You are not logged in.

Pages: 1

#1 2010-06-28 15:47:36

Miles28
Member
From: Spain
Registered: 2008-08-31
Posts: 88

New monitor, low screen resolution

I've got a new monitor, a LG Flatron E2250V. According to manual, it supports 1920x1080 screen resolution.

Xorg is 1.8.

This is the last /var/log/Xorg.0.log:

[    14.107] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[    14.107] 
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[    14.108] X Protocol Version 11, Revision 0
[    14.108] Build Operating System: Linux 2.6.34-ARCH i686 
[    14.108] Current Operating System: Linux nono 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 13:06:16 CEST 2010 i686
[    14.108] Kernel command line: root=/dev/disk/by-uuid/233b9b80-e3e9-420e-be69-ef7cd354309b ro vga=775
[    14.108] Build Date: 21 June 2010  11:54:27AM
[    14.108]  
[    14.109] Current version of pixman: 0.18.2
[    14.109]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    14.109] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    14.109] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 28 17:07:31 2010
[    14.131] (==) Using config file: "/etc/X11/xorg.conf"
[    14.131] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    14.145] (==) ServerLayout "X.org Configured"
[    14.145] (**) |-->Screen "Screen0" (0)
[    14.145] (**) |   |-->Monitor "Monitor0"
[    14.145] (**) |   |-->Device "Card0"
[    14.146] (**) |-->Input Device "Mouse0"
[    14.146] (**) |-->Input Device "Keyboard0"
[    14.146] (==) Automatically adding devices
[    14.146] (==) Automatically enabling devices
[    14.192] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    14.192]     Entry deleted from font path.
[    14.224] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    14.224]     Entry deleted from font path.
[    14.224] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
[    14.224] (**) ModulePath set to "/usr/lib/xorg/modules"
[    14.224] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    14.224] (WW) Disabling Mouse0
[    14.224] (WW) Disabling Keyboard0
[    14.224] (II) Loader magic: 0x81e9d00
[    14.224] (II) Module ABI versions:
[    14.224]     X.Org ANSI C Emulation: 0.4
[    14.224]     X.Org Video Driver: 7.0
[    14.224]     X.Org XInput driver : 9.0
[    14.224]     X.Org Server Extension : 3.0
[    14.239] (--) PCI:*(0:0:2:0) 8086:29c2:1462:7528 Intel Corporation 82G33/G31 Express Integrated Graphics Controller rev 16, Mem @ 0xfea80000/524288, 0xd0000000/268435456, 0xfe900000/1048576, I/O @ 0x0000dc00/8
[    14.239] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    14.239] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[    14.239] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[    14.239] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    14.239] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[    14.239] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[    14.239] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[    14.239] (II) LoadModule: "glx"
[    14.278] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    14.306] (II) Module glx: vendor="X.Org Foundation"
[    14.306]     compiled for 1.8.1.902, module version = 1.0.0
[    14.306]     ABI class: X.Org Server Extension, version 3.0
[    14.351] (==) AIGLX enabled
[    14.351] (II) Loading extension GLX
[    14.351] (II) LoadModule: "dri2"
[    14.351] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    14.370] (II) Module dri2: vendor="X.Org Foundation"
[    14.370]     compiled for 1.8.1.902, module version = 1.2.0
[    14.370]     ABI class: X.Org Server Extension, version 3.0
[    14.370] (II) Loading extension DRI2
[    14.370] (II) LoadModule: "record"
[    14.371] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    14.392] (II) Module record: vendor="X.Org Foundation"
[    14.392]     compiled for 1.8.1.902, module version = 1.13.0
[    14.392]     Module class: X.Org Server Extension
[    14.392]     ABI class: X.Org Server Extension, version 3.0
[    14.392] (II) Loading extension RECORD
[    14.392] (II) LoadModule: "dbe"
[    14.392] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    14.393] (II) Module dbe: vendor="X.Org Foundation"
[    14.393]     compiled for 1.8.1.902, module version = 1.0.0
[    14.393]     Module class: X.Org Server Extension
[    14.393]     ABI class: X.Org Server Extension, version 3.0
[    14.393] (II) Loading extension DOUBLE-BUFFER
[    14.393] (II) LoadModule: "extmod"
[    14.393] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    14.399] (II) Module extmod: vendor="X.Org Foundation"
[    14.399]     compiled for 1.8.1.902, module version = 1.0.0
[    14.399]     Module class: X.Org Server Extension
[    14.399]     ABI class: X.Org Server Extension, version 3.0
[    14.399] (II) Loading extension MIT-SCREEN-SAVER
[    14.399] (II) Loading extension XFree86-VidModeExtension
[    14.399] (II) Loading extension XFree86-DGA
[    14.399] (II) Loading extension DPMS
[    14.399] (II) Loading extension XVideo
[    14.399] (II) Loading extension XVideo-MotionCompensation
[    14.399] (II) Loading extension X-Resource
[    14.399] (II) LoadModule: "dri"
[    14.399] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    14.406] (II) Module dri: vendor="X.Org Foundation"
[    14.406]     compiled for 1.8.1.902, module version = 1.0.0
[    14.406]     ABI class: X.Org Server Extension, version 3.0
[    14.406] (II) Loading extension XFree86-DRI
[    14.406] (II) LoadModule: "intel"
[    14.439] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    14.464] (II) Module intel: vendor="X.Org Foundation"
[    14.464]     compiled for 1.8.1, module version = 2.11.0
[    14.464]     Module class: X.Org Video Driver
[    14.464]     ABI class: X.Org Video Driver, version 7.0
[    14.464] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[    14.464] (++) using VT number 7

[    14.470] (II) Primary Device is: PCI 00@00:02:0
[    14.475] drmOpenDevice: node name is /dev/dri/card0
[    14.475] drmOpenDevice: open result is 8, (OK)
[    14.496] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    14.496] drmOpenDevice: node name is /dev/dri/card0
[    14.496] drmOpenDevice: open result is 8, (OK)
[    14.496] drmOpenByBusid: drmOpenMinor returns 8
[    14.496] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    14.496] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    14.497] (==) intel(0): RGB weight 888
[    14.497] (==) intel(0): Default visual is TrueColor
[    14.497] (II) intel(0): Integrated Graphics Chipset: Intel(R) G33
[    14.497] (--) intel(0): Chipset: "G33"
[    14.497] (==) intel(0): video overlay key set to 0x101fe
[    14.915] (II) intel(0): Output VGA1 using monitor section Monitor0
[    15.332] (II) intel(0): EDID for output VGA1
[    15.332] (II) intel(0): Not using default mode "640x350" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "640x400" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "720x400" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "640x480" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "640x480" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "640x480" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "800x600" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "800x600" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "800x600" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1024x768i" (interlace mode not supported)
[    15.332] (II) intel(0): Not using default mode "512x384i" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1280x960" (hsync out of range)
[    15.332] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1280x960" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1280x1024" (hsync out of range)
[    15.332] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1600x1200" (hsync out of range)
[    15.332] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1792x1344" (hsync out of range)
[    15.332] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1792x1344" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1856x1392" (hsync out of range)
[    15.332] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1856x1392" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1920x1440" (hsync out of range)
[    15.332] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "832x624" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1400x1050" (hsync out of range)
[    15.332] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
[    15.332] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    15.332] (II) intel(0): Not using default mode "2048x1536" (hsync out of range)
[    15.332] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    15.333] (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
[    15.333] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    15.333] (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
[    15.333] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    15.333] (II) intel(0): Printing probed modes for output VGA1
[    15.333] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    15.333] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    15.333] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    15.333] (II) intel(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz)
[    15.333] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz)
[    15.333] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    15.333] (II) intel(0): Output VGA1 connected
[    15.333] (II) intel(0): Using fuzzy aspect match for initial modes
[    15.333] (II) intel(0): Output VGA1 using initial mode 1024x768
[    15.333] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    15.333] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
[    15.333] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
[    15.333] (==) intel(0): DPI set to (96, 96)
[    15.333] (II) Loading sub module "fb"
[    15.333] (II) LoadModule: "fb"
[    15.333] (II) Loading /usr/lib/xorg/modules/libfb.so
[    15.334] (II) Module fb: vendor="X.Org Foundation"
[    15.334]     compiled for 1.8.1.902, module version = 1.0.0
[    15.334]     ABI class: X.Org ANSI C Emulation, version 0.4
[    15.334] (==) Depth 24 pixmap format is 32 bpp
[    15.334] (II) intel(0): [DRI2] Setup complete
[    15.334] (II) intel(0): [DRI2]   DRI driver: i915
[    15.334] (**) intel(0): Tiling enabled
[    15.334] (**) intel(0): SwapBuffers wait enabled
[    15.334] (==) intel(0): VideoRam: 262144 KB
[    15.334] (II) intel(0): Attempting memory allocation with tiled buffers.
[    15.334] (II) intel(0): Tiled allocation successful.
[    15.343] (II) UXA(0): Driver registered support for the following operations:
[    15.343] (II)         solid
[    15.343] (II)         copy
[    15.343] (II)         composite (RENDER acceleration)
[    15.343] (II)         put_image
[    15.350] (==) intel(0): Backing store disabled
[    15.350] (==) intel(0): Silken mouse enabled
[    15.360] (II) intel(0): Initializing HW Cursor
[    15.390] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    15.397] (==) intel(0): DPMS enabled
[    15.397] (==) intel(0): Intel XvMC decoder disabled
[    15.397] (II) intel(0): Set up textured video
[    15.397] (II) intel(0): Set up overlay video
[    15.397] (II) intel(0): direct rendering: DRI2 Enabled
[    15.397] (--) RandR disabled
[    15.397] (II) Initializing built-in extension Generic Event Extension
[    15.397] (II) Initializing built-in extension SHAPE
[    15.397] (II) Initializing built-in extension MIT-SHM
[    15.397] (II) Initializing built-in extension XInputExtension
[    15.397] (II) Initializing built-in extension XTEST
[    15.397] (II) Initializing built-in extension BIG-REQUESTS
[    15.397] (II) Initializing built-in extension SYNC
[    15.397] (II) Initializing built-in extension XKEYBOARD
[    15.397] (II) Initializing built-in extension XC-MISC
[    15.397] (II) Initializing built-in extension SECURITY
[    15.397] (II) Initializing built-in extension XINERAMA
[    15.397] (II) Initializing built-in extension XFIXES
[    15.397] (II) Initializing built-in extension RENDER
[    15.397] (II) Initializing built-in extension RANDR
[    15.397] (II) Initializing built-in extension COMPOSITE
[    15.397] (II) Initializing built-in extension DAMAGE
[    15.453] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    15.453] (II) AIGLX: enabled GLX_INTEL_swap_event
[    15.453] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    15.453] (II) AIGLX: enabled GLX_SGI_make_current_read
[    15.453] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    15.453] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[    15.453] (II) GLX: Initialized DRI2 GL provider for screen 0
[    15.454] (II) intel(0): Setting screen physical size to 270 x 203
[    16.118] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    16.118] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.118] (II) LoadModule: "evdev"
[    16.118] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.126] (II) Module evdev: vendor="X.Org Foundation"
[    16.126]     compiled for 1.8.0, module version = 2.4.0
[    16.126]     Module class: X.Org XInput Driver
[    16.126]     ABI class: X.Org XInput driver, version 9.0
[    16.126] (**) Power Button: always reports core events
[    16.126] (**) Power Button: Device: "/dev/input/event2"
[    16.133] (II) Power Button: Found keys
[    16.133] (II) Power Button: Configuring as keyboard
[    16.133] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    16.133] (**) Option "xkb_rules" "evdev"
[    16.133] (**) Option "xkb_model" "evdev"
[    16.133] (**) Option "xkb_layout" "us"
[    16.163] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    16.163] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.163] (**) Power Button: always reports core events
[    16.163] (**) Power Button: Device: "/dev/input/event1"
[    16.173] (II) Power Button: Found keys
[    16.173] (II) Power Button: Configuring as keyboard
[    16.173] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    16.173] (**) Option "xkb_rules" "evdev"
[    16.173] (**) Option "xkb_model" "evdev"
[    16.173] (**) Option "xkb_layout" "us"
[    16.174] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[    16.174] (II) No input driver/identifier specified (ignoring)
[    16.176] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
[    16.176] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    16.176] (**) Logitech USB Optical Mouse: always reports core events
[    16.176] (**) Logitech USB Optical Mouse: Device: "/dev/input/event5"
[    16.183] (II) Logitech USB Optical Mouse: Found 3 mouse buttons
[    16.183] (II) Logitech USB Optical Mouse: Found scroll wheel(s)
[    16.183] (II) Logitech USB Optical Mouse: Found relative axes
[    16.183] (II) Logitech USB Optical Mouse: Found x and y relative axes
[    16.183] (II) Logitech USB Optical Mouse: Configuring as mouse
[    16.183] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    16.183] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    16.183] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
[    16.183] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[    16.183] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[    16.183] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    16.183] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    16.183] (II) Logitech USB Optical Mouse: initialized for relative axes.
[    16.184] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[    16.184] (II) No input driver/identifier specified (ignoring)
[    16.190] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    16.190] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    16.190] (**) AT Translated Set 2 keyboard: always reports core events
[    16.190] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    16.200] (II) AT Translated Set 2 keyboard: Found keys
[    16.200] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    16.200] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    16.200] (**) Option "xkb_rules" "evdev"
[    16.200] (**) Option "xkb_model" "evdev"
[    16.200] (**) Option "xkb_layout" "us"
[    16.200] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[    16.200] (II) No input driver/identifier specified (ignoring)

/var/log/errors.log

Jun 28 17:07:28 nono kernel: [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130
Jun 28 17:07:28 nono kernel: [drm:drm_edid_is_valid] *ERROR* Raw EDID:
Jun 28 17:07:28 nono kernel: [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130
Jun 28 17:07:28 nono kernel: [drm:drm_edid_is_valid] *ERROR* Raw EDID:
Jun 28 17:07:28 nono kernel: [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130
Jun 28 17:07:28 nono kernel: [drm:drm_edid_is_valid] *ERROR* Raw EDID:
Jun 28 17:07:28 nono kernel: [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130
Jun 28 17:07:28 nono kernel: [drm:drm_edid_is_valid] *ERROR* Raw EDID:
Jun 28 17:07:28 nono kernel: fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Jun 28 17:07:32 nono kernel: [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130
Jun 28 17:07:32 nono kernel: [drm:drm_edid_is_valid] *ERROR* Raw EDID:
Jun 28 17:07:32 nono kernel: [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130
Jun 28 17:07:32 nono kernel: [drm:drm_edid_is_valid] *ERROR* Raw EDID:
Jun 28 17:07:32 nono kernel: [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130
Jun 28 17:07:32 nono kernel: [drm:drm_edid_is_valid] *ERROR* Raw EDID:
Jun 28 17:07:32 nono kernel: [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130
Jun 28 17:07:32 nono kernel: [drm:drm_edid_is_valid] *ERROR* Raw EDID:
Jun 28 17:07:32 nono kernel: [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130
Jun 28 17:07:32 nono kernel: [drm:drm_edid_is_valid] *ERROR* Raw EDID:
Jun 28 17:07:32 nono kernel: [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130
Jun 28 17:07:32 nono kernel: [drm:drm_edid_is_valid] *ERROR* Raw EDID:
Jun 28 17:07:32 nono kernel: [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130
Jun 28 17:07:32 nono kernel: [drm:drm_edid_is_valid] *ERROR* Raw EDID:
Jun 28 17:07:33 nono kernel: [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130
Jun 28 17:07:33 nono kernel: [drm:drm_edid_is_valid] *ERROR* Raw EDID:
Jun 28 17:07:53 nono kernel: [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130
Jun 28 17:07:53 nono kernel: [drm:drm_edid_is_valid] *ERROR* Raw EDID:
Jun 28 17:07:53 nono kernel: [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130
Jun 28 17:07:53 nono kernel: [drm:drm_edid_is_valid] *ERROR* Raw EDID:
Jun 28 17:07:53 nono kernel: [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130
Jun 28 17:07:53 nono kernel: [drm:drm_edid_is_valid] *ERROR* Raw EDID:
Jun 28 17:07:53 nono kernel: [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130
Jun 28 17:07:53 nono kernel: [drm:drm_edid_is_valid] *ERROR* Raw EDID:

and Xorg.conf:

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/misc/"
    FontPath     "/usr/share/fonts/TTF/"
    FontPath     "/usr/share/fonts/OTF/"
    FontPath     "/usr/share/fonts/Type1/"
    FontPath     "/usr/share/fonts/100dpi/"
    FontPath     "/usr/share/fonts/75dpi/"
EndSection

Section "Module"
    Load  "glx"
    Load  "dri2"
    Load  "record"
    Load  "dbe"
    Load  "extmod"
    Load  "dri"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
    Option      "XkbLayout" "es"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "ColorKey"               # <i>
        #Option     "CacheLines"             # <i>
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "DRI"                    # [<bool>]
        #Option     "NoDDC"                  # [<bool>]
        #Option     "ShowCache"              # [<bool>]
        #Option     "XvMCSurfaces"           # <i>
        #Option     "PageFlip"               # [<bool>]
    Identifier  "Card0"
    Driver      "intel"
    VendorName  "Intel Corporation"
    BoardName   "82G33/G31 Express Integrated Graphics Controller"
    BusID       "PCI:0:2:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Monitor manual shows the folowing specifications:

Horizontal Freq.: 30 - 83 kHz (Automatic)
Vertical Freq.: Analog,Digital : 56 - 75 Hz (Automatic). HDMI : 56 - 61 Hz (Automatic)
Input Form: Separate Sync. Digital.
Resolution Max VESA 1920 x 1080 @60 Hz. Recommend VESA 1920 x 1080 @60 Hz.

At this moment I only get a poor 1024x768 screen resolution.

Adding HorizSync  (30-82) and VertRefresh (56-75), the monitor shows a black screen and an out of range message.

Thanks in advance.

Inteligencia militar son términos contradictorios (G. Marx).

Offline

#2 2010-06-28 17:04:44

Inxsible
Forum Fellow
From: Chicago
Registered: 2008-06-09
Posts: 9,183

Re: New monitor, low screen resolution

You need to add the mode (1920x1080) or any others that you would like to your monitor in the xorg.conf file. Search the forums for examples.

Last edited by Inxsible (2010-06-28 17:05:24)

Forum Rules

There's no such thing as a stupid question, but there sure are a lot of inquisitive idiots !

Offline

#3 2010-06-28 17:12:13

Nixxx
Member
From: Poland
Registered: 2009-08-01
Posts: 85

Re: New monitor, low screen resolution

Try to remove xorg.conf and let the xorg to set the configuration automatically - udev should detect your card and monitor correctly.

Offline

#4 2010-06-29 14:03:04

Miles28
Member
From: Spain
Registered: 2008-08-31
Posts: 88

Re: New monitor, low screen resolution

Nixxx wrote:

Try to remove xorg.conf and let the xorg to set the configuration automatically - udev should detect your card and monitor correctly.

If you see /var/log/errors.log

Jun 28 17:07:28 nono kernel: [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130

the system doesn't get any information about the monitor. I wonder if it is related to Vga/dvi cable, because I'm usin the vga one.

Inteligencia militar son términos contradictorios (G. Marx).

Offline

#5 2010-06-29 17:24:25

gazj
Member
From: /home/gazj -> /uk/cambs
Registered: 2007-02-09
Posts: 681
Website

Re: New monitor, low screen resolution

I just bought two Flatron W1934S monitors.  I spent hours trying to get the max resolution of 1440x900.  Change my old vga cables to the two new ones that came with the monitors and I was away.  I could not belive that was all the problem was.  Hopefully I can save your hours of tinkering with xorg.conf wink

dotfiles : shots : musik : linux : .bin : dwarf blog

Offline

#6 2010-06-29 17:39:08

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 19,804

Re: New monitor, low screen resolution

Miles28 wrote:
Nixxx wrote:

Try to remove xorg.conf and let the xorg to set the configuration automatically - udev should detect your card and monitor correctly.

If you see /var/log/errors.log

Jun 28 17:07:28 nono kernel: [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130

the system doesn't get any information about the monitor. I wonder if it is related to Vga/dvi cable, because I'm usin the vga one.

Miles28 is correct, Auto config will not work without EDID data.  Gazi is correct about cables.  It could be a missing pin in the VESA cable, but then I would expect No EDID data rather than Bad EDID.  It could be a bad cable or bad termination someplace.  Or, I guess, the EDID ROM in the display could be hosed.

Never-the-less, If EDID does not provide the configuration, you are going to have to configure it in Xorg.

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

Offline

#7 2010-06-30 15:17:47

Miles28
Member
From: Spain
Registered: 2008-08-31
Posts: 88

Re: New monitor, low screen resolution

I have added to Section "Screen"

SubSection "Display"
        Viewport   0 0
        Depth     24
        Modes     "1920x1080" #Resolution
EndSubSection

but it doesn't work.

Inteligencia militar son términos contradictorios (G. Marx).

Offline

#8 2010-06-30 16:00:39

Mr.Elendig
#archlinux@freenode channel op
From: The intertubes
Registered: 2004-11-07
Posts: 4,092

Re: New monitor, low screen resolution

Edit:  Try using a dvi cable instead of vga.

Last edited by Mr.Elendig (2010-06-30 16:01:32)

Evil #archlinux@libera.chat channel op and general support dude.
. files on github, Screenshots, Random pics and the rest

Offline

#9 2010-06-30 21:41:41

Miles28
Member
From: Spain
Registered: 2008-08-31
Posts: 88

Re: New monitor, low screen resolution

Mr.Elendig wrote:

Edit:  Try using a dvi cable instead of vga.

It's an integrated graphics card, with only a vga entry sad

Inteligencia militar son términos contradictorios (G. Marx).

Offline

#10 2010-06-30 22:56:29

Mr.Elendig
#archlinux@freenode channel op
From: The intertubes
Registered: 2004-11-07
Posts: 4,092

Re: New monitor, low screen resolution

Provide the edid yourself then, or disable edid and use modelines instead.

Edit: somewhat relevant thread: http://bbs.archlinux.org/viewtopic.php?id=60112

Last edited by Mr.Elendig (2010-06-30 23:00:21)

Evil #archlinux@libera.chat channel op and general support dude.
. files on github, Screenshots, Random pics and the rest

Offline

Pages: 1

Board footer

Powered by FluxBB