You are not logged in.

#2301 2010-08-31 08:02:13

Gillian00
Member
From: Belgium
Registered: 2010-05-25
Posts: 100

Re: The AMD/ATI Bar & Grill

Vi0L0 wrote:

I'm gonna post you my PKGBUILD for newest chromium-dev in minutes so you may build it,
Edit: PKGBUILD with other needed files is here. Note that you need to download ~124M fat sources archive file to build it.
And maybe i'll also upload a package for x86_64 (within a ~10 minutes).
Edit: ok, here's the package, it's only ~16M fat, but i'm not promising it will work - maybe linker linked some specific for my system libs.

so, which package ?   chromium-dev from aur is ok or I absolutely have to take one of this package ??


thank you for your work again smile


Dell Studio XPS 1647 | i5-560m | 4go ddr3 | ATI radeon mobility 4670HD 1go gddr3 | Seagate Momentus 7200.4 G-force | wled 1600x900

Offline

#2302 2010-08-31 13:38:29

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,299
Website

Re: The AMD/ATI Bar & Grill

Gillian00 wrote:
Vi0L0 wrote:

I'm gonna post you my PKGBUILD for newest chromium-dev in minutes so you may build it,
Edit: PKGBUILD with other needed files is here. Note that you need to download ~124M fat sources archive file to build it.
And maybe i'll also upload a package for x86_64 (within a ~10 minutes).
Edit: ok, here's the package, it's only ~16M fat, but i'm not promising it will work - maybe linker linked some specific for my system libs.

so, which package ?   chromium-dev from aur is ok or I absolutely have to take one of this package ??

This new functionality was introduced on the blog entry, and it's dated 27 Aug.
Now the chromium-dev on aur is older - version 7.0.503.1 showed on 25 Aug. I didn't even try to build it - I just used newest version 7.0.509.0 (i can see there's already 7.0.510.0 uploaded today) and posted here about what's working for me. Plus please note that this functionality is fresh - there's not many information about it and i've found no information about it on arch forums - because of this lack of informations i haven't risked possible waste of time (long compilation) on building 2 packages - older and newest - and just built newest package.
Anyhow if you've built chromium-dev from aur and gpu acceleration is working there then don't even mind to update.

Offline

#2303 2010-08-31 13:44:44

Gillian00
Member
From: Belgium
Registered: 2010-05-25
Posts: 100

Re: The AMD/ATI Bar & Grill

ok smile thank for your answer.   And it works with actual chromium-dev from Aur


Dell Studio XPS 1647 | i5-560m | 4go ddr3 | ATI radeon mobility 4670HD 1go gddr3 | Seagate Momentus 7200.4 G-force | wled 1600x900

Offline

#2304 2010-09-01 10:50:26

LeCrayonVert
Member
Registered: 2010-09-01
Posts: 133

Re: The AMD/ATI Bar & Grill

Hi !
Can anyone confirm this bug (with VLC 1.1.4 and Catalyst 10.7) >> http://trac.videolan.org/vlc/ticket/4121 ?

Thanks wink


I believe in a world I can and do understand. A rational universe, explained through rational means.

Offline

#2305 2010-09-01 15:58:28

CmdKewin
Member
Registered: 2010-09-01
Posts: 6

Re: The AMD/ATI Bar & Grill

Hi everyone,

I'm not sure if it the correct forum (nor topic...), but I'm guessing my problem is related in someway to the Catalyst Driver (or to my xorg.conf)

I have a nice two monitors setup on my work laptop, a 17 inch screen + 19 inch screen with a grand total virtual space of  1924x2880.

From some time now (I can't exactly recall when it all started)  windows and desktop icons started behaving strangely:

1.
screen1

With Docky, the below area SHOULD not be used by icons (like when there's a gnome panlel) At first I tought something was wrong with Docky, but even when it's not running, same behaviour.

2.

screen2n.png

Any popup window stays "below" the top main panel

It's a minor thing, I know (you can always kill windows from Docky without relying on the top left close button), but it's starting to become somewhat irritating smile

Anybody got a solution or point me in the direction where I could find one (aside from the obvious "search button")?

Thank you in advance.

p.s.: below is my xorg.conf (X.Org X Server 1.8.1.902 (1.8.2 RC 2)), with latest catalyst from repo.

Section "ServerLayout"
    Identifier     "aticonfig Layout"
    Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Module"
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[0]-0"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection

Section "Device"
    Identifier  "aticonfig-Device[0]-0"
    Driver      "fglrx"
    BusID       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device     "aticonfig-Device[0]-0"
    Monitor    "aticonfig-Monitor[0]-0"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
        Virtual      2880 1924
    EndSubSection
EndSection

Offline

#2306 2010-09-01 20:36:59

lman
Member
From: CZ
Registered: 2007-12-18
Posts: 252

Re: The AMD/ATI Bar & Grill

Hi all,

Does anyone has a working configuration with compiz running. Could you share the settings, pls?

I have currently installed catalyst 10.8, compiz with direct rendering, backclear patched xorg. And Xorg crashes after a while if I try to run other opengl app sad
I tried removing xorg.conf, forcing XAA, still crashing sad

[    15.665] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[    15.665] 
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[    15.665] X Protocol Version 11, Revision 0
[    15.665] Build Operating System: Linux 2.6.34-ARCH x86_64 
[    15.665] Current Operating System: Linux a05-0139a 2.6.35-11628-gc9f9e91-dirty #1 SMP PREEMPT Sat Aug 21 01:53:15 CEST 2010 x86_64
[    15.665] Kernel command line: root=/dev/disk/by-uuid/1f1a4ac3-a98d-4178-ad96-62db09fc7492 ro nomodeset
[    15.665] Build Date: 22 June 2010  02:59:03PM
[    15.665]  
[    15.665] Current version of pixman: 0.18.4
[    15.665]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    15.665] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.665] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep  1 22:27:16 2010
[    15.767] (==) Using config file: "/etc/X11/xorg.conf"
[    15.767] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    15.817] (==) ServerLayout "aticonfig Layout"
[    15.817] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    15.817] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    15.817] (**) |   |-->Device "aticonfig-Device[0]-0"
[    15.817] (==) Automatically adding devices
[    15.817] (==) Automatically enabling devices
[    15.833] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    15.833]     Entry deleted from font path.
[    15.846] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
[    15.846] (==) ModulePath set to "/usr/lib/xorg/modules"
[    15.846] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    15.846] (II) Loader magic: 0x7cd2e0
[    15.846] (II) Module ABI versions:
[    15.846]     X.Org ANSI C Emulation: 0.4
[    15.846]     X.Org Video Driver: 7.0
[    15.846]     X.Org XInput driver : 9.0
[    15.846]     X.Org Server Extension : 3.0
[    15.850] (--) PCI:*(0:1:0:0) 1002:9442:1043:026a ATI Technologies Inc RV770 [Radeon HD 4850] rev 0, Mem @ 0xd0000000/268435456, 0xe5000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
[    15.850] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    15.850] (II) "extmod" will be loaded by default.
[    15.850] (II) "dbe" will be loaded by default.
[    15.850] (II) "glx" will be loaded by default.
[    15.850] (II) "record" will be loaded by default.
[    15.850] (II) "dri" will be loaded by default.
[    15.850] (II) "dri2" will be loaded by default.
[    15.850] (II) LoadModule: "extmod"
[    15.903] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    15.973] (II) Module extmod: vendor="X.Org Foundation"
[    15.973]     compiled for 1.8.1.902, module version = 1.0.0
[    15.973]     Module class: X.Org Server Extension
[    15.973]     ABI class: X.Org Server Extension, version 3.0
[    15.973] (II) Loading extension MIT-SCREEN-SAVER
[    15.973] (II) Loading extension XFree86-VidModeExtension
[    15.973] (II) Loading extension XFree86-DGA
[    15.973] (II) Loading extension DPMS
[    15.973] (II) Loading extension XVideo
[    15.973] (II) Loading extension XVideo-MotionCompensation
[    15.973] (II) Loading extension X-Resource
[    15.973] (II) LoadModule: "dbe"
[    15.973] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    15.992] (II) Module dbe: vendor="X.Org Foundation"
[    15.992]     compiled for 1.8.1.902, module version = 1.0.0
[    15.992]     Module class: X.Org Server Extension
[    15.992]     ABI class: X.Org Server Extension, version 3.0
[    15.992] (II) Loading extension DOUBLE-BUFFER
[    15.992] (II) LoadModule: "glx"
[    15.992] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    16.032] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[    16.081]     compiled for 7.5.0, module version = 1.0.0
[    16.082] (II) Loading extension GLX
[    16.082] (II) LoadModule: "record"
[    16.082] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    16.146] (II) Module record: vendor="X.Org Foundation"
[    16.156]     compiled for 1.8.1.902, module version = 1.13.0
[    16.156]     Module class: X.Org Server Extension
[    16.156]     ABI class: X.Org Server Extension, version 3.0
[    16.156] (II) Loading extension RECORD
[    16.156] (II) LoadModule: "dri"
[    16.156] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    16.237] (II) Module dri: vendor="X.Org Foundation"
[    16.237]     compiled for 1.8.1.902, module version = 1.0.0
[    16.237]     ABI class: X.Org Server Extension, version 3.0
[    16.237] (II) Loading extension XFree86-DRI
[    16.237] (II) LoadModule: "dri2"
[    16.237] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    16.244] (II) Module dri2: vendor="X.Org Foundation"
[    16.244]     compiled for 1.8.1.902, module version = 1.2.0
[    16.244]     ABI class: X.Org Server Extension, version 3.0
[    16.244] (II) Loading extension DRI2
[    16.244] (II) LoadModule: "fglrx"
[    16.471] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    16.590] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    16.597]     compiled for 1.7.1, module version = 8.76.7
[    16.597]     Module class: X.Org Video Driver
[    16.612] (II) Loading sub module "fglrxdrm"
[    16.612] (II) LoadModule: "fglrxdrm"
[    16.612] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    16.626] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    16.626]     compiled for 1.7.1, module version = 8.76.7
[    16.626] (II) ATI Proprietary Linux Driver Version Identifier:8.76.7
[    16.626] (II) ATI Proprietary Linux Driver Release Identifier: 8.762                                
[    16.626] (II) ATI Proprietary Linux Driver Build Date: Aug  3 2010 21:16:31
[    16.626] (++) using VT number 7

[    16.627] (II) Primary Device is: PCI 01@00:00:0
[    16.627] (WW) Falling back to old probe method for fglrx
[    16.677] (II) Loading PCS database from /etc/ati/amdpcsdb
[    16.683] (--) Chipset Supported AMD Graphics Processor (0x9442) found
[    16.683] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    16.683] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    16.683] (II) AMD Video driver is signed
[    16.684] (II) fglrx(0): pEnt->device->identifier=0x2013490
[    16.684] (II) fglrx(0): === [atiddxPreInit] === begin
[    16.684] (II) Loading sub module "vgahw"
[    16.684] (II) LoadModule: "vgahw"
[    16.684] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    16.696] (II) Module vgahw: vendor="X.Org Foundation"
[    16.696]     compiled for 1.8.1.902, module version = 0.1.0
[    16.696]     ABI class: X.Org Video Driver, version 7.0
[    16.697] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    16.697] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    16.697] (==) fglrx(0): Default visual is TrueColor
[    16.697] (**) fglrx(0): Option "DPMS" "true"
[    16.697] (==) fglrx(0): RGB weight 888
[    16.697] (II) fglrx(0): Using 8 bits per RGB 
[    16.697] (==) fglrx(0): Buffer Tiling is ON
[    16.704] (II) Loading sub module "fglrxdrm"
[    16.704] (II) LoadModule: "fglrxdrm"
[    16.704] (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    16.705] ukiDynamicMajor: found major device number 252
[    16.705] ukiDynamicMajor: found major device number 252
[    16.705] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    16.705] ukiOpenDevice: node name is /dev/ati/card0
[    16.705] ukiOpenDevice: open result is 10, (OK)
[    16.705] ukiOpenByBusid: ukiOpenMinor returns 10
[    16.705] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    16.705] (==) fglrx(0): NoAccel = NO
[    16.705] (**) fglrx(0): ATI 2D Acceleration Architecture disabled, using XAA
[    16.705] (--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series        " (Chipset = 0x9442)
[    16.705] (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x026a)
[    16.705] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    16.705] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[    16.705] (--) fglrx(0): MMIO registers at 0xe5000000
[    16.705] (--) fglrx(0): I/O port at 0x0000a000
[    16.705] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    16.709] (II) fglrx(0): AC Adapter is used
[    16.715] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    16.787] (II) Loading sub module "vbe"
[    16.787] (II) LoadModule: "vbe"
[    16.787] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    16.805] (II) Module vbe: vendor="X.Org Foundation"
[    16.805]     compiled for 1.8.1.902, module version = 1.1.0
[    16.805]     ABI class: X.Org Video Driver, version 7.0
[    16.805] (II) fglrx(0): VESA BIOS detected
[    16.805] (II) fglrx(0): VESA VBE Version 3.0
[    16.805] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    16.805] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    16.805] (II) fglrx(0): VESA VBE OEM Software Rev: 11.3
[    16.805] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    16.805] (II) fglrx(0): VESA VBE OEM Product: RV770
[    16.805] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    16.845] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    16.846] (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR3
[    16.846] (II) fglrx(0): PCIE card detected
[    16.846] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    16.846] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    16.847] (II) fglrx(0): Using adapter: 1:0.0.
[    16.879] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[    16.896] (II) fglrx(0): Interrupt handler installed at IRQ 47.
[    16.896] (II) fglrx(0): RandR 1.2 support is enabled!
[    16.896] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    16.896] (==) fglrx(0): Center Mode is disabled 
[    16.897] (II) Loading sub module "fb"
[    16.897] (II) LoadModule: "fb"
[    16.897] (II) Loading /usr/lib/xorg/modules/libfb.so
[    16.926] (II) Module fb: vendor="X.Org Foundation"
[    16.926]     compiled for 1.8.1.902, module version = 1.0.0
[    16.926]     ABI class: X.Org ANSI C Emulation, version 0.4
[    16.926] (II) Loading sub module "ddc"
[    16.926] (II) LoadModule: "ddc"
[    16.926] (II) Module "ddc" already built-in
[    24.310] (II) fglrx(0): Finished Initialize PPLIB!
[    24.343] (II) Loading sub module "ddc"
[    24.343] (II) LoadModule: "ddc"
[    24.343] (II) Module "ddc" already built-in
[    24.343] (II) fglrx(0): Connected Display0: DFP on secondary TMDS [tmds2i]
[    24.343] (II) fglrx(0): Display0 EDID data ---------------------------
[    24.343] (II) fglrx(0): Manufacturer: HWP  Model: 26a9  Serial#: 16843009
[    24.343] (II) fglrx(0): Year: 2008  Week: 27
[    24.343] (II) fglrx(0): EDID Version: 1.3
[    24.343] (II) fglrx(0): Digital Display Input
[    24.343] (II) fglrx(0): Max Image Size [cm]: horiz.: 47  vert.: 30
[    24.343] (II) fglrx(0): Gamma: 2.20
[    24.343] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[    24.343] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    24.343] (II) fglrx(0): Default color space is primary color space
[    24.343] (II) fglrx(0): First detailed timing is preferred mode
[    24.343] (II) fglrx(0): redX: 0.646 redY: 0.339   greenX: 0.290 greenY: 0.603
[    24.343] (II) fglrx(0): blueX: 0.145 blueY: 0.065   whiteX: 0.313 whiteY: 0.329
[    24.343] (II) fglrx(0): Supported established timings:
[    24.343] (II) fglrx(0): 720x400@70Hz
[    24.343] (II) fglrx(0): 640x480@60Hz
[    24.343] (II) fglrx(0): 640x480@75Hz
[    24.343] (II) fglrx(0): 800x600@60Hz
[    24.343] (II) fglrx(0): 800x600@75Hz
[    24.343] (II) fglrx(0): 832x624@75Hz
[    24.343] (II) fglrx(0): 1024x768@60Hz
[    24.343] (II) fglrx(0): 1024x768@75Hz
[    24.343] (II) fglrx(0): 1280x1024@75Hz
[    24.343] (II) fglrx(0): 1152x864@75Hz
[    24.343] (II) fglrx(0): Manufacturer's mask: 0
[    24.343] (II) fglrx(0): Supported standard timings:
[    24.343] (II) fglrx(0): #0: hsize: 1152  vsize 720  refresh: 60  vid: 113
[    24.343] (II) fglrx(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    24.343] (II) fglrx(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    24.343] (II) fglrx(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    24.343] (II) fglrx(0): #4: hsize: 1600  vsize 1000  refresh: 60  vid: 169
[    24.343] (II) fglrx(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    24.343] (II) fglrx(0): Supported detailed timing:
[    24.343] (II) fglrx(0): clock: 146.2 MHz   Image Size:  473 x 296 mm
[    24.343] (II) fglrx(0): h_active: 1680  h_sync: 1784  h_sync_end 1960 h_blank_end 2240 h_border: 0
[    24.343] (II) fglrx(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1089 v_border: 0
[    24.343] (II) fglrx(0): Ranges: V min: 48 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 160 MHz
[    24.343] (II) fglrx(0): Monitor name: HP w2207
[    24.343] (II) fglrx(0): Serial No: CZQ827051P
[    24.343] (II) fglrx(0): Supported detailed timing:
[    24.343] (II) fglrx(0): clock: 27.0 MHz   Image Size:  473 x 296 mm
[    24.343] (II) fglrx(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[    24.343] (II) fglrx(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[    24.343] (II) fglrx(0): Supported detailed timing:
[    24.343] (II) fglrx(0): clock: 27.0 MHz   Image Size:  473 x 296 mm
[    24.343] (II) fglrx(0): h_active: 720  h_sync: 732  h_sync_end 796 h_blank_end 864 h_border: 0
[    24.343] (II) fglrx(0): v_active: 576  v_sync: 581  v_sync_end 586 v_blanking: 625 v_border: 0
[    24.343] (II) fglrx(0): Supported detailed timing:
[    24.343] (II) fglrx(0): clock: 74.2 MHz   Image Size:  473 x 296 mm
[    24.343] (II) fglrx(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    24.343] (II) fglrx(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[    24.343] (II) fglrx(0): Supported detailed timing:
[    24.343] (II) fglrx(0): clock: 74.2 MHz   Image Size:  473 x 296 mm
[    24.343] (II) fglrx(0): h_active: 1280  h_sync: 1720  h_sync_end 1760 h_blank_end 1980 h_border: 0
[    24.343] (II) fglrx(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    24.343] (II) fglrx(0): Supported detailed timing:
[    24.343] (II) fglrx(0): clock: 74.2 MHz   Image Size:  473 x 296 mm
[    24.343] (II) fglrx(0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
[    24.343] (II) fglrx(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[    24.343] (II) fglrx(0): Number of EDID sections to follow: 1
[    24.343] (II) fglrx(0): EDID (in hex):
[    24.343] (II) fglrx(0):     00ffffffffffff0022f0a92601010101
[    24.343] (II) fglrx(0):     1b120103802f1e78eeb535a5564a9a25
[    24.343] (II) fglrx(0):     105054a56b807100814081809500a900
[    24.343] (II) fglrx(0):     b3000101010121399030621a274068b0
[    24.343] (II) fglrx(0):     3600d9281100001c000000fd00304c18
[    24.343] (II) fglrx(0):     5310000a202020202020000000fc0048
[    24.343] (II) fglrx(0):     502077323230370a20202020000000ff
[    24.343] (II) fglrx(0):     00435a51383237303531500a202001ed
[    24.344] (II) fglrx(0): End of Display0 EDID data --------------------
[    24.795] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[    24.795] (II) fglrx(0): Output DFP2 has no monitor section
[    24.795] (II) fglrx(0): Output CRT1 has no monitor section
[    24.795] (II) fglrx(0): Output CRT2 has no monitor section
[    24.795] (II) fglrx(0): Output TV has no monitor section
[    24.795] (II) fglrx(0): Output COMPONENT_VIDEO has no monitor section
[    25.308] (II) fglrx(0): Output DFP1 disconnected
[    25.308] (II) fglrx(0): Output DFP2 connected
[    25.308] (II) fglrx(0): Output CRT1 disconnected
[    25.308] (II) fglrx(0): Output CRT2 disconnected
[    25.308] (II) fglrx(0): Output TV disconnected
[    25.308] (II) fglrx(0): Output COMPONENT_VIDEO disconnected
[    25.308] (II) fglrx(0): Using exact sizes for initial modes
[    25.308] (II) fglrx(0): Output DFP2 using initial mode 1680x1050
[    25.308] (II) fglrx(0): DPI set to (96, 96)
[    25.309] (II) fglrx(0): Adapter ATI Radeon HD 4800 Series         has 2 configurable heads and 1 displays connected.
[    25.309] (==) fglrx(0): QBS disabled
[    25.309] (==) fglrx(0):  PseudoColor visuals disabled
[    25.309] (II) Loading sub module "ramdac"
[    25.309] (II) LoadModule: "ramdac"
[    25.309] (II) Module "ramdac" already built-in
[    25.309] (==) fglrx(0): NoDRI = NO
[    25.309] (==) fglrx(0): Capabilities: 0x00000000
[    25.309] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    25.309] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    25.309] (==) fglrx(0): UseFastTLS=0
[    25.309] (==) fglrx(0): BlockSignalsOnLock=1
[    25.309] (--) Depth 24 pixmap format is 32 bpp
[    25.310] (II) Loading extension ATIFGLRXDRI
[    25.310] (II) fglrx(0): doing swlDriScreenInit
[    25.310] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    25.310] ukiDynamicMajor: found major device number 252
[    25.310] ukiDynamicMajor: found major device number 252
[    25.310] ukiDynamicMajor: found major device number 252
[    25.310] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    25.310] ukiOpenDevice: node name is /dev/ati/card0
[    25.310] ukiOpenDevice: open result is 15, (OK)
[    25.310] ukiOpenByBusid: ukiOpenMinor returns 15
[    25.310] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    25.310] (II) fglrx(0): [uki] DRM interface version 1.0
[    25.310] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    25.310] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    25.310] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fb2be92f000
[    25.310] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    25.310] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    25.310] (II) fglrx(0): swlDriScreenInit done
[    25.311] (II) fglrx(0): Kernel Module Version Information:
[    25.311] (II) fglrx(0):     Name: fglrx
[    25.311] (II) fglrx(0):     Version: 8.76.7
[    25.311] (II) fglrx(0):     Date: Aug  3 2010
[    25.311] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[    25.311] (II) fglrx(0): Kernel Module version matches driver.
[    25.311] (II) fglrx(0): Kernel Module Build Time Information:
[    25.311] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.35-11628-gc9f9e91-dirty
[    25.311] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    25.311] (II) fglrx(0):     Build-Kernel __SMP__:            no
[    25.311] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    25.311] (II) fglrx(0): [uki] register handle = 0x00004000
[    25.584] (II) fglrx(0): DRI initialization successfull!
[    25.604] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01068000
[    25.608] (II) fglrx(0): FBMM initialized for area (0,0)-(1920,2240)
[    25.608] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1920,1920) (front color buffer - assumption)
[    25.608] (II) fglrx(0): Largest offscreen area available: 1920 x 320
[    25.788] (==) fglrx(0): Backing store disabled
[    25.788] (II) Loading extension FGLRXEXTENSION
[    25.788] (**) fglrx(0): DPMS enabled
[    25.789] (II) fglrx(0): Initialized in-driver Xinerama extension
[    25.789] (**) fglrx(0): Textured Video is enabled.
[    25.789] (II) LoadModule: "glesx"
[    25.789] (II) Loading /usr/lib/xorg/modules/glesx.so
[    26.008] (II) Module glesx: vendor="X.Org Foundation"
[    26.008]     compiled for 1.7.1, module version = 1.0.0
[    26.008] (II) Loading extension GLESX
[    26.008] (II) Loading sub module "xaa"
[    26.008] (II) LoadModule: "xaa"
[    26.008] (II) Loading /usr/lib/xorg/modules/libxaa.so
[    26.024] (II) Module xaa: vendor="X.Org Foundation"
[    26.024]     compiled for 1.8.1.902, module version = 1.2.1
[    26.024]     ABI class: X.Org Video Driver, version 7.0
[    26.024] (II) fglrx(0): GLESX enableFlags = 94
[    26.025] (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
[    26.025]     Screen to screen bit blits
[    26.025]     Solid filled rectangles
[    26.025]     Solid Horizontal and Vertical Lines
[    26.025]     Driver provided ScreenToScreenBitBlt replacement
[    26.025]     Driver provided FillSolidRects replacement
[    26.025] (II) fglrx(0): GLESX is enabled
[    26.025] (II) LoadModule: "amdxmm"
[    26.026] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    26.033] (II) Module amdxmm: vendor="X.Org Foundation"
[    26.033]     compiled for 1.7.1, module version = 1.0.0
[    26.033] (II) Loading extension AMDXVOPL
[    26.049] (II) fglrx(0): UVD2 feature is available
[    26.065] (II) fglrx(0): Enable composite support successfully
[    26.065] (WW) fglrx(0): Option "VendorName" is not used
[    26.065] (WW) fglrx(0): Option "ModelName" is not used
[    26.065] (II) fglrx(0): X context handle = 0x1
[    26.065] (II) fglrx(0): [DRI] installation complete
[    26.065] (==) fglrx(0): Silken mouse enabled
[    26.065] (==) fglrx(0): Using HW cursor of display infrastructure!
[    26.065] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    26.065] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
[    26.065] (II) fglrx(0): Cannot set TV horizontal size.
[    26.065] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed. 
[    26.065] (II) fglrx(0): Cannot set TV horizontal position.
[    26.065] (II) fglrx(0): Cannot set TV vertical position.
[    26.247] (--) RandR disabled
[    26.247] (II) Initializing built-in extension Generic Event Extension
[    26.247] (II) Initializing built-in extension SHAPE
[    26.247] (II) Initializing built-in extension MIT-SHM
[    26.247] (II) Initializing built-in extension XInputExtension
[    26.247] (II) Initializing built-in extension XTEST
[    26.247] (II) Initializing built-in extension BIG-REQUESTS
[    26.247] (II) Initializing built-in extension SYNC
[    26.247] (II) Initializing built-in extension XKEYBOARD
[    26.247] (II) Initializing built-in extension XC-MISC
[    26.247] (II) Initializing built-in extension SECURITY
[    26.247] (II) Initializing built-in extension XINERAMA
[    26.247] (II) Initializing built-in extension XFIXES
[    26.247] (II) Initializing built-in extension RENDER
[    26.247] (II) Initializing built-in extension RANDR
[    26.247] (II) Initializing built-in extension COMPOSITE
[    26.247] (II) Initializing built-in extension DAMAGE
[    26.249] ukiDynamicMajor: found major device number 252
[    26.249] ukiDynamicMajor: found major device number 252
[    26.249] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    26.249] ukiOpenDevice: node name is /dev/ati/card0
[    26.249] ukiOpenDevice: open result is 16, (OK)
[    26.249] ukiOpenByBusid: ukiOpenMinor returns 16
[    26.249] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    27.282] (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
[    27.282] (II) GLX: Initialized DRI GL provider for screen 0
[    27.382] (II) fglrx(0): Enable the clock gating!
[    27.382] (II) fglrx(0): Setting screen physical size to 444 x 277
[    27.883] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    27.883] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    27.883] (II) LoadModule: "evdev"
[    27.884] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.884] (II) Module evdev: vendor="X.Org Foundation"
[    27.884]     compiled for 1.8.1.902, module version = 2.4.0
[    27.884]     Module class: X.Org XInput Driver
[    27.884]     ABI class: X.Org XInput driver, version 9.0
[    27.884] (**) Power Button: always reports core events
[    27.884] (**) Power Button: Device: "/dev/input/event1"
[    27.914] (II) Power Button: Found keys
[    27.914] (II) Power Button: Configuring as keyboard
[    27.914] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    27.914] (**) Option "xkb_rules" "evdev"
[    27.914] (**) Option "xkb_model" "evdev"
[    27.914] (**) Option "xkb_layout" "us"
[    27.945] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    27.945] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    27.945] (**) Power Button: always reports core events
[    27.945] (**) Power Button: Device: "/dev/input/event0"
[    27.960] (II) Power Button: Found keys
[    27.960] (II) Power Button: Configuring as keyboard
[    27.960] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    27.960] (**) Option "xkb_rules" "evdev"
[    27.960] (**) Option "xkb_model" "evdev"
[    27.960] (**) Option "xkb_layout" "us"
[    27.963] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[    27.963] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    27.963] (**) Logitech USB Receiver: always reports core events
[    27.963] (**) Logitech USB Receiver: Device: "/dev/input/event2"
[    27.987] (II) Logitech USB Receiver: Found keys
[    27.987] (II) Logitech USB Receiver: Configuring as keyboard
[    27.987] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[    27.987] (**) Option "xkb_rules" "evdev"
[    27.987] (**) Option "xkb_model" "evdev"
[    27.987] (**) Option "xkb_layout" "us"
[    27.987] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[    27.987] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    27.987] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    27.987] (**) Logitech USB Receiver: always reports core events
[    27.987] (**) Logitech USB Receiver: Device: "/dev/input/event3"
[    28.011] (II) Logitech USB Receiver: Found 12 mouse buttons
[    28.011] (II) Logitech USB Receiver: Found scroll wheel(s)
[    28.011] (II) Logitech USB Receiver: Found relative axes
[    28.011] (II) Logitech USB Receiver: Found x and y relative axes
[    28.011] (II) Logitech USB Receiver: Found absolute axes
[    28.011] (II) Logitech USB Receiver: Found keys
[    28.011] (II) Logitech USB Receiver: Configuring as mouse
[    28.011] (II) Logitech USB Receiver: Configuring as keyboard
[    28.011] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    28.011] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    28.011] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[    28.011] (**) Option "xkb_rules" "evdev"
[    28.011] (**) Option "xkb_model" "evdev"
[    28.011] (**) Option "xkb_layout" "us"
[    28.011] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    28.011] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    28.011] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    28.011] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    28.011] (II) Logitech USB Receiver: initialized for relative axes.
[    28.011] (WW) Logitech USB Receiver: ignoring absolute axes.
[    28.011] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    28.011] (II) No input driver/identifier specified (ignoring)
[    28.065] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    30.199] (II) fglrx(0): EDID vendor "HWP", prod id 9897
[    30.199] (II) fglrx(0): Using EDID range info for horizontal sync
[    30.199] (II) fglrx(0): Using EDID range info for vertical refresh
[    30.199] (II) fglrx(0): Printing DDC gathered Modelines:
[    30.199] (II) fglrx(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    30.199] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
[    30.199] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz)
[    30.199] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[    30.199] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz)
[    30.199] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[    30.199] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    30.199] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    30.199] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    30.199] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    30.199] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    30.199] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    30.199] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    30.199] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    30.199] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    30.199] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    30.199] (II) fglrx(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz)
[    30.199] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    30.199] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    30.199] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz)
[    30.199] (II) fglrx(0): Modeline "1600x1000"x60.0  133.14  1600 1704 1872 2144  1000 1001 1004 1035 -hsync +vsync (62.1 kHz)
[    30.199] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    30.199] (II) fglrx(0): Modeline "1440x240"x0.0   27.00  1440 1478 1602 1716  240 244 247 262 -hsync -vsync (15.7 kHz)
[    30.199] (II) fglrx(0): Modeline "1440x288"x0.0   27.00  1440 1464 1590 1728  288 290 293 312 -hsync -vsync (15.6 kHz)
[    30.199] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz)
[    30.420] (WW) fglrx(0): Cannot get updated TV attributes.
[    30.475] (II) fglrx(0): EDID vendor "HWP", prod id 9897
[    30.475] (II) fglrx(0): Using hsync ranges from config file
[    30.475] (II) fglrx(0): Using vrefresh ranges from config file
[    30.475] (II) fglrx(0): Printing DDC gathered Modelines:
[    30.475] (II) fglrx(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    30.475] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
[    30.475] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz)
[    30.475] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[    30.475] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz)
[    30.475] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[    30.475] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    30.475] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    30.475] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    30.475] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    30.475] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    30.475] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    30.475] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    30.475] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    30.475] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    30.475] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    30.475] (II) fglrx(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz)
[    30.475] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    30.475] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    30.475] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz)
[    30.475] (II) fglrx(0): Modeline "1600x1000"x60.0  133.14  1600 1704 1872 2144  1000 1001 1004 1035 -hsync +vsync (62.1 kHz)
[    30.475] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    30.475] (II) fglrx(0): Modeline "1440x240"x0.0   27.00  1440 1478 1602 1716  240 244 247 262 -hsync -vsync (15.7 kHz)
[    30.475] (II) fglrx(0): Modeline "1440x288"x0.0   27.00  1440 1464 1590 1728  288 290 293 312 -hsync -vsync (15.6 kHz)
[    30.475] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz)
[    30.639] (WW) fglrx(0): Cannot get updated TV attributes.
[    30.703] (II) fglrx(0): EDID vendor "HWP", prod id 9897
[    30.703] (II) fglrx(0): Using hsync ranges from config file
[    30.703] (II) fglrx(0): Using vrefresh ranges from config file
[    30.703] (II) fglrx(0): Printing DDC gathered Modelines:
[    30.703] (II) fglrx(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    30.703] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
[    30.703] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz)
[    30.703] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[    30.703] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz)
[    30.703] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[    30.703] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    30.703] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    30.703] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    30.703] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    30.703] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    30.703] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    30.703] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    30.703] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    30.703] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    30.703] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    30.703] (II) fglrx(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz)
[    30.703] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    30.703] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    30.703] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz)
[    30.703] (II) fglrx(0): Modeline "1600x1000"x60.0  133.14  1600 1704 1872 2144  1000 1001 1004 1035 -hsync +vsync (62.1 kHz)
[    30.703] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    30.703] (II) fglrx(0): Modeline "1440x240"x0.0   27.00  1440 1478 1602 1716  240 244 247 262 -hsync -vsync (15.7 kHz)
[    30.703] (II) fglrx(0): Modeline "1440x288"x0.0   27.00  1440 1464 1590 1728  288 290 293 312 -hsync -vsync (15.6 kHz)
[    30.703] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz)
[    30.868] (WW) fglrx(0): Cannot get updated TV attributes.
[    38.625] (II) fglrx(0): EDID vendor "HWP", prod id 9897
[    38.625] (II) fglrx(0): Using hsync ranges from config file
[    38.625] (II) fglrx(0): Using vrefresh ranges from config file
[    38.625] (II) fglrx(0): Printing DDC gathered Modelines:
[    38.625] (II) fglrx(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    38.625] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
[    38.625] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz)
[    38.625] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[    38.625] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz)
[    38.625] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[    38.625] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    38.625] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    38.625] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    38.625] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    38.625] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    38.625] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    38.625] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    38.625] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    38.625] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    38.625] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    38.625] (II) fglrx(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz)
[    38.625] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    38.626] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    38.626] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz)
[    38.626] (II) fglrx(0): Modeline "1600x1000"x60.0  133.14  1600 1704 1872 2144  1000 1001 1004 1035 -hsync +vsync (62.1 kHz)
[    38.626] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    38.626] (II) fglrx(0): Modeline "1440x240"x0.0   27.00  1440 1478 1602 1716  240 244 247 262 -hsync -vsync (15.7 kHz)
[    38.626] (II) fglrx(0): Modeline "1440x288"x0.0   27.00  1440 1464 1590 1728  288 290 293 312 -hsync -vsync (15.6 kHz)
[    38.626] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz)
[    38.790] (WW) fglrx(0): Cannot get updated TV attributes.
[    38.845] (II) fglrx(0): EDID vendor "HWP", prod id 9897
[    38.845] (II) fglrx(0): Using hsync ranges from config file
[    38.845] (II) fglrx(0): Using vrefresh ranges from config file
[    38.845] (II) fglrx(0): Printing DDC gathered Modelines:
[    38.845] (II) fglrx(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    38.845] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
[    38.845] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz)
[    38.845] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[    38.845] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz)
[    38.845] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[    38.845] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    38.845] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    38.845] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    38.845] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    38.845] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    38.845] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    38.845] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    38.845] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    38.845] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    38.845] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    38.845] (II) fglrx(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz)
[    38.845] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    38.845] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    38.845] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz)
[    38.845] (II) fglrx(0): Modeline "1600x1000"x60.0  133.14  1600 1704 1872 2144  1000 1001 1004 1035 -hsync +vsync (62.1 kHz)
[    38.845] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    38.845] (II) fglrx(0): Modeline "1440x240"x0.0   27.00  1440 1478 1602 1716  240 244 247 262 -hsync -vsync (15.7 kHz)
[    38.845] (II) fglrx(0): Modeline "1440x288"x0.0   27.00  1440 1464 1590 1728  288 290 293 312 -hsync -vsync (15.6 kHz)
[    38.845] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz)
[    39.009] (WW) fglrx(0): Cannot get updated TV attributes.
[    39.063] (II) fglrx(0): EDID vendor "HWP", prod id 9897
[    39.063] (II) fglrx(0): Using hsync ranges from config file
[    39.063] (II) fglrx(0): Using vrefresh ranges from config file
[    39.064] (II) fglrx(0): Printing DDC gathered Modelines:
[    39.064] (II) fglrx(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    39.064] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
[    39.064] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz)
[    39.064] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[    39.064] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz)
[    39.064] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[    39.064] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    39.064] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    39.064] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    39.064] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    39.064] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    39.064] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    39.064] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    39.064] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    39.064] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    39.064] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    39.064] (II) fglrx(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz)
[    39.064] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    39.064] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    39.064] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz)
[    39.064] (II) fglrx(0): Modeline "1600x1000"x60.0  133.14  1600 1704 1872 2144  1000 1001 1004 1035 -hsync +vsync (62.1 kHz)
[    39.064] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    39.064] (II) fglrx(0): Modeline "1440x240"x0.0   27.00  1440 1478 1602 1716  240 244 247 262 -hsync -vsync (15.7 kHz)
[    39.064] (II) fglrx(0): Modeline "1440x288"x0.0   27.00  1440 1464 1590 1728  288 290 293 312 -hsync -vsync (15.6 kHz)
[    39.064] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz)
[    39.228] (WW) fglrx(0): Cannot get updated TV attributes.
[    43.373] (II) fglrx(0): EDID vendor "HWP", prod id 9897
[    43.463] (II) fglrx(0): Using hsync ranges from config file
[    43.463] (II) fglrx(0): Using vrefresh ranges from config file
[    43.463] (II) fglrx(0): Printing DDC gathered Modelines:
[    43.463] (II) fglrx(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    43.463] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
[    43.463] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz)
[    43.463] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[    43.463] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz)
[    43.463] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[    43.463] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    43.463] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    43.463] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    43.463] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    43.463] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    43.463] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    43.463] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    43.463] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    43.463] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    43.463] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    43.463] (II) fglrx(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz)
[    43.463] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    43.463] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    43.463] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz)
[    43.463] (II) fglrx(0): Modeline "1600x1000"x60.0  133.14  1600 1704 1872 2144  1000 1001 1004 1035 -hsync +vsync (62.1 kHz)
[    43.463] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    43.463] (II) fglrx(0): Modeline "1440x240"x0.0   27.00  1440 1478 1602 1716  240 244 247 262 -hsync -vsync (15.7 kHz)
[    43.463] (II) fglrx(0): Modeline "1440x288"x0.0   27.00  1440 1464 1590 1728  288 290 293 312 -hsync -vsync (15.6 kHz)
[    43.463] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz)
[    43.628] (WW) fglrx(0): Cannot get updated TV attributes.
[    45.749] (II) fglrx(0): EDID vendor "HWP", prod id 9897
[    45.749] (II) fglrx(0): Using hsync ranges from config file
[    45.749] (II) fglrx(0): Using vrefresh ranges from config file
[    45.749] (II) fglrx(0): Printing DDC gathered Modelines:
[    45.749] (II) fglrx(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    45.749] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
[    45.749] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz)
[    45.749] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[    45.749] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz)
[    45.749] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[    45.749] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    45.749] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    45.749] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    45.749] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    45.749] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    45.749] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    45.749] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    45.749] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    45.749] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    45.749] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    45.749] (II) fglrx(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz)
[    45.749] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    45.749] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    45.749] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz)
[    45.749] (II) fglrx(0): Modeline "1600x1000"x60.0  133.14  1600 1704 1872 2144  1000 1001 1004 1035 -hsync +vsync (62.1 kHz)
[    45.749] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    45.749] (II) fglrx(0): Modeline "1440x240"x0.0   27.00  1440 1478 1602 1716  240 244 247 262 -hsync -vsync (15.7 kHz)
[    45.749] (II) fglrx(0): Modeline "1440x288"x0.0   27.00  1440 1464 1590 1728  288 290 293 312 -hsync -vsync (15.6 kHz)
[    45.749] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz)
[   115.943] 
Backtrace:
[   115.963] 0: /usr/bin/Xorg (xorg_backtrace+0x28) [0x49e388]
[   115.963] 1: /usr/bin/Xorg (0x400000+0x5f939) [0x45f939]
[   115.963] 2: /lib/libpthread.so.0 (0x7fb2bdc7a000+0xf1c0) [0x7fb2bdc891c0]
[   115.963] 3: /usr/lib/xorg/modules/extensions/libextmod.so (0x7fb2bbf05000+0x12249) [0x7fb2bbf17249]
[   115.963] 4: /usr/bin/Xorg (0x400000+0x2d2dc) [0x42d2dc]
[   115.963] 5: /usr/bin/Xorg (0x400000+0x2173a) [0x42173a]
[   115.963] 6: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7fb2bcc0dc4d]
[   115.963] 7: /usr/bin/Xorg (0x400000+0x212f9) [0x4212f9]
[   115.963] Segmentation fault at address 0x20
[   115.963] 
Fatal server error:
[   115.963] Caught signal 11 (Segmentation fault). Server aborting
[   115.963] 
[   115.963] 
Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
[   115.963] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   115.963] 
[   115.980] (II) Power Button: Close
[   115.980] (II) UnloadModule: "evdev"
[   116.007] (II) Power Button: Close
[   116.007] (II) UnloadModule: "evdev"
[   116.033] (II) Logitech USB Receiver: Close
[   116.033] (II) UnloadModule: "evdev"
[   116.064] (II) Logitech USB Receiver: Close
[   116.064] (II) UnloadModule: "evdev"
[   116.064] (II) AIGLX: Suspending AIGLX clients for VT switch
[   116.064] (II) fglrx(0): Backup framebuffer data.
[   116.151] (II) fglrx(0): Backup complete.

Edit: tried with metacity, crashes anyway.
Edit2: with indirect rendering it's better I think

Last edited by lman (2010-09-01 21:40:31)

Offline

#2307 2010-09-01 22:58:21

Cory
Member
Registered: 2009-07-13
Posts: 57

Re: The AMD/ATI Bar & Grill

Vi0L0 wrote:

wooohooo! I've got great news for you!
GPU acceleration in newest chromium works absolutely amazingly great!

Even Microsoft's Demos for IE9 (to show ie9 acceleration like this one) works with highest framerate!

But... whats more important here in normal desktop using is that with it and v-sync enabled in amdcccle flash videos are tear-free now! No tearing/flickering at all with compositing enabled and at full screen! (tested with flashplugin and nspluginwrapper from multilib repo, and with both catalyst 10.7 and 10.8)

I'm gonna post you my PKGBUILD for newest chromium-dev in minutes so you may build it,
Edit: PKGBUILD with other needed files is here. Note that you need to download ~124M fat sources archive file to build it.
And maybe i'll also upload a package for x86_64 (within a ~10 minutes).
Edit: ok, here's the package, it's only ~16M fat, but i'm not promising it will work - maybe linker linked some specific for my system libs.

I'm running chromium-dev with those arguments:

chromium-dev --enable-gpu-plugin --enable-accelerated-compositing --enable-accelerated-2d-canvas

You can run it with webgl support:

chromium-dev --enable-gpu-plugin --enable-accelerated-compositing --enable-accelerated-2d-canvas --enable-webgl

and watch ie. this demo ;P

Ofcourse you can also add these arguments to Exec line of /usr/share/applications/chromium-dev.desktop file, here's example with extensions enabled:

Exec=chromium-dev %U --enable-gpu-plugin --enable-accelerated-compositing --enable-accelerated-2d-canvas --enable-webgl --enable-extensions

Important Edit: Ive found that running it with --enable-accelerated-2d-canvas argument could cause to system crash while viewing some pages like http://images.google.pl so feel free to remove it (although performance on some pages like those ms tests will drop)

Btw i've builded this chromium-dev package when i was using/testing open source drivers - but it should work good on catalyst, at least it's working good for me.
Ps. oss drivers are good, better than when i was using them before (0,5year ago) but i was catching some problems with flash videos when watching them on fullscreen (laggy after some time), also this gpu acceleration doesn't work on them.

cheers! smile

This work very well, here another page to test http://www.satine.org/research/webkit/s … stack.html
and the i686 chromium-dev package http://www.mediafire.com/?l3fc6knefi0eko1

Some images

instantnea13.th.png
instantnea15.th.png
instantnea14l.th.png

Last edited by Cory (2010-09-02 00:22:12)

Offline

#2308 2010-09-02 00:23:42

gbj13
Member
Registered: 2010-05-06
Posts: 109

Re: The AMD/ATI Bar & Grill

@ iman
I have a working configuration with compiz and catalyst 10.8...using kde

Here is my xorg.conf

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "aticonfig-Screen[0]-0" 0 0
    Option        "AIGLX" "on"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/TTF"
    FontPath     "/usr/share/fonts/misc"
    FontPath     "/usr/share/fonts/100dpi:unscaled"
    FontPath     "/usr/share/fonts/75dpi:unscaled"
    FontPath     "/usr/share/fonts/Type1"
EndSection

Section "Module"
    Load  "dbe"
    Load  "dri"
    Load  "dri2"
    Load  "extmod"
    Load  "glx"
    Load  "record"
EndSection

Section "Monitor"

    # mm
    Identifier   "Monitor0"
    VendorName   "SAM"
    ModelName    "SyncMaster"
    DisplaySize  474    296
    HorizSync    30.0 - 81.0
    VertRefresh  56.0 - 75.0
    Gamma        0.8
    Option        "DPMS"
    Option        "DPI" "120 x 120"
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[0]-0"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "Dac8Bit"                # [<bool>]
        #Option     "BusType"                # [<str>]
        #Option     "CPPIOMode"              # [<bool>]
        #Option     "CPusecTimeout"          # <i>
        #Option     "AGPMode"                # <i>
        #Option     "AGPFastWrite"           # [<bool>]
        #Option     "AGPSize"                # <i>
        #Option     "GARTSize"               # <i>
        #Option     "RingSize"               # <i>
        #Option     "BufferSize"             # <i>
        #Option     "EnableDepthMoves"       # [<bool>]
        #Option     "EnablePageFlip"         # [<bool>]
        #Option     "NoBackBuffer"           # [<bool>]
        #Option     "DMAForXv"               # [<bool>]
        #Option     "FBTexPercent"           # <i>
        #Option     "DepthBits"              # <i>
        #Option     "PCIAPERSize"            # <i>
        #Option     "AccelDFS"               # [<bool>]
        #Option     "PanelSize"              # [<str>]
        #Option     "ForceMinDotClock"       # <freq>
        #Option     "ColorTiling"            # [<bool>]
        #Option     "VideoKey"               # <i>
        #Option     "RageTheatreCrystal"     # <i>
        #Option     "RageTheatreTunerPort"     # <i>
        #Option     "RageTheatreCompositePort"     # <i>
        #Option     "RageTheatreSVideoPort"     # <i>
        #Option     "TunerType"              # <i>
        #Option     "RageTheatreMicrocPath"     # <str>
        #Option     "RageTheatreMicrocType"     # <str>
        #Option     "ScalerWidth"            # <i>
        #Option     "ShowCache"              # [<bool>]
        #Option     "DynamicClocks"          # [<bool>]
        #Option     "VGAAccess"              # [<bool>]
        #Option     "ReverseDDC"             # [<bool>]
        #Option     "LVDSProbePLL"           # [<bool>]
        #Option     "AccelMethod"            # <str>
        #Option     "DRI"                    # [<bool>]
        #Option     "ConnectorTable"         # <str>
        #Option     "DefaultConnectorTable"     # [<bool>]
        #Option     "DefaultTMDSPLL"         # [<bool>]
        #Option     "TVDACLoadDetect"        # [<bool>]
        #Option     "ForceTVOut"             # [<bool>]
        #Option     "TVStandard"             # <str>
        #Option     "IgnoreLidStatus"        # [<bool>]
        #Option     "DefaultTVDACAdj"        # [<bool>]
        #Option     "Int10"                  # [<bool>]
        #Option     "EXAVSync"               # [<bool>]
        #Option     "ATOMTVOut"              # [<bool>]
        #Option     "R4xxATOM"               # [<bool>]
    Identifier  "Card0"
    Driver      "radeon"
    VendorName  "ATI Technologies Inc"
    BoardName   "RV770 [Radeon HD 4850]"
    Option        "RenderAccel" "true"
        #Option     "SubPixelOrder"          # [<str>]
    Option        "IgnoreEDID" "true"
        #Option     "DisplayPriority"        # [<str>]
    Option        "TexturedVideo" "on"    #->AVIVO accelerated video through 3D engine ideal for Compiz...
    Option        "UseFastTLS" "1"    #->Enable/disable fast thread local storage. Disable this option when virtual machines or WineX fail to work properly.     
    Option        "DRI" "true"
    Option        "XAANoOffscreenPixmaps" "on"
    Option        "VideoOverlay" "off"
    Option        "OpenGLOverlay" "off"
    Option        "Textured2D" "on"
    Option        "BackingStore" "on"
    Option        "TripleBuffer" "on"
    Option        "ColorTiling" "on"
    Option        "EnableDepthMoves" "true"
    Option        "Capabilities" "0x00000000"
    Option        "DepthBits" "24"
    Option        "RingSize" "4"
    Option        "BufferSize" "2"
    BusID       "PCI:2:0:0"
EndSection

Section "Device"
    Identifier  "aticonfig-Device[0]-0"
    Driver      "fglrx"
    Option        "UseFastTLS" "1"
    BusID       "PCI:2:0:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device     "aticonfig-Device[0]-0"
    Monitor    "aticonfig-Monitor[0]-0"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "DRI"
    Group        "video"
    Mode         0666
EndSection

Section "Extensions"
    Option        "Composite" "Enable"
    Option        "RENDER" "Enable"
    Option        "DAMAGE" "Enable"
EndSection

Dont forget to run the command

aticonfig --input=/etc/X11/xorg.conf --tls=1

after every manual update of the xorg.conf smile

Here are also commands that might help, note that you have to be in init 3 to run them...

#10 Bit color and openGL processing feature
aticonfig --set-pcs-val=DDX,OGLFMTA2R10G10B10Enable,1

#TexturedXrender
aticonfig --set-pcs-str=DDX,EnableRandR12,TRUE

#Direct2D
aticonfig --set-pcs-str=DDX,Direct2DAccel,TRUE

Offline

#2309 2010-09-02 03:05:52

mDuo13
Member
Registered: 2010-04-25
Posts: 89

Re: The AMD/ATI Bar & Grill

mDuo13 wrote:

Upgraded to Catalyst 10.8. Dunno what I was thinking - perhaps hoping for some reason that ATI would fix bugs rather than introduce new ones. I guess that was naive of me. Blackboxes bug didn't go away (fixed it by reverting to old 2D engine as previously mentioned) but now Starcraft 2 won't run under WINE. Getting messages like this:

 II.exe: xcb_io.c:506: _XReply: Assertion `!dpy->xcb->reply_data' failed.

(It seems cut-off; I've seen a couple variations, with different amounts of the to Starcraft II.exe trimmed from the start)

Anyway, Googling for the error message didn't turn up anything helpful, but I thought I'd ask around. Anyone else seeing this problem? Anyone else running SC2 successfully under Catalyst 10.8? If so, what card do you have? (Mine's a 5770.)

Further update - Apparently the Debian folks noticed this one too and think it's a problem with Catalyst 10.8.

Seems like the problem occurs when any app running under WINE attempts to fullscreen itself. (Doesn't matter whether WINE is emulating a virtual desktop or not.) =/

Last edited by mDuo13 (2010-09-02 03:06:18)

Offline

#2310 2010-09-02 06:08:23

lman
Member
From: CZ
Registered: 2007-12-18
Posts: 252

Re: The AMD/ATI Bar & Grill

@gbj13

Thx for the configs. I have the same card, but after a while it still crashes sad

Backtrace:
[   320.982] 0: /usr/bin/Xorg (xorg_backtrace+0x28) [0x49e388]
[   320.982] 1: /usr/bin/Xorg (0x400000+0x5f939) [0x45f939]
[   320.982] 2: /lib/libpthread.so.0 (0x7ffbbc9f8000+0xf1c0) [0x7ffbbca071c0]
[   320.982] 3: /usr/lib/xorg/modules/extensions/libextmod.so (0x7ffbba258000+0x
12249) [0x7ffbba26a249]
[   320.982] 4: /usr/bin/Xorg (0x400000+0x2d2dc) [0x42d2dc]
[   320.982] 5: /usr/bin/Xorg (0x400000+0x2173a) [0x42173a]
[   320.982] 6: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7ffbbb98bc4d]
[   320.982] 7: /usr/bin/Xorg (0x400000+0x212f9) [0x4212f9]
[   320.982] Segmentation fault at address 0x20
[   320.982] 
Fatal server error:
[   320.982] Caught signal 11 (Segmentation fault). Server aborting
[   320.982] 
[   320.982] 

/me wonder what's wrong sad

Edit: I was using the git kernel, with the stable kernel from core everything seems fine for now (~half a day)

Last edited by lman (2010-09-02 20:14:13)

Offline

#2311 2010-09-02 20:31:08

msx
Member
From: solar.system/earth/ar/bue/mdp
Registered: 2010-08-08
Posts: 184
Website

Re: The AMD/ATI Bar & Grill

10.8 has been a total failure here. After 'upgrading' catalyst driver I can't play anymore any movie/video file without getting a totally-froze/hang machine with cold reboot as only solution
I did try all and everyone of the suggested fixes at the ATI/Catalyst wiki but system's still crashing hard everytime I play a movie and go into fullscreen and then into windowed mode back, minimize or unminize it, load another video file and so on; even rebuilding module -as suggested by wonder- didn't help. I'm reverting to 10.7 in search of some of the stability I lost 'upgrading'.

Thanks anyways Vi0L0 for your great work and phuck AMD/ATI, this was the last time I buy anything from them.


*UPDATE*: shifting back to 10.7 everything works great :)

Last edited by msx (2010-09-02 21:52:26)


Enjoying i3wm w/ lifebar + j4-dmenu-desktop + tab_windows / fish shell / Emacs / tmux / Konsole / KDE apps
Arch + Linux-libre kernel: ParabolaGNULinux.org

Offline

#2312 2010-09-02 21:48:45

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,299
Website

Re: The AMD/ATI Bar & Grill

msx wrote:

10.8
Thanks anyways Vi0L0 for your great work and phuck AMD/ATI, this was the last time I buy anything from them.

n/p and btw ATI brand doesn't exist anymore wink.

Offline

#2313 2010-09-04 02:55:01

subzero316
Member
From: Melbourne
Registered: 2010-05-03
Posts: 28
Website

Re: The AMD/ATI Bar & Grill

I get a Flickering when I watch a video using gl,gl2 or vaapi:gl as output. This disappears in full screen or if I disable K win Effects. Also Happens in Chromium 7.0.x when it uses GPU. If that is not bad, when I switch to another desktop the content without the window frame hangs onto the desktop I switch to. How do I get rid of this.
EDIT: Ans - Switch off kwin effects. Any other means? tried the ones in wiki nothing helps

Last edited by subzero316 (2010-09-05 10:03:30)

Offline

#2314 2010-09-04 04:46:54

agapito
Member
From: Spain
Registered: 2008-11-13
Posts: 495

Re: The AMD/ATI Bar & Grill

Chromium-dev is the fastest web browsing experience i 've had on linux. Openjdk and flashplugin are working perfectly .

Last edited by agapito (2010-09-04 04:48:54)


Excuse my poor English.

Offline

#2315 2010-09-05 15:16:04

kismet010
Member
Registered: 2009-09-02
Posts: 137

Re: The AMD/ATI Bar & Grill

question: is normal in gray areas of the screen (no black in general) be tiny dots moving? (sony laptop monitor)

Offline

#2316 2010-09-05 17:39:45

Mountainjew
Member
From: Ireland
Registered: 2008-08-24
Posts: 405

Re: The AMD/ATI Bar & Grill

Hey ATi fellows...

I'll be switching to ATi in a few days, and was wondering if there was anything i can do to prepare my system in advance for the change? I'm currently using the proprietary Nvidia driver and i think i'll switch to the catalyst driver rather than the open source alternative. Obviously i can't install the driver now, since it conflicts with Nvidia, but is there much to do after installing the catalyst driver? Does it set up it's own config in xorg.conf.d such as the Nvidia driver does?

I've heard the ATi drivers are a pain in the ass, and i'd just like to prepare as best as possible before i make the switch.

Dunno if it's relevant, but i'm getting an HIS 5850, any known issues with this card?

Offline

#2317 2010-09-05 17:48:40

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,299
Website

Re: The AMD/ATI Bar & Grill

Mountainjew wrote:

Hey ATi fellows...

I'll be switching to ATi in a few days, and was wondering if there was anything i can do to prepare my system in advance for the change? I'm currently using the proprietary Nvidia driver and i think i'll switch to the catalyst driver rather than the open source alternative. Obviously i can't install the driver now, since it conflicts with Nvidia, but is there much to do after installing the catalyst driver? Does it set up it's own config in xorg.conf.d such as the Nvidia driver does?

I've heard the ATi drivers are a pain in the ass, and i'd just like to prepare as best as possible before i make the switch.

Just read catalyst wiki. I believe that using [catalyst] main repository is a good idea, but if you'll notice any lags while using desktop environment - switch to [catalyst-10.7] repo.

Offline

#2318 2010-09-05 17:52:33

msx
Member
From: solar.system/earth/ar/bue/mdp
Registered: 2010-08-08
Posts: 184
Website

Re: The AMD/ATI Bar & Grill

Mountainjew wrote:

Hey ATi fellows...

I'll be switching to ATi in a few days

Are you masochist or just a strange man?
Good luck there! hehehehehehe

Last edited by msx (2010-09-05 17:53:47)


Enjoying i3wm w/ lifebar + j4-dmenu-desktop + tab_windows / fish shell / Emacs / tmux / Konsole / KDE apps
Arch + Linux-libre kernel: ParabolaGNULinux.org

Offline

#2319 2010-09-05 18:19:46

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,299
Website

Re: The AMD/ATI Bar & Grill

msx wrote:
Mountainjew wrote:

Hey ATi fellows...

I'll be switching to ATi in a few days

Are you masochist or just a strange man?
Good luck there! hehehehehehe

big_smile so maybe we should call a vote here like: hd5850 vs gtx460? Naaah - it's useless, we already know the winner wink.

@Mountainjew:
i'm guessing that you chosen 5850 because of it's features and your target here is Windows use, but please do not negate opensource drivers - they are pretty good (with testing 2d/3d/video acceleration features) when you aren't using more complicated games/opengl apps. Also switching from [catalyst] repo to Perry3D's [radeon] repo is pretty easy.
Here is oss drivers forum thread: https://bbs.archlinux.org/viewtopic.php?id=79509&p=1, and here is wiki: http://wiki.archlinux.org/index.php/ATI

Last edited by Vi0L0 (2010-09-05 18:28:49)

Offline

#2320 2010-09-05 18:30:25

Mountainjew
Member
From: Ireland
Registered: 2008-08-24
Posts: 405

Re: The AMD/ATI Bar & Grill

Yeah i'm switching to ATi primarily for windows gaming, since i prefer ATi cards. The only reason i ever got an Nvidia was for linux, but since i'll be keeping that box on linux permanently, i won't mind much about linux 3d performance. But i don't use many 3d features anyway, i run openbox and very few games, like Penumbra, Osmos, Doom 3 etc. So i'm not bothered much about performance, and i might consider the open source drivers. I'm sure i'll test both drivers out and decide smile

Thanks for the help ViOLO, i'll read over that stuff in the meantime big_smile

msx wrote:
Mountainjew wrote:

Hey ATi fellows...

I'll be switching to ATi in a few days

Are you masochist or just a strange man?
Good luck there! hehehehehehe

Hah, let's just say i enjoy a challenge and get bored when things just work big_smile

Last edited by Mountainjew (2010-09-05 18:34:43)

Offline

#2321 2010-09-05 21:39:17

msx
Member
From: solar.system/earth/ar/bue/mdp
Registered: 2010-08-08
Posts: 184
Website

Re: The AMD/ATI Bar & Grill

Hah, let's just say i enjoy a challenge and get bored when things just work :D

Then you'll have quite a lot things to fun with, you'll see, hahaha  ;-)
BTW, remember send Vi0L0 a cold six-pack irish beer for his great job, without him ATi Catalyst on Arch would be plain impossible :P

Last edited by msx (2010-09-05 21:39:45)


Enjoying i3wm w/ lifebar + j4-dmenu-desktop + tab_windows / fish shell / Emacs / tmux / Konsole / KDE apps
Arch + Linux-libre kernel: ParabolaGNULinux.org

Offline

#2322 2010-09-08 20:13:08

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,299
Website

Re: The AMD/ATI Bar & Grill

Future of catalyst package: New automatic re-compilation method.

Request for Comments

I would like to introduce you a new way of auto re-compiling fglrx module which is basing on a system daemon.
This new method is fully provided by B. M. Kwapinski (xmL). Many many thanks to him!

All tasks served by a hook are done here by autofglrx daemon which is starting just after kernel's boot and is rebuilding fglrx module if kernel was updated.
So theres no need of using hook and no need of forcing pacman to install kernel26-headers package in first place.
xmL and me have alredy tested it. It is far better than a hook and it's working like a charm, but i would like to ask you for feedback before updating repositories and AUR.

So here are PKGBUILDs and other needed files to build new packages:
- catalyst 10.7
- catalyst 10.8

All previous hook's entries will be erased in the installation process.

Auto re-compilation is disabled by default, but all you have to do to enable it is:
- type as root

catalyst_build_module auto

  which will add autofglrx in the first position of DAEMONS array in /etc/rc.conf file;
- or to manually add autofglrx to DAEMONS array of /etc/rc.conf file
  (please remember to add it before your_dm (gdm/kdm/etc), and without monkey (@) because it must NOT be started in the background).

'catalyst_build_module' works as always.

Last edited by Vi0L0 (2010-09-08 20:31:15)

Offline

#2323 2010-09-08 20:44:36

Cdh
Member
Registered: 2009-02-03
Posts: 1,098

Re: The AMD/ATI Bar & Grill

Vi0L0 wrote:

  (please remember to add it before your_dm (gdm/kdm/etc), and without monkey (@) because it must NOT be started in the background).

What if you start X with runlevel 5?


฿ 18PRsqbZCrwPUrVnJe1BZvza7bwSDbpxZz

Offline

#2324 2010-09-08 20:47:37

lman
Member
From: CZ
Registered: 2007-12-18
Posts: 252

Re: The AMD/ATI Bar & Grill

Cdh wrote:
Vi0L0 wrote:

  (please remember to add it before your_dm (gdm/kdm/etc), and without monkey (@) because it must NOT be started in the background).

What if you start X with runlevel 5?

It's the same, X won't get started until all the "foreground" (without the monkey) deamons are started wink

Offline

#2325 2010-09-08 22:32:24

cyberpatrol
Member
From: Germany
Registered: 2006-11-22
Posts: 68

Re: The AMD/ATI Bar & Grill

I don't like the idea about the daemon method, because a daemon needs to run always in the background and takes system resources while the fglrx modules only need to be rebuilt after a kernel upgrade. And I really don't want to have a daemon permanently run in the background just for one task which has to be accomplished only once every several weeks or months.

The daemon method would really be a waste of resources.

And it always takes time to starting the daemon at boot time, which means that booting the system takes unnecessarily longer every time.

So, please, keep the hook method and forget the daemon method.

Last edited by cyberpatrol (2010-09-08 22:33:33)

Offline

Board footer

Powered by FluxBB