You are not logged in.
Hello all
I got really strange problem with internet connection i got rouater (Pentagram Cerbus) and motherboard like in topic name.
I got 3 computers connected to router and 2 are on Windows and one (my) is Archlinux.
I connected cable from router to my motherboard (network card is default in motherboard) and green neon on motherboard is not light (there's no signal) on router my comp Lan* is blinking fast other computers not.
Really thank you for help.
Last edited by SpeedVin (2009-07-05 16:34:37)
Shell Scripter | C/C++/Python/Java Coder | ZSH
Offline
If the LED is not lit, it means the interface is down, bring it up by:
# ifconfig eth0 up
If you have two on board, bring up the other as well:
# ifconfig eth1 up
check for links:
# pacman -S ethtool
# ethtool eth0
# ethtool eth1
edit: lool.. I offered pacman -S, while you dont have a net
Last edited by daf666 (2009-07-03 19:26:39)
Offline
Hello thanks for answer , but i typed ifconfig eth0 up first time it said eht0 link down next time it's don't say nothing and i don't have net and LED is not lit
Shell Scripter | C/C++/Python/Java Coder | ZSH
Offline
Check if the cable is ok (try another one for start, if you don't have tools for checking it).
In love I believe and in Linux I trust
Offline
Cable is working good ,becouse I was try another cables and same situation.
Shell Scripter | C/C++/Python/Java Coder | ZSH
Offline
Strange. Have you checked that your integrated network card is enabled in BIOS? As far as I know your motherboard has a Gigabit ethernet from Realtek, which is supported for sure by the Linux kernel.
In love I believe and in Linux I trust
Offline
Yes card was waorking but some day just this is begin
Card is enabled in bios
Last edited by SpeedVin (2009-07-03 19:23:21)
Shell Scripter | C/C++/Python/Java Coder | ZSH
Offline
What does
ifconfig -a
says?
In love I believe and in Linux I trust
Offline
I got two interfaces eth0 and lo just like before.
I think it's hardware problem i will go to service
But thank you for help
Shell Scripter | C/C++/Python/Java Coder | ZSH
Offline
Just like I said before it's my integrated network card becouse i got now new network card and network works even better but what the diffreces about module 8139too and r8169 i know that 8139too is lighter but what dirver are newer?
Shell Scripter | C/C++/Python/Java Coder | ZSH
Offline
The module r8169 is for the Gigabit NICs from Realtek, 8139too and 8139cp is for different revisions of the 100Mbit NICs.
Last edited by ckristi (2009-07-09 17:23:34)
In love I believe and in Linux I trust
Offline