You are not logged in.
Hi!
I don't see my wired network interface coming up on ifconfig. Doing ifconfig eth0 gives this:
eth0: error fetching interface information: Device not foundifconfig -a
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:16180 errors:0 dropped:0 overruns:0 frame:0
TX packets:16180 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:14836785 (14.1 Mb) TX bytes:14836785 (14.1 Mb)
wlan0 Link encap:Ethernet HWaddr 00:26:C6:CC:13:9E
inet addr:81.162.145.51 Bcast:81.162.145.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:201204 errors:0 dropped:28 overruns:0 frame:0
TX packets:9442 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:61376799 (58.5 Mb) TX bytes:2278897 (2.1 Mb)
wwan0 Link encap:Ethernet HWaddr 02:80:37:EC:02:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)wwan0 is my onboard HDSPA modem.
lshw -C network gives the following output (snipped the relevant parts out):
*-network UNCLAIMED
description: Ethernet controller
product: 82567LM Gigabit Network Connection
vendor: Intel Corporation
physical id: 19
bus info: pci@0000:00:19.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: pm msi cap_list
configuration: latency=0
resources: memory:f2700000-f271ffff memory:f2925000-f2925fff ioport:1840(size=32)Here's the lsmod:
Module Size Used by
fuse 67290 3
ext2 63714 1
snd_hda_codec_conexant 42148 1
uvcvideo 62143 0
videodev 78070 1 uvcvideo
zaurus 2944 0
cdc_ether 4246 1 zaurus
media 10437 1 videodev
v4l2_compat_ioctl32 8364 1 videodev
usbnet 15370 2 zaurus,cdc_ether
cdc_acm 16401 0
cdc_wdm 8445 0
mii 4003 1 usbnet
btusb 11585 0
bluetooth 128303 1 btusb
arc4 1450 2
ecb 2113 2
iwlagn 400315 0
mac80211 211662 1 iwlagn
i915 648410 2
cfg80211 146369 2 iwlagn,mac80211
drm_kms_helper 27529 1 i915
snd_hda_intel 22186 2
thinkpad_acpi 62359 0
snd_hda_codec 77543 2 snd_hda_codec_conexant,snd_hda_intel
sg 25621 0
snd_hwdep 6342 1 snd_hda_codec
psmouse 54752 0
snd_pcm 73736 2 snd_hda_intel,snd_hda_codec
snd_timer 19488 1 snd_pcm
pcspkr 1891 0
serio_raw 4366 0
drm 181991 3 i915,drm_kms_helper
tpm_tis 8265 0
snd 57256 11 snd_hda_codec_conexant,snd_hda_intel,thinkpad_acpi,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
i2c_i801 8195 0
e1000e 142738 0
nvram 5845 1 thinkpad_acpi
i2c_algo_bit 5239 1 i915
tpm 11621 1 tpm_tis
soundcore 6178 1 snd
iTCO_wdt 12781 0
battery 10945 0
i2c_core 20165 6 videodev,i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit
wmi 8387 0
thermal 7903 0
tpm_bios 5097 1 tpm
intel_agp 10848 1 i915
iTCO_vendor_support 1969 1 iTCO_wdt
ac 3305 0
snd_page_alloc 7161 2 snd_hda_intel,snd_pcm
video 11300 1 i915
button 4510 1 i915
processor 24328 2
intel_gtt 14359 3 i915,intel_agp
evdev 9530 17
rfkill 15498 4 bluetooth,cfg80211,thinkpad_acpi
ext4 368162 2
mbcache 5793 2 ext2,ext4
jbd2 70956 1 ext4
crc16 1337 2 bluetooth,ext4
sd_mod 27379 5
ahci 20905 4
uhci_hcd 22435 0
libahci 18925 1 ahci
libata 173061 2 ahci,libahci
ehci_hcd 39359 0
scsi_mod 130020 3 sg,sd_mod,libata
usbcore 142192 10 uvcvideo,zaurus,cdc_ether,usbnet,cdc_acm,cdc_wdm,btusb,uhci_hcd,ehci_hcdGoogling around it seems the 82567LM chipset needs the e1000e or igb, but modprobing the other one doesn't seem to help either. My dmesg is here: http://pastie.org/2349849.
What could be the problem here? How come the card is 'UNCLAIMED' when the proper driver is loaded? Thanks in advance.
EDIT:
I pacman -Syu'd for good measure. Here's my uname -a.
Linux basse 3.0-ARCH #1 SMP PREEMPT Sat Aug 6 16:18:35 CEST 2011 x86_64 Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz GenuineIntel GNU/LinuxLast edited by jchillerup (2011-08-10 12:05:45)
Offline
Welcome to the forums, jchillerup.
When pasting code, please use [ code ] tags https://bbs.archlinux.org/help.php#bbcode not [ quote ] tags.
like thisIt makes the code more readable and more convenient to scroll through.
Please edit your post.
Offline
Thanks, I fixed it. (not the problem, though)
Last edited by jchillerup (2011-08-10 12:29:21)
Offline