Tremulous Servers not showing up

knopper92 · 2009-09-04 22:30:33

(I wasn't sure if this should go in "network" or "games", so move it if necessary)

I've been having a problem with gettig servers to show up in tremulous. Everytime I click "get new list" It says "getting info for -1 servers". Notice the "-1", that number should be ABOVE zero. I've looked at the my router configuration and everything is fine. Nothing is being blocked.

To test to see if it was something to do with a local configuration that was causing the problem, I booted an ubuntu cd and installed tremulous using that, and guess what? It worked perfect.

So now that leaves me knowing that it has something to do with my network configuration.

Could someone help me out?

:: /etc/hosts

#
# /etc/hosts: static lookup table for host names
#
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost
# End of file

:: /etc/rc.conf network section

# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
#
HOSTNAME="knopper67-arch"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
#
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
#
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#
eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
#
gateway="default gw 192.168.1.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network.d
#
# This now requires the netcfg package
#
#NETWORKS=(main)

EDIT: Added config files

Last edited by knopper92 (2009-09-04 22:52:34)

Stythys · 2009-09-04 23:10:29

are you sure, the "source" option is set to internet, and not local or favorites?

knopper92 · 2009-09-04 23:56:54

Stythys wrote:

are you sure, the "source" option is set to internet, and not local or favorites?

No, it isn't.

Last edited by knopper92 (2009-09-04 23:57:08)

djszapi · 2009-09-05 06:22:55

Hello knopper92!

Do you the desired driver ? What's the error output if you try to configure it from console ?

Arch Linux

#1 2009-09-04 22:30:33

Tremulous Servers not showing up

#2 2009-09-04 23:10:29

Re: Tremulous Servers not showing up

#3 2009-09-04 23:56:54

Re: Tremulous Servers not showing up

#4 2009-09-05 06:22:55

Re: Tremulous Servers not showing up

Board footer