You are not logged in.

#1 2009-12-11 15:28:07

mits
Member
From: Bucharest/Romania
Registered: 2008-01-10
Posts: 129

Dell 1555 burn iso's error [SOLVED]

I bought a Dell 1555 and I have a big problem with burning cd/dvd (k3b, xfburn, brasero).
Burning process is starting and it is stopping very quickly (cd/dvd is broken after that).
In xfburn I got these error:

Failure: SCSI error on write(272,16): [5 21 02]  Invalid address

My DVD drive:(kde info center)

Host: scsi0 Channel: 00 Id: 00 Lun: 00 
  Vendor: ATA      Model: WDC WD5000BEVT-7 Rev: 01.0
  Type:   Direct-Access                    ANSI  SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: HL-DT-ST Model: DVD+-RW GA11N    Rev: A101
  Type:   CD-ROM                           ANSI  SCSI revision: 05
Host: scsi6 Channel: 00 Id: 00 Lun: 00
  Vendor: CDEmu    Model: Virt. CD/DVD-ROM Rev: 1.10
  Type:   CD-ROM                           ANSI  SCSI revision: 00
Host: scsi7 Channel: 00 Id: 00 Lun: 00
  Vendor: WDC WD10 Model: EADS-00L5B1      Rev: 1A01
  Type:   Direct-Access                    ANSI  SCSI revision: 02

Please some help!

Last edited by mits (2010-05-24 19:05:13)

Offline

#2 2009-12-11 16:13:48

MadTux
Member
Registered: 2009-09-20
Posts: 553

Re: Dell 1555 burn iso's error [SOLVED]

Have you thought about that your burner may have a defect? I have had bad experiences with brasero not being able to burn cd/dvd, but it sounds strange that three burners have problems. As far as I know, k3b is one of the best burners. Did you try with lower burning speed, different media?

Offline

#3 2009-12-11 17:48:09

MadTux
Member
Registered: 2009-09-20
Posts: 553

Re: Dell 1555 burn iso's error [SOLVED]

You may look into the cd/dvd burning wiki. In the troubleshooting section, it describes the symptoms you are seeing and some possible workarounds.

http://wiki.archlinux.org/index.php/CD_ … ps#Brasero

Offline

#4 2009-12-11 20:54:44

mits
Member
From: Bucharest/Romania
Registered: 2008-01-10
Posts: 129

Re: Dell 1555 burn iso's error [SOLVED]

MadTux wrote:

Have you thought about that your burner may have a defect? I have had bad experiences with brasero not being able to burn cd/dvd, but it sounds strange that three burners have problems. As far as I know, k3b is one of the best burners. Did you try with lower burning speed, different media?

In windows 7 works without a problem, so is not a hardware problem.

Last edited by mits (2009-12-11 20:55:02)

Offline

#5 2009-12-11 21:13:51

mits
Member
From: Bucharest/Romania
Registered: 2008-01-10
Posts: 129

Re: Dell 1555 burn iso's error [SOLVED]

I set permission for devices:

# chmod 777 /dev/dvd*
# chmod 777 /dev/cd*

Now it work with gnomebaker at 2x and dvd+ (Emtec), but don't work with DVD- (HP).
Any ideas?
Thank you anyway!

Last edited by mits (2009-12-11 22:19:12)

Offline

#6 2009-12-20 16:52:48

drgg
Member
Registered: 2009-12-20
Posts: 2

Re: Dell 1555 burn iso's error [SOLVED]

I have the same problems under sidux no cd burning and sometimes burning of DVD. Erasing CD-RW works.

Under  win7 burnings works.

Any solution yet?

Offline

#7 2009-12-21 21:04:36

mits
Member
From: Bucharest/Romania
Registered: 2008-01-10
Posts: 129

Re: Dell 1555 burn iso's error [SOLVED]

It seems that only dvd+ works for me (with 2x or auto speed).

Last edited by mits (2009-12-22 07:58:28)

Offline

#8 2009-12-23 17:09:37

zenlord
Member
From: Belgium
Registered: 2006-05-24
Posts: 1,221
Website

Re: Dell 1555 burn iso's error [SOLVED]

It could be just a matter of finding 'compatible' discs for your burner, but I have solved all my burning-problems by simply swapping cdrkit with cdrtools.

cdrtools is available in AUR. It contains roughly the same programs, but it is developed constantly and contains less bugs. cdrkit was a fork of cdrtools to get around some alleged licensing-problems.

Offline

#9 2010-01-04 10:17:28

drgg
Member
Registered: 2009-12-20
Posts: 2

Re: Dell 1555 burn iso's error [SOLVED]

Changing to cdrtools solved my problems for cd burning too.

Thanks for the tip

Offline

#10 2010-01-08 14:53:12

mits
Member
From: Bucharest/Romania
Registered: 2008-01-10
Posts: 129

Re: Dell 1555 burn iso's error [SOLVED]

I changed to cdrtools and no Cd-/Dvd- don't work too.

Offline

#11 2010-01-20 18:03:06

whorider
Member
From: Dallas, TX
Registered: 2009-09-22
Posts: 4

Re: Dell 1555 burn iso's error [SOLVED]

I had a similar problem with the Dell XPS M1340. I had recently updated the firmware for my DVDRW to the latest version (support for Win 7) , I couldn't burn anything in Arch (K3B, Nero, CLI), but could in Windows 7 (Nero). I downgraded it back to vA108 and it works again.

Looks like this is your model with firmware vA101: Vendor: HL-DT-ST Model: DVD+-RW GA11N    Rev: A101

I tried searching for an earlier firmware version for your model, but had no luck.


rc.conf

Offline

#12 2010-01-22 07:20:15

surfed
Member
From: Vienna Austria
Registered: 2009-10-30
Posts: 86

Re: Dell 1555 burn iso's error [SOLVED]

My xps 16 ships with this drive (HL-DT-ST Model: DVD+-RW GA11N) with Firmware A102 and burning is a no go for cd's and at speed is only 0.3x for dvd's.

Offline

#13 2010-01-28 19:07:16

surfed
Member
From: Vienna Austria
Registered: 2009-10-30
Posts: 86

Re: Dell 1555 burn iso's error [SOLVED]

never mind, post deleted for wrong content

Last edited by surfed (2010-05-24 19:11:53)

Offline

#14 2010-05-24 19:04:43

mits
Member
From: Bucharest/Romania
Registered: 2008-01-10
Posts: 129

Re: Dell 1555 burn iso's error [SOLVED]

I found these firmware http://files.rpc1.org/index.php?act=category&id=1821 and I downgrade my A101 firmware to that.
Now I can burn baby!
SOLVED! (So far)

Offline

Board footer

Powered by FluxBB