You are not logged in.

#2226 2010-08-21 13:27:55

agapito
Member
From: Who cares.
Registered: 2008-11-13
Posts: 641

Re: The AMD/ATI Bar & Grill

Lothium wrote:

I use the free driver and my system runs now for round about 4 hours and X uses 12 MB and plasma desktop 24 MB. So I think only the catalyst driver has a memory consumption problem.

Damn... good numbers. What is your graphic card?


Excuse my poor English.

Offline

#2227 2010-08-21 16:27:36

Lothium
Member
Registered: 2009-10-10
Posts: 192

Re: The AMD/ATI Bar & Grill

FYI, now the consumption is nearly at the same level (X = 22 MB plasma = 30 MB). I have an ATI X700 mobility. The graphics card is very old and since KMS, I have a few problems with the performance (framerate droped around 50%). Hope this get fixed with the new X-Server and ati drivers.

Best regards!

Offline

#2228 2010-08-22 01:32:02

mDuo13
Member
Registered: 2010-04-25
Posts: 93

Re: The AMD/ATI Bar & Grill

Vi0L0 wrote:

You are saying that system is still working so could you try to login to it via ssh (from the other machine) and ie. restart X?

Interesting things here. I managed to connect to the system while it was locked. Here's what I found:
1. `free -m` reports over 1900mb free memory, so it's not strictly a memory leak like I previously thought it might be.
2. The first time I ran `top` it locked up my SSH session - nothing happened even when I pressed CTRL+C. After I closed the terminal window on my remote PC, I was able to SSH back to the machine again. A different time, the "sync" command locked up similarly and I had to close the ssh terminal and wait a while before connecting again. I was however able to reconnect after a short while.
3. I was able to killall wineserver and some other .exe processes that were running. However, I discovered that even if I did `kill -s KILL` with the PID of SC2.exe, it would not kill the process. It would simply return as if it had succeeded, but the process would still be there. This is the first I've seen -s KILL fail to actually kill something. I was similarly unable to kill X.
4. I was able to run `top` on my second try. It showed X using 100% of one CPU core, nothing else using more than a marginal amount of CPU.
5. ps ax shows that the SC2.exe process is in state "DL" which means "interruptible sleep, probably waiting for I/O". Meanwhile the X process is in currently running state. I was not able to restart X.
6. I was able to soft reboot the machine with `shutdown -r now`

Vi0L0 wrote:

Also i found a way to limit fps in SC2 - it is just a fud, it's solution for MacOS and apple's macbook where the problem of overheating also exist, but i believe it should work:
put those lines to variables.txt (in MacOS placed in ~/Documents/Blizzard/Starcraft II/variables.txt, so you have to search it on your own):

frameratecap=40
frameratecapGlue=30

Of course you can change values of this variables.

I added those lines to my Variables.txt file. It did appear to be having an effect (framerate in menus was a steady 30 instead of 59-60) but it did not stop or prevent the crashes at all.

Vi0L0 wrote:

Also instead of reseting it's safer to enable acpi support so you may press the power button and wait for system's halt - that way you will avoid any potential data lose.

I had tried getting ACPI working a different before, but it didn't work. I will try again with the acpid package! Thanks for the tip.

Vi0L0 wrote:

@mDuo13: if you are able to login via ssh when hardlock could you paste /var/log/Xorg.0.log and output of 'dmesg | grep fgl' command (before restarting X)?
If you arent able maybe /var/log/Xorg.1.log still exist and you can paste it here?

Both are pasted below:

Here's xorg.0.log:

[    14.622] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at [url]http://bugs.freedesktop.org[/url]/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See [url]http://wiki.x.org/wiki/GitPage[/url] for git access instructions.
[    14.622] 
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[    14.622] X Protocol Version 11, Revision 0
[    14.622] Build Operating System: Linux 2.6.34-ARCH x86_64 
[    14.622] Current Operating System: Linux trace 2.6.35-rc6-rc #1 SMP PREEMPT Sat Jul 31 19:52:56 PDT 2010 x86_64
[    14.622] Kernel command line: root=/dev/disk/by-uuid/1d384605-a952-4bc1-8fa7-2ec70ce21814 ro
[    14.623] Build Date: 21 June 2010  12:01:49PM
[    14.623]  
[    14.623] Current version of pixman: 0.18.2
[    14.623]     Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
[    14.623] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    14.623] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 21 17:15:20 2010
[    14.624] (==) Using config file: "/etc/X11/xorg.conf"
[    14.624] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    14.625] (==) ServerLayout "aticonfig Layout"
[    14.625] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    14.625] (**) |   |-->Monitor "<default monitor>"
[    14.625] (**) |   |-->Device "aticonfig-Device[0]-0"
[    14.625] (==) No monitor specified for screen "aticonfig-Screen[0]-0".
    Using a default monitor configuration.
[    14.625] (==) Automatically adding devices
[    14.625] (==) Automatically enabling devices
[    14.629] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    14.629]     Entry deleted from font path.
[    14.631] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
[    14.631] (==) ModulePath set to "/usr/lib/xorg/modules"
[    14.631] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    14.631] (II) Loader magic: 0x7ce880
[    14.631] (II) Module ABI versions:
[    14.631]     X.Org ANSI C Emulation: 0.4
[    14.631]     X.Org Video Driver: 7.0
[    14.631]     X.Org XInput driver : 9.0
[    14.631]     X.Org Server Extension : 3.0
[    14.635] (--) PCI:*(0:2:0:0) 1002:68b8:1682:2990 ATI Technologies Inc Juniper [Radeon HD 5700 Series] rev 0, Mem @ 0xd0000000/268435456, 0xfbbc0000/131072, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
[    14.636] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    14.636] (II) "extmod" will be loaded by default.
[    14.636] (II) "dbe" will be loaded by default.
[    14.636] (II) "glx" will be loaded by default.
[    14.636] (II) "record" will be loaded by default.
[    14.636] (II) "dri" will be loaded by default.
[    14.636] (II) "dri2" will be loaded by default.
[    14.636] (II) LoadModule: "extmod"
[    14.638] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    14.639] (II) Module extmod: vendor="X.Org Foundation"
[    14.639]     compiled for 1.8.1.902, module version = 1.0.0
[    14.639]     Module class: X.Org Server Extension
[    14.639]     ABI class: X.Org Server Extension, version 3.0
[    14.639] (II) Loading extension MIT-SCREEN-SAVER
[    14.639] (II) Loading extension XFree86-VidModeExtension
[    14.639] (II) Loading extension XFree86-DGA
[    14.639] (II) Loading extension DPMS
[    14.639] (II) Loading extension XVideo
[    14.639] (II) Loading extension XVideo-MotionCompensation
[    14.639] (II) Loading extension X-Resource
[    14.639] (II) LoadModule: "dbe"
[    14.639] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    14.639] (II) Module dbe: vendor="X.Org Foundation"
[    14.639]     compiled for 1.8.1.902, module version = 1.0.0
[    14.639]     Module class: X.Org Server Extension
[    14.639]     ABI class: X.Org Server Extension, version 3.0
[    14.639] (II) Loading extension DOUBLE-BUFFER
[    14.639] (II) LoadModule: "glx"
[    14.640] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    14.642] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[    14.643]     compiled for 7.5.0, module version = 1.0.0
[    14.643] (II) Loading extension GLX
[    14.643] (II) LoadModule: "record"
[    14.643] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    14.643] (II) Module record: vendor="X.Org Foundation"
[    14.643]     compiled for 1.8.1.902, module version = 1.13.0
[    14.643]     Module class: X.Org Server Extension
[    14.643]     ABI class: X.Org Server Extension, version 3.0
[    14.643] (II) Loading extension RECORD
[    14.643] (II) LoadModule: "dri"
[    14.643] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    14.645] (II) Module dri: vendor="X.Org Foundation"
[    14.645]     compiled for 1.8.1.902, module version = 1.0.0
[    14.645]     ABI class: X.Org Server Extension, version 3.0
[    14.645] (II) Loading extension XFree86-DRI
[    14.645] (II) LoadModule: "dri2"
[    14.645] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    14.645] (II) Module dri2: vendor="X.Org Foundation"
[    14.645]     compiled for 1.8.1.902, module version = 1.2.0
[    14.645]     ABI class: X.Org Server Extension, version 3.0
[    14.645] (II) Loading extension DRI2
[    14.645] (II) LoadModule: "fglrx"
[    14.647] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    14.676] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    14.678]     compiled for 1.7.1, module version = 8.75.5
[    14.678]     Module class: X.Org Video Driver
[    14.680] (II) Loading sub module "fglrxdrm"
[    14.680] (II) LoadModule: "fglrxdrm"
[    14.680] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    14.681] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    14.681]     compiled for 1.7.1, module version = 8.75.5
[    14.681] (II) ATI Proprietary Linux Driver Version Identifier:8.75.5
[    14.681] (II) ATI Proprietary Linux Driver Release Identifier: 8.753                                
[    14.681] (II) ATI Proprietary Linux Driver Build Date: Jun 29 2010 22:08:06
[    14.681] (--) using VT number 7

[    14.683] (II) Primary Device is: PCI 02@00:00:0
[    14.683] (WW) Falling back to old probe method for fglrx
[    14.687] (II) Loading PCS database from /etc/ati/amdpcsdb
[    14.687] (--) Chipset Supported AMD Graphics Processor (0x68B8) found
[    14.688] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[    14.688] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    14.688] (II) AMD Video driver is signed
[    14.688] (II) fglrx(0): pEnt->device->identifier=0x23d91e0
[    14.688] (II) fglrx(0): === [atiddxPreInit] === begin
[    14.688] (II) Loading sub module "vgahw"
[    14.688] (II) LoadModule: "vgahw"
[    14.689] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    14.689] (II) Module vgahw: vendor="X.Org Foundation"
[    14.689]     compiled for 1.8.1.902, module version = 0.1.0
[    14.689]     ABI class: X.Org Video Driver, version 7.0
[    14.689] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    14.689] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    14.689] (==) fglrx(0): Default visual is TrueColor
[    14.689] (==) fglrx(0): RGB weight 888
[    14.689] (II) fglrx(0): Using 8 bits per RGB 
[    14.689] (==) fglrx(0): Buffer Tiling is ON
[    14.690] (II) Loading sub module "fglrxdrm"
[    14.690] (II) LoadModule: "fglrxdrm"
[    14.690] (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    14.691] ukiDynamicMajor: found major device number 251
[    14.691] ukiDynamicMajor: found major device number 251
[    14.691] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[    14.691] ukiOpenDevice: node name is /dev/ati/card0
[    14.691] ukiOpenDevice: open result is 10, (OK)
[    14.691] ukiOpenByBusid: ukiOpenMinor returns 10
[    14.691] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    14.691] (==) fglrx(0): NoAccel = NO
[    14.691] (**) fglrx(0): ATI 2D Acceleration Architecture disabled, using XAA
[    14.691] (--) fglrx(0): Chipset: "ATI Radeon HD 5700 Series" (Chipset = 0x68b8)
[    14.691] (--) fglrx(0): (PciSubVendor = 0x1682, PciSubDevice = 0x2990)
[    14.691] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    14.691] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[    14.691] (--) fglrx(0): MMIO registers at 0xfbbc0000
[    14.691] (--) fglrx(0): I/O port at 0x0000b000
[    14.691] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    14.692] (II) fglrx(0): AC Adapter is used
[    14.697] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    14.785] (II) Loading sub module "vbe"
[    14.785] (II) LoadModule: "vbe"
[    14.785] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    14.786] (II) Module vbe: vendor="X.Org Foundation"
[    14.786]     compiled for 1.8.1.902, module version = 1.1.0
[    14.786]     ABI class: X.Org Video Driver, version 7.0
[    14.786] (II) fglrx(0): VESA BIOS detected
[    14.786] (II) fglrx(0): VESA VBE Version 3.0
[    14.786] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    14.786] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    14.786] (II) fglrx(0): VESA VBE OEM Software Rev: 12.12
[    14.786] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    14.786] (II) fglrx(0): VESA VBE OEM Product: -113-C01002-101 
[    14.786] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    14.816] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    14.816] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[    14.816] (II) fglrx(0): PCIE card detected
[    14.816] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    14.816] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    14.817] (II) fglrx(0): Using adapter: 2:0.0.
[    14.849] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[    14.931] (II) fglrx(0): Interrupt handler installed at IRQ 75.
[    14.931] (II) fglrx(0): RandR 1.2 support is enabled!
[    14.931] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    14.931] (==) fglrx(0): Center Mode is disabled 
[    14.931] (II) Loading sub module "fb"
[    14.931] (II) LoadModule: "fb"
[    14.931] (II) Loading /usr/lib/xorg/modules/libfb.so
[    14.932] (II) Module fb: vendor="X.Org Foundation"
[    14.932]     compiled for 1.8.1.902, module version = 1.0.0
[    14.932]     ABI class: X.Org ANSI C Emulation, version 0.4
[    14.932] (II) Loading sub module "ddc"
[    14.932] (II) LoadModule: "ddc"
[    14.932] (II) Module "ddc" already built-in
[    15.179] (II) fglrx(0): Finished Initialize PPLIB!
[    15.180] (II) Loading sub module "ddc"
[    15.180] (II) LoadModule: "ddc"
[    15.180] (II) Module "ddc" already built-in
[    15.180] (II) fglrx(0): Connected Display0: DFP 4 [dfp4]
[    15.180] (II) fglrx(0): Display0 EDID data ---------------------------
[    15.180] (II) fglrx(0): Manufacturer: GSM  Model: 56ec  Serial#: 84648
[    15.180] (II) fglrx(0): Year: 2009  Week: 8
[    15.180] (II) fglrx(0): EDID Version: 1.3
[    15.180] (II) fglrx(0): Digital Display Input
[    15.180] (II) fglrx(0): Max Image Size [cm]: horiz.: 51  vert.: 28
[    15.180] (II) fglrx(0): Gamma: 2.20
[    15.180] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[    15.180] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    15.180] (II) fglrx(0): First detailed timing is preferred mode
[    15.180] (II) fglrx(0): redX: 0.644 redY: 0.336   greenX: 0.295 greenY: 0.614
[    15.180] (II) fglrx(0): blueX: 0.146 blueY: 0.072   whiteX: 0.313 whiteY: 0.329
[    15.180] (II) fglrx(0): Supported established timings:
[    15.180] (II) fglrx(0): 720x400@70Hz
[    15.180] (II) fglrx(0): 640x480@60Hz
[    15.180] (II) fglrx(0): 640x480@75Hz
[    15.180] (II) fglrx(0): 800x600@60Hz
[    15.180] (II) fglrx(0): 800x600@75Hz
[    15.180] (II) fglrx(0): 832x624@75Hz
[    15.180] (II) fglrx(0): 1024x768@60Hz
[    15.180] (II) fglrx(0): 1024x768@75Hz
[    15.180] (II) fglrx(0): 1280x1024@75Hz
[    15.180] (II) fglrx(0): 1152x864@75Hz
[    15.180] (II) fglrx(0): Manufacturer's mask: 0
[    15.180] (II) fglrx(0): Supported standard timings:
[    15.180] (II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    15.180] (II) fglrx(0): #1: hsize: 1280  vsize 1024  refresh: 75  vid: 36737
[    15.180] (II) fglrx(0): #2: hsize: 1152  vsize 864  refresh: 60  vid: 16497
[    15.180] (II) fglrx(0): #3: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    15.180] (II) fglrx(0): #4: hsize: 1280  vsize 960  refresh: 75  vid: 20353
[    15.180] (II) fglrx(0): #5: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    15.180] (II) fglrx(0): Supported detailed timing:
[    15.180] (II) fglrx(0): clock: 138.5 MHz   Image Size:  509 x 286 mm
[    15.180] (II) fglrx(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    15.180] (II) fglrx(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[    15.180] (II) fglrx(0): Supported detailed timing:
[    15.180] (II) fglrx(0): clock: 146.2 MHz   Image Size:  509 x 286 mm
[    15.180] (II) fglrx(0): h_active: 1680  h_sync: 1784  h_sync_end 1960 h_blank_end 2240 h_border: 0
[    15.180] (II) fglrx(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1089 v_border: 0
[    15.180] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 170 MHz
[    15.180] (II) fglrx(0): Monitor name: M237WD
[    15.180] (II) fglrx(0): EDID (in hex):
[    15.180] (II) fglrx(0):     00ffffffffffff001e6dec56a84a0100
[    15.180] (II) fglrx(0):     0813010380331c78eac9a5a4564b9d25
[    15.180] (II) fglrx(0):     125054a56b808180818f7140b300814f
[    15.180] (II) fglrx(0):     d1c0010101011a3680a070381f403020
[    15.180] (II) fglrx(0):     3500fd1e1100001a21399030621a2740
[    15.180] (II) fglrx(0):     68b03600fd1e1100001c000000fd0038
[    15.180] (II) fglrx(0):     4b1e5311000a202020202020000000fc
[    15.180] (II) fglrx(0):     004d32333757440a2020202020200076
[    15.180] (II) fglrx(0): End of Display0 EDID data --------------------
[    15.180] (II) fglrx(0): Connected Display1: CRT on secondary DAC [crt2]
[    15.180] (II) fglrx(0): Display1 EDID data ---------------------------
[    15.180] (II) fglrx(0): Manufacturer: SAM  Model: 193  Serial#: 1112092985
[    15.180] (II) fglrx(0): Year: 2005  Week: 41
[    15.180] (II) fglrx(0): EDID Version: 1.3
[    15.180] (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    15.180] (II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
[    15.180] (II) fglrx(0): Max Image Size [cm]: horiz.: 38  vert.: 30
[    15.180] (II) fglrx(0): Gamma: 2.20
[    15.180] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[    15.180] (II) fglrx(0): First detailed timing is preferred mode
[    15.180] (II) fglrx(0): redX: 0.640 redY: 0.329   greenX: 0.300 greenY: 0.600
[    15.180] (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    15.180] (II) fglrx(0): Supported established timings:
[    15.180] (II) fglrx(0): 720x400@70Hz
[    15.180] (II) fglrx(0): 640x480@60Hz
[    15.180] (II) fglrx(0): 640x480@67Hz
[    15.180] (II) fglrx(0): 640x480@72Hz
[    15.180] (II) fglrx(0): 640x480@75Hz
[    15.180] (II) fglrx(0): 800x600@56Hz
[    15.180] (II) fglrx(0): 800x600@60Hz
[    15.180] (II) fglrx(0): 800x600@72Hz
[    15.180] (II) fglrx(0): 800x600@75Hz
[    15.181] (II) fglrx(0): 832x624@75Hz
[    15.181] (II) fglrx(0): 1024x768@60Hz
[    15.181] (II) fglrx(0): 1024x768@70Hz
[    15.181] (II) fglrx(0): 1024x768@75Hz
[    15.181] (II) fglrx(0): 1280x1024@75Hz
[    15.181] (II) fglrx(0): 1152x864@75Hz
[    15.181] (II) fglrx(0): Manufacturer's mask: 0
[    15.181] (II) fglrx(0): Supported standard timings:
[    15.181] (II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    15.181] (II) fglrx(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    15.181] (II) fglrx(0): #2: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    15.181] (II) fglrx(0): Supported detailed timing:
[    15.181] (II) fglrx(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
[    15.181] (II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    15.181] (II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    15.181] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
[    15.181] (II) fglrx(0): Monitor name: SyncMaster
[    15.181] (II) fglrx(0): Serial No: HVEYA05396
[    15.181] (II) fglrx(0): EDID (in hex):
[    15.181] (II) fglrx(0):     00ffffffffffff004c2d930139314942
[    15.181] (II) fglrx(0):     290f01030e261e782ade95a3544c9926
[    15.181] (II) fglrx(0):     0f5054bfef8081808140714f01010101
[    15.181] (II) fglrx(0):     010101010101302a009851002a403070
[    15.181] (II) fglrx(0):     1300782d1100001e000000fd00384b1e
[    15.181] (II) fglrx(0):     510e000a202020202020000000fc0053
[    15.181] (II) fglrx(0):     796e634d61737465720a2020000000ff
[    15.181] (II) fglrx(0):     00485645594130353339360a202000db
[    15.181] (II) fglrx(0): End of Display1 EDID data --------------------
[    15.181] (II) fglrx(0): Output DFP1 has no monitor section
[    15.181] (II) fglrx(0): Output DFP2 has no monitor section
[    15.181] (II) fglrx(0): Output DFP3 has no monitor section
[    15.181] (II) fglrx(0): Output DFP4 using monitor section 0-DFP4
[    15.181] (**) fglrx(0): Option "PreferredMode" "1920x1080"
[    15.181] (**) fglrx(0): Option "Position" "1280 0"
[    15.181] (**) fglrx(0): Option "Disable" "false"
[    15.181] (**) fglrx(0): Option "Rotate" "normal"
[    15.181] (**) fglrx(0): Option "TargetRefresh" "60"
[    15.181] (II) fglrx(0): Output CRT1 has no monitor section
[    15.181] (II) fglrx(0): Output CRT2 using monitor section 0-CRT2
[    15.181] (**) fglrx(0): Option "PreferredMode" "1280x1024"
[    15.181] (**) fglrx(0): Option "Position" "0 658"
[    15.181] (**) fglrx(0): Option "Disable" "false"
[    15.181] (**) fglrx(0): Option "Rotate" "normal"
[    15.181] (**) fglrx(0): Option "TargetRefresh" "60"
[    15.199] (II) fglrx(0): Output DFP1 disconnected
[    15.199] (II) fglrx(0): Output DFP2 disconnected
[    15.199] (II) fglrx(0): Output DFP3 disconnected
[    15.199] (II) fglrx(0): Output DFP4 connected
[    15.199] (II) fglrx(0): Output CRT1 disconnected
[    15.199] (II) fglrx(0): Output CRT2 connected
[    15.199] (II) fglrx(0): Using user preference for initial modes
[    15.199] (II) fglrx(0): Output DFP4 using initial mode 1920x1080
[    15.199] (II) fglrx(0): Output CRT2 using initial mode 1280x1024
[    15.199] (II) fglrx(0): DPI set to (96, 96)
[    15.199] (II) fglrx(0): Eyefinity capable adapter detected.
[    15.199] (II) fglrx(0): Adapter ATI Radeon HD 5700 Series has 3 configurable heads and 2 displays connected.
[    15.199] (==) fglrx(0): QBS disabled
[    15.199] (==) fglrx(0):  PseudoColor visuals disabled
[    15.199] (II) Loading sub module "ramdac"
[    15.199] (II) LoadModule: "ramdac"
[    15.199] (II) Module "ramdac" already built-in
[    15.199] (==) fglrx(0): NoDRI = NO
[    15.199] (==) fglrx(0): Capabilities: 0x00000000
[    15.199] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    15.199] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    15.199] (==) fglrx(0): UseFastTLS=0
[    15.199] (==) fglrx(0): BlockSignalsOnLock=1
[    15.199] (--) Depth 24 pixmap format is 32 bpp
[    15.199] (II) Loading extension ATIFGLRXDRI
[    15.199] (II) fglrx(0): doing swlDriScreenInit
[    15.199] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    15.199] ukiDynamicMajor: found major device number 251
[    15.199] ukiDynamicMajor: found major device number 251
[    15.199] ukiDynamicMajor: found major device number 251
[    15.199] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[    15.199] ukiOpenDevice: node name is /dev/ati/card0
[    15.199] ukiOpenDevice: open result is 15, (OK)
[    15.199] ukiOpenByBusid: ukiOpenMinor returns 15
[    15.200] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    15.200] (II) fglrx(0): [uki] DRM interface version 1.0
[    15.200] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[    15.200] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    15.200] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f31785df000
[    15.200] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    15.200] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    15.200] (II) fglrx(0): swlDriScreenInit done
[    15.200] (II) fglrx(0): Kernel Module Version Information:
[    15.200] (II) fglrx(0):     Name: fglrx
[    15.200] (II) fglrx(0):     Version: 8.75.5
[    15.200] (II) fglrx(0):     Date: Jun 29 2010
[    15.200] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[    15.200] (II) fglrx(0): Kernel Module version matches driver.
[    15.200] (II) fglrx(0): Kernel Module Build Time Information:
[    15.200] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.35-rc6-rc
[    15.200] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    15.200] (II) fglrx(0):     Build-Kernel __SMP__:            no
[    15.200] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    15.200] (II) fglrx(0): [uki] register handle = 0x00004000
[    15.218] (II) fglrx(0): DRI initialization successfull!
[    15.219] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x02a30000
[    15.219] (II) fglrx(0): FBMM initialized for area (0,0)-(3200,3456)
[    15.219] (II) fglrx(0): FBMM auto alloc for area (0,0)-(3200,3200) (front color buffer - assumption)
[    15.219] (II) fglrx(0): Largest offscreen area available: 3200 x 256
[    15.220] (==) fglrx(0): Backing store disabled
[    15.220] (II) Loading extension FGLRXEXTENSION
[    15.220] (==) fglrx(0): DPMS enabled
[    15.220] (II) fglrx(0): Initialized in-driver Xinerama extension
[    15.220] (**) fglrx(0): Textured Video is enabled.
[    15.220] (II) LoadModule: "glesx"
[    15.220] (II) Loading /usr/lib/xorg/modules/glesx.so
[    15.234] (II) Module glesx: vendor="X.Org Foundation"
[    15.234]     compiled for 1.7.1, module version = 1.0.0
[    15.234] (II) Loading extension GLESX
[    15.234] (II) Loading sub module "xaa"
[    15.234] (II) LoadModule: "xaa"
[    15.234] (II) Loading /usr/lib/xorg/modules/libxaa.so
[    15.235] (II) Module xaa: vendor="X.Org Foundation"
[    15.235]     compiled for 1.8.1.902, module version = 1.2.1
[    15.235]     ABI class: X.Org Video Driver, version 7.0
[    15.235] (II) fglrx(0): GLESX enableFlags = 94
[    15.236] (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
[    15.236]     Screen to screen bit blits
[    15.236]     Solid filled rectangles
[    15.236]     Solid Horizontal and Vertical Lines
[    15.236]     Driver provided ScreenToScreenBitBlt replacement
[    15.236]     Driver provided FillSolidRects replacement
[    15.236] (II) fglrx(0): GLESX is enabled
[    15.236] (II) LoadModule: "amdxmm"
[    15.236] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    15.237] (II) Module amdxmm: vendor="X.Org Foundation"
[    15.237]     compiled for 1.7.1, module version = 1.0.0
[    15.238] (II) Loading extension AMDXVOPL
[    15.240] (II) fglrx(0): UVD2 feature is available
[    15.241] (II) fglrx(0): Enable composite support successfully
[    15.241] (II) fglrx(0): X context handle = 0x1
[    15.241] (II) fglrx(0): [DRI] installation complete
[    15.241] (==) fglrx(0): Silken mouse enabled
[    15.242] (==) fglrx(0): Using HW cursor of display infrastructure!
[    15.242] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    15.634] (II) fglrx(0): User Preference Output DFP4 using refresh rate 60.0 Hz.
[    15.660] (II) fglrx(0): User Preference Output CRT2 using refresh rate 60.0 Hz.
[    15.706] (--) RandR disabled
[    15.706] (II) Initializing built-in extension Generic Event Extension
[    15.706] (II) Initializing built-in extension SHAPE
[    15.706] (II) Initializing built-in extension MIT-SHM
[    15.706] (II) Initializing built-in extension XInputExtension
[    15.706] (II) Initializing built-in extension XTEST
[    15.706] (II) Initializing built-in extension BIG-REQUESTS
[    15.706] (II) Initializing built-in extension SYNC
[    15.706] (II) Initializing built-in extension XKEYBOARD
[    15.706] (II) Initializing built-in extension XC-MISC
[    15.706] (II) Initializing built-in extension SECURITY
[    15.706] (II) Initializing built-in extension XINERAMA
[    15.706] (II) Initializing built-in extension XFIXES
[    15.706] (II) Initializing built-in extension RENDER
[    15.706] (II) Initializing built-in extension RANDR
[    15.706] (II) Initializing built-in extension COMPOSITE
[    15.706] (II) Initializing built-in extension DAMAGE
[    15.707] ukiDynamicMajor: found major device number 251
[    15.707] ukiDynamicMajor: found major device number 251
[    15.707] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[    15.707] ukiOpenDevice: node name is /dev/ati/card0
[    15.707] ukiOpenDevice: open result is 16, (OK)
[    15.707] ukiOpenByBusid: ukiOpenMinor returns 16
[    15.707] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    15.830] (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
[    15.830] (II) GLX: Initialized DRI GL provider for screen 0
[    15.846] (II) fglrx(0): Enable the clock gating!
[    15.846] (II) fglrx(0): Setting screen physical size to 846 x 445
[    15.958] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    15.958] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    15.958] (II) LoadModule: "evdev"
[    15.958] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    15.959] (II) Module evdev: vendor="X.Org Foundation"
[    15.959]     compiled for 1.8.0, module version = 2.4.0
[    15.959]     Module class: X.Org XInput Driver
[    15.959]     ABI class: X.Org XInput driver, version 9.0
[    15.959] (**) Power Button: always reports core events
[    15.959] (**) Power Button: Device: "/dev/input/event1"
[    15.976] (II) Power Button: Found keys
[    15.976] (II) Power Button: Configuring as keyboard
[    15.976] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    15.976] (**) Option "xkb_rules" "evdev"
[    15.976] (**) Option "xkb_model" "evdev"
[    15.976] (**) Option "xkb_layout" "us"
[    16.009] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    16.009] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.009] (**) Power Button: always reports core events
[    16.009] (**) Power Button: Device: "/dev/input/event0"
[    16.033] (II) Power Button: Found keys
[    16.033] (II) Power Button: Configuring as keyboard
[    16.033] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    16.033] (**) Option "xkb_rules" "evdev"
[    16.033] (**) Option "xkb_model" "evdev"
[    16.033] (**) Option "xkb_layout" "us"
[    16.034] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event2)
[    16.034] (II) No input driver/identifier specified (ignoring)
[    16.036] (II) config/udev: Adding input device BTC USB Multimedia Keyboard (/dev/input/event3)
[    16.036] (**) BTC USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[    16.036] (**) BTC USB Multimedia Keyboard: always reports core events
[    16.036] (**) BTC USB Multimedia Keyboard: Device: "/dev/input/event3"
[    16.060] (II) BTC USB Multimedia Keyboard: Found keys
[    16.060] (II) BTC USB Multimedia Keyboard: Configuring as keyboard
[    16.060] (II) XINPUT: Adding extended input device "BTC USB Multimedia Keyboard" (type: KEYBOARD)
[    16.060] (**) Option "xkb_rules" "evdev"
[    16.060] (**) Option "xkb_model" "evdev"
[    16.060] (**) Option "xkb_layout" "us"
[    16.060] (II) config/udev: Adding input device BTC USB Multimedia Keyboard (/dev/input/event4)
[    16.060] (**) BTC USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[    16.060] (**) BTC USB Multimedia Keyboard: always reports core events
[    16.060] (**) BTC USB Multimedia Keyboard: Device: "/dev/input/event4"
[    16.087] (II) BTC USB Multimedia Keyboard: Found keys
[    16.087] (II) BTC USB Multimedia Keyboard: Configuring as keyboard
[    16.087] (II) XINPUT: Adding extended input device "BTC USB Multimedia Keyboard" (type: KEYBOARD)
[    16.087] (**) Option "xkb_rules" "evdev"
[    16.087] (**) Option "xkb_model" "evdev"
[    16.087] (**) Option "xkb_layout" "us"
[    16.087] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
[    16.087] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    16.087] (**) Logitech USB Optical Mouse: always reports core events
[    16.087] (**) Logitech USB Optical Mouse: Device: "/dev/input/event5"
[    16.120] (II) Logitech USB Optical Mouse: Found 3 mouse buttons
[    16.120] (II) Logitech USB Optical Mouse: Found scroll wheel(s)
[    16.120] (II) Logitech USB Optical Mouse: Found relative axes
[    16.120] (II) Logitech USB Optical Mouse: Found x and y relative axes
[    16.120] (II) Logitech USB Optical Mouse: Configuring as mouse
[    16.120] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    16.120] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    16.120] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
[    16.120] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[    16.120] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[    16.120] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    16.120] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    16.120] (II) Logitech USB Optical Mouse: initialized for relative axes.
[    16.120] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[    16.120] (II) No input driver/identifier specified (ignoring)
[    16.131] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    60.326] (II) fglrx(0): EDID vendor "SAM", prod id 403
[    60.326] (II) fglrx(0): Using EDID range info for horizontal sync
[    60.326] (II) fglrx(0): Using EDID range info for vertical refresh
[    60.326] (II) fglrx(0): Printing DDC gathered Modelines:
[    60.326] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    60.326] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    60.326] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    60.326] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    60.326] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    60.326] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    60.326] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    60.326] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    60.326] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    60.326] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    60.326] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    60.326] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    60.326] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    60.326] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    60.326] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    60.326] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    60.326] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    60.337] (II) fglrx(0): EDID vendor "SAM", prod id 403
[    60.337] (II) fglrx(0): Using hsync ranges from config file
[    60.337] (II) fglrx(0): Using vrefresh ranges from config file
[    60.337] (II) fglrx(0): Printing DDC gathered Modelines:
[    60.337] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    60.337] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    60.337] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    60.337] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    60.337] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    60.337] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    60.337] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    60.337] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    60.337] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    60.337] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    60.337] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    60.337] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    60.337] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    60.337] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    60.337] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    60.337] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    60.337] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    60.473] (II) fglrx(0): EDID vendor "SAM", prod id 403
[    60.473] (II) fglrx(0): Using hsync ranges from config file
[    60.473] (II) fglrx(0): Using vrefresh ranges from config file
[    60.473] (II) fglrx(0): Printing DDC gathered Modelines:
[    60.473] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    60.473] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    60.473] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    60.473] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    60.473] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    60.473] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    60.474] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    60.474] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    60.474] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    60.474] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    60.474] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    60.474] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    60.474] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    60.474] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    60.474] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    60.474] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    60.474] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    60.635] (II) fglrx(0): EDID vendor "SAM", prod id 403
[    60.635] (II) fglrx(0): Using hsync ranges from config file
[    60.635] (II) fglrx(0): Using vrefresh ranges from config file
[    60.635] (II) fglrx(0): Printing DDC gathered Modelines:
[    60.635] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    60.635] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    60.635] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    60.636] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    60.636] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    60.636] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    60.636] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    60.636] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    60.636] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    60.636] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    60.636] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    60.636] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    60.636] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    60.636] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    60.636] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    60.636] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    60.636] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    60.658] (II) fglrx(0): EDID vendor "SAM", prod id 403
[    60.658] (II) fglrx(0): Using hsync ranges from config file
[    60.658] (II) fglrx(0): Using vrefresh ranges from config file
[    60.658] (II) fglrx(0): Printing DDC gathered Modelines:
[    60.658] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    60.658] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    60.658] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    60.658] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    60.658] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    60.658] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    60.658] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    60.658] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    60.658] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    60.658] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    60.658] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    60.658] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    60.658] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    60.658] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    60.658] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    60.658] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    60.658] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    61.314] (II) fglrx(0): EDID vendor "SAM", prod id 403
[    61.314] (II) fglrx(0): Using hsync ranges from config file
[    61.314] (II) fglrx(0): Using vrefresh ranges from config file
[    61.314] (II) fglrx(0): Printing DDC gathered Modelines:
[    61.314] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    61.314] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    61.314] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    61.314] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    61.314] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    61.314] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    61.314] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    61.314] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    61.314] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    61.314] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    61.314] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    61.314] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    61.314] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    61.314] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    61.314] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    61.314] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    61.314] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    71.509] (II) fglrx(0): EDID vendor "SAM", prod id 403
[    71.509] (II) fglrx(0): Using hsync ranges from config file
[    71.509] (II) fglrx(0): Using vrefresh ranges from config file
[    71.509] (II) fglrx(0): Printing DDC gathered Modelines:
[    71.509] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    71.509] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    71.509] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    71.509] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    71.509] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    71.509] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    71.509] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    71.509] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    71.509] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    71.509] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    71.509] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    71.509] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    71.509] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    71.509] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    71.509] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    71.509] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    71.509] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    72.095] (II) fglrx(0): EDID vendor "SAM", prod id 403
[    72.095] (II) fglrx(0): Using hsync ranges from config file
[    72.095] (II) fglrx(0): Using vrefresh ranges from config file
[    72.095] (II) fglrx(0): Printing DDC gathered Modelines:
[    72.095] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    72.095] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    72.095] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    72.095] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    72.095] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    72.095] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    72.095] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    72.095] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    72.095] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    72.095] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    72.095] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    72.095] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    72.095] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    72.095] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    72.095] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    72.095] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    72.095] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    73.242] (II) fglrx(0): EDID vendor "SAM", prod id 403
[    73.242] (II) fglrx(0): Using hsync ranges from config file
[    73.242] (II) fglrx(0): Using vrefresh ranges from config file
[    73.242] (II) fglrx(0): Printing DDC gathered Modelines:
[    73.242] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    73.242] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    73.242] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    73.242] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    73.242] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    73.242] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    73.242] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    73.242] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    73.242] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    73.242] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    73.242] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    73.242] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    73.242] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    73.242] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    73.242] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    73.242] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    73.242] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    73.253] (II) fglrx(0): EDID vendor "SAM", prod id 403
[    73.253] (II) fglrx(0): Using hsync ranges from config file
[    73.253] (II) fglrx(0): Using vrefresh ranges from config file
[    73.253] (II) fglrx(0): Printing DDC gathered Modelines:
[    73.253] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    73.253] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    73.253] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    73.253] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    73.253] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    73.253] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    73.253] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    73.253] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    73.253] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    73.253] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    73.253] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    73.253] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    73.253] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    73.253] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    73.253] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    73.253] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    73.253] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    73.750] (II) fglrx(0): EDID vendor "GSM", prod id 22252
[    73.750] (II) fglrx(0): Using hsync ranges from config file
[    73.750] (II) fglrx(0): Using vrefresh ranges from config file
[    73.750] (II) fglrx(0): Printing DDC gathered Modelines:
[    73.750] (II) fglrx(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz)
[    73.750] (II) fglrx(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    73.750] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    73.750] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    73.750] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    73.750] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    73.750] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    73.750] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    73.750] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    73.750] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    73.750] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    73.750] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    73.750] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    73.750] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz)
[    73.750] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    73.750] (II) fglrx(0): Modeline "1280x960"x75.0  129.86  1280 1368 1504 1728  960 961 964 1002 -hsync +vsync (75.1 kHz)
[    73.750] (II) fglrx(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[    73.761] (II) fglrx(0): EDID vendor "GSM", prod id 22252
[    73.761] (II) fglrx(0): Using hsync ranges from config file
[    73.761] (II) fglrx(0): Using vrefresh ranges from config file
[    73.762] (II) fglrx(0): Printing DDC gathered Modelines:
[    73.762] (II) fglrx(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz)
[    73.762] (II) fglrx(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    73.762] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    73.762] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    73.762] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    73.762] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    73.762] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    73.762] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    73.762] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    73.762] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    73.762] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    73.762] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    73.762] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    73.762] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz)
[    73.762] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    73.762] (II) fglrx(0): Modeline "1280x960"x75.0  129.86  1280 1368 1504 1728  960 961 964 1002 -hsync +vsync (75.1 kHz)
[    73.762] (II) fglrx(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[    73.773] (II) fglrx(0): EDID vendor "GSM", prod id 22252
[    73.773] (II) fglrx(0): Using hsync ranges from config file
[    73.773] (II) fglrx(0): Using vrefresh ranges from config file
[    73.773] (II) fglrx(0): Printing DDC gathered Modelines:
[    73.773] (II) fglrx(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz)
[    73.773] (II) fglrx(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    73.773] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    73.773] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    73.773] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    73.773] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    73.773] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    73.773] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    73.773] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    73.773] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    73.773] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    73.773] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    73.773] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    73.773] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz)
[    73.773] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    73.773] (II) fglrx(0): Modeline "1280x960"x75.0  129.86  1280 1368 1504 1728  960 961 964 1002 -hsync +vsync (75.1 kHz)
[    73.773] (II) fglrx(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)

Here's dmesg | grep fgl:

fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 5768 MBytes.
[fglrx]   vendor: 1002 device: 68b8 count: 1
[fglrx] ioport: bar 4, base 0xb000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.75.5 [Jun 29 2010] with 1 minors
fglrx_pci 0000:02:00.0: irq 75 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 5225
[fglrx] IRQ 75 Enabled
[fglrx] Gart USWC size:1280 M.
[fglrx] Gart cacheable size:508 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000 
[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 

Last edited by mDuo13 (2010-08-22 01:35:10)

Offline

#2229 2010-08-22 05:35:24

agapito
Member
From: Who cares.
Registered: 2008-11-13
Posts: 641

Re: The AMD/ATI Bar & Grill

agapito wrote:
Vi0L0 wrote:

@agapito: lol... so i dunno... glxinfo isn't helping?

No hehe... At this moment X = 794MB and plasma desktop = 347MB

I guees i should restart X server frequently tongue

When i have some time maybe i will test with free driver.

I´ve tested with free driver and still have this problem. So is not catalyst related, i think is a kde4/qt problem.


Excuse my poor English.

Offline

#2230 2010-08-22 06:48:12

dcc24
Member
Registered: 2009-10-31
Posts: 732

Re: The AMD/ATI Bar & Grill

xorg-server 1.9.0 is out. I'm compiling now, will report any problems.

Also, I believe both backclear and backfill patches are non-problematic for quite some time now, so I won't be uploading an "xorg-server-1.9-catalyst-maximize-fix" to AUR. Vi0L0's version with the backclear patch is enough smile


It is better to keep your mouth shut and be thought a fool than to open it and remove all doubt. (Mark Twain)

My AUR packages

Offline

#2231 2010-08-22 07:29:32

dcc24
Member
Registered: 2009-10-31
Posts: 732

Re: The AMD/ATI Bar & Grill

Reporting back with results from my xorg-server 1.9.0 experience:

It doesn't work. Not even with the version number hack (tried reverting it back to 1.8.2). Here's the relevant part from Xorg.0.log:

[   116.773] (II) LoadModule: "fglrx"
[   116.773] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[   116.783] dlopen: /usr/lib/xorg/modules/drivers/fglrx_drv.so: undefined symbol: savedScreenInfo
[   116.827] (EE) Failed to load /usr/lib/xorg/modules/drivers/fglrx_drv.so
[   116.873] (II) UnloadModule: "fglrx"
[   116.873] (EE) Failed to load module "fglrx" (loader failed, 7)
[   116.919] (EE) No drivers available.
[   116.963] 
Fatal server error:
[   117.050] no screens found

I'm sure I'm missing something, but I've tried rebuilding catalyst, rmmod & modprobe fglrx but neither worked. Any ideas?

Last edited by dcc24 (2010-08-22 07:30:39)


It is better to keep your mouth shut and be thought a fool than to open it and remove all doubt. (Mark Twain)

My AUR packages

Offline

#2232 2010-08-22 11:38:56

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,349
Website

Re: The AMD/ATI Bar & Grill

mDuo13 wrote:

Interesting things here. I managed to connect to the system while it was locked. Here's what I found:
1. `free -m` reports over 1900mb free memory, so it's not strictly a memory leak like I previously thought it might be.
2. The first time I ran `top` it locked up my SSH session - nothing happened even when I pressed CTRL+C. After I closed the terminal window on my remote PC, I was able to SSH back to the machine again. A different time, the "sync" command locked up similarly and I had to close the ssh terminal and wait a while before connecting again. I was however able to reconnect after a short while.
3. I was able to killall wineserver and some other .exe processes that were running. However, I discovered that even if I did `kill -s KILL` with the PID of SC2.exe, it would not kill the process. It would simply return as if it had succeeded, but the process would still be there. This is the first I've seen -s KILL fail to actually kill something. I was similarly unable to kill X.
4. I was able to run `top` on my second try. It showed X using 100% of one CPU core, nothing else using more than a marginal amount of CPU.
5. ps ax shows that the SC2.exe process is in state "DL" which means "interruptible sleep, probably waiting for I/O". Meanwhile the X process is in currently running state. I was not able to restart X.
6. I was able to soft reboot the machine with `shutdown -r now`

LOL, pretty strange... Did you maybe try to /etc/rc.d/your_dm restart ?

mDuo13 wrote:

Here's xorg.0.log:
(...)
Here's dmesg | grep fgl:
(...)

Not good... both xserver and fglrx know nothing about hardlock sad.
Feel free to post bugreport at Unofficial ATI Linux Driver Bugzilla Main Page

Offline

#2233 2010-08-22 11:40:48

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,349
Website

Re: The AMD/ATI Bar & Grill

agapito wrote:
agapito wrote:
Vi0L0 wrote:

@agapito: lol... so i dunno... glxinfo isn't helping?

No hehe... At this moment X = 794MB and plasma desktop = 347MB

I guees i should restart X server frequently tongue

When i have some time maybe i will test with free driver.

I´ve tested with free driver and still have this problem. So is not catalyst related, i think is a kde4/qt problem.

Another reason why kde 4.5 is bad ;P

Offline

#2234 2010-08-22 11:52:42

agapito
Member
From: Who cares.
Registered: 2008-11-13
Posts: 641

Re: The AMD/ATI Bar & Grill

Vi0L0 wrote:
agapito wrote:
agapito wrote:

No hehe... At this moment X = 794MB and plasma desktop = 347MB

I guees i should restart X server frequently tongue

When i have some time maybe i will test with free driver.

I´ve tested with free driver and still have this problem. So is not catalyst related, i think is a kde4/qt problem.

Another reason why kde 4.5 is bad ;P

I am pretty sure i had this bug with old kde versions but before i had 8 gigs of ram and i didn't pay attention. With gnome-desktop i don't remember that Xorg high memory use.


Excuse my poor English.

Offline

#2235 2010-08-22 12:11:57

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,349
Website

Re: The AMD/ATI Bar & Grill

dcc24 wrote:

Reporting back with results from my xorg-server 1.9.0 experience:

It doesn't work. Not even with the version number hack (tried reverting it back to 1.8.2).
I'm sure I'm missing something, but I've tried rebuilding catalyst, rmmod & modprobe fglrx but neither worked. Any ideas?

You aren't missing anything. Catalyst isn't working with xserver 1.9 simply because it's not supporting it wink - xserver 1.9 got new ABI.
I'm sure i was writing about this problem. The good part of this story is that we don't need to wait for ages because of xserver 1.9 in ubuntu 10.10 smile.
Anyhow when new xserver will land in [extra] i will provide [xorg18] repo so we'll be able to use catalyst.
And yes - i'm pretty sure we won't see xserver 1.9 support before ubuntu 10.10 release.

Edit: Too bad that ATi Catalyst Beta Testing Program is closed sad - i would like to join it...

Last edited by Vi0L0 (2010-08-22 12:22:04)

Offline

#2236 2010-08-22 18:51:41

McFlow
Member
Registered: 2010-04-17
Posts: 58

Re: The AMD/ATI Bar & Grill

Hi again!
I have a serious problem now and I hope you can help me with it...
As I already posted some pages before Catalyst 10.5 is the latest version that runs on my system. I installed it from the catalyst-10.5 repo.I am not able to figure out why. Newer versions will cause Xorg to receive a segmentation fault.
I wanted to do a system upgrade, which also included a kernel update. It was not possible to update the kernel because clyde said the dependency of catalyst is kernel26<2.6.35.
I thought it's not clever to exclude the kernel from the update. So I removed the catalyst 10.5 driver to update my system. After I updated I thought I might give the newest Catalyst release a try. So I added the catalyst repo and put comments in front of the 10.5 repo.
I executed

clyde -Syy
clyde -Suu

and then I installed the catalyst package. I used the command

aticonfig --initial --force

to create my xorg.conf and rebooted my machine.
The Xserver did not start, as I almost expected. I have absolutely no idea why it does not work with any catalyst version newer than 10.5
On the internet they write the solution is to do it with aticonfig --initial or aticonfig --initial --force. I tried both... with existing xorg.conf and without. No success. I also removed catalyst, did X -configure, installed catalyst again and executed the aticonfig --initial again. Still no xserver. It crashes with a segmentation fault. I also read, that if it still fails, people should check that the correct BUSID is entered in the xorg.conf
So I did

02:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series]

So aticonfig set the busid correct as you can see below in the xorg.conf
By the way, if I set a different busid there is no segfault but xorg does not launch because of "No screens found"

Here is the content of /var/log/Xorg.0.log

[    17.636] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at [url]http://bugs.freedesktop.org[/url]/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See [url]http://wiki.x.org/wiki/GitPage[/url] for git access instructions.
[    17.636] 
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[    17.636] X Protocol Version 11, Revision 0
[    17.636] Build Operating System: Linux 2.6.34-ARCH x86_64 
[    17.636] Current Operating System: Linux mydell 2.6.35-ARCH #1 SMP PREEMPT Fri Aug 20 22:49:24 CEST 2010 x86_64
[    17.636] Kernel command line: root=/dev/disk/by-uuid/63e573bc-e052-4304-9e95-bf308f73f13d ro usbcore.autosuspend=1 nomodeset
[    17.637] Build Date: 21 June 2010  12:01:49PM
[    17.637]  
[    17.637] Current version of pixman: 0.18.4
[    17.637]     Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
[    17.637] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    17.637] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 22 19:33:47 2010
[    17.703] (==) Using config file: "/etc/X11/xorg.conf"
[    17.703] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    17.770] (==) ServerLayout "aticonfig Layout"
[    17.770] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    17.770] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    17.770] (**) |   |-->Device "aticonfig-Device[0]-0"
[    17.770] (==) Automatically adding devices
[    17.770] (==) Automatically enabling devices
[    17.851] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    17.851]     Entry deleted from font path.
[    17.937] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
[    17.937] (==) ModulePath set to "/usr/lib/xorg/modules"
[    17.937] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    17.937] (II) Loader magic: 0x7ce880
[    17.937] (II) Module ABI versions:
[    17.937]     X.Org ANSI C Emulation: 0.4
[    17.937]     X.Org Video Driver: 7.0
[    17.937]     X.Org XInput driver : 9.0
[    17.937]     X.Org Server Extension : 3.0
[    17.946] (--) PCI:*(0:2:0:0) 1002:9553:1028:0413 ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series] rev 0, Mem @ 0xd0000000/268435456, 0xcfef0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[    17.955] (II) Open ACPI successful (/var/run/acpid.socket)
[    17.955] (II) "extmod" will be loaded by default.
[    17.955] (II) "dbe" will be loaded by default.
[    17.955] (II) "glx" will be loaded by default.
[    17.955] (II) "record" will be loaded by default.
[    17.955] (II) "dri" will be loaded by default.
[    17.955] (II) "dri2" will be loaded by default.
[    17.955] (II) LoadModule: "extmod"
[    18.056] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    18.102] (II) Module extmod: vendor="X.Org Foundation"
[    18.102]     compiled for 1.8.1.902, module version = 1.0.0
[    18.102]     Module class: X.Org Server Extension
[    18.102]     ABI class: X.Org Server Extension, version 3.0
[    18.102] (II) Loading extension MIT-SCREEN-SAVER
[    18.102] (II) Loading extension XFree86-VidModeExtension
[    18.102] (II) Loading extension XFree86-DGA
[    18.102] (II) Loading extension DPMS
[    18.102] (II) Loading extension XVideo
[    18.102] (II) Loading extension XVideo-MotionCompensation
[    18.102] (II) Loading extension X-Resource
[    18.102] (II) LoadModule: "dbe"
[    18.102] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    18.116] (II) Module dbe: vendor="X.Org Foundation"
[    18.116]     compiled for 1.8.1.902, module version = 1.0.0
[    18.116]     Module class: X.Org Server Extension
[    18.116]     ABI class: X.Org Server Extension, version 3.0
[    18.116] (II) Loading extension DOUBLE-BUFFER
[    18.116] (II) LoadModule: "glx"
[    18.116] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    18.183] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[    18.190]     compiled for 7.5.0, module version = 1.0.0
[    18.190] (II) Loading extension GLX
[    18.190] (II) LoadModule: "record"
[    18.190] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    18.216] (II) Module record: vendor="X.Org Foundation"
[    18.216]     compiled for 1.8.1.902, module version = 1.13.0
[    18.216]     Module class: X.Org Server Extension
[    18.216]     ABI class: X.Org Server Extension, version 3.0
[    18.216] (II) Loading extension RECORD
[    18.216] (II) LoadModule: "dri"
[    18.216] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    18.246] (II) Module dri: vendor="X.Org Foundation"
[    18.246]     compiled for 1.8.1.902, module version = 1.0.0
[    18.246]     ABI class: X.Org Server Extension, version 3.0
[    18.246] (II) Loading extension XFree86-DRI
[    18.246] (II) LoadModule: "dri2"
[    18.247] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    18.260] (II) Module dri2: vendor="X.Org Foundation"
[    18.260]     compiled for 1.8.1.902, module version = 1.2.0
[    18.260]     ABI class: X.Org Server Extension, version 3.0
[    18.260] (II) Loading extension DRI2
[    18.260] (II) LoadModule: "fglrx"
[    18.279] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    18.724] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    18.752]     compiled for 1.7.1, module version = 8.75.5
[    18.753]     Module class: X.Org Video Driver
[    18.788] (II) Loading sub module "fglrxdrm"
[    18.788] (II) LoadModule: "fglrxdrm"
[    18.788] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    18.818] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    18.818]     compiled for 1.7.1, module version = 8.75.5
[    18.818] (II) ATI Proprietary Linux Driver Version Identifier:8.75.5
[    18.818] (II) ATI Proprietary Linux Driver Release Identifier: 8.753                                
[    18.818] (II) ATI Proprietary Linux Driver Build Date: Jun 29 2010 22:08:06
[    18.818] (++) using VT number 7

[    18.820] (II) Primary Device is: PCI 02@00:00:0
[    18.820] (WW) Falling back to old probe method for fglrx
[    18.915] (II) Loading PCS database from /etc/ati/amdpcsdb
[    18.916] (--) Chipset Supported AMD Graphics Processor (0x9553) found
[    18.916] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[    18.917] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    18.917] (II) AMD Video driver is signed
[    18.917] (II) fglrx(0): pEnt->device->identifier=0x1e3a6b0
[    18.917] (II) fglrx(0): === [atiddxPreInit] === begin
[    18.942] (II) Loading sub module "vgahw"
[    18.942] (II) LoadModule: "vgahw"
[    18.942] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    18.973] (II) Module vgahw: vendor="X.Org Foundation"
[    18.973]     compiled for 1.8.1.902, module version = 0.1.0
[    18.973]     ABI class: X.Org Video Driver, version 7.0
[    18.973] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    18.973] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    18.973] (==) fglrx(0): Default visual is TrueColor
[    18.973] (**) fglrx(0): Option "DPMS" "true"
[    18.973] (==) fglrx(0): RGB weight 888
[    18.973] (II) fglrx(0): Using 8 bits per RGB 
[    18.973] (==) fglrx(0): Buffer Tiling is ON
[    18.974] (II) Loading sub module "fglrxdrm"
[    18.974] (II) LoadModule: "fglrxdrm"
[    18.974] (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    18.976] ukiDynamicMajor: found major device number 252
[    18.976] ukiDynamicMajor: found major device number 252
[    18.976] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[    18.976] ukiOpenDevice: node name is /dev/ati/card0
[    18.976] ukiOpenDevice: open result is 11, (OK)
[    18.976] ukiOpenByBusid: ukiOpenMinor returns 11
[    18.976] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    18.977] (==) fglrx(0): NoAccel = NO
[    18.977] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[    18.977] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4500 Series" (Chipset = 0x9553)
[    18.977] (--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x0413)
[    18.977] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    18.977] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[    18.977] (--) fglrx(0): MMIO registers at 0xcfef0000
[    18.977] (--) fglrx(0): I/O port at 0x00002000
[    18.977] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    19.098] (II) fglrx(0): ATIF platform detected
[    19.201] (II) fglrx(0): AC Adapter is used
[    19.262] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    19.350] (II) Loading sub module "vbe"
[    19.350] (II) LoadModule: "vbe"
[    19.350] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    19.360] (II) Module vbe: vendor="X.Org Foundation"
[    19.360]     compiled for 1.8.1.902, module version = 1.1.0
[    19.360]     ABI class: X.Org Video Driver, version 7.0
[    19.360] (II) fglrx(0): VESA BIOS detected
[    19.360] (II) fglrx(0): VESA VBE Version 3.0
[    19.360] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    19.360] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    19.360] (II) fglrx(0): VESA VBE OEM Software Rev: 11.22
[    19.360] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    19.360] (II) fglrx(0): VESA VBE OEM Product: M92
[    19.360] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    19.395] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    19.395] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[    19.395] (II) fglrx(0): PCIE card detected
[    19.395] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    19.395] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    19.397] (II) fglrx(0): Using adapter: 2:0.0.
[    19.428] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[    19.482] (II) fglrx(0): Interrupt handler installed at IRQ 50.
[    19.482] (II) fglrx(0): RandR 1.2 support is enabled!
[    19.482] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    19.482] (==) fglrx(0): Center Mode is disabled 
[    19.482] (II) Loading sub module "fb"
[    19.482] (II) LoadModule: "fb"
[    19.482] (II) Loading /usr/lib/xorg/modules/libfb.so
[    19.510] (II) Module fb: vendor="X.Org Foundation"
[    19.510]     compiled for 1.8.1.902, module version = 1.0.0
[    19.510]     ABI class: X.Org ANSI C Emulation, version 0.4
[    19.510] (II) Loading sub module "ddc"
[    19.510] (II) LoadModule: "ddc"
[    19.510] (II) Module "ddc" already built-in
[    20.132] (II) fglrx(0): Finished Initialize PPLIB!
[    20.446] (II) Loading sub module "ddc"
[    20.446] (II) LoadModule: "ddc"
[    20.446] (II) Module "ddc" already built-in
[    20.446] (II) fglrx(0): Connected Display0: LCD on internal LVDS [lvds]
[    20.446] (II) fglrx(0): Display0 EDID data ---------------------------
[    20.446] (II) fglrx(0): Manufacturer: LGD  Model: 7001  Serial#: 0
[    20.446] (II) fglrx(0): Year: 2008  Week: 0
[    20.446] (II) fglrx(0): EDID Version: 1.3
[    20.446] (II) fglrx(0): Digital Display Input
[    20.446] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    20.447] (II) fglrx(0): Gamma: 2.20
[    20.447] (II) fglrx(0): No DPMS capabilities specified
[    20.447] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    20.447] (II) fglrx(0): First detailed timing is preferred mode
[    20.447] (II) fglrx(0): redX: 0.618 redY: 0.355   greenX: 0.335 greenY: 0.584
[    20.447] (II) fglrx(0): blueX: 0.150 blueY: 0.102   whiteX: 0.313 whiteY: 0.329
[    20.447] (II) fglrx(0): Manufacturer's mask: 0
[    20.447] (II) fglrx(0): Supported detailed timing:
[    20.447] (II) fglrx(0): clock: 72.3 MHz   Image Size:  344 x 194 mm
[    20.447] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    20.447] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    20.447] (II) fglrx(0): Supported detailed timing:
[    20.447] (II) fglrx(0): clock: 72.3 MHz   Image Size:  344 x 194 mm
[    20.447] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    20.447] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    20.447] (II) fglrx(0):  8PTNR€156WH2
[    20.447] (II) fglrx(0): Unknown vendor-specific block 0
[    20.447] (II) fglrx(0): EDID (in hex):
[    20.447] (II) fglrx(0):     00ffffffffffff0030e4017000000000
[    20.447] (II) fglrx(0):     00120103802213780a4e859e5b559526
[    20.447] (II) fglrx(0):     1a505400000001010101010101010101
[    20.447] (II) fglrx(0):     0101010101013e1c56a0500016303020
[    20.447] (II) fglrx(0):     350058c2100000193e1c56a050001630
[    20.447] (II) fglrx(0):     3020350058c210000019000000fe0038
[    20.447] (II) fglrx(0):     50544e52803135365748320a00000000
[    20.447] (II) fglrx(0):     00ffffffffffffffff01010a20200079
[    20.447] (II) fglrx(0): End of Display0 EDID data --------------------
[    20.456] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[    20.457] (II) fglrx(0): Output DFP2 has no monitor section
[    20.457] (II) fglrx(0): Output CRT2 has no monitor section
[    20.497] (II) fglrx(0): EDID vendor "LGD", prod id 28673
[    20.498] (II) fglrx(0): Printing DDC gathered Modelines:
[    20.498] (II) fglrx(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz)
[    20.498] (II) fglrx(0): Output LVDS connected
[    20.498] (II) fglrx(0): Output DFP2 disconnected
[    20.498] (II) fglrx(0): Output CRT2 disconnected
[    20.498] (II) fglrx(0): Using exact sizes for initial modes
[    20.498] (II) fglrx(0): Output LVDS using initial mode 1366x768
[    20.498] (II) fglrx(0): Display dimensions: (340, 190) mm
[    20.498] (II) fglrx(0): DPI set to (102, 102)
[    20.498] (II) fglrx(0): Adapter ATI Mobility Radeon HD 4500 Series has 2 configurable heads and 1 displays connected.
[    20.498] (==) fglrx(0): QBS disabled
[    20.498] (==) fglrx(0):  PseudoColor visuals disabled
[    20.498] (II) Loading sub module "ramdac"
[    20.498] (II) LoadModule: "ramdac"
[    20.498] (II) Module "ramdac" already built-in
[    20.498] (==) fglrx(0): NoDRI = NO
[    20.498] (==) fglrx(0): Capabilities: 0x00000000
[    20.498] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    20.498] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    20.498] (==) fglrx(0): UseFastTLS=0
[    20.498] (==) fglrx(0): BlockSignalsOnLock=1
[    20.498] (--) Depth 24 pixmap format is 32 bpp
[    20.498] (II) Loading extension ATIFGLRXDRI
[    20.498] (II) fglrx(0): doing swlDriScreenInit
[    20.498] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    20.498] ukiDynamicMajor: found major device number 252
[    20.498] ukiDynamicMajor: found major device number 252
[    20.498] ukiDynamicMajor: found major device number 252
[    20.498] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[    20.498] ukiOpenDevice: node name is /dev/ati/card0
[    20.498] ukiOpenDevice: open result is 16, (OK)
[    20.498] ukiOpenByBusid: ukiOpenMinor returns 16
[    20.498] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    20.498] (II) fglrx(0): [uki] DRM interface version 1.0
[    20.498] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[    20.498] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    20.498] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f0ccc331000
[    20.498] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    20.498] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    20.498] (II) fglrx(0): swlDriScreenInit done
[    20.498] (II) fglrx(0): Kernel Module Version Information:
[    20.498] (II) fglrx(0):     Name: fglrx
[    20.498] (II) fglrx(0):     Version: 8.75.5
[    20.498] (II) fglrx(0):     Date: Jun 29 2010
[    20.498] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[    20.498] (II) fglrx(0): Kernel Module version matches driver.
[    20.498] (II) fglrx(0): Kernel Module Build Time Information:
[    20.498] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.35-ARCH
[    20.499] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    20.499] (II) fglrx(0):     Build-Kernel __SMP__:            no
[    20.499] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    20.499] (II) fglrx(0): [uki] register handle = 0x00004000
[    20.519] (II) fglrx(0): Display width adjusted to to 1664 due to alignment constraints
[    20.519] (II) fglrx(0): DRI initialization successfull!
[    20.519] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010a8000
[    20.519] (II) fglrx(0): FBMM initialized for area (0,0)-(1664,2624)
[    20.519] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1664,1664) (front color buffer - assumption)
[    20.519] (II) fglrx(0): Largest offscreen area available: 1664 x 960
[    20.545] (==) fglrx(0): Backing store disabled
[    20.545] (II) Loading extension FGLRXEXTENSION
[    20.545] (**) fglrx(0): DPMS enabled
[    20.545] (II) fglrx(0): Initialized in-driver Xinerama extension
[    20.545] (**) fglrx(0): Textured Video is enabled.
[    20.545] (II) LoadModule: "glesx"
[    20.546] (II) Loading /usr/lib/xorg/modules/glesx.so
[    20.700] (II) Module glesx: vendor="X.Org Foundation"
[    20.700]     compiled for 1.7.1, module version = 1.0.0
[    20.700] (II) Loading extension GLESX
[    20.700] (II) fglrx(0): GLESX enableFlags = 528
[    20.700] (II) fglrx(0): GLESX is enabled
[    20.700] (II) fglrx(0): Acceleration enabled
[    20.700] (II) LoadModule: "amdxmm"
[    20.700] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    20.709] (II) Module amdxmm: vendor="X.Org Foundation"
[    20.709]     compiled for 1.7.1, module version = 1.0.0
[    20.709] (II) Loading extension AMDXVOPL
[    20.740] (II) fglrx(0): UVD2 feature is available
[    20.742] (II) fglrx(0): Enable composite support successfully
[    20.742] (WW) fglrx(0): Option "VendorName" is not used
[    20.742] (WW) fglrx(0): Option "ModelName" is not used
[    20.742] (II) fglrx(0): X context handle = 0x1
[    20.743] (II) fglrx(0): [DRI] installation complete
[    20.743] (==) fglrx(0): Silken mouse enabled
[    20.750] (==) fglrx(0): Using HW cursor of display infrastructure!
[    20.750] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    20.750] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[    20.750] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[    21.837] (--) RandR disabled
[    21.837] (II) Initializing built-in extension Generic Event Extension
[    21.837] (II) Initializing built-in extension SHAPE
[    21.837] (II) Initializing built-in extension MIT-SHM
[    21.837] (II) Initializing built-in extension XInputExtension
[    21.837] (II) Initializing built-in extension XTEST
[    21.837] (II) Initializing built-in extension BIG-REQUESTS
[    21.837] (II) Initializing built-in extension SYNC
[    21.837] (II) Initializing built-in extension XKEYBOARD
[    21.837] (II) Initializing built-in extension XC-MISC
[    21.837] (II) Initializing built-in extension SECURITY
[    21.837] (II) Initializing built-in extension XINERAMA
[    21.837] (II) Initializing built-in extension XFIXES
[    21.837] (II) Initializing built-in extension RENDER
[    21.837] (II) Initializing built-in extension RANDR
[    21.837] (II) Initializing built-in extension COMPOSITE
[    21.837] (II) Initializing built-in extension DAMAGE
[    21.839] ukiDynamicMajor: found major device number 252
[    21.839] ukiDynamicMajor: found major device number 252
[    21.839] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[    21.839] ukiOpenDevice: node name is /dev/ati/card0
[    21.839] ukiOpenDevice: open result is 17, (OK)
[    21.839] ukiOpenByBusid: ukiOpenMinor returns 17
[    21.839] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    22.561] 
Backtrace:
[    22.573] 0: /usr/bin/X (xorg_backtrace+0x28) [0x498588]
[    22.573] 1: /usr/bin/X (0x400000+0x672d9) [0x4672d9]
[    22.573] 2: /lib/libpthread.so.0 (0x7f0ccb67c000+0xf1c0) [0x7f0ccb68b1c0]
[    22.573] Segmentation fault at address (nil)
[    22.573] 
Fatal server error:
[    22.573] Caught signal 11 (Segmentation fault). Server aborting
[    22.573] 
[    22.573] 
Please consult the The X.Org Foundation support 
     at [url]http://wiki.x.org[/url]
 for help. 
[    22.573] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    22.573] 
[    22.585] (II) fglrx(0): Backup framebuffer data.
[    22.585] (II) fglrx(0): Backup complete.

And here is the xorg.conf I used:

Section "ServerLayout"
    Identifier     "aticonfig Layout"
    Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Module"
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[0]-0"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection

Section "Device"
    Identifier  "aticonfig-Device[0]-0"
    Driver      "fglrx"
    BusID       "PCI:2:0:0"
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device     "aticonfig-Device[0]-0"
    Monitor    "aticonfig-Monitor[0]-0"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

I would be veeeery very glad if someone could help me. It would also be ok for now if I can use catalyst 10.5... I cannot install it because of

:: catalyst: requires kernel26<2.6.35

Is there any way to work around this? Of course I would prefer getting the newer catalyst also to work but I would be happy with 10.5 as well.
Thank you so much already!

Offline

#2237 2010-08-22 19:18:21

webmasteryoda
Member
From: Serbia
Registered: 2010-03-20
Posts: 115
Website

Re: The AMD/ATI Bar & Grill

Well I managed to install Kernel 2.6.35 after deinstallation of Catalyst 10.5-2 from catalyst-10.5 repo, but now I have an old problem.
The thing is that I have some strange black squares around some windows and often in web browsers with flash player running. I solved this earlier after installing Catalyst 10.5-2, but now this problem appeared again.
Now, if I try to install it back I have this error:

warning: downgrading package catalyst (10.7-4 => 10.5-2)
resolving dependencies...
warning: cannot resolve "kernel26<2.6.35", a dependency of "catalyst"
:: the following package(s) cannot be upgraded due to unresolvable dependencies:
      catalyst

So, what now ? Is there some other version of this Catalyst or I am finally doomed with open source ATI which overheats my laptop ? Does new kernel fixes this issue with powersaving the GPU ?
Tnx inadvance


PS - I posted this on another topic, but it is closed, so I post here.

Offline

#2238 2010-08-22 19:44:33

webmasteryoda
Member
From: Serbia
Registered: 2010-03-20
Posts: 115
Website

Re: The AMD/ATI Bar & Grill

It seems I solved the problem. Here is what I have to do:


* Shutdown kdm/gdm/X11 etc
* Login as root on the console
* Execute aticonfig --set-pcs-str=DDX,ForceXAA,TRUE
* Restart

Taken from here:
http://ati.cchtml.com/show_bug.cgi?id=1845

Offline

#2239 2010-08-22 20:47:27

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,349
Website

Re: The AMD/ATI Bar & Grill

@McFlow:
I dunno how to help you with issues of newer catalysts...
If you made some search of this problem and found nothing - i think you should post bugreport at Unofficial ATI Linux Driver Bugzilla Main Page.
Edit: what if you will move /etc/ati/control from 10.5 to newer catalyst? smile
If you want to use catalyst 10.5 then use this PKGBUILD and other needed files to build package. To do this - download and extract mentioned archive, 'cd' it and 'makepkg -ci' it as privileged user.

Last edited by Vi0L0 (2010-08-22 21:04:06)

Offline

#2240 2010-08-22 20:50:32

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,349
Website

Re: The AMD/ATI Bar & Grill

@webmasteryoda:
it's really good to search at ATI Catalyst wiki at first wink

Offline

#2241 2010-08-22 21:45:05

McFlow
Member
Registered: 2010-04-17
Posts: 58

Re: The AMD/ATI Bar & Grill

Vi0L0 wrote:

@McFlow:
I dunno how to help you with issues of newer catalysts...
If you made some search of this problem and found nothing - i think you should post bugreport at Unofficial ATI Linux Driver Bugzilla Main Page.
Edit: what if you will move /etc/ati/control from 10.5 to newer catalyst? smile

Ok. I will post the Bugreport now.
When I moved the control from 10.5 to a newer catalyst it was still the same hmm
What's this file supposed to do?

If you want to use catalyst 10.5 then use this PKGBUILD and other needed files to build package. To do this - download and extract mentioned archive, 'cd' it and 'makepkg -ci' it as privileged user.

Thanks. That worked!

Last edited by McFlow (2010-08-22 22:05:29)

Offline

#2242 2010-08-22 22:16:33

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,349
Website

Re: The AMD/ATI Bar & Grill

McFlow wrote:

What's this file supposed to do?

I dunno what /etc/ati/control do exactly (it's binary file) smile , all i know is that this file contain a "list" of supported hardware (and guessing here: maybe it's telling to the driver how_to/in_what_way control each gpu)

Edit: Along with bugzilla report you may also post your bug here (surprisingly they've got ArchLinux on the short list of unsupported distributions cool )

Last edited by Vi0L0 (2010-08-22 22:35:24)

Offline

#2243 2010-08-24 23:38:04

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,349
Website

Re: The AMD/ATI Bar & Grill

xserver 1.9 landed in testing repo, so here is fresh and new smile [xorg18] repo:

For i686 systems:

   [xorg18]
   Server = http://catalyst.apocalypsus.net/repo/xorg18/i686

For x86_64 systems:

   [xorg18]
   Server = http://catalyst.apocalypsus.net/repo/xorg18/x86_64

Last edited by Vi0L0 (2010-08-25 00:09:57)

Offline

#2244 2010-08-25 08:08:20

Perry3D
Member
Registered: 2008-03-20
Posts: 553

Re: The AMD/ATI Bar & Grill

But why is it called xorg18 and not xorg19?

Offline

#2245 2010-08-25 08:10:58

dcc24
Member
Registered: 2009-10-31
Posts: 732

Re: The AMD/ATI Bar & Grill

Uhm... because it has xorg-server 1.8 in it? catalyst is not compatible with xorg-server 1.9 yet, so that's why this repo exists.


It is better to keep your mouth shut and be thought a fool than to open it and remove all doubt. (Mark Twain)

My AUR packages

Offline

#2246 2010-08-25 16:07:20

Radioactiveman
Member
From: Germany
Registered: 2010-05-13
Posts: 388

Re: The AMD/ATI Bar & Grill

Catalyst 10.8 released: Changelog
Is is not yet available on amd.com but here.

Edit: I still get black boxes in Thunderbird and amdcccle shows I would use 10.7 ... :-/

Last edited by Radioactiveman (2010-08-25 17:34:52)

Offline

#2247 2010-08-25 19:04:03

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,349
Website

Re: The AMD/ATI Bar & Grill

Thank you Radioactiveman smile

Aur and repo have been updated, like i said on aur:
I can see NO changes except OpenGL ES 2.0 and some not_so_important fixes
Just noticed: blur in kde4.5 is kinda working good now.

2 important notes:

If you are using libva and xvba-video packages then you need to reinstall them, and type this as root:
rm /usr/lib/xorg/modules/dri/*_drv_video.so

__catalyst isn't supporting xorg-server 1.9___ which just landed in [testing] repo and soon will be pushed to mainline
To avoid black screen use [xorg18] repository:
http://wiki.archlinux.org/index.php/ATI … repository

Offline

#2248 2010-08-25 21:06:52

yimm
Member
From: France
Registered: 2009-10-16
Posts: 106

Re: The AMD/ATI Bar & Grill

There is not artefact under firefox 4, contrary to firefox 3 with catalyst 10.7. I will try with 10.8.

Offline

#2249 2010-08-26 08:20:17

mits
Member
From: Bucharest/Romania
Registered: 2008-01-10
Posts: 129

Re: The AMD/ATI Bar & Grill

Kde 4.5 is blazing fast/responsive with catalyst 10.8. - Radeon HD4570 on dell 1555

yimm wrote:

There is not artefact under firefox 4, contrary to firefox 3 with catalyst 10.7. I will try with 10.8

No artefact (yet) under firefox 4 with catalyst 10.8 and is fast too.

Last edited by mits (2010-08-26 08:24:18)

Offline

#2250 2010-08-26 09:39:30

yimm
Member
From: France
Registered: 2009-10-16
Posts: 106

Re: The AMD/ATI Bar & Grill

mits wrote:

No artefact (yet) under firefox 4 with catalyst 10.8 and is fast too.

I confirm, I have just tried wink

mits wrote:

Kde 4.5 is blazing fast/responsive with catalyst 10.8. - Radeon HD4570 on dell 1555

Yes, but there is always a little latency by launching dolphin, konqueror... but I think it's a KDE problem.

Offline

Board footer

Powered by FluxBB