You are not logged in.

#1 2008-11-18 23:48:12

fukawi2
Ex-Administratorino
From: .vic.au
Registered: 2007-09-28
Posts: 6,217
Website

VLC Convert to OGG Problems

Hi All,

I'm trying to Convert a Network Stream using VLC, but I'm getting the errors below. Converting to MPEG-2 works fine.

[00000474] main input debug: `http://vfbrat-east.dcsi.net.au:8000' successfully opened
[00000405] qt4 interface debug: New Event: type 1103
[00000405] qt4 interface debug: Updating the stream status: 3
[00000493] mpeg_audio packetizer debug: MPGA channels:1 samplerate:22050 bitrate:24
[00000474] main input debug: selecting program id=0
[00000405] qt4 interface debug: New Event: type 1108
[00000494] main packetizer debug: looking for packetizer module: 18 candidates
[00000494] main packetizer debug: using packetizer module "mpeg_audio"
[00000494] main packetizer debug: TIMER module_Need() : 0.245 ms - Total 0.245 ms / 1 intvls (Avg 0.245 ms)
[00000474] main input debug: stream out mode -> no decoder thread
[00000494] mpeg_audio packetizer debug: MPGA channels:1 samplerate:22050 bitrate:24
[00000475] main stream output debug: adding a new sout input (sout_input:0x910c980)
[00000476] stream_out_transcode stream out debug: creating audio transcoding from fcc=`mpga' to fcc=`vorb'
[00000495] main decoder debug: looking for decoder module: 31 candidates
[00000495] main decoder debug: using decoder module "mpeg_audio"
[00000495] main decoder debug: TIMER module_Need() : 0.269 ms - Total 0.269 ms / 1 intvls (Avg 0.269 ms)
[00000496] main encoder debug: looking for encoder module: 10 candidates
*[00000496] vorbis encoder error: CBR mode initialisation failed
[00000496] main encoder debug: TIMER module_Need() : 10.023 ms - Total 10.023 ms / 1 intvls (Avg 10.023 ms)
*[00000476] stream_out_transcode stream out error: cannot find audio encoder (module:any fourcc:vorb)
[00000495] main decoder debug: removing module "mpeg_audio"
*[00000476] stream_out_transcode stream out error: cannot create audio chain
*[00000494] main packetizer error: cannot create packetizer output (mpga)
[00000474] main input debug: control type=1

Does anyone have any ideas?

Offline

Board footer

Powered by FluxBB