The Arch Hurd Project

Barrucadu · 2010-01-17 22:08:55

Change HOST to x86_64-unknown-linux-gnu

apollokk · 2010-01-17 22:12:07

OK now?

HOST=x86_64-unknown-linux-gnu
TARGET=i586-pc-gnu

Barrucadu · 2010-01-17 22:12:29

Yes, that looks ok.

apollokk · 2010-01-17 22:20:35

make[3]: Entering directory `/mnt/data/hurd-project/build/cross-binutils-build/libiberty/testsuite'
make[3]: Nothing to be done for `install'.
make[3]: Leaving directory `/mnt/data/hurd-project/build/cross-binutils-build/libiberty/testsuite'
make[2]: Leaving directory `/mnt/data/hurd-project/build/cross-binutils-build/libiberty'
make[1]: Nothing to be done for `install-target'.
make[1]: Leaving directory `/mnt/data/hurd-project/build/cross-binutils-build'

It seems to be ok?

Last edited by apollokk (2010-01-17 22:20:52)

Barrucadu · 2010-01-17 22:21:37

Yes, libiberty fails, but binutils itself works.

Last edited by Barrucadu (2010-01-17 22:22:24)

apollokk · 2010-01-17 22:22:35

So it's OK. I'll stay to see ~2 more packages, then I'll leave it overnight and fall asleep

apollokk · 2010-01-17 22:25:16

gcc-g++ possible problem?

checking for C compiler default output file name... configure: error: in `/mnt/data/hurd-project/build/cross-gcc-build':
configure: error: C compiler cannot create executables
See `config.log' for more details.
make: *** No rule to make target `all-gcc'.  Stop.
make: *** No rule to make target `all-target-libgcc'.  Stop.

apollokk · 2010-01-17 22:26:26

A problem too?

checking for i586-pc-gnu-gcc... none
configure: error: could not find a compiler for the target you requested
make: *** No rule to make target `all'.  Stop.

apollokk · 2010-01-17 22:30:39

Again

checking for C compiler default output file name... configure: error: in `/mnt/data/hurd-project/build/cross-gcc-build':
configure: error: C compiler cannot create executables
See `config.log' for more details.
make: *** No rule to make target `all'.  Stop.
make: *** No rule to make target `install'.  Stop.
checking for i586-pc-gnu-gcc... no
checking for gcc... gcc
configure: WARNING: using cross tools not prefixed with host triplet
checking for suffix of object files... configure: error: in `/mnt/data/hurd-project/build/glibc-build':
configure: error: cannot compute suffix of object files: cannot compile
See `config.log' for more details.
make: *** No rule to make target `all'.  Stop.

apollokk · 2010-01-17 22:36:01

Yes, all failed

checking for i586-pc-gnu-gcc... i586-pc-gnu-gcc
checking for C compiler default output file name... 
configure: error: C compiler cannot create executables
See `config.log' for more details.
make: *** No rule to make target `install'.  Stop.

Barrucadu · 2010-01-17 22:37:06

Ah, that's why I set up a 32-bit chroot! It works on 32-bit Arch, but not on 64-bit. I haven't really investigated it yet.

apollokk · 2010-01-17 22:41:10

Hm ... can I try a 64bit chroot?

Barrucadu · 2010-01-17 22:43:15

You could… but the same thing would happen.

apollokk · 2010-01-17 22:45:00

Hm ... if I make a 32bit chroot and chroot hurd over there?

Can this happen?

Barrucadu · 2010-01-17 22:47:58

If you make a 32-bit chroot, enter it (making sure to run `linux32` so `uname -m` outputs "i686"), and try the cross-build in there, all should work.

apollokk · 2010-01-17 22:50:51

Hm, I'll see, cause I have a lot of chroots for the time being.

BTW: Blog-posted it http://rsync.wordpress.com/2010/01/18/a … it-system/

Last edited by apollokk (2010-01-17 22:52:00)

Barrucadu · 2010-01-17 23:48:00

apollokk wrote:

Hm, I'll see, cause I have a lot of chroots for the time being.

…are you sure we're talking about the same thing?
You should have no reason to have many chroots.

Last edited by Barrucadu (2010-01-17 23:48:16)

Barrucadu · 2010-01-18 00:12:41

xz-utils:

XZUTILS_VER=4.999.9beta

#!/bin/bash

cd $SOURCE_DIR
if [ ! -f xz-$XZUTILS_VER.tar.gz ]; then                                                                                                                                              
  wget http://tukaani.org/xz/xz-$XZUTILS_VER.tar.gz
fi

cd $BUILD_DIR
rm -rf xz-$XZUTILS_VER
tar -xf $SOURCE_DIR/xz-$XZUTILS_VER.tar.gz

rm -rf xz-utils-build
mkdir -p xz-utils-build
cd xz-utils-build

../xz-$XZUTILS_VER/configure \
    --host=$TARGET \
    --prefix= \
    --disable-static \
    --enable-dynamic \
    --disable-rpath

cd ../xz-$XZUTILS_VER
patch -p1 < $SOURCE_DIR/patches/xz-$XZUTILS_VER/crc32.patch
patch -p1 < $SOURCE_DIR/patches/xz-$XZUTILS_VER/crc64.patch
cd ../xz-utils-build

make DESTDIR=$HURD_DIR install

cd $ROOT

$SOURCE_DIR/patches/xz-$XZUTILS_VER/crc32.patch

--- ./src/liblzma/check/crc32_x86.S    2010-01-18 00:02:03.024138846 +0000
+++ ./src/liblzma/check/crc32_x86.S    2010-01-18 00:03:30.154971472 +0000
@@ -1,3 +1,5 @@
+
+
 /*
  * Speed-optimized CRC32 using slicing-by-eight algorithm
  *
@@ -67,20 +69,11 @@
  * Solaris assembler doesn't have .p2align, and Darwin uses .align
  * differently than GNU/Linux and Solaris.
  */
-#if defined(__MACH__) || defined(__MSDOS__)
-#    define ALIGN(pow2, abs) .align pow2
-#else
-#    define ALIGN(pow2, abs) .align abs
-#endif
+# define ALIGN(pow2, abs) .align abs
 
     .text
     .globl    LZMA_CRC32
 
-#if !defined(__MACH__) && !defined(_WIN32) && !defined(__CYGWIN__) \
-        && !defined(__MSDOS__)
-    .type    LZMA_CRC32, @function
-#endif
-
     ALIGN(4, 16)
 LZMA_CRC32:
     /*
@@ -119,12 +112,6 @@
         || (defined(_WIN32) || defined(__CYGWIN__))
     /* Not PIC */
     movl    $LZMA_CRC32_TABLE, %ebx
-#elif defined(__MACH__)
-    /* Mach-O */
-    call    .L_get_pc
-.L_pic:
-    leal    .L_lzma_crc32_table$non_lazy_ptr-.L_pic(%ebx), %ebx
-    movl    (%ebx), %ebx
 #else
     /* ELF */
     call    .L_get_pc
@@ -275,14 +262,7 @@
     ret
 #endif
 
-#if defined(__MACH__) && (defined(PIC) || defined(__PIC__))
-    /* Mach-O PIC */
-    .section __IMPORT,__pointers,non_lazy_symbol_pointers
-.L_lzma_crc32_table$non_lazy_ptr:
-    .indirect_symbol LZMA_CRC32_TABLE
-    .long 0
-
-#elif defined(_WIN32) || defined(__CYGWIN__)
+#if defined(_WIN32) || defined(__CYGWIN__)
 #    ifdef DLL_EXPORT
     /* This is equivalent of __declspec(dllexport). */
     .section .drectve
@@ -299,6 +279,6 @@
  * use __linux__ here, but I don't know a way to detect when
  * we are using GNU assembler.
  */
-#if defined(__ELF__) && defined(__linux__)
+#if defined(__ELF__)
     .section    .note.GNU-stack,"",@progbits
 #endif

$SOURCE_DIR/patches/xz-$XZUTILS_VER/crc64.patch

--- ./src/liblzma/check/crc64_x86.S    2010-01-18 00:05:55.928299092 +0000
+++ ./src/liblzma/check/crc64_x86.S    2010-01-18 00:06:43.170797635 +0000
@@ -57,11 +57,7 @@
  * Solaris assembler doesn't have .p2align, and Darwin uses .align
  * differently than GNU/Linux and Solaris.
  */
-#if defined(__MACH__) || defined(__MSDOS__)
-#    define ALIGN(pow2, abs) .align pow2
-#else
-#    define ALIGN(pow2, abs) .align abs
-#endif
+# define ALIGN(pow2, abs) .align abs
 
     .text
     .globl    LZMA_CRC64
@@ -110,12 +106,6 @@
         || (defined(_WIN32) || defined(__CYGWIN__))
     /* Not PIC */
     movl    $LZMA_CRC64_TABLE, %ebx
-#elif defined(__MACH__)
-    /* Mach-O */
-    call    .L_get_pc
-.L_pic:
-    leal    .L_lzma_crc64_table$non_lazy_ptr-.L_pic(%ebx), %ebx
-    movl    (%ebx), %ebx
 #else
     /* ELF */
     call    .L_get_pc
@@ -258,14 +248,7 @@
     ret
 #endif
 
-#if defined(__MACH__) && (defined(PIC) || defined(__PIC__))
-    /* Mach-O PIC */
-    .section __IMPORT,__pointers,non_lazy_symbol_pointers
-.L_lzma_crc64_table$non_lazy_ptr:
-    .indirect_symbol LZMA_CRC64_TABLE
-    .long 0
-
-#elif defined(_WIN32) || defined(__CYGWIN__)
+#if defined(_WIN32) || defined(__CYGWIN__)
 #    ifdef DLL_EXPORT
     /* This is equivalent of __declspec(dllexport). */
     .section .drectve
@@ -282,6 +265,6 @@
  * use __linux__ here, but I don't know a way to detect when
  * we are using GNU assembler.
  */
-#if defined(__ELF__) && defined(__linux__)
+#if defined(__ELF__)
     .section    .note.GNU-stack,"",@progbits
 #endif

Only a few packages away from pacman…
Perl is still being a pain

Last edited by Barrucadu (2010-01-18 00:15:19)

Allan · 2010-01-18 01:17:01

@apollokk: despite five posts in a row (learn to use the edit button...) you have not actually posted the first build error which has caused all subsequent errors for you.

Allan · 2010-01-18 01:20:58

Barrucadu wrote:

Perl is still being a pain

I'm guessing you are building that for openssl? I'd say that is more of an optdepend, but have not checked.... So would not get too carried away with trying to get it to work until you try building openssl without it.

apollokk · 2010-01-18 08:57:05

Barrucadu wrote:

apollokk wrote:
Hm, I'll see, cause I have a lot of chroots for the time being.
…are you sure we're talking about the same thing?
You should have no reason to have many chroots.

I have, a mini-Gentoo partition -> chrooted, a mini-Fedora partition chrooted .... we are talking about the same thing.

@Allan: I know the use of edit, but I haven't time. I'll check it the afternoon, at home.

chris200x9 · 2010-01-19 16:43:13

flamelab wrote:

h, Allan, can you also ask him if there is a possibility for a x86_64 Hurd ... ?

viengoos is x86_64 AFAIK, time for a fork already?

Last edited by chris200x9 (2010-01-19 16:51:40)

Barrucadu · 2010-01-19 17:33:31

Blargh, I've not had any success with either perl or openssl. I'm thinking it may be easier to get a toolchain running and compile them natively…

Barrucadu · 2010-01-19 20:09:34

gmp and mpfr:

GMP_VER=4.3.1
MPFR_VER=2.4.2

#!/bin/bash

cd $SOURCE_DIR
if [ ! -f gmp-$GMP_VER.tar.bz2 ]; then
  wget ftp://ftp.gnu.org/gnu/gmp/gmp-$GMP_VER.tar.bz2
fi

cd $BUILD_DIR
rm -rf gmp-$GMP_VER
tar -xf $SOURCE_DIR/gmp-$GMP_VER.tar.bz2

rm -rf gmp-build
mkdir -p gmp-build
cd gmp-build

../gmp-$GMP_VER/configure \
  --prefix=$HURD_DIR \
  --infodir=/share/info \
  --build=$TARGET

make
make install

cd $ROOT

#!/bin/bash

cd $SOURCE_DIR
if [ ! -f mpfr-$MPFR_VER.tar.bz2 ]; then
  wget http://mpfr.loria.fr/mpfr-current/mpfr-$MPFR_VER.tar.bz2
fi

cd $BUILD_DIR
rm -rf mpfr-$MPFR_VER
tar -xf $SOURCE_DIR/mpfr-$MPFR_VER.tar.bz2

rm -rf mpfr-build
mkdir -p mpfr-build
cd mpfr-build

../mpfr-$MPFR_VER/configure \
  --prefix= \
  --enable-thread-safe \
  --enable-shared \
  --build=$TARGET
make
make DESTDIR=$HURD_DIR install

cd $ROOT

Allan · 2010-01-20 12:14:23

gmp required adjustments:

../gmp-$GMP_VER/configure \
  --host=$TARGET \
  --prefix=/ --infodir=/share/info

make
make DESTDIR=$HURD_DIR install

mpfr also requires --build changed to --host

Arch Linux

#151 2010-01-17 22:08:55

Re: The Arch Hurd Project

#152 2010-01-17 22:12:07

Re: The Arch Hurd Project

#153 2010-01-17 22:12:29

Re: The Arch Hurd Project

#154 2010-01-17 22:20:35

Re: The Arch Hurd Project

#155 2010-01-17 22:21:37

Re: The Arch Hurd Project

#156 2010-01-17 22:22:35

Re: The Arch Hurd Project

#157 2010-01-17 22:25:16

Re: The Arch Hurd Project

#158 2010-01-17 22:26:26

Re: The Arch Hurd Project

#159 2010-01-17 22:30:39

Re: The Arch Hurd Project

#160 2010-01-17 22:36:01

Re: The Arch Hurd Project

#161 2010-01-17 22:37:06

Re: The Arch Hurd Project

#162 2010-01-17 22:41:10

Re: The Arch Hurd Project

#163 2010-01-17 22:43:15

Re: The Arch Hurd Project

#164 2010-01-17 22:45:00

Re: The Arch Hurd Project

#165 2010-01-17 22:47:58

Re: The Arch Hurd Project

#166 2010-01-17 22:50:51

Re: The Arch Hurd Project

#167 2010-01-17 23:48:00

Re: The Arch Hurd Project

#168 2010-01-18 00:12:41

Re: The Arch Hurd Project

#169 2010-01-18 01:17:01

Re: The Arch Hurd Project

#170 2010-01-18 01:20:58

Re: The Arch Hurd Project

#171 2010-01-18 08:57:05

Re: The Arch Hurd Project

#172 2010-01-19 16:43:13

Re: The Arch Hurd Project

#173 2010-01-19 17:33:31

Re: The Arch Hurd Project

#174 2010-01-19 20:09:34

Re: The Arch Hurd Project

#175 2010-01-20 12:14:23

Re: The Arch Hurd Project

Board footer