Arch Linux

mits

Member

From: Bucharest/Romania

Registered: 2008-01-10

Posts: 129

Dell 1555 burn iso's error [SOLVED]

I bought a Dell 1555 and I have a big problem with burning cd/dvd (k3b, xfburn, brasero).
Burning process is starting and it is stopping very quickly (cd/dvd is broken after that).
In xfburn I got these error:

Failure: SCSI error on write(272,16): [5 21 02]  Invalid address

My DVD drive:(kde info center)

Host: scsi0 Channel: 00 Id: 00 Lun: 00 
  Vendor: ATA      Model: WDC WD5000BEVT-7 Rev: 01.0
  Type:   Direct-Access                    ANSI  SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: HL-DT-ST Model: DVD+-RW GA11N    Rev: A101
  Type:   CD-ROM                           ANSI  SCSI revision: 05
Host: scsi6 Channel: 00 Id: 00 Lun: 00
  Vendor: CDEmu    Model: Virt. CD/DVD-ROM Rev: 1.10
  Type:   CD-ROM                           ANSI  SCSI revision: 00
Host: scsi7 Channel: 00 Id: 00 Lun: 00
  Vendor: WDC WD10 Model: EADS-00L5B1      Rev: 1A01
  Type:   Direct-Access                    ANSI  SCSI revision: 02

Please some help!

Last edited by mits (2010-05-24 19:05:13)

MadTux

Member

Registered: 2009-09-20

Posts: 553

Re: Dell 1555 burn iso's error [SOLVED]

Have you thought about that your burner may have a defect? I have had bad experiences with brasero not being able to burn cd/dvd, but it sounds strange that three burners have problems. As far as I know, k3b is one of the best burners. Did you try with lower burning speed, different media?

MadTux

Member

Registered: 2009-09-20

Posts: 553

Re: Dell 1555 burn iso's error [SOLVED]

You may look into the cd/dvd burning wiki. In the troubleshooting section, it describes the symptoms you are seeing and some possible workarounds.

http://wiki.archlinux.org/index.php/CD_ … ps#Brasero

mits

Member

From: Bucharest/Romania

Registered: 2008-01-10

Posts: 129

Re: Dell 1555 burn iso's error [SOLVED]

Have you thought about that your burner may have a defect? I have had bad experiences with brasero not being able to burn cd/dvd, but it sounds strange that three burners have problems. As far as I know, k3b is one of the best burners. Did you try with lower burning speed, different media?

In windows 7 works without a problem, so is not a hardware problem.

Last edited by mits (2009-12-11 20:55:02)

mits

Member

From: Bucharest/Romania

Registered: 2008-01-10

Posts: 129

Re: Dell 1555 burn iso's error [SOLVED]

I set permission for devices:

# chmod 777 /dev/dvd*
# chmod 777 /dev/cd*

Now it work with gnomebaker at 2x and dvd+ (Emtec), but don't work with DVD- (HP).
Any ideas?
Thank you anyway!

Last edited by mits (2009-12-11 22:19:12)

drgg

Member

Registered: 2009-12-20

Posts: 2

Re: Dell 1555 burn iso's error [SOLVED]

I have the same problems under sidux no cd burning and sometimes burning of DVD. Erasing CD-RW works.

Under  win7 burnings works.

Any solution yet?

mits

Member

From: Bucharest/Romania

Registered: 2008-01-10

Posts: 129

Re: Dell 1555 burn iso's error [SOLVED]

It seems that only dvd+ works for me (with 2x or auto speed).

Last edited by mits (2009-12-22 07:58:28)

zenlord

Member

From: Belgium

Registered: 2006-05-24

Posts: 1,223

Website

Re: Dell 1555 burn iso's error [SOLVED]

It could be just a matter of finding 'compatible' discs for your burner, but I have solved all my burning-problems by simply swapping cdrkit with cdrtools.

cdrtools is available in AUR. It contains roughly the same programs, but it is developed constantly and contains less bugs. cdrkit was a fork of cdrtools to get around some alleged licensing-problems.

drgg

Member

Registered: 2009-12-20

Posts: 2

Re: Dell 1555 burn iso's error [SOLVED]

Changing to cdrtools solved my problems for cd burning too.

Thanks for the tip

mits

Member

From: Bucharest/Romania

Registered: 2008-01-10

Posts: 129

Re: Dell 1555 burn iso's error [SOLVED]

I changed to cdrtools and no Cd-/Dvd- don't work too.

whorider

Member

From: Dallas, TX

Registered: 2009-09-22

Posts: 4

Re: Dell 1555 burn iso's error [SOLVED]

I had a similar problem with the Dell XPS M1340. I had recently updated the firmware for my DVDRW to the latest version (support for Win 7) , I couldn't burn anything in Arch (K3B, Nero, CLI), but could in Windows 7 (Nero). I downgraded it back to vA108 and it works again.

Looks like this is your model with firmware vA101: Vendor: HL-DT-ST Model: DVD+-RW GA11N    Rev: A101

I tried searching for an earlier firmware version for your model, but had no luck.

---

rc.conf

surfed

Member

From: Vienna Austria

Registered: 2009-10-30

Posts: 86

Re: Dell 1555 burn iso's error [SOLVED]

My xps 16 ships with this drive (HL-DT-ST Model: DVD+-RW GA11N) with Firmware A102 and burning is a no go for cd's and at speed is only 0.3x for dvd's.

surfed

Member

From: Vienna Austria

Registered: 2009-10-30

Posts: 86

Re: Dell 1555 burn iso's error [SOLVED]

never mind, post deleted for wrong content

Last edited by surfed (2010-05-24 19:11:53)

mits

Member

From: Bucharest/Romania

Registered: 2008-01-10

Posts: 129

Re: Dell 1555 burn iso's error [SOLVED]

I found these firmware http://files.rpc1.org/index.php?act=category&id=1821 and I downgrade my A101 firmware to that.
Now I can burn baby!
SOLVED! (So far)