You are not logged in.

#1 2004-08-08 17:15:57

lilsirecho
Veteran
Registered: 2003-10-24
Posts: 5,000

USB 2.0 drive shuts down highmem

When booting with the USB 2.0 drive connected and energized (external powered) the highmem 4G capability is not enabled (examined in dmesg).

Without the USB connected, the highmem is present in dmesg.

Any help is appreciated. big_smile


Sign of the times: Navajo blanket..made in China
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit!     X-ray confirms Iam spineless!

Offline

#2 2004-08-08 19:50:19

Fox
Member
Registered: 2004-07-28
Posts: 124

Re: USB 2.0 drive shuts down highmem

Post the dmesg output maybe that can be insightful.

Fox

Offline

#3 2004-08-09 08:08:08

lilsirecho
Veteran
Registered: 2003-10-24
Posts: 5,000

Re: USB 2.0 drive shuts down highmem

Thanks Fox;

After considering the events leading to this catastrophe, which included a recent download via pacman of several pkgs, I include the two dmesg printouts below.

The first one is dmesg with USB external HDD enabled;
------------------------------------------------------------------------------------
file:/root/Desktop/dmesg with USB enabled[root@n6re ~]# dmesg
01 level low
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00178002
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0002
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00  1    0    0   0   0    0    0    00
01 001 01  0    0    0   0   0    1    1    39
02 001 01  0    0    0   0   0    1    1    31
03 001 01  0    0    0   0   0    1    1    41
04 001 01  0    0    0   0   0    1    1    49
05 001 01  0    0    0   0   0    1    1    51
06 001 01  0    0    0   0   0    1    1    59
07 001 01  0    0    0   0   0    1    1    61
08 001 01  0    0    0   0   0    1    1    69
09 001 01  0    1    0   1   0    1    1    71
0a 001 01  0    0    0   0   0    1    1    79
0b 001 01  0    0    0   0   0    1    1    81
0c 001 01  0    0    0   0   0    1    1    89
0d 001 01  0    0    0   0   0    1    1    91
0e 001 01  0    0    0   0   0    1    1    99
0f 001 01  0    0    0   0   0    1    1    A1
10 001 01  1    1    0   1   0    1    1    C1
11 001 01  1    1    0   1   0    1    1    A9
12 001 01  1    1    0   1   0    1    1    B1
13 001 01  1    1    0   1   0    1    1    B9
14 000 00  1    0    0   0   0    0    0    00
15 001 01  1    1    0   1   0    1    1    C9
16 000 00  1    0    0   0   0    0    0    00
17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ21 -> 0:21
.................................... done.
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1
PCI: Using ACPI for IRQ routing
vesafb: probe of vesafb0 failed with error -6
Simple Boot Flag at 0x3a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
SGI XFS with ACLs, security attributes, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
PCI: Via IRQ fixup for 0000:00:09.0, from 5 to 9
PCI: Via IRQ fixup for 0000:00:09.1, from 11 to 1
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA P4X266 chipset
agpgart: Maximum main memory to use for agp memory: 1919M
agpgart: AGP aperture is 128M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6Y080L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SONY DVD RW DRU-530A, ATAPI CD/DVD-ROM drive
hdd: SONY CD-RW CRX320E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X DVD-ROM CD-R/RW CD-MRW drive, 2048kB Cache, UDMA(33)
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
ehci_hcd 0000:00:09.2: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:09.2: irq 169, pci mem f888e000
ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:09.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:09.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:09.0: irq 185, io base 0000b400
uhci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:09.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:09.1: irq 193, io base 0000b000
uhci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
uhci_hcd 0000:00:11.2: irq 201, io base 0000a000
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:11.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
uhci_hcd 0000:00:11.3: irq 201, io base 00009800
uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
   8regs     :  2420.000 MB/sec
   8regs_prefetch:  2180.000 MB/sec
   32regs    :  1884.000 MB/sec
   32regs_prefetch:  1488.000 MB/sec
   pIII_sse  :  1292.000 MB/sec
   pII_mmx   :  4264.000 MB/sec
   p5_mmx    :  5712.000 MB/sec
raid5: using function: pIII_sse (1292.000 MB/sec)
md: multipath personality registered as nr 7
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
PM: Reading pmdisk image.
PM: Resume from disk failed.
ACPI: (supports S0 S1 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
usb 1-2: new high speed USB device using address 2
usb 4-1: new full speed USB device using address 2
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 3 ports detected
usb 4-2: new full speed USB device using address 3
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 248k freed
usb 4-1.1: new full speed USB device using address 4
input: USB HID v1.00 Keyboard [Silitek IBM USB HUB KEYBOARD] on usb-0000:00:11.2-1.1
input: USB HID v1.00 Device [Silitek IBM USB HUB KEYBOARD] on usb-0000:00:11.2-1.1
usb 4-1.2: new low speed USB device using address 5
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:11.2-1.2
Adding 265064k swap on /dev/discs/disc0/part2.  Priority:-1 extents:1
EXT3-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT3 FS on hda3, internal journal
ide-floppy driver 0.99.newide
Real Time Clock Driver v1.12
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
  http://www.scyld.com/network/ne2k-pci.html
eth0: RealTek RTL-8029 found at 0xa800, IRQ 185, 00:E0:7D:74:ED:3F.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
Initializing USB Mass Storage driver...
usb-storage: USB Mass Storage device detected
usb-storage: altsetting is 0, id_index is 120
usb-storage: -- associate_dev
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: Endpoints: In: 0xf7c8b768 Out: 0xf7c8b754 Int: 0x00000000 (Period 0)
usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=88 len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=02 len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: GetMaxLUN command result is -32, data is 0
usb-storage: *** thread sleeping.
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage:  12 00 00 00 24 00
usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
usb-storage: Status code 0; transferred 36/36
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
  Vendor: Maxtor 6  Model: Y080P0            Rev:  0 0
  Type:   Direct-Access                      ANSI SCSI revision: 02
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage:  00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_CAPACITY (10 bytes)
usb-storage:  25 00 00 00 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x3 L 8 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
usb-storage: Status code 0; transferred 8/8
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0:<7>usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage:  28 00 00 00 00 00 00 00 08 00
usb-storage: Bulk Command S 0x43425355 T 0x4 L 4096 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
usb-storage: Status code 0; transferred 4096/4096
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x4 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
p1 p2 p3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad LUN (0:1)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
USB Mass Storage device found at 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Disabled Privacy Extensions on device c05b68c0(lo)
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware dire
---------------------------------------------------------------------------------------
file:/root/Desktop/dmesg without usb enabledoot@n6re ~]# dmesg
Linux version 2.6.7 (root@earth) (gcc version 3.4.0) #1 SMP Wed Jun 16 07:04:51 PDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fffc000 (usable)
BIOS-e820: 000000007fffc000 - 000000007ffff000 (ACPI data)
BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 524284
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:16
  HighMem zone: 294908 pages, LIFO batch:16
DMI 2.3 present.
ACPI: RSDP (v000 ASUS                                      ) @ 0x000f5e30
ACPI: RSDT (v001 ASUS   A7V333   0x42302e31 MSFT 0x31313031) @ 0x7fffc000
ACPI: FADT (v001 ASUS   A7V333   0x42302e31 MSFT 0x31313031) @ 0x7fffc0b2
ACPI: BOOT (v001 ASUS   A7V333   0x42302e31 MSFT 0x31313031) @ 0x7fffc030
ACPI: MADT (v001 ASUS   A7V333   0x42302e31 MSFT 0x31313031) @ 0x7fffc058
ACPI: DSDT (v001   ASUS A7V333   0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:6 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Linux-2.6.7 ro root=303 devfs=mount ide=reverse
ide_setup: ide=reverse : Enabled support for IDE inverse scan order.
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 1599.900 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 2073440k/2097136k available (4049k kernel code, 22580k reserved, 1169k data, 248k init, 1179632k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3145.72 BogoMIPS
Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU:     After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU:     After all inits, caps: 0383fbff c1cbfbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: AMD Athlon(TM) XP 1900+ stepping 02
per-CPU timeslice cutoff: 731.65 usecs.
task migration cache decay timeout: 1 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Total of 1 processors activated (3145.72 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1599.0312 MHz.
..... host bus clock speed is 266.0552 MHz.
Brought up 1 CPUs
CPU0:  online
domain 0: span 1
  groups: 1
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf1aa0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14) *9
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
00:00:05[A] -> 2-17 -> IRQ 169 level low
00:00:05[B] -> 2-18 -> IRQ 177 level low
00:00:06[A] -> 2-19 -> IRQ 185 level low
00:00:0c[B] -> 2-16 -> IRQ 193 level low
00:00:11[D] -> 2-21 -> IRQ 201 level low
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00178002
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0002
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00  1    0    0   0   0    0    0    00
01 001 01  0    0    0   0   0    1    1    39
02 001 01  0    0    0   0   0    1    1    31
03 001 01  0    0    0   0   0    1    1    41
04 001 01  0    0    0   0   0    1    1    49
05 001 01  0    0    0   0   0    1    1    51
06 001 01  0    0    0   0   0    1    1    59
07 001 01  0    0    0   0   0    1    1    61
08 001 01  0    0    0   0   0    1    1    69
09 001 01  0    1    0   1   0    1    1    71
0a 001 01  0    0    0   0   0    1    1    79
0b 001 01  0    0    0   0   0    1    1    81
0c 001 01  0    0    0   0   0    1    1    89
0d 001 01  0    0    0   0   0    1    1    91
0e 001 01  0    0    0   0   0    1    1    99
0f 001 01  0    0    0   0   0    1    1    A1
10 001 01  1    1    0   1   0    1    1    C1
11 001 01  1    1    0   1   0    1    1    A9
12 001 01  1    1    0   1   0    1    1    B1
13 001 01  1    1    0   1   0    1    1    B9
14 000 00  1    0    0   0   0    0    0    00
15 001 01  1    1    0   1   0    1    1    C9
16 000 00  1    0    0   0   0    0    0    00
17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ21 -> 0:21
.................................... done.
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1
PCI: Using ACPI for IRQ routing
vesafb: probe of vesafb0 failed with error -6
Simple Boot Flag at 0x3a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
SGI XFS with ACLs, security attributes, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
PCI: Via IRQ fixup for 0000:00:09.0, from 5 to 9
PCI: Via IRQ fixup for 0000:00:09.1, from 11 to 1
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA P4X266 chipset
agpgart: Maximum main memory to use for agp memory: 1919M
agpgart: AGP aperture is 128M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6Y080L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SONY DVD RW DRU-530A, ATAPI CD/DVD-ROM drive
hdd: SONY CD-RW CRX320E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X DVD-ROM CD-R/RW CD-MRW drive, 2048kB Cache, UDMA(33)
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
ehci_hcd 0000:00:09.2: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:09.2: irq 169, pci mem f888e000
ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:09.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:09.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:09.0: irq 185, io base 0000b400
uhci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:09.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:09.1: irq 193, io base 0000b000
uhci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
uhci_hcd 0000:00:11.2: irq 201, io base 0000a000
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:11.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
uhci_hcd 0000:00:11.3: irq 201, io base 00009800
uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
   8regs     :  2420.000 MB/sec
   8regs_prefetch:  2180.000 MB/sec
   32regs    :  1880.000 MB/sec
   32regs_prefetch:  1488.000 MB/sec
   pIII_sse  :  1292.000 MB/sec
   pII_mmx   :  4260.000 MB/sec
   p5_mmx    :  5712.000 MB/sec
raid5: using function: pIII_sse (1292.000 MB/sec)
md: multipath personality registered as nr 7
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
PM: Reading pmdisk image.
PM: Resume from disk failed.
ACPI: (supports S0 S1 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
usb 4-1: new full speed USB device using address 2
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 3 ports detected
usb 4-2: new full speed USB device using address 3
usb 4-1.1: new full speed USB device using address 4
input: USB HID v1.00 Keyboard [Silitek IBM USB HUB KEYBOARD] on usb-0000:00:11.2-1.1
input: USB HID v1.00 Device [Silitek IBM USB HUB KEYBOARD] on usb-0000:00:11.2-1.1
usb 4-1.2: new low speed USB device using address 5
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:11.2-1.2
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 248k freed
Adding 265064k swap on /dev/discs/disc0/part2.  Priority:-1 extents:1
EXT3-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT3 FS on hda3, internal journal
ide-floppy driver 0.99.newide
Real Time Clock Driver v1.12
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
  http://www.scyld.com/network/ne2k-pci.html
eth0: RealTek RTL-8029 found at 0xa800, IRQ 185, 00:E0:7D:74:ED:3F.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Disabled Privacy Extensions on device c05b68c0(lo)
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
eth0: no IPv6 routers present
[root@n6re ~]#
----------------------------------------------------------------------------------------

I believe the memory arrangement was 512, 1G, and 512 in the three slots for ddram in a7v333 mobo.

The same problem was experienced with USB enabled (hard drive connected and running in external fixture) while using three 512MB sticks.

I suspect the problem was introduced by a recent pkg upgrade but don't know which package would affect the performance of highmem and usb2.0 combination.  The highmem enabled in 2.6.7 is 4G as I understand it.

I did not record the recent upgrade packages, recent being the last week to ten days.

I hope this helps to bring me to a better understanding of the problem.


Sign of the times: Navajo blanket..made in China
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit!     X-ray confirms Iam spineless!

Offline

#4 2004-08-28 16:51:53

lilsirecho
Veteran
Registered: 2003-10-24
Posts: 5,000

Re: USB 2.0 drive shuts down highmem

The problem with USB interfering with highmem as described in these posts still persists.


Sign of the times: Navajo blanket..made in China
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit!     X-ray confirms Iam spineless!

Offline

#5 2004-09-01 03:53:54

lilsirecho
Veteran
Registered: 2003-10-24
Posts: 5,000

Re: USB 2.0 drive shuts down highmem

Added info for this date;   Dmesg without external USB HDD connected....

------------------------------------------------------------------------------------
6 PDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000009fffc000 (usable)
BIOS-e820: 000000009fffc000 - 000000009ffff000 (ACPI data)
BIOS-e820: 000000009ffff000 - 00000000a0000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
1663MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 655356
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:16
  HighMem zone: 425980 pages, LIFO batch:16
DMI 2.3 present.
ACPI: RSDP (v000 ASUS                                      ) @ 0x000f5e30
AC
-------------------------------------------------------------------------------------
The above lists the first few lines of dmesg which indicates the presence of highmem.

The next file presented here is fstab:   Perhaps entries are incorrect or entries are missing to cause the loss of highmem with the connection of USB HDD as indicated in the previous posting showing multi-printouts regarding usb storage.

---------------------------------------------------------------------------------------

#
# /etc/fstab: static file system information
#
# <file system>        <dir>     <type>    <options>              <dump> <pass>

#/dev/#EXT2FS_BOOT#    /boot     ext2      defaults               0      1
#/dev/#REISERFS_ROOT#  /         reiserfs  defaults               0      0
#/dev/#EXT2FS_ROOT#    /         ext2      defaults               0      1
#/dev/#SWAP#           swap      swap      defaults               0      0
#/dev/#REISERFS_HOME#  /home     reiserfs  defaults               0      0
#/dev/#EXT2FS_HOME#    /home     ext2      defaults               0      2

/dev/cdroms/cdrom0     /mnt/cd   iso9660   ro,user,noauto,unhide  0      0
/dev/cdroms/cdrom0     /mnt/dvd  udf       ro,user,noauto,unhide  0      0
/dev/floppy/0          /mnt/fl   vfat      user,noauto,unhide     0      0
none                  /dev/pts  devpts    defaults            0   0
none                  /proc/bus/usb   usbdevfs   defaults  0   0

none                   /proc     proc      defaults               0      0
none                   /dev/shm  tmpfs     defaults               0      0
tmpfs                  /tmp      tmpfs     size=2G,nr_inodes=10k  0      0

/dev/discs/disc0/part3 / ext3 defaults 0 1
/dev/discs/disc0/part1 /boot ext2 defaults 0 1
/dev/discs/disc0/part2 swap swap defaults 0 0
/dev/sda1              /mnt/fat1 vfat  defaults 0   0
/dev/sdb3              /mnt/drive ext3  defaults 0  0
/dev/sdb1              /mnt/fat2  vfat  defaults 0   0
/dev/sdc1              /mnt/fat3  vfat  defaults 0   0
/dev/sdd1              /mnt/fat4   vfat defaults   0   0

I will try anything at least once!!!!!


Sign of the times: Navajo blanket..made in China
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit!     X-ray confirms Iam spineless!

Offline

Board footer

Powered by FluxBB