You are not logged in.
Pages: 1
So I don't know if this is an Arch problem or a shitty cable, but 95% of the time when I try to start my network dhcpcd times out. I then try to start it manually several times after wiggling my cable around and after about 5 or 10 tries it finally picks up an IP. ethtool always says that I have a link and the light by the port is always on.
Offline
what's your nic? does dmesg show you something like 'Interrupt #(number) lost' or 'Interrupt #(number) ignored'?
And why don't you start checking the issue by it's most obvious solution? If you suspect of the cable... why don't you try another?
They say that if you play a Win cd backward you hear satanic messages. That's nothing! 'cause if you play it forwards, it installs windows.
Offline
"dmesg | grep Interrupt" returned:
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
I don't own another cable, I would have to go out and get one so it is not a preferable option. I didn't used to have this problem. It would happen once a month or something, but not everyday.
Last edited by Dethredic (2009-09-15 16:38:17)
Offline
Offline
anyone?
It may be worth trying to increase the timeout length in dhcpcd.conf. From the man on dhcpcd.conf:
timeout seconds
The default timeout for waiting for a DHCP response is 30 seconds which may be too long or too short and can
be changed here.
I seriously doubt that your DHCP server needs more than 30s to resolve an IP, but I suppose if you need to workaround faulty connections then this may help.
Offline
Sorry I couldn't answer before. I have been very busy.
I don't know what might be your problem. Probably a faulty router/gateway/modem/whatsoever. I've a dlink flashed with ddwrt and when I have dhcp issues, I just reset it. That's all.
p.s. I insist, you didn't provide your network card brand.
They say that if you play a Win cd backward you hear satanic messages. That's nothing! 'cause if you play it forwards, it installs windows.
Offline
Sorry, I use the built in port on my P5Q motherboard. This just never happened in the last 6 months. I will get a new Ethernet cord when I go home in a week.
Last edited by Dethredic (2009-09-21 13:59:27)
Offline
Offline
sorry. I've no idea...
They say that if you play a Win cd backward you hear satanic messages. That's nothing! 'cause if you play it forwards, it installs windows.
Offline
Sorta glad to know it's not just me having this issue...
I actually resorted to a twice-daily root cron job that does:
killall dhcpcd; dhcpcd eth0
--ugly fix, but seems to work.
Offline
if that were the case, why you don't just change the dhcp client? (pump or dhclient might be a viable alternative)
They say that if you play a Win cd backward you hear satanic messages. That's nothing! 'cause if you play it forwards, it installs windows.
Offline
I'm having problems getting a IP when connected to my office's Gigabit switch, if I'm connected to another 100mbps switch it works everytime. Also it does not matter if I use networkmanager or dhclient.
So maybe it is your switch?
Kind regards, enrique
Offline
never trust a toad...
::Grateful ArchDonor::
::Grateful Wikipedia Donor::
Offline
Pages: 1