You are not logged in.

#1 2010-11-28 06:49:26

sainath
Member
Registered: 2010-11-27
Posts: 4

Help!! Kernel panics after installation!!

Hi,

I am new to Arch Linux (migrating from Fedora). I am having some problems with the installation on my Sony VAIO CW (C2D, Nvidia GT230M). At first I couldn't get past the installation of X in the Beginner's guide, but after some tweaking with conf files I finally got it to work. But after reboot, kernel panic occured. This started happening intermittently from there onwards. Then I tried to install GNOME which failed miserably as in it panics and crashes everytime system starts.

Then I tried KDE and things are much better compared to GNOME. The problem is whenever I try logging into a new KDE session, kernel panics. Only KDE Failsafe mode works (with sound). I honestly dont know what to do as I have no idea why the problem is occuring also. I plan to stay with Arch, as nouveau works much better than it used to in Fedora (3d support). Can anybody help with this issue?

Linux myhost 2.6.36-ARCH #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010 x86_64 Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz GenuineIntel GNU/Linux
10-nouveau.conf
Section "Device"
    Identifier    "n"
    Driver    "nouveau"
EndSection
Xorg.0.log
[    50.605] 
X.Org X Server 1.9.2
Release Date: 2010-10-30
[    50.605] X Protocol Version 11, Revision 0
[    50.605] Build Operating System: Linux 2.6.35-ARCH x86_64 
[    50.605] Current Operating System: Linux myhost 2.6.36-ARCH #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010 x86_64
[    50.605] Kernel command line: root=/dev/sda5 ro
[    50.605] Build Date: 01 November 2010  10:29:19PM
[    50.605]  
[    50.605] Current version of pixman: 0.20.0
[    50.605]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    50.605] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    50.605] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 28 01:33:51 2010
[    50.606] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    50.617] (==) No Layout section.  Using the first Screen section.
[    50.617] (==) No screen section available. Using defaults.
[    50.617] (**) |-->Screen "Default Screen Section" (0)
[    50.617] (**) |   |-->Monitor "<default monitor>"
[    50.617] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
[    50.617] (**) |   |-->Device "n"
[    50.617] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    50.617] (==) Automatically adding devices
[    50.617] (==) Automatically enabling devices
[    50.618] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    50.618]     Entry deleted from font path.
[    50.618] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
[    50.618] (==) ModulePath set to "/usr/lib/xorg/modules"
[    50.618] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    50.618] (II) Loader magic: 0x7d3360
[    50.618] (II) Module ABI versions:
[    50.618]     X.Org ANSI C Emulation: 0.4
[    50.618]     X.Org Video Driver: 8.0
[    50.618]     X.Org XInput driver : 11.0
[    50.618]     X.Org Server Extension : 4.0
[    50.619] (--) PCI:*(0:1:0:0) 10de:0a2a:104d:905e rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[    50.619] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    50.619] (II) LoadModule: "extmod"
[    50.620] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    50.629] (II) Module extmod: vendor="X.Org Foundation"
[    50.629]     compiled for 1.9.2, module version = 1.0.0
[    50.629]     Module class: X.Org Server Extension
[    50.629]     ABI class: X.Org Server Extension, version 4.0
[    50.629] (II) Loading extension MIT-SCREEN-SAVER
[    50.629] (II) Loading extension XFree86-VidModeExtension
[    50.629] (II) Loading extension XFree86-DGA
[    50.629] (II) Loading extension DPMS
[    50.629] (II) Loading extension XVideo
[    50.629] (II) Loading extension XVideo-MotionCompensation
[    50.629] (II) Loading extension X-Resource
[    50.629] (II) LoadModule: "dbe"
[    50.630] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    50.637] (II) Module dbe: vendor="X.Org Foundation"
[    50.637]     compiled for 1.9.2, module version = 1.0.0
[    50.637]     Module class: X.Org Server Extension
[    50.637]     ABI class: X.Org Server Extension, version 4.0
[    50.637] (II) Loading extension DOUBLE-BUFFER
[    50.637] (II) LoadModule: "glx"
[    50.637] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    50.650] (II) Module glx: vendor="X.Org Foundation"
[    50.650]     compiled for 1.9.2, module version = 1.0.0
[    50.650]     ABI class: X.Org Server Extension, version 4.0
[    50.650] (==) AIGLX enabled
[    50.650] (II) Loading extension GLX
[    50.651] (II) LoadModule: "record"
[    50.651] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    50.652] (II) Module record: vendor="X.Org Foundation"
[    50.652]     compiled for 1.9.2, module version = 1.13.0
[    50.652]     Module class: X.Org Server Extension
[    50.652]     ABI class: X.Org Server Extension, version 4.0
[    50.652] (II) Loading extension RECORD
[    50.652] (II) LoadModule: "dri"
[    50.652] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    50.661] (II) Module dri: vendor="X.Org Foundation"
[    50.661]     compiled for 1.9.2, module version = 1.0.0
[    50.661]     ABI class: X.Org Server Extension, version 4.0
[    50.661] (II) Loading extension XFree86-DRI
[    50.661] (II) LoadModule: "dri2"
[    50.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    50.662] (II) Module dri2: vendor="X.Org Foundation"
[    50.662]     compiled for 1.9.2, module version = 1.2.0
[    50.662]     ABI class: X.Org Server Extension, version 4.0
[    50.662] (II) Loading extension DRI2
[    50.662] (II) LoadModule: "nouveau"
[    50.662] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    50.675] (II) Module nouveau: vendor="X.Org Foundation"
[    50.675]     compiled for 1.9.0, module version = 0.0.16
[    50.675]     Module class: X.Org Video Driver
[    50.675]     ABI class: X.Org Video Driver, version 8.0
[    50.675] (II) NOUVEAU driver 
[    50.675] (II) NOUVEAU driver for NVIDIA chipset families :
[    50.675]     RIVA TNT    (NV04)
[    50.675]     RIVA TNT2   (NV05)
[    50.675]     GeForce 256 (NV10)
[    50.675]     GeForce 2   (NV11, NV15)
[    50.675]     GeForce 4MX (NV17, NV18)
[    50.675]     GeForce 3   (NV20)
[    50.675]     GeForce 4Ti (NV25, NV28)
[    50.675]     GeForce FX  (NV3x)
[    50.675]     GeForce 6   (NV4x)
[    50.675]     GeForce 7   (G7x)
[    50.675]     GeForce 8   (G8x)
[    50.675] (++) using VT number 7

[    50.676] drmOpenDevice: node name is /dev/dri/card0
[    50.676] drmOpenDevice: open result is 7, (OK)
[    50.676] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[    50.676] drmOpenDevice: node name is /dev/dri/card0
[    50.676] drmOpenDevice: open result is 7, (OK)
[    50.676] drmOpenByBusid: drmOpenMinor returns 7
[    50.676] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[    50.676] (II) [drm] nouveau interface version: 0.0.16
[    50.676] (II) Loading sub module "dri"
[    50.676] (II) LoadModule: "dri"
[    50.677] (II) Reloading /usr/lib/xorg/modules/extensions/libdri.so
[    50.677] (II) NOUVEAU(0): Loaded DRI module
[    50.677] drmOpenDevice: node name is /dev/dri/card0
[    50.677] drmOpenDevice: open result is 8, (OK)
[    50.677] drmOpenDevice: node name is /dev/dri/card0
[    50.677] drmOpenDevice: open result is 8, (OK)
[    50.677] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[    50.677] drmOpenDevice: node name is /dev/dri/card0
[    50.677] drmOpenDevice: open result is 8, (OK)
[    50.677] drmOpenByBusid: drmOpenMinor returns 8
[    50.677] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[    50.677] (II) [drm] DRM interface version 1.4
[    50.677] (II) [drm] DRM open master succeeded.
[    50.677] (--) NOUVEAU(0): Chipset: "NVIDIA NVa5"
[    50.677] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    50.677] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    50.677] (==) NOUVEAU(0): RGB weight 888
[    50.677] (==) NOUVEAU(0): Default visual is TrueColor
[    50.677] (==) NOUVEAU(0): Using HW cursor
[    50.696] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[    50.794] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    50.803] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[    50.804] (II) NOUVEAU(0): EDID for output LVDS-1
[    50.804] (II) NOUVEAU(0): Manufacturer: SNY  Model: 5fa  Serial#: 0
[    50.804] (II) NOUVEAU(0): Year: 2002  Week: 45
[    50.804] (II) NOUVEAU(0): EDID Version: 1.4
[    50.804] (II) NOUVEAU(0): Digital Display Input
[    50.804] (II) NOUVEAU(0): 6 bits per channel
[    50.804] (II) NOUVEAU(0): Digital interface is undefined
[    50.804] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 31  vert.: 17
[    50.804] (II) NOUVEAU(0): Gamma: 1.00
[    50.804] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[    50.804] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    50.804] (II) NOUVEAU(0): First detailed timing is preferred mode
[    50.804] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
[    50.804] (II) NOUVEAU(0): redX: 0.600 redY: 0.342   greenX: 0.295 greenY: 0.570
[    50.804] (II) NOUVEAU(0): blueX: 0.147 blueY: 0.111   whiteX: 0.312 whiteY: 0.328
[    50.804] (II) NOUVEAU(0): Manufacturer's mask: 0
[    50.804] (II) NOUVEAU(0): Supported detailed timing:
[    50.804] (II) NOUVEAU(0): clock: 72.0 MHz   Image Size:  309 x 174 mm
[    50.804] (II) NOUVEAU(0): h_active: 1366  h_sync: 1424  h_sync_end 1482 h_blank_end 1540 h_border: 0
[    50.804] (II) NOUVEAU(0): v_active: 768  v_sync: 772  v_sync_end 776 v_blanking: 780 v_border: 0
[    50.804] (II) NOUVEAU(0): Monitor name: Nvidia Defaul
[    50.804] (II) NOUVEAU(0): Monitor name: t Flat Panel
[    50.804] (II) NOUVEAU(0): Ranges: V min: 0 V max: 61 Hz, H min: 29 H max: 47 kHz, PixClock max 85 MHz
[    50.804] (II) NOUVEAU(0): EDID (in hex):
[    50.804] (II) NOUVEAU(0):     00ffffffffffff004dd9fa0500000000
[    50.804] (II) NOUVEAU(0):     2d0c0104901f1100eaa8e099574b9225
[    50.804] (II) NOUVEAU(0):     1c505400000001010101010101010101
[    50.804] (II) NOUVEAU(0):     010101010101201c56ae50000c303a3a
[    50.804] (II) NOUVEAU(0):     440035ae10000018000000fc004e7669
[    50.804] (II) NOUVEAU(0):     6469612044656661756c000000fc0074
[    50.804] (II) NOUVEAU(0):     20466c61742050616e656c00000000fd
[    50.804] (II) NOUVEAU(0):     00003d1d2f0800002020202020000003
[    50.804] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
[    50.804] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    50.804] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    50.804] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    50.804] (II) NOUVEAU(0): Modeline "1366x768"x0.0   72.00  1366 1424 1482 1540  768 772 776 780 -hsync -vsync (46.8 kHz)
[    50.804] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[    50.804] (II) NOUVEAU(0): Modeline "1366x768"x59.9   72.00  1366 1424 1482 1540  768 772 776 780 -hsync -vsync (46.8 kHz)
[    50.804] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    50.804] (II) NOUVEAU(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[    50.804] (II) NOUVEAU(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[    50.804] (II) NOUVEAU(0): Modeline "720x400"x59.6   22.25  720 744 808 896  400 403 413 417 -hsync +vsync (24.8 kHz)
[    50.804] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz)
[    50.804] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.50  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz)
[    50.903] (II) NOUVEAU(0): EDID for output VGA-1
[    50.912] (II) NOUVEAU(0): EDID for output HDMI-1
[    50.912] (II) NOUVEAU(0): Output LVDS-1 connected
[    50.912] (II) NOUVEAU(0): Output VGA-1 disconnected
[    50.912] (II) NOUVEAU(0): Output HDMI-1 disconnected
[    50.912] (II) NOUVEAU(0): Using exact sizes for initial modes
[    50.912] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1366x768
[    50.912] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    50.912] (--) NOUVEAU(0): Virtual size is 1366x768 (pitch 1376)
[    50.912] (**) NOUVEAU(0):  Driver mode "1366x768": 72.0 MHz (scaled from 0.0 MHz), 46.8 kHz, 59.9 Hz
[    50.912] (II) NOUVEAU(0): Modeline "1366x768"x59.9   72.00  1366 1424 1482 1540  768 772 776 780 -hsync -vsync (46.8 kHz)
[    50.912] (**) NOUVEAU(0):  Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[    50.912] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    50.912] (**) NOUVEAU(0):  Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[    50.912] (II) NOUVEAU(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[    50.912] (**) NOUVEAU(0):  Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[    50.912] (II) NOUVEAU(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[    50.912] (**) NOUVEAU(0):  Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[    50.912] (II) NOUVEAU(0): Modeline "720x400"x59.6   22.25  720 744 808 896  400 403 413 417 -hsync +vsync (24.8 kHz)
[    50.912] (**) NOUVEAU(0):  Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[    50.912] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz)
[    50.912] (**) NOUVEAU(0):  Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[    50.912] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.50  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz)
[    50.912] (**) NOUVEAU(0): Display dimensions: (310, 170) mm
[    50.912] (**) NOUVEAU(0): DPI set to (111, 114)
[    50.912] (II) Loading sub module "wfb"
[    50.912] (II) LoadModule: "wfb"
[    50.912] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    50.972] (II) Module wfb: vendor="X.Org Foundation"
[    50.972]     compiled for 1.9.2, module version = 1.0.0
[    50.972]     ABI class: X.Org ANSI C Emulation, version 0.4
[    50.972] (II) Loading sub module "fb"
[    50.972] (II) LoadModule: "fb"
[    50.972] (II) Loading /usr/lib/xorg/modules/libfb.so
[    50.992] (II) Module fb: vendor="X.Org Foundation"
[    50.992]     compiled for 1.9.2, module version = 1.0.0
[    50.992]     ABI class: X.Org ANSI C Emulation, version 0.4
[    50.992] (II) Loading sub module "exa"
[    50.992] (II) LoadModule: "exa"
[    50.992] (II) Loading /usr/lib/xorg/modules/libexa.so
[    50.993] (II) Module exa: vendor="X.Org Foundation"
[    50.993]     compiled for 1.9.2, module version = 2.5.0
[    50.993]     ABI class: X.Org Video Driver, version 8.0
[    50.993] (II) Loading sub module "shadowfb"
[    50.993] (II) LoadModule: "shadowfb"
[    50.994] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    50.994] (II) Module shadowfb: vendor="X.Org Foundation"
[    50.994]     compiled for 1.9.2, module version = 1.0.0
[    50.994]     ABI class: X.Org ANSI C Emulation, version 0.4
[    50.994] (--) Depth 24 pixmap format is 32 bpp
[    50.999] (II) NOUVEAU(0): Opened GPU channel 2
[    50.999] (II) NOUVEAU(0): [DRI2] Setup complete
[    50.999] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    50.999] (II) NOUVEAU(0): GART: 512MiB available
[    51.001] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[    51.027] (II) EXA(0): Driver allocated offscreen pixmaps
[    51.027] (II) EXA(0): Driver registered support for the following operations:
[    51.027] (II)         Solid
[    51.027] (II)         Copy
[    51.027] (II)         Composite (RENDER acceleration)
[    51.027] (II)         UploadToScreen
[    51.027] (II)         DownloadFromScreen
[    51.027] (==) NOUVEAU(0): Backing store disabled
[    51.027] (==) NOUVEAU(0): Silken mouse enabled
[    51.029] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    51.029] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    51.029] (==) NOUVEAU(0): DPMS enabled
[    51.029] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    51.029] (--) RandR disabled
[    51.029] (II) Initializing built-in extension Generic Event Extension
[    51.029] (II) Initializing built-in extension SHAPE
[    51.029] (II) Initializing built-in extension MIT-SHM
[    51.029] (II) Initializing built-in extension XInputExtension
[    51.029] (II) Initializing built-in extension XTEST
[    51.029] (II) Initializing built-in extension BIG-REQUESTS
[    51.029] (II) Initializing built-in extension SYNC
[    51.029] (II) Initializing built-in extension XKEYBOARD
[    51.029] (II) Initializing built-in extension XC-MISC
[    51.029] (II) Initializing built-in extension SECURITY
[    51.029] (II) Initializing built-in extension XINERAMA
[    51.029] (II) Initializing built-in extension XFIXES
[    51.029] (II) Initializing built-in extension RENDER
[    51.029] (II) Initializing built-in extension RANDR
[    51.029] (II) Initializing built-in extension COMPOSITE
[    51.029] (II) Initializing built-in extension DAMAGE
[    51.225] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    51.225] (II) AIGLX: enabled GLX_INTEL_swap_event
[    51.225] (II) AIGLX: enabled GLX_SGI_make_current_read
[    51.225] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    51.225] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/nouveau_dri.so
[    51.225] (II) GLX: Initialized DRI2 GL provider for screen 0
[    51.227] (II) NOUVEAU(0): NVEnterVT is called.
[    51.245] (II) NOUVEAU(0): Setting screen physical size to 361 x 203
[    51.245] resize called 1366 768
[    51.660] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event5)
[    51.660] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[    51.660] (II) LoadModule: "evdev"
[    51.660] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    51.676] (II) Module evdev: vendor="X.Org Foundation"
[    51.676]     compiled for 1.9.0, module version = 2.5.0
[    51.676]     Module class: X.Org XInput Driver
[    51.676]     ABI class: X.Org XInput driver, version 11.0
[    51.676] (**) Sony Vaio Keys: always reports core events
[    51.676] (**) Sony Vaio Keys: Device: "/dev/input/event5"
[    51.700] (--) Sony Vaio Keys: Found keys
[    51.700] (II) Sony Vaio Keys: Configuring as keyboard
[    51.700] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
[    51.700] (**) Option "xkb_rules" "evdev"
[    51.700] (**) Option "xkb_model" "evdev"
[    51.700] (**) Option "xkb_layout" "us"
[    51.723] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    51.723] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    51.723] (**) Video Bus: always reports core events
[    51.723] (**) Video Bus: Device: "/dev/input/event4"
[    51.726] (--) Video Bus: Found keys
[    51.726] (II) Video Bus: Configuring as keyboard
[    51.726] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    51.726] (**) Option "xkb_rules" "evdev"
[    51.726] (**) Option "xkb_model" "evdev"
[    51.726] (**) Option "xkb_layout" "us"
[    51.743] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    51.743] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    51.743] (**) Power Button: always reports core events
[    51.743] (**) Power Button: Device: "/dev/input/event2"
[    51.756] (--) Power Button: Found keys
[    51.756] (II) Power Button: Configuring as keyboard
[    51.756] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    51.756] (**) Option "xkb_rules" "evdev"
[    51.756] (**) Option "xkb_model" "evdev"
[    51.756] (**) Option "xkb_layout" "us"
[    51.757] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    51.757] (II) No input driver/identifier specified (ignoring)
[    51.760] (II) config/udev: Adding input device UVC Camera (05ca:18b5) (/dev/input/event7)
[    51.760] (**) UVC Camera (05ca:18b5): Applying InputClass "evdev keyboard catchall"
[    51.760] (**) UVC Camera (05ca:18b5): always reports core events
[    51.760] (**) UVC Camera (05ca:18b5): Device: "/dev/input/event7"
[    51.783] (--) UVC Camera (05ca:18b5): Found keys
[    51.783] (II) UVC Camera (05ca:18b5): Configuring as keyboard
[    51.783] (II) XINPUT: Adding extended input device "UVC Camera (05ca:18b5)" (type: KEYBOARD)
[    51.783] (**) Option "xkb_rules" "evdev"
[    51.783] (**) Option "xkb_model" "evdev"
[    51.783] (**) Option "xkb_layout" "us"
[    51.784] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[    51.784] (II) No input driver/identifier specified (ignoring)
[    51.786] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10)
[    51.786] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    51.786] (**) Logitech USB Receiver: always reports core events
[    51.786] (**) Logitech USB Receiver: Device: "/dev/input/event10"
[    51.800] (--) Logitech USB Receiver: Found 20 mouse buttons
[    51.800] (--) Logitech USB Receiver: Found scroll wheel(s)
[    51.800] (--) Logitech USB Receiver: Found relative axes
[    51.800] (--) Logitech USB Receiver: Found x and y relative axes
[    51.800] (II) Logitech USB Receiver: Configuring as mouse
[    51.800] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    51.800] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    51.800] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
[    51.800] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    51.800] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    51.800] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    51.800] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    51.800] (II) Logitech USB Receiver: initialized for relative axes.
[    51.800] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse2)
[    51.800] (II) No input driver/identifier specified (ignoring)
[    51.801] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event11)
[    51.801] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    51.801] (**) Logitech USB Receiver: always reports core events
[    51.801] (**) Logitech USB Receiver: Device: "/dev/input/event11"
[    51.816] (--) Logitech USB Receiver: Found 1 mouse buttons
[    51.816] (--) Logitech USB Receiver: Found scroll wheel(s)
[    51.816] (--) Logitech USB Receiver: Found relative axes
[    51.816] (--) Logitech USB Receiver: Found absolute axes
[    51.816] (--) Logitech USB Receiver: Found keys
[    51.816] (II) Logitech USB Receiver: Configuring as mouse
[    51.816] (II) Logitech USB Receiver: Configuring as keyboard
[    51.816] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    51.816] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    51.816] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[    51.816] (**) Option "xkb_rules" "evdev"
[    51.816] (**) Option "xkb_model" "evdev"
[    51.816] (**) Option "xkb_layout" "us"
[    51.816] (EE) Logitech USB Receiver: failed to initialize for relative axes.
[    51.817] (II) Logitech USB Receiver: initialized for absolute axes.
[    51.821] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    51.821] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    51.821] (**) AT Translated Set 2 keyboard: always reports core events
[    51.821] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    51.843] (--) AT Translated Set 2 keyboard: Found keys
[    51.843] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    51.843] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    51.843] (**) Option "xkb_rules" "evdev"
[    51.843] (**) Option "xkb_model" "evdev"
[    51.843] (**) Option "xkb_layout" "us"
[    51.843] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[    51.843] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    51.843] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    51.844] (**) SynPS/2 Synaptics TouchPad: Device: "/dev/input/event8"
[    51.856] (--) SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[    51.856] (--) SynPS/2 Synaptics TouchPad: Found absolute axes
[    51.856] (--) SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[    51.856] (--) SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[    51.856] (II) SynPS/2 Synaptics TouchPad: Configuring as touchpad
[    51.856] (**) SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[    51.856] (**) SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    51.856] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[    51.856] (II) SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[    51.857] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    51.857] (II) No input driver/identifier specified (ignoring)
[    51.857] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[    51.857] (II) No input driver/identifier specified (ignoring)
[    51.858] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event6)
[    51.858] (II) No input driver/identifier specified (ignoring)
[    51.858] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
[    51.858] (II) No input driver/identifier specified (ignoring)
[    80.420] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
[    80.420] (II) NOUVEAU(0): Using hsync ranges from config file
[    80.420] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    80.420] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    80.420] (II) NOUVEAU(0): Modeline "1366x768"x0.0   72.00  1366 1424 1482 1540  768 772 776 780 -hsync -vsync (46.8 kHz)
dmesg.log
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010
Command line: root=/dev/sda5 ro
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
 BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bdea7000 (usable)
 BIOS-e820: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
 BIOS-e820: 00000000bdecf000 - 00000000bdee0000 (reserved)
 BIOS-e820: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
 BIOS-e820: 00000000bdee1000 - 00000000bdf08000 (reserved)
 BIOS-e820: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
 BIOS-e820: 00000000bdf09000 - 00000000bdf0a000 (reserved)
 BIOS-e820: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
 BIOS-e820: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
 BIOS-e820: 00000000bdf1a000 - 00000000bdf39000 (reserved)
 BIOS-e820: 00000000bdf39000 - 00000000be000000 (usable)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E7FFF write-through
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 base 0BE000000 mask FFE000000 uncachable
  3 base 100000000 mask FC0000000 write-back
  4 disabled
  5 disabled
  6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbe000 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 000000000009bc00 (usable)
 modified: 000000000009bc00 - 00000000000a0000 (reserved)
 modified: 00000000000e0000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 00000000bdea7000 (usable)
 modified: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
 modified: 00000000bdecf000 - 00000000bdee0000 (reserved)
 modified: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
 modified: 00000000bdee1000 - 00000000bdf08000 (reserved)
 modified: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
 modified: 00000000bdf09000 - 00000000bdf0a000 (reserved)
 modified: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
 modified: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
 modified: 00000000bdf1a000 - 00000000bdf39000 (reserved)
 modified: 00000000bdf39000 - 00000000be000000 (usable)
 modified: 00000000e0000000 - 00000000f0000000 (reserved)
 modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
 modified: 00000000ffe00000 - 0000000100000000 (reserved)
 modified: 0000000100000000 - 0000000140000000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fd690] fd690
init_memory_mapping: 0000000000000000-00000000be000000
 0000000000 - 00be000000 page 2M
kernel direct mapping tables up to be000000 @ 16000-1a000
init_memory_mapping: 0000000100000000-0000000140000000
 0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ 18000-1e000
RAMDISK: 37e39000 - 37ff0000
ACPI: RSDP 00000000000f03b0 00024 (v02   Sony)
ACPI: XSDT 00000000bdf12f10 0005C (v01   Sony     VAIO 20090922 MSFT 00010013)
ACPI: FACP 00000000bdf08a90 000F4 (v04   Sony     VAIO 20090922 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40, using 32 (20100702/tbfadt-486)
ACPI: DSDT 00000000bdf0a010 06831 (v01   Sony     VAIO 20090922 INTL 20051117)
ACPI: FACS 00000000bdf19e40 00040
ACPI: APIC 00000000bdf11f10 0006C (v02   Sony     VAIO 20090922 MSFT 00010013)
ACPI: MCFG 00000000bdf18c90 0003C (v01   Sony     VAIO 20090922 MSFT 00000097)
ACPI: HPET 00000000bdf18c10 00038 (v01   Sony     VAIO 20090922 MSFT 00010013)
ACPI: SLIC 00000000bdf14c10 00176 (v01   Sony     VAIO 20090922 Sony 01000000)
ACPI: SSDT 00000000bdee0590 00505 (v01   Sony     VAIO 20090922 INTL 20051117)
ACPI: SSDT 00000000bdecbc10 002E4 (v01   Sony     VAIO 20090922 INTL 20051117)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
    0: 0x00000010 -> 0x0000009b
    0: 0x00000100 -> 0x000bdea7
    0: 0x000bdf39 -> 0x000be000
    0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1040121
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3923 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 759718 pages, LIFO batch:31
  Normal zone: 3584 pages used for memmap
  Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [19300 - 19aff]
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bdea7000 - 00000000bdecf000
PM: Registered nosave memory: 00000000bdecf000 - 00000000bdee0000
PM: Registered nosave memory: 00000000bdee0000 - 00000000bdee1000
PM: Registered nosave memory: 00000000bdee1000 - 00000000bdf08000
PM: Registered nosave memory: 00000000bdf08000 - 00000000bdf09000
PM: Registered nosave memory: 00000000bdf09000 - 00000000bdf0a000
PM: Registered nosave memory: 00000000bdf0a000 - 00000000bdf14000
PM: Registered nosave memory: 00000000bdf14000 - 00000000bdf1a000
PM: Registered nosave memory: 00000000bdf1a000 - 00000000bdf39000
PM: Registered nosave memory: 00000000be000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at be000000 (gap: be000000:22000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s86016 r8192 d20480 u524288
early_res array is doubled to 128 at [19b00 - 1aaff]
pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1022201
Kernel command line: root=/dev/sda5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (69 early reservations)
  #1 [0001000000 - 00017f99a8]   TEXT DATA BSS
  #2 [0037e39000 - 0037ff0000]         RAMDISK
  #3 [00017fa000 - 00017fa1f8]             BRK
  #4 [00000fd6a0 - 0000100000]   BIOS reserved
  #5 [00000fd690 - 00000fd6a0]    MP-table mpf
  #6 [000009bc00 - 00000fd410]   BIOS reserved
  #7 [00000fd624 - 00000fd690]   BIOS reserved
  #8 [00000fd410 - 00000fd624]    MP-table mpc
  #9 [0000010000 - 0000012000]      TRAMPOLINE
  #10 [0000012000 - 0000016000]     ACPI WAKEUP
  #11 [0000016000 - 0000018000]         PGTABLE
  #12 [0000018000 - 0000019000]         PGTABLE
  #13 [00017fa200 - 00017fb200]         BOOTMEM
  #14 [0000019000 - 0000019300]         BOOTMEM
  #15 [0001ffc000 - 0001ffd000]         BOOTMEM
  #16 [0001ffd000 - 0001ffe000]         BOOTMEM
  #17 [0002000000 - 0005800000]        MEMMAP 0
  #18 [00017fb200 - 0001813200]         BOOTMEM
  #19 [0001813200 - 000182b200]         BOOTMEM
  #20 [000182b200 - 0001843200]         BOOTMEM
  #21 [0001844000 - 0001845000]         BOOTMEM
  #22 [00017f99c0 - 00017f9a01]         BOOTMEM
  #23 [00017f9a40 - 00017f9a83]         BOOTMEM
  #24 [00017f9ac0 - 00017f9ee8]         BOOTMEM
  #25 [00017f9f00 - 00017f9f68]         BOOTMEM
  #26 [00017f9f80 - 00017f9fe8]         BOOTMEM
  #27 [0001843200 - 0001843268]         BOOTMEM
  #28 [0001843280 - 00018432e8]         BOOTMEM
  #29 [0001843300 - 0001843368]         BOOTMEM
  #30 [0001843380 - 00018433e8]         BOOTMEM
  #31 [0001843400 - 0001843468]         BOOTMEM
  #32 [0001843480 - 00018434e8]         BOOTMEM
  #33 [0001843500 - 0001843568]         BOOTMEM
  #34 [0001843580 - 00018435e8]         BOOTMEM
  #35 [0001843600 - 0001843668]         BOOTMEM
  #36 [0001843680 - 00018436e8]         BOOTMEM
  #37 [0001843700 - 0001843768]         BOOTMEM
  #38 [0001843780 - 00018437e8]         BOOTMEM
  #39 [0001843800 - 0001843868]         BOOTMEM
  #40 [0001843880 - 00018438e8]         BOOTMEM
  #41 [0001843900 - 0001843968]         BOOTMEM
  #42 [0001843980 - 00018439e8]         BOOTMEM
  #43 [0001843a00 - 0001843a20]         BOOTMEM
  #44 [0001843a40 - 0001843a60]         BOOTMEM
  #45 [0001843a80 - 0001843aa0]         BOOTMEM
  #46 [0001843ac0 - 0001843ad2]         BOOTMEM
  #47 [0001843b00 - 0001843b12]         BOOTMEM
  #48 [0001a00000 - 0001a1c000]         BOOTMEM
  #49 [0001a80000 - 0001a9c000]         BOOTMEM
  #50 [0001b00000 - 0001b1c000]         BOOTMEM
  #51 [0001b80000 - 0001b9c000]         BOOTMEM
  #52 [0001843b40 - 0001843b48]         BOOTMEM
  #53 [0001843b80 - 0001843b88]         BOOTMEM
  #54 [0001843bc0 - 0001843bd0]         BOOTMEM
  #55 [0001843c00 - 0001843c20]         BOOTMEM
  #56 [0001843c40 - 0001843d70]         BOOTMEM
  #57 [0001843d80 - 0001843dd0]         BOOTMEM
  #58 [0001843e00 - 0001843e50]         BOOTMEM
  #59 [0001845000 - 000184d000]         BOOTMEM
  #60 [0001b9c000 - 0001f9c000]         BOOTMEM
  #61 [0005800000 - 0005a00000]         BOOTMEM
  #62 [0001843e80 - 0001843e88]         BOOTMEM
  #63 [0001843ec0 - 0001843ec8]         BOOTMEM
  #64 [000184d000 - 000184d240]         BOOTMEM
  #65 [0005a00000 - 0009a00000]         BOOTMEM
  #66 [000184d240 - 000186d240]         BOOTMEM
  #67 [000186d240 - 00018ad240]         BOOTMEM
  #68 [000001ab00 - 0000022b00]         BOOTMEM
Memory: 4020284k/5242880k available (3682k kernel code, 1082396k absent, 140200k reserved, 2083k data, 504k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2526.841 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5055.25 BogoMIPS (lpj=8422803)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
ACPI: Core revision 20100702
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz stepping 0a
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (10111.72 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bdee4c10 00265 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00265 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee2810 007A2 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 007A2 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bdee3d90 000FD (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000FD (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee1f90 00047 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00047 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f 
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io  0xe0e0-0xe0ff]
pci 0000:00:1a.1: reg 20: [io  0xe0c0-0xe0df]
pci 0000:00:1a.2: reg 20: [io  0xe0a0-0xe0bf]
pci 0000:00:1a.7: reg 10: [mem 0xd8d04c00-0xd8d04fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xd8d00000-0xd8d03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0xe080-0xe09f]
pci 0000:00:1d.1: reg 20: [io  0xe060-0xe07f]
pci 0000:00:1d.2: reg 20: [io  0xe040-0xe05f]
pci 0000:00:1d.7: reg 10: [mem 0xd8d04800-0xd8d04bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io  0xe130-0xe137]
pci 0000:00:1f.2: reg 14: [io  0xe120-0xe123]
pci 0000:00:1f.2: reg 18: [io  0xe110-0xe117]
pci 0000:00:1f.2: reg 1c: [io  0xe100-0xe103]
pci 0000:00:1f.2: reg 20: [io  0xe020-0xe03f]
pci 0000:00:1f.2: reg 24: [mem 0xd8d04000-0xd8d047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xd8d05000-0xd8d050ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0xe000-0xe01f]
pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io  0xd000-0xd07f]
pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
pci 0000:01:00.1: reg 10: [mem 0xd3080000-0xd3083fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xd7920000-0xd7923fff 64bit]
pci 0000:02:00.0: reg 18: [io  0xc000-0xc0ff]
pci 0000:02:00.0: reg 30: [mem 0xd7900000-0xd791ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.0:   bridge window [mem 0xd7900000-0xd8cfffff]
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xd6500000-0xd6501fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.1:   bridge window [mem 0xd6500000-0xd78fffff]
pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xd5100a00-0xd5100aff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10: [mem 0xd5100900-0xd51009ff]
pci 0000:04:00.1: supports D1 D2
pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.1: PME# disabled
pci 0000:04:00.3: reg 10: [mem 0xd5100000-0xd51007ff]
pci 0000:04:00.3: supports D1 D2
pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.3: PME# disabled
pci 0000:04:00.4: reg 10: [mem 0xd5100800-0xd51008ff]
pci 0000:04:00.4: supports D1 D2
pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.4: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.2:   bridge window [mem 0xd5100000-0xd64fffff]
pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3:   bridge window [io  0x9000-0x9fff]
pci 0000:00:1c.3:   bridge window [mem 0xd3100000-0xd50fffff]
pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 19 1f 
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009bc00 - 000000000009ffff 
reserve RAM buffer: 00000000bdea7000 - 00000000bfffffff 
reserve RAM buffer: 00000000be000000 - 00000000bfffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:05: [io  0x0680-0x069f] has been reserved
system 00:05: [io  0x1000-0x100f] has been reserved
system 00:05: [io  0x0800-0x0803] has been reserved
system 00:05: [io  0x0400-0x047f] has been reserved
system 00:05: [io  0x0500-0x053f] has been reserved
system 00:05: [io  0x164e-0x164f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfeb00000-0xfeb03fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
pci 0000:00:01.0: BAR 15: assigned [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xd9000000-0xd91fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xd9200000-0xd93fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xd9400000-0xd95fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xd9600000-0xd97fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0:   bridge window [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.0:   bridge window [mem 0xd7900000-0xd8cfffff]
pci 0000:00:1c.0:   bridge window [mem 0xd9000000-0xd91fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.1:   bridge window [mem 0xd6500000-0xd78fffff]
pci 0000:00:1c.1:   bridge window [mem 0xd9200000-0xd93fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.2:   bridge window [mem 0xd5100000-0xd64fffff]
pci 0000:00:1c.2:   bridge window [mem 0xd9400000-0xd95fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3:   bridge window [io  0x9000-0x9fff]
pci 0000:00:1c.3:   bridge window [mem 0xd3100000-0xd50fffff]
pci 0000:00:1c.3:   bridge window [mem 0xd9600000-0xd97fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd30fffff]
pci_bus 0000:01: resource 2 [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xd7900000-0xd8cfffff]
pci_bus 0000:02: resource 2 [mem 0xd9000000-0xd91fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xd6500000-0xd78fffff]
pci_bus 0000:03: resource 2 [mem 0xd9200000-0xd93fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd64fffff]
pci_bus 0000:04: resource 2 [mem 0xd9400000-0xd95fffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:05: resource 1 [mem 0xd3100000-0xd50fffff]
pci_bus 0000:05: resource 2 [mem 0xd9600000-0xd97fffff 64bit pref]
pci_bus 0000:0d: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:0d: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:0d: resource 13 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1756k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000
software IO TLB at phys 0x5a00000 - 0x9a00000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1290907981.066:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7855
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
intel_idle: MWAIT substates: 0x3122220
intel_idle: does not run on family 6 model 23
ERST: Table is not found!
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2010-11-28 01:33:02 UTC (1290907982)
Initalizing network drop monitor service
Freeing unused kernel memory: 504k freed
udev[38]: starting version 164
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04180 irq 40
ata3: DUMMY
ata4: DUMMY
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ATAPI: Optiarc BD RW BD-5730S, 1.71, max UDMA/100
ata2.00: configured for UDMA/100
ata1.00: ATA-8: TOSHIBA MK3263GSX, FG020A, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK3263GS FG02 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM            Optiarc  BD RW BD-5730S   1.71 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda5): INFO: recovery required on readonly filesystem
EXT4-fs (sda5): write access will be enabled during recovery
EXT4-fs (sda5): orphan cleanup on readonly fs
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226256
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226255
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226252
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226251
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226241
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226214
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226213
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226212
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226211
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226210
EXT4-fs (sda5): 10 orphan inodes deleted
EXT4-fs (sda5): recovery complete
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[958]: starting version 164
fuse init (API version 7.15)
iTCO_vendor_support: vendor-support=0
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (55 C)
ACPI: Invalid active0 threshold
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (55 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
cfg80211: Calling CRDA to update world regulatory domain
sky2: driver version 1.28
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
sky2 0000:02:00.0: irq 41 for MSI/MSI-X
sky2 0000:02:00.0: eth0: addr 00:24:be:85:96:40
input: PC Speaker as /devices/platform/pcspkr/input/input3
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd8d04c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8d04800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e0e0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e0c0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000e0a0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e080
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e060
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e040
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [ADP1] (on-line)
firewire_ohci 0000:04:00.3: PCI INT D -> GSI 17 (level, low) -> IRQ 17
firewire_ohci 0000:04:00.3: setting latency timer to 64
[Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/LNXVIDEO:00/input/input4
ACPI: Video Device [NGFX] (multi-head: yes  rom: no  post: no)
firewire_ohci 0000:04:00.3: irq 42 for MSI/MSI-X
firewire_ohci: Added fw-ohci device 0000:04:00.3, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1
sony-laptop: Sony Notebook Control Driver v0.6.
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ACPI: resource 0000:00:1f.3 [io  0xe000-0xe01f] conflicts with ACPI region SMI1 [io  0x0800-0xffff0803 64bit pref disabled]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
usb 1-2: new high speed USB device using ehci_hcd and address 2
input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input5
input: Sony Vaio Jogdial as /devices/virtual/input/input6
[drm] Initialized drm 1.1.0 20060810
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlagn: Copyright(c) 2003-2010 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
iwlagn 0000:03:00.0: device EEPROM VER=0x11f, CALIB=0x4
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:03:00.0: irq 43 for MSI/MSI-X
usb 2-1: new high speed USB device using ehci_hcd and address 2
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device <unnamed> (05ca:18b5)
input: UVC Camera (05ca:18b5) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
firewire_core: created device fw0: GUID 080046030321aebd, S400
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
usb 7-1: new full speed USB device using uhci_hcd and address 2
phy0: Selected rate control algorithm 'iwl-agn-rs'
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:01:00.0: setting latency timer to 64
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a5500a2)
sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e822] (rev 0)
sdhci-pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:04:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:04:00.0: setting latency timer to 64
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
sdhci-pci 0000:04:00.4: SDHCI controller found [1180:e822] (rev 0)
sdhci-pci 0000:04:00.4: PCI INT C -> GSI 16 (level, low) -> IRQ 16
sdhci-pci 0000:04:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:04:00.4: setting latency timer to 64
Registered led device: mmc1::
mmc1: SDHCI controller on PCI [0000:04:00.4] using DMA
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
hda_codec: ALC262: SKU not ready 0x411111f0
hda_codec: ALC262: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 70.16.27.00
[drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
[drm] nouveau 0000:01:00.0: TMDS table version 2.0
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 010003f3 00010036
[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000000
[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02422362 00020010
[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000
[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[drm] nouveau 0000:01:00.0:   0: 0x00000040: type 0x40 idx 0 tag 0xff
[drm] nouveau 0000:01:00.0:   1: 0x00000100: type 0x00 idx 1 tag 0xff
[drm] nouveau 0000:01:00.0:   2: 0x00001261: type 0x61 idx 2 tag 0x07
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD52B
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input10
generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input11
generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
[drm] nouveau 0000:01:00.0: 0xD84D: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: 0xD851: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: 0xDA0E: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDA3B
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE7C5
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE803
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEA43
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEAA8
usb 8-1: new full speed USB device using uhci_hcd and address 2
[drm] nouveau 0000:01:00.0: 0xEAA8: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
[TTM] Zone  kernel: Available graphics memory: 2011272 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
scsi 4:0:0:0: Direct-Access     CBM      Flash Disk       5.00 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 978944 512-byte logical blocks: (501 MB/478 MiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
[drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[drm] nouveau 0000:01:00.0: allocated 1366x768 fb: 0x40230000, bo ffff88013aefec00
Console: switching to colour frame buffer device 170x48
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:01:00.1: setting latency timer to 64
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: (null)
Adding 2803304k swap on /dev/sda6.  Priority:-1 extents:1 across:2803304k 
xinitrc

(/etc/X11/xinit/xinitrc)

#!/bin/sh

userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap

# merge in defaults and keymaps

if [ -f $sysresources ]; then







    xrdb -merge $sysresources

fi

if [ -f $sysmodmap ]; then
    xmodmap $sysmodmap
fi

if [ -f "$userresources" ]; then







    xrdb -merge "$userresources"

fi

if [ -f "$usermodmap" ]; then
    xmodmap "$usermodmap"
fi

# start some nice programs


if [ -d /etc/X11/xinit/xinitrc.d ] ; then
    for f in /etc/X11/xinit/xinitrc.d/*.sh ; do
        [ -x "$f" ] && . "$f"
    done
    unset f
fi

twm &
xclock -geometry 50x50-1+1 &
xterm -geometry 80x50+494+51 &
xterm -geometry 80x20+494-0 &
exec xterm -geometry 80x66+0+0 -name login

I dont know how to capture the error message that was produced by panic. Thanks in Advance.

EDIT: This happens even if I logout from a Failsafe KDE session

Last edited by sainath (2010-11-28 11:55:01)

Offline

#2 2010-11-28 14:36:44

sainath
Member
Registered: 2010-11-27
Posts: 4

Re: Help!! Kernel panics after installation!!

I tried another fresh install to see if me installing GNOME before messed up anything. The same problem persists, I made another fresh install. I only did a net install with Arch Linux core and haven't yet installed xorg or anything yet (havent even synced pacman yet). Weirdly nouveau is already loaded, this is the output of dmesg,

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010
Command line: root=/dev/sda5 ro
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
 BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bdea7000 (usable)
 BIOS-e820: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
 BIOS-e820: 00000000bdecf000 - 00000000bdee0000 (reserved)
 BIOS-e820: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
 BIOS-e820: 00000000bdee1000 - 00000000bdf08000 (reserved)
 BIOS-e820: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
 BIOS-e820: 00000000bdf09000 - 00000000bdf0a000 (reserved)
 BIOS-e820: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
 BIOS-e820: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
 BIOS-e820: 00000000bdf1a000 - 00000000bdf39000 (reserved)
 BIOS-e820: 00000000bdf39000 - 00000000be000000 (usable)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E7FFF write-through
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 base 0BE000000 mask FFE000000 uncachable
  3 base 100000000 mask FC0000000 write-back
  4 disabled
  5 disabled
  6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbe000 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 000000000009bc00 (usable)
 modified: 000000000009bc00 - 00000000000a0000 (reserved)
 modified: 00000000000e0000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 00000000bdea7000 (usable)
 modified: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
 modified: 00000000bdecf000 - 00000000bdee0000 (reserved)
 modified: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
 modified: 00000000bdee1000 - 00000000bdf08000 (reserved)
 modified: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
 modified: 00000000bdf09000 - 00000000bdf0a000 (reserved)
 modified: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
 modified: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
 modified: 00000000bdf1a000 - 00000000bdf39000 (reserved)
 modified: 00000000bdf39000 - 00000000be000000 (usable)
 modified: 00000000e0000000 - 00000000f0000000 (reserved)
 modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
 modified: 00000000ffe00000 - 0000000100000000 (reserved)
 modified: 0000000100000000 - 0000000140000000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fd690] fd690
init_memory_mapping: 0000000000000000-00000000be000000
 0000000000 - 00be000000 page 2M
kernel direct mapping tables up to be000000 @ 16000-1a000
init_memory_mapping: 0000000100000000-0000000140000000
 0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ 18000-1e000
RAMDISK: 37e39000 - 37ff0000
ACPI: RSDP 00000000000f03b0 00024 (v02   Sony)
ACPI: XSDT 00000000bdf12f10 0005C (v01   Sony     VAIO 20090922 MSFT 00010013)
ACPI: FACP 00000000bdf08a90 000F4 (v04   Sony     VAIO 20090922 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40, using 32 (20100702/tbfadt-486)
ACPI: DSDT 00000000bdf0a010 06831 (v01   Sony     VAIO 20090922 INTL 20051117)
ACPI: FACS 00000000bdf19e40 00040
ACPI: APIC 00000000bdf11f10 0006C (v02   Sony     VAIO 20090922 MSFT 00010013)
ACPI: MCFG 00000000bdf18c90 0003C (v01   Sony     VAIO 20090922 MSFT 00000097)
ACPI: HPET 00000000bdf18c10 00038 (v01   Sony     VAIO 20090922 MSFT 00010013)
ACPI: SLIC 00000000bdf14c10 00176 (v01   Sony     VAIO 20090922 Sony 01000000)
ACPI: SSDT 00000000bdee0590 00505 (v01   Sony     VAIO 20090922 INTL 20051117)
ACPI: SSDT 00000000bdecbc10 002E4 (v01   Sony     VAIO 20090922 INTL 20051117)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
    0: 0x00000010 -> 0x0000009b
    0: 0x00000100 -> 0x000bdea7
    0: 0x000bdf39 -> 0x000be000
    0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1040121
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3923 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 759718 pages, LIFO batch:31
  Normal zone: 3584 pages used for memmap
  Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [19300 - 19aff]
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bdea7000 - 00000000bdecf000
PM: Registered nosave memory: 00000000bdecf000 - 00000000bdee0000
PM: Registered nosave memory: 00000000bdee0000 - 00000000bdee1000
PM: Registered nosave memory: 00000000bdee1000 - 00000000bdf08000
PM: Registered nosave memory: 00000000bdf08000 - 00000000bdf09000
PM: Registered nosave memory: 00000000bdf09000 - 00000000bdf0a000
PM: Registered nosave memory: 00000000bdf0a000 - 00000000bdf14000
PM: Registered nosave memory: 00000000bdf14000 - 00000000bdf1a000
PM: Registered nosave memory: 00000000bdf1a000 - 00000000bdf39000
PM: Registered nosave memory: 00000000be000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at be000000 (gap: be000000:22000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s86016 r8192 d20480 u524288
early_res array is doubled to 128 at [19b00 - 1aaff]
pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1022201
Kernel command line: root=/dev/sda5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (69 early reservations)
  #1 [0001000000 - 00017f99a8]   TEXT DATA BSS
  #2 [0037e39000 - 0037ff0000]         RAMDISK
  #3 [00017fa000 - 00017fa1f8]             BRK
  #4 [00000fd6a0 - 0000100000]   BIOS reserved
  #5 [00000fd690 - 00000fd6a0]    MP-table mpf
  #6 [000009bc00 - 00000fd410]   BIOS reserved
  #7 [00000fd624 - 00000fd690]   BIOS reserved
  #8 [00000fd410 - 00000fd624]    MP-table mpc
  #9 [0000010000 - 0000012000]      TRAMPOLINE
  #10 [0000012000 - 0000016000]     ACPI WAKEUP
  #11 [0000016000 - 0000018000]         PGTABLE
  #12 [0000018000 - 0000019000]         PGTABLE
  #13 [00017fa200 - 00017fb200]         BOOTMEM
  #14 [0000019000 - 0000019300]         BOOTMEM
  #15 [0001ffc000 - 0001ffd000]         BOOTMEM
  #16 [0001ffd000 - 0001ffe000]         BOOTMEM
  #17 [0002000000 - 0005800000]        MEMMAP 0
  #18 [00017fb200 - 0001813200]         BOOTMEM
  #19 [0001813200 - 000182b200]         BOOTMEM
  #20 [000182b200 - 0001843200]         BOOTMEM
  #21 [0001844000 - 0001845000]         BOOTMEM
  #22 [00017f99c0 - 00017f9a01]         BOOTMEM
  #23 [00017f9a40 - 00017f9a83]         BOOTMEM
  #24 [00017f9ac0 - 00017f9ee8]         BOOTMEM
  #25 [00017f9f00 - 00017f9f68]         BOOTMEM
  #26 [00017f9f80 - 00017f9fe8]         BOOTMEM
  #27 [0001843200 - 0001843268]         BOOTMEM
  #28 [0001843280 - 00018432e8]         BOOTMEM
  #29 [0001843300 - 0001843368]         BOOTMEM
  #30 [0001843380 - 00018433e8]         BOOTMEM
  #31 [0001843400 - 0001843468]         BOOTMEM
  #32 [0001843480 - 00018434e8]         BOOTMEM
  #33 [0001843500 - 0001843568]         BOOTMEM
  #34 [0001843580 - 00018435e8]         BOOTMEM
  #35 [0001843600 - 0001843668]         BOOTMEM
  #36 [0001843680 - 00018436e8]         BOOTMEM
  #37 [0001843700 - 0001843768]         BOOTMEM
  #38 [0001843780 - 00018437e8]         BOOTMEM
  #39 [0001843800 - 0001843868]         BOOTMEM
  #40 [0001843880 - 00018438e8]         BOOTMEM
  #41 [0001843900 - 0001843968]         BOOTMEM
  #42 [0001843980 - 00018439e8]         BOOTMEM
  #43 [0001843a00 - 0001843a20]         BOOTMEM
  #44 [0001843a40 - 0001843a60]         BOOTMEM
  #45 [0001843a80 - 0001843aa0]         BOOTMEM
  #46 [0001843ac0 - 0001843ad2]         BOOTMEM
  #47 [0001843b00 - 0001843b12]         BOOTMEM
  #48 [0001a00000 - 0001a1c000]         BOOTMEM
  #49 [0001a80000 - 0001a9c000]         BOOTMEM
  #50 [0001b00000 - 0001b1c000]         BOOTMEM
  #51 [0001b80000 - 0001b9c000]         BOOTMEM
  #52 [0001843b40 - 0001843b48]         BOOTMEM
  #53 [0001843b80 - 0001843b88]         BOOTMEM
  #54 [0001843bc0 - 0001843bd0]         BOOTMEM
  #55 [0001843c00 - 0001843c20]         BOOTMEM
  #56 [0001843c40 - 0001843d70]         BOOTMEM
  #57 [0001843d80 - 0001843dd0]         BOOTMEM
  #58 [0001843e00 - 0001843e50]         BOOTMEM
  #59 [0001845000 - 000184d000]         BOOTMEM
  #60 [0001b9c000 - 0001f9c000]         BOOTMEM
  #61 [0005800000 - 0005a00000]         BOOTMEM
  #62 [0001843e80 - 0001843e88]         BOOTMEM
  #63 [0001843ec0 - 0001843ec8]         BOOTMEM
  #64 [000184d000 - 000184d240]         BOOTMEM
  #65 [0005a00000 - 0009a00000]         BOOTMEM
  #66 [000184d240 - 000186d240]         BOOTMEM
  #67 [000186d240 - 00018ad240]         BOOTMEM
  #68 [000001ab00 - 0000022b00]         BOOTMEM
Memory: 4020284k/5242880k available (3682k kernel code, 1082396k absent, 140200k reserved, 2083k data, 504k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
spurious 8259A interrupt: IRQ7.
Detected 2527.164 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.92 BogoMIPS (lpj=8423880)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
ACPI: Core revision 20100702
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz stepping 0a
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (10112.47 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bdee4c10 00265 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00265 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee2810 007A2 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 007A2 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bdee3d90 000FD (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000FD (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee1f90 00047 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00047 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f 
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io  0xe0e0-0xe0ff]
pci 0000:00:1a.1: reg 20: [io  0xe0c0-0xe0df]
pci 0000:00:1a.2: reg 20: [io  0xe0a0-0xe0bf]
pci 0000:00:1a.7: reg 10: [mem 0xd8d04c00-0xd8d04fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xd8d00000-0xd8d03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0xe080-0xe09f]
pci 0000:00:1d.1: reg 20: [io  0xe060-0xe07f]
pci 0000:00:1d.2: reg 20: [io  0xe040-0xe05f]
pci 0000:00:1d.7: reg 10: [mem 0xd8d04800-0xd8d04bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io  0xe130-0xe137]
pci 0000:00:1f.2: reg 14: [io  0xe120-0xe123]
pci 0000:00:1f.2: reg 18: [io  0xe110-0xe117]
pci 0000:00:1f.2: reg 1c: [io  0xe100-0xe103]
pci 0000:00:1f.2: reg 20: [io  0xe020-0xe03f]
pci 0000:00:1f.2: reg 24: [mem 0xd8d04000-0xd8d047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xd8d05000-0xd8d050ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0xe000-0xe01f]
pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io  0xd000-0xd07f]
pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
pci 0000:01:00.1: reg 10: [mem 0xd3080000-0xd3083fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xd7920000-0xd7923fff 64bit]
pci 0000:02:00.0: reg 18: [io  0xc000-0xc0ff]
pci 0000:02:00.0: reg 30: [mem 0xd7900000-0xd791ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.0:   bridge window [mem 0xd7900000-0xd8cfffff]
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xd6500000-0xd6501fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.1:   bridge window [mem 0xd6500000-0xd78fffff]
pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xd5100a00-0xd5100aff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10: [mem 0xd5100900-0xd51009ff]
pci 0000:04:00.1: supports D1 D2
pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.1: PME# disabled
pci 0000:04:00.3: reg 10: [mem 0xd5100000-0xd51007ff]
pci 0000:04:00.3: supports D1 D2
pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.3: PME# disabled
pci 0000:04:00.4: reg 10: [mem 0xd5100800-0xd51008ff]
pci 0000:04:00.4: supports D1 D2
pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.4: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.2:   bridge window [mem 0xd5100000-0xd64fffff]
pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3:   bridge window [io  0x9000-0x9fff]
pci 0000:00:1c.3:   bridge window [mem 0xd3100000-0xd50fffff]
pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 19 1f 
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009bc00 - 000000000009ffff 
reserve RAM buffer: 00000000bdea7000 - 00000000bfffffff 
reserve RAM buffer: 00000000be000000 - 00000000bfffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:05: [io  0x0680-0x069f] has been reserved
system 00:05: [io  0x1000-0x100f] has been reserved
system 00:05: [io  0x0800-0x0803] has been reserved
system 00:05: [io  0x0400-0x047f] has been reserved
system 00:05: [io  0x0500-0x053f] has been reserved
system 00:05: [io  0x164e-0x164f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfeb00000-0xfeb03fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
pci 0000:00:01.0: BAR 15: assigned [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xd9000000-0xd91fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xd9200000-0xd93fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xd9400000-0xd95fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xd9600000-0xd97fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0:   bridge window [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.0:   bridge window [mem 0xd7900000-0xd8cfffff]
pci 0000:00:1c.0:   bridge window [mem 0xd9000000-0xd91fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.1:   bridge window [mem 0xd6500000-0xd78fffff]
pci 0000:00:1c.1:   bridge window [mem 0xd9200000-0xd93fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.2:   bridge window [mem 0xd5100000-0xd64fffff]
pci 0000:00:1c.2:   bridge window [mem 0xd9400000-0xd95fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3:   bridge window [io  0x9000-0x9fff]
pci 0000:00:1c.3:   bridge window [mem 0xd3100000-0xd50fffff]
pci 0000:00:1c.3:   bridge window [mem 0xd9600000-0xd97fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd30fffff]
pci_bus 0000:01: resource 2 [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xd7900000-0xd8cfffff]
pci_bus 0000:02: resource 2 [mem 0xd9000000-0xd91fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xd6500000-0xd78fffff]
pci_bus 0000:03: resource 2 [mem 0xd9200000-0xd93fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd64fffff]
pci_bus 0000:04: resource 2 [mem 0xd9400000-0xd95fffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:05: resource 1 [mem 0xd3100000-0xd50fffff]
pci_bus 0000:05: resource 2 [mem 0xd9600000-0xd97fffff 64bit pref]
pci_bus 0000:0d: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:0d: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:0d: resource 13 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1756k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000
software IO TLB at phys 0x5a00000 - 0x9a00000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1290893788.056:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7855
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
intel_idle: MWAIT substates: 0x3122220
intel_idle: does not run on family 6 model 23
ERST: Table is not found!
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2010-11-27 21:36:28 UTC (1290893788)
Initalizing network drop monitor service
Freeing unused kernel memory: 504k freed
udev[38]: starting version 164
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04180 irq 40
ata3: DUMMY
ata4: DUMMY
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ATAPI: Optiarc BD RW BD-5730S, 1.71, max UDMA/100
ata2.00: configured for UDMA/100
ata1.00: ATA-8: TOSHIBA MK3263GSX, FG020A, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK3263GS FG02 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM            Optiarc  BD RW BD-5730S   1.71 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[949]: starting version 164
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sony-laptop: Sony Notebook Control Driver v0.6.
ACPI: WMI: Mapper loaded
input: PC Speaker as /devices/platform/pcspkr/input/input1
ACPI: AC Adapter [ADP1] (on-line)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (56 C)
input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input2
ACPI: Invalid active0 threshold
ACPI: acpi_idle registered with cpuidle
input: Sony Vaio Jogdial as /devices/virtual/input/input3
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (56 C)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Switching to clocksource hpet
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
cfg80211: Calling CRDA to update world regulatory domain
sky2: driver version 1.28
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
sky2 0000:02:00.0: irq 41 for MSI/MSI-X
sky2 0000:02:00.0: eth0: addr 00:24:be:85:96:40
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd8d04c00
uhci_hcd: USB Universal Host Controller Interface driver
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8d04800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e0e0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e0c0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000e0a0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e080
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e060
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e040
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
[Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/LNXVIDEO:00/input/input4
ACPI: Video Device [NGFX] (multi-head: yes  rom: no  post: no)
ACPI: Battery Slot [BAT0] (battery present)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
ACPI: Power Button [PWRB]
usb 1-2: new high speed USB device using ehci_hcd and address 2
firewire_ohci 0000:04:00.3: PCI INT D -> GSI 17 (level, low) -> IRQ 17
firewire_ohci 0000:04:00.3: setting latency timer to 64
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ACPI: resource 0000:00:1f.3 [io  0xe000-0xe01f] conflicts with ACPI region SMI1 [io  0x0800-0xffff0803 64bit pref disabled]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
firewire_ohci 0000:04:00.3: irq 42 for MSI/MSI-X
firewire_ohci: Added fw-ohci device 0000:04:00.3, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1
usb 2-1: new high speed USB device using ehci_hcd and address 2
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
[drm] Initialized drm 1.1.0 20060810
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlagn: Copyright(c) 2003-2010 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
iwlagn 0000:03:00.0: device EEPROM VER=0x11f, CALIB=0x4
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:03:00.0: irq 44 for MSI/MSI-X
sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e822] (rev 0)
sdhci-pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:04:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:04:00.0: setting latency timer to 64
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
sdhci-pci 0000:04:00.4: SDHCI controller found [1180:e822] (rev 0)
sdhci-pci 0000:04:00.4: PCI INT C -> GSI 16 (level, low) -> IRQ 16
sdhci-pci 0000:04:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:04:00.4: setting latency timer to 64
Registered led device: mmc1::
mmc1: SDHCI controller on PCI [0000:04:00.4] using DMA
firewire_core: created device fw0: GUID 080046030321aebd, S400
hda_codec: ALC262: SKU not ready 0x411111f0
hda_codec: ALC262: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:01:00.1: setting latency timer to 64
usb 7-1: new full speed USB device using uhci_hcd and address 2
iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device <unnamed> (05ca:18b5)
input: UVC Camera (05ca:18b5) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
phy0: Selected rate control algorithm 'iwl-agn-rs'
usbcore: registered new interface driver hiddev
usb 8-1: new full speed USB device using uhci_hcd and address 2
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input10
generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input11
generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
scsi 4:0:0:0: Direct-Access     CBM      Flash Disk       5.00 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 978944 512-byte logical blocks: (501 MB/478 MiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a5500a2)
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 70.16.27.00
[drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
[drm] nouveau 0000:01:00.0: TMDS table version 2.0
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 010003f3 00010036
[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000000
[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02422362 00020010
[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000
[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[drm] nouveau 0000:01:00.0:   0: 0x00000040: type 0x40 idx 0 tag 0xff
[drm] nouveau 0000:01:00.0:   1: 0x00000100: type 0x00 idx 1 tag 0xff
[drm] nouveau 0000:01:00.0:   2: 0x00001261: type 0x61 idx 2 tag 0x07
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD52B
[drm] nouveau 0000:01:00.0: 0xD84D: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: 0xD851: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: 0xDA0E: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDA3B
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE7C5
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE803
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEA43
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEAA8
[drm] nouveau 0000:01:00.0: 0xEAA8: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
[TTM] Zone  kernel: Available graphics memory: 2011272 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[drm] nouveau 0000:01:00.0: allocated 1366x768 fb: 0x40230000, bo ffff88013bfac400
Console: switching to colour frame buffer device 170x48
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: (null)
Adding 2803304k swap on /dev/sda6.  Priority:-1 extents:1 across:2803304k 
wlan0: authenticate with 94:44:52:78:c1:98 (try 1)
wlan0: authenticated
wlan0: associate with 94:44:52:78:c1:98 (try 1)
wlan0: RX AssocResp from 94:44:52:78:c1:98 (capab=0x411 status=0 aid=1)
wlan0: associated
Intel AES-NI instructions are not detected.
padlock: VIA PadLock not detected.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010
Command line: root=/dev/sda5 ro
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
 BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bdea7000 (usable)
 BIOS-e820: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
 BIOS-e820: 00000000bdecf000 - 00000000bdee0000 (reserved)
 BIOS-e820: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
 BIOS-e820: 00000000bdee1000 - 00000000bdf08000 (reserved)
 BIOS-e820: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
 BIOS-e820: 00000000bdf09000 - 00000000bdf0a000 (reserved)
 BIOS-e820: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
 BIOS-e820: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
 BIOS-e820: 00000000bdf1a000 - 00000000bdf39000 (reserved)
 BIOS-e820: 00000000bdf39000 - 00000000be000000 (usable)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E7FFF write-through
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 base 0BE000000 mask FFE000000 uncachable
  3 base 100000000 mask FC0000000 write-back
  4 disabled
  5 disabled
  6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbe000 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 000000000009bc00 (usable)
 modified: 000000000009bc00 - 00000000000a0000 (reserved)
 modified: 00000000000e0000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 00000000bdea7000 (usable)
 modified: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
 modified: 00000000bdecf000 - 00000000bdee0000 (reserved)
 modified: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
 modified: 00000000bdee1000 - 00000000bdf08000 (reserved)
 modified: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
 modified: 00000000bdf09000 - 00000000bdf0a000 (reserved)
 modified: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
 modified: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
 modified: 00000000bdf1a000 - 00000000bdf39000 (reserved)
 modified: 00000000bdf39000 - 00000000be000000 (usable)
 modified: 00000000e0000000 - 00000000f0000000 (reserved)
 modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
 modified: 00000000ffe00000 - 0000000100000000 (reserved)
 modified: 0000000100000000 - 0000000140000000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fd690] fd690
init_memory_mapping: 0000000000000000-00000000be000000
 0000000000 - 00be000000 page 2M
kernel direct mapping tables up to be000000 @ 16000-1a000
init_memory_mapping: 0000000100000000-0000000140000000
 0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ 18000-1e000
RAMDISK: 37e39000 - 37ff0000
ACPI: RSDP 00000000000f03b0 00024 (v02   Sony)
ACPI: XSDT 00000000bdf12f10 0005C (v01   Sony     VAIO 20090922 MSFT 00010013)
ACPI: FACP 00000000bdf08a90 000F4 (v04   Sony     VAIO 20090922 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40, using 32 (20100702/tbfadt-486)
ACPI: DSDT 00000000bdf0a010 06831 (v01   Sony     VAIO 20090922 INTL 20051117)
ACPI: FACS 00000000bdf19e40 00040
ACPI: APIC 00000000bdf11f10 0006C (v02   Sony     VAIO 20090922 MSFT 00010013)
ACPI: MCFG 00000000bdf18c90 0003C (v01   Sony     VAIO 20090922 MSFT 00000097)
ACPI: HPET 00000000bdf18c10 00038 (v01   Sony     VAIO 20090922 MSFT 00010013)
ACPI: SLIC 00000000bdf14c10 00176 (v01   Sony     VAIO 20090922 Sony 01000000)
ACPI: SSDT 00000000bdee0590 00505 (v01   Sony     VAIO 20090922 INTL 20051117)
ACPI: SSDT 00000000bdecbc10 002E4 (v01   Sony     VAIO 20090922 INTL 20051117)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
    0: 0x00000010 -> 0x0000009b
    0: 0x00000100 -> 0x000bdea7
    0: 0x000bdf39 -> 0x000be000
    0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1040121
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3923 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 759718 pages, LIFO batch:31
  Normal zone: 3584 pages used for memmap
  Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [19300 - 19aff]
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bdea7000 - 00000000bdecf000
PM: Registered nosave memory: 00000000bdecf000 - 00000000bdee0000
PM: Registered nosave memory: 00000000bdee0000 - 00000000bdee1000
PM: Registered nosave memory: 00000000bdee1000 - 00000000bdf08000
PM: Registered nosave memory: 00000000bdf08000 - 00000000bdf09000
PM: Registered nosave memory: 00000000bdf09000 - 00000000bdf0a000
PM: Registered nosave memory: 00000000bdf0a000 - 00000000bdf14000
PM: Registered nosave memory: 00000000bdf14000 - 00000000bdf1a000
PM: Registered nosave memory: 00000000bdf1a000 - 00000000bdf39000
PM: Registered nosave memory: 00000000be000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at be000000 (gap: be000000:22000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s86016 r8192 d20480 u524288
early_res array is doubled to 128 at [19b00 - 1aaff]
pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1022201
Kernel command line: root=/dev/sda5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (69 early reservations)
  #1 [0001000000 - 00017f99a8]   TEXT DATA BSS
  #2 [0037e39000 - 0037ff0000]         RAMDISK
  #3 [00017fa000 - 00017fa1f8]             BRK
  #4 [00000fd6a0 - 0000100000]   BIOS reserved
  #5 [00000fd690 - 00000fd6a0]    MP-table mpf
  #6 [000009bc00 - 00000fd410]   BIOS reserved
  #7 [00000fd624 - 00000fd690]   BIOS reserved
  #8 [00000fd410 - 00000fd624]    MP-table mpc
  #9 [0000010000 - 0000012000]      TRAMPOLINE
  #10 [0000012000 - 0000016000]     ACPI WAKEUP
  #11 [0000016000 - 0000018000]         PGTABLE
  #12 [0000018000 - 0000019000]         PGTABLE
  #13 [00017fa200 - 00017fb200]         BOOTMEM
  #14 [0000019000 - 0000019300]         BOOTMEM
  #15 [0001ffc000 - 0001ffd000]         BOOTMEM
  #16 [0001ffd000 - 0001ffe000]         BOOTMEM
  #17 [0002000000 - 0005800000]        MEMMAP 0
  #18 [00017fb200 - 0001813200]         BOOTMEM
  #19 [0001813200 - 000182b200]         BOOTMEM
  #20 [000182b200 - 0001843200]         BOOTMEM
  #21 [0001844000 - 0001845000]         BOOTMEM
  #22 [00017f99c0 - 00017f9a01]         BOOTMEM
  #23 [00017f9a40 - 00017f9a83]         BOOTMEM
  #24 [00017f9ac0 - 00017f9ee8]         BOOTMEM
  #25 [00017f9f00 - 00017f9f68]         BOOTMEM
  #26 [00017f9f80 - 00017f9fe8]         BOOTMEM
  #27 [0001843200 - 0001843268]         BOOTMEM
  #28 [0001843280 - 00018432e8]         BOOTMEM
  #29 [0001843300 - 0001843368]         BOOTMEM
  #30 [0001843380 - 00018433e8]         BOOTMEM
  #31 [0001843400 - 0001843468]         BOOTMEM
  #32 [0001843480 - 00018434e8]         BOOTMEM
  #33 [0001843500 - 0001843568]         BOOTMEM
  #34 [0001843580 - 00018435e8]         BOOTMEM
  #35 [0001843600 - 0001843668]         BOOTMEM
  #36 [0001843680 - 00018436e8]         BOOTMEM
  #37 [0001843700 - 0001843768]         BOOTMEM
  #38 [0001843780 - 00018437e8]         BOOTMEM
  #39 [0001843800 - 0001843868]         BOOTMEM
  #40 [0001843880 - 00018438e8]         BOOTMEM
  #41 [0001843900 - 0001843968]         BOOTMEM
  #42 [0001843980 - 00018439e8]         BOOTMEM
  #43 [0001843a00 - 0001843a20]         BOOTMEM
  #44 [0001843a40 - 0001843a60]         BOOTMEM
  #45 [0001843a80 - 0001843aa0]         BOOTMEM
  #46 [0001843ac0 - 0001843ad2]         BOOTMEM
  #47 [0001843b00 - 0001843b12]         BOOTMEM
  #48 [0001a00000 - 0001a1c000]         BOOTMEM
  #49 [0001a80000 - 0001a9c000]         BOOTMEM
  #50 [0001b00000 - 0001b1c000]         BOOTMEM
  #51 [0001b80000 - 0001b9c000]         BOOTMEM
  #52 [0001843b40 - 0001843b48]         BOOTMEM
  #53 [0001843b80 - 0001843b88]         BOOTMEM
  #54 [0001843bc0 - 0001843bd0]         BOOTMEM
  #55 [0001843c00 - 0001843c20]         BOOTMEM
  #56 [0001843c40 - 0001843d70]         BOOTMEM
  #57 [0001843d80 - 0001843dd0]         BOOTMEM
  #58 [0001843e00 - 0001843e50]         BOOTMEM
  #59 [0001845000 - 000184d000]         BOOTMEM
  #60 [0001b9c000 - 0001f9c000]         BOOTMEM
  #61 [0005800000 - 0005a00000]         BOOTMEM
  #62 [0001843e80 - 0001843e88]         BOOTMEM
  #63 [0001843ec0 - 0001843ec8]         BOOTMEM
  #64 [000184d000 - 000184d240]         BOOTMEM
  #65 [0005a00000 - 0009a00000]         BOOTMEM
  #66 [000184d240 - 000186d240]         BOOTMEM
  #67 [000186d240 - 00018ad240]         BOOTMEM
  #68 [000001ab00 - 0000022b00]         BOOTMEM
Memory: 4020284k/5242880k available (3682k kernel code, 1082396k absent, 140200k reserved, 2083k data, 504k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
spurious 8259A interrupt: IRQ7.
Detected 2527.035 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.65 BogoMIPS (lpj=8423450)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
ACPI: Core revision 20100702
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz stepping 0a
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (10112.21 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bdee4c10 00265 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00265 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee2810 007A2 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 007A2 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bdee3d90 000FD (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000FD (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee1f90 00047 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00047 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f 
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io  0xe0e0-0xe0ff]
pci 0000:00:1a.1: reg 20: [io  0xe0c0-0xe0df]
pci 0000:00:1a.2: reg 20: [io  0xe0a0-0xe0bf]
pci 0000:00:1a.7: reg 10: [mem 0xd8d04c00-0xd8d04fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xd8d00000-0xd8d03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0xe080-0xe09f]
pci 0000:00:1d.1: reg 20: [io  0xe060-0xe07f]
pci 0000:00:1d.2: reg 20: [io  0xe040-0xe05f]
pci 0000:00:1d.7: reg 10: [mem 0xd8d04800-0xd8d04bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io  0xe130-0xe137]
pci 0000:00:1f.2: reg 14: [io  0xe120-0xe123]
pci 0000:00:1f.2: reg 18: [io  0xe110-0xe117]
pci 0000:00:1f.2: reg 1c: [io  0xe100-0xe103]
pci 0000:00:1f.2: reg 20: [io  0xe020-0xe03f]
pci 0000:00:1f.2: reg 24: [mem 0xd8d04000-0xd8d047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xd8d05000-0xd8d050ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0xe000-0xe01f]
pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io  0xd000-0xd07f]
pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
pci 0000:01:00.1: reg 10: [mem 0xd3080000-0xd3083fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xd7920000-0xd7923fff 64bit]
pci 0000:02:00.0: reg 18: [io  0xc000-0xc0ff]
pci 0000:02:00.0: reg 30: [mem 0xd7900000-0xd791ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.0:   bridge window [mem 0xd7900000-0xd8cfffff]
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xd6500000-0xd6501fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.1:   bridge window [mem 0xd6500000-0xd78fffff]
pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xd5100a00-0xd5100aff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10: [mem 0xd5100900-0xd51009ff]
pci 0000:04:00.1: supports D1 D2
pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.1: PME# disabled
pci 0000:04:00.3: reg 10: [mem 0xd5100000-0xd51007ff]
pci 0000:04:00.3: supports D1 D2
pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.3: PME# disabled
pci 0000:04:00.4: reg 10: [mem 0xd5100800-0xd51008ff]
pci 0000:04:00.4: supports D1 D2
pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.4: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.2:   bridge window [mem 0xd5100000-0xd64fffff]
pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3:   bridge window [io  0x9000-0x9fff]
pci 0000:00:1c.3:   bridge window [mem 0xd3100000-0xd50fffff]
pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 19 1f 
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009bc00 - 000000000009ffff 
reserve RAM buffer: 00000000bdea7000 - 00000000bfffffff 
reserve RAM buffer: 00000000be000000 - 00000000bfffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:05: [io  0x0680-0x069f] has been reserved
system 00:05: [io  0x1000-0x100f] has been reserved
system 00:05: [io  0x0800-0x0803] has been reserved
system 00:05: [io  0x0400-0x047f] has been reserved
system 00:05: [io  0x0500-0x053f] has been reserved
system 00:05: [io  0x164e-0x164f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfeb00000-0xfeb03fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
pci 0000:00:01.0: BAR 15: assigned [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xd9000000-0xd91fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xd9200000-0xd93fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xd9400000-0xd95fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xd9600000-0xd97fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0:   bridge window [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.0:   bridge window [mem 0xd7900000-0xd8cfffff]
pci 0000:00:1c.0:   bridge window [mem 0xd9000000-0xd91fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.1:   bridge window [mem 0xd6500000-0xd78fffff]
pci 0000:00:1c.1:   bridge window [mem 0xd9200000-0xd93fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.2:   bridge window [mem 0xd5100000-0xd64fffff]
pci 0000:00:1c.2:   bridge window [mem 0xd9400000-0xd95fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3:   bridge window [io  0x9000-0x9fff]
pci 0000:00:1c.3:   bridge window [mem 0xd3100000-0xd50fffff]
pci 0000:00:1c.3:   bridge window [mem 0xd9600000-0xd97fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd30fffff]
pci_bus 0000:01: resource 2 [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xd7900000-0xd8cfffff]
pci_bus 0000:02: resource 2 [mem 0xd9000000-0xd91fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xd6500000-0xd78fffff]
pci_bus 0000:03: resource 2 [mem 0xd9200000-0xd93fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd64fffff]
pci_bus 0000:04: resource 2 [mem 0xd9400000-0xd95fffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:05: resource 1 [mem 0xd3100000-0xd50fffff]
pci_bus 0000:05: resource 2 [mem 0xd9600000-0xd97fffff 64bit pref]
pci_bus 0000:0d: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:0d: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:0d: resource 13 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1756k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000
software IO TLB at phys 0x5a00000 - 0x9a00000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1290894064.563:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7855
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
intel_idle: MWAIT substates: 0x3122220
intel_idle: does not run on family 6 model 23
ERST: Table is not found!
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2010-11-27 21:41:05 UTC (1290894065)
Initalizing network drop monitor service
Freeing unused kernel memory: 504k freed
udev[38]: starting version 164
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04180 irq 40
ata3: DUMMY
ata4: DUMMY
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ATAPI: Optiarc BD RW BD-5730S, 1.71, max UDMA/100
ata2.00: configured for UDMA/100
ata1.00: ATA-8: TOSHIBA MK3263GSX, FG020A, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK3263GS FG02 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM            Optiarc  BD RW BD-5730S   1.71 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[920]: starting version 164
ACPI: WMI: Mapper loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ACPI: resource 0000:00:1f.3 [io  0xe000-0xe01f] conflicts with ACPI region SMI1 [io  0x0800-0xffff0803 64bit pref disabled]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sony-laptop: Sony Notebook Control Driver v0.6.
input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input1
input: Sony Vaio Jogdial as /devices/virtual/input/input2
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
cfg80211: Calling CRDA to update world regulatory domain
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (55 C)
ACPI: Invalid active0 threshold
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (55 C)
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sky2: driver version 1.28
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
sky2 0000:02:00.0: irq 41 for MSI/MSI-X
sky2 0000:02:00.0: eth0: addr 00:24:be:85:96:40
input: PC Speaker as /devices/platform/pcspkr/input/input3
firewire_ohci 0000:04:00.3: PCI INT D -> GSI 17 (level, low) -> IRQ 17
firewire_ohci 0000:04:00.3: setting latency timer to 64
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
firewire_ohci 0000:04:00.3: irq 42 for MSI/MSI-X
firewire_ohci: Added fw-ohci device 0000:04:00.3, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd8d04c00
uhci_hcd: USB Universal Host Controller Interface driver
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8d04800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e0e0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e0c0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000e0a0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e080
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e060
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e040
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
[Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/LNXVIDEO:00/input/input4
ACPI: Video Device [NGFX] (multi-head: yes  rom: no  post: no)
ACPI: Battery Slot [BAT0] (battery present)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
ACPI: Power Button [PWRB]
ACPI: AC Adapter [ADP1] (on-line)
usb 1-2: new high speed USB device using ehci_hcd and address 2
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e822] (rev 0)
sdhci-pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:04:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:04:00.0: setting latency timer to 64
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
sdhci-pci 0000:04:00.4: SDHCI controller found [1180:e822] (rev 0)
sdhci-pci 0000:04:00.4: PCI INT C -> GSI 16 (level, low) -> IRQ 16
sdhci-pci 0000:04:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:04:00.4: setting latency timer to 64
Registered led device: mmc1::
mmc1: SDHCI controller on PCI [0000:04:00.4] using DMA
firewire_core: created device fw0: GUID 080046030321aebd, S400
usb 2-1: new high speed USB device using ehci_hcd and address 2
[drm] Initialized drm 1.1.0 20060810
hda_codec: ALC262: SKU not ready 0x411111f0
hda_codec: ALC262: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:01:00.1: setting latency timer to 64
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlagn: Copyright(c) 2003-2010 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
iwlagn 0000:03:00.0: device EEPROM VER=0x11f, CALIB=0x4
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:03:00.0: irq 44 for MSI/MSI-X
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device <unnamed> (05ca:18b5)
input: UVC Camera (05ca:18b5) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
usb 7-1: new full speed USB device using uhci_hcd and address 2
phy0: Selected rate control algorithm 'iwl-agn-rs'
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a5500a2)
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input10
generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input11
generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 8-1: new full speed USB device using uhci_hcd and address 2
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 70.16.27.00
[drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
[drm] nouveau 0000:01:00.0: TMDS table version 2.0
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 010003f3 00010036
[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000000
[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02422362 00020010
[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000
[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[drm] nouveau 0000:01:00.0:   0: 0x00000040: type 0x40 idx 0 tag 0xff
[drm] nouveau 0000:01:00.0:   1: 0x00000100: type 0x00 idx 1 tag 0xff
[drm] nouveau 0000:01:00.0:   2: 0x00001261: type 0x61 idx 2 tag 0x07
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD52B
[drm] nouveau 0000:01:00.0: 0xD84D: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: 0xD851: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: 0xDA0E: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDA3B
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE7C5
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE803
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEA43
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEAA8
[drm] nouveau 0000:01:00.0: 0xEAA8: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
[TTM] Zone  kernel: Available graphics memory: 2011272 kiB.
[TTM] Initializing pool allocator.
scsi 4:0:0:0: Direct-Access     CBM      Flash Disk       5.00 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 978944 512-byte logical blocks: (501 MB/478 MiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
[drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[drm] nouveau 0000:01:00.0: allocated 1366x768 fb: 0x40230000, bo ffff8801371d4000
Console: switching to colour frame buffer device 170x48
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: (null)
Adding 2803304k swap on /dev/sda6.  Priority:-1 extents:1 across:2803304k 
wlan0: authenticate with 94:44:52:78:c1:98 (try 1)
wlan0: authenticated
wlan0: associate with 94:44:52:78:c1:98 (try 1)
wlan0: RX AssocResp from 94:44:52:78:c1:98 (capab=0x411 status=0 aid=1)
wlan0: associated
Intel AES-NI instructions are not detected.
padlock: VIA PadLock not detected.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010
Command line: root=/dev/sda5 ro
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
 BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bdea7000 (usable)
 BIOS-e820: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
 BIOS-e820: 00000000bdecf000 - 00000000bdee0000 (reserved)
 BIOS-e820: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
 BIOS-e820: 00000000bdee1000 - 00000000bdf08000 (reserved)
 BIOS-e820: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
 BIOS-e820: 00000000bdf09000 - 00000000bdf0a000 (reserved)
 BIOS-e820: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
 BIOS-e820: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
 BIOS-e820: 00000000bdf1a000 - 00000000bdf39000 (reserved)
 BIOS-e820: 00000000bdf39000 - 00000000be000000 (usable)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E7FFF write-through
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 base 0BE000000 mask FFE000000 uncachable
  3 base 100000000 mask FC0000000 write-back
  4 disabled
  5 disabled
  6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbe000 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 000000000009bc00 (usable)
 modified: 000000000009bc00 - 00000000000a0000 (reserved)
 modified: 00000000000e0000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 00000000bdea7000 (usable)
 modified: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
 modified: 00000000bdecf000 - 00000000bdee0000 (reserved)
 modified: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
 modified: 00000000bdee1000 - 00000000bdf08000 (reserved)
 modified: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
 modified: 00000000bdf09000 - 00000000bdf0a000 (reserved)
 modified: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
 modified: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
 modified: 00000000bdf1a000 - 00000000bdf39000 (reserved)
 modified: 00000000bdf39000 - 00000000be000000 (usable)
 modified: 00000000e0000000 - 00000000f0000000 (reserved)
 modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
 modified: 00000000ffe00000 - 0000000100000000 (reserved)
 modified: 0000000100000000 - 0000000140000000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fd690] fd690
init_memory_mapping: 0000000000000000-00000000be000000
 0000000000 - 00be000000 page 2M
kernel direct mapping tables up to be000000 @ 16000-1a000
init_memory_mapping: 0000000100000000-0000000140000000
 0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ 18000-1e000
RAMDISK: 37e39000 - 37ff0000
ACPI: RSDP 00000000000f03b0 00024 (v02   Sony)
ACPI: XSDT 00000000bdf12f10 0005C (v01   Sony     VAIO 20090922 MSFT 00010013)
ACPI: FACP 00000000bdf08a90 000F4 (v04   Sony     VAIO 20090922 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40, using 32 (20100702/tbfadt-486)
ACPI: DSDT 00000000bdf0a010 06831 (v01   Sony     VAIO 20090922 INTL 20051117)
ACPI: FACS 00000000bdf19e40 00040
ACPI: APIC 00000000bdf11f10 0006C (v02   Sony     VAIO 20090922 MSFT 00010013)
ACPI: MCFG 00000000bdf18c90 0003C (v01   Sony     VAIO 20090922 MSFT 00000097)
ACPI: HPET 00000000bdf18c10 00038 (v01   Sony     VAIO 20090922 MSFT 00010013)
ACPI: SLIC 00000000bdf14c10 00176 (v01   Sony     VAIO 20090922 Sony 01000000)
ACPI: SSDT 00000000bdee0590 00505 (v01   Sony     VAIO 20090922 INTL 20051117)
ACPI: SSDT 00000000bdecbc10 002E4 (v01   Sony     VAIO 20090922 INTL 20051117)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
    0: 0x00000010 -> 0x0000009b
    0: 0x00000100 -> 0x000bdea7
    0: 0x000bdf39 -> 0x000be000
    0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1040121
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3923 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 759718 pages, LIFO batch:31
  Normal zone: 3584 pages used for memmap
  Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [19300 - 19aff]
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bdea7000 - 00000000bdecf000
PM: Registered nosave memory: 00000000bdecf000 - 00000000bdee0000
PM: Registered nosave memory: 00000000bdee0000 - 00000000bdee1000
PM: Registered nosave memory: 00000000bdee1000 - 00000000bdf08000
PM: Registered nosave memory: 00000000bdf08000 - 00000000bdf09000
PM: Registered nosave memory: 00000000bdf09000 - 00000000bdf0a000
PM: Registered nosave memory: 00000000bdf0a000 - 00000000bdf14000
PM: Registered nosave memory: 00000000bdf14000 - 00000000bdf1a000
PM: Registered nosave memory: 00000000bdf1a000 - 00000000bdf39000
PM: Registered nosave memory: 00000000be000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at be000000 (gap: be000000:22000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s86016 r8192 d20480 u524288
early_res array is doubled to 128 at [19b00 - 1aaff]
pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1022201
Kernel command line: root=/dev/sda5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (69 early reservations)
  #1 [0001000000 - 00017f99a8]   TEXT DATA BSS
  #2 [0037e39000 - 0037ff0000]         RAMDISK
  #3 [00017fa000 - 00017fa1f8]             BRK
  #4 [00000fd6a0 - 0000100000]   BIOS reserved
  #5 [00000fd690 - 00000fd6a0]    MP-table mpf
  #6 [000009bc00 - 00000fd410]   BIOS reserved
  #7 [00000fd624 - 00000fd690]   BIOS reserved
  #8 [00000fd410 - 00000fd624]    MP-table mpc
  #9 [0000010000 - 0000012000]      TRAMPOLINE
  #10 [0000012000 - 0000016000]     ACPI WAKEUP
  #11 [0000016000 - 0000018000]         PGTABLE
  #12 [0000018000 - 0000019000]         PGTABLE
  #13 [00017fa200 - 00017fb200]         BOOTMEM
  #14 [0000019000 - 0000019300]         BOOTMEM
  #15 [0001ffc000 - 0001ffd000]         BOOTMEM
  #16 [0001ffd000 - 0001ffe000]         BOOTMEM
  #17 [0002000000 - 0005800000]        MEMMAP 0
  #18 [00017fb200 - 0001813200]         BOOTMEM
  #19 [0001813200 - 000182b200]         BOOTMEM
  #20 [000182b200 - 0001843200]         BOOTMEM
  #21 [0001844000 - 0001845000]         BOOTMEM
  #22 [00017f99c0 - 00017f9a01]         BOOTMEM
  #23 [00017f9a40 - 00017f9a83]         BOOTMEM
  #24 [00017f9ac0 - 00017f9ee8]         BOOTMEM
  #25 [00017f9f00 - 00017f9f68]         BOOTMEM
  #26 [00017f9f80 - 00017f9fe8]         BOOTMEM
  #27 [0001843200 - 0001843268]         BOOTMEM
  #28 [0001843280 - 00018432e8]         BOOTMEM
  #29 [0001843300 - 0001843368]         BOOTMEM
  #30 [0001843380 - 00018433e8]         BOOTMEM
  #31 [0001843400 - 0001843468]         BOOTMEM
  #32 [0001843480 - 00018434e8]         BOOTMEM
  #33 [0001843500 - 0001843568]         BOOTMEM
  #34 [0001843580 - 00018435e8]         BOOTMEM
  #35 [0001843600 - 0001843668]         BOOTMEM
  #36 [0001843680 - 00018436e8]         BOOTMEM
  #37 [0001843700 - 0001843768]         BOOTMEM
  #38 [0001843780 - 00018437e8]         BOOTMEM
  #39 [0001843800 - 0001843868]         BOOTMEM
  #40 [0001843880 - 00018438e8]         BOOTMEM
  #41 [0001843900 - 0001843968]         BOOTMEM
  #42 [0001843980 - 00018439e8]         BOOTMEM
  #43 [0001843a00 - 0001843a20]         BOOTMEM
  #44 [0001843a40 - 0001843a60]         BOOTMEM
  #45 [0001843a80 - 0001843aa0]         BOOTMEM
  #46 [0001843ac0 - 0001843ad2]         BOOTMEM
  #47 [0001843b00 - 0001843b12]         BOOTMEM
  #48 [0001a00000 - 0001a1c000]         BOOTMEM
  #49 [0001a80000 - 0001a9c000]         BOOTMEM
  #50 [0001b00000 - 0001b1c000]         BOOTMEM
  #51 [0001b80000 - 0001b9c000]         BOOTMEM
  #52 [0001843b40 - 0001843b48]         BOOTMEM
  #53 [0001843b80 - 0001843b88]         BOOTMEM
  #54 [0001843bc0 - 0001843bd0]         BOOTMEM
  #55 [0001843c00 - 0001843c20]         BOOTMEM
  #56 [0001843c40 - 0001843d70]         BOOTMEM
  #57 [0001843d80 - 0001843dd0]         BOOTMEM
  #58 [0001843e00 - 0001843e50]         BOOTMEM
  #59 [0001845000 - 000184d000]         BOOTMEM
  #60 [0001b9c000 - 0001f9c000]         BOOTMEM
  #61 [0005800000 - 0005a00000]         BOOTMEM
  #62 [0001843e80 - 0001843e88]         BOOTMEM
  #63 [0001843ec0 - 0001843ec8]         BOOTMEM
  #64 [000184d000 - 000184d240]         BOOTMEM
  #65 [0005a00000 - 0009a00000]         BOOTMEM
  #66 [000184d240 - 000186d240]         BOOTMEM
  #67 [000186d240 - 00018ad240]         BOOTMEM
  #68 [000001ab00 - 0000022b00]         BOOTMEM
Memory: 4020284k/5242880k available (3682k kernel code, 1082396k absent, 140200k reserved, 2083k data, 504k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
spurious 8259A interrupt: IRQ7.
Detected 2526.840 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5055.25 BogoMIPS (lpj=8422800)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
ACPI: Core revision 20100702
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz stepping 0a
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (10111.81 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bdee4c10 00265 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00265 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee2810 007A2 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 007A2 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bdee3d90 000FD (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000FD (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee1f90 00047 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00047 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f 
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io  0xe0e0-0xe0ff]
pci 0000:00:1a.1: reg 20: [io  0xe0c0-0xe0df]
pci 0000:00:1a.2: reg 20: [io  0xe0a0-0xe0bf]
pci 0000:00:1a.7: reg 10: [mem 0xd8d04c00-0xd8d04fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xd8d00000-0xd8d03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0xe080-0xe09f]
pci 0000:00:1d.1: reg 20: [io  0xe060-0xe07f]
pci 0000:00:1d.2: reg 20: [io  0xe040-0xe05f]
pci 0000:00:1d.7: reg 10: [mem 0xd8d04800-0xd8d04bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io  0xe130-0xe137]
pci 0000:00:1f.2: reg 14: [io  0xe120-0xe123]
pci 0000:00:1f.2: reg 18: [io  0xe110-0xe117]
pci 0000:00:1f.2: reg 1c: [io  0xe100-0xe103]
pci 0000:00:1f.2: reg 20: [io  0xe020-0xe03f]
pci 0000:00:1f.2: reg 24: [mem 0xd8d04000-0xd8d047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xd8d05000-0xd8d050ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0xe000-0xe01f]
pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io  0xd000-0xd07f]
pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
pci 0000:01:00.1: reg 10: [mem 0xd3080000-0xd3083fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xd7920000-0xd7923fff 64bit]
pci 0000:02:00.0: reg 18: [io  0xc000-0xc0ff]
pci 0000:02:00.0: reg 30: [mem 0xd7900000-0xd791ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.0:   bridge window [mem 0xd7900000-0xd8cfffff]
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xd6500000-0xd6501fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.1:   bridge window [mem 0xd6500000-0xd78fffff]
pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xd5100a00-0xd5100aff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10: [mem 0xd5100900-0xd51009ff]
pci 0000:04:00.1: supports D1 D2
pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.1: PME# disabled
pci 0000:04:00.3: reg 10: [mem 0xd5100000-0xd51007ff]
pci 0000:04:00.3: supports D1 D2
pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.3: PME# disabled
pci 0000:04:00.4: reg 10: [mem 0xd5100800-0xd51008ff]
pci 0000:04:00.4: supports D1 D2
pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.4: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.2:   bridge window [mem 0xd5100000-0xd64fffff]
pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3:   bridge window [io  0x9000-0x9fff]
pci 0000:00:1c.3:   bridge window [mem 0xd3100000-0xd50fffff]
pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 19 1f 
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009bc00 - 000000000009ffff 
reserve RAM buffer: 00000000bdea7000 - 00000000bfffffff 
reserve RAM buffer: 00000000be000000 - 00000000bfffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:05: [io  0x0680-0x069f] has been reserved
system 00:05: [io  0x1000-0x100f] has been reserved
system 00:05: [io  0x0800-0x0803] has been reserved
system 00:05: [io  0x0400-0x047f] has been reserved
system 00:05: [io  0x0500-0x053f] has been reserved
system 00:05: [io  0x164e-0x164f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfeb00000-0xfeb03fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
pci 0000:00:01.0: BAR 15: assigned [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xd9000000-0xd91fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xd9200000-0xd93fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xd9400000-0xd95fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xd9600000-0xd97fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0:   bridge window [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.0:   bridge window [mem 0xd7900000-0xd8cfffff]
pci 0000:00:1c.0:   bridge window [mem 0xd9000000-0xd91fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.1:   bridge window [mem 0xd6500000-0xd78fffff]
pci 0000:00:1c.1:   bridge window [mem 0xd9200000-0xd93fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.2:   bridge window [mem 0xd5100000-0xd64fffff]
pci 0000:00:1c.2:   bridge window [mem 0xd9400000-0xd95fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3:   bridge window [io  0x9000-0x9fff]
pci 0000:00:1c.3:   bridge window [mem 0xd3100000-0xd50fffff]
pci 0000:00:1c.3:   bridge window [mem 0xd9600000-0xd97fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd30fffff]
pci_bus 0000:01: resource 2 [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xd7900000-0xd8cfffff]
pci_bus 0000:02: resource 2 [mem 0xd9000000-0xd91fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xd6500000-0xd78fffff]
pci_bus 0000:03: resource 2 [mem 0xd9200000-0xd93fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd64fffff]
pci_bus 0000:04: resource 2 [mem 0xd9400000-0xd95fffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:05: resource 1 [mem 0xd3100000-0xd50fffff]
pci_bus 0000:05: resource 2 [mem 0xd9600000-0xd97fffff 64bit pref]
pci_bus 0000:0d: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:0d: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:0d: resource 13 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1756k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000
software IO TLB at phys 0x5a00000 - 0x9a00000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1290933629.566:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7855
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
intel_idle: MWAIT substates: 0x3122220
intel_idle: does not run on family 6 model 23
ERST: Table is not found!
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2010-11-28 08:40:30 UTC (1290933630)
Initalizing network drop monitor service
Freeing unused kernel memory: 504k freed
udev[38]: starting version 164
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04180 irq 40
ata3: DUMMY
ata4: DUMMY
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ATAPI: Optiarc BD RW BD-5730S, 1.71, max UDMA/100
ata2.00: configured for UDMA/100
ata1.00: ATA-8: TOSHIBA MK3263GSX, FG020A, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK3263GS FG02 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM            Optiarc  BD RW BD-5730S   1.71 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[924]: starting version 164
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
cfg80211: Calling CRDA to update world regulatory domain
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
sky2: driver version 1.28
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ACPI: resource 0000:00:1f.3 [io  0xe000-0xe01f] conflicts with ACPI region SMI1 [dma 2048-4294903811 64bit disabled]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sky2 0000:02:00.0: irq 41 for MSI/MSI-X
sky2 0000:02:00.0: eth0: addr 00:24:be:85:96:40
sony-laptop: Sony Notebook Control Driver v0.6.
ACPI: WMI: Mapper loaded
input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input1
input: Sony Vaio Jogdial as /devices/virtual/input/input2
firewire_ohci 0000:04:00.3: PCI INT D -> GSI 17 (level, low) -> IRQ 17
firewire_ohci 0000:04:00.3: setting latency timer to 64
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
firewire_ohci 0000:04:00.3: irq 42 for MSI/MSI-X
firewire_ohci: Added fw-ohci device 0000:04:00.3, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd8d04c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8d04800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ACPI: AC Adapter [ADP1] (on-line)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (59 C)
ACPI: Invalid active0 threshold
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (59 C)
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
input: PC Speaker as /devices/platform/pcspkr/input/input3
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
usb 1-2: new high speed USB device using ehci_hcd and address 2
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlagn: Copyright(c) 2003-2010 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
iwlagn 0000:03:00.0: device EEPROM VER=0x11f, CALIB=0x4
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:03:00.0: irq 43 for MSI/MSI-X
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
firewire_core: created device fw0: GUID 080046030321aebd, S400
uhci_hcd: USB Universal Host Controller Interface driver
usb 2-1: new high speed USB device using ehci_hcd and address 2
[Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/LNXVIDEO:00/input/input4
ACPI: Video Device [NGFX] (multi-head: yes  rom: no  post: no)
ACPI: Battery Slot [BAT0] (battery present)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
ACPI: Power Button [PWRB]
hda_codec: ALC262: SKU not ready 0x411111f0
hda_codec: ALC262: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e0e0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e0c0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000e0a0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e080
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e060
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e040
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:01:00.1: setting latency timer to 64
sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e822] (rev 0)
sdhci-pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:04:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:04:00.0: setting latency timer to 64
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
sdhci-pci 0000:04:00.4: SDHCI controller found [1180:e822] (rev 0)
sdhci-pci 0000:04:00.4: PCI INT C -> GSI 16 (level, low) -> IRQ 16
sdhci-pci 0000:04:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:04:00.4: setting latency timer to 64
Registered led device: mmc1::
mmc1: SDHCI controller on PCI [0000:04:00.4] using DMA
phy0: Selected rate control algorithm 'iwl-agn-rs'
[drm] Initialized drm 1.1.0 20060810
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device <unnamed> (05ca:18b5)
input: UVC Camera (05ca:18b5) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 7-1: new full speed USB device using uhci_hcd and address 2
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input10
generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input11
generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 8-1: new full speed USB device using uhci_hcd and address 2
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a5500a2)
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 70.16.27.00
[drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
[drm] nouveau 0000:01:00.0: TMDS table version 2.0
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 010003f3 00010036
[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000000
[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02422362 00020010
[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000
[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[drm] nouveau 0000:01:00.0:   0: 0x00000040: type 0x40 idx 0 tag 0xff
[drm] nouveau 0000:01:00.0:   1: 0x00000100: type 0x00 idx 1 tag 0xff
[drm] nouveau 0000:01:00.0:   2: 0x00001261: type 0x61 idx 2 tag 0x07
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD52B
[drm] nouveau 0000:01:00.0: 0xD84D: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: 0xD851: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: 0xDA0E: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDA3B
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE7C5
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE803
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEA43
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEAA8
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
[drm] nouveau 0000:01:00.0: 0xEAA8: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
scsi 4:0:0:0: Direct-Access     CBM      Flash Disk       5.00 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 978944 512-byte logical blocks: (501 MB/478 MiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
[TTM] Zone  kernel: Available graphics memory: 2011272 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[drm] nouveau 0000:01:00.0: allocated 1366x768 fb: 0x40230000, bo ffff880137169c00
Console: switching to colour frame buffer device 170x48
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: (null)
Adding 2803304k swap on /dev/sda6.  Priority:-1 extents:1 across:2803304k 

lsmod also shows that nouveau is currently loaded and this just after installing arch (no X, no alsa et). Is this ok? I thought I have to install xf86-video-nouveau after xorg install.

EDIT:
Ok, ignore this. It seems nouveau is part of kernel.
http://www.phoronix.com/scan.php?page=n … &px=Nzc5NQ

EDIT2:
Again, tried a fresh install. Blacklisted nouveau after install and tried installing proprietary nvidia driver. Used nvidia-xconfig to generate xorg.conf file which gave me a blank screen and after that I am not able to switch to any terminal also. I had the same problem with nvidia driver on Fedora, but after putting custom edid it worked there. So did the same, but still gives me a blank screen. Also Xorg.0.log Xorg.0.log.old files are empty, Any ideas?

This is the xorg.conf file I am using
xorg.conf

Section "Device"
    Identifier  "Card0"
    Driver      "nvidia"
    VendorName  "nVidia Corporation"
    BoardName   "GT216 [GeForce GT 230M]"
    Option        "ConnectedMonitor" "DFP-0"
    Option        "CustomEDID" "DFP-0:/etc/X11/edid.bin"
    BusID       "PCI:1:0:0"
EndSection

Last edited by sainath (2010-11-28 16:02:51)

Offline

#3 2010-11-28 16:43:34

thestinger
Package Maintainer (PM)
From: Toronto, Canada
Registered: 2010-01-23
Posts: 478

Re: Help!! Kernel panics after installation!!

nouveau is in the kernel, but you still need xf86-video-nouveau for the X driver

can you post your grub config? make sure you have no vga= line, etc in the kernel line

Last edited by thestinger (2010-11-28 16:48:28)

Offline

#4 2010-11-28 17:26:34

sainath
Member
Registered: 2010-11-27
Posts: 4

Re: Help!! Kernel panics after installation!!

No vga= line present in kernel line. This has been a roller-coaster ride but I think I got most of the stuff working this time. I had to downgrade to nvidia-256 drivers to get it working, I built the old packages from AUR.

nvidia-utils-256: http://aur.archlinux.org/packages.php?ID=42038
nvidia-256: http://aur.archlinux.org/packages.php?ID=42037

After this, I tested X and it worked fine. I am posting this from KDE which also seems to be working nicely.

Only problem is the virtual terminals are not working, like if I switch to one of the terminals in F1..F6, I go to a blank screen (its not even blank screen, monitor is clearly switched off) and then after that it is just hard reboot to get back into the system. Also, if I restart computer it doesn't fall back to the terminal to show SIGTERM messages, I have a blank monitor for few secs and then system reboots. So I guess it is clearly functioning except for the display part. Anybody encountered similar issue with Nvidia?

Last edited by sainath (2010-11-28 17:40:06)

Offline

#5 2011-01-29 19:54:47

calyce
Member
From: La Belle Gique
Registered: 2009-04-26
Posts: 10

Re: Help!! Kernel panics after installation!!

I'm having the same problem on my new Sony VAIO VPCF12S1E.
On my fresh installation, each time I try to lauch Gnome (with xinit gnome-session) or GDM, I have a kernel panic or a system freeze. When testing X (startx), everything run as expected.

I have tried to downgrade udev as seen on an other thread but the problem is still the same. Unfortunatelly, I'm not able to find a trace of the panic in the log files.

I took a picture of the last panic I had. Not sure if it helps since it's not always the same message and sometime it's just a freeze.

MOD EDIT -- Please use thmbnails for images. --- Inxsible
I don't know how to make thumbnails so here's the link to the picture


EDIT: I just installed kernel 2.6.37-4 from testing and now Gnome is starting normally. I hope this kernel is stable. I will let you know.

Last edited by calyce (2011-01-29 20:47:16)

Offline

#6 2011-01-29 20:13:19

Inxsible
Forum Fellow
From: Chicago
Registered: 2008-06-09
Posts: 9,183

Re: Help!! Kernel panics after installation!!

calyce,

please follow the forum rules for posting images.


Forum Rules

There's no such thing as a stupid question, but there sure are a lot of inquisitive idiots !

Offline

#7 2011-01-29 20:19:47

calyce
Member
From: La Belle Gique
Registered: 2009-04-26
Posts: 10

Re: Help!! Kernel panics after installation!!

Inxsible wrote:

calyce,

please follow the forum rules for posting images.

Sorry, I'm going to read the rules... Shame on me... wink

Offline

Board footer

Powered by FluxBB