You are not logged in.

Pages: 1

#1 2009-09-23 06:15:18

ugaciaka
Member
From: Italy
Registered: 2008-07-06
Posts: 140
Website

SATA DVD: arch see only IDE!

Hi,

I have a SATA CD/DVDW but arch see only IDE but on the same computer Ubuntu 8.10 and windows xp detect it correctly as SATA. The drive is:

 Model=TSSTcorpCD/DVDW SH-S182M, FwRev=SB03, SerialNo=
 Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
 RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
 BuffType=unknown, BuffSize=unknown, MaxMultSect=0
 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
 IORDY=on/off, tPIO={min:227,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4 
 DMA modes:  mdma0 mdma1 mdma2 
 UDMA modes: udma0 udma1 *udma2 
 AdvancedPM=no

 * signifies the current active mode

The MotherBoard is: ASUS M2N-MX.

I can mount DVD video, CD audio. but dmesg:

ide-cd: hda: tray open
end_request: I/O error, dev hda, sector 270352
Buffer I/O error on device hda, logical block 67588
ide-cd: hda: tray open
end_request: I/O error, dev hda, sector 270352
Buffer I/O error on device hda, logical block 67588
ide-cd: hda: tray open
end_request: I/O error, dev hda, sector 270352
Buffer I/O error on device hda, logical block 67588
ide-cd: hda: tray open
end_request: I/O error, dev hda, sector 270352
Buffer I/O error on device hda, logical block 67588
ide-cd: hda: tray open
end_request: I/O error, dev hda, sector 270352
Buffer I/O error on device hda, logical block 67588
ide-cd: hda: tray open
end_request: I/O error, dev hda, sector 270352
Buffer I/O error on device hda, logical block 67588
ide-cd: hda: tray open
end_request: I/O error, dev hda, sector 270288
Buffer I/O error on device hda, logical block 67572
Buffer I/O error on device hda, logical block 67573
ide-cd: hda: tray open
end_request: I/O error, dev hda, sector 270344
Buffer I/O error on device hda, logical block 67586
ide-cd: hda: tray open
end_request: I/O error, dev hda, sector 270352
ide-cd: hda: tray open
end_request: I/O error, dev hda, sector 270352
ide-cd: hda: tray open
end_request: I/O error, dev hda, sector 528
ide-cd: hda: tray open
end_request: I/O error, dev hda, sector 528
ide-cd: hda: tray open
end_request: I/O error, dev hda, sector 512
cdrom: hda: mrw address space DMA selected
cdrom: hda: mrw address space DMA selected
UDF-fs: Partition marked readonly; forcing readonly mount
UDF-fs INFO UDF: Mounting volume 'CDROM', timestamp 2008/06/04 17:07 (1078)

But I can't mount DVD/CD with data. Dmesg:

hda: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
hda: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
hda: possibly failed opcode: 0xa0
hda: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
hda: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
hda: possibly failed opcode: 0xa0
hda: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
hda: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
hda: possibly failed opcode: 0xa0
hda: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
hda: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
hda: possibly failed opcode: 0xa0
hda: DMA disabled
hda: ATAPI reset complete

lsmod:

Module                  Size  Used by
rfcomm                 46448  4 
bridge                 63056  0 
stp                     2804  1 bridge
llc                     7024  2 bridge,stp
bnep                   13840  2 
sco                    13428  2 
l2cap                  28016  6 rfcomm,bnep
cpufreq_ondemand        9256  1 
it87                   28008  0 
hwmon_vid               3824  1 it87
ide_cd_mod             33784  0 
cdrom                  41288  1 ide_cd_mod
ata_generic             6164  0 
pata_acpi               5744  0 
pata_amd               15540  0 
snd_hda_codec_analog    83184  1 
ide_pci_generic         5172  0 
snd_seq_dummy           3540  0 
snd_seq_oss            36224  0 
snd_seq_midi_event      8592  1 snd_seq_oss
snd_seq                64640  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          8324  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss            47328  0 
snd_mixer_oss          20976  2 snd_pcm_oss
ohci_hcd               27052  0 
ppdev                   9304  0 
thermal                17712  0 
snd_hda_intel          31208  2 
snd_hda_codec          82096  2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep               9976  1 snd_hda_codec
snd_pcm                90776  3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer              25344  2 snd_seq,snd_pcm
snd                    76744  13 snd_hda_codec_analog,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore               8576  2 snd
snd_page_alloc         10784  2 snd_hda_intel,snd_pcm
parport_pc             42792  1 
nvidia              10324328  26 
fan                     5656  0 
lp                     12676  0 
parport                39344  3 ppdev,parport_pc,lp
psmouse                60404  0 
battery                14072  0 
i2c_nforce2             8344  0 
i2c_core               26816  2 nvidia,i2c_nforce2
amd74xx                 7352  0 
asus_atk0110            9936  0 
ehci_hcd               41180  0 
usbcore               179504  3 ohci_hcd,ehci_hcd
ide_core              118464  3 ide_cd_mod,ide_pci_generic,amd74xx
button                  7216  0 
sg                     33824  0 
evdev                  12928  8 
forcedeth              63612  0 
ac                      5720  0 
serio_raw               7188  0 
k8temp                  5712  0 
powernow_k8            15444  1 
freq_table              4528  2 cpufreq_ondemand,powernow_k8
processor              42128  1 powernow_k8
bluetooth              65636  6 rfcomm,bnep,sco,l2cap
rtc_cmos               13592  0 
rtc_core               22212  1 rtc_cmos
rtc_lib                 3120  1 rtc_core
ext4                  256304  3 
mbcache                 8980  1 ext4
jbd2                   69088  1 ext4
crc16                   2096  1 ext4
sd_mod                 30696  5 
floppy                 66280  0 
sata_nv                29208  5 
libata                192492  4 ata_generic,pata_acpi,pata_amd,sata_nv
scsi_mod              131736  3 sg,sd_mod,libata

mkinitcpio.conf is:

HOOKS="base udev autodetect sata filesystems"

I tried enabling the DMA with hdparm-d1 /ev/hda but it did not work.

I tried disabling ide: http://www.opensourcery.com/blog/chad-g … ata-laptop. But it did not work.

I tried SATA DVD player on another pc with arch: arch see player... SATA!!!

Conclusion:     
The problem is that arch on that computer sees the drive as IDE instead of SATA. While on another PC everything is fine. How can I solve this problem?

I have never bought on ebay, the macbook I do not like, I do not need facebook or myspace or secondlife
I am not a nerd or lamer or troll or geek or hacker or cracker
and I have never voted to elect berlusconi

Offline

#2 2009-09-28 06:12:41

ugaciaka
Member
From: Italy
Registered: 2008-07-06
Posts: 140
Website

Re: SATA DVD: arch see only IDE!

up

I have never bought on ebay, the macbook I do not like, I do not need facebook or myspace or secondlife
I am not a nerd or lamer or troll or geek or hacker or cracker
and I have never voted to elect berlusconi

Offline

#3 2009-09-28 10:24:07

EVRAMP
Member
From: Czech Republic
Registered: 2008-10-03
Posts: 173
Website

Re: SATA DVD: arch see only IDE!

Try HOOKS="base udev autodetect scsi sata filesystems".

Offline

#4 2009-09-30 11:55:26

ugaciaka
Member
From: Italy
Registered: 2008-07-06
Posts: 140
Website

Re: SATA DVD: arch see only IDE!

EVRAMP wrote:

Try HOOKS="base udev autodetect scsi sata filesystems".

never.... sad

I have never bought on ebay, the macbook I do not like, I do not need facebook or myspace or secondlife
I am not a nerd or lamer or troll or geek or hacker or cracker
and I have never voted to elect berlusconi

Offline

#5 2009-10-08 05:44:06

jspaces
Member
From: Canada
Registered: 2009-04-16
Posts: 21

Re: SATA DVD: arch see only IDE!

ugaciaka wrote:
EVRAMP wrote:

Try HOOKS="base udev autodetect scsi sata filesystems".

never.... sad

I do not understand the "never" comment.

On my Asus M2N-SLI deluxe with a sata LG GH22LS50 DVD burner is listed as /dev/sr0.
I have the scsi hook just like EVRAMP has suggested to you.
Lshal shows the burner listed as a scsi device which shows that scsi hook is required (or scsi support has to be built in to a customized kernel if you do not want to load the module).
My sata dvd burner just works, no fuss or muss. wink

# hwdetect --hooks
HOOKS="base udev autodetect scsi sata filesystems"
# lshal | grep -A 3 -B 3 -e "scsi.model = 'DVDRAM GH22LS50'"
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 5  (0x5)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'DVDRAM GH22LS50'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'cdrom'  (string)
  scsi.vendor = 'HL-DT-ST'  (string)

Knowledge is a beam of light in which humans can only see the reflection.

Offline

#6 2009-10-09 18:48:38

ugaciaka
Member
From: Italy
Registered: 2008-07-06
Posts: 140
Website

Re: SATA DVD: arch see only IDE!

not work. I tried sad

I have never bought on ebay, the macbook I do not like, I do not need facebook or myspace or secondlife
I am not a nerd or lamer or troll or geek or hacker or cracker
and I have never voted to elect berlusconi

Offline

#7 2009-10-11 17:10:14

EVRAMP
Member
From: Czech Republic
Registered: 2008-10-03
Posts: 173
Website

Re: SATA DVD: arch see only IDE!

Have you run mkinicpio after editing? If so, try also fallback image.

Offline

#8 2009-10-11 17:12:45

ugaciaka
Member
From: Italy
Registered: 2008-07-06
Posts: 140
Website

Re: SATA DVD: arch see only IDE!

EVRAMP wrote:

Have you run mkinicpio after editing? If so, try also fallback image.

sure but not work.

Now I have linux 2.6.32.3 but the problem persisting

I have never bought on ebay, the macbook I do not like, I do not need facebook or myspace or secondlife
I am not a nerd or lamer or troll or geek or hacker or cracker
and I have never voted to elect berlusconi

Offline

#9 2010-01-11 19:58:55

insomniak4700
Member
Registered: 2009-11-18
Posts: 15

Re: SATA DVD: arch see only IDE!

I have a very strange issue.. i've tried this on my system, and my BD-R drive which kept dissapearing when accessed now works fine.
however, whenever I eject something the tray goes right back in. Anybody ever see a strange behavior like this?

thanks

Offline

Pages: 1

Board footer

Powered by FluxBB