configuring xorg

lmellen · 2005-03-27 04:43:32

:? If I run xorgconfig and try to startx, it crashes.
If I let hwd -s write a xorg.conf.hwd file and then copy it to xorg.conf, startx works fine, except my mouse and keyboard don't. It doesn't recognize my monitor (NEC MultiSync LCD1720M)
or video card (ATI Radeon 9200). Xorg did not ask what type of monitor I had, and I had to use ATI generic for card type.
I would like to get my mouse (Logitech Trackball) and keyboard (Microsoft Natural or whatever -- the curvy one) working. I'll worry about the monitor and the video card later.
What annoys me is I recently installed Arch in a IBM T-23 and it went in very nicely. Anybody mind giving some assistance? thanks in advance -- Larry

smith · 2005-03-27 05:12:23

I have a logitech marble mouse (trackball) that works well. Here's a snippet of my xorg.conf:

Driver      "mouse"
    Option "Protocol"    "Auto"
    Option "Device"      "/dev/input/mice"
    Option "Buttons"     "5"
    Option "EmulateWheel" "1"
    Option "EmulateWheelButton" "4"
    Option "EmulateWheelInertia" "3"

You don't need xorg to recognize your monitor, just make sure you have the correct Horizsync and Verisync settings. You can find them online for your model most likely. Can't help you with the keyboard.

lmellen · 2005-03-27 05:51:12

Thanks smith --- that didn't work. I loaded the usb modules and changed to a usb port, now mouse and keyboard work. Thanks for the reply -- Larry

FUBAR · 2005-03-27 12:19:46

Running 'xorgcfg -textmode' probably is safer since it starts the configuration in (I think) an ncurses menu.

lmellen · 2005-03-27 12:56:20

:? FUBAR/smith I think Arch is the best linux out there. It installed beautifully on my T-23. You should see the mess I have on my desktop! It installs fine up to the point of xorgconfig. If I pacman KDE, than, Xorg, than hwd everything is fine. I tried 5 or 6 times to xorgconfig and KDE would crash everytime. If I hwd -s and then copy the file to xorg.conf at least KDE runs. I'm stuck in 1280 x 724 screen resolution, try to change it and it crashes. I had the same problem in a dell c-610, would'nt work worth a $h!t. I went to another forum and asked about their linux and ATI --Their reply was the same--ALL LINUX has a problem with ATI. I'll check out the other websites, but I'll probably buy a Nvidia card. Thanks for the reply -- Larry

FUBAR · 2005-03-27 13:04:10

That's not the Linux way! You go and make your ATi work goddammit! Hardware has to listen to you, not the other way round! I'm sure this can work. Post your xorg.conf so we can have a look.

lmellen · 2005-03-27 15:52:32

FUBAR -- Thanks for the reply, actually KDE isn't working that bad, here's xorg.conf:

Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
# PS/2 Mouse not detected
# Serial Mouse not detected
InputDevice "USB Mouse" "CorePointer"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "true"

EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
EndSection

Section "Module"
Load "ddc" # ddc probing of monitor
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "speedo"
Load "type1"
Load "freetype"
Load "record"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" ""

EndSection

Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection

Section "InputDevice"
ection "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection

Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection

# Auto-generated by KNOPPIX mkxf86config

Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 31.0 - 81.1 # Warning: This may fry old Monitors
VertRefresh 56.0 - 85.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
odeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection

Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
Driver "vesa"
VendorName "All"
BoardName "All"
# BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
ction "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection

phrakture · 2005-03-27 17:46:09

ack, knoppix spam...
ok, here's how I'd change it:

Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
#remove whatever fontpath elements don't exist on your system
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
EndSection

Section "Module"
#you may or may not still want this
#Load "ddc" # ddc probing of monitor
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "speedo"
Load "type1"
Load "freetype"
Load "record"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" ""
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "Auto"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection

Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
#make sure these are right for your monitor.... check hwd
HorizSync 31.0 - 81.1 # Warning: This may fry old Monitors
VertRefresh 56.0 - 85.0 # Very conservative. May flicker.
#Remove this modelines, as you shouldn't need them
# unless you have resolution issues
EndSection

Section "Device"
Identifier "Card0"
#switch this as appropriate... I'm guessing
Driver "radeon"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
#Change to 24 (same as 32bit on windows)
DefaultColorDepth 24
# do you really use 1bit/4bit color? remove it
# also, add resolutions in here like the rest:
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

#Delete this section...
#Section "DRI"
#Mode 0666
#EndSection

T-Dawg · 2005-03-27 18:15:23

#Delete this section... 
 #Section "DRI" 
 #Mode 0666 
 #EndSection

Just curious, why delete this lines Phrakture? Does it mean only root is allowed access to dri?

shadowhand · 2005-03-27 18:54:16

Hwd doesn't properly set up mouse and keyboard for whatever reason. It might be worth looking into a little more, but it seems like the same thing happens for everyone.

lmellen · 2005-03-27 20:57:23

Thanks a lot phrakture, you have the rignt code!!! My mouse works in PS/2, I can resize the screen, everything seems to be working. I did not rem out the last section, everything still seems to work fine. Where or when did you learn how to do all this??
I don't know what to think of hwd, it got my H & V sync rates wrong, I used the ones in the manual.
FUBAR --THANK YOU, I don't need to spend more $ on another card! :oops: I still have to configure alsa and cups, so I'll probably be back for more assistance Thanks for the replies-- Larry

phrakture · 2005-03-28 01:20:56

Penguin wrote:

#Delete this section... 
 #Section "DRI" 
 #Mode 0666 
 #EndSection
Just curious, why delete this lines Phrakture? Does it mean only root is allowed access to dri?

hmmm I dunno, maybe it's just with nvidia that you're supposed to remove it

shadowhand · 2005-03-28 08:15:22

phrakture wrote:

Penguin wrote:
#Delete this section... 
 #Section "DRI" 
 #Mode 0666 
 #EndSection
Just curious, why delete this lines Phrakture? Does it mean only root is allowed access to dri?
hmmm I dunno, maybe it's just with nvidia that you're supposed to remove it

Yeah, you only delete that line if you use NV cards.

phrakture · 2005-03-28 16:23:06

lmellen wrote:

Where or when did you learn how to do all this??

many years of doing it on different systems. I think most people start off using xorgcfg or xorgconfig or something like that (knoppix or hwd), but after a bit, you begin to realise that it's a very simple configuration file... you just need to know the format, and what's required. I honestly don't know all the parameters for each driver and things like that, but I can get a working system together off the top of my head...

T-Dawg · 2005-03-28 18:20:03

shadowhand wrote:

Yeah, you only delete that line if you use NV cards.

thanks for the info

Arch Linux

#1 2005-03-27 04:43:32

configuring xorg

#2 2005-03-27 05:12:23

Re: configuring xorg

#3 2005-03-27 05:51:12

Re: configuring xorg

#4 2005-03-27 12:19:46

Re: configuring xorg

#5 2005-03-27 12:56:20

Re: configuring xorg

#6 2005-03-27 13:04:10

Re: configuring xorg

#7 2005-03-27 15:52:32

Re: configuring xorg

#8 2005-03-27 17:46:09

Re: configuring xorg

#9 2005-03-27 18:15:23

Re: configuring xorg

#10 2005-03-27 18:54:16

Re: configuring xorg

#11 2005-03-27 20:57:23

Re: configuring xorg

#12 2005-03-28 01:20:56

Re: configuring xorg

#13 2005-03-28 08:15:22

Re: configuring xorg

#14 2005-03-28 16:23:06

Re: configuring xorg

#15 2005-03-28 18:20:03

Re: configuring xorg

Board footer