You are not logged in.
- Topics: Active | Unanswered
#1 2010-05-22 17:19:51
- tmske
- Member
- Registered: 2006-04-08
- Posts: 21
Wireless disconnects on loading http://learnyouahaskell.com
I have a really strange wireless problem. Today I noticed that surfing to http://learnyouahaskell.com didn't work (I never surfed to it before), I thought it was offline, but after I tried loading the website I my internet was down. I thought it was nothing at first, but after trying to load the website some more (I couldn't find anything about it being offline), my connection was lost each time.
I'm using wicd-client and don't know if this is a wireless only problem or not, but can't try a cable connection at the moment.
Any idea what could be wrong, does the website work for any of you?
output of dmesg:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfe72000 (usable)
BIOS-e820: 00000000dfe72000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.4 present.
last_pfn = 0xdfe72 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FE0000000 write-back
3 base 100000000 mask FE0000000 write-back
4 base 0DFF00000 mask FFFF00000 uncachable
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f000 (usable)
modified: 000000000009f000 - 00000000000a0000 (reserved)
modified: 0000000000100000 - 00000000dfe72000 (usable)
modified: 00000000dfe72000 - 00000000e0000000 (reserved)
modified: 00000000f8000000 - 00000000fc000000 (reserved)
modified: 00000000fec00000 - 00000000fec10000 (reserved)
modified: 00000000fed18000 - 00000000fed1c000 (reserved)
modified: 00000000fed20000 - 00000000fed90000 (reserved)
modified: 00000000feda0000 - 00000000feda6000 (reserved)
modified: 00000000fee00000 - 00000000fee10000 (reserved)
modified: 00000000ffe00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000120000000 (usable)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 15000-1a000
RAMDISK: 7fe4e000 - 7ffef3c1
Allocated new RAMDISK: 00100000 - 002a13c1
Move RAMDISK from 000000007fe4e000 - 000000007ffef3c0 to 00100000 - 002a13c0
ACPI: RSDP 000fbc90 00024 (v02 DELL )
ACPI: XSDT dfe73a00 00064 (v01 DELL M08 27D80B13 ASL 00000061)
ACPI: FACP dfe7389c 000F4 (v04 DELL M08 27D80B13 ASL 00000061)
ACPI: DSDT dfe74000 04BC2 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
ACPI: FACS dfe82800 00040
ACPI: HPET dfe73b00 00038 (v01 DELL M08 00000001 ASL 00000061)
ACPI: APIC dfe73c00 00068 (v01 DELL M08 27D80B13 ASL 00000047)
ACPI: MCFG dfe73bc0 0003E (v16 DELL M08 27D80B13 ASL 00000061)
ACPI: SLIC dfe73c9c 00176 (v01 DELL M08 27D80B13 ASL 00000061)
ACPI: OSFR dfe73200 0002C (v01 DELL M08 27D80B13 ASL 00000061)
ACPI: BOOT dfe737c0 00028 (v01 DELL M08 27D80B13 ASL 00000061)
ACPI: SSDT dfe7217e 004CC (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
2694MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00016000 - 0001cf00
(10 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0001000000 - 0001550444] TEXT DATA BSS ==> [0001000000 - 0001550444]
#3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#4 [0001551000 - 0001557188] BRK ==> [0001551000 - 0001557188]
#5 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
#6 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
#7 [0000015000 - 0000016000] PGTABLE ==> [0000015000 - 0000016000]
#8 [0000100000 - 00002a13c1] NEW RAMDISK ==> [0000100000 - 00002a13c1]
#9 [0000016000 - 000001d000] BOOTMAP ==> [0000016000 - 000001d000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000dfe72
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000dfe72
On node 0 totalpages: 916995
free_area_init_node: node 0, pgdat c13f9880, node_mem_map c1559000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3953 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 5389 pages used for memmap
HighMem zone: 684391 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000002000 - 0000000000010000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c3400000 s34776 r0 d22568 u2097152
pcpu-alloc: s34776 r0 d22568 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 909830
Kernel command line: root=/dev/disk/by-uuid/0834a426-c8f3-4f6d-bd01-8032ac8f8de7 ro
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 18342120 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000377fe:000dfe72)
Memory: 3612168k/3668424k available (2895k kernel code, 54736k reserved, 1208k data, 408k init, 2759120k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1403000 - 0xc1469000 ( 408 kB)
.data : 0xc12d3f1e - 0xc14022e0 (1208 kB)
.text : 0xc1000000 - 0xc12d3f1e (2895 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2493.839 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4989.49 BogoMIPS (lpj=8312796)
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Core revision 20091214
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (9979.78 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xf7ffffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfebfffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xffdfffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x20000000-0x17ffffff] (ignored)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f]
pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f]
pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf6ffc000-0xf6ffffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f]
pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f]
pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f]
pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf]
pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7]
pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb]
pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7]
pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb]
pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff]
pci 0000:00:1f.2: reg 24: [mem 0xf6ffb800-0xf6ffbfff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xf6ffb700-0xf6ffb7ff]
pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df]
pci 0000:01:00.0: reg 10: [mem 0xf5000000-0xf5ffffff]
pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf2000000-0xf3ffffff 64bit]
pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf6efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:09:00.0: reg 10: [mem 0xf1ffc000-0xf1ffffff 64bit]
pci 0000:09:00.0: reg 18: [io 0xde00-0xdeff]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 09-09]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xf1f00000-0xf1ffffff]
pci 0000:0b:00.0: reg 10: [mem 0xf1efe000-0xf1efffff 64bit]
pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0b:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 0b-0b]
pci 0000:00:1c.1: bridge window [mem 0xf1e00000-0xf1efffff]
pci 0000:00:1c.4: PCI bridge to [bus 0c-0d]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf1c00000-0xf1dfffff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:03:09.0: reg 10: [mem 0xf1bff800-0xf1bfffff]
pci 0000:03:09.0: supports D1 D2
pci 0000:03:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:09.0: PME# disabled
pci 0000:03:09.1: reg 10: [mem 0xf1bff400-0xf1bff4ff]
pci 0000:03:09.1: supports D1 D2
pci 0000:03:09.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:09.1: PME# disabled
pci 0000:03:09.2: reg 10: [mem 0xf1bff500-0xf1bff5ff]
pci 0000:03:09.2: supports D1 D2
pci 0000:03:09.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:09.2: PME# disabled
pci 0000:03:09.3: reg 10: [mem 0xf1bff600-0xf1bff6ff]
pci 0000:03:09.3: supports D1 D2
pci 0000:03:09.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:09.3: PME# disabled
pci 0000:03:09.4: reg 10: [mem 0xf1bff700-0xf1bff7ff]
pci 0000:03:09.4: supports D1 D2
pci 0000:03:09.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:09.4: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf1b00000-0xf1bfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0a: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
pnp 00:0a: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
pnp 00:0b: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
pnp 00:0b: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
pnp 00:0b: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xff800000-0xff8fffff] has been reserved
system 00:01: [mem 0xffc00000-0xffcfffff] has been reserved
system 00:06: [io 0x0c80-0x0cff] could not be reserved
system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:0a: [io 0x0900-0x097f] has been reserved
system 00:0a: [io 0x04d0-0x04d1] has been reserved
system 00:0b: [io 0xf400-0xf4fe] has been reserved
system 00:0b: [io 0x1080-0x10bf] has been reserved
system 00:0b: [io 0x10c0-0x10df] has been reserved
system 00:0b: [io 0x0809] has been reserved
system 00:0c: [mem 0x00000000-0x0009efff] could not be reserved
system 00:0c: [mem 0x0009f000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0xdfe71fff] could not be reserved
system 00:0c: [mem 0xdfe72000-0xdfefffff] has been reserved
system 00:0c: [mem 0xdff00000-0xdfffffff] has been reserved
system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved
system 00:0c: [mem 0xffa00000-0xffbfffff] has been reserved
system 00:0c: [mem 0xfec00000-0xfec0ffff] could not be reserved
system 00:0c: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xfeda0000-0xfeda3fff] has been reserved
system 00:0c: [mem 0xfeda4000-0xfeda4fff] has been reserved
system 00:0c: [mem 0xfeda5000-0xfeda5fff] has been reserved
system 00:0c: [mem 0xfeda6000-0xfeda6fff] has been reserved
system 00:0c: [mem 0xfed18000-0xfed1bfff] has been reserved
system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf6efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 09-09]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xf1f00000-0xf1ffffff]
pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 0b-0b]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0xf1e00000-0xf1efffff]
pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0c-0d]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf1c00000-0xf1dfffff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem 0xf1b00000-0xf1bfffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf6efffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:09: resource 1 [mem 0xf1f00000-0xf1ffffff]
pci_bus 0000:09: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:0b: resource 1 [mem 0xf1e00000-0xf1efffff]
pci_bus 0000:0b: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
pci_bus 0000:0c: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:0c: resource 1 [mem 0xf1c00000-0xf1dfffff]
pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf1b00000-0xf1bfffff]
pci_bus 0000:03: resource 3 [io 0x0000-0xffff]
pci_bus 0000:03: resource 4 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1668k freed
Simple Boot Flag at 0x79 set to 0x1
apm: BIOS not found.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1274515844.426:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1671
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 408k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffb900 irq 28
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffba00 irq 28
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
ata5: port disabled. ignoring.
ata4.00: ATAPI: Optiarc DVD+/-RW AD-7640A, JD06, max UDMA/33
ata4.00: configured for UDMA/33
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: ST9500325AS, 0003DEM1, max UDMA/133
ata1.00: 976773168 sectors, multi 8: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0003 PQ: 0 ANSI: 5
scsi 3:0:0:0: CD-ROM Optiarc DVD+-RW AD-7640A JD06 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda6): mounted filesystem with ordered data mode
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
udev: starting version 151
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
input: PC Speaker as /devices/platform/pcspkr/input/input2
sky2 driver version 1.26
sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:09:00.0: setting latency timer to 64
sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
sky2 0000:09:00.0: irq 29 for MSI/MSI-X
sky2 eth0: addr 00:23:ae:00:1e:08
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
usb 1-1: new high speed USB device using ehci_hcd and address 2
Linux agpgart interface v0.103
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input3
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input4
cfg80211: Calling CRDA to update world regulatory domain
ACPI: WMI: Mapper loaded
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (32 C)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
ACPI: Sleep Button [SBTN]
ACPI: AC Adapter [AC] (off-line)
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
ricoh-mmc: Ricoh MMC controller found at 0000:03:09.2 [1180:0843] (rev 12)
ricoh-mmc: Controller is now disabled.
ACPI: SSDT dfe72cb4 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT dfe7264a 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
acpi device:30: registered as cooling_device0
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2d/LNXVIDEO:00/input/input8
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
ACPI: SSDT dfe72f7c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT dfe72c2f 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Battery Slot [BAT0] (battery present)
usb 3-2: new full speed USB device using uhci_hcd and address 2
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
usb 6-1: new full speed USB device using uhci_hcd and address 2
usb 7-2: new full speed USB device using uhci_hcd and address 2
Linux video capture interface: v2.00
firewire_ohci 0000:03:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
input: Dell WMI hotkeys as /devices/virtual/input/input9
hub 7-2:1.0: USB hub found
hub 7-2:1.0: 3 ports detected
firewire_ohci: Added fw-ohci device 0000:03:09.0, OHCI version 1.10
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.15 Thu Mar 11 21:41:46 PST 2010
usb 7-2.1: new full speed USB device using uhci_hcd and address 3
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input10
generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.1/input/input12
generic-usb 0003:046D:C526.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 7-2.2: new full speed USB device using uhci_hcd and address 4
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 2.6.33-ARCH-ks
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:0b:00.0: setting latency timer to 64
iwlagn 0000:0b:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:03:09.1: SDHCI controller found [1180:0822] (rev 22)
sdhci-pci 0000:03:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:03:09.1] using DMA
firewire_core: created device fw0: GUID 374fc000017c1090, S400
iwlagn 0000:0b:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
iwlagn 0000:0b:00.0: irq 30 for MSI/MSI-X
input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input13
generic-usb 0003:0A5C:4502.0003: input,hidraw2: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0
[drm] Initialized drm 1.1.0 20060810
usb 7-2.3: new full speed USB device using uhci_hcd and address 5
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
phy0: Selected rate control algorithm 'iwl-agn-rs'
input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input14
generic-usb 0003:0A5C:4503.0004: input,hidraw3: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0
EXT4-fs (sda7): mounted filesystem with ordered data mode
Adding 2104472k swap on /dev/sda5. Priority:-1 extents:1 across:2104472k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
oss_hdaudio 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
usbcore: registered new interface driver oss_usb
iwlagn 0000:0b:00.0: firmware: requesting iwlwifi-4965-2.ucode
iwlagn 0000:0b:00.0: loaded firmware version 228.61.2.24
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to AP 00:15:e9:63:65:5c (try 1)
wlan0: direct probe to AP 00:15:e9:63:65:5c (try 1)
wlan0: direct probe to AP 00:15:e9:63:65:5c (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:15:e9:63:65:5c (try 1)
wlan0: authenticated
wlan0: associate with AP 00:15:e9:63:65:5c (try 1)
wlan0: RX AssocResp from 00:15:e9:63:65:5c (capab=0x421 status=0 aid=11)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
CE: hpet increasing min_delta_ns to 15000 nsec
CE: hpet increasing min_delta_ns to 22500 nsec
CE: hpet increasing min_delta_ns to 33750 nsec
CE: hpet increasing min_delta_ns to 50624 nsec
No probe response from AP 00:15:e9:63:65:5c after 500ms, disconnecting.
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to AP 00:15:e9:63:65:5c (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:15:e9:63:65:5c (try 1)
wlan0: authenticated
wlan0: associate with AP 00:15:e9:63:65:5c (try 1)
wlan0: RX AssocResp from 00:15:e9:63:65:5c (capab=0x421 status=0 aid=11)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
No probe response from AP 00:15:e9:63:65:5c after 500ms, disconnecting.
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to AP 00:15:e9:63:65:5c (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:15:e9:63:65:5c (try 1)
wlan0: authenticated
wlan0: associate with AP 00:15:e9:63:65:5c (try 1)
wlan0: RX AssocResp from 00:15:e9:63:65:5c (capab=0x421 status=0 aid=11)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
No probe response from AP 00:15:e9:63:65:5c after 500ms, disconnecting.
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to AP 00:15:e9:63:65:5c (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:15:e9:63:65:5c (try 1)
wlan0: authenticated
wlan0: associate with AP 00:15:e9:63:65:5c (try 1)
wlan0: RX AssocResp from 00:15:e9:63:65:5c (capab=0x421 status=0 aid=11)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
No probe response from AP 00:15:e9:63:65:5c after 500ms, disconnecting.
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to AP 00:15:e9:63:65:5c (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:15:e9:63:65:5c (try 1)
wlan0: authenticated
wlan0: associate with AP 00:15:e9:63:65:5c (try 1)
wlan0: RX AssocResp from 00:15:e9:63:65:5c (capab=0x421 status=0 aid=11)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
No probe response from AP 00:15:e9:63:65:5c after 500ms, disconnecting.
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to AP 00:15:e9:63:65:5c (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:15:e9:63:65:5c (try 1)
wlan0: authenticated
wlan0: associate with AP 00:15:e9:63:65:5c (try 1)
wlan0: RX AssocResp from 00:15:e9:63:65:5c (capab=0x421 status=0 aid=11)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
No probe response from AP 00:15:e9:63:65:5c after 500ms, disconnecting.
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to AP 00:15:e9:63:65:5c (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:15:e9:63:65:5c (try 1)
wlan0: authenticated
wlan0: associate with AP 00:15:e9:63:65:5c (try 1)
wlan0: RX AssocResp from 00:15:e9:63:65:5c (capab=0x421 status=0 aid=11)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
No probe response from AP 00:15:e9:63:65:5c after 500ms, disconnecting.
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to AP 00:15:e9:63:65:5c (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:15:e9:63:65:5c (try 1)
wlan0: authenticated
wlan0: associate with AP 00:15:e9:63:65:5c (try 1)
wlan0: RX AssocResp from 00:15:e9:63:65:5c (capab=0x421 status=0 aid=11)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
No probe response from AP 00:15:e9:63:65:5c after 500ms, disconnecting.
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to AP 00:15:e9:63:65:5c (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:15:e9:63:65:5c (try 1)
wlan0: authenticated
wlan0: associate with AP 00:15:e9:63:65:5c (try 1)
wlan0: RX AssocResp from 00:15:e9:63:65:5c (capab=0x421 status=0 aid=11)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
No probe response from AP 00:15:e9:63:65:5c after 500ms, disconnecting.
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to AP 00:15:e9:63:65:5c (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:15:e9:63:65:5c (try 1)
wlan0: authenticated
wlan0: associate with AP 00:15:e9:63:65:5c (try 1)
wlan0: RX AssocResp from 00:15:e9:63:65:5c (capab=0x421 status=0 aid=11)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
No probe response from AP 00:15:e9:63:65:5c after 500ms, disconnecting.
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to AP 00:15:e9:63:65:5c (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:15:e9:63:65:5c (try 1)
wlan0: authenticated
wlan0: associate with AP 00:15:e9:63:65:5c (try 1)
wlan0: RX AssocResp from 00:15:e9:63:65:5c (capab=0x421 status=0 aid=11)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
No probe response from AP 00:15:e9:63:65:5c after 500ms, disconnecting.
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to AP 00:15:e9:63:65:5c (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:15:e9:63:65:5c (try 1)
wlan0: authenticated
wlan0: associate with AP 00:15:e9:63:65:5c (try 1)
wlan0: RX AssocResp from 00:15:e9:63:65:5c (capab=0x421 status=0 aid=11)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
No probe response from AP 00:15:e9:63:65:5c after 500ms, disconnecting.
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to AP 00:15:e9:63:65:5c (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:15:e9:63:65:5c (try 1)
wlan0: authenticated
wlan0: associate with AP 00:15:e9:63:65:5c (try 1)
wlan0: RX AssocResp from 00:15:e9:63:65:5c (capab=0x421 status=0 aid=11)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers presentOffline
#2 2010-05-22 20:30:17
- wuischke
- Member
- From: Suisse Romande
- Registered: 2007-01-06
- Posts: 630
Re: Wireless disconnects on loading http://learnyouahaskell.com
Works fine here, also on wireless using iwl3945 with WPA2-PSK on 11a (5GHz).
Offline
#3 2010-05-22 21:32:17
- tmske
- Member
- Registered: 2006-04-08
- Posts: 21
Re: Wireless disconnects on loading http://learnyouahaskell.com
I'm now on a different wireless network and it works fine too, can this be a problem with my router or something like that? I will try it later on the same network as before to see if it still doesn't work.
Offline
#4 2010-05-23 12:16:52
- tmske
- Member
- Registered: 2006-04-08
- Posts: 21
Re: Wireless disconnects on loading http://learnyouahaskell.com
So I've retried it on the same network and I still have the same problem. What's also strange, is that I can ping the website fine with ping on the command line, but my router has a ping function too, and there I receive a timeout.
I tried the website with the wired connection from the router and it works fine, so this is a wireless only problem with this router.
The router is a d-link di-624
Offline