SOLVED Vostro 1710 touchpad does not work. Reboot helps (sometimes)

cdwijs · 2010-06-22 19:01:36

Hi All,

[SOLUTION]
Backup your xorg.conf, then remove the following sections from your xorg :
Module, InputDevice (both), ServerLayout, Files. Restart X and see if it works.
[/SOLUTION]

I have a Dell Vostro 1710. The touchpad does not always work. It does not react to a finger touching it. The 2 buttons also don't react.
In windows XP the touchpad works without any problem.

When I (re)boot the laptop, sometimes the touchpad works, and keep working until the following reboot. I think I have a 1:10 chance that the touchpad works after a reboot.

I have attached an USB mouse to my laptop, it works without any problem

This does not produce any output:
cat /dev/input/mouse0
This reacts to my USB mouse, and not to my touchpad:
cat /dev/input/mouse1

uname -a
Linux laptop 2.6.33-ARCH #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010 i686 Intel(R) Core(TM)2 Duo CPU T5670 @ 1.80GHz GenuineIntel GNU/Linux

I know I have a ALPS glidepoint, but the following command does not show any ALPS devices.
cat /proc/bus/input/devices

lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8600M GS] (rev a1)
06:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 03)
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
08:05.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02)
08:05.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02)
08:05.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01)

lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 093a:2510 Pixart Imaging, Inc. Hama Optical Mouse
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

What can I do to investigate this further?

Best regards,
Cedric

Last edited by cdwijs (2010-06-30 18:47:14)

cdwijs · 2010-06-27 08:53:21

Hi Again, I have rebooted my laptop, and now my touchpad is working.

I have an external USB mouse connected

cat /dev/input/mouse0, 1 and 2 do not react to mouse or touchpad movement, /dev/input/mouse3 reacts when I move the external mouse, not on the touchpad. I don't understand this, my touchpad is working.

cat /proc/bus/input/devices shows my USB mouse, and my touchpad:

I: Bus=0003 Vendor=093a Product=2510 Version=0111
N: Name="PIXART USB OPTICAL MOUSE"
P: Phys=usb-0000:00:1d.1-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input11
U: Uniq=
H: Handlers=mouse3 event11 
B: EV=17
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
B: MSC=10

I: Bus=0011 Vendor=0002 Product=0008 Version=7321
N: Name="AlpsPS/2 ALPS GlidePoint"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input4
U: Uniq=
H: Handlers=mouse2 event4 
B: EV=b
B: KEY=420 0 70000 0 0 0 0 0 0 0 0
B: ABS=1000003

lsusb does not show my touchpad, is my touchpad not connected via USB?

lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 093a:2510 Pixart Imaging, Inc. Hama Optical Mouse
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

cat /sys/devices/platform/i8042/serio1/*
auto
i8042 AUX port
cat: /sys/devices/platform/i8042/serio1/driver: Is a directory
cat: /sys/devices/platform/i8042/serio1/drvctl: Permission denied
cat: /sys/devices/platform/i8042/serio1/id: Is a directory
cat: /sys/devices/platform/i8042/serio1/input: Is a directory
serio:ty01pr00id00ex00
cat: /sys/devices/platform/i8042/serio1/power: Is a directory
AlpsPS/2
100
5
200
0

cat: /sys/devices/platform/i8042/serio1/subsystem: Is a directory
DRIVER=psmouse
SERIO_TYPE=01
SERIO_PROTO=00
SERIO_ID=00
SERIO_EXTRA=00
MODALIAS=serio:ty01pr00id00ex00

cat /sys/devices/platform/i8042/serio1/input/input4/*
cat: /sys/devices/platform/i8042/serio1/input/input4/capabilities: Is a directory
cat: /sys/devices/platform/i8042/serio1/input/input4/device: Is a directory
cat: /sys/devices/platform/i8042/serio1/input/input4/event4: Is a directory
cat: /sys/devices/platform/i8042/serio1/input/input4/id: Is a directory
input:b0011v0002p0008e7321-e0,1,3,k110,111,112,145,14A,ra0,1,18,mlsfw
cat: /sys/devices/platform/i8042/serio1/input/input4/mouse2: Is a directory
AlpsPS/2 ALPS GlidePoint
isa0060/serio1/input0
cat: /sys/devices/platform/i8042/serio1/input/input4/power: Is a directory
cat: /sys/devices/platform/i8042/serio1/input/input4/subsystem: Is a directory
PRODUCT=11/2/8/7321
NAME="AlpsPS/2 ALPS GlidePoint"
PHYS="isa0060/serio1/input0"
EV==b
KEY==420 0 70000 0 0 0 0 0 0 0 0
ABS==1000003
MODALIAS=input:b0011v0002p0008e7321-e0,1,3,k110,111,112,145,14A,ra0,1,18,mlsfw

dmesg shows one line for my touchpad: (full dmesg attached)

dmesg | grep Alps
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input4

uname -a
Linux laptop 2.6.33-ARCH #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010 i686 Intel(R) Core(TM)2 Duo CPU T5670 @ 1.80GHz GenuineIntel GNU/Linux

cat /proc/cmdline 
BOOT_IMAGE=/boot/vmlinuz26 root=/dev/disk/by-uuid/70789a6d-f0d8-4f9b-9eda-3388597b685e ro

Can anybody tell me why sometimes my touchpad does not work?

Best regards,
Cedric

Last edited by cdwijs (2010-06-27 20:10:51)

cdwijs · 2010-06-27 08:56:06

My dmesg while touchpad is working: (I don't know how i can attach files)

dmesg 
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
 BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
 BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI present.
last_pfn = 0x7fed0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 07FF00000 mask FFFF00000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000002000 (usable)
 modified: 0000000000002000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 000000000009f800 (usable)
 modified: 000000000009f800 - 00000000000a0000 (reserved)
 modified: 00000000000ce000 - 00000000000d0000 (reserved)
 modified: 00000000000dc000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 000000007fed0000 (usable)
 modified: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
 modified: 000000007fee3000 - 0000000080000000 (reserved)
 modified: 00000000e0000000 - 00000000f0000000 (reserved)
 modified: 00000000fec00000 - 00000000fec10000 (reserved)
 modified: 00000000fed00000 - 00000000fed00400 (reserved)
 modified: 00000000fed14000 - 00000000fed1a000 (reserved)
 modified: 00000000fed1c000 - 00000000fed90000 (reserved)
 modified: 00000000fee00000 - 00000000fee01000 (reserved)
 modified: 00000000ff000000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
found SMP MP-table at [c00f7670] f7670
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 15000-1a000
RAMDISK: 37e2a000 - 37fef13d
Allocated new RAMDISK: 00100000 - 002c513d
Move RAMDISK from 0000000037e2a000 - 0000000037fef13c to 00100000 - 002c513c
ACPI: RSDP 000f75f0 00024 (v02 DELL  )
ACPI: XSDT 7fed67a0 00094 (v01 DELL    M08     06040000  LTP 00000000)
ACPI: FACP 7fedeb60 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT 7fed7c3b 06EB1 (v02 TOSCPL CRESTLNE 06040000 INTL 20060608)
ACPI: FACS 7fee2fc0 00040
ACPI: APIC 7fedec54 00068 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
ACPI: HPET 7fedecbc 00038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG 7fedecf4 0003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
ACPI: TCPA 7feded30 00032 (v01 Intel  CRESTLNE 06040000 LOHR 0000005A)
ACPI: TMOR 7feded62 00026 (v01 PTLTD           06040000 PTL  00000003)
ACPI: OSFR 7feded88 00072 (v01 TOSHIB A+2nd ID 06040000 TASM 04010000)
ACPI: APIC 7fededfa 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
ACPI: BOOT 7fedee62 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
ACPI: SLIC 7fedee8a 00176 (v01 DELL    M08     06040000  LTP 00000000)
ACPI: SSDT 7fed798e 002AD (v01 SataRe SataAhci 00001000 INTL 20061109)
ACPI: SSDT 7fed6dc0 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20061109)
ACPI: SSDT 7fed6d1a 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20061109)
ACPI: SSDT 7fed6834 004E6 (v01  PmRef    CpuPm 00003000 INTL 20061109)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
ACPI: Local APIC address 0xfee00000
1158MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
  node 0 low ram: 00000000 - 377fe000
  node 0 bootmap 00016000 - 0001cf00
(14 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0001000000 - 0001550444]    TEXT DATA BSS ==> [0001000000 - 0001550444]
  #3 [0001551000 - 0001557134]              BRK ==> [0001551000 - 0001557134]
  #4 [00000f7680 - 0000100000]    BIOS reserved ==> [00000f7680 - 0000100000]
  #5 [00000f7670 - 00000f7680]     MP-table mpf ==> [00000f7670 - 00000f7680]
  #6 [000009f800 - 000009fd71]    BIOS reserved ==> [000009f800 - 000009fd71]
  #7 [000009ff25 - 00000f7670]    BIOS reserved ==> [000009ff25 - 00000f7670]
  #8 [000009fd71 - 000009ff25]     MP-table mpc ==> [000009fd71 - 000009ff25]
  #9 [0000010000 - 0000011000]       TRAMPOLINE ==> [0000010000 - 0000011000]
  #10 [0000011000 - 0000015000]      ACPI WAKEUP ==> [0000011000 - 0000015000]
  #11 [0000015000 - 0000016000]          PGTABLE ==> [0000015000 - 0000016000]
  #12 [0000100000 - 00002c513d]      NEW RAMDISK ==> [0000100000 - 00002c513d]
  #13 [0000016000 - 000001d000]          BOOTMAP ==> [0000016000 - 000001d000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x0007fed0
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000000 -> 0x00000002
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0007fed0
On node 0 totalpages: 523873
free_area_init_node: node 0, pgdat c13f9880, node_mem_map c1559000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3953 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 2318 pages used for memmap
  HighMem zone: 294340 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000002000 - 0000000000010000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c2800000 s34776 r0 d22568 u2097152
pcpu-alloc: s34776 r0 d22568 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519779
Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/disk/by-uuid/70789a6d-f0d8-4f9b-9eda-3388597b685e ro
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 10479680 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000377fe:0007fed0)
Memory: 2059548k/2095936k available (2895k kernel code, 34888k reserved, 1208k data, 408k init, 1186632k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff1e000 - 0xfffff000   ( 900 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc1403000 - 0xc1469000   ( 408 kB)
      .data : 0xc12d3f1e - 0xc14022e0   (1208 kB)
      .text : 0xc1000000 - 0xc12d3f1e   (2895 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1795.542 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.71 BogoMIPS (lpj=5985140)
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Core revision 20091214
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     T5670  @ 1.80GHz stepping 0d
Booting Node   0, Processors  #1 Ok.
Initializing CPU#1
CPU1: Thermal monitoring handled by SMI
Brought up 2 CPUs
Total of 2 processors activated (7184.33 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE storm detected, transactions will use polling mode
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io  0x1800-0x181f]
pci 0000:00:1a.1: reg 20: [io  0x1820-0x183f]
pci 0000:00:1a.7: reg 10: [mem 0xf8304800-0xf8304bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf8300000-0xf8303fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0x1840-0x185f]
pci 0000:00:1d.1: reg 20: [io  0x1860-0x187f]
pci 0000:00:1d.2: reg 20: [io  0x1880-0x189f]
pci 0000:00:1d.7: reg 10: [mem 0xf8304c00-0xf8304fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 007f)
pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io  0x18a0-0x18af]
pci 0000:00:1f.2: reg 10: [io  0x18d8-0x18df]
pci 0000:00:1f.2: reg 14: [io  0x18cc-0x18cf]
pci 0000:00:1f.2: reg 18: [io  0x18d0-0x18d7]
pci 0000:00:1f.2: reg 1c: [io  0x18c8-0x18cb]
pci 0000:00:1f.2: reg 20: [io  0x18e0-0x18ff]
pci 0000:00:1f.2: reg 24: [mem 0xf8304000-0xf83047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
pci 0000:00:1f.3: reg 20: [io  0x1c00-0x1c1f]
pci 0000:01:00.0: reg 10: [mem 0xca000000-0xcaffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xc8000000-0xc9ffffff 64bit]
pci 0000:01:00.0: reg 24: [io  0x2000-0x207f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:01.0:   bridge window [mem 0xc8000000-0xcaffffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc3ffffff]
pci 0000:00:1c.0:   bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf3ffffff]
pci 0000:00:1c.1:   bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
pci 0000:06:00.0: reg 10: [mem 0xf4000000-0xf4003fff 64bit]
pci 0000:06:00.0: reg 18: [mem 0xfc000000-0xfc0fffff 64bit pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.3: PCI bridge to [bus 06-06]
pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:00:1c.3:   bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
pci 0000:07:00.0: reg 10: [io  0x6000-0x60ff]
pci 0000:07:00.0: reg 18: [mem 0xf8410000-0xf8410fff 64bit pref]
pci 0000:07:00.0: reg 20: [mem 0xf8400000-0xf840ffff 64bit pref]
pci 0000:07:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 07-07]
pci 0000:00:1c.4:   bridge window [io  0x6000-0x6fff]
pci 0000:00:1c.4:   bridge window [mem 0xf8400000-0xf84fffff 64bit pref]
pci 0000:08:05.0: reg 10: [mem 0xf8000000-0xf8000fff]
pci 0000:08:05.0: reg 14: [mem 0xf8002000-0xf80027ff]
pci 0000:08:05.0: supports D1 D2
pci 0000:08:05.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:05.0: PME# disabled
pci 0000:08:05.2: reg 10: [mem 0xf8002800-0xf80028ff]
pci 0000:08:05.2: supports D1 D2
pci 0000:08:05.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:05.2: PME# disabled
pci 0000:08:05.3: reg 10: [mem 0xf8001000-0xf8001fff]
pci 0000:08:05.3: supports D1 D2
pci 0000:08:05.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:05.3: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf8000000-0xf80fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:06: [io  0x0680-0x069f] has been reserved
system 00:06: [io  0x0800-0x080f] has been reserved
system 00:06: [io  0x1000-0x107f] has been reserved
system 00:06: [io  0x1180-0x11bf] has been reserved
system 00:06: [io  0xfe00] has been reserved
system 00:06: [io  0xff00-0xff7f] has been reserved
pci 0000:00:1c.4: BAR 14: assigned [mem 0x80000000-0x803fffff]
pci 0000:00:1f.3: BAR 0: assigned [mem 0x80400000-0x804000ff]
pci 0000:00:1f.3: BAR 0: set to [mem 0x80400000-0x804000ff] (PCI address [0x80400000-0x804000ff]
pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:01.0:   bridge window [mem 0xc8000000-0xcaffffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc3ffffff]
pci 0000:00:1c.0:   bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf3ffffff]
pci 0000:00:1c.1:   bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 06-06]
pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:00:1c.3:   bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
pci 0000:07:00.0: BAR 6: assigned [mem 0xf8420000-0xf842ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 07-07]
pci 0000:00:1c.4:   bridge window [io  0x6000-0x6fff]
pci 0000:00:1c.4:   bridge window [mem 0x80000000-0x803fffff]
pci 0000:00:1c.4:   bridge window [mem 0xf8400000-0xf84fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08-08]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem 0xf8000000-0xf80fffff]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xc8000000-0xcaffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc3ffffff]
pci_bus 0000:02: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf3ffffff]
pci_bus 0000:03: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:06: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref]
pci_bus 0000:07: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:07: resource 1 [mem 0x80000000-0x803fffff]
pci_bus 0000:07: resource 2 [mem 0xf8400000-0xf84fffff 64bit pref]
pci_bus 0000:08: resource 1 [mem 0xf8000000-0xf80fffff]
pci_bus 0000:08: resource 3 [io  0x0000-0xffff]
pci_bus 0000:08: resource 4 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1812k freed
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1277634130.506:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1710
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 408k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf8304000 port 0xf8304100 irq 29
ata2: SATA max UDMA/133 abar m2048@0xf8304000 port 0xf8304180 irq 29
ata3: SATA max UDMA/133 abar m2048@0xf8304000 port 0xf8304200 irq 29
pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pata_acpi 0000:00:1f.1: setting latency timer to 64
pata_acpi 0000:00:1f.1: PCI INT A disabled
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1.00: unexpected _GTF length (8)
ata1.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: unexpected _GTF length (8)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata4.00: ATAPI: Optiarc DVD+/-RW AD-7640A, JD06, max UDMA/33
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM            Optiarc  DVD+-RW AD-7640A JD06 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda7): mounted filesystem with ordered data mode
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
udev: starting version 151
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
wl: module license 'Mixed/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
wl 0000:06:00.0: setting latency timer to 64
lib80211_crypt: registered algorithm 'TKIP'
eth0: Broadcom BCM4328 802.11 Hybrid Wireless Controller 5.60.48.36 
input: PC Speaker as /devices/platform/pcspkr/input/input2
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:07:00.0: setting latency timer to 64
r8169 0000:07:00.0: irq 30 for MSI/MSI-X
eth1: RTL8168c/8111c at 0xf8746000, 00:21:70:be:44:ea, XID 1c4000c0 IRQ 30
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
Linux agpgart interface v0.103
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8304800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8304c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
udev: renamed network interface eth0 to eth1
udev: renamed network interface eth1_rename to eth0
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input3
usb 6-2: new low speed USB device using uhci_hcd and address 2
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input4
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
ACPI: Power Button [PWRF]
ACPI: SSDT 7fed768e 00238 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 7fed701f 005EA (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
ACPI: WMI: Mapper loaded
Monitor-Mwait will be used to enter C-1 state
firewire_ohci 0000:08:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ACPI: AC Adapter [ACAD] (on-line)
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: SSDT 7fed78c6 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20061109)
ACPI: SSDT 7fed7609 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20061109)
firewire_ohci: Added fw-ohci device 0000:08:05.0, OHCI version 1.10
Switching to clocksource hpet
acpi device:03: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input9
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
input: Dell WMI hotkeys as /devices/virtual/input/input10
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module  195.36.15  Thu Mar 11 21:41:46 PST 2010
firewire_core: created device fw0: GUID 00000010a000b000, S400
ACPI: Battery Slot [BAT1] (battery present)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:08:05.2: SDHCI controller found [1217:7120] (rev 2)
sdhci-pci 0000:08:05.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
mmc0: Unknown controller version (2). You may experience problems.
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:08:05.2] using DMA
usbcore: registered new interface driver hiddev
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input11
generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.1-2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 31 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC268: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
NTFS driver 2.1.29 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS-fs warning (device sda1): load_system_files(): Unsupported volume flags 0x4000 encountered.
NTFS-fs error (device sda1): load_system_files(): Volume has unsupported flags set.  Mounting read-only.  Run chkdsk and mount in Windows.
REISERFS (device sda9): found reiserfs format "3.6" with standard journal
REISERFS (device sda9): using ordered data mode
REISERFS (device sda9): journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sda9): checking transaction log (sda9)
REISERFS (device sda9): Using r5 hash to sort names
Adding 2931820k swap on /dev/sda8.  Priority:-1 extents:1 across:2931820k 
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
r8169: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
eth1: no IPv6 routers present
fuse init (API version 7.13)
r8169: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
eth1: no IPv6 routers present
process `skype' is using obsolete setsockopt SO_BSDCOMPAT
atkbd.c: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd.c: Use 'setkeycodes e00d <keycode>' to make it known.

Last edited by cdwijs (2010-06-27 20:08:29)

Inxsible · 2010-06-27 17:59:57

I haven't gone thru all that you posted, but could you please use code tags when you post some output or commands, so that its more readable ?

cdwijs · 2010-06-27 20:12:32

Hi Inxsible.

Sorry for the inconvenience, I'm a bit new at this. I've edited my posts.

Best regards,
Cedric

Inxsible · 2010-06-27 20:57:30

cdwijs wrote:

Hi Inxsible.
Sorry for the inconvenience, I'm a bit new at this. I've edited my posts.
Best regards,
Cedric

code tags make it clear for us as to what the output is and what your comments are in between. Helps us in differentiating the noise

Anyway, could you post your /etc/X11/xorg.conf.d/10-evdev.conf and your /etc/X11/xorg.conf.d/10-synaptics.conf ?

Lets see if your touchpad is being recognized correctly. also, post your Xorg.0.log

Also, for now, do not connect your external mouse, that way we can figure out if mouse0 or mouse1 is your synaptic touchpad

Last edited by Inxsible (2010-06-27 20:59:53)

cdwijs · 2010-06-28 17:03:07

I have disconnected my mouse last night, suspended the laptop, and this morning I resumed my laptop. Suspending is never a problem on this laptop.

I don't have the following 2 files on my system,
/etc/X11/xorg.conf.d/10-evdev.conf
/etc/X11/xorg.conf.d/10-synaptics.conf
I only have /etc/X11/xorg.conf:

cat /etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder63)  Tue Oct 20 21:01:12 PDT 2009

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder63)  Fri Aug 14 17:54:58 PDT 2009

Section "Module"
    Load "synaptics"
EndSection

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
#does not work:
#   Option       "XkbOptions" "terminate:ctrl_alt_bksp
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "LPL"
    HorizSync       30.0 - 75.0
    VertRefresh     60.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "LPL"
    HorizSync       30.0 - 75.0
    VertRefresh     60.0
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8600M GS"
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8600M GS"
    BusID          "PCI:1:0:0"
    Screen          1
EndSection

Section "Screen"

# Removed Option "metamodes" "CRT: nvidia-auto-select +0+0"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "TwinViewXineramaInfoOrder" "DFP-0"
    Option         "metamodes" "DFP: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "TwinViewXineramaInfoOrder" "DFP-0"
    Option         "metamodes" "DFP: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

cat /var/log/Xorg.0.log

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686 
Current Operating System: Linux laptop 2.6.33-ARCH #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/disk/by-uuid/70789a6d-f0d8-4f9b-9eda-3388597b685e ro
Build Date: 01 April 2010  05:35:33PM
 
Current version of pixman: 0.18.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 27 10:22:28 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
(--) using VT number 7

(--) PCI:*(0:1:0:0) 10de:0425:1028:0275 nVidia Corporation G86 [GeForce 8600M GS] rev 161, Mem @ 0xca000000/16777216, 0xd0000000/268435456, 0xc8000000/33554432, I/O @ 0x00002000/128
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.7.3, module version = 1.2.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
(II) NVIDIA GLX Module  195.36.15  Thu Mar 11 23:39:48 PST 2010
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  195.36.15  Thu Mar 11 22:01:49 PST 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "DFP: nvidia-auto-select +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "DFP-0"
(**) Jun 27 10:22:30 NVIDIA(0): Enabling RENDER acceleration
(II) Jun 27 10:22:30 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Jun 27 10:22:30 NVIDIA(0):     enabled.
(II) Jun 27 10:22:31 NVIDIA(0): NVIDIA GPU GeForce 8600M GS (G86) at PCI:1:0:0 (GPU-0)
(--) Jun 27 10:22:31 NVIDIA(0): Memory: 524288 kBytes
(--) Jun 27 10:22:31 NVIDIA(0): VideoBIOS: 60.86.64.00.26
(II) Jun 27 10:22:31 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Jun 27 10:22:31 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Jun 27 10:22:31 NVIDIA(0): Connected display device(s) on GeForce 8600M GS at PCI:1:0:0:
(--) Jun 27 10:22:31 NVIDIA(0):     LPL (DFP-0)
(--) Jun 27 10:22:31 NVIDIA(0): LPL (DFP-0): 330.0 MHz maximum pixel clock
(--) Jun 27 10:22:31 NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
(II) Jun 27 10:22:31 NVIDIA(0): Display Device found referenced in MetaMode: DFP-0
(II) Jun 27 10:22:31 NVIDIA(0): Assigned Display Device: DFP-0
(II) Jun 27 10:22:31 NVIDIA(0): Validated modes:
(II) Jun 27 10:22:31 NVIDIA(0):     "DFP:nvidia-auto-select+0+0"
(II) Jun 27 10:22:31 NVIDIA(0): Virtual screen size determined to be 1440 x 900
(--) Jun 27 10:22:32 NVIDIA(0): DPI set to (98, 99); computed from "UseEdidDpi" X config
(--) Jun 27 10:22:32 NVIDIA(0):     option
(==) Jun 27 10:22:32 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Jun 27 10:22:32 NVIDIA: Using 768.00 MB of virtual memory for indirect framebuffer
(II) Jun 27 10:22:32 NVIDIA:     access.
(II) Jun 27 10:22:32 NVIDIA(0): Initialized GPU GART.
(II) Jun 27 10:22:32 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Jun 27 10:22:32 NVIDIA(0):     enough to receive ACPI hotkey events.
(II) Jun 27 10:22:32 NVIDIA(0): ACPI brightness change hotkey events enabled.
(II) Jun 27 10:22:32 NVIDIA(0): Setting mode "DFP:nvidia-auto-select+0+0"
(II) Loading extension NV-GLX
(II) Jun 27 10:22:32 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Jun 27 10:22:32 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.3, module version = 2.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Dell WMI hotkeys
(**) Dell WMI hotkeys: always reports core events
(**) Dell WMI hotkeys: Device: "/dev/input/event10"
(II) Dell WMI hotkeys: Found keys
(II) Dell WMI hotkeys: Configuring as keyboard
(II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event4"
(II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
(II) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
(II) AlpsPS/2 ALPS GlidePoint: finger width range 0 - 0
(II) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
(**) Option "SHMConfig" "true"
(**) Option "HorizScrollDelta" "100"
(**) Option "VertEdgeScroll" "true"
(**) Option "HorizEdgeScroll" "false"
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) AlpsPS/2 ALPS GlidePoint: touchpad found
(**) AlpsPS/2 ALPS GlidePoint: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
(**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
(**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 0
(--) AlpsPS/2 ALPS GlidePoint: touchpad found
(II) config/hal: Adding input device PS/2 Mouse
(**) PS/2 Mouse: always reports core events
(**) PS/2 Mouse: Device: "/dev/input/event3"
(II) PS/2 Mouse: Found 3 mouse buttons
(II) PS/2 Mouse: Found relative axes
(II) PS/2 Mouse: Found x and y relative axes
(II) PS/2 Mouse: Configuring as mouse
(**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(**) PS/2 Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Mouse: (accel) acceleration profile 0
(II) PS/2 Mouse: initialized for relative axes.
(II) config/hal: Adding input device PIXART USB OPTICAL MOUSE
(**) PIXART USB OPTICAL MOUSE: always reports core events
(**) PIXART USB OPTICAL MOUSE: Device: "/dev/input/event11"
(II) PIXART USB OPTICAL MOUSE: Found 3 mouse buttons
(II) PIXART USB OPTICAL MOUSE: Found scroll wheel(s)
(II) PIXART USB OPTICAL MOUSE: Found relative axes
(II) PIXART USB OPTICAL MOUSE: Found x and y relative axes
(II) PIXART USB OPTICAL MOUSE: Configuring as mouse
(**) PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
(**) PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE)
(**) PIXART USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
(**) PIXART USB OPTICAL MOUSE: (accel) acceleration profile 0
(II) PIXART USB OPTICAL MOUSE: initialized for relative axes.
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event7"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event6"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event9"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event8"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: removing device PIXART USB OPTICAL MOUSE
(II) PIXART USB OPTICAL MOUSE: Close
(II) UnloadModule: "evdev"
(II) Jun 27 11:52:11 NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select+0+0@1440x900"
(II) PM Event received: Capability Changed
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Jun 27 11:53:07 NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select+0+0@1440x900"
(II) Jun 27 11:53:08 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Jun 27 11:53:08 NVIDIA(0):     enough to receive ACPI hotkey events.
(II) Jun 27 11:53:08 NVIDIA(0): ACPI brightness change hotkey events enabled.
(--) AlpsPS/2 ALPS GlidePoint: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Dell WMI hotkeys: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) PS/2 Mouse: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Jun 27 11:54:00 NVIDIA(0): Setting mode "DFP-0:640x480+0+0@640x480"
(II) Jun 27 11:54:42 NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select+0+0@1440x900"
(II) Jun 27 11:55:02 NVIDIA(0): Setting mode "DFP-0:640x480+0+0@640x480"
(II) Jun 27 11:55:26 NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select+0+0@1440x900"
(II) Jun 27 11:56:53 NVIDIA(0): Setting mode "DFP-0:640x480+0+0@640x480"
(II) Jun 27 11:57:25 NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select+0+0@1440x900"
(II) Jun 27 11:59:16 NVIDIA(0): Setting mode "DFP-0:640x480+0+0@640x480"
(II) Jun 27 12:18:07 NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select+0+0@1440x900"
(II) Jun 27 12:27:31 NVIDIA(0): Setting mode "DFP-0:640x480+0+0@640x480"
(II) Jun 27 12:38:48 NVIDIA(0): Setting mode "DFP-0:640x480+0+0@640x480"
(II) PM Event received: Capability Changed
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Jun 27 21:38:11 NVIDIA(0): Setting mode "DFP-0:640x480+0+0@640x480"
(II) Jun 27 21:38:12 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Jun 27 21:38:12 NVIDIA(0):     enough to receive ACPI hotkey events.
(II) Jun 27 21:38:12 NVIDIA(0): ACPI brightness change hotkey events enabled.
(--) AlpsPS/2 ALPS GlidePoint: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Dell WMI hotkeys: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) PS/2 Mouse: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Jun 27 21:38:16 NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select+0+0@1440x900"
(II) Jun 27 21:44:15 NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select+0+0@1440x900"
(II) PM Event received: Capability Changed
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Jun 27 21:54:49 NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select+0+0@1440x900"
(II) Jun 27 21:54:51 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Jun 27 21:54:51 NVIDIA(0):     enough to receive ACPI hotkey events.
(II) Jun 27 21:54:51 NVIDIA(0): ACPI brightness change hotkey events enabled.
(--) AlpsPS/2 ALPS GlidePoint: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Dell WMI hotkeys: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) PS/2 Mouse: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Jun 27 22:15:00 NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select+0+0@1440x900"
(II) PM Event received: Capability Changed
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Jun 28 18:53:45 NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select+0+0@1440x900"
(II) Jun 28 18:53:47 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Jun 28 18:53:47 NVIDIA(0):     enough to receive ACPI hotkey events.
(II) Jun 28 18:53:47 NVIDIA(0): ACPI brightness change hotkey events enabled.
(--) AlpsPS/2 ALPS GlidePoint: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Dell WMI hotkeys: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) PS/2 Mouse: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.

Best regards,
Cedric

Inxsible · 2010-06-28 17:18:17

Looks like you are using the older version of xorg. You might wanna update your system and see if it works.

Last edited by Inxsible (2010-06-28 17:35:43)

cdwijs · 2010-06-29 18:12:07

Hi Again,

I have updated my system. No change. I have rebooted 3 times, then my mousepad works again.

What information do we need when the touchpad does not work?

In the meantime, information while the touchpad is working:
I have no USB mouse attached.

cat /etc/X11/xorg.conf.d/10-synaptics.conf 
Section "InputClass"
        Identifier "touchpad catchall"
        Driver "synaptics"
        MatchIsTouchpad "on"
          Option "TapButton1" "1"
          Option "TapButton2" "2"
          Option "TapButton3" "3"
EndSection

cat /etc/X11/xorg.conf.d/10-evdev.conf
# Catchall classes for input devices
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.

Section "InputClass"
        Identifier "evdev pointer catchall"
        MatchIsPointer "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev keyboard catchall"
        MatchIsKeyboard "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev touchpad catchall"
        MatchIsTouchpad "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev tablet catchall"
        MatchIsTablet "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev touchscreen catchall"
        MatchIsTouchscreen "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

cat /var/log/Xorg.0.log
[    16.105] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[    16.105] 
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[    16.105] X Protocol Version 11, Revision 0
[    16.105] Build Operating System: Linux 2.6.34-ARCH i686 
[    16.105] Current Operating System: Linux laptop 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 13:06:16 CEST 2010 i686
[    16.105] Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/disk/by-uuid/70789a6d-f0d8-4f9b-9eda-3388597b685e ro
[    16.105] Build Date: 21 June 2010  11:54:27AM
[    16.105]  
[    16.122] Current version of pixman: 0.18.2
[    16.122]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    16.122] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    16.122] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 29 19:15:39 2010
[    16.226] (==) Using config file: "/etc/X11/xorg.conf"
[    16.226] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    16.316] (==) ServerLayout "Layout0"
[    16.316] (**) |-->Screen "Screen0" (0)
[    16.316] (**) |   |-->Monitor "Monitor0"
[    16.316] (**) |   |-->Device "Device0"
[    16.316] (**) |-->Input Device "Keyboard0"
[    16.316] (**) |-->Input Device "Mouse0"
[    16.316] (**) Option "Xinerama" "0"
[    16.317] (==) Automatically adding devices
[    16.317] (==) Automatically enabling devices
[    16.375] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    16.375]     Entry deleted from font path.
[    16.404] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
[    16.404] (==) ModulePath set to "/usr/lib/xorg/modules"
[    16.404] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    16.404] (WW) Disabling Keyboard0
[    16.404] (WW) Disabling Mouse0
[    16.404] (II) Loader magic: 0x81e9d00
[    16.404] (II) Module ABI versions:
[    16.404]     X.Org ANSI C Emulation: 0.4
[    16.404]     X.Org Video Driver: 7.0
[    16.404]     X.Org XInput driver : 9.0
[    16.404]     X.Org Server Extension : 3.0
[    16.417] (--) PCI:*(0:1:0:0) 10de:0425:1028:0275 nVidia Corporation G86 [GeForce 8600M GS] rev 161, Mem @ 0xca000000/16777216, 0xd0000000/268435456, 0xc8000000/33554432, I/O @ 0x00002000/128
[    16.417] (II) Open ACPI successful (/var/run/acpid.socket)
[    16.417] (II) "extmod" will be loaded by default.
[    16.417] (II) "dbe" will be loaded by default.
[    16.417] (II) "glx" will be loaded by default.
[    16.417] (II) "record" will be loaded by default.
[    16.417] (II) "dri" will be loaded by default.
[    16.417] (II) "dri2" will be loaded by default.
[    16.417] (II) LoadModule: "synaptics"
[    16.494] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    16.501] (II) Module synaptics: vendor="X.Org Foundation"
[    16.501]     compiled for 1.8.0.902, module version = 1.2.2
[    16.501]     Module class: X.Org XInput Driver
[    16.501]     ABI class: X.Org XInput driver, version 9.0
[    16.501] (II) LoadModule: "extmod"
[    16.501] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    16.507] (II) Module extmod: vendor="X.Org Foundation"
[    16.508]     compiled for 1.8.1.902, module version = 1.0.0
[    16.508]     Module class: X.Org Server Extension
[    16.508]     ABI class: X.Org Server Extension, version 3.0
[    16.508] (II) Loading extension MIT-SCREEN-SAVER
[    16.508] (II) Loading extension XFree86-VidModeExtension
[    16.508] (II) Loading extension XFree86-DGA
[    16.508] (II) Loading extension DPMS
[    16.508] (II) Loading extension XVideo
[    16.508] (II) Loading extension XVideo-MotionCompensation
[    16.508] (II) Loading extension X-Resource
[    16.508] (II) LoadModule: "dbe"
[    16.508] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    16.522] (II) Module dbe: vendor="X.Org Foundation"
[    16.522]     compiled for 1.8.1.902, module version = 1.0.0
[    16.522]     Module class: X.Org Server Extension
[    16.522]     ABI class: X.Org Server Extension, version 3.0
[    16.522] (II) Loading extension DOUBLE-BUFFER
[    16.522] (II) LoadModule: "glx"
[    16.522] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    17.207] (II) Module glx: vendor="NVIDIA Corporation"
[    17.207]     compiled for 4.0.2, module version = 1.0.0
[    17.207]     Module class: X.Org Server Extension
[    17.207] (II) NVIDIA GLX Module  256.35  Wed Jun 16 19:21:24 PDT 2010
[    17.207] (II) Loading extension GLX
[    17.207] (II) LoadModule: "record"
[    17.207] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    17.219] (II) Module record: vendor="X.Org Foundation"
[    17.219]     compiled for 1.8.1.902, module version = 1.13.0
[    17.219]     Module class: X.Org Server Extension
[    17.219]     ABI class: X.Org Server Extension, version 3.0
[    17.219] (II) Loading extension RECORD
[    17.219] (II) LoadModule: "dri"
[    17.219] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    17.231] (II) Module dri: vendor="X.Org Foundation"
[    17.231]     compiled for 1.8.1.902, module version = 1.0.0
[    17.231]     ABI class: X.Org Server Extension, version 3.0
[    17.231] (II) Loading extension XFree86-DRI
[    17.231] (II) LoadModule: "dri2"
[    17.231] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    17.242] (II) Module dri2: vendor="X.Org Foundation"
[    17.242]     compiled for 1.8.1.902, module version = 1.2.0
[    17.242]     ABI class: X.Org Server Extension, version 3.0
[    17.242] (II) Loading extension DRI2
[    17.242] (II) LoadModule: "nvidia"
[    17.243] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    17.284] (II) Module nvidia: vendor="NVIDIA Corporation"
[    17.284]     compiled for 4.0.2, module version = 1.0.0
[    17.285]     Module class: X.Org Video Driver
[    17.333] (II) NVIDIA dlloader X Driver  256.35  Wed Jun 16 18:59:34 PDT 2010
[    17.335] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    17.335] (--) using VT number 7

[    17.338] (II) Primary Device is: PCI 01@00:00:0
[    17.339] (II) Loading sub module "fb"
[    17.339] (II) LoadModule: "fb"
[    17.339] (II) Loading /usr/lib/xorg/modules/libfb.so
[    17.351] (II) Module fb: vendor="X.Org Foundation"
[    17.351]     compiled for 1.8.1.902, module version = 1.0.0
[    17.351]     ABI class: X.Org ANSI C Emulation, version 0.4
[    17.351] (II) Loading sub module "wfb"
[    17.351] (II) LoadModule: "wfb"
[    17.351] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    17.353] (II) Module wfb: vendor="X.Org Foundation"
[    17.353]     compiled for 1.8.1.902, module version = 1.0.0
[    17.353]     ABI class: X.Org ANSI C Emulation, version 0.4
[    17.353] (II) Loading sub module "ramdac"
[    17.353] (II) LoadModule: "ramdac"
[    17.353] (II) Module "ramdac" already built-in
[    17.367] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    17.367] (==) NVIDIA(0): RGB weight 888
[    17.367] (==) NVIDIA(0): Default visual is TrueColor
[    17.367] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    17.367] (**) NVIDIA(0): Option "TwinView" "0"
[    17.367] (**) NVIDIA(0): Option "MetaModes" "DFP: nvidia-auto-select +0+0"
[    17.367] (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "DFP-0"
[    17.367] (**) NVIDIA(0): Enabling RENDER acceleration
[    17.367] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[    17.367] (II) NVIDIA(0):     enabled.
[    18.803] (II) NVIDIA(0): NVIDIA GPU GeForce 8600M GS (G86) at PCI:1:0:0 (GPU-0)
[    18.803] (--) NVIDIA(0): Memory: 524288 kBytes
[    18.803] (--) NVIDIA(0): VideoBIOS: 60.86.64.00.26
[    18.803] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    18.803] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    18.803] (--) NVIDIA(0): Connected display device(s) on GeForce 8600M GS at PCI:1:0:0:
[    18.803] (--) NVIDIA(0):     LPL (DFP-0)
[    18.803] (--) NVIDIA(0): LPL (DFP-0): 330.0 MHz maximum pixel clock
[    18.803] (--) NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
[    18.807] (II) NVIDIA(0): Display Device found referenced in MetaMode: DFP-0
[    18.849] (II) NVIDIA(0): Assigned Display Device: DFP-0
[    18.849] (II) NVIDIA(0): Validated modes:
[    18.849] (II) NVIDIA(0):     "DFP:nvidia-auto-select+0+0"
[    18.849] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[    19.869] (--) NVIDIA(0): DPI set to (98, 99); computed from "UseEdidDpi" X config
[    19.869] (--) NVIDIA(0):     option
[    19.870] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[    19.870] (--) Depth 24 pixmap format is 32 bpp
[    19.870] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    19.871] (II) NVIDIA(0): Initialized GPU GART.
[    19.877] (II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
[    19.877] (II) NVIDIA(0):     enough to receive ACPI hotkey events.
[    19.877] (II) NVIDIA(0): ACPI brightness change hotkey events enabled.
[    19.881] (II) NVIDIA(0): Setting mode "DFP:nvidia-auto-select+0+0"
[    20.221] (II) Loading extension NV-GLX
[    20.263] (II) NVIDIA(0): Initialized OpenGL Acceleration
[    20.295] (==) NVIDIA(0): Disabling shared memory pixmaps
[    20.295] (II) NVIDIA(0): Initialized X Rendering Acceleration
[    20.308] (==) NVIDIA(0): Backing store disabled
[    20.308] (==) NVIDIA(0): Silken mouse enabled
[    20.313] (**) NVIDIA(0): DPMS enabled
[    20.313] (II) Loading extension NV-CONTROL
[    20.314] (II) Loading extension XINERAMA
[    20.314] (II) Loading sub module "dri2"
[    20.314] (II) LoadModule: "dri2"
[    20.314] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[    20.314] (II) NVIDIA(0): [DRI2] Setup complete
[    20.314] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    20.314] (==) RandR enabled
[    20.314] (II) Initializing built-in extension Generic Event Extension
[    20.314] (II) Initializing built-in extension SHAPE
[    20.314] (II) Initializing built-in extension MIT-SHM
[    20.314] (II) Initializing built-in extension XInputExtension
[    20.314] (II) Initializing built-in extension XTEST
[    20.314] (II) Initializing built-in extension BIG-REQUESTS
[    20.314] (II) Initializing built-in extension SYNC
[    20.314] (II) Initializing built-in extension XKEYBOARD
[    20.314] (II) Initializing built-in extension XC-MISC
[    20.314] (II) Initializing built-in extension SECURITY
[    20.314] (II) Initializing built-in extension XINERAMA
[    20.314] (II) Initializing built-in extension XFIXES
[    20.314] (II) Initializing built-in extension RENDER
[    20.314] (II) Initializing built-in extension RANDR
[    20.314] (II) Initializing built-in extension COMPOSITE
[    20.314] (II) Initializing built-in extension DAMAGE
[    20.317] (II) Initializing extension GLX
[    20.896] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    20.896] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.896] (II) LoadModule: "evdev"
[    20.896] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.913] (II) Module evdev: vendor="X.Org Foundation"
[    20.913]     compiled for 1.8.0, module version = 2.4.0
[    20.913]     Module class: X.Org XInput Driver
[    20.913]     ABI class: X.Org XInput driver, version 9.0
[    20.913] (**) Power Button: always reports core events
[    20.913] (**) Power Button: Device: "/dev/input/event5"
[    20.923] (II) Power Button: Found keys
[    20.923] (II) Power Button: Configuring as keyboard
[    20.923] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    20.923] (**) Option "xkb_rules" "evdev"
[    20.923] (**) Option "xkb_model" "evdev"
[    20.923] (**) Option "xkb_layout" "us"
[    20.959] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    20.959] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    20.959] (**) Video Bus: always reports core events
[    20.959] (**) Video Bus: Device: "/dev/input/event6"
[    20.966] (II) Video Bus: Found keys
[    20.966] (II) Video Bus: Configuring as keyboard
[    20.966] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    20.966] (**) Option "xkb_rules" "evdev"
[    20.966] (**) Option "xkb_model" "evdev"
[    20.966] (**) Option "xkb_layout" "us"
[    20.969] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    20.969] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.969] (**) Power Button: always reports core events
[    20.969] (**) Power Button: Device: "/dev/input/event3"
[    20.976] (II) Power Button: Found keys
[    20.976] (II) Power Button: Configuring as keyboard
[    20.976] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    20.976] (**) Option "xkb_rules" "evdev"
[    20.976] (**) Option "xkb_model" "evdev"
[    20.976] (**) Option "xkb_layout" "us"
[    20.977] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    20.977] (II) No input driver/identifier specified (ignoring)
[    20.977] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[    20.977] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    20.977] (**) Sleep Button: always reports core events
[    20.977] (**) Sleep Button: Device: "/dev/input/event4"
[    20.986] (II) Sleep Button: Found keys
[    20.986] (II) Sleep Button: Configuring as keyboard
[    20.986] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[    20.986] (**) Option "xkb_rules" "evdev"
[    20.986] (**) Option "xkb_model" "evdev"
[    20.986] (**) Option "xkb_layout" "us"
[    20.988] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[    20.988] (II) No input driver/identifier specified (ignoring)
[    20.992] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    20.992] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    20.992] (**) AT Translated Set 2 keyboard: always reports core events
[    20.992] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    21.003] (II) AT Translated Set 2 keyboard: Found keys
[    21.003] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    21.003] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    21.003] (**) Option "xkb_rules" "evdev"
[    21.003] (**) Option "xkb_model" "evdev"
[    21.003] (**) Option "xkb_layout" "us"
[    21.004] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event7)
[    21.004] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[    21.004] (**) PS/2 Mouse: always reports core events
[    21.004] (**) PS/2 Mouse: Device: "/dev/input/event7"
[    21.016] (II) PS/2 Mouse: Found 3 mouse buttons
[    21.016] (II) PS/2 Mouse: Found relative axes
[    21.016] (II) PS/2 Mouse: Found x and y relative axes
[    21.016] (II) PS/2 Mouse: Configuring as mouse
[    21.016] (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
[    21.016] (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    21.016] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
[    21.016] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[    21.017] (**) PS/2 Mouse: (accel) acceleration profile 0
[    21.017] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[    21.017] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[    21.017] (II) PS/2 Mouse: initialized for relative axes.
[    21.017] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
[    21.017] (II) No input driver/identifier specified (ignoring)
[    21.017] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event8)
[    21.017] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[    21.017] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[    21.017] (II) Synaptics touchpad driver version 1.2.2
[    21.017] (**) Option "Device" "/dev/input/event8"
[    21.056] (II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[    21.056] (II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[    21.056] (II) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[    21.056] (II) AlpsPS/2 ALPS GlidePoint: finger width range 0 - 0
[    21.056] (II) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[    21.056] (**) Option "TapButton1" "1"
[    21.056] (**) Option "TapButton2" "2"
[    21.056] (**) Option "TapButton3" "3"
[    21.083] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[    21.083] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    21.096] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
[    21.096] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[    21.096] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 0
[    21.096] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[    21.096] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[    21.123] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[    21.123] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[    21.123] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[    21.123] (II) Synaptics touchpad driver version 1.2.2
[    21.623] AlpsPS/2 ALPS GlidePoint no synaptics event device found
[    21.623] (**) Option "Device" "/dev/input/mouse1"
[    21.636] (**) Option "TapButton1" "1"
[    21.636] (**) Option "TapButton2" "2"
[    21.636] (**) Option "TapButton3" "3"
[    21.657] Query no Synaptics: 6003C8
[    21.657] (--) AlpsPS/2 ALPS GlidePoint: no supported touchpad found
[    21.657] (EE) AlpsPS/2 ALPS GlidePoint Unable to query/initialize Synaptics hardware.
[    21.696] (EE) PreInit failed for input device "AlpsPS/2 ALPS GlidePoint"
[    21.696] (II) UnloadModule: "synaptics"
[    21.697] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[    21.697] (II) No input driver/identifier specified (ignoring)
[    21.697] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event9)
[    21.697] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    21.697] (**) Dell WMI hotkeys: always reports core events
[    21.697] (**) Dell WMI hotkeys: Device: "/dev/input/event9"
[    21.723] (II) Dell WMI hotkeys: Found keys
[    21.723] (II) Dell WMI hotkeys: Configuring as keyboard
[    21.723] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD)
[    21.723] (**) Option "xkb_rules" "evdev"
[    21.723] (**) Option "xkb_model" "evdev"
[    21.723] (**) Option "xkb_layout" "us"

Best regards,
Cedric

Inxsible · 2010-06-29 18:57:13

These lines look interesting. are you still using kbd and mouse drivers in xorg.conf?

cdwijs wrote:

[    16.404] (==) ModulePath set to "/usr/lib/xorg/modules"
[    16.404] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    16.404] (WW) Disabling Keyboard0
[    16.404] (WW) Disabling Mouse0

[    21.657] Query no Synaptics: 6003C8
[    21.657] (--) AlpsPS/2 ALPS GlidePoint: no supported touchpad found
[    21.657] (EE) AlpsPS/2 ALPS GlidePoint Unable to query/initialize Synaptics hardware.
[    21.696] (EE) PreInit failed for input device "AlpsPS/2 ALPS GlidePoint"
[    21.696] (II) UnloadModule: "synaptics"

Last edited by Inxsible (2010-06-29 19:00:23)

cdwijs · 2010-06-30 05:06:28

How can I see / change that?

Best regards,
Cedric

xorg.conf:

cat /etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder63)  Tue Oct 20 21:01:12 PDT 2009

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder63)  Fri Aug 14 17:54:58 PDT 2009

Section "Module"
    Load "synaptics"
EndSection

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
#does not work:
#   Option       "XkbOptions" "terminate:ctrl_alt_bksp
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "LPL"
    HorizSync       30.0 - 75.0
    VertRefresh     60.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "LPL"
    HorizSync       30.0 - 75.0
    VertRefresh     60.0
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8600M GS"
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8600M GS"
    BusID          "PCI:1:0:0"
    Screen          1
EndSection

Section "Screen"

# Removed Option "metamodes" "CRT: nvidia-auto-select +0+0"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "TwinViewXineramaInfoOrder" "DFP-0"
    Option         "metamodes" "DFP: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "TwinViewXineramaInfoOrder" "DFP-0"
    Option         "metamodes" "DFP: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Inxsible · 2010-06-30 16:59:20

Backup your xorg.conf, then remove the following sections from your xorg : Module, InputDevice (both), ServerLayout, Files. Restart X and see if it works.

Let us know.

Last edited by Inxsible (2010-06-30 16:59:46)

cdwijs · 2010-06-30 18:44:46

Thank you Inxsible,

I have removed the secions you mentioned.

I have rebooted four times, and everytime the touchpad works.

Best regards,
Cedric

Arch Linux

#1 2010-06-22 19:01:36

SOLVED Vostro 1710 touchpad does not work. Reboot helps (sometimes)

#2 2010-06-27 08:53:21

Re: SOLVED Vostro 1710 touchpad does not work. Reboot helps (sometimes)

#3 2010-06-27 08:56:06

Re: SOLVED Vostro 1710 touchpad does not work. Reboot helps (sometimes)

#4 2010-06-27 17:59:57

Re: SOLVED Vostro 1710 touchpad does not work. Reboot helps (sometimes)

#5 2010-06-27 20:12:32

Re: SOLVED Vostro 1710 touchpad does not work. Reboot helps (sometimes)

#6 2010-06-27 20:57:30

Re: SOLVED Vostro 1710 touchpad does not work. Reboot helps (sometimes)

#7 2010-06-28 17:03:07

Re: SOLVED Vostro 1710 touchpad does not work. Reboot helps (sometimes)

#8 2010-06-28 17:18:17

Re: SOLVED Vostro 1710 touchpad does not work. Reboot helps (sometimes)

#9 2010-06-29 18:12:07

Re: SOLVED Vostro 1710 touchpad does not work. Reboot helps (sometimes)

#10 2010-06-29 18:57:13

Re: SOLVED Vostro 1710 touchpad does not work. Reboot helps (sometimes)

#11 2010-06-30 05:06:28

Re: SOLVED Vostro 1710 touchpad does not work. Reboot helps (sometimes)

#12 2010-06-30 16:59:20

Re: SOLVED Vostro 1710 touchpad does not work. Reboot helps (sometimes)

#13 2010-06-30 18:44:46

Re: SOLVED Vostro 1710 touchpad does not work. Reboot helps (sometimes)

Board footer