You are not logged in.
I just connected a card reader to my MBO USB port and it doesn't seem to work quite at all. I connect a card but nothing happens. Should I load some special modules for that to work? What do these errors in dmesg mean? Any help?
Here's some hopefully useful information:
quad ~ $ lsmod | grep usb
usbhid 46016 0
hid 41856 1 usbhid
ff_memless 6664 1 usbhid
usbcore 134384 4 usbhid,ehci_hcd,ohci_hcd
quad ~ $ dmesg | grep usb
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usb usb1: configuration #1 chosen from 1 choice
usb usb2: configuration #1 chosen from 1 choice
usb usb3: configuration #1 chosen from 1 choice
usb usb4: configuration #1 chosen from 1 choice
usb 3-1: new full speed USB device using ohci_hcd and address 2
usb 3-1: device descriptor read/64, error -62
usb usb5: configuration #1 chosen from 1 choice
usb 3-1: device descriptor read/64, error -62
usb usb6: configuration #1 chosen from 1 choice
usb 3-1: new full speed USB device using ohci_hcd and address 4
usb 3-1: device descriptor read/64, error -62
usb 3-1: device descriptor read/64, error -62
usb 3-1: new full speed USB device using ohci_hcd and address 5
usb 3-1: device descriptor read/64, error -62
usb 3-1: device descriptor read/64, error -62
usb 3-1: new full speed USB device using ohci_hcd and address 6
usb 3-1: device not accepting address 6, error -62
usb 3-1: new full speed USB device using ohci_hcd and address 7
usb 3-1: device not accepting address 7, error -71
usb 4-2: new low speed USB device using ohci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:13.3-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
quad ~ $ lsusb
Bus 006 Device 004: ID 0930:6545 Toshiba Corp.
Bus 006 Device 001: ID 1d6b:0002
Bus 005 Device 001: ID 1d6b:0001
Bus 003 Device 001: ID 1d6b:0001
Bus 002 Device 001: ID 1d6b:0001
Bus 001 Device 001: ID 1d6b:0001
Bus 004 Device 001: ID 1d6b:0001
Bus 004 Device 002: ID 15d9:0a33
This is the card reader https://pood.rover.ee/product/101748/
Cheers!
format c:\ | rm -rf /
Offline
Looks like its not connected properly
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
That is how mine shows up...
You got it wired up correctly on motherboard?
Mr Green
Offline
Hmm, I'm pretty sure, I'll double-check, and try it out on another machine, to see if the reader itself isn't broken...
format c:\ | rm -rf /
Offline
usb 3-1: new full speed USB device using ohci_hcd and address 4
usb 3-1: device descriptor read/64, error -62
usb 3-1: device descriptor read/64, error -62
usb 3-1: new full speed USB device using ohci_hcd and address 5
usb 3-1: device descriptor read/64, error -62
usb 3-1: device descriptor read/64, error -62
usb 3-1: new full speed USB device using ohci_hcd and address 6
usb 3-1: device not accepting address 6, error -62
usb 3-1: new full speed USB device using ohci_hcd and address 7
usb 3-1: device not accepting address 7, error -71
Yup there is trouble alright, check the cable and try connecting the hub to a port on the motherboard, not one on your case (sometimes things don't work so well when connected to the case usb ports)
R00KIE
Tm90aGluZyB0byBzZWUgaGVyZSwgbW92ZSBhbG9uZy4K
Offline