You are not logged in.
Pages: 1
Hi,
I'm having problems with my SATA drives. They both are in a RAID0 and this RAID is in a logical volume of LVM (I followed the wiki on raid and lvm2). However, I have a poor performance on my AMD Sempron LE-1150 (Single Core with 2000MHz, 64bit), I only get about 30MB/s when writing and 110MB/s when reading. The mainboard has an Nvidia Geforce 8200 Chipset. Compared to my desktop PC (AMD Phenom 9950), these things are different when benchmarking with bonnie++:
- user cpu load is much lower on the server
- system load is MUCH higher on the server
- server has much more soft interrupts on the server in top
- idle is much higher on the desktop, as 2 two of the cores do nothing
Below are my results with bonnie++. The server is to be an ftp server with Gigabit access. With ubuntu server, no lvm, a different mainboard and a faster processor, there was no problem with the speed, so the harddrives are working.
Does anybody have an idea what my problem is?
bonnie++'s output for the server:
Version 1.03b ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
archserver 4G 24070 81 43005 71 47630 41 39746 93 152272 83 449.5 2
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 9797 98 +++++ +++ 10636 99 5477 98 +++++ +++ 8655 99
archserver,4G,24070,81,43005,71,47630,41,39746,93,152272,83,449.5,2,16,9797,98,+++++,+++,10636,99,5477,98,+++++,+++,8655,99
And the desktop:
Version 1.03b ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
Arch 8G 53789 91 65234 16 34312 8 56853 89 75264 6 174.8 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 +++++ +++ +++++ +++ +++++ +++ +++++ +++ +++++ +++ +++++ +++
Arch,8G,53789,91,65234,16,34312,8,56853,89,75264,6,174.8,0,16,+++++,+++,+++++,+++,+++++,+++,+++++,+++,+++++,+++,+++++,+++
I'm not to creative when it comes to names...
EDIT: Reading speed is perfect. When downloading something from the ftp (it's vsftpd, btw), the server only has about 70% load and sends at full speed, as you can also see from the bonnie++ table. The HDDs in desktop and server are similiar (all Seagate) and the server is about twice as fast as the desktop. So absolutely no complains about that.
Last edited by IncredibleLaser (2008-11-13 17:05:44)
Offline
Pages: 1