[Solved]D-bus problem's after upgrade hal to 5.13 and xorg-server.

SpeedVin · 2009-08-07 08:15:54

Hello
Toaday I upgraded my system to following packages.
startx and I got freeze
Hal restart fail.
Dbus restart.
Fail.
Error:

Failed to start message bus: Error in file /etc/dbus-1/system.d/xorg-server.conf collumn 1 line 0 elemnt not found

I seen that file and it's empty
Reinstalling dbus don't help.
User are in group's dbus and hal
Thanks for help

Last edited by SpeedVin (2009-08-07 08:54:36)

SpeedVin · 2009-08-07 08:47:56

I just moved this file and hal and dbus working but still I got freeze

SpeedVin · 2009-08-07 08:53:28

Problem Solved I disable hotplugging and my mouse working .

ghostHack · 2009-08-07 18:32:03

That file should not be empty, try re-installing the xorg-server package

[user@masaq ~]$ cat /etc/dbus-1/system.d/xorg-server.conf
<!DOCTYPE busconfig PUBLIC
 "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
 "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>
        <policy context="default">
                <allow own="org.x.config.display0"/>
                <allow send_destination="org.x.config.display0"/>
                <allow send_interface="org.x.config.display0"/>
                <allow own="org.x.config.display1"/>
                <allow send_destination="org.x.config.display1"/>
                <allow send_interface="org.x.config.display1"/>
        </policy>
</busconfig>
[user@masaq ~]$ pacman -Qo /etc/dbus-1/system.d/xorg-server.conf
/etc/dbus-1/system.d/xorg-server.conf is owned by xorg-server 1.6.3-2

SpeedVin · 2009-08-07 19:41:45

ghostHack wrote:

That file should not be empty, try re-installing the xorg-server package

[user@masaq ~]$ cat /etc/dbus-1/system.d/xorg-server.conf
<!DOCTYPE busconfig PUBLIC
 "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
 "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>
        <policy context="default">
                <allow own="org.x.config.display0"/>
                <allow send_destination="org.x.config.display0"/>
                <allow send_interface="org.x.config.display0"/>
                <allow own="org.x.config.display1"/>
                <allow send_destination="org.x.config.display1"/>
                <allow send_interface="org.x.config.display1"/>
        </policy>
</busconfig>
[user@masaq ~]$ pacman -Qo /etc/dbus-1/system.d/xorg-server.conf
/etc/dbus-1/system.d/xorg-server.conf is owned by xorg-server 1.6.3-2

Now after try worikng xorg-server file is not empty there are the same config as you posted

Last edited by SpeedVin (2009-08-07 19:43:46)

mateusz.f · 2009-08-26 06:37:02

That's not solved for me .

I reinstalled xorg, xorg-server and hal (using -Rd and -Sf). But when I do then running startx doesn't do *anything*. The command just starts and ends. There are no logs. X logs in /var/log are empty.

Anyone had same problem and solved it?

SpeedVin · 2009-08-26 07:14:14

mateusz.f wrote:

That's not solved for me .
I reinstalled xorg, xorg-server and hal (using -Rd and -Sf). But when I do then running startx doesn't do *anything*. The command just starts and ends. There are no logs. X logs in /var/log are empty.
Anyone had same problem and solved it?

Did you disable hotplugging?
Did your user are in hal and dbus groups?
Hal and dbus are running fine.
If you don't know try cat /var/run/daemons .

Last edited by SpeedVin (2009-08-26 07:14:50)

mateusz.f · 2009-08-26 07:17:49

I didn't disable hotplugging. Maybe with hotplugging off it would work, but I thought that the point is to make it work with it.

Dbus was previously failing because of xorg-server.conf emptiness. But now when I have those two files contents they seem to start withot problems. And I'm quite sure dbus is working as wicd is too.

No error messages from hal on start.

mateusz.f · 2009-09-12 12:57:32

After upgrading to new dbus or xorg (I'm not sure), the problem is solved finally also for me.

Posting from my new Arch system

Arch Linux

#1 2009-08-07 08:15:54

[Solved]D-bus problem's after upgrade hal to 5.13 and xorg-server.

#2 2009-08-07 08:47:56

Re: [Solved]D-bus problem's after upgrade hal to 5.13 and xorg-server.

#3 2009-08-07 08:53:28

Re: [Solved]D-bus problem's after upgrade hal to 5.13 and xorg-server.

#4 2009-08-07 18:32:03

Re: [Solved]D-bus problem's after upgrade hal to 5.13 and xorg-server.

#5 2009-08-07 19:41:45

Re: [Solved]D-bus problem's after upgrade hal to 5.13 and xorg-server.

#6 2009-08-26 06:37:02

Re: [Solved]D-bus problem's after upgrade hal to 5.13 and xorg-server.

#7 2009-08-26 07:14:14

Re: [Solved]D-bus problem's after upgrade hal to 5.13 and xorg-server.

#8 2009-08-26 07:17:49

Re: [Solved]D-bus problem's after upgrade hal to 5.13 and xorg-server.

#9 2009-09-12 12:57:32

Re: [Solved]D-bus problem's after upgrade hal to 5.13 and xorg-server.

Board footer