You are not logged in.

#1 2011-05-16 16:52:38

tpowa
Developer
From: Lauingen , Germany
Registered: 2004-04-05
Posts: 2,322

2011.05-2 archboot "2k11-R2" ISO hybrid image released

Hi Arch community,

Arch Linux (archboot creation tool) 2011.05-2, "2k11-R2" has been released.
To avoid confusion, this is not an official arch linux iso release!

Homepage and for more information on archboot:
http://wiki.archlinux.org/index.php/Archboot

Summary:
- bump to latest kernels and introduce pacman 3.5.2

Hybrid image file and torrent is provided, which include
i686 and x86_64 core repository. Please check md5sum before using it.

Hybrid image file is a standard CD-burnable image and also a raw disk image.
    - Can be burned to CD(RW) media using most CD-burning utilities.
    - Can be raw-written to a drive using 'dd' or similar utilities.
      This method is intended for use with USB thumb drives.

Please get it from your favorite arch linux mirror:
https://downloads.archlinux.de/iso/archboot/2011.05/
<yourmirror>/iso/archboot/2011.05/

/boot for PXE/Rescue files are provided here:
https://downloads.archlinux.de/iso/arch … 11.05/boot
<yourmirror>/iso/archboot/2011.05/boot

Changelog:

GENERAL:
- kernel 2.6.38.6 / LTS kernel 2.6.32.40
- pacman 3.5.2 usage
- RAM recommendations: 320 MB

Kernel changes:
- bump to latest .38 series and bump lts to latest .32 series

Removed features:
- clamav removed

Environment changes:
- merged in latest initscripts and mkinitcpio changes
- updated pacman mirrorlist
- added cifs-utils, eject and file to environment
- switched to krb5 and dropped heimdal

setup changes:
- allow btrfs for grub2

hwdetect changes:
- none

quickinst changes:
- none

KNOWN ISSUES:
- FTP installation mode:
  None
- CD installation mode:
  None
 
Further documentation can be found on-disk and on the wiki.
Have fun!

greetings
tpowa

Last edited by tpowa (2011-05-17 05:23:58)

Offline

#2 2011-05-16 18:31:54

creyes123
Member
From: Albuquerque, NM, USA
Registered: 2011-05-14
Posts: 2
Website

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

Thank you for updating archboot. Unfortunately, I cannot get LUKS encryption to work with this new release.

Using the GUI installer (GPT, ext4), the error that comes back says "Passphrases didn't match". If I run cryptsetup in the command line, I get:

#cryptsetup luksFormat /dev/sda2
device-mapper: table 254.0: crypt: unknown target type
device-mapper: reload ioctrl failed: Invalid argument
Failed to setup dm-crypt key mapping for device /dev/sda2.
Check that kernel supports aes-cbc-essiv:sha256 cypher (check syslog for more info).

Using "aes-xts-plain" gives the same error. I tried manually loading the crypto modules, but that got me nowhere.

Offline

#3 2011-05-16 20:02:29

tpowa
Developer
From: Lauingen , Germany
Registered: 2004-04-05
Posts: 2,322

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

Just a guess, it could be that the dm modules are not in the environment.
mkinitcpio changed that it could be that dm-* was not added.
Damn, you could solve this by manually extracting those modules from the kernel26 package.

Offline

#4 2011-05-16 20:31:30

tpowa
Developer
From: Lauingen , Germany
Registered: 2004-04-05
Posts: 2,322

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

Ok rebuilding image now, 2011-05-2 will showup soon with fixed dm modules.
Sorry for breaking this feature.

Offline

#5 2011-05-16 20:41:48

creyes123
Member
From: Albuquerque, NM, USA
Registered: 2011-05-14
Posts: 2
Website

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

Thank you!

Offline

#6 2011-05-17 03:47:41

idonthack
Member
Registered: 2010-04-04
Posts: 7

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

has the iso been taken down for some reason? all of the mirrors list a checksum for the iso in md5sum.txt, so i assume the file has been created, but i have yet to find a mirror with an actual copy of the iso. no seeders on bittorrent, either

Last edited by idonthack (2011-05-17 03:51:28)

Offline

#7 2011-05-17 05:25:38

tpowa
Developer
From: Lauingen , Germany
Registered: 2004-04-05
Posts: 2,322

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

I removed the -1 iso 8 hours ago, the -2 iso  syncs since 2 hours to the servers, just be patient.
Some servers already got it.

Last edited by tpowa (2011-05-17 05:36:16)

Offline

#8 2011-05-19 17:33:27

steve___
Member
Registered: 2008-02-24
Posts: 452

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

Hello,
What is the difference between an old archboot CD (eg 2009.09) and this one?  I assume the new CDs now supoort EFI.  With all three of our mac mini's the 2009.09 archboot CD works fine.  With two of our mac mini (I haven't tested the third), using the new archboot CD I get a prompt:

Select CD-ROM Boot Type :
1.
2.

At this prompt there is no keyboard response.

With one of the mac mini, if I hold down 'ALT' I get a gui prompt.  If I select 'EFI' with the picture of a CD the boot disk loads.  Unfortunately the other mac mini goes to the 'Select CD-ROM Boot Type :'.

If my assumption regarding the EFI support on the newer boot disks is correct, is there a nice way for me to create a boot CD without EFI support for testing?

Last edited by steve___ (2011-05-20 19:58:29)

Offline

#9 2011-05-19 19:28:10

broken pipe
Member
Registered: 2010-12-10
Posts: 238

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

thanks! will be installed on my new thinkpad tomorrow smile

Offline

#10 2011-05-20 07:09:01

Angus_Yann
Member
From: Linux Planet
Registered: 2009-10-28
Posts: 11
Website

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

I'm trying Archboot and it looks great.
But an error occurred when it comes to "Install Packages". Msg shows that no /src/core-* found. So the installation is stopped.
How can I do?


Angel + Devil = Angus Yann

Offline

#11 2011-05-20 19:54:40

tpowa
Developer
From: Lauingen , Germany
Registered: 2004-04-05
Posts: 2,322

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

Have you mount the medium to /src ?
Or what exactly have you done?

Offline

#12 2011-05-21 00:04:16

Angus_Yann
Member
From: Linux Planet
Registered: 2009-10-28
Posts: 11
Website

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

tpowa wrote:

Have you mount the medium to /src ?
Or what exactly have you done?

No, I don't know how to mount those core-* directions. When and how to do this?
I've just inserted the USB, then typed /arch/setup to install. But when it comes to Install Packages stage, an error occurred.
Thanks.

Last edited by Angus_Yann (2011-05-21 00:05:53)


Angel + Devil = Angus Yann

Offline

#13 2011-05-21 06:07:47

tpowa
Developer
From: Lauingen , Germany
Registered: 2004-04-05
Posts: 2,322

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

Then it seems the setup routine cannot detect your usbstick.
Look at /dev for sdX devices, type dmesg and grep for them to see which is your usbstick.
Then type:mount /dev/sdX /src
and all will work.

Offline

#14 2011-05-22 11:25:20

sl1pkn07
Member
From: Spanishtán
Registered: 2010-03-30
Posts: 371

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

hello, this release boot from ISO directly using isoloop Grub2 feature? (for installation from USB)

greetings

Offline

#15 2011-05-23 15:32:39

Angus_Yann
Member
From: Linux Planet
Registered: 2009-10-28
Posts: 11
Website

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

Archboot is really awesome! And I have two pieces of suggestion which may help.
1. Don't know it's my USB stick's problem or whaterever, it cannot mount core-*/pkg direction automatically. So I can only install via net for I really don't know how to mount manually.
2. Actually I suddenly forget what to say. Hmmm, maybe it's a little bit complex for a newbie for there's not enough resources available to guide. Because some part of the installation is different from the official one.
OK, that's all. And thanks for bringing us Archboot.


Angel + Devil = Angus Yann

Offline

#16 2011-05-23 15:40:39

skodabenz
Banned
From: Tamilnadu, India
Registered: 2010-04-11
Posts: 382

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

steve___ wrote:

Hello,
What is the difference between an old archboot CD (eg 2009.09) and this one?  I assume the new CDs now supoort EFI.  With all three of our mac mini's the 2009.09 archboot CD works fine.  With two of our mac mini (I haven't tested the third), using the new archboot CD I get a prompt:

Select CD-ROM Boot Type :
1.
2.

At this prompt there is no keyboard response.

With one of the mac mini, if I hold down 'ALT' I get a gui prompt.  If I select 'EFI' with the picture of a CD the boot disk loads.  Unfortunately the other mac mini goes to the 'Select CD-ROM Boot Type :'.

If my assumption regarding the EFI support on the newer boot disks is correct, is there a nice way for me to create a boot CD without EFI support for testing?

Didn't you ask the same question in the previous release thread - https://bbs.archlinux.org/viewtopic.php … 46#p909446


My new forum user/nick name is "the.ridikulus.rat" .

Offline

#17 2011-05-23 16:08:47

steve___
Member
Registered: 2008-02-24
Posts: 452

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

skodabenz wrote:

Didn't you ask the same question in the previous release thread - https://bbs.archlinux.org/viewtopic.php … 46#p909446

That thread pertains to the first mac mini (version 2,1) I was testing on.  This thread pertains to another mac mini, version 1,1.  The difference was holding down the ALT key wasn't loading the GUI mac boot loader (or whatever it is called).  I found that the keyboard must be in the far right (when looking at the back of the mac mini) USB port in order for this to work.

My main question was "What is the difference between an old archboot CD (eg 2009.09) and this [current image]?".

Offline

#18 2011-05-23 16:16:52

skodabenz
Banned
From: Tamilnadu, India
Registered: 2010-04-11
Posts: 382

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

skodabenz wrote:
steve___ wrote:

If my assumption regarding the EFI support on the newer boot disks is correct, is there a nice way for me to create a boot CD without EFI support for testing?

Didn't you ask the same question in the previous release thread - https://bbs.archlinux.org/viewtopic.php … 46#p909446

How to create a Archboot ISO without EFI boot support? This was your question for which the answers was already given. In case of AIF (official) iso, it does not support (U)EFI, both for ISO booting or in the installer.


My new forum user/nick name is "the.ridikulus.rat" .

Offline

#19 2011-05-24 12:16:46

tpowa
Developer
From: Lauingen , Germany
Registered: 2004-04-05
Posts: 2,322

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

Angus_Yann wrote:

Archboot is really awesome! And I have two pieces of suggestion which may help.
1. Don't know it's my USB stick's problem or whaterever, it cannot mount core-*/pkg direction automatically. So I can only install via net for I really don't know how to mount manually.
2. Actually I suddenly forget what to say. Hmmm, maybe it's a little bit complex for a newbie for there's not enough resources available to guide. Because some part of the installation is different from the official one.
OK, that's all. And thanks for bringing us Archboot.

1. I gave you already an answer in my previous post, I don't know why your drive is not mounted autumatically the setup routine has a function to mount cd drive and usb drives.
ls /dev/sd* would be interesting or ls /dev/mmc*
2. It's not that different all is mentioned on the wiki imho, if something is missing just raise your questions here and I try to fix things, if needed.

Enjoy Arch and of course archboot smile

Offline

#20 2011-05-24 14:17:08

demian
Member
From: Frankfurt, Germany
Registered: 2009-05-06
Posts: 709

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

Would it be possible to include ZSH in future releases? Ideally with grml-zsh-config?

Last edited by demian (2011-05-24 14:17:55)


no place like /home
github

Offline

#21 2011-05-24 16:35:22

tpowa
Developer
From: Lauingen , Germany
Registered: 2004-04-05
Posts: 2,322

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

I don't think of adding another shell to the environment, you could use a usbstick with those packages in combination with the following boot parameter. 
- arch-addons boot parameter
    You want to load external addon packages or configs into the install environment.
    Place external addon packages in /packages directory of your external device

Offline

#22 2011-05-26 22:47:19

*vitali*
Member
Registered: 2009-12-20
Posts: 83

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

Package ntfs-3g is missing from x64, installation fails when installing from USB (was forced to install from FTP).

Offline

#23 2011-05-26 23:19:21

iab
Member
Registered: 2009-04-25
Posts: 1

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

When it comes to “install packages”, i meet the same problem with you. error: target not found ntfs-3g.
ls /src, It shows the medium /dev/sdb1 has already mounted.
i686, Create bootable USB with dd command.

Last edited by iab (2011-05-26 23:21:04)

Offline

#24 2011-05-29 05:49:44

kyle12
Member
Registered: 2009-10-29
Posts: 5

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

I can't for the life of me get past the start screen (Using PXE)... The Wiki has some incorrect information. But I can't boot Memtest, Or any of the installation options. When I press enter it just returns back to the main screen (like it redraws).

Has anyone gotten this to work?

Offline

#25 2011-05-29 17:54:59

tpowa
Developer
From: Lauingen , Germany
Registered: 2004-04-05
Posts: 2,322

Re: 2011.05-2 archboot "2k11-R2" ISO hybrid image released

Cant't you just tell it to use one kernel and initrd? without any menu.
Haven't done any PXE stuff latetly but afaik you can configure everything.

Offline

Board footer

Powered by FluxBB