You are not logged in.
Pages: 1
Hi
I have ASUS k50ij, XFCE is installed as Desktop environment. After 10 minutes of inactivity i got a blank screen. I have disabled XFCE power manager, i have stoped acpid and laptop-mode-tools daemon, but i still get a blank screen after 10 minutes of inactivity. Who controls that actions? How can i change it?
Thanks
Xorg log:
[ 28.220]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 28.221]
X.Org X Server 1.10.3.901 (1.10.4 RC 1)
Release Date: 2011-07-29
[ 28.221] X Protocol Version 11, Revision 0
[ 28.221] Build Operating System: Linux 3.0.0-ARCH i686
[ 28.221] Current Operating System: Linux saso-laptop 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 20:24:07 UTC 2011 i686
[ 28.221] Kernel command line: root=/dev/sda1 ro quiet acpi_osi=Linux acpi_backlight=vendor
[ 28.221] Build Date: 08 August 2011 08:28:07AM
[ 28.221]
[ 28.221] Current version of pixman: 0.22.2
[ 28.221] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 28.221] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 28.222] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 20 12:27:35 2011
[ 28.343] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 28.395] (==) No Layout section. Using the first Screen section.
[ 28.395] (==) No screen section available. Using defaults.
[ 28.395] (**) |-->Screen "Default Screen Section" (0)
[ 28.395] (**) | |-->Monitor "<default monitor>"
[ 28.395] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 28.395] (==) Automatically adding devices
[ 28.395] (==) Automatically enabling devices
[ 28.454] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 28.454] Entry deleted from font path.
[ 28.489] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 28.489] Entry deleted from font path.
[ 28.489] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 28.490] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 28.490] Entry deleted from font path.
[ 28.490] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 28.490] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 28.490] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 28.490] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 28.490] (II) Loader magic: 0x822e4e0
[ 28.490] (II) Module ABI versions:
[ 28.490] X.Org ANSI C Emulation: 0.4
[ 28.490] X.Org Video Driver: 10.0
[ 28.490] X.Org XInput driver : 12.2
[ 28.490] X.Org Server Extension : 5.0
[ 28.491] (--) PCI:*(0:0:2:0) 8086:2a42:1043:1862 rev 9, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8
[ 28.491] (--) PCI: (0:0:2:1) 8086:2a43:1043:1862 rev 9, Mem @ 0xfe800000/1048576
[ 28.491] (II) Open ACPI successful (/var/run/acpid.socket)
[ 28.491] (II) LoadModule: "extmod"
[ 28.509] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 28.524] (II) Module extmod: vendor="X.Org Foundation"
[ 28.524] compiled for 1.10.3.901, module version = 1.0.0
[ 28.524] Module class: X.Org Server Extension
[ 28.524] ABI class: X.Org Server Extension, version 5.0
[ 28.524] (II) Loading extension MIT-SCREEN-SAVER
[ 28.524] (II) Loading extension XFree86-VidModeExtension
[ 28.524] (II) Loading extension XFree86-DGA
[ 28.524] (II) Loading extension DPMS
[ 28.524] (II) Loading extension XVideo
[ 28.524] (II) Loading extension XVideo-MotionCompensation
[ 28.524] (II) Loading extension X-Resource
[ 28.524] (II) LoadModule: "dbe"
[ 28.525] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 28.537] (II) Module dbe: vendor="X.Org Foundation"
[ 28.537] compiled for 1.10.3.901, module version = 1.0.0
[ 28.537] Module class: X.Org Server Extension
[ 28.537] ABI class: X.Org Server Extension, version 5.0
[ 28.537] (II) Loading extension DOUBLE-BUFFER
[ 28.537] (II) LoadModule: "glx"
[ 28.537] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 28.561] (II) Module glx: vendor="X.Org Foundation"
[ 28.561] compiled for 1.10.3.901, module version = 1.0.0
[ 28.561] ABI class: X.Org Server Extension, version 5.0
[ 28.561] (==) AIGLX enabled
[ 28.561] (II) Loading extension GLX
[ 28.561] (II) LoadModule: "record"
[ 28.561] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 28.562] (II) Module record: vendor="X.Org Foundation"
[ 28.562] compiled for 1.10.3.901, module version = 1.13.0
[ 28.562] Module class: X.Org Server Extension
[ 28.562] ABI class: X.Org Server Extension, version 5.0
[ 28.562] (II) Loading extension RECORD
[ 28.562] (II) LoadModule: "dri"
[ 28.563] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 28.570] (II) Module dri: vendor="X.Org Foundation"
[ 28.570] compiled for 1.10.3.901, module version = 1.0.0
[ 28.570] ABI class: X.Org Server Extension, version 5.0
[ 28.570] (II) Loading extension XFree86-DRI
[ 28.570] (II) LoadModule: "dri2"
[ 28.570] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 28.579] (II) Module dri2: vendor="X.Org Foundation"
[ 28.579] compiled for 1.10.3.901, module version = 1.2.0
[ 28.579] ABI class: X.Org Server Extension, version 5.0
[ 28.579] (II) Loading extension DRI2
[ 28.579] (==) Matched intel as autoconfigured driver 0
[ 28.579] (==) Matched vesa as autoconfigured driver 1
[ 28.579] (==) Matched fbdev as autoconfigured driver 2
[ 28.579] (==) Assigned the driver to the xf86ConfigLayout
[ 28.579] (II) LoadModule: "intel"
[ 28.579] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 28.598] (II) Module intel: vendor="X.Org Foundation"
[ 28.598] compiled for 1.10.2, module version = 2.15.0
[ 28.598] Module class: X.Org Video Driver
[ 28.598] ABI class: X.Org Video Driver, version 10.0
[ 28.598] (II) LoadModule: "vesa"
[ 28.600] (WW) Warning, couldn't open module vesa
[ 28.600] (II) UnloadModule: "vesa"
[ 28.600] (II) Unloading vesa
[ 28.600] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 28.602] (II) LoadModule: "fbdev"
[ 28.602] (WW) Warning, couldn't open module fbdev
[ 28.602] (II) UnloadModule: "fbdev"
[ 28.602] (II) Unloading fbdev
[ 28.602] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 28.604] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 28.604] (--) using VT number 7
[ 28.612] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 28.612] drmOpenDevice: node name is /dev/dri/card0
[ 28.612] drmOpenDevice: open result is 9, (OK)
[ 28.612] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 28.612] drmOpenDevice: node name is /dev/dri/card0
[ 28.612] drmOpenDevice: open result is 9, (OK)
[ 28.612] drmOpenByBusid: drmOpenMinor returns 9
[ 28.612] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 28.612] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 28.612] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 28.612] (==) intel(0): RGB weight 888
[ 28.612] (==) intel(0): Default visual is TrueColor
[ 28.613] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 28.613] (--) intel(0): Chipset: "GM45"
[ 28.613] (**) intel(0): Relaxed fencing enabled
[ 28.613] (**) intel(0): Framebuffer tiled
[ 28.613] (**) intel(0): Pixmaps tiled
[ 28.613] (**) intel(0): 3D buffers tiled
[ 28.613] (**) intel(0): SwapBuffers wait enabled
[ 28.613] (==) intel(0): video overlay key set to 0x101fe
[ 28.613] (II) intel(0): Output LVDS1 has no monitor section
[ 28.630] (II) intel(0): Output VGA1 has no monitor section
[ 29.163] (II) intel(0): Output HDMI1 has no monitor section
[ 29.164] (II) intel(0): Output DP1 has no monitor section
[ 29.165] (II) intel(0): Output DP2 has no monitor section
[ 29.165] (II) intel(0): EDID for output LVDS1
[ 29.165] (II) intel(0): Manufacturer: LGD Model: 1e8 Serial#: 0
[ 29.165] (II) intel(0): Year: 2008 Week: 0
[ 29.165] (II) intel(0): EDID Version: 1.3
[ 29.165] (II) intel(0): Digital Display Input
[ 29.165] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 29.165] (II) intel(0): Gamma: 2.20
[ 29.165] (II) intel(0): No DPMS capabilities specified
[ 29.165] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 29.165] (II) intel(0): First detailed timing is preferred mode
[ 29.165] (II) intel(0): redX: 0.618 redY: 0.355 greenX: 0.335 greenY: 0.584
[ 29.165] (II) intel(0): blueX: 0.150 blueY: 0.102 whiteX: 0.313 whiteY: 0.329
[ 29.165] (II) intel(0): Manufacturer's mask: 0
[ 29.165] (II) intel(0): Supported detailed timing:
[ 29.165] (II) intel(0): clock: 72.3 MHz Image Size: 344 x 194 mm
[ 29.165] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 29.165] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 790 v_border: 0
[ 29.165] (II) intel(0): LG Display
[ 29.165] (II) intel(0): LP156WH2-TLA1
[ 29.165] (II) intel(0): EDID (in hex):
[ 29.165] (II) intel(0): 00ffffffffffff0030e4e80100000000
[ 29.165] (II) intel(0): 00120103802213780a4e859e5b559526
[ 29.165] (II) intel(0): 1a505400000001010101010101010101
[ 29.165] (II) intel(0): 0101010101013e1c56a0500016303020
[ 29.165] (II) intel(0): 350058c2100000190000000000000000
[ 29.165] (II) intel(0): 00000000000000000000000000fe004c
[ 29.165] (II) intel(0): 4720446973706c61790a2020000000fe
[ 29.165] (II) intel(0): 004c503135365748322d544c4131004d
[ 29.165] (II) intel(0): EDID vendor "LGD", prod id 488
[ 29.165] (II) intel(0): Printing DDC gathered Modelines:
[ 29.166] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 29.166] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 29.166] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 29.166] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 29.166] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 29.166] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 29.166] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 29.166] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 29.166] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 29.166] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 29.166] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 29.166] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 29.166] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 29.166] (II) intel(0): Printing probed modes for output LVDS1
[ 29.166] (II) intel(0): Modeline "1366x768"x60.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 29.166] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 29.166] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 29.166] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 29.166] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 29.183] (II) intel(0): EDID for output VGA1
[ 29.716] (II) intel(0): EDID for output HDMI1
[ 29.717] (II) intel(0): EDID for output DP1
[ 29.718] (II) intel(0): EDID for output DP2
[ 29.718] (II) intel(0): Output LVDS1 connected
[ 29.718] (II) intel(0): Output VGA1 disconnected
[ 29.718] (II) intel(0): Output HDMI1 disconnected
[ 29.718] (II) intel(0): Output DP1 disconnected
[ 29.718] (II) intel(0): Output DP2 disconnected
[ 29.718] (II) intel(0): Using exact sizes for initial modes
[ 29.718] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 29.718] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 29.718] (II) intel(0): Kernel page flipping support detected, enabling
[ 29.718] (**) intel(0): Display dimensions: (340, 190) mm
[ 29.718] (**) intel(0): DPI set to (102, 102)
[ 29.718] (II) Loading sub module "fb"
[ 29.719] (II) LoadModule: "fb"
[ 29.719] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 29.720] (II) Module fb: vendor="X.Org Foundation"
[ 29.720] compiled for 1.10.3.901, module version = 1.0.0
[ 29.720] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29.720] (II) Loading sub module "dri2"
[ 29.720] (II) LoadModule: "dri2"
[ 29.720] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 29.720] (II) Module dri2: vendor="X.Org Foundation"
[ 29.720] compiled for 1.10.3.901, module version = 1.2.0
[ 29.720] ABI class: X.Org Server Extension, version 5.0
[ 29.720] (==) Depth 24 pixmap format is 32 bpp
[ 29.720] (II) intel(0): [DRI2] Setup complete
[ 29.720] (II) intel(0): [DRI2] DRI driver: i965
[ 29.720] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 29.735] (II) UXA(0): Driver registered support for the following operations:
[ 29.735] (II) solid
[ 29.735] (II) copy
[ 29.735] (II) composite (RENDER acceleration)
[ 29.735] (II) put_image
[ 29.735] (II) get_image
[ 29.735] (==) intel(0): Backing store disabled
[ 29.735] (==) intel(0): Silken mouse enabled
[ 29.736] (II) intel(0): Initializing HW Cursor
[ 29.756] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 29.757] (==) intel(0): DPMS enabled
[ 29.757] (==) intel(0): Intel XvMC decoder enabled
[ 29.757] (II) intel(0): Set up textured video
[ 29.757] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 29.757] (II) intel(0): direct rendering: DRI2 Enabled
[ 29.757] (==) intel(0): hotplug detection: "enabled"
[ 29.757] (--) RandR disabled
[ 29.757] (II) Initializing built-in extension Generic Event Extension
[ 29.757] (II) Initializing built-in extension SHAPE
[ 29.757] (II) Initializing built-in extension MIT-SHM
[ 29.757] (II) Initializing built-in extension XInputExtension
[ 29.757] (II) Initializing built-in extension XTEST
[ 29.757] (II) Initializing built-in extension BIG-REQUESTS
[ 29.757] (II) Initializing built-in extension SYNC
[ 29.757] (II) Initializing built-in extension XKEYBOARD
[ 29.757] (II) Initializing built-in extension XC-MISC
[ 29.757] (II) Initializing built-in extension SECURITY
[ 29.757] (II) Initializing built-in extension XINERAMA
[ 29.757] (II) Initializing built-in extension XFIXES
[ 29.757] (II) Initializing built-in extension RENDER
[ 29.757] (II) Initializing built-in extension RANDR
[ 29.757] (II) Initializing built-in extension COMPOSITE
[ 29.757] (II) Initializing built-in extension DAMAGE
[ 29.963] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 29.963] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 29.963] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 29.963] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 29.963] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 29.963] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[ 29.963] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 29.964] (II) intel(0): Setting screen physical size to 361 x 203
[ 30.270] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 30.270] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.270] (II) LoadModule: "evdev"
[ 30.270] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.279] (II) Module evdev: vendor="X.Org Foundation"
[ 30.279] compiled for 1.10.0, module version = 2.6.0
[ 30.279] Module class: X.Org XInput Driver
[ 30.279] ABI class: X.Org XInput driver, version 12.2
[ 30.279] (II) Using input driver 'evdev' for 'Power Button'
[ 30.279] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.279] (**) Power Button: always reports core events
[ 30.279] (**) Power Button: Device: "/dev/input/event4"
[ 30.279] (--) Power Button: Found keys
[ 30.279] (II) Power Button: Configuring as keyboard
[ 30.279] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 30.279] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.279] (**) Option "xkb_rules" "evdev"
[ 30.279] (**) Option "xkb_model" "evdev"
[ 30.279] (**) Option "xkb_layout" "us"
[ 30.311] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 30.311] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.311] (II) Using input driver 'evdev' for 'Video Bus'
[ 30.311] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.311] (**) Video Bus: always reports core events
[ 30.311] (**) Video Bus: Device: "/dev/input/event8"
[ 30.311] (--) Video Bus: Found keys
[ 30.311] (II) Video Bus: Configuring as keyboard
[ 30.311] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8/event8"
[ 30.311] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 30.311] (**) Option "xkb_rules" "evdev"
[ 30.311] (**) Option "xkb_model" "evdev"
[ 30.311] (**) Option "xkb_layout" "us"
[ 30.325] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 30.325] (II) No input driver/identifier specified (ignoring)
[ 30.325] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 30.325] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 30.325] (II) Using input driver 'evdev' for 'Sleep Button'
[ 30.325] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.326] (**) Sleep Button: always reports core events
[ 30.326] (**) Sleep Button: Device: "/dev/input/event2"
[ 30.326] (--) Sleep Button: Found keys
[ 30.326] (II) Sleep Button: Configuring as keyboard
[ 30.326] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 30.326] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 30.326] (**) Option "xkb_rules" "evdev"
[ 30.326] (**) Option "xkb_model" "evdev"
[ 30.326] (**) Option "xkb_layout" "us"
[ 30.329] (II) config/udev: Adding input device CNF7129 (/dev/input/event7)
[ 30.330] (**) CNF7129: Applying InputClass "evdev keyboard catchall"
[ 30.330] (II) Using input driver 'evdev' for 'CNF7129'
[ 30.330] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.330] (**) CNF7129: always reports core events
[ 30.330] (**) CNF7129: Device: "/dev/input/event7"
[ 30.330] (--) CNF7129: Found keys
[ 30.330] (II) CNF7129: Configuring as keyboard
[ 30.330] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input7/event7"
[ 30.330] (II) XINPUT: Adding extended input device "CNF7129" (type: KEYBOARD)
[ 30.330] (**) Option "xkb_rules" "evdev"
[ 30.330] (**) Option "xkb_model" "evdev"
[ 30.330] (**) Option "xkb_layout" "us"
[ 30.333] (II) config/udev: Adding input device MosArt Optical Mouse (/dev/input/event1)
[ 30.333] (**) MosArt Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 30.333] (II) Using input driver 'evdev' for 'MosArt Optical Mouse'
[ 30.333] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.333] (**) MosArt Optical Mouse: always reports core events
[ 30.333] (**) MosArt Optical Mouse: Device: "/dev/input/event1"
[ 30.333] (--) MosArt Optical Mouse: Found 3 mouse buttons
[ 30.333] (--) MosArt Optical Mouse: Found scroll wheel(s)
[ 30.333] (--) MosArt Optical Mouse: Found relative axes
[ 30.333] (--) MosArt Optical Mouse: Found x and y relative axes
[ 30.333] (II) MosArt Optical Mouse: Configuring as mouse
[ 30.333] (II) MosArt Optical Mouse: Adding scrollwheel support
[ 30.333] (**) MosArt Optical Mouse: YAxisMapping: buttons 4 and 5
[ 30.333] (**) MosArt Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.333] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input1/event1"
[ 30.333] (II) XINPUT: Adding extended input device "MosArt Optical Mouse" (type: MOUSE)
[ 30.333] (II) MosArt Optical Mouse: initialized for relative axes.
[ 30.333] (**) MosArt Optical Mouse: (accel) keeping acceleration scheme 1
[ 30.333] (**) MosArt Optical Mouse: (accel) acceleration profile 0
[ 30.333] (**) MosArt Optical Mouse: (accel) acceleration factor: 2.000
[ 30.334] (**) MosArt Optical Mouse: (accel) acceleration threshold: 4
[ 30.334] (II) config/udev: Adding input device MosArt Optical Mouse (/dev/input/mouse0)
[ 30.334] (II) No input driver/identifier specified (ignoring)
[ 30.338] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event5)
[ 30.338] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[ 30.338] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[ 30.338] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.338] (**) Asus Laptop extra buttons: always reports core events
[ 30.338] (**) Asus Laptop extra buttons: Device: "/dev/input/event5"
[ 30.339] (--) Asus Laptop extra buttons: Found keys
[ 30.339] (II) Asus Laptop extra buttons: Configuring as keyboard
[ 30.339] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input5/event5"
[ 30.339] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD)
[ 30.339] (**) Option "xkb_rules" "evdev"
[ 30.339] (**) Option "xkb_model" "evdev"
[ 30.339] (**) Option "xkb_layout" "us"
[ 30.339] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 30.340] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.340] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 30.340] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.340] (**) AT Translated Set 2 keyboard: always reports core events
[ 30.340] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 30.340] (--) AT Translated Set 2 keyboard: Found keys
[ 30.340] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 30.340] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 30.340] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 30.340] (**) Option "xkb_rules" "evdev"
[ 30.340] (**) Option "xkb_model" "evdev"
[ 30.340] (**) Option "xkb_layout" "us"
[ 30.341] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event6)
[ 30.341] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 30.341] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 30.341] (II) LoadModule: "synaptics"
[ 30.341] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 30.348] (II) Module synaptics: vendor="X.Org Foundation"
[ 30.348] compiled for 1.10.2, module version = 1.4.1
[ 30.348] Module class: X.Org XInput Driver
[ 30.348] ABI class: X.Org XInput driver, version 12.2
[ 30.348] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 30.348] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 30.348] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 30.348] (**) Option "Device" "/dev/input/event6"
[ 30.383] (--) ETPS/2 Elantech Touchpad: x-axis range 8 - 1144
[ 30.383] (--) ETPS/2 Elantech Touchpad: y-axis range 8 - 760
[ 30.383] (--) ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 30.383] (--) ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 30.383] (--) ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 30.383] (**) Option "HorizTwoFingerScroll" "on"
[ 30.383] (**) Option "TapButton1" "1"
[ 30.383] (**) Option "TapButton2" "2"
[ 30.383] (**) Option "TapButton3" "3"
[ 30.490] (--) ETPS/2 Elantech Touchpad: touchpad found
[ 30.490] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 30.596] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input6/event6"
[ 30.596] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD)
[ 30.596] (**) ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 30.596] (**) ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[ 30.596] (**) ETPS/2 Elantech Touchpad: AccelFactor is now 0.147
[ 30.597] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 30.597] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 30.597] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 30.597] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 30.597] (--) ETPS/2 Elantech Touchpad: touchpad found
[ 30.597] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 30.597] (II) No input driver/identifier specified (ignoring)
[ 34.378] (II) intel(0): EDID vendor "LGD", prod id 488
[ 34.378] (II) intel(0): Printing DDC gathered Modelines:
[ 34.378] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 35.239] (II) intel(0): EDID vendor "LGD", prod id 488
[ 35.239] (II) intel(0): Printing DDC gathered Modelines:
[ 35.239] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 7845.732] (II) intel(0): EDID vendor "LGD", prod id 488
[ 7845.732] (II) intel(0): Printing DDC gathered Modelines:
[ 7845.732] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 7981.029] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 7988.348] (II) Open ACPI successful (/var/run/acpid.socket)
[ 7988.348] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 7988.359] (II) intel(0): EDID vendor "LGD", prod id 488
[ 7988.359] (II) intel(0): Printing DDC gathered Modelines:
[ 7988.359] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 7988.914] (--) ETPS/2 Elantech Touchpad: touchpad found
[ 8398.719] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 8405.467] (II) Open ACPI successful (/var/run/acpid.socket)
[ 8405.467] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 8405.479] (II) intel(0): EDID vendor "LGD", prod id 488
[ 8405.479] (II) intel(0): Printing DDC gathered Modelines:
[ 8405.479] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 8406.042] (--) ETPS/2 Elantech Touchpad: touchpad found
[ 22636.411] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 22641.160] (II) Open ACPI successful (/var/run/acpid.socket)
[ 22641.160] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 22641.174] (II) intel(0): EDID vendor "LGD", prod id 488
[ 22641.174] (II) intel(0): Printing DDC gathered Modelines:
[ 22641.174] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 22641.736] (--) ETPS/2 Elantech Touchpad: touchpad found
[ 40884.951] (II) config/udev: removing device MosArt Optical Mouse
[ 40885.215] (II) MosArt Optical Mouse: Close
[ 40885.236] (II) UnloadModule: "evdev"
[ 40885.236] (II) Unloading evdev
[ 52007.336] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 52011.895] (II) Open ACPI successful (/var/run/acpid.socket)
[ 52012.386] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 52012.924] (II) intel(0): EDID vendor "LGD", prod id 488
[ 52013.107] (II) intel(0): Printing DDC gathered Modelines:
[ 52013.107] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 52013.736] (--) ETPS/2 Elantech Touchpad: touchpad found
[ 52013.792] (II) config/udev: Adding input device MosArt Optical Mouse (/dev/input/mouse0)
[ 52013.899] (II) No input driver/identifier specified (ignoring)
[ 52013.905] (II) config/udev: Adding input device MosArt Optical Mouse (/dev/input/event1)
[ 52013.905] (**) MosArt Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 52013.905] (II) Using input driver 'evdev' for 'MosArt Optical Mouse'
[ 52013.905] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 52015.101] (**) MosArt Optical Mouse: always reports core events
[ 52015.101] (**) MosArt Optical Mouse: Device: "/dev/input/event1"
[ 52015.102] (--) MosArt Optical Mouse: Found 3 mouse buttons
[ 52015.102] (--) MosArt Optical Mouse: Found scroll wheel(s)
[ 52015.102] (--) MosArt Optical Mouse: Found relative axes
[ 52015.102] (--) MosArt Optical Mouse: Found x and y relative axes
[ 52015.102] (II) MosArt Optical Mouse: Configuring as mouse
[ 52015.102] (II) MosArt Optical Mouse: Adding scrollwheel support
[ 52015.102] (**) MosArt Optical Mouse: YAxisMapping: buttons 4 and 5
[ 52015.102] (**) MosArt Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 52015.102] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input9/event1"
[ 52015.102] (II) XINPUT: Adding extended input device "MosArt Optical Mouse" (type: MOUSE)
[ 52015.102] (II) MosArt Optical Mouse: initialized for relative axes.
[ 52015.102] (**) MosArt Optical Mouse: (accel) keeping acceleration scheme 1
[ 52015.102] (**) MosArt Optical Mouse: (accel) acceleration profile 0
[ 52015.102] (**) MosArt Optical Mouse: (accel) acceleration factor: 2.000
[ 52015.102] (**) MosArt Optical Mouse: (accel) acceleration threshold: 4
[ 57206.084] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 57213.266] (II) config/udev: removing device MosArt Optical Mouse
[ 57213.267] (II) MosArt Optical Mouse: Close
[ 57213.267] (II) UnloadModule: "evdev"
[ 57213.267] (II) Unloading evdev
[ 57214.987] (II) Open ACPI successful (/var/run/acpid.socket)
[ 57214.987] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 57215.001] (II) intel(0): EDID vendor "LGD", prod id 488
[ 57215.001] (II) intel(0): Printing DDC gathered Modelines:
[ 57215.001] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 57215.628] (--) ETPS/2 Elantech Touchpad: touchpad found
[ 61642.850] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 61804.065] (II) Open ACPI successful (/var/run/acpid.socket)
[ 61804.065] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 61804.080] (II) intel(0): EDID vendor "LGD", prod id 488
[ 61804.080] (II) intel(0): Printing DDC gathered Modelines:
[ 61804.080] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 61804.639] (--) ETPS/2 Elantech Touchpad: touchpad found
[ 61950.654] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 61957.487] (II) Open ACPI successful (/var/run/acpid.socket)
[ 61957.487] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 61957.500] (II) intel(0): EDID vendor "LGD", prod id 488
[ 61957.500] (II) intel(0): Printing DDC gathered Modelines:
[ 61957.500] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 61958.065] (--) ETPS/2 Elantech Touchpad: touchpad found
[ 62034.820] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 62040.529] (II) Open ACPI successful (/var/run/acpid.socket)
[ 62040.529] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 62040.550] (II) intel(0): EDID vendor "LGD", prod id 488
[ 62040.550] (II) intel(0): Printing DDC gathered Modelines:
[ 62040.550] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 62041.113] (--) ETPS/2 Elantech Touchpad: touchpad found
[ 62071.770] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 62077.931] (II) Open ACPI successful (/var/run/acpid.socket)
[ 62077.931] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 62077.944] (II) intel(0): EDID vendor "LGD", prod id 488
[ 62077.944] (II) intel(0): Printing DDC gathered Modelines:
[ 62077.944] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 62078.519] (--) ETPS/2 Elantech Touchpad: touchpad found
[ 62088.127] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 62093.545] (II) Open ACPI successful (/var/run/acpid.socket)
[ 62093.546] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 62093.560] (II) intel(0): EDID vendor "LGD", prod id 488
[ 62093.560] (II) intel(0): Printing DDC gathered Modelines:
[ 62093.560] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 62094.131] (--) ETPS/2 Elantech Touchpad: touchpad found
[ 62197.744] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 62201.733] (II) Open ACPI successful (/var/run/acpid.socket)
[ 62201.733] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 62201.747] (II) intel(0): EDID vendor "LGD", prod id 488
[ 62201.747] (II) intel(0): Printing DDC gathered Modelines:
[ 62201.747] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 62202.305] (--) ETPS/2 Elantech Touchpad: touchpad found
[ 62204.577] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 62206.077] (II) Open ACPI successful (/var/run/acpid.socket)
[ 62206.077] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 62206.133] (II) intel(0): EDID vendor "LGD", prod id 488
[ 62206.134] (II) intel(0): Printing DDC gathered Modelines:
[ 62206.134] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 62206.691] (--) ETPS/2 Elantech Touchpad: touchpad found
[ 62254.544] (WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
[ 63531.023] (II) intel(0): EDID vendor "LGD", prod id 488
[ 63531.023] (II) intel(0): Printing DDC gathered Modelines:
[ 63531.023] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 63531.841] (II) intel(0): EDID vendor "LGD", prod id 488
[ 63531.841] (II) intel(0): Printing DDC gathered Modelines:
[ 63531.841] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 63552.770] (II) intel(0): EDID vendor "LGD", prod id 488
[ 63552.770] (II) intel(0): Printing DDC gathered Modelines:
[ 63552.770] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 63555.904] (II) intel(0): EDID vendor "LGD", prod id 488
[ 63555.904] (II) intel(0): Printing DDC gathered Modelines:
[ 63555.904] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 63557.698] (II) intel(0): EDID vendor "LGD", prod id 488
[ 63557.698] (II) intel(0): Printing DDC gathered Modelines:
[ 63557.698] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 63561.029] (II) intel(0): EDID vendor "LGD", prod id 488
[ 63561.029] (II) intel(0): Printing DDC gathered Modelines:
[ 63561.029] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 63593.540] (II) intel(0): EDID vendor "LGD", prod id 488
[ 63593.540] (II) intel(0): Printing DDC gathered Modelines:
[ 63593.540] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
[ 63595.047] (II) intel(0): EDID vendor "LGD", prod id 488
[ 63595.047] (II) intel(0): Printing DDC gathered Modelines:
[ 63595.047] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
dmesg log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Wed Aug 17 20:24:07 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000097c00 (usable)
[ 0.000000] BIOS-e820: 0000000000097c00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e1000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007dd80000 (usable)
[ 0.000000] BIOS-e820: 000000007dd80000 - 000000007dd8f000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007dd8f000 - 000000007dde0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007dde0000 - 000000007de00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: ASUSTeK Computer Inc. K50IJ /K50IJ , BIOS 209 07/10/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7dd80 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07DE00000 mask FFFE00000 uncachable
[ 0.000000] 2 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] Base memory trampoline at [c0093000] 93000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
[ 0.000000] RAMDISK: 7db59000 - 7dd70000
[ 0.000000] Allocated new RAMDISK: 375e7000 - 377fdccf
[ 0.000000] Move RAMDISK from 000000007db59000 - 000000007dd6fcce to 375e7000 - 377fdcce
[ 0.000000] ACPI: RSDP 000f93d0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 7dd80100 00084 (v01 071009 XSDT1636 20090710 MSFT 00000097)
[ 0.000000] ACPI: FACP 7dd80290 000F4 (v03 071009 FACP1636 20090710 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7dd80680 0CD1D (v01 K50IJ K50IJ209 00000209 INTL 20051117)
[ 0.000000] ACPI: FACS 7dd8f000 00040
[ 0.000000] ACPI: APIC 7dd80390 0005C (v01 071009 APIC1636 20090710 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7dd80430 0003C (v01 071009 OEMMCFG 20090710 MSFT 00000097)
[ 0.000000] ACPI: OEMX 7dd80470 00176 (v01 071009 OEMX1636 20090710 MSFT 00000097)
[ 0.000000] ACPI: ECDT 7dd80620 00054 (v01 071009 OEMECDT 20090710 MSFT 00000097)
[ 0.000000] ACPI: DBGP 7dd803f0 00034 (v01 071009 DBGP1636 20090710 MSFT 00000097)
[ 0.000000] ACPI: BOOT 7dd805f0 00028 (v01 071009 BOOT1636 20090710 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7dd8f040 00071 (v01 071009 OEMB1636 20090710 MSFT 00000097)
[ 0.000000] ACPI: HPET 7dd8d3a0 00038 (v01 071009 OEMHPET 20090710 MSFT 00000097)
[ 0.000000] ACPI: GSCI 7dd8f0c0 02024 (v01 071009 GMCHSCI 20090710 MSFT 00000097)
[ 0.000000] ACPI: ATKG 7dd912f0 08024 (v01 022008 OEMATKG 20080220 MSFT 00000097)
[ 0.000000] ACPI: SSDT 7dd99b20 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMI detected: ASUS K50IJ
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1125MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007dd80
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000097
[ 0.000000] 0: 0x00000100 -> 0x0007dd80
[ 0.000000] On node 0 totalpages: 515335
[ 0.000000] free_area_init_node: node 0, pgdat c05adc80, node_mem_map f6626200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3943 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2252 pages used for memmap
[ 0.000000] HighMem zone: 285878 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000097000 - 0000000000098000
[ 0.000000] PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000
[ 0.000000] PM: Registered nosave memory: 00000000000e1000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7de00000 (gap: 7de00000:80f20000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s25472 r0 d23680 u2097152
[ 0.000000] pcpu-alloc: s25472 r0 d23680 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511307
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet acpi_osi=Linux acpi_backlight=vendor
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 8247040 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007dd80)
[ 0.000000] Memory: 2027796k/2061824k available (3415k kernel code, 33544k reserved, 1406k data, 500k init, 1152520k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc05b6000 - 0xc0633000 ( 500 kB)
[ 0.000000] .data : 0xc0455f95 - 0xc05b5980 (1406 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0455f95 (3415 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1795.307 MHz processor.
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.22 BogoMIPS (lpj=5984356)
[ 0.003342] pid_max: default: 32768 minimum: 301
[ 0.003394] Security Framework initialized
[ 0.003400] AppArmor: AppArmor disabled by boot time parameter
[ 0.003425] Mount-cache hash table entries: 512
[ 0.003645] Initializing cgroup subsys cpuacct
[ 0.003661] Initializing cgroup subsys memory
[ 0.003672] Initializing cgroup subsys devices
[ 0.003675] Initializing cgroup subsys freezer
[ 0.003677] Initializing cgroup subsys net_cls
[ 0.003680] Initializing cgroup subsys blkio
[ 0.003723] CPU: Physical Processor ID: 0
[ 0.003725] CPU: Processor Core ID: 0
[ 0.003728] mce: CPU supports 6 MCE banks
[ 0.003736] CPU0: Thermal monitoring handled by SMI
[ 0.003741] using mwait in idle threads.
[ 0.004682] ACPI: Core revision 20110413
[ 0.016681] ftrace: allocating 15363 entries in 31 pages
[ 0.020055] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020414] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054223] CPU0: Intel Celeron(R) Dual-Core CPU T3000 @ 1.80GHz stepping 0a
[ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.056663] ... version: 2
[ 0.056663] ... bit width: 40
[ 0.056663] ... generic registers: 2
[ 0.056663] ... value mask: 000000ffffffffff
[ 0.056663] ... max period: 000000007fffffff
[ 0.056663] ... fixed-purpose events: 3
[ 0.056663] ... event mask: 0000000700000003
[ 0.073447] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.100011] CPU 1 irqstacks, hard=f54e8000 soft=f54ea000
[ 0.100014] Booting Node 0, Processors #1 Ok.
[ 0.100017] smpboot cpu 1: start_ip = 93000
[ 0.006666] Initializing CPU#1
[ 0.006666] CPU1: Thermal monitoring handled by SMI
[ 0.196685] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.203325] Brought up 2 CPUs
[ 0.203328] Total of 2 processors activated (7184.83 BogoMIPS).
[ 0.204205] devtmpfs: initialized
[ 0.204205] PM: Registering ACPI NVS region at 7dd8f000 (331776 bytes)
[ 0.204610] print_constraints: dummy:
[ 0.204679] NET: Registered protocol family 16
[ 0.204802] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.204805] ACPI: bus type pci registered
[ 0.204907] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.204910] PCI: not using MMCONFIG
[ 0.205140] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 0.205142] PCI: Using configuration type 1 for base access
[ 0.206960] bio: create slab <bio-0> at 0
[ 0.206960] ACPI: Deleted _OSI(Windows 2009)
[ 0.206960] ACPI: Added _OSI(Linux)
[ 0.209165] ACPI: EC: EC description table is found, configuring boot EC
[ 0.209171] ACPI: EC: Look up EC in DSDT
[ 0.217833] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.220732] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline
[ 0.230153] ACPI Warning: Incorrect checksum in table [ATKG] - 0x84, should be 0xE5 (20110413/tbutils-314)
[ 0.230498] ACPI: SSDT 7dd993b0 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.231047] ACPI: Dynamic OEM Table Load:
[ 0.231051] ACPI: SSDT (null) 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.231349] ACPI: SSDT 7dd99320 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.231897] ACPI: Dynamic OEM Table Load:
[ 0.231901] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.232261] ACPI: Interpreter enabled
[ 0.232274] ACPI: (supports S0 S3 S4 S5)
[ 0.232302] ACPI: Using IOAPIC for interrupt routing
[ 0.232334] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.234058] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.234061] PCI: Using MMCONFIG for extended config space
[ 0.243238] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 0.243608] ACPI: No dock devices found.
[ 0.243611] HEST: Table not found.
[ 0.243616] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.243913] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.244130] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.244134] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.244137] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.244140] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.244143] pci_root PNP0A08:00: host bridge window [mem 0x7de00000-0xffffffff]
[ 0.244159] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.244186] DMAR: Forcing write-buffer flush capability
[ 0.244212] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[ 0.244228] pci 0000:00:02.0: reg 10: [mem 0xfe400000-0xfe7fffff 64bit]
[ 0.244238] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.244246] pci 0000:00:02.0: reg 20: [io 0xdc00-0xdc07]
[ 0.244283] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[ 0.244297] pci 0000:00:02.1: reg 10: [mem 0xfe800000-0xfe8fffff 64bit]
[ 0.244395] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.244464] pci 0000:00:1a.0: reg 20: [io 0xd880-0xd89f]
[ 0.244532] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.244601] pci 0000:00:1a.1: reg 20: [io 0xd800-0xd81f]
[ 0.244670] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 0.244739] pci 0000:00:1a.2: reg 20: [io 0xd480-0xd49f]
[ 0.244820] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.244851] pci 0000:00:1a.7: reg 10: [mem 0xfe9fbc00-0xfe9fbfff]
[ 0.244958] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.244964] pci 0000:00:1a.7: PME# disabled
[ 0.244998] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.245024] pci 0000:00:1b.0: reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.245116] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.245122] pci 0000:00:1b.0: PME# disabled
[ 0.245154] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.245247] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.245252] pci 0000:00:1c.0: PME# disabled
[ 0.245287] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[ 0.245380] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.245386] pci 0000:00:1c.1: PME# disabled
[ 0.245425] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
[ 0.245519] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.245524] pci 0000:00:1c.5: PME# disabled
[ 0.245562] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.245631] pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f]
[ 0.245701] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.245770] pci 0000:00:1d.1: reg 20: [io 0xd080-0xd09f]
[ 0.245838] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.245907] pci 0000:00:1d.2: reg 20: [io 0xd000-0xd01f]
[ 0.245989] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.246019] pci 0000:00:1d.7: reg 10: [mem 0xfe9fb800-0xfe9fbbff]
[ 0.246125] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.246131] pci 0000:00:1d.7: PME# disabled
[ 0.246159] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.246251] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
[ 0.246413] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.246445] pci 0000:00:1f.2: reg 10: [io 0xcc00-0xcc07]
[ 0.246458] pci 0000:00:1f.2: reg 14: [io 0xc880-0xc883]
[ 0.246471] pci 0000:00:1f.2: reg 18: [io 0xc800-0xc807]
[ 0.246485] pci 0000:00:1f.2: reg 1c: [io 0xc480-0xc483]
[ 0.246498] pci 0000:00:1f.2: reg 20: [io 0xc400-0xc41f]
[ 0.246512] pci 0000:00:1f.2: reg 24: [mem 0xfe9fb000-0xfe9fb7ff]
[ 0.246569] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.246575] pci 0000:00:1f.2: PME# disabled
[ 0.246673] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.246679] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.246686] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.246695] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.246786] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
[ 0.246820] pci 0000:02:00.0: reg 10: [mem 0xfeaf0000-0xfeafffff 64bit]
[ 0.246941] pci 0000:02:00.0: supports D1
[ 0.246944] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.246951] pci 0000:02:00.0: PME# disabled
[ 0.246997] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.247003] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.247009] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.247018] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.247111] pci 0000:03:00.0: [1969:1026] type 0 class 0x000200
[ 0.247145] pci 0000:03:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
[ 0.247163] pci 0000:03:00.0: reg 18: [io 0xec00-0xec7f]
[ 0.247272] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.247279] pci 0000:03:00.0: PME# disabled
[ 0.247317] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
[ 0.247322] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.247328] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.247338] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.247437] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.247443] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.247449] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.247458] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.247461] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.247465] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.247468] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.247471] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.247474] pci 0000:00:1e.0: bridge window [mem 0x7de00000-0xffffffff] (subtractive decode)
[ 0.247504] pci_bus 0000:00: on NUMA node 0
[ 0.247508] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.247720] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.247764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.247955] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.248244] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.259263] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[ 0.259321] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
[ 0.259380] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[ 0.259432] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
[ 0.259486] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
[ 0.259541] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
[ 0.259595] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
[ 0.259650] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
[ 0.259762] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.259776] vgaarb: loaded
[ 0.259778] vgaarb: bridge control possible 0000:00:02.0
[ 0.259889] PCI: Using ACPI for IRQ routing
[ 0.259892] PCI: pci_cache_line_size set to 64 bytes
[ 0.260000] reserve RAM buffer: 0000000000097c00 - 000000000009ffff
[ 0.260003] reserve RAM buffer: 000000007dd80000 - 000000007fffffff
[ 0.260139] NetLabel: Initializing
[ 0.260142] NetLabel: domain hash size = 128
[ 0.260143] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.260158] NetLabel: unlabeled traffic allowed by default
[ 0.260175] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.260182] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.260188] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.270002] Switching to clocksource hpet
[ 0.273159] Switched to NOHz mode on CPU #0
[ 0.273289] Switched to NOHz mode on CPU #1
[ 0.277809] pnp: PnP ACPI init
[ 0.277833] ACPI: bus type pnp registered
[ 0.277988] pnp 00:00: [bus 00-ff]
[ 0.277992] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.277995] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.278000] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.278003] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.278006] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.278009] pnp 00:00: [mem 0x7de00000-0xffffffff window]
[ 0.278012] pnp 00:00: [mem 0x00000000-0xffffffff window]
[ 0.278117] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.278129] pnp 00:01: [mem 0xfed10000-0xfed19fff]
[ 0.278191] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.278196] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.278231] pnp 00:02: [dma 4]
[ 0.278234] pnp 00:02: [io 0x0000-0x000f]
[ 0.278236] pnp 00:02: [io 0x0081-0x0083]
[ 0.278239] pnp 00:02: [io 0x0087]
[ 0.278241] pnp 00:02: [io 0x0089-0x008b]
[ 0.278243] pnp 00:02: [io 0x008f]
[ 0.278246] pnp 00:02: [io 0x00c0-0x00df]
[ 0.278277] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.278290] pnp 00:03: [io 0x0070-0x0071]
[ 0.278304] pnp 00:03: [irq 8]
[ 0.278335] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.278373] pnp 00:04: [io 0x0060]
[ 0.278376] pnp 00:04: [io 0x0064]
[ 0.278382] pnp 00:04: [irq 1]
[ 0.278416] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.278471] pnp 00:05: [irq 12]
[ 0.278509] pnp 00:05: Plug and Play ACPI device, IDs ETD0001 PNP0f0e PNP0f0b PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.278520] pnp 00:06: [io 0x0061]
[ 0.278552] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.278563] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.278568] pnp 00:07: [irq 13]
[ 0.278601] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.278762] pnp 00:08: [io 0x0010-0x001f]
[ 0.278765] pnp 00:08: [io 0x0022-0x003f]
[ 0.278767] pnp 00:08: [io 0x0044-0x005f]
[ 0.278769] pnp 00:08: [io 0x0063]
[ 0.278772] pnp 00:08: [io 0x0065]
[ 0.278774] pnp 00:08: [io 0x0067-0x006f]
[ 0.278776] pnp 00:08: [io 0x0072-0x007f]
[ 0.278778] pnp 00:08: [io 0x0080]
[ 0.278781] pnp 00:08: [io 0x0084-0x0086]
[ 0.278783] pnp 00:08: [io 0x0088]
[ 0.278785] pnp 00:08: [io 0x008c-0x008e]
[ 0.278787] pnp 00:08: [io 0x0090-0x009f]
[ 0.278790] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.278792] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.278794] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.278797] pnp 00:08: [io 0x0800-0x087f]
[ 0.278799] pnp 00:08: [io 0x0400-0x041f]
[ 0.278801] pnp 00:08: [io 0x0500-0x057f]
[ 0.278804] pnp 00:08: [mem 0xfe9fac00-0xfe9facff window]
[ 0.278807] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.278809] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[ 0.278812] pnp 00:08: [mem 0xfed45000-0xfed89fff]
[ 0.278815] pnp 00:08: [mem 0xfed90000-0xfed90fff]
[ 0.278817] pnp 00:08: [mem 0xfed91000-0xfed91fff]
[ 0.278820] pnp 00:08: [mem 0xfed92000-0xfed92fff]
[ 0.278822] pnp 00:08: [mem 0xfed93000-0xfed93fff]
[ 0.278825] pnp 00:08: [mem 0xffb00000-0xffbfffff]
[ 0.278827] pnp 00:08: [mem 0xfff00000-0xffffffff]
[ 0.278906] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.278910] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.278913] system 00:08: [io 0x0400-0x041f] has been reserved
[ 0.278916] system 00:08: [io 0x0500-0x057f] has been reserved
[ 0.278920] system 00:08: [mem 0xfe9fac00-0xfe9facff window] has been reserved
[ 0.278924] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.278927] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.278931] system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
[ 0.278934] system 00:08: [mem 0xfed90000-0xfed90fff] has been reserved
[ 0.278938] system 00:08: [mem 0xfed91000-0xfed91fff] has been reserved
[ 0.278941] system 00:08: [mem 0xfed92000-0xfed92fff] has been reserved
[ 0.278944] system 00:08: [mem 0xfed93000-0xfed93fff] has been reserved
[ 0.278948] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.278951] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.278955] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279024] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.279059] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.279120] pnp 00:0a: [mem 0xffa00000-0xffbfffff]
[ 0.279123] pnp 00:0a: [mem 0xffe00000-0xffffffff]
[ 0.279177] system 00:0a: [mem 0xffa00000-0xffbfffff] could not be reserved
[ 0.279181] system 00:0a: [mem 0xffe00000-0xffffffff] could not be reserved
[ 0.279185] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279233] pnp 00:0b: [mem 0xffc00000-0xffdfffff]
[ 0.279287] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.279291] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279352] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.279355] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 0.279358] pnp 00:0c: [mem 0xfec10000-0xfec17fff]
[ 0.279360] pnp 00:0c: [mem 0xfec18000-0xfec1ffff]
[ 0.279362] pnp 00:0c: [mem 0xfec38000-0xfec3ffff]
[ 0.279365] pnp 00:0c: [io 0x0250-0x0253]
[ 0.279367] pnp 00:0c: [io 0x0256-0x025f]
[ 0.279424] system 00:0c: [io 0x0250-0x0253] has been reserved
[ 0.279428] system 00:0c: [io 0x0256-0x025f] has been reserved
[ 0.279431] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.279435] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.279438] system 00:0c: [mem 0xfec10000-0xfec17fff] has been reserved
[ 0.279441] system 00:0c: [mem 0xfec18000-0xfec1ffff] has been reserved
[ 0.279445] system 00:0c: [mem 0xfec38000-0xfec3ffff] has been reserved
[ 0.279449] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279527] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[ 0.279583] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.279587] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279900] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.279903] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[ 0.279911] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[ 0.279913] pnp 00:0e: [mem 0x00100000-0x7ddfffff]
[ 0.279916] pnp 00:0e: [mem 0x00000000-0xffffffff disabled]
[ 0.280024] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.280028] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.280031] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.280035] system 00:0e: [mem 0x00100000-0x7ddfffff] could not be reserved
[ 0.280039] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.280204] pnp: PnP ACPI: found 15 devices
[ 0.280206] ACPI: ACPI bus type pnp unregistered
[ 0.316904] PCI: max bus depth: 1 pci_try_num: 2
[ 0.316957] pci 0000:00:1c.5: BAR 15: assigned [mem 0x7de00000-0x7dffffff 64bit pref]
[ 0.316960] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.316963] pci 0000:00:1c.0: bridge window [io disabled]
[ 0.316970] pci 0000:00:1c.0: bridge window [mem disabled]
[ 0.316975] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 0.316984] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.316987] pci 0000:00:1c.1: bridge window [io disabled]
[ 0.316994] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.316999] pci 0000:00:1c.1: bridge window [mem pref disabled]
[ 0.317008] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
[ 0.317013] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.317020] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.317026] pci 0000:00:1c.5: bridge window [mem 0x7de00000-0x7dffffff 64bit pref]
[ 0.317035] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.317037] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.317044] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.317049] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.317072] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.317078] pci 0000:00:1c.0: setting latency timer to 64
[ 0.317089] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.317095] pci 0000:00:1c.1: setting latency timer to 64
[ 0.317104] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.317110] pci 0000:00:1c.5: setting latency timer to 64
[ 0.317120] pci 0000:00:1e.0: setting latency timer to 64
[ 0.317125] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.317128] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.317131] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.317134] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.317137] pci_bus 0000:00: resource 8 [mem 0x7de00000-0xffffffff]
[ 0.317140] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.317143] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.317146] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.317149] pci_bus 0000:03: resource 2 [mem 0x7de00000-0x7dffffff 64bit pref]
[ 0.317152] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.317155] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.317158] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.317161] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.317164] pci_bus 0000:04: resource 8 [mem 0x7de00000-0xffffffff]
[ 0.317212] NET: Registered protocol family 2
[ 0.317288] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.317539] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.318008] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.318301] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.318305] TCP reno registered
[ 0.318308] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.318322] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.318498] NET: Registered protocol family 1
[ 0.318522] pci 0000:00:02.0: Boot video device
[ 0.318709] PCI: CLS 32 bytes, default 64
[ 0.318774] Unpacking initramfs...
[ 0.362528] Freeing initrd memory: 2140k freed
[ 0.363598] Simple Boot Flag at 0x51 set to 0x1
[ 0.363905] apm: BIOS not found.
[ 0.364096] audit: initializing netlink socket (disabled)
[ 0.364111] type=2000 audit(1313836027.363:1): initialized
[ 0.368355] highmem bounce pool size: 64 pages
[ 0.368361] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.378275] VFS: Disk quotas dquot_6.5.2
[ 0.378373] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.378504] msgmni has been set to 1713
[ 0.378738] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.378775] io scheduler noop registered
[ 0.378777] io scheduler deadline registered
[ 0.378792] io scheduler cfq registered (default)
[ 0.378941] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.379006] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.379125] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.379183] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.379298] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.379356] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.379515] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.379522] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.379547] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.379549] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.379555] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.379580] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.379583] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.379589] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.379727] intel_idle: MWAIT substates: 0x2220
[ 0.379730] intel_idle: does not run on family 6 model 23
[ 0.379738] ERST: Table is not found!
[ 0.379754] isapnp: Scanning for PnP cards...
[ 0.736731] isapnp: No Plug & Play device found
[ 0.736806] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.927363] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.930628] i8042: Detected active multiplexing controller, rev 1.1
[ 0.932354] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.932395] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.932429] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.932459] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.932493] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.932600] mousedev: PS/2 mouse device common for all mice
[ 0.932699] rtc_cmos 00:03: RTC can wake from S4
[ 0.932832] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.932865] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.932895] cpuidle: using governor ladder
[ 0.932898] cpuidle: using governor menu
[ 0.933182] TCP cubic registered
[ 0.933185] NET: Registered protocol family 17
[ 0.933193] Registering the dns_resolver key type
[ 0.933213] Using IPI No-Shortcut mode
[ 0.933308] PM: Hibernation image not present or could not be loaded.
[ 0.933316] registered taskstats version 1
[ 0.937616] rtc_cmos 00:03: setting system clock to 2011-08-20 10:27:08 UTC (1313836028)
[ 0.937671] Initializing network drop monitor service
[ 0.937764] Freeing unused kernel memory: 500k freed
[ 0.938004] Write protecting the kernel text: 3416k
[ 0.938031] Write protecting the kernel read-only data: 1036k
[ 0.958575] udevd[74]: starting version 173
[ 0.971150] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.052297] usbcore: registered new interface driver usbfs
[ 1.052328] usbcore: registered new interface driver hub
[ 1.056240] usbcore: registered new device driver usb
[ 1.060423] SCSI subsystem initialized
[ 1.062822] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.062863] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.062884] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.062889] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.062924] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.062959] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.067126] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.067155] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe9fbc00
[ 1.080274] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.080633] hub 1-0:1.0: USB hub found
[ 1.080639] hub 1-0:1.0: 6 ports detected
[ 1.080750] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.080771] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.080776] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.080787] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.080819] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.084716] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.084739] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9fb800
[ 1.086782] libata version 3.00 loaded.
[ 1.096691] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.096888] hub 2-0:1.0: USB hub found
[ 1.096894] hub 2-0:1.0: 6 ports detected
[ 1.097005] ahci 0000:00:1f.2: version 3.0
[ 1.097032] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.097094] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.097153] ahci: SSS flag set, parallel bus scan disabled
[ 1.097192] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 1.097197] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 1.097204] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.099088] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.103908] scsi0 : ahci
[ 1.104030] scsi1 : ahci
[ 1.104124] scsi2 : ahci
[ 1.104219] scsi3 : ahci
[ 1.104493] ata1: SATA max UDMA/133 abar m2048@0xfe9fb000 port 0xfe9fb100 irq 43
[ 1.104497] ata2: SATA max UDMA/133 abar m2048@0xfe9fb000 port 0xfe9fb180 irq 43
[ 1.104500] ata3: DUMMY
[ 1.104501] ata4: DUMMY
[ 1.104542] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.104555] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.104559] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.104576] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.104625] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
[ 1.104921] hub 3-0:1.0: USB hub found
[ 1.104927] hub 3-0:1.0: 2 ports detected
[ 1.105025] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.105034] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.105038] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.105048] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.105089] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
[ 1.105243] hub 4-0:1.0: USB hub found
[ 1.105248] hub 4-0:1.0: 2 ports detected
[ 1.105328] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.105336] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.105340] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.105349] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.105388] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d480
[ 1.105538] hub 5-0:1.0: USB hub found
[ 1.105543] hub 5-0:1.0: 2 ports detected
[ 1.105626] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.105634] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.105638] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.105647] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.105676] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 1.105828] hub 6-0:1.0: USB hub found
[ 1.105833] hub 6-0:1.0: 2 ports detected
[ 1.105914] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.105921] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.105926] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.105934] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.105963] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
[ 1.106116] hub 7-0:1.0: USB hub found
[ 1.106121] hub 7-0:1.0: 2 ports detected
[ 1.106203] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.106211] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.106215] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.106224] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.106253] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ 1.106408] hub 8-0:1.0: USB hub found
[ 1.106413] hub 8-0:1.0: 2 ports detected
[ 1.366690] Refined TSC clocksource calibration: 1795.499 MHz.
[ 1.366697] Switching to clocksource tsc
[ 1.386682] usb 1-3: new high speed USB device number 2 using ehci_hcd
[ 1.423360] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.425073] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.425392] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.425397] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.427263] ata1.00: ATA-8: ST9320325AS, 0002SDM1, max UDMA/133
[ 1.427267] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.429430] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.429742] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.429746] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.431607] ata1.00: configured for UDMA/133
[ 1.431764] scsi 0:0:0:0: Direct-Access ATA ST9320325AS 0002 PQ: 0 ANSI: 5
[ 1.750026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.765219] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.765224] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.778309] ata2.00: ATAPI: Optiarc DVD RW AD-7580S, FX20, max UDMA/100
[ 1.793923] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.793928] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.807011] ata2.00: configured for UDMA/100
[ 1.810324] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7580S FX20 PQ: 0 ANSI: 5
[ 1.817668] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.817728] sd 0:0:0:0: [sda] Write Protect is off
[ 1.817731] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.817756] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.825301] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.825305] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.825485] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.836686] usb 6-1: new low speed USB device number 2 using uhci_hcd
[ 1.861803] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 1.862267] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.022253] input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input1
[ 2.022356] generic-usb 0003:13EE:0003.0001: input,hidraw0: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 2.022380] usbcore: registered new interface driver usbhid
[ 2.022382] usbhid: USB HID core driver
[ 2.642474] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.437211] udevd[281]: starting version 173
[ 4.851372] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 4.851381] ACPI: Sleep Button [SLPB]
[ 4.851449] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 4.852249] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.852406] ACPI: AC Adapter [AC0] (on-line)
[ 4.854889] ACPI: Lid Switch [LID]
[ 4.854978] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.854985] ACPI: Power Button [PWRF]
[ 4.879738] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.879742] ACPI: Thermal Zone [THRM] (51 C)
[ 4.892685] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.892695] ACPI: Battery Slot [BAT0] (battery present)
[ 4.943993] iTCO_vendor_support: vendor-support=0
[ 4.976746] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 4.976864] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0860)
[ 4.977265] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.016082] ACPI: acpi_idle registered with cpuidle
[ 5.016624] Monitor-Mwait will be used to enter C-1 state
[ 5.016652] Monitor-Mwait will be used to enter C-2 state
[ 5.016695] Monitor-Mwait will be used to enter C-3 state
[ 5.016702] Marking TSC unstable due to TSC halts in idle
[ 5.016803] Switching to clocksource hpet
[ 5.020411] asus_acpi: Asus Laptop ACPI Extras version 0.30
[ 5.020567] asus_acpi: unsupported model K50IJ, trying default values
[ 5.020570] asus_acpi: send /proc/acpi/dsdt to the developers
[ 5.065420] ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.065435] ATL1E 0000:03:00.0: setting latency timer to 64
[ 5.075601] asus_laptop: Asus Laptop Support version 0.42
[ 5.075779] asus_laptop: K50IJ model detected
[ 5.077181] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5
[ 5.115443] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.115630] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 5.115665] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.134197] cfg80211: Calling CRDA to update world regulatory domain
[ 5.185330] Linux agpgart interface v0.103
[ 5.231178] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 5.231293] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 5.231873] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 5.232144] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 5.271428] psmouse serio4: ID: 10 00 64
[ 5.359481] elantech: assuming hardware version 2, firmware version 4.1.1
[ 5.369930] [drm] Initialized drm 1.1.0 20060810
[ 5.395345] elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[ 5.493880] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.494091] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.498240] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input6
[ 5.632384] Linux media interface: v0.10
[ 5.646817] Linux video capture interface: v2.00
[ 5.760045] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[ 5.782897] input: CNF7129 as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input7
[ 5.782987] usbcore: registered new interface driver uvcvideo
[ 5.782990] USB Video Class driver (v1.1.0)
[ 5.819052] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.819068] ath9k 0000:02:00.0: setting latency timer to 64
[ 5.822118] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.822124] i915 0000:00:02.0: setting latency timer to 64
[ 5.839042] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 5.839050] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.839052] [drm] Driver supports precise vblank timestamp query.
[ 5.839099] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.870218] ath: EEPROM regdomain: 0x60
[ 5.870220] ath: EEPROM indicates we should expect a direct regpair map
[ 5.870224] ath: Country alpha2 being used: 00
[ 5.870226] ath: Regpair used: 0x60
[ 5.915236] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 5.915623] Registered led device: ath9k-phy0
[ 5.915633] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8380000, irq=17
[ 6.447528] fbcon: inteldrmfb (fb0) is primary device
[ 6.489111] Console: switching to colour frame buffer device 170x48
[ 6.494288] fb0: inteldrmfb frame buffer device
[ 6.494290] drm: registered panic notifier
[ 6.494554] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 6.494634] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 6.494720] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.751245] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 8.031324] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.133131] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 8.191806] Adding 4213756k swap on /dev/sda5. Priority:-1 extents:1 across:4213756k
Last edited by Shark (2011-08-21 12:29:24)
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
Post the output of 'xset -q'.
'xset s off &' in my .xinitrc disables screen blanking. 'setterm -blank 0' in /etc/rc.local works in the console.
https://wiki.archlinux.org/index.php/DPMS
Last edited by karol (2011-08-21 12:15:48)
Offline
Hi
Here it is:
Keyboard Control:
auto repeat: on key click percent: 0 LED mask: 00000002
XKB indicators:
00: Caps Lock: off 01: Num Lock: on 02: Scroll Lock: off
03: Compose: off 04: Kana: off 05: Sleep: off
06: Suspend: off 07: Mute: off 08: Misc: off
09: Mail: off 10: Charging: off 11: Shift Lock: off
12: Group 2: off 13: Mouse Keys: off
auto repeat delay: 500 repeat rate: 20
auto repeating keys: 00ffffffdffffbbf
fadfffefffedffff
9fffffffffffffff
fff7ffffffffffff
bell percent: 50 bell pitch: 400 bell duration: 100
Pointer Control:
acceleration: 2/1 threshold: 4
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 600 cycle: 600
Colors:
default colormap: 0x20 BlackPixel: 0x0 WhitePixel: 0xffffff
Font Path:
/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,built-ins
DPMS (Energy Star):
Standby: 1200 Suspend: 1500 Off: 1800
DPMS is Enabled
Monitor is On
I will try your soulution with .xinitrc because when i type 'xset s off' in terminal nothing is changed. I will report.
Last edited by Shark (2011-08-21 12:19:05)
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
Your screensaver kicks in after 10 minutes.
Read https://wiki.archlinux.org/index.php/DPMS and post if you have any problems. You have to source the changed files (or e.g. relogin).
Edit: You mean the output of 'xset q' is the same after 'xset s off'? Weird, works here.
[karol@black test]$ xset s on
[karol@black test]$ xset q | grep -A2 "Screen Saver"
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 600 cycle: 600
[karol@black test]$ xset s off
[karol@black test]$ xset q | grep -A2 "Screen Saver"
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 0 cycle: 600
You may also want to disable dpms with 'xset -dpms'.
Last edited by karol (2011-08-21 12:24:01)
Offline
Your screensaver kicks in after 10 minutes.
Read https://wiki.archlinux.org/index.php/DPMS and post if you have any problems. You have to source the changed files (or e.g. relogin).Edit: You mean the output of 'xset q' is the same after 'xset s off'? Weird, works here.
[karol@black test]$ xset s on [karol@black test]$ xset q | grep -A2 "Screen Saver" Screen Saver: prefer blanking: yes allow exposures: yes timeout: 600 cycle: 600 [karol@black test]$ xset s off [karol@black test]$ xset q | grep -A2 "Screen Saver" Screen Saver: prefer blanking: yes allow exposures: yes timeout: 0 cycle: 600
You may also want to disable dpms with 'xset -dpms'.
Sorry for misunderstanding - actually it works. It is me for being too sloppy because i didn't check the numbers (600 or 0). I thought that the section "Prefer Blanking" should be "off" and didn't care for 600 or 0. Now when i do 'xset s off' i got 0.
thanks, problem solved.
Last edited by Shark (2011-08-21 12:36:30)
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
The only problem is that 'xset -dpms &' doesn't work in .xinitrc though other commans do (like xset s off). But when i am in session i can disable dpms in terminal. Weird.
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
Did you source .xinirtc after you made the change? Or maybe relogin.
I'm not using 'xset -dpms' so I don't know if it works this way.
Offline
Yes, i log out and relogin. I have even restart the computer.
xset -q:
Keyboard Control:
auto repeat: on key click percent: 0 LED mask: 00000000
XKB indicators:
00: Caps Lock: off 01: Num Lock: off 02: Scroll Lock: off
03: Compose: off 04: Kana: off 05: Sleep: off
06: Suspend: off 07: Mute: off 08: Misc: off
09: Mail: off 10: Charging: off 11: Shift Lock: off
12: Group 2: off 13: Mouse Keys: off
auto repeat delay: 500 repeat rate: 20
auto repeating keys: 00ffffffdffffbbf
fadfffefffedffff
9fffffffffffffff
fff7ffffffffffff
bell percent: 50 bell pitch: 400 bell duration: 100
Pointer Control:
acceleration: 2/1 threshold: 4
Screen Saver:
prefer blanking: no allow exposures: yes
timeout: 0 cycle: 600
Colors:
default colormap: 0x20 BlackPixel: 0x0 WhitePixel: 0xffffff
Font Path:
/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,built-ins
DPMS (Energy Star):
Standby: 0 Suspend: 0 Off: 0
DPMS is Enabled
Monitor is On
Actually, standby is 0, so is suspend, but whay does it write: "DPMS is Enabled"
EDIT:
Then, if i do in terminal 'xset -dpms' then it writes "DPMS is Disabled"
Last edited by Shark (2011-08-21 13:06:07)
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
Post your .xinirtrc. 'xset -dpms; xset s off' should work.
Offline
.xinitrc:
#
# ~/.xinitrc
#
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
##################NASTAVITVE ZA EKRAN XORG######################
##IZKLOP IZ 600 NA0
xset s off &
##IZKLOP PREFER BLANKING
xset s noblank &
##IZKLOP POWER MANAGERJA
xset -dpms &
###############################################################
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
#exec ck-launch-session dbus-launch --exit-with-session startxfce4
exec ck-launch-session startxfce4
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
I use something like this to get that pesky blanking to stop... I know it's overkill, but I found this issue quite frustrating:
xset s noblank
xset s noexpose
xset s 0 0
xset s off
xset dpms 0 0 0
xset -dpms
On some rare occasions, these settings actually revert themselves and I'll have to run those commands again. I have no idea why it happens. (I don't have any power management tools running, no DE, and no xscreensaver.)
Education is favorable to liberty. Freedom can exist only in a society of knowledge. Without learning, men are incapable of knowing their rights, and where learning is confined to a few people, liberty can be neither equal nor universal.
Tu ne cede malis sed contra audentior ito
Offline
I found the solution. The problem is that somewhere in the process of starting .xinitrc 'xset -dpms' command is overwriten. So, to get a working command you have to put in .xinitrc:
sleep 10s && xset -dpms &
Maybe is 10 seconds too much but i didn't try other values. It is also important to add '&' at the end of the command or else it won't work becaust it will be overwritten.
Last edited by Shark (2011-08-21 14:29:51)
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
I found the solution. The problem is that somewhere in the process of starting .xinitrc 'xset -dpms' command is overwriten. So, to get a working command you have to put in .xinitrc:
sleep 10s && xset -dpms &
Maybe is 10 seconds too much but i didn't try other values. It is also important to add '&' at the end of the command or else it won't work becaust it will be overwritten.
According to the wiki, one second should be enough
https://wiki.archlinux.org/index.php/DP … using_xset
Offline
Pages: 1