You are not logged in.

Pages: 1

#1 2008-10-09 23:29:30

Alberto Ferreira
Member
Registered: 2008-10-08
Posts: 41

Can't run graphic interface [SOLVED]

I'm new to Arch and I can't get the visual stuff to work.
I installed xorg and openbox, however, when I run xinit as root it correctly shows a cross and a Xterm, but when I do it as a normal user the screen blinks once and returns to text mode.

I get this errors when i type "xinit" either as root or normal user:

X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-ARCH i686
Current Operating System: Linux Compaq 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 18:07:19 CEST 2008 i686
Build Date: 17 August 2008  10:53:07AM

    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct  9 19:09:26 2008
(==) Using config file: "/etc/X11/xorg.conf"

(II) Module "ddc" already built-in
(EE) Failed to load module "type1" (module does not exist, 0)
(II) Module "ramdac" already built-in
(II) Module "i2c" already built-in
(II) Module "ddc" already built-in
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error:            Can't find file "pt-latin1" for symbols include
>                   Exiting
>                   Abandoning symbols file "default"
Errors from xkbcomp are not fatal to the X server
Could not init font path element /usr/share/fonts/TTF, removing from list!
Could not init font path element /usr/share/fonts/Type1, removing from list!


waiting for X server to shut down FreeFontPath: FPE "/usr/share/fonts/misc:unscaled" refcount is 2, should be 1; fixing.

I use portuguese as my system language.

How can I run the graphical interface without being root and how do I correct all those errors?

Thanks in advance,
Alberto

Last edited by Alberto Ferreira (2009-04-24 15:34:12)

Offline

#2 2008-10-09 23:46:04

verve
Member
Registered: 2008-09-08
Posts: 30

Re: Can't run graphic interface [SOLVED]

post /etc/xorg.conf

Offline

#3 2008-10-10 14:20:11

z0phi3l
Member
From: Waterbury CT
Registered: 2007-11-26
Posts: 278

Re: Can't run graphic interface [SOLVED]

Do you have a DW/WM set in your non root user's xinitrc file?

Offline

#4 2008-10-10 15:17:43

Mr.Elendig
#archlinux@freenode channel op
From: The intertubes
Registered: 2004-11-07
Posts: 4,094

Re: Can't run graphic interface [SOLVED]

The keymap is wrong, so change that, also, install some ttf fonts.

Evil #archlinux@libera.chat channel op and general support dude.
. files on github, Screenshots, Random pics and the rest

Offline

#5 2008-10-10 16:25:59

Alberto Ferreira
Member
Registered: 2008-10-08
Posts: 41

Re: Can't run graphic interface [SOLVED]

I didn't have a /etc/xorg.conf however I had a /etc/X11/xorg.conf that i had generated with "hwd -xa":

Section "ServerLayout"
    Identifier     "Xorg Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
# PS/2 Mouse not detected
# Serial Mouse not detected
        InputDevice    "USB Mouse" "CorePointer"
EndSection

Section "ServerFlags"
    Option "AllowMouseOpenFail"  "true"
    
EndSection

Section "Files"
    RgbPath      "/usr/share/X11/rgb"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/misc:unscaled"
    FontPath     "/usr/share/fonts/misc"
    FontPath     "/usr/share/fonts/75dpi:unscaled"
    FontPath     "/usr/share/fonts/75dpi"
    FontPath     "/usr/share/fonts/100dpi:unscaled"
    FontPath     "/usr/share/fonts/100dpi"
    FontPath     "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
    FontPath     "/usr/share/fonts/cyrillic"
#    FontPath     "/usr/share/lib/X11/fonts/latin2/75dpi"
#    FontPath     "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    FontPath     "/usr/share/fonts/Type1"
    FontPath     "/usr/share/fonts/ttf/western"
    FontPath     "/usr/share/fonts/ttf/decoratives"
    FontPath     "/usr/share/fonts/truetype"
    FontPath     "/usr/share/fonts/truetype/openoffice"
    FontPath     "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath     "/usr/share/fonts/latex-ttf-fonts"
    FontPath     "/usr/share/fonts/defoma/CID"
    FontPath     "/usr/share/fonts/defoma/TrueType"
EndSection

Section "Module"
        Load  "ddc"  # ddc probing of monitor
    Load  "dbe"
    Load  "dri"
    Load  "extmod"
    Load  "glx"
        Load  "bitmap" # bitmap-fonts
    Load  "type1"
    Load  "freetype"
    Load  "record"
    #   Load  "synaptics"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "keyboard"
        Option      "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "pt-latin1"
    Option "XkbVariant" ""
EndSection

Section "InputDevice"
    Identifier  "Serial Mouse"
    Driver      "mouse"
    Option      "Protocol" "Microsoft"
    Option      "Device" "/dev/ttyS0"
    Option      "Emulate3Buttons" "true"
    Option      "Emulate3Timeout" "70"
    Option        "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
    Identifier  "PS/2 Mouse"
    Driver      "mouse"
    Option      "Protocol" "auto"
    Option          "ZAxisMapping"          "4 5"
    Option      "Device" "/dev/psaux"
    Option      "Emulate3Buttons" "true"
    Option      "Emulate3Timeout" "70"
    Option        "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
        Identifier      "USB Mouse"
        Driver          "mouse"
        Option          "Device"                "/dev/input/mice"
    Option        "SendCoreEvents"    "true"
        Option          "Protocol"              "IMPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Buttons"               "5"
EndSection

# Auto-generated by Archie mkxcfg

Section "Monitor"
    Identifier "Monitor0"
        Option "DPMS" "true"
#    HorizSync    28.0 - 78.0 # Warning: This may fry very old Monitors
    HorizSync    28.0 - 96.0 # Warning: This may fry old Monitors
    VertRefresh  50.0 - 75.0 # Very conservative. May flicker.
#    VertRefresh  50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    #  Default modes distilled from
    #      "VESA and Industry Standards and Guide for Computer Display Monitor
    #       Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    #  $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x350"    31.5  640  672  736  832    350  382  385  445 +hsync -vsync
    # 640x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x400"    31.5  640  672  736  832    400  401  404  445 -hsync +vsync
    # 720x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "720x400"    35.5  720  756  828  936    400  401  404  446 -hsync +vsync
    # 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
    ModeLine "640x480"    25.2  640  656  752  800    480  490  492  525 -hsync -vsync
    # 640x480 @ 72Hz (VESA) hsync: 37.9kHz
    ModeLine "640x480"    31.5  640  664  704  832    480  489  491  520 -hsync -vsync
    # 640x480 @ 75Hz (VESA) hsync: 37.5kHz
    ModeLine "640x480"    31.5  640  656  720  840    480  481  484  500 -hsync -vsync
    # 640x480 @ 85Hz (VESA) hsync: 43.3kHz
    ModeLine "640x480"    36.0  640  696  752  832    480  481  484  509 -hsync -vsync
    # 800x600 @ 56Hz (VESA) hsync: 35.2kHz
    ModeLine "800x600"    36.0  800  824  896 1024    600  601  603  625 +hsync +vsync
    # 800x600 @ 60Hz (VESA) hsync: 37.9kHz
    ModeLine "800x600"    40.0  800  840  968 1056    600  601  605  628 +hsync +vsync
    # 800x600 @ 72Hz (VESA) hsync: 48.1kHz
    ModeLine "800x600"    50.0  800  856  976 1040    600  637  643  666 +hsync +vsync
    # 800x600 @ 75Hz (VESA) hsync: 46.9kHz
    ModeLine "800x600"    49.5  800  816  896 1056    600  601  604  625 +hsync +vsync
    # 800x600 @ 85Hz (VESA) hsync: 53.7kHz
    ModeLine "800x600"    56.3  800  832  896 1048    600  601  604  631 +hsync +vsync
    # 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
    ModeLine "1024x768"   44.9 1024 1032 1208 1264    768  768  776  817 +hsync +vsync Interlace
    # 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
    ModeLine "1024x768"   65.0 1024 1048 1184 1344    768  771  777  806 -hsync -vsync
    # 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
    ModeLine "1024x768"   75.0 1024 1048 1184 1328    768  771  777  806 -hsync -vsync
    # 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
    ModeLine "1024x768"   78.8 1024 1040 1136 1312    768  769  772  800 +hsync +vsync
    # 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
    ModeLine "1024x768"   94.5 1024 1072 1168 1376    768  769  772  808 +hsync +vsync
    # 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
    ModeLine "1152x864"  108.0 1152 1216 1344 1600    864  865  868  900 +hsync +vsync
    # 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
    ModeLine "1280x960"  108.0 1280 1376 1488 1800    960  961  964 1000 +hsync +vsync
    # 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
    ModeLine "1280x960"  148.5 1280 1344 1504 1728    960  961  964 1011 +hsync +vsync
    # 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688   1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
    ModeLine "1280x1024" 135.0 1280 1296 1440 1688   1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728   1024 1025 1028 1072 +hsync +vsync
    # 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
    ModeLine "1600x1200" 162.0 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
    ModeLine "1600x1200" 175.5 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
    ModeLine "1600x1200" 189.0 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
    # 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
    ModeLine "1792x1344" 204.8 1792 1920 2120 2448   1344 1345 1348 1394 -hsync +vsync
    # 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
    ModeLine "1792x1344" 261.0 1792 1888 2104 2456   1344 1345 1348 1417 -hsync +vsync
    # 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
    ModeLine "1856x1392" 218.3 1856 1952 2176 2528   1392 1393 1396 1439 -hsync +vsync
    # 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1856x1392" 288.0 1856 1984 2208 2560   1392 1393 1396 1500 -hsync +vsync
    # 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600   1440 1441 1444 1500 -hsync +vsync
    # 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640   1440 1441 1444 1500 -hsync +vsync
    # Additional modelines
    ModeLine "1800x1440"  230    1800 1896 2088 2392  1440 1441 1444 1490 +HSync +VSync
    ModeLine "1800x1440"  250    1800 1896 2088 2392  1440 1441 1444 1490 +HSync +VSync
    # Extended modelines with GTF timings
    # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
    ModeLine "640x480"  43.16  640 680 744 848  480 481 484 509  -HSync +Vsync
    # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
    ModeLine "768x576"  34.96  768 792 872 976  576 577 580 597  -HSync +Vsync
    # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
    ModeLine "768x576"  42.93  768 800 880 992  576 577 580 601  -HSync +Vsync
    # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
    ModeLine "768x576"  45.51  768 808 888 1008  576 577 580 602  -HSync +Vsync
    # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
    ModeLine "768x576"  51.84  768 808 888 1008  576 577 580 605  -HSync +Vsync
    # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
    ModeLine "768x576"  62.57  768 816 896 1024  576 577 580 611  -HSync +Vsync
    # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
    ModeLine "800x600"  68.18  800 848 936 1072  600 601 604 636  -HSync +Vsync
    # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
    ModeLine "1024x768"  113.31  1024 1096 1208 1392  768 769 772 814  -HSync +Vsync
    # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
    ModeLine "1152x864"  81.62  1152 1216 1336 1520  864 865 868 895  -HSync +Vsync
    # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
    ModeLine "1152x864"  119.65  1152 1224 1352 1552  864 865 868 907  -HSync +Vsync
    # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
    ModeLine "1152x864"  143.47  1152 1232 1360 1568  864 865 868 915  -HSync +Vsync
    # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
    ModeLine "1280x960"  124.54  1280 1368 1504 1728  960 961 964 1001  -HSync +Vsync
    # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
    ModeLine "1280x960"  129.86  1280 1368 1504 1728  960 961 964 1002  -HSync +Vsync
    # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
    ModeLine "1280x960"  178.99  1280 1376 1520 1760  960 961 964 1017  -HSync +Vsync
    # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
    ModeLine "1280x1024"  190.96  1280 1376 1520 1760  1024 1025 1028 1085  -HSync +Vsync
    # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
    ModeLine "1400x1050"  122.61  1400 1488 1640 1880  1050 1051 1054 1087  -HSync +Vsync
    # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
    ModeLine "1400x1050"  149.34  1400 1496 1648 1896  1050 1051 1054 1094  -HSync +Vsync
    # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
    ModeLine "1400x1050"  155.85  1400 1496 1648 1896  1050 1051 1054 1096  -HSync +Vsync
    # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
    ModeLine "1400x1050"  179.26  1400 1504 1656 1912  1050 1051 1054 1103  -HSync +Vsync
    # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
    ModeLine "1400x1050"  214.39  1400 1512 1664 1928  1050 1051 1054 1112  -HSync +Vsync
    # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
    ModeLine "1600x1200"  280.64  1600 1728 1904 2208  1200 1201 1204 1271  -HSync +Vsync
EndSection

# Auto-generated by Archie mkxcfg


Section "Device"
    Identifier  "Card0"
    Driver      "trident"
    VendorName  "All"
    BoardName   "All"
EndSection


Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    DefaultColorDepth 16
    SubSection "Display"
        Depth     1
        Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     4
        Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     8
        Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     15
        Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     16
        Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     24
        Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     32
        Modes "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "DRI"
    Mode 0666
EndSection

About fonts, which ones do you recommend? I would also like to have nice console fonts, I loved the boot sequence from this guy, how does he do this?:http://br.youtube.com/watch?v=xK6mNjmXr … re=related

Offline

#6 2008-10-10 16:30:36

Misfit138
Misfit Emeritus
From: USA
Registered: 2006-11-27
Posts: 4,189

Re: Can't run graphic interface [SOLVED]

FYI, don't use quote tags when posting code. Rather, use the code tags.
Fixed it for you. wink

Amiga 1000 restomod
IBM PCjr restomod
C=64 restodmod
Sauengard

Offline

#7 2008-10-10 23:45:07

Alberto Ferreira
Member
Registered: 2008-10-08
Posts: 41

Re: Can't run graphic interface [SOLVED]

Thanks, but I haven't fixed my problem yet. Anyone?

Offline

#8 2008-10-11 12:22:41

Mr.Elendig
#archlinux@freenode channel op
From: The intertubes
Registered: 2004-11-07
Posts: 4,094

Re: Can't run graphic interface [SOLVED]

Did you change the keymap and installed some ttf fonts, like I suggested?

Last edited by Mr.Elendig (2008-10-11 12:23:06)

Evil #archlinux@libera.chat channel op and general support dude.
. files on github, Screenshots, Random pics and the rest

Offline

#9 2008-10-11 13:29:57

Alberto Ferreira
Member
Registered: 2008-10-08
Posts: 41

Re: Can't run graphic interface [SOLVED]

I have already installed all fonts necessary.
Also, I have changed the keymap to "pt-latin9.map.gz" according to this page
http://wiki.archlinux.org/index.php/KEYMAP
but it still says that it hasn't been found :s ??


But still I believe that even if I find the correct keymap it won't work because I can run xinit as root, my problem is running it as a normal user, the screen flashes once in a black color and then it goes back to the console:(

Last edited by Alberto Ferreira (2008-10-11 13:42:10)

Offline

#10 2008-10-11 14:03:04

ghostHack
Member
From: Bristol UK
Registered: 2008-02-29
Posts: 261

Re: Can't run graphic interface [SOLVED]

The link you posted is about setting the keymap in the virtual consoles, it has nothing to do with X.  Try setting 

Option "XkbLayout" "pt"

in your xorg.conf

Also, check that your normal user has a valid .xinitrc file.

Offline

#11 2008-10-11 14:25:13

Alberto Ferreira
Member
Registered: 2008-10-08
Posts: 41

Re: Can't run graphic interface [SOLVED]

Thanks a lot, I've set .xinitrc to:

exec xterm

Now I can launch it as a normal user big_smile

I can instead of exec xterm put "exec openbox"?

I mean, Can I use openbox alone (without gnome, xfce,...)?
Because when I run it it says:

Openbox-Message: Couldn't set locale from environment.
openbox: symbol lookup error: /usr/lib/libxml2.so.2: undefined symbol: gzopen64

And about the keymap, the error now is:

Warning:        Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
                     Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Warning: locale not supported by C library, locale unchanged

waiting for X server to shut down FreeFontPath: FPE "/usr/share/fonts/misc:unscaled" refcount is 2, should be1; fixing

Offline

#12 2008-10-11 16:01:54

ghostHack
Member
From: Bristol UK
Registered: 2008-02-29
Posts: 261

Re: Can't run graphic interface [SOLVED]

can you post the output from the 'locale' command please.

Offline

#13 2008-10-11 16:30:03

Alberto Ferreira
Member
Registered: 2008-10-08
Posts: 41

Re: Can't run graphic interface [SOLVED]

Here it is:

locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
LANG=pt_PT.utf8
LC_CTYPE="pt_PT.utf8"
LC_NUMERIC="pt_PT.utf8"
LC_TIME="pt_PT.utf8"
LC_COLLATE=C
LC_MONETARY="pt_PT.utf8"
LC_MESSAGES="pt_PT.utf8"
LC_PAPER="pt_PT.utf8"
LC_NAME="pt_PT.utf8"
LC_ADDRESS="pt_PT.utf8"
LC_TELEPHONE="pt_PT.utf8"
LC_MEASUREMENT="pt_PT.utf8"
LC_IDENTIFICATION="pt_PT.utf8"
LC_ALL=

Offline

Pages: 1

Board footer

Powered by FluxBB