You are not logged in.
to be more clear, what im trying to archive is that netcfg will first try to connect to my home network, and if fails maybe some other predifined networks that i use often, but if fails on all profiles it should try to connect to any network avaible.
is it possible? if so please tell me how, i tried a lot of combinations and documentation reading but found no solution
on bithe the stable netcfg and the one in testing.
thanks.
Last edited by Black Mage (2008-09-18 14:40:28)
Offline
I think you could do this: have a profile defined with SCAN=no and SECURITY=wpa-config. Then in your wpa_supplicant.conf file, you tell it to connect to the networks you most want, if it can (I think the setting for this is priority=N, with higher N being tried first), otherwise connect to any open network. With this setup, wpa_supplicant does all the work of checking for the different networks. You'd only have one netcfg profile, which passed off control to your wpa_supplicant.conf file.
Offline
Thanks for the quick answer the "problem" was solved and it all worked.
Offline