You are not logged in.
Pages: 1
I recently picked up an Intellinet 150N USB wireless adapter. It has the rt3070 chipset. It works fine in Windows, but when I try to use it in Arch, I have some issues. I have blacklisted all the rt* modules I had read to, and I was able to assign an ESSID and key to wlan0. However, when I run dhcpcd, it times out. I have a feeling I'm missing something silly, but I can't figure it out. Anyone have any suggestions? Thanks in advance.
david
slackcub@gmail.com
Offline
I'm having the same issue here, with same chipset. Did you get to something with it?
Offline
I have rt2870 adapter. Probably it wiil be the same for rt3070. Starting with 2.6.38 I have switch from (self-compiled) rt2870sta module to default rt-modules (blacklisting staging rt2870sta driver):
$ sudo lsmod | grep rt2
rt2800usb 10933 0
rt2800lib 30637 1 rt2800usb
crc_ccitt 1355 1 rt2800lib
rt2x00usb 8155 1 rt2800usb
rt2x00lib 29848 3 rt2800usb,rt2800lib,rt2x00usb
mac80211 203397 3 rt2800lib,rt2x00usb,rt2x00lib
cfg80211 142631 2 rt2x00lib,mac80211
usbcore 134996 6 rt2800usb,rt2x00usb,usbhid,uhci_hcd,ehci_hcd
For me they do work at N mode now.
Last edited by student975 (2011-04-13 08:20:37)
"I exist" is the best myth I know..
Offline
[chariabidis@rorschach ~]$ lsmod | grep rt2
ext2 62258 1
btusb 11153 0
bluetooth 55705 1 btusb
rt2800usb 10901 0
rt2800lib 30733 1 rt2800usb
crc_ccitt 1355 1 rt2800lib
rt2x00usb 8251 1 rt2800usb
rt2x00lib 30008 3 rt2800usb,rt2800lib,rt2x00usb
uvcvideo 60799 0
videodev 65175 1 uvcvideo
v4l2_compat_ioctl32 6716 1 videodev
--
thermal 7631 0
video 10996 0
sp5100_tco 4264 0
usbcore 134891 7 btusb,rt2800usb,rt2x00usb,uvcvideo,ohci_hcd,ehci_hcd
shpchp 25537 0
pci_hotplug 24640 1 shpchp
psmouse 52944 0
brcm80211 684778 0
mac80211 208200 4 rt2800lib,rt2x00usb,rt2x00lib,brcm80211
cfg80211 144199 3 rt2x00lib,brcm80211,mac80211
rfkill 14810 3 bluetooth,hp_wmi,cfg80211
wmi 8083 1 hp_wmi
snd_hda_intel 21738 0
The same modules. Yet, I'm unable to obtain an IP with this chipset. I've tried switching from dhcpc to dhclient, but it's the same history.
I'll try to debug this and bring it here.-
Offline
i downloaded the latest driver 2.5.0.2, add MODE = STA and TARGET = LINUX in Makefile. add MODULE_LICENSE("GPL") in os/linux/usb_main_dev.c
sed -i /"tftpboot"/d Makefile
make
make install
remove the rt2870sta from /lib/modules/....../drivers/staging/rt2870/rt2870sta....
blacklist all rt2xxxxx related modules
it is now working ok.
Offline
i downloaded the latest driver 2.5.0.2, add MODE = STA and TARGET = LINUX in Makefile. add MODULE_LICENSE("GPL") in os/linux/usb_main_dev.c
sed -i /"tftpboot"/d Makefile
make
make installremove the rt2870sta from /lib/modules/....../drivers/staging/rt2870/rt2870sta....
blacklist all rt2xxxxx related modules
it is now working ok.
I'm trying to get my RT3070 chip to work aswell, But when i try to extract the drivers (v 2.5.0.2) all i end upp with is one big file. How did you extract the files?
EDIT:
bunzip2 didn't extract this right. Used the following line to extract.
tar -xvaf 2011_0407_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO.bz2
Last edited by melw (2011-10-10 21:01:58)
I know I'm paranoid, but am I paranoid enought....
Offline
Pages: 1