get the English version.

jojo06 · 2026-10-21 18:57:06

Here's what happened: I logged in with a new user account. I tried using `warp-cli`, and then I tried using a VPN configuration. Discord didn't work with either of them. Then I tried without a VPN, and it still didn't work.

After pressing the Windows key, I searched for `discord` and ran it. Discord’s small “loading” and “updating” box appeared, and the messages “Downloading” and “Installing” showed up there. It wasn’t KDE. The GNOME desktop environment was selected.

seth · 2026-10-21 20:00:40

Ah, ja… https://archlinux.org/packages/extra/x86_64/discord/ is just the installer now.
So if it's not your ~/.config and only the discord app - what errors do you actually get (w/o the VPN)?

jojo06 · 2026-10-22 19:15:53

Firefox:

Be careful. Something doesn’t look right.
Firefox spotted a potentially serious security issue with discord.com. Someone pretending to be the site could try to steal things like credit card info, passwords, or emails.
discord.com has a security policy called HTTP Strict Transport Security (HSTS), which means that Firefox can only connect to it securely. You can’t add an exception to visit this site.

Advanced:

Advanced
What makes the site look dangerous?
Because there’s an issue with the site’s certificate. Sites use certificates issued by a certificate authority to prove they’re really who they say they are. This site’s certificate is self-signed. It wasn’t issued by a recognized certificate authority – so we don’t trust it by default.
What can you do about it?
Not much. It’s likely there’s a problem with the site itself.
IMPORTANT NOTE: If you are trying to visit this site on a corporate intranet, your IT staff may use self-signed certificates. They can help you check their authenticity.
View the site’s certificate
Error Code: MOZILLA_PKIX_ERROR_SELF_SIGNED_CERT
Oct 22, 2026 10:06:40 PM GMT+3

Strange... There used to be a “I understand the risk, continue” button, but now that's gone too.

Even if it were there (as far as I recall, or based on what I remember from other blocked sites), this time it either says the site can’t be reached or, more often than not, states, “Access to this site has been blocked pursuant to a decision by the BTK under Article X of the law.”

There are no issues accessing the site via VPN in the browser. In the app, however, whether using a VPN or not, it gets stuck on a message that says “Checking for updates” and displays the message “Failed, retrying” after x seconds; then the duration of these seconds increases.

`warp-cli` didn't work in the browser this time. I refreshed the page where the mentioned Firefox error occurred, but it got stuck on the “Loading...” message. That warning usually pops up anyway if it can't connect. It's the same on other blocked sites as well.

seth · 2026-10-22 19:31:55

ping -c1 discord.com
openssl s_client discord.com:443

There used to be a “I understand the risk, continue” button, but now that's gone too.

Firefox wrote:

discord.com has a security policy called HTTP Strict Transport Security (HSTS), which means that Firefox can only connect to it securely

“Checking for updates” and displays the message “Failed, retrying” after x seconds

https://www.reddit.com/r/discordapp/com … r_updates/

“Access to this site has been blocked pursuant to a decision by the BTK

For clarification, are you in the US or Erdoğanistan?

jojo06 · 2026-10-24 19:37:20

Without VPN:

PING discord.com (195.175.254.2) 56(84) bytes of data.
64 bytes from 195.175.254.2.static.turktelekom.com.tr (195.175.254.2): icmp_seq=1 ttl=246 time=15.0 ms

--- discord.com ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 14.992/14.992/14.992/0.000 ms

With `warp-cli connect`:

PING discord.com (195.175.254.2) 56(84) bytes of data.
64 bytes from 195.175.254.2.static.turktelekom.com.tr (195.175.254.2): icmp_seq=1 ttl=246 time=15.0 ms

--- discord.com ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 15.044/15.044/15.044/0.000 ms

Its not temporary server problem, its always like this. If its not going to connect its getting stuck in `Checking Updates`.
It was like this even when it worked with a VPN; if the VPN wasn't connected, it would get stuck here.

Unfortunately, I'm in Erdoganistan. BTK; Information Technologies Board

seth · 2026-10-25 07:25:05

It's the DNS, switch to 1.1.1.1 or 8.8.8.8 or 9.9.9.9

jojo06 · 2026-10-28 03:11:25

Will do. From VPN config or browser or local ?

seth · 2026-10-28 07:07:30

Either.
https://wiki.archlinux.org/title/Domain_name_resolution

From the looks of the ping result your friendly local dictator has your ISP block discord through the ISPs DNS server that resolves discord.com to a host at your ISP.
Your browser works because of https://wiki.archlinux.org/title/Domain … -level_DNS (which is also why this kind of censorship is completely ineffective - at least that's what nerds tend to think…)

There's a chance that this isn't a complete clown-show and your ISP intercepts traffic on #53 in which case you'll need sth. like https://wiki.archlinux.org/title/System … S_over_TLS - see the security and privacy section in the DNS article.

jojo06 · Yesterday 07:12:59

I haven't tried DNS over TLS yet. Because even changing the DNS settings didn't let me access a blocked site in the browser. They're enforcing the Discord ban much more strictly. Browser error:

Secure Connection Failed

The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
What can you do about it?

The issue is most likely with the website, and there is nothing you can do to resolve it. You can notify the website’s administrator about the problem.

Error Code: PR_CONNECT_RESET_ERROR

Commands I ran:

nmcli con mod "UUID" ipv4.dns "1.1.1.1 1.0.0.1" ipv4.ignore-auto-dns yes && nmcli con up "UUID"

Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/4)

mcli con mod "UUID" ipv4.dns "8.8.8.8" ipv4.ignore-auto-dns yes && nmcli con up "UUID"

Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/5)

nmcli con mod "UUID" ipv4.dns "9.9.9.9" ipv4.ignore-auto-dns yes && nmcli con up "UUID"

Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/6)

seth · Yesterday 07:54:51

You previously claimed discord would work in the browser?
Was that a lie or did the behavior change - and in response to what?
Do you get that error w/ or w/o a VPN or either?

If you issued those commands literally they're not doing anything - UUID is a placeholder for sure and I also don't know whether con mod allows you to change multiple settings in one line and bringing the connection up might be inert if it already is.
See https://wiki.archlinux.org/title/NetworkManager and stop copypasting LLM suggestions into terminals.

-thc · Yesterday 08:30:26

@jojo06: If your ISP enforces a censorship comparable to the "great wall of china" it is extremely important to us to know in what exact state your system is - in every test scenario.

Baseline - test the following scenario: No VPN is active. The file "/etc/resolv.conf" must be created by NetworkManager and must contain the IP address of your router. Open Firefox without any "Firefox VPN" or add-ons. Go to "Settings > Privacy and Security > DNS over HTTPS > Advanced Settings" and activate "Custom > Cloudflare (Default)"

Does discord work inside the browser session?

seth · Yesterday 08:37:54

jojo06 wrote:

Lone_Wolf wrote:
Have you tried accessing discord from a browser while the vpn was active ?
Yeah it was working.

But

jojo06 wrote:

Unfortunately, I'm in Erdoganistan. BTK; Information Technologies Board

and apparently it's not *just* the DNS.

All of that information might have been a good thread opener.

@jojo06 does your VPN (which specifically) work in general?
What's the reported WAN IP according to eg. https://wanip.org ?

-thc · Today 06:47:32

seth wrote:

and apparently it's not *just* the DNS.

Wow - didn't know that. O.K. - that should make my test fail.

seth wrote:

All of that information might have been a good thread opener.

Yep.

Arch Linux

#26 2026-10-13 19:04:04

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

#27 2026-10-13 19:32:28

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

#28 2026-10-17 08:40:01

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

#29 2026-10-17 08:51:31

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

#30 2026-10-19 19:12:38

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

#31 2026-10-19 19:16:39

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

#32 2026-10-20 23:16:48

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

#33 2026-10-21 14:34:10

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

#34 2026-10-21 18:57:06

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

#35 2026-10-21 20:00:40

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

#36 2026-10-22 19:15:53

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

#37 2026-10-22 19:31:55

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

#38 2026-10-24 19:37:20

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

#39 2026-10-25 07:25:05

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

#40 2026-10-28 03:11:25

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

#41 2026-10-28 07:07:30

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

#42 Yesterday 07:12:59

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

#43 Yesterday 07:54:51

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

#44 Yesterday 08:30:26

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

#45 Yesterday 08:37:54

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

#46 Today 06:47:32

Re: [UPDATED]Cant Get Freedom In Internet (VPNs are not working)

Board footer