You are not logged in.
Pages: 1
Good evening.
Half a month ago I discovered to my dismay that the laptop no longer was producing any sound. I've troubleshooted this entire week, and I think I'm ready to ask around on the forum. I've tried pretty much everything to my knowledge only to get disappointed afterwards.
I've reinstalled alsa, I've compiled the packages myself, I've checked logfiles (no errors), and the mixer reports that the card is active, working, and playing at the highest volume possible.
The computer in question is a laptop, and I've tested the speakers in win7, and they work like a charm.
lsmod:
Module Size Used by
nls_cp437 4525 1
vfat 8176 1
fat 42960 1 vfat
aes_i586 6892 1
aes_generic 25846 1 aes_i586
ipv6 239277 27
coretemp 4665 0
fuse 54698 9
nvidia 10070693 50
snd_seq_oss 26128 0
snd_seq_midi_event 4496 1 snd_seq_oss
snd_seq 42680 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 4653 2 snd_seq_oss,snd_seq
snd_pcm_oss 33758 0
snd_mixer_oss 14910 1 snd_pcm_oss
snd_hda_codec_nvhdmi 13547 1
snd_hda_codec_realtek 198775 1
arc4 1070 2
ecb 1589 2
snd_hda_intel 19436 7
snd_hda_codec 70155 3 snd_hda_codec_nvhdmi,snd_hda_codec_realtek,snd_hda_intel
joydev 7503 0
snd_hwdep 4924 1 snd_hda_codec
uvcvideo 53488 0
mmc_block 7634 2
cpufreq_powersave 658 0
snd_pcm 58880 5 snd_pcm_oss,snd_hda_intel,snd_hda_codec
iwlagn 244259 0
cpufreq_ondemand 6971 0
videodev 39124 1 uvcvideo
snd_timer 15583 4 snd_seq,snd_pcm
video 15889 0
acpi_cpufreq 5157 1
freq_table 1999 2 cpufreq_ondemand,acpi_cpufreq
iwlcore 104224 1 iwlagn
mperf 979 1 acpi_cpufreq
iTCO_wdt 8677 0
tg3 115656 0
sdhci_pci 5774 0
sdhci 14341 1 sdhci_pci
rtc_cmos 7746 0
intel_agp 24087 0
snd 45172 22 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_nvhdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
mmc_core 47268 2 mmc_block,sdhci
psmouse 51529 0
output 1448 1 video
wmi 5962 0
i2c_i801 7426 0
libphy 14543 1 tg3
rtc_core 11831 1 rtc_cmos
agpgart 23520 2 nvidia,intel_agp
jmb38x_ms 6830 0
iTCO_vendor_support 1433 1 iTCO_wdt
led_class 1843 1 sdhci
v4l1_compat 13562 2 uvcvideo,videodev
soundcore 5025 1 snd
i2c_core 15599 3 nvidia,videodev,i2c_i801
rtc_lib 1494 1 rtc_core
memstick 5278 1 jmb38x_ms
battery 7879 0
button 3746 0
thermal 9786 0
ac 2329 0
pcspkr 1359 0
serio_raw 3566 0
sg 20932 0
processor 25126 3 acpi_cpufreq
evdev 6820 15
snd_page_alloc 5981 2 snd_hda_intel,snd_pcm
mac80211 167958 2 iwlagn,iwlcore
cfg80211 124335 3 iwlagn,iwlcore,mac80211
rfkill 12854 1 cfg80211
ext3 110740 1
jbd 39247 1 ext3
mbcache 4290 1 ext3
uhci_hcd 19251 0
ehci_hcd 32860 0
usbcore 121705 4 uvcvideo,uhci_hcd,ehci_hcd
sr_mod 13313 0
cdrom 31410 1 sr_mod
sd_mod 26768 6
ahci 17813 0
libahci 16174 6 ahci
libata 140707 2 ahci,libahci
scsi_mod 105888 4 sg,sr_mod,sd_mod,libataLspci:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9600M GT] (rev a1)
06:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller
06:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller
06:00.3 System peripheral: JMicron Technology Corp. MS Host Controller
06:00.4 System peripheral: JMicron Technology Corp. xD Host Controller
07:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5764M Gigabit Ethernet PCIe (rev 10)cat /proc/asound/card0/codec#* | grep Codec
Codec: Realtek ALC888
Codec: LSI ID 1040
Codec: Nvidia MCP77/78 HDMII'm out of ideas. I can't recall changing anything either, the day the sound died..
Memento Mori
Offline
have you tried to reconfigure with alsaconf? try with legacy drivers first.
Offline
What is your speaker setup? Which soundcard are you trying to use? Have you tried changing the default sound device?
Offline
No legacy cards found.
Alredy tried alsaconf three times, and it apparently completes perfectly, but still no change.
codycarey: "Speaker setup" is the laptop embedded speaker. All information about the hardware is pretty concisely specified in the first post.
I've not tried changing the default sound device, as the two choices is HDMI sound or the nVidia chip.
I've never touched these settings, and they worked perfectly out of the box when I installed arch a year ago, but alas, it has ceased working by itself.
Memento Mori
Offline
If you have 'aplay' installed I suggest using 'aplay -l' to list all of the available devices. Take the card and device numbers you want to use and plug them into 'aplay' with the -D option and attempt to play a sound file.
Card 0, device 0:
aplay -D hw:0,0 /usr/share/sounds/alsa/Front_Center.wav
Card 1, device 0:
aplay -D hw:1,0 /usr/share/sounds/alsa/Front_Center.wavSo on and so forth to check that your hardware is working. If it is then you can take that device and set it as your default in your .asoundrc.
Offline
If you have 'aplay' installed I suggest using 'aplay -l' to list all of the available devices. Take the card and device numbers you want to use and plug them into 'aplay' with
So on and so forth to check that your hardware is working. If it is then you can take that device and set it as your default in your .asoundrc.
No sound from either of my three channels. Didn't bother to check the HDMI-connector as I rarely use it..
[mads@blackBox ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
[mads@blackBox ~]$ aplay -D hw:0,0 /usr/share/sounds/alsa/Front_Center.wav
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
aplay: set_params:1059: Channels count non available
[mads@blackBox ~]$ aplay -D hw:0,1 /usr/share/sounds/alsa/Front_Center.wav
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
aplay: set_params:1059: Channels count non availableChannels count non available?
Memento Mori
Offline
Nevermind. Problem solved by appending the following to modprobe.conf:
option snd-hda-intel model=auto
At last my two week struggle has come to an end.
Memento Mori
Offline
Why not marking the thread as [Solved] then?
Offline
Nevermind. Problem solved by appending the following to modprobe.conf:
option snd-hda-intel model=auto
At last my two week struggle has come to an end.
Thanks. I was having the same proble. I had to change my modprobe.conf as follows:
#options snd-hda-intel model=STAC9220/9221
option snd-hda-intel model=auto
It was no longer recognizing the specific card id.
Offline
Pages: 1