You are not logged in.

#1 2010-09-13 20:37:04

ehlo
Member
From: England
Registered: 2010-04-04
Posts: 65

Xorg Synaptic help!

Hi,

I have a new laptop (Sony E-series) and I'm having trouble getting the Synaptic touchpad configured correctly.

Here is Xorg.0.log output when X starts

[   480.872] (II) Primary Device is: PCI 01@00:00:0
[   480.872] (II) [KMS] Kernel modesetting enabled.
[   480.872] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[   480.872] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[   480.872] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   480.872] (==) RADEON(0): Default visual is TrueColor
[   480.872] (==) RADEON(0): RGB weight 888
[   480.872] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[   480.872] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 5000 Series" (ChipID = 0x68e0)
[   480.872] (II) RADEON(0): PCIE card detected
[   480.872] (WW) RADEON(0): Color tiling is not yet supported on R600/R700
[   480.872] (II) RADEON(0): KMS Color Tiling: disabled
[   480.872] drmOpenDevice: node name is /dev/dri/card0
[   480.872] drmOpenDevice: open result is 8, (OK)
[   480.872] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[   480.872] drmOpenDevice: node name is /dev/dri/card0
[   480.872] drmOpenDevice: open result is 8, (OK)
[   480.872] drmOpenByBusid: drmOpenMinor returns 8
[   480.872] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[   480.872] (II) RADEON(0): Output LVDS has no monitor section
[   480.876] (II) RADEON(0): Output HDMI-0 has no monitor section
[   480.890] (II) RADEON(0): Output VGA-0 has no monitor section
[   480.891] (II) RADEON(0): EDID for output LVDS
[   480.891] (II) RADEON(0): Not using default mode "640x350" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "320x175" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "640x400" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "320x200" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "720x400" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "360x200" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "320x240" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "320x240" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "320x240" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "320x240" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "400x300" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "400x300" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "400x300" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "400x300" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "400x300" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1024x768i" (interlace mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "512x384i" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "512x384" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "512x384" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "512x384" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "512x384" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "576x432" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "640x480" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1280x960" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "640x480" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
[   480.891] (II) RADEON(0): Not using default mode "640x512" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1280x1024" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "640x512" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1280x1024" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "640x512" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
[   480.891] (II) RADEON(0): Not using default mode "800x600" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1600x1200" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "800x600" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1600x1200" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "800x600" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1600x1200" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "800x600" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1600x1200" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "800x600" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
[   480.891] (II) RADEON(0): Not using default mode "896x672" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1792x1344" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "896x672" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
[   480.891] (II) RADEON(0): Not using default mode "928x696" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1856x1392" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "928x696" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
[   480.891] (II) RADEON(0): Not using default mode "960x720" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1920x1440" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "960x720" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "832x624" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "416x312" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
[   480.891] (II) RADEON(0): Not using default mode "700x525" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1400x1050" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "700x525" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "1920x1440" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "960x720" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
[   480.891] (II) RADEON(0): Not using default mode "1024x768" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "2048x1536" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "1024x768" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Not using default mode "2048x1536" (vrefresh out of range)
[   480.891] (II) RADEON(0): Not using default mode "1024x768" (doublescan mode not supported)
[   480.891] (II) RADEON(0): Printing probed modes for output LVDS
[   480.891] (II) RADEON(0): Modeline "1600x900"x59.9  109.80  1600 1638 1714 1830  900 916 949 1001 -hsync -vsync (60.0 kHz)
[   480.891] (II) RADEON(0): Modeline "1440x900"x59.9  106.50  1440 1528 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[   480.891] (II) RADEON(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[   480.891] (II) RADEON(0): Modeline "1280x854"x59.9   89.25  1280 1352 1480 1680  854 857 867 887 -hsync +vsync (53.1 kHz)
[   480.891] (II) RADEON(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
[   480.891] (II) RADEON(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz)
[   480.891] (II) RADEON(0): Modeline "1152x768"x59.8   71.75  1152 1216 1328 1504  768 771 781 798 -hsync +vsync (47.7 kHz)
[   480.891] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[   480.891] (II) RADEON(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[   480.891] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   480.891] (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[   480.891] (II) RADEON(0): Modeline "848x480"x59.7   31.50  848 872 952 1056  480 483 493 500 -hsync +vsync (29.8 kHz)
[   480.891] (II) RADEON(0): Modeline "720x480"x59.7   26.75  720 744 808 896  480 483 493 500 -hsync +vsync (29.9 kHz)
[   480.891] (II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   480.891] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[   480.895] (II) RADEON(0): EDID for output HDMI-0
[   480.910] (II) RADEON(0): EDID for output VGA-0
[   480.910] (II) RADEON(0): Output LVDS connected
[   480.910] (II) RADEON(0): Output HDMI-0 disconnected
[   480.910] (II) RADEON(0): Output VGA-0 disconnected
[   480.910] (II) RADEON(0): Using exact sizes for initial modes
[   480.910] (II) RADEON(0): Output LVDS using initial mode 1600x900
[   480.910] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   480.910] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:20000000 visible:1fa41000
[   480.910] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[   480.910] (==) RADEON(0): DPI set to (96, 96)
[   480.910] (II) Loading sub module "fb"
[   480.910] (II) LoadModule: "fb"
[   480.910] (II) Loading /usr/lib/xorg/modules/libfb.so
[   480.910] (II) Module fb: vendor="X.Org Foundation"
[   480.910]     compiled for 1.8.1.902, module version = 1.0.0
[   480.910]     ABI class: X.Org ANSI C Emulation, version 0.4
[   480.910] (II) Loading sub module "ramdac"
[   480.910] (II) LoadModule: "ramdac"
[   480.910] (II) Module "ramdac" already built-in
[   480.910] (II) RADEON(0): GPU accel disabled or not working, using shadowfb for KMS
[   480.910] (II) Loading sub module "shadow"
[   480.910] (II) LoadModule: "shadow"
[   480.910] (II) Loading /usr/lib/xorg/modules/libshadow.so
[   480.910] (II) Module shadow: vendor="X.Org Foundation"
[   480.910]     compiled for 1.8.1.902, module version = 1.1.0
[   480.910]     ABI class: X.Org ANSI C Emulation, version 0.4
[   480.910] (--) Depth 24 pixmap format is 32 bpp
[   480.910] (II) RADEON(0): Front buffer size: 6384K
[   480.910] (II) RADEON(0): VRAM usage limit set to 460818K
[   480.911] (==) RADEON(0): Backing store disabled
[   480.911] (WW) RADEON(0): Direct rendering disabled
[   480.911] (II) RADEON(0): Acceleration disabled
[   480.911] (==) RADEON(0): DPMS enabled
[   480.911] (==) RADEON(0): Silken mouse enabled
[   480.911] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   480.911] (--) RandR disabled
[   480.911] (II) Initializing built-in extension Generic Event Extension
[   480.911] (II) Initializing built-in extension SHAPE
[   480.911] (II) Initializing built-in extension MIT-SHM
[   480.911] (II) Initializing built-in extension XInputExtension
[   480.911] (II) Initializing built-in extension XTEST
[   480.911] (II) Initializing built-in extension BIG-REQUESTS
[   480.911] (II) Initializing built-in extension SYNC
[   480.911] (II) Initializing built-in extension XKEYBOARD
[   480.911] (II) Initializing built-in extension XC-MISC
[   480.911] (II) Initializing built-in extension SECURITY
[   480.911] (II) Initializing built-in extension XINERAMA
[   480.911] (II) Initializing built-in extension XFIXES
[   480.911] (II) Initializing built-in extension RENDER
[   480.911] (II) Initializing built-in extension RANDR
[   480.911] (II) Initializing built-in extension COMPOSITE
[   480.911] (II) Initializing built-in extension DAMAGE
[   480.915] (II) AIGLX: Screen 0 is not DRI2 capable
[   480.915] (II) AIGLX: Screen 0 is not DRI capable
[   480.917] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
[   480.917] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   480.917] (II) RADEON(0): Setting screen physical size to 423 x 238
[   480.995] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event1)
[   480.995] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[   480.995] (II) LoadModule: "evdev"
[   480.995] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   480.995] (II) Module evdev: vendor="X.Org Foundation"
[   480.995]     compiled for 1.8.1.902, module version = 2.4.0
[   480.995]     Module class: X.Org XInput Driver
[   480.995]     ABI class: X.Org XInput driver, version 9.0
[   480.995] (**) Sony Vaio Keys: always reports core events
[   480.995] (**) Sony Vaio Keys: Device: "/dev/input/event1"
[   481.016] (II) Sony Vaio Keys: Found keys
[   481.016] (II) Sony Vaio Keys: Configuring as keyboard
[   481.016] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
[   481.016] (**) Option "xkb_rules" "evdev"
[   481.016] (**) Option "xkb_model" "evdev"
[   481.016] (**) Option "xkb_layout" "us"
[   481.037] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[   481.037] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   481.037] (**) Video Bus: always reports core events
[   481.037] (**) Video Bus: Device: "/dev/input/event4"
[   481.056] (II) Video Bus: Found keys
[   481.056] (II) Video Bus: Configuring as keyboard
[   481.056] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[   481.056] (**) Option "xkb_rules" "evdev"
[   481.056] (**) Option "xkb_model" "evdev"
[   481.056] (**) Option "xkb_layout" "us"
[   481.057] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[   481.057] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   481.057] (**) Power Button: always reports core events
[   481.057] (**) Power Button: Device: "/dev/input/event6"
[   481.083] (II) Power Button: Found keys
[   481.083] (II) Power Button: Configuring as keyboard
[   481.083] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[   481.083] (**) Option "xkb_rules" "evdev"
[   481.083] (**) Option "xkb_model" "evdev"
[   481.083] (**) Option "xkb_layout" "us"
[   481.083] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[   481.083] (II) No input driver/identifier specified (ignoring)
[   481.084] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event9)
[   481.084] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[   481.084] (**) USB 2.0 Camera: always reports core events
[   481.084] (**) USB 2.0 Camera: Device: "/dev/input/event9"
[   481.110] (II) USB 2.0 Camera: Found keys
[   481.110] (II) USB 2.0 Camera: Configuring as keyboard
[   481.110] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD)
[   481.110] (**) Option "xkb_rules" "evdev"
[   481.110] (**) Option "xkb_model" "evdev"
[   481.110] (**) Option "xkb_layout" "us"
[   481.110] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[   481.110] (II) No input driver/identifier specified (ignoring)
[   481.112] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   481.112] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   481.112] (**) AT Translated Set 2 keyboard: always reports core events
[   481.112] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   481.133] (II) AT Translated Set 2 keyboard: Found keys
[   481.133] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[   481.133] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[   481.133] (**) Option "xkb_rules" "evdev"
[   481.133] (**) Option "xkb_model" "evdev"
[   481.133] (**) Option "xkb_layout" "us"
[   481.133] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[   481.133] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   481.133] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad"
[   481.133] (II) LoadModule: "synaptics"
[   481.134] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   481.134] (II) Module synaptics: vendor="X.Org Foundation"
[   481.134]     compiled for 1.8.0.902, module version = 1.2.2
[   481.134]     Module class: X.Org XInput Driver
[   481.134]     ABI class: X.Org XInput driver, version 9.0
[   481.134] (II) Synaptics touchpad driver version 1.2.2
[   481.134] (**) Option "Device" "/dev/input/event7"
[   481.267] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5692
[   481.267] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4714
[   481.267] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   481.267] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[   481.267] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[   481.267] (**) Option "SHMConfig" "on"
[   481.267] (**) Option "EmulateTwoFingerMinZ" "0"
[   481.267] (**) Option "VertEdgeScroll" "on"
[   481.267] (**) Option "HorizEdgeScroll" "on"
[   481.267] (**) Option "VertTwoFingerScroll" "on"
[   481.267] (**) Option "HorizTwoFingerScroll" "on"
[   481.267] (**) Option "TapButton1" "1"
[   481.267] (**) Option "TapButton2" "2"
[   481.267] (**) Option "TapButton3" "3"
[   481.267] (**) Option "CircularScrolling" "on"
[   481.267] (**) Option "CircScrollTrigger" "2"
[   481.387] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   481.387] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   481.440] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[   481.440] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   481.440] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[   481.440] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   481.440] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   481.520] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   481.520] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[   481.520] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad"
[   481.520] (II) Synaptics touchpad driver version 1.2.2
[   483.070] SynPS/2 Synaptics TouchPad no synaptics event device found
[   483.070] (**) Option "Device" "/dev/input/mouse1"
[   483.097] (**) Option "SHMConfig" "on"
[   483.097] (**) Option "EmulateTwoFingerMinZ" "0"
[   483.097] (**) Option "VertEdgeScroll" "on"
[   483.097] (**) Option "HorizEdgeScroll" "on"
[   483.097] (**) Option "VertTwoFingerScroll" "on"
[   483.097] (**) Option "HorizTwoFingerScroll" "on"
[   483.097] (**) Option "TapButton1" "1"
[   483.097] (**) Option "TapButton2" "2"
[   483.097] (**) Option "TapButton3" "3"
[   483.097] (**) Option "CircularScrolling" "on"
[   483.097] (**) Option "CircScrollTrigger" "2"
[   483.117] Query no Synaptics: 6003C8
[   483.117] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[   483.117] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[   483.160] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
[   483.160] (II) UnloadModule: "synaptics"
[   483.160] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[   483.160] (II) No input driver/identifier specified (ignoring)
[   483.161] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event2)
[   483.161] (II) No input driver/identifier specified (ignoring)
[   483.161] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
[   483.161] (II) No input driver/identifier specified (ignoring)

As you can see I added the following items in /etc/X11/xorg.conf.d/10-synaptic.conf as suggested on the wiki page

[   483.070] (**) Option "Device" "/dev/input/mouse1"
[   483.097] (**) Option "SHMConfig" "on"
[   483.097] (**) Option "EmulateTwoFingerMinZ" "0"
[   483.097] (**) Option "VertEdgeScroll" "on"
[   483.097] (**) Option "HorizEdgeScroll" "on"
[   483.097] (**) Option "VertTwoFingerScroll" "on"
[   483.097] (**) Option "HorizTwoFingerScroll" "on"
[   483.097] (**) Option "TapButton1" "1"
[   483.097] (**) Option "TapButton2" "2"
[   483.097] (**) Option "TapButton3" "3"
[   483.097] (**) Option "CircularScrolling" "on"
[   483.097] (**) Option "CircScrollTrigger" "2"

However these lines seem to indicate that for some reason my touchpad is not supported by Synaptics?

[   483.117] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[   483.117] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.

/proc/bus/input/devices shows this is definitely a Synaptics device

I: Bus=0011 Vendor=0002 Product=0007 Version=01b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio2/input0
S: Sysfs=/devices/platform/i8042/serio2/input/input7
U: Uniq=
H: Handlers=mouse1 event7 
B: EV=b
B: KEY=420 30000 0 0 0 0
B: ABS=11000003

Any help in getting two finger scrolling and two finger middle click would be great smile
I did see some references in the Synaptics wiki entry to hal but there was a note on the wiki entry saying that the info was outdated (and I thought hal was now obsolete for X?)

Offline

#2 2010-09-13 20:45:15

codycarey
Member
Registered: 2009-08-21
Posts: 154

Re: Xorg Synaptic help!

The search function is your friend, there are a number of threads already with the same and similar issues.

To get you started though, https://bbs.archlinux.org/viewtopic.php?id=104769 may be the same issue you're having.

Last edited by codycarey (2010-09-13 20:45:44)

Offline

#3 2010-09-13 20:55:14

ehlo
Member
From: England
Registered: 2010-04-04
Posts: 65

Re: Xorg Synaptic help!

Thank-you! smile

I had tried searching for Synaptics but it had bought up so much stuff that I must've overlooked the topic you'd linked to! The topic you suggested helped resolve everything so now I have two finger scrolling and middle click working again

Offline

#4 2010-09-13 20:56:42

warenoso
Member
From: Brisbane
Registered: 2010-08-06
Posts: 76

Re: Xorg Synaptic help!

please add [solved] to the title for future references,

Offline

#5 2010-09-13 21:03:42

stefanwilkens
Member
From: Enschede, the Netherlands
Registered: 2008-12-10
Posts: 624

Re: Xorg Synaptic help!

Just for future references, this is the related bugreport:
https://bugs.archlinux.org/task/20830

Last edited by stefanwilkens (2010-09-13 21:04:10)


Arch i686 on Phenom X4 | GTX760

Offline

#6 2010-12-08 05:15:51

giusemc
Member
Registered: 2010-12-08
Posts: 3

Re: Xorg Synaptic help!

i also had sony vaio E series but i couldn't fix it, please help me how to do step by step
Thanks

Offline

#7 2010-12-08 05:48:07

jasonwryan
Forum & Wiki Admin
From: .nz
Registered: 2009-05-09
Posts: 18,552
Website

Re: Xorg Synaptic help!

giusemc: the thread that codycarey linked to has the solution you are looking for. Please don't be a help vampire


Arch + dwm   •   Mercurial repos  •   Github

Registered Linux User #482438

Offline

#8 2010-12-08 05:53:06

CountDuckula
Member
Registered: 2010-02-28
Posts: 151

Re: Xorg Synaptic help!

LOL - help vampire, thats a good one smile

Offline

#9 2010-12-09 01:55:37

giusemc
Member
Registered: 2010-12-08
Posts: 3

Re: Xorg Synaptic help!

i'm not good at linux,i couldn't install xf86-input-{evdev,synaptics}, and i also didn't have file "/etc/X11/xorg.conf.d/10-synaptics.conf"
Please help me !

when i "cat /proc/bus/input/devices" :

: Bus=0006 Vendor=001f Product=001f Version=0000
N: Name="Mouseemu virtual keyboard"
P: Phys=
S: Sysfs=/devices/virtual/input/input9
U: Uniq=
H: Handlers=sysrq rfkill kbd event9 
B: EV=100003
B: KEY=1ffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff fffffffe

I: Bus=0006 Vendor=001f Product=001e Version=0000
N: Name="Mouseemu virtual mouse"
P: Phys=
S: Sysfs=/devices/virtual/input/input10
U: Uniq=
H: Handlers=mouse2 event10 
B: EV=7
B: KEY=ffff0001 0 0 0 0 0 0 0 0
B: REL=143

Last edited by giusemc (2010-12-09 02:18:46)

Offline

#10 2010-12-09 02:37:12

jasonwryan
Forum & Wiki Admin
From: .nz
Registered: 2009-05-09
Posts: 18,552
Website

Re: Xorg Synaptic help!

What do you mean you can't install xf86-input-{evdev,synaptics}? What sort of errors are you getting etc
https://wiki.archlinux.org/index.php/Fo … ow_to_Post

And, no you won't have a synaptics file until after you install the synaptics pkg, so you should focus on that.

You should probably ask yourself why you want to use Arch if you are having these sorts of difficulties. It is for competent Linux users...


Arch + dwm   •   Mercurial repos  •   Github

Registered Linux User #482438

Offline

#11 2010-12-09 04:25:13

giusemc
Member
Registered: 2010-12-08
Posts: 3

Re: Xorg Synaptic help!

I'm so sorry. Actually, i just bought a new laptop sony vaio VPCEA, and i installed unbuntu 9.10 i686  on it. Everything are working really good, however only touchpad didn'd work,so i was looking for on the internet and i saw this topic. But i don't know how to fix it actually. Can anybody help me something ?
Thanks

Offline

#12 2010-12-09 05:01:46

ANOKNUSA
Member
Registered: 2010-10-22
Posts: 2,141

Re: Xorg Synaptic help!

In that case, you're best bet would be to head to the Ubuntu community for help, since Arch is a good bit different from Ubuntu.  Can't understand why your touchpad wouldn't work automatically, but whatever...start here.  roll

Offline

#13 2010-12-09 05:07:35

jasonwryan
Forum & Wiki Admin
From: .nz
Registered: 2009-05-09
Posts: 18,552
Website

Re: Xorg Synaptic help!

giusemc wrote:

...and i installed unbuntu 9.10 i686  on it.

You might have mentioned that earlier... This is an Arch Linux forum. As Anoknusa said, ask on the Ubuntu boards.

Closing


Arch + dwm   •   Mercurial repos  •   Github

Registered Linux User #482438

Offline

Board footer

Powered by FluxBB