You are not logged in.

#1 2011-04-04 11:48:49

m0g
Member
Registered: 2011-04-04
Posts: 7

GNOME3 unstable - lost touchpad after upgrade

Hello,

I've just installed GNOME3 on my Thinkpad T412 everything is working great except the Touchpad. I think it is no longer recognized.

When I go to System -> mouse & touchpad I can see only mouse menu.

Here is my /etc/X11/xorg.conf.d/10-synaptics.conf :

Section "InputClass"
        Identifier "touchpad catchall"
        Driver "synaptics"
        MatchIsTouchpad "on"
        MatchDevicePath "/dev/input/event*"
        Option "TapButton1" "1"
        Option "TapButton2" "2"
        Option "TapButton3" "3"
        Option "VertTwoFingerScroll" "on"
        Option "HorizTwoFingerScroll" "on"
EndSection

And the command "cat /var/log/Xorg.0.log | grep Synaptics" or "cat /var/log/Xorg.0.log | grep Touchpad" return nothing

Thanks

Offline

#2 2011-04-04 11:52:06

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,937
Website

Re: GNOME3 unstable - lost touchpad after upgrade

from what i saw in the code, is using some libxi method to fetch the devices. if Xorg.0.log doesn't have any synaptics log then something is wrong on your system.

paste pacman -Q xorg-server xf86-input-synaptics

Last edited by wonder (2011-04-04 11:53:05)


Give what you have. To someone, it may be better than you dare to think.

Offline

#3 2011-04-04 11:56:49

m0g
Member
Registered: 2011-04-04
Posts: 7

Re: GNOME3 unstable - lost touchpad after upgrade

Here is pacman -Q xorg-server xf86-input-synaptics

xorg-server 1.10.0.901-1
xf86-input-synaptics 1.4.0-2

Offline

#4 2011-04-04 12:01:20

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,937
Website

Re: GNOME3 unstable - lost touchpad after upgrade

can you paste your /var/log/Xorg.0.log and dmesg somewhere?


Give what you have. To someone, it may be better than you dare to think.

Offline

#5 2011-04-04 13:57:51

m0g
Member
Registered: 2011-04-04
Posts: 7

Re: GNOME3 unstable - lost touchpad after upgrade

dmesg

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 (GCC) ) #1 SMP PREEMPT Wed Mar 30 08:47:36 CEST 2011
Command line: root=/dev/sda6 ro
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
 BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007727c000 (usable)
 BIOS-e820: 000000007727c000 - 0000000077282000 (reserved)
 BIOS-e820: 0000000077282000 - 00000000773e7000 (usable)
 BIOS-e820: 00000000773e7000 - 000000007740f000 (reserved)
 BIOS-e820: 000000007740f000 - 000000007746f000 (usable)
 BIOS-e820: 000000007746f000 - 0000000077470000 (reserved)
 BIOS-e820: 0000000077470000 - 00000000774f1000 (ACPI NVS)
 BIOS-e820: 00000000774f1000 - 000000007770f000 (reserved)
 BIOS-e820: 000000007770f000 - 0000000077717000 (usable)
 BIOS-e820: 0000000077717000 - 000000007771f000 (reserved)
 BIOS-e820: 000000007771f000 - 000000007776f000 (usable)
 BIOS-e820: 000000007776f000 - 000000007779f000 (ACPI NVS)
 BIOS-e820: 000000007779f000 - 00000000777df000 (usable)
 BIOS-e820: 00000000777df000 - 00000000777ff000 (ACPI data)
 BIOS-e820: 00000000777ff000 - 0000000077800000 (usable)
 BIOS-e820: 0000000077800000 - 000000007c000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000f090a000 - 00000000f090b000 (reserved)
 BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
DMI: LENOVO 44034KG/44034KG, BIOS 81ET43WW (1.19 ) 08/21/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x77800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-D3FFF write-protect
  D4000-DBFFF uncachable
  DC000-FFFFF write-through
MTRR variable ranges enabled:
  0 disabled
  1 base 078000000 mask FF8000000 uncachable
  2 base 000000000 mask F80000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000f6370] f6370
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-0000000077800000
 0000000000 - 0077800000 page 2M
kernel direct mapping tables up to 77800000 @ 777dc000-777df000
RAMDISK: 37e3e000 - 37ff0000
ACPI: RSDP 00000000000f6000 00024 (v04 LENOVO)
ACPI: XSDT 00000000777f23c8 00064 (v01 LENOVO TP-81    00001190  LTP 00000000)
ACPI: FACP 00000000777e1000 000F4 (v03 LENOVO TP-81    00001190 PTEC 00000001)
ACPI: DSDT 00000000777e2000 0C7A6 (v02 LENOVO TP-81    00001190 INTL 20050624)
ACPI: FACS 000000007778bfc0 00040
ACPI: HPET 00000000777fed6a 00038 (v01 LENOVO TP-81    00001190 PTEC 00000001)
ACPI: MCFG 00000000777feda2 0003C (v01 LENOVO TP-81    00001190 PTEC 00000001)
ACPI: APIC 00000000777fedde 00084 (v01 LENOVO TP-81    00001190  LTP 00000000)
ACPI: BOOT 00000000777fee62 00028 (v01 LENOVO TP-81    00001190  LTP 00000001)
ACPI: SLIC 00000000777fee8a 00176 (v01 LENOVO TP-81    00001190  LTP 00000000)
ACPI: TCPA 00000000777ef000 00032 (v02    PTL  CRESTLN 06040000      00005A52)
ACPI: SSDT 00000000777e0000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000077800000
Initmem setup node 0 0000000000000000-0000000077800000
  NODE_DATA [0000000077277000 - 000000007727bfff]
 [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880074c00000-ffff8800767fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   empty
Movable zone start PFN for each node
early_node_map[8] active PFN ranges
    0: 0x00000010 -> 0x0000009c
    0: 0x00000100 -> 0x0007727c
    0: 0x00077282 -> 0x000773e7
    0: 0x0007740f -> 0x0007746f
    0: 0x0007770f -> 0x00077717
    0: 0x0007771f -> 0x0007776f
    0: 0x0007779f -> 0x000777df
    0: 0x000777ff -> 0x00077800
On node 0 totalpages: 488550
  DMA zone: 56 pages used for memmap
  DMA zone: 6 pages reserved
  DMA zone: 3918 pages, LIFO batch:0
  DMA32 zone: 6636 pages used for memmap
  DMA32 zone: 477934 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009c000 - 000000000009d000
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000007727c000 - 0000000077282000
PM: Registered nosave memory: 00000000773e7000 - 000000007740f000
PM: Registered nosave memory: 000000007746f000 - 0000000077470000
PM: Registered nosave memory: 0000000077470000 - 00000000774f1000
PM: Registered nosave memory: 00000000774f1000 - 000000007770f000
PM: Registered nosave memory: 0000000077717000 - 000000007771f000
PM: Registered nosave memory: 000000007776f000 - 000000007779f000
PM: Registered nosave memory: 00000000777df000 - 00000000777ff000
Allocating PCI resources starting at 7c000000 (gap: 7c000000:64000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880077000000 s82176 r8192 d24320 u524288
pcpu-alloc: s82176 r8192 d24320 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 481852
Policy zone: DMA32
Kernel command line: root=/dev/sda6 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1915064k/1957888k available (3795k kernel code, 3688k absent, 39136k reserved, 2307k data, 556k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptable hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 19660800 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2393.902 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.29 BogoMIPS (lpj=7979673)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
ACPI: Core revision 20110112
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz stepping 05
Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1
CPU1: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
 #2
CPU2: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
 #3 Ok.
CPU3: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 4 CPUs
Total of 4 processors activated (19159.70 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 000000007771a918 00432 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00432 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 0000000077718018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 0000000077719a98 00303 (v01  PmRef    ApIst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20050624)
ACPI: SSDT 0000000077717d98 00119 (v01  PmRef    ApCst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f 
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x7c000000-0xfeafffff]
pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io  0x1800-0x1807]
pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0xf0904000-0xf090400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xf0906000-0xf09063ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xf0900000-0xf0903fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xf0907000-0xf09073ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io  0x1818-0x181f]
pci 0000:00:1f.2: reg 14: [io  0x180c-0x180f]
pci 0000:00:1f.2: reg 18: [io  0x1810-0x1817]
pci 0000:00:1f.2: reg 1c: [io  0x1808-0x180b]
pci 0000:00:1f.2: reg 20: [io  0x1820-0x183f]
pci 0000:00:1f.2: reg 24: [mem 0xf0908000-0xf09087ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xf0909000-0xf09090ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x1840-0x185f]
pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
pci 0000:00:1f.6: reg 10: [mem 0xf090a000-0xf090afff 64bit]
pci 0000:02:00.0: [197b:2382] type 0 class 0x000880
pci 0000:02:00.0: reg 10: [mem 0xf0500000-0xf05000ff]
pci 0000:02:00.2: [197b:2381] type 0 class 0x000805
pci 0000:02:00.2: reg 10: [mem 0xf0501000-0xf05010ff]
pci 0000:02:00.3: [197b:2383] type 0 class 0x000880
pci 0000:02:00.3: reg 10: [mem 0xf0502000-0xf05020ff]
pci 0000:02:00.4: [197b:2384] type 0 class 0x000880
pci 0000:02:00.4: reg 10: [mem 0xf0503000-0xf05030ff]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: [10ec:8172] type 0 class 0x000280
pci 0000:03:00.0: reg 10: [io  0x2000-0x20ff]
pci 0000:03:00.0: reg 14: [mem 0xf0600000-0xf0603fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.1:   bridge window [mem 0xf0600000-0xf06fffff]
pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:04:00.0: reg 10: [io  0x3000-0x30ff]
pci 0000:04:00.0: reg 18: [mem 0xf0a04000-0xf0a04fff 64bit pref]
pci 0000:04:00.0: reg 20: [mem 0xf0a00000-0xf0a03fff 64bit pref]
pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.2:   bridge window [mem 0xf0a00000-0xf0afffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-07]
pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:1c.3:   bridge window [mem 0xf0c00000-0xf0dfffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 08-08]
pci 0000:00:1c.4:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.5: PCI bridge to [bus 09-09]
pci 0000:00:1c.5:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x7c000000-0xfeafffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 1f 1f 
 pci0000:00: Requesting ACPI _OSC control (0x1d)
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
 pci0000:ff: Requesting ACPI _OSC control (0x1d)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009c400 - 000000000009ffff 
reserve RAM buffer: 000000007727c000 - 0000000077ffffff 
reserve RAM buffer: 00000000773e7000 - 0000000077ffffff 
reserve RAM buffer: 000000007746f000 - 0000000077ffffff 
reserve RAM buffer: 0000000077717000 - 0000000077ffffff 
reserve RAM buffer: 000000007776f000 - 0000000077ffffff 
reserve RAM buffer: 00000000777df000 - 0000000077ffffff 
reserve RAM buffer: 0000000077800000 - 0000000077ffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #3
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #2
pnp 00:00: [bus 00-fe]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0x7c000000-0xfeafffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io  0x0000-0x001f]
pnp 00:01: [io  0x0081-0x0091]
pnp 00:01: [io  0x0093-0x009f]
pnp 00:01: [io  0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xff000000-0xffffffff]
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: [irq 0 disabled]
pnp 00:03: [irq 8]
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io  0x00f0]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io  0x002e-0x002f]
pnp 00:05: [io  0x004e-0x004f]
pnp 00:05: [io  0x0061]
pnp 00:05: [io  0x0063]
pnp 00:05: [io  0x0065]
pnp 00:05: [io  0x0067]
pnp 00:05: [io  0x0070]
pnp 00:05: [io  0x0080]
pnp 00:05: [io  0x0092]
pnp 00:05: [io  0x00b2-0x00b3]
pnp 00:05: [io  0x0680-0x069f]
pnp 00:05: [io  0x0500-0x050f]
pnp 00:05: [io  0x0600-0x0603]
pnp 00:05: [io  0xffff]
pnp 00:05: [io  0x0400-0x047f]
pnp 00:05: [io  0x1180-0x11ff]
pnp 00:05: [io  0x1600-0x16fe]
pnp 00:05: [io  0xfe00]
pnp 00:05: [io  0x0068]
pnp 00:05: [io  0x006c]
pnp 00:05: [io  0x0700-0x070f]
system 00:05: [io  0x0680-0x069f] has been reserved
system 00:05: [io  0x0500-0x050f] has been reserved
system 00:05: [io  0x0600-0x0603] has been reserved
system 00:05: [io  0xffff] has been reserved
system 00:05: [io  0x0400-0x047f] has been reserved
system 00:05: [io  0x1180-0x11ff] has been reserved
system 00:05: [io  0x1600-0x16fe] has been reserved
system 00:05: [io  0xfe00] has been reserved
system 00:05: [io  0x0700-0x070f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io  0x06a0-0x06af]
pnp 00:06: [io  0x06b0-0x06ff]
system 00:06: [io  0x06a0-0x06af] has been reserved
system 00:06: [io  0x06b0-0x06ff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io  0x0070-0x0077]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io  0x0060]
pnp 00:08: [io  0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs LEN0017 PNP0f13 (active)
pnp 00:0a: [mem 0xfed40000-0xfed44fff]
pnp 00:0a: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0b: [mem 0xfed10000-0xfed13fff]
pnp 00:0b: [mem 0xfed18000-0xfed18fff]
pnp 00:0b: [mem 0xfed19000-0xfed19fff]
pnp 00:0b: [mem 0xe0000000-0xefffffff]
pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0b: [mem 0xfeaff000-0xfeafffff]
pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
pnp 00:0b: [mem 0xfed90000-0xfed8ffff disabled]
pnp 00:0b: [mem 0xfed40000-0xfed44fff]
pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
pnp 00:0b: [mem 0xff000000-0xffffffff]
pnp 00:0b: [mem 0xfee00000-0xfeefffff]
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: [mem 0xfeaff000-0xfeafffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [bus ff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: BAR 15: assigned [mem 0x7c000000-0x7c1fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0x7c200000-0x7c3fffff 64bit pref]
pci 0000:00:1c.2: BAR 14: assigned [mem 0x7c400000-0x7c7fffff]
pci 0000:00:1c.4: BAR 14: assigned [mem 0x7c800000-0x7c9fffff]
pci 0000:00:1c.4: BAR 15: assigned [mem 0x7ca00000-0x7cbfffff 64bit pref]
pci 0000:00:1c.5: BAR 14: assigned [mem 0x7cc00000-0x7cdfffff]
pci 0000:00:1c.5: BAR 15: assigned [mem 0x7ce00000-0x7cffffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x5000-0x5fff]
pci 0000:00:1c.4: BAR 13: assigned [io  0x6000-0x6fff]
pci 0000:00:1c.5: BAR 13: assigned [io  0x7000-0x7fff]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:00:1c.0:   bridge window [mem 0x7c000000-0x7c1fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.1:   bridge window [mem 0xf0600000-0xf06fffff]
pci 0000:00:1c.1:   bridge window [mem 0x7c200000-0x7c3fffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xf0a20000-0xf0a3ffff pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.2:   bridge window [mem 0x7c400000-0x7c7fffff]
pci 0000:00:1c.2:   bridge window [mem 0xf0a00000-0xf0afffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-07]
pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:1c.3:   bridge window [mem 0xf0c00000-0xf0dfffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 08-08]
pci 0000:00:1c.4:   bridge window [io  0x6000-0x6fff]
pci 0000:00:1c.4:   bridge window [mem 0x7c800000-0x7c9fffff]
pci 0000:00:1c.4:   bridge window [mem 0x7ca00000-0x7cbfffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 09-09]
pci 0000:00:1c.5:   bridge window [io  0x7000-0x7fff]
pci 0000:00:1c.5:   bridge window [mem 0x7cc00000-0x7cdfffff]
pci 0000:00:1c.5:   bridge window [mem 0x7ce00000-0x7cffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0x7c000000-0xfeafffff]
pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff]
pci_bus 0000:02: resource 2 [mem 0x7c000000-0x7c1fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xf0600000-0xf06fffff]
pci_bus 0000:03: resource 2 [mem 0x7c200000-0x7c3fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0x7c400000-0x7c7fffff]
pci_bus 0000:04: resource 2 [mem 0xf0a00000-0xf0afffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf04fffff]
pci_bus 0000:05: resource 2 [mem 0xf0c00000-0xf0dfffff 64bit pref]
pci_bus 0000:08: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:08: resource 1 [mem 0x7c800000-0x7c9fffff]
pci_bus 0000:08: resource 2 [mem 0x7ca00000-0x7cbfffff 64bit pref]
pci_bus 0000:09: resource 0 [io  0x7000-0x7fff]
pci_bus 0000:09: resource 1 [mem 0x7cc00000-0x7cdfffff]
pci_bus 0000:09: resource 2 [mem 0x7ce00000-0x7cffffff 64bit pref]
pci_bus 0000:0c: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:0c: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0c: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0c: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0c: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:0c: resource 10 [mem 0x7c000000-0xfeafffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1736k freed
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1301931946.596:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 3743
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
ERST: Table is not found!
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2011-04-04 15:45:47 UTC (1301931947)
Initalizing network drop monitor service
Freeing unused kernel memory: 556k freed
udev[46]: starting version 166
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf0908000 port 0xf0908100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xf0908000 port 0xf0908180 irq 40
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf0908000 port 0xf0908300 irq 40
ata6: SATA max UDMA/133 abar m2048@0xf0908000 port 0xf0908380 irq 40
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ATA-8: WDC WD3200BEVT-08A23T1, 02.01A02, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEVT-0 02.0 PQ: 0 ANSI: 5
Refined TSC clocksource calibration: 2394.000 MHz.
Switching to clocksource tsc
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: unexpected _GTF length (8)
ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, LG10, max UDMA/66
ata2.00: unexpected _GTF length (8)
ata2.00: configured for UDMA/66
scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT30N     LG10 PQ: 0 ANSI: 5
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
udev[604]: starting version 166
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ACPI: acpi_idle yielding to intel_idle
iTCO_vendor_support: vendor-support=0
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
rtllib_crypt: registered algorithm 'NULL'
rtllib_crypt: registered algorithm 'TKIP'
rtllib_crypt: registered algorithm 'CCMP'
rtllib_crypt: registered algorithm 'WEP'

Linux kernel driver for RTL8192 based WLAN cards
Copyright (c) 2007-2008, Realsil Wlan Driver
rtl819xSE 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
rtl819xSE 0000:03:00.0: setting latency timer to 64
Memory mapped space start: 0xf0600000 
GetPciBusInfo(): Find Device(10EC:8172)  bus=3 dev=0, func=0
GetPciBridegInfo : Find Device(8086:3B44)  bus=0 dev=28, func=1
Pci Bridge Vendor is found index: 0
Pci Bridge Vendor is 8086
=========>dm_InitRateAdaptiveMask: bUseRAMask=0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (35 C)
input: PC Speaker as /devices/platform/pcspkr/input/input5
intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io  0x1840-0x185f] conflicts with ACPI region SMBI [io 0x1840-0x184f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:04:00.0: setting latency timer to 64
r8169 0000:04:00.0: irq 41 for MSI/MSI-X
r8169 0000:04:00.0: eth0: RTL8168d/8111d at 0xffffc90000360000, 60:eb:69:5c:ff:f8, XID 083000c0 IRQ 41
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Non-volatile memory driver v1.3
jmb38x_ms 0000:02:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
jmb38x_ms 0000:02:00.3: setting latency timer to 64
ACPI: AC Adapter [ACAD] (off-line)
wmi: Mapper loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
[drm] Initialized drm 1.1.0 20060810
sdhci-pci 0000:02:00.0: SDHCI controller found [197b:2382] (rev 0)
sdhci-pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sdhci-pci 0000:02:00.0: setting latency timer to 64
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
sdhci-pci 0000:02:00.2: SDHCI controller found [197b:2381] (rev 0)
sdhci-pci 0000:02:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface.
sdhci-pci 0000:02:00.2: PCI INT A disabled
tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0906000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0907000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery present)
thinkpad_acpi: ThinkPad ACPI Extras v0.24
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 81ET43WW (1.19 ), EC 81HT26WW-1.169000
thinkpad_acpi: Lenovo ThinkPad L412, model 44034KG
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
thinkpad_acpi: asked for hotkey mask 0x078dffff, but firmware forced it to 0x008dffff
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
Registered led device: tpacpi::thinkvantage
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
usb 1-1: new high speed USB device using ehci_hcd and address 2
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
i915 0000:00:02.0: irq 42 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
usb 1-1.3: new full speed USB device using ehci_hcd and address 3
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 1-1.6: new full speed USB device using ehci_hcd and address 4
Console: switching to colour frame buffer device 170x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
acpi device:07: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
usb 2-1.2: new low speed USB device using ehci_hcd and address 3
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
hda_codec: ALC269: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
usb 2-1.4: new high speed USB device using ehci_hcd and address 4
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input11
generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:4810)
input: Integrated Camera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input12
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
EXT4-fs (sda6): re-mounted. Opts: (null)
EXT4-fs (sda6): re-mounted. Opts: (null)
Adding 1052220k swap on /dev/sda5.  Priority:-1 extents:1 across:1052220k 
intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
r8169 0000:04:00.0: eth0: link down
fuse init (API version 7.16)
NET: Registered protocol family 10
ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (sda6): re-mounted. Opts: commit=600
rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
InitializeAdapter8192SE(): Set MRC settings on as default!!
HW_VAR_MRC: Turn on 1T1R MRC!
ADDRCONF(NETDEV_UP): wlan0: link is not ready
rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
InitializeAdapter8192SE(): Set MRC settings on as default!!
HW_VAR_MRC: Turn on 1T1R MRC!
Linking with SFR WiFi Public,channel:11, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
rtllib_associate_procedure_wq(), chan:11
HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
Linking with SFR WiFi Public,channel:11, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
rtllib_associate_procedure_wq(), chan:11
HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
Associated successfully
normal associate
Using G rates:108
Successfully associated, ht not enabled(0, 0)
rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
DHCP pkt src port:68, dest port:67!!
DHCP pkt src port:68, dest port:67!!
dm_check_edca_turbo():iot peer is unknown, bssid:00:17:33:a6:a0:0a
disauth packet !
wlan0: no IPv6 routers present
rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
InitializeAdapter8192SE(): Set MRC settings on as default!!
HW_VAR_MRC: Turn on 1T1R MRC!
Linking with SFR WiFi Public,channel:11, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
rtllib_associate_procedure_wq(), chan:11
HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
Linking with SFR WiFi Public,channel:11, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
rtllib_associate_procedure_wq(), chan:11
HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
Associated successfully
normal associate
Using G rates:108
Successfully associated, ht not enabled(0, 0)
rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
DHCP pkt src port:68, dest port:67!!
DHCP pkt src port:68, dest port:67!!
LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
DHCP pkt src port:68, dest port:67!!
DHCP pkt src port:68, dest port:67!!
DHCP pkt src port:68, dest port:67!!
chromium-sandbo (1945): /proc/1943/oom_adj is deprecated, please use /proc/1943/oom_score_adj instead.
rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData

Xorg.log

[    16.926] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[    16.927] 
X.Org X Server 1.10.0.901 (1.10.1 RC 1)
Release Date: 2011-03-29
[    16.927] X Protocol Version 11, Revision 0
[    16.927] Build Operating System: Linux 2.6.37-ARCH x86_64 
[    16.927] Current Operating System: Linux murdoch 2.6.38-ARCH #1 SMP PREEMPT Wed Mar 30 08:47:36 CEST 2011 x86_64
[    16.927] Kernel command line: root=/dev/sda6 ro
[    16.927] Build Date: 29 March 2011  09:11:14AM
[    16.927]  
[    16.927] Current version of pixman: 0.20.2
[    16.927]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    16.927] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    16.927] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr  4 15:46:03 2011
[    16.996] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    17.074] (==) No Layout section.  Using the first Screen section.
[    17.075] (**) |-->Screen "Sreen0" (0)
[    17.075] (**) |   |-->Monitor "Monitor0"
[    17.075] (**) |   |-->Device "Device0"
[    17.075] (==) Automatically adding devices
[    17.075] (==) Automatically enabling devices
[    17.251] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
[    17.251] (==) ModulePath set to "/usr/lib/xorg/modules"
[    17.251] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    17.251] (II) Loader magic: 0x7d1e00
[    17.251] (II) Module ABI versions:
[    17.251]     X.Org ANSI C Emulation: 0.4
[    17.251]     X.Org Video Driver: 10.0
[    17.251]     X.Org XInput driver : 12.2
[    17.251]     X.Org Server Extension : 5.0
[    17.253] (--) PCI:*(0:0:2:0) 8086:0046:17aa:215a rev 2, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[    17.253] (II) Open ACPI successful (/var/run/acpid.socket)
[    17.253] (II) LoadModule: "extmod"
[    17.272] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    17.290] (II) Module extmod: vendor="X.Org Foundation"
[    17.290]     compiled for 1.10.0.901, module version = 1.0.0
[    17.290]     Module class: X.Org Server Extension
[    17.290]     ABI class: X.Org Server Extension, version 5.0
[    17.290] (II) Loading extension MIT-SCREEN-SAVER
[    17.290] (II) Loading extension XFree86-VidModeExtension
[    17.290] (II) Loading extension XFree86-DGA
[    17.290] (II) Loading extension DPMS
[    17.290] (II) Loading extension XVideo
[    17.290] (II) Loading extension XVideo-MotionCompensation
[    17.290] (II) Loading extension X-Resource
[    17.290] (II) LoadModule: "dbe"
[    17.290] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    17.303] (II) Module dbe: vendor="X.Org Foundation"
[    17.303]     compiled for 1.10.0.901, module version = 1.0.0
[    17.303]     Module class: X.Org Server Extension
[    17.303]     ABI class: X.Org Server Extension, version 5.0
[    17.303] (II) Loading extension DOUBLE-BUFFER
[    17.303] (II) LoadModule: "glx"
[    17.304] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    17.326] (II) Module glx: vendor="X.Org Foundation"
[    17.326]     compiled for 1.10.0.901, module version = 1.0.0
[    17.326]     ABI class: X.Org Server Extension, version 5.0
[    17.326] (==) AIGLX enabled
[    17.326] (II) Loading extension GLX
[    17.327] (II) LoadModule: "record"
[    17.327] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    17.327] (II) Module record: vendor="X.Org Foundation"
[    17.328]     compiled for 1.10.0.901, module version = 1.13.0
[    17.328]     Module class: X.Org Server Extension
[    17.328]     ABI class: X.Org Server Extension, version 5.0
[    17.328] (II) Loading extension RECORD
[    17.328] (II) LoadModule: "dri"
[    17.328] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    17.362] (II) Module dri: vendor="X.Org Foundation"
[    17.362]     compiled for 1.10.0.901, module version = 1.0.0
[    17.362]     ABI class: X.Org Server Extension, version 5.0
[    17.362] (II) Loading extension XFree86-DRI
[    17.362] (II) LoadModule: "dri2"
[    17.362] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    17.363] (II) Module dri2: vendor="X.Org Foundation"
[    17.363]     compiled for 1.10.0.901, module version = 1.2.0
[    17.363]     ABI class: X.Org Server Extension, version 5.0
[    17.363] (II) Loading extension DRI2
[    17.363] (II) LoadModule: "intel"
[    17.381] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    17.413] (II) Module intel: vendor="X.Org Foundation"
[    17.413]     compiled for 1.10.0.901, module version = 2.14.902
[    17.413]     Module class: X.Org Video Driver
[    17.414]     ABI class: X.Org Video Driver, version 10.0
[    17.414] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
    Sandybridge, Sandybridge
[    17.414] (++) using VT number 7

[    17.419] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    17.419] drmOpenDevice: node name is /dev/dri/card0
[    17.419] drmOpenDevice: open result is 9, (OK)
[    17.419] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    17.419] drmOpenDevice: node name is /dev/dri/card0
[    17.419] drmOpenDevice: open result is 9, (OK)
[    17.419] drmOpenByBusid: drmOpenMinor returns 9
[    17.419] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    17.420] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[    17.420] (==) intel(0): RGB weight 888
[    17.420] (==) intel(0): Default visual is TrueColor
[    17.420] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[    17.420] (--) intel(0): Chipset: "Arrandale"
[    17.420] (**) intel(0): Framebuffer tiled
[    17.420] (**) intel(0): Pixmaps tiled
[    17.420] (**) intel(0): 3D buffers tiled
[    17.420] (**) intel(0): SwapBuffers wait enabled
[    17.420] (==) intel(0): video overlay key set to 0x101fe
[    17.428] (II) intel(0): Output LVDS1 using monitor section Monitor0
[    17.428] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    17.428] (II) intel(0): Output VGA1 has no monitor section
[    17.433] (II) intel(0): Output HDMI1 has no monitor section
[    17.434] (II) intel(0): Output DP1 has no monitor section
[    17.439] (II) intel(0): Output HDMI2 has no monitor section
[    17.444] (II) intel(0): Output HDMI3 has no monitor section
[    17.445] (II) intel(0): Output DP2 has no monitor section
[    17.446] (II) intel(0): Output DP3 has no monitor section
[    17.446] (II) intel(0): EDID for output LVDS1
[    17.446] (II) intel(0): Manufacturer: LEN  Model: 40a0  Serial#: 0
[    17.446] (II) intel(0): Year: 2009  Week: 1
[    17.446] (II) intel(0): EDID Version: 1.3
[    17.446] (II) intel(0): Digital Display Input
[    17.446] (II) intel(0): Max Image Size [cm]: horiz.: 31  vert.: 17
[    17.446] (II) intel(0): Gamma: 2.20
[    17.446] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[    17.446] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    17.446] (II) intel(0): First detailed timing is preferred mode
[    17.446] (II) intel(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[    17.446] (II) intel(0): blueX: 0.150 blueY: 0.600   whiteX: 0.313 whiteY: 0.329
[    17.446] (II) intel(0): Manufacturer's mask: 0
[    17.447] (II) intel(0): Supported detailed timing:
[    17.447] (II) intel(0): clock: 69.0 MHz   Image Size:  309 x 173 mm
[    17.447] (II) intel(0): h_active: 1366  h_sync: 1404  h_sync_end 1426 h_blank_end 1436 h_border: 0
[    17.447] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 801 v_border: 0
[    17.447] (II) intel(0): Supported detailed timing:
[    17.447] (II) intel(0): clock: 57.5 MHz   Image Size:  309 x 173 mm
[    17.447] (II) intel(0): h_active: 1366  h_sync: 1404  h_sync_end 1426 h_blank_end 1436 h_border: 0
[    17.447] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 801 v_border: 0
[    17.447] (II) intel(0): Unknown vendor-specific block f
[    17.447] (II) intel(0):  B140XW01 V7
[    17.447] (II) intel(0): EDID (in hex):
[    17.447] (II) intel(0):     00ffffffffffff0030aea04000000000
[    17.447] (II) intel(0):     01130103801f1178eac8a59e57549226
[    17.447] (II) intel(0):     99505400000001010101010101010101
[    17.447] (II) intel(0):     010101010101f91a5646500021302616
[    17.447] (II) intel(0):     360035ad100000187a16564650002130
[    17.447] (II) intel(0):     2616360035ad100000180000000f008c
[    17.447] (II) intel(0):     09328c092816090006af5637000000fe
[    17.447] (II) intel(0):     004231343058573031205637200a009e
[    17.447] (II) intel(0): EDID vendor "LEN", prod id 16544
[    17.447] (II) intel(0): Printing DDC gathered Modelines:
[    17.447] (II) intel(0): Modeline "1366x768"x0.0   69.05  1366 1404 1426 1436  768 771 777 801 -hsync -vsync (48.1 kHz)
[    17.447] (II) intel(0): Modeline "1366x768"x0.0   57.54  1366 1404 1426 1436  768 771 777 801 -hsync -vsync (40.1 kHz)
[    17.447] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    17.447] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    17.447] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    17.447] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    17.447] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    17.447] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    17.448] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    17.448] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    17.448] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    17.448] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    17.448] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    17.448] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    17.448] (II) intel(0): Printing probed modes for output LVDS1
[    17.448] (II) intel(0): Modeline "1366x768"x60.0   69.05  1366 1404 1426 1436  768 771 777 801 -hsync -vsync (48.1 kHz)
[    17.448] (II) intel(0): Modeline "1366x768"x50.0   57.54  1366 1404 1426 1436  768 771 777 801 -hsync -vsync (40.1 kHz)
[    17.448] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    17.448] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    17.448] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    17.448] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    17.448] (II) intel(0): EDID for output VGA1
[    17.453] (II) intel(0): EDID for output HDMI1
[    17.454] (II) intel(0): EDID for output DP1
[    17.459] (II) intel(0): EDID for output HDMI2
[    17.463] (II) intel(0): EDID for output HDMI3
[    17.464] (II) intel(0): EDID for output DP2
[    17.465] (II) intel(0): EDID for output DP3
[    17.465] (II) intel(0): Output LVDS1 connected
[    17.465] (II) intel(0): Output VGA1 disconnected
[    17.466] (II) intel(0): Output HDMI1 disconnected
[    17.466] (II) intel(0): Output DP1 disconnected
[    17.466] (II) intel(0): Output HDMI2 disconnected
[    17.466] (II) intel(0): Output HDMI3 disconnected
[    17.466] (II) intel(0): Output DP2 disconnected
[    17.466] (II) intel(0): Output DP3 disconnected
[    17.466] (II) intel(0): Using exact sizes for initial modes
[    17.466] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    17.466] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    17.466] (II) intel(0): Kernel page flipping support detected, enabling
[    17.466] (**) intel(0): Display dimensions: (310, 170) mm
[    17.466] (**) intel(0): DPI set to (111, 114)
[    17.466] (II) Loading sub module "fb"
[    17.466] (II) LoadModule: "fb"
[    17.466] (II) Loading /usr/lib/xorg/modules/libfb.so
[    17.482] (II) Module fb: vendor="X.Org Foundation"
[    17.482]     compiled for 1.10.0.901, module version = 1.0.0
[    17.482]     ABI class: X.Org ANSI C Emulation, version 0.4
[    17.482] (II) Loading sub module "dri2"
[    17.482] (II) LoadModule: "dri2"
[    17.482] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    17.482] (II) Module dri2: vendor="X.Org Foundation"
[    17.482]     compiled for 1.10.0.901, module version = 1.2.0
[    17.482]     ABI class: X.Org Server Extension, version 5.0
[    17.482] (==) Depth 24 pixmap format is 32 bpp
[    17.482] (II) intel(0): [DRI2] Setup complete
[    17.482] (II) intel(0): [DRI2]   DRI driver: i965
[    17.482] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    17.521] (II) UXA(0): Driver registered support for the following operations:
[    17.521] (II)         solid
[    17.521] (II)         copy
[    17.521] (II)         composite (RENDER acceleration)
[    17.521] (II)         put_image
[    17.521] (II)         get_image
[    17.521] (==) intel(0): Backing store disabled
[    17.521] (==) intel(0): Silken mouse enabled
[    17.522] (II) intel(0): Initializing HW Cursor
[    17.586] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    17.589] (==) intel(0): DPMS enabled
[    17.589] (==) intel(0): Intel XvMC decoder enabled
[    17.589] (II) intel(0): Set up textured video
[    17.589] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    17.590] (II) intel(0): direct rendering: DRI2 Enabled
[    17.590] (==) intel(0): hotplug detection: "enabled"
[    17.590] (--) RandR disabled
[    17.590] (II) Initializing built-in extension Generic Event Extension
[    17.590] (II) Initializing built-in extension SHAPE
[    17.590] (II) Initializing built-in extension MIT-SHM
[    17.590] (II) Initializing built-in extension XInputExtension
[    17.590] (II) Initializing built-in extension XTEST
[    17.590] (II) Initializing built-in extension BIG-REQUESTS
[    17.590] (II) Initializing built-in extension SYNC
[    17.590] (II) Initializing built-in extension XKEYBOARD
[    17.590] (II) Initializing built-in extension XC-MISC
[    17.590] (II) Initializing built-in extension SECURITY
[    17.590] (II) Initializing built-in extension XINERAMA
[    17.590] (II) Initializing built-in extension XFIXES
[    17.590] (II) Initializing built-in extension RENDER
[    17.590] (II) Initializing built-in extension RANDR
[    17.590] (II) Initializing built-in extension COMPOSITE
[    17.590] (II) Initializing built-in extension DAMAGE
[    17.833] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    17.833] (II) AIGLX: enabled GLX_INTEL_swap_event
[    17.833] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    17.833] (II) AIGLX: enabled GLX_SGI_make_current_read
[    17.833] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    17.834] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[    17.834] (II) GLX: Initialized DRI2 GL provider for screen 0
[    17.834] (II) intel(0): Setting screen physical size to 361 x 203
[    18.430] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    18.430] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.430] (II) LoadModule: "evdev"
[    18.474] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.484] (II) Module evdev: vendor="X.Org Foundation"
[    18.484]     compiled for 1.10.0, module version = 2.6.0
[    18.484]     Module class: X.Org XInput Driver
[    18.484]     ABI class: X.Org XInput driver, version 12.2
[    18.484] (II) Using input driver 'evdev' for 'Power Button'
[    18.484] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.484] (**) Power Button: always reports core events
[    18.484] (**) Power Button: Device: "/dev/input/event4"
[    18.520] (--) Power Button: Found keys
[    18.520] (II) Power Button: Configuring as keyboard
[    18.520] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    18.520] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    18.520] (**) Option "xkb_rules" "evdev"
[    18.520] (**) Option "xkb_model" "evdev"
[    18.520] (**) Option "xkb_layout" "fr"
[    18.520] (**) Option "xkb_options" "terminate:ctrl_alt_backspace"
[    18.689] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    18.689] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    18.689] (II) Using input driver 'evdev' for 'Video Bus'
[    18.689] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.689] (**) Video Bus: always reports core events
[    18.689] (**) Video Bus: Device: "/dev/input/event7"
[    18.703] (--) Video Bus: Found keys
[    18.703] (II) Video Bus: Configuring as keyboard
[    18.703] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7/event7"
[    18.703] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    18.703] (**) Option "xkb_rules" "evdev"
[    18.703] (**) Option "xkb_model" "evdev"
[    18.703] (**) Option "xkb_layout" "fr"
[    18.703] (**) Option "xkb_options" "terminate:ctrl_alt_backspace"
[    18.718] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    18.718] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.718] (II) Using input driver 'evdev' for 'Power Button'
[    18.718] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.718] (**) Power Button: always reports core events
[    18.718] (**) Power Button: Device: "/dev/input/event2"
[    18.733] (--) Power Button: Found keys
[    18.733] (II) Power Button: Configuring as keyboard
[    18.733] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[    18.733] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    18.733] (**) Option "xkb_rules" "evdev"
[    18.733] (**) Option "xkb_model" "evdev"
[    18.733] (**) Option "xkb_layout" "fr"
[    18.733] (**) Option "xkb_options" "terminate:ctrl_alt_backspace"
[    18.734] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    18.734] (II) No input driver/identifier specified (ignoring)
[    18.735] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    18.735] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    18.735] (II) Using input driver 'evdev' for 'Sleep Button'
[    18.735] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.735] (**) Sleep Button: always reports core events
[    18.735] (**) Sleep Button: Device: "/dev/input/event3"
[    18.760] (--) Sleep Button: Found keys
[    18.760] (II) Sleep Button: Configuring as keyboard
[    18.760] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[    18.760] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[    18.760] (**) Option "xkb_rules" "evdev"
[    18.760] (**) Option "xkb_model" "evdev"
[    18.760] (**) Option "xkb_layout" "fr"
[    18.760] (**) Option "xkb_options" "terminate:ctrl_alt_backspace"
[    18.765] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[    18.765] (II) No input driver/identifier specified (ignoring)
[    18.767] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[    18.767] (II) No input driver/identifier specified (ignoring)
[    18.767] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[    18.767] (II) No input driver/identifier specified (ignoring)
[    18.772] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/event11)
[    18.772] (**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[    18.772] (II) Using input driver 'evdev' for 'PIXART USB OPTICAL MOUSE'
[    18.772] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.772] (**) PIXART USB OPTICAL MOUSE: always reports core events
[    18.772] (**) PIXART USB OPTICAL MOUSE: Device: "/dev/input/event11"
[    18.786] (--) PIXART USB OPTICAL MOUSE: Found 3 mouse buttons
[    18.786] (--) PIXART USB OPTICAL MOUSE: Found scroll wheel(s)
[    18.786] (--) PIXART USB OPTICAL MOUSE: Found relative axes
[    18.786] (--) PIXART USB OPTICAL MOUSE: Found x and y relative axes
[    18.786] (II) PIXART USB OPTICAL MOUSE: Configuring as mouse
[    18.786] (II) PIXART USB OPTICAL MOUSE: Adding scrollwheel support
[    18.786] (**) PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[    18.786] (**) PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    18.787] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input11/event11"
[    18.787] (II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE)
[    18.787] (II) PIXART USB OPTICAL MOUSE: initialized for relative axes.
[    18.787] (**) PIXART USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[    18.787] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration profile 0
[    18.787] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[    18.787] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[    18.787] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/mouse0)
[    18.787] (II) No input driver/identifier specified (ignoring)
[    18.788] (II) config/udev: Adding input device Integrated Camera (/dev/input/event12)
[    18.788] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[    18.788] (II) Using input driver 'evdev' for 'Integrated Camera'
[    18.788] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.788] (**) Integrated Camera: always reports core events
[    18.788] (**) Integrated Camera: Device: "/dev/input/event12"
[    18.813] (--) Integrated Camera: Found keys
[    18.813] (II) Integrated Camera: Configuring as keyboard
[    18.813] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input12/event12"
[    18.813] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD)
[    18.813] (**) Option "xkb_rules" "evdev"
[    18.813] (**) Option "xkb_model" "evdev"
[    18.813] (**) Option "xkb_layout" "fr"
[    18.813] (**) Option "xkb_options" "terminate:ctrl_alt_backspace"
[    18.822] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    18.822] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    18.822] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    18.822] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.822] (**) AT Translated Set 2 keyboard: always reports core events
[    18.822] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    18.840] (--) AT Translated Set 2 keyboard: Found keys
[    18.840] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    18.840] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    18.840] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    18.840] (**) Option "xkb_rules" "evdev"
[    18.840] (**) Option "xkb_model" "evdev"
[    18.840] (**) Option "xkb_layout" "fr"
[    18.840] (**) Option "xkb_options" "terminate:ctrl_alt_backspace"
[    18.841] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    18.841] (II) No input driver/identifier specified (ignoring)
[    18.842] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
[    18.842] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[    18.842] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[    18.843] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.843] (**) ThinkPad Extra Buttons: always reports core events
[    18.843] (**) ThinkPad Extra Buttons: Device: "/dev/input/event6"
[    18.866] (--) ThinkPad Extra Buttons: Found keys
[    18.866] (II) ThinkPad Extra Buttons: Configuring as keyboard
[    18.866] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input6/event6"
[    18.866] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
[    18.866] (**) Option "xkb_rules" "evdev"
[    18.866] (**) Option "xkb_model" "evdev"
[    18.866] (**) Option "xkb_layout" "fr"
[    18.866] (**) Option "xkb_options" "terminate:ctrl_alt_backspace"
[    18.911] (II) intel(0): EDID vendor "LEN", prod id 16544
[    18.911] (II) intel(0): Printing DDC gathered Modelines:
[    18.911] (II) intel(0): Modeline "1366x768"x0.0   69.05  1366 1404 1426 1436  768 771 777 801 -hsync -vsync (48.1 kHz)
[    18.911] (II) intel(0): Modeline "1366x768"x0.0   57.54  1366 1404 1426 1436  768 771 777 801 -hsync -vsync (40.1 kHz)
[    26.271] (II) intel(0): EDID vendor "LEN", prod id 16544
[    26.271] (II) intel(0): Printing DDC gathered Modelines:
[    26.271] (II) intel(0): Modeline "1366x768"x0.0   69.05  1366 1404 1426 1436  768 771 777 801 -hsync -vsync (48.1 kHz)
[    26.271] (II) intel(0): Modeline "1366x768"x0.0   57.54  1366 1404 1426 1436  768 771 777 801 -hsync -vsync (40.1 kHz)
[    26.290] (II) intel(0): EDID vendor "LEN", prod id 16544
[    26.290] (II) intel(0): Printing DDC gathered Modelines:
[    26.290] (II) intel(0): Modeline "1366x768"x0.0   69.05  1366 1404 1426 1436  768 771 777 801 -hsync -vsync (48.1 kHz)
[    26.290] (II) intel(0): Modeline "1366x768"x0.0   57.54  1366 1404 1426 1436  768 771 777 801 -hsync -vsync (40.1 kHz)
[    26.322] (II) intel(0): EDID vendor "LEN", prod id 16544
[    26.322] (II) intel(0): Printing DDC gathered Modelines:
[    26.322] (II) intel(0): Modeline "1366x768"x0.0   69.05  1366 1404 1426 1436  768 771 777 801 -hsync -vsync (48.1 kHz)
[    26.322] (II) intel(0): Modeline "1366x768"x0.0   57.54  1366 1404 1426 1436  768 771 777 801 -hsync -vsync (40.1 kHz)
[    26.368] (II) intel(0): EDID vendor "LEN", prod id 16544
[    26.368] (II) intel(0): Printing DDC gathered Modelines:
[    26.368] (II) intel(0): Modeline "1366x768"x0.0   69.05  1366 1404 1426 1436  768 771 777 801 -hsync -vsync (48.1 kHz)
[    26.368] (II) intel(0): Modeline "1366x768"x0.0   57.54  1366 1404 1426 1436  768 771 777 801 -hsync -vsync (40.1 kHz)
[    30.387] (II) intel(0): EDID vendor "LEN", prod id 16544
[    30.387] (II) intel(0): Printing DDC gathered Modelines:
[    30.387] (II) intel(0): Modeline "1366x768"x0.0   69.05  1366 1404 1426 1436  768 771 777 801 -hsync -vsync (48.1 kHz)
[    30.387] (II) intel(0): Modeline "1366x768"x0.0   57.54  1366 1404 1426 1436  768 771 777 801 -hsync -vsync (40.1 kHz)

Offline

#6 2011-04-04 14:20:27

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,937
Website

Re: GNOME3 unstable - lost touchpad after upgrade

from what i see the kernel doesn't detect your touchpad at all.

try to downgrade to kernel from core and do a dmesg | grep -i input with 2.6.37 and with 2.6.38 and compare them and them fill a bug against kernel26


Give what you have. To someone, it may be better than you dare to think.

Offline

#7 2011-04-04 15:48:32

Edward.H
Member
Registered: 2009-10-26
Posts: 69
Website

Re: GNOME3 unstable - lost touchpad after upgrade

I got this problem too after updating,I think it will be solved on next update,so I am just waiting ...

Offline

#8 2011-04-04 16:15:38

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,937
Website

Re: GNOME3 unstable - lost touchpad after upgrade

@Edward.H fixed in the next version of what? g-c-c gets the devices from xorg...


Give what you have. To someone, it may be better than you dare to think.

Offline

#9 2011-04-04 17:54:47

m0g
Member
Registered: 2011-04-04
Posts: 7

Re: GNOME3 unstable - lost touchpad after upgrade

So, I've tried to downgrade to kernel 2.6.37.4 and I still not have touchpad working.

Here the result of dmesg | grep -i input :

input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
input: PC Speaker as /devices/platform/pcspkr/input/input5
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input10
generic-usb 0003:046D:C061.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.0-1.2/input0
input: Integrated Camera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input11
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input12
generic-usb 0003:046D:C061.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1a.0-1.2/input0

Thanks for your help.

Last edited by m0g (2011-04-04 21:09:50)

Offline

#10 2011-04-05 20:41:05

m0g
Member
Registered: 2011-04-04
Posts: 7

Re: GNOME3 unstable - lost touchpad after upgrade

So, now I understand nothing.
When I reboot on windows my trouchpad & trackpad doesn't work. I've tried fn+f8 nothing happen. I've look into the BIOS and there is nothing about Touchpad. And I've to launch an Ubuntu live cd and touchpad still doesn't work. Maybe there is a secret keystroke for reactive, but I don't find it.

Offline

#11 2011-04-06 08:27:17

neutrix
Member
From: Bristol, UK
Registered: 2009-08-29
Posts: 63
Website

Re: GNOME3 unstable - lost touchpad after upgrade

Check your BIOS? If it doesn't work in any OS then it is either switched off or the hardware has given up. As you've already said that you've tried turning it on using the keyboard fn key, the only thing I can think of is BIOS other than hardware failure.

That'll teach me not to read. I'd probably guess hardware failure then if there isn't a setting in the BIOS and the fn keys don't work.

Last edited by neutrix (2011-04-06 08:28:42)

Offline

Board footer

Powered by FluxBB