You are not logged in.

#26 2011-07-16 03:36:28

bwat47
Member
Registered: 2009-10-07
Posts: 638

Re: Flash 11 beta with x86_64 support!!!

Gusar wrote:
Griemak wrote:

I have hardware acceleration enabled and working.  I watched the video in the link earlier and it was very smooth full screen.
http://www.gamestar.de/index.cfm?pid=1589&pk=18888

But it jumped 3 cores to 30-45% with the fourth core hovering in the high teens.  Half way through, the cores dropped to mid-high teens across all 4.  I hope a little more optimization occurs, but since it's proprietary, it is left simply as a hope sad

Because Adobe can't get the "presentation" part of VDPAU right, they've disabled it for now, so we only have the "decode" part of VDPAU currently. So there's definitely room of improvement, in Adobe properly implementing hardware presentation.

Argh, if they have this much trouble getting vdpau right, we'll probably never get vaapi.

Offline

#27 2011-07-16 17:41:30

Griemak
Member
Registered: 2011-05-10
Posts: 46

Re: Flash 11 beta with x86_64 support!!!

jskier wrote:
Griemak wrote:

But it jumped 3 cores to 30-45% with the fourth core hovering in the high teens.

Runs fine on an older Core2 duo, starts two cores around 10% ~ 15%. I think you need to ensure /etc/adobe/mms.cfg is set properly.

I've had hard system lock ups with Amazon Instant Video on occasion with the beta, but overall big improvements with hardware acceleration. Full screen has a very subtle flicker that comes and goes too.

Thank you, I thought the right-click menu into "settings" was enough, but I had to enter "EnableLinuxHWVideoDecode=1" manually.  I did something wrong somewhere.

After the first second or two, all cores plummet to ~5% on full screen video now.  I also noticed the very subtle full screen flicker.  Actually, backing up my chair just a bit makes it unnoticeable, so very subtle indeed smile


There are only two ways to live your life: One is as though nothing is a miracle. The other is as though everything is a miracle. - Albert Einstein

How wonderful it is that nobody need wait a single moment before starting to improve the world. - Anne Frank

Offline

#28 2011-07-16 18:02:51

skottish
Forum Fellow
From: Here
Registered: 2006-06-16
Posts: 7,942

Re: Flash 11 beta with x86_64 support!!!

Yeah, the hardware decoding needs some work. With the video that Griemak posted at full screen, a quick htop snapshot of the six core, 3.4Ghz processor on this machine is:

47.7%, 14.6%, 21.5%, 34.7%, 9.9%, 2.6%

Using mplayer2 with vdpau to decode a Blu-Ray video that mediainfo reports as having a 33.1Mbps overall bit rate, this is what I get:

0.7%, 0.0%, 0.0%, 0.0%, 4.0%, 0.0%

Offline

#29 2011-07-16 22:47:21

chriseggroll
Member
Registered: 2007-02-04
Posts: 64

Re: Flash 11 beta with x86_64 support!!!

Cdh wrote:

It has a new 3D API. They seem to want to make a new generation of flash games.
Here is a demo application:
http://alternativaplatform.com/en/demos/maxracer/

I tried the "high" version on Arch and on Windows 7. On Windows 7 it's actually kind of playable. Not very smooth, but playable.

On Linux it's horrible. It's like the whole thing is done in software rendering. Actually I think a well written 3d animation in pure software rendering would be faster.

Both with my laptop with an i5 480 and hd 6550 with catalyst 11.6.

I really wonder: Do they do that on purpose? Is it possible for them to write such bad portable code?


I think they haven't implemented the full hardware acceleration for Linux, as I have the same problem.  The demo in Arch is unplayable, but it works great under XP.  Someone on the beta aur page suggested checking the .cfg in /etc/adobe/ to make sure the hardware acceleration option wasn't commented out, but it was uncommented on mine already.  They also have stopped developing Air for Linux, so no Air 3 sad  This really annoys me because a game I play runs on Air and was looking forward to it making use of my video card for once tongue

Offline

#30 2011-07-17 11:31:52

dimitar
Member
Registered: 2011-01-27
Posts: 59

Re: Flash 11 beta with x86_64 support!!!

kcm_adobe_flash_player.desktop yay! \ smile /

Offline

#31 2011-07-17 13:17:14

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: Flash 11 beta with x86_64 support!!!

I recall an old joke that went something like this:
Q: When will a proper 64-bit Flash come out?
A: The day after Duke Nukem Forever release.

They were off by a month, but I'm getting worried about that end of the world in 2012 ;P

Offline

#32 2011-07-17 13:56:15

Gusar
Member
Registered: 2009-08-25
Posts: 3,605

Re: Flash 11 beta with x86_64 support!!!

karol wrote:

I recall an old joke that went something like this:
Q: When will a proper 64-bit Flash come out?
A: The day after Duke Nukem Forever release.

They were off by a month, but I'm getting worried about that end of the world in 2012 ;P

LOOOOOOOL, perfect!

Offline

#33 2011-07-17 17:35:35

karabaja4
Member
From: Croatia
Registered: 2008-09-14
Posts: 997
Website

Re: Flash 11 beta with x86_64 support!!!

Hardware acceleration doesn't work for me with VDPAU, video clip performance is the same as flashplugin 10.x, the test demo from the posted link runs on approximately 0.5 fps.
(yes I have EnableLinuxHWVideoDecode=1).

Offline

#34 2011-07-17 19:37:12

MrCode
Member
Registered: 2010-02-06
Posts: 373

Re: Flash 11 beta with x86_64 support!!!

Hardware acceleration doesn't work for me with VDPAU, video clip performance is the same as flashplugin 10.x, the test demo from the posted link runs on approximately 0.5 fps.

What's your WM?  If it's Compiz, then you're probably out of luck; Flash's VDPAU doesn't work with Compiz…

I would post a link with more info, but I can't remember where I found it. sad

Offline

#35 2011-07-17 19:46:22

bwat47
Member
Registered: 2009-10-07
Posts: 638

Re: Flash 11 beta with x86_64 support!!!

MrCode wrote:

Hardware acceleration doesn't work for me with VDPAU, video clip performance is the same as flashplugin 10.x, the test demo from the posted link runs on approximately 0.5 fps.

What's your WM?  If it's Compiz, then you're probably out of luck; Flash's VDPAU doesn't work with Compiz…

lol, seriously? Man flash is hopeless.

Offline

#36 2011-07-17 19:51:10

karabaja4
Member
From: Croatia
Registered: 2008-09-14
Posts: 997
Website

Re: Flash 11 beta with x86_64 support!!!

MrCode wrote:

Hardware acceleration doesn't work for me with VDPAU, video clip performance is the same as flashplugin 10.x, the test demo from the posted link runs on approximately 0.5 fps.

What's your WM?  If it's Compiz, then you're probably out of luck; Flash's VDPAU doesn't work with Compiz…

I would post a link with more info, but I can't remember where I found it. sad

I'm using Openbox with no compositing. Otherwise VDPAU works fine in (s)mplayer.

Offline

#37 2011-07-17 21:35:31

Gusar
Member
Registered: 2009-08-25
Posts: 3,605

Re: Flash 11 beta with x86_64 support!!!

Did you activate hw decoding in /etc/adobe/mms.cfg? It should work then. But only decoding, not presentation.

Offline

#38 2011-07-17 21:51:52

karabaja4
Member
From: Croatia
Registered: 2008-09-14
Posts: 997
Website

Re: Flash 11 beta with x86_64 support!!!

Gusar wrote:

Did you activate hw decoding in /etc/adobe/mms.cfg? It should work then. But only decoding, not presentation.

It has been activated by default.

I don't know how to differentiate between decoding and presentation. All I know is that my CPU is heavily (ab)used by flash videos, while 1080p in mplayer uses VDPAU with no problems.

For example, I can't run this in fullscreen 720p (or even 360p) without my CPU dying on me (video is stuttering heavily).

Last edited by karabaja4 (2011-07-17 22:01:01)

Offline

#39 2011-07-17 22:12:48

Gusar
Member
Registered: 2009-08-25
Posts: 3,605

Re: Flash 11 beta with x86_64 support!!!

Right-click on the video, choose "display video info" or something in that direction. It should say "software video rendering, accelerated video decoding". If you have that, it's the most this version of flash will give you. It makes sense that it's a lot slower than if presentation was accelerated too - because now decoded frames are being copied back into system ram (takes cpu resources) and then blended with the rest of the ui in software (takes even more cpu resources).

Offline

#40 2011-07-18 00:08:56

karabaja4
Member
From: Croatia
Registered: 2008-09-14
Posts: 997
Website

Re: Flash 11 beta with x86_64 support!!!

Gusar wrote:

Right-click on the video, choose "display video info" or something in that direction. It should say "software video rendering, accelerated video decoding". If you have that, it's the most this version of flash will give you. It makes sense that it's a lot slower than if presentation was accelerated too - because now decoded frames are being copied back into system ram (takes cpu resources) and then blended with the rest of the ui in software (takes even more cpu resources).

Yes, it says "software video rendering, accelerated video decoding". So I guess Flash still sucks.

Offline

#41 2011-07-18 05:57:48

ScionicSpectre
Member
Registered: 2011-06-25
Posts: 98

Re: Flash 11 beta with x86_64 support!!!

This actually has a pretty good improvement on my Intel HD graphics over using the wrapped version, although I'm not sure how it compared to the old 64-bit version. Definitely having an ultra-smooth experience that allows me to multitask heavily while viewing high definition video. Good move, Adobe- you're getting there.

Offline

#42 2011-07-18 09:40:53

marvn
Member
From: Prague
Registered: 2010-01-05
Posts: 84

Re: Flash 11 beta with x86_64 support!!!

hi,

hw acceleration with vdpau works for me, after I've checked this in flash optioms. But when my system freeze second time after I've opened youtube video in an another tab to the state, that i can only move cursor, I've had to comment out the "EnableLinuxHWVideoDecode=1" line /etc/adobe/mms.cfg. No freeze after that, but I'm still not sure that the hw acc was the issue and I didn't find anything useful in logs. Anyone else having these kind of problems?

btw. from logs it seems that there were no issues with the system, so maybe using ssh I could have kill flash plugin, but this wasn't an option at the time when the freezes occured

Last edited by marvn (2011-07-18 09:47:15)


core i5 4590, x86_64, nvidia 970

Offline

#43 2011-07-18 09:52:16

litemotiv
Forum Fellow
Registered: 2008-08-01
Posts: 5,026

Re: Flash 11 beta with x86_64 support!!!

marvn, not a direct answer to your question, but for Youtube i would recommend signing up for the html5 trial: http://www.youtube.com/html5


ᶘ ᵒᴥᵒᶅ

Offline

#44 2011-07-18 09:55:51

Gusar
Member
Registered: 2009-08-25
Posts: 3,605

Re: Flash 11 beta with x86_64 support!!!

karabaja4 wrote:

Yes, it says "software video rendering, accelerated video decoding". So I guess Flash still sucks.

So what else is new? smile

You can always go back to the "stable" Flash 10. It has it's share of overlay bugs, but it does have hardware presentation support.

Offline

#45 2011-07-18 12:17:30

karabaja4
Member
From: Croatia
Registered: 2008-09-14
Posts: 997
Website

Re: Flash 11 beta with x86_64 support!!!

marvn wrote:

hi,

hw acceleration with vdpau works for me, after I've checked this in flash optioms. But when my system freeze second time after I've opened youtube video in an another tab to the state, that i can only move cursor, I've had to comment out the "EnableLinuxHWVideoDecode=1" line /etc/adobe/mms.cfg. No freeze after that, but I'm still not sure that the hw acc was the issue and I didn't find anything useful in logs. Anyone else having these kind of problems?

btw. from logs it seems that there were no issues with the system, so maybe using ssh I could have kill flash plugin, but this wasn't an option at the time when the freezes occured

Yeah, I had my Xorg freeze unrecoverably a few times when watching youtube videos since the new flash.

Offline

#46 2011-07-18 13:12:36

marvn
Member
From: Prague
Registered: 2010-01-05
Posts: 84

Re: Flash 11 beta with x86_64 support!!!

litemotiv wrote:

marvn, not a direct answer to your question, but for Youtube i would recommend signing up for the html5 trial: http://www.youtube.com/html5

i know about this, but it's not as good as flash version yet (IMO). but my post was more about this behavior in general and YT was just an example...


core i5 4590, x86_64, nvidia 970

Offline

#47 2011-07-21 06:24:22

muffinss
Member
From: united states
Registered: 2011-02-07
Posts: 54

Re: Flash 11 beta with x86_64 support!!!

For some reason, with Firefox 5 64 bit and flash 11 64 bit, anytime I close out a page with flash, my entire system locks up and I have to do a hard reset. Really annoying. I downgraded to flash 10.3 64 bit since I've had no issues with it....

Last edited by muffinss (2011-07-21 06:36:42)

Offline

#48 2011-07-21 06:26:17

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: Flash 11 beta with x86_64 support!!!

muffinss wrote:

For some reason, with Firefox 5 64 bit and flash 11 64 bit, anytime I close out a page with flash, my entire system locks up and I have to a hard reset. Really annoying. I downgraded to flash 10.3 64 bit since I've had no issues with it....

Did you pause / stop the flash content before you closed the tab?

Offline

#49 2011-07-21 06:33:16

muffinss
Member
From: united states
Registered: 2011-02-07
Posts: 54

Re: Flash 11 beta with x86_64 support!!!

karol wrote:
muffinss wrote:

For some reason, with Firefox 5 64 bit and flash 11 64 bit, anytime I close out a page with flash, my entire system locks up and I have to a hard reset. Really annoying. I downgraded to flash 10.3 64 bit since I've had no issues with it....

Did you pause / stop the flash content before you closed the tab?

Yeah I did =/

Last edited by muffinss (2011-07-21 06:33:58)

Offline

#50 2011-07-28 05:59:05

triplesquarednine
Member
Registered: 2011-04-12
Posts: 630

Re: Flash 11 beta with x86_64 support!!!

ya, the new flash isn't very good (especially since i am a compiz user).

however, one trick i am using, is to watch youtube in UMplayer. Umplayer gives you vdpau and works fine with compiz. watching HD videos on youtube - my 4 cores each use around 2-3%, with the odd one spiking/peaking at 7-8%... which i think is perfectly acceptable, if not ideal...

..now if the Umplayer developers would wise up and add google videos (search) to Umplayer, then i wouldn't even open a browser to watch video content on the web, and i would actually get to use vdpau in a useful way for online media.

Offline

Board footer

Powered by FluxBB