You are not logged in.

#1 2009-07-06 10:34:18

gejr
Member
Registered: 2007-05-23
Posts: 92

No sound after last pacman -Syu..possibly kernel-related

Since I did a pacman -Syu a week ago, I have no sound on my desktop system. I have two soundcards, one PCI and one onboard card and I suspect this to have something to do with it. I have a lot more controls in alsamixer (see picture below) than I used to have, but I can't remember exactly what has changed.

Any tips what I may try to fix things? I've tried putting the cable in both cards, adjusting the levels/muting controls in alsamixer, but no success.

I don't get any error messages, everything seems to be playing fine, but I simply don't hear anything.


Here's some more info. Let me know if there's anything more I should add.

[root@box ~]# uname -r
2.6.30-ARCH
[root@box ~]# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: CK804 [NVidia CK804], device 0: Intel ICH [NVidia CK804]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: CK804 [NVidia CK804], device 2: Intel ICH - IEC958 [NVidia CK804 - IEC958]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: CMI8738 [C-Media CMI8738], device 0: CMI8738-MC6 [C-Media PCI DAC/ADC]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: CMI8738 [C-Media CMI8738], device 1: CMI8738-MC6 [C-Media PCI 2nd DAC]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: CMI8738 [C-Media CMI8738], device 2: CMI8738-MC6 [C-Media PCI IEC958]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
[root@box ~]# cat /proc/asound/cards
 0 [CK804          ]: NFORCE - NVidia CK804
                      NVidia CK804 with ALC850 at irq 22
 1 [CMI8738        ]: CMI8738-MC6 - C-Media CMI8738
                      C-Media CMI8738 (model 55) at 0x9c00, irq 16

Image of my alsamixer

Offline

#2 2009-07-06 10:52:36

gejr
Member
Registered: 2007-05-23
Posts: 92

Re: No sound after last pacman -Syu..possibly kernel-related

I found this in another post:

[root@box ~]# aplay -D default:CARD=CMI8738 /usr/share/sounds/alsa/Front_Center.wav

It plays beautifully, so now I know I need to set this card as default. I can't figure out how to do this though. I guess I need to disable the other one somehow.

Offline

#3 2009-07-06 10:59:04

gejr
Member
Registered: 2007-05-23
Posts: 92

Re: No sound after last pacman -Syu..possibly kernel-related

I solved it by adding options snd_intel8x0 index=2 to /etc/modprobe.d/50-sound.conf

snd_intel8x0 was found by running cat /proc/asound/modules

In case anyone has the same trouble smile

Offline

#4 2009-07-07 08:02:41

cscorley
Member
Registered: 2009-07-07
Posts: 2

Re: No sound after last pacman -Syu..possibly kernel-related

I'm actually having a similiar problem since the 2.6.30 kernel, except alsa doesn't even see my CMI8788 card.  If I revert back to 2.6.29, everything is peachy again of course.  Tried redoing alsaconf, but that doesn't help any since alsactl can't even find the card.

# cat /proc/asound/cards 
--- no soundcards ---
# lspci
00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
00:01.2 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor (rev a2)
00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
00:02.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1)
00:04.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1)
00:04.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1)
00:06.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] IDE (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:09.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) (rev a2)
00:10.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1)
00:12.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1)
00:13.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:14.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control


01:08.0 Multimedia audio controller: C-Media Electronics Inc CMI8788 [Oxygen HD Audio]


02:00.0 VGA compatible controller: nVidia Corporation G94 [GeForce 9600 GT] (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
# lsmod
Module                  Size  Used by
ipv6                  335968  36 
fuse                   70032  2 
snd_seq_dummy           3540  0 
snd_seq_oss            36224  0 
snd_seq_midi_event      8592  1 snd_seq_oss
snd_seq                64640  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_virtuoso           16996  0 


snd_oxygen              9092  0 


snd_pcm_oss            47328  0 
snd_mixer_oss          20976  1 snd_pcm_oss
snd_hifier              6340  0 


snd_oxygen_lib         38256  3 snd_virtuoso,snd_oxygen,snd_hifier


snd_pcm                90808  3 snd_oxygen,snd_pcm_oss,snd_oxygen_lib
snd_timer              25344  2 snd_seq,snd_pcm
snd_page_alloc         10752  1 snd_pcm
snd_mpu401_uart         9264  1 snd_oxygen_lib
snd_rawmidi            26560  1 snd_mpu401_uart
snd_seq_device          8324  4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
snd                    76712  13 snd_seq_oss,snd_seq,snd_virtuoso,snd_oxygen,snd_pcm_oss,snd_mixer_oss,snd_hifier,snd_oxygen_lib,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
usbhid                 47584  0 
hid                    52512  1 usbhid
sg                     33792  0 
soundcore               8576  1 snd
psmouse                60404  0 
nvidia              10273544  26 
r8169                  41332  0 
mii                     5680  1 r8169
serio_raw               7188  0 
ppdev                   9336  0 
k8temp                  5712  0 
lp                     12676  0 
pcspkr                  3120  0 
i2c_nforce2             8344  0 
i2c_core               26816  2 nvidia,i2c_nforce2
wmi                     7968  0 
parport_pc             42760  1 
parport                39376  3 ppdev,lp,parport_pc
thermal                17712  0 
evdev                  12928  4 
processor              42032  0 
fan                     5656  0 
button                  7216  0 
battery                14072  0 
ac                      5720  0 
rtc_cmos               13592  0 
rtc_core               22212  1 rtc_cmos
rtc_lib                 3120  1 rtc_core
ext3                  151392  6 
jbd                    58776  1 ext3
mbcache                 8980  1 ext3
ohci_hcd               27020  0 
sr_mod                 19460  0 
cdrom                  41320  1 sr_mod
sd_mod                 30696  12 
ehci_hcd               40636  0 
usbcore               178992  4 usbhid,ohci_hcd,ehci_hcd
ahci                   40992  6 
ata_generic             6164  0 
pata_amd               15540  2 
pata_acpi               5744  0 
libata                192012  4 ahci,ata_generic,pata_amd,pata_acpi
scsi_mod              131480  4 sg,sr_mod,sd_mod,libata

Last edited by cscorley (2009-07-07 08:05:14)

Offline

#5 2009-07-07 10:58:47

Speedx
Member
Registered: 2009-05-22
Posts: 17

Re: No sound after last pacman -Syu..possibly kernel-related

I have the same problem.
I'm using Arch + kdemod-minimal. My audio card is Intel 82801G(ICH7) High Definition Audio.
After I update my Arch from 2.6.28 to 2.6.30, my kdemod-minimal show that

Notification from Phonon : KDE's Multime...
The audio playback device HDA Intel (CONEXANT Analog) does not work.
Failing back to.

However, I can use smplayer playing music and vedio with no sound.

Last edited by Speedx (2009-07-07 11:18:36)

Offline

Board footer

Powered by FluxBB