You are not logged in.

#1 2004-11-18 10:23:59

Legout
Member
From: Wuerburg/germany
Registered: 2004-01-19
Posts: 292

Wlan won´t work since last update

Hi since my last pacman -Syu i can´t use my Wlan. It loads the modul without any errors. But when i drop the "Wlan-button" my computer freezes!!!

I also changed from devfs to udev!

Any Ideas??

Offline

#2 2004-11-18 10:47:11

cactus
Taco Eater
From: t͈̫̹ͨa͖͕͎̱͈ͨ͆ć̥̖̝o̫̫̼s͈̭̱̞͍̃!̰
Registered: 2004-05-25
Posts: 4,615
Website

Re: Wlan won´t work since last update

hmm...likely the udev thing is the issue.


"Be conservative in what you send; be liberal in what you accept." -- Postel's Law
"tacos" -- Cactus' Law
"t̥͍͎̪̪͗a̴̻̩͈͚ͨc̠o̩̙͈ͫͅs͙͎̙͊ ͔͇̫̜t͎̳̀a̜̞̗ͩc̗͍͚o̲̯̿s̖̣̤̙͌ ̖̜̈ț̰̫͓ạ̪͖̳c̲͎͕̰̯̃̈o͉ͅs̪ͪ ̜̻̖̜͕" -- -̖͚̫̙̓-̺̠͇ͤ̃ ̜̪̜ͯZ͔̗̭̞ͪA̝͈̙͖̩L͉̠̺͓G̙̞̦͖O̳̗͍

Offline

#3 2004-11-18 16:19:50

phrakture
Arch Overlord
From: behind you
Registered: 2003-10-29
Posts: 7,879
Website

Re: Wlan won´t work since last update

Legout wrote:

Hi since my last pacman -Syu i can´t use my Wlan. It loads the modul without any errors. But when i drop the "Wlan-button" my computer freezes!!!

I also changed from devfs to udev!

Any Ideas??

this happens on alot of laptops - just dont use the button, it should work fine

Offline

#4 2004-11-18 16:36:04

Legout
Member
From: Wuerburg/germany
Registered: 2004-01-19
Posts: 292

Re: Wlan won´t work since last update

I downgrades the ipw2200-modul and now it works well again.
Are there any important changes between the old and the new Wlandriver??

Offline

#5 2004-11-18 20:23:57

Hum
Member
Registered: 2004-06-13
Posts: 46

Re: Wlan won´t work since last update

Nov 10 2004  Changes in 0.13

    * Modified SW/HW rf_kill interaction functionality. See README.ipw2200 for details on current usage.
    * Fixed #239: iwconfig eth1 rts off/auto not supported
    * Fixed problem with not being able to associate with non-broadcast ESSID APs
    * Changed default temporal timeout for scan age to 15s
    * Changed MAC2STR and MACSTR to MAC_FMT and MAC_ARG
    * Fixed problem with scan results not expiring
    * Fixed a bug in ad-hoc support (#295) that prevented the creation of a new ad-hoc network
    * Reduced interval of scan requests to 1/10th second (vs. 5 seconds)
    * Modified scan logic to alternate between directed and active scanning when an ESSID is defined. This should improve AP to AP roaming via ESSID selection.
    * Increased dwell time on directed scans to 100ms from 20ms
    * Fixed fragmentation for both wep and with no encryption
    * Fixed wireless stats reporting to indicate that the noise level is invalid. This version of the firmware does not provide noise statistics.
    * Fixed a bug that prevented 'iwpriv ethX set_mode N' from working correctly

Offline

Board footer

Powered by FluxBB