Archey

toad · 2011-01-30 11:06:53

Good point, Zom.

But am busy at the mo trying to convince nouveau/nividia to play with my nvidia card so this is far down the list. Thanks for explanation

toad · 2011-02-11 19:00:29

This thread is so long and I confess to not having read it all, but...

archey3 does not display cpu temperature on my T61 - it does on my desktop. Both systems have lm_sensors installed - any ideas what I'm missing?

Zom · 2011-02-11 19:49:58

toad wrote:

This thread is so long and I confess to not having read it all, but...
archey3 does not display cpu temperature on my T61 - it does on my desktop. Both systems have lm_sensors installed - any ideas what I'm missing?

The correct modules for your hardware? Have you configured lm_sensors correctly?

toad · 2011-02-11 23:13:58

Temperature widgets work fine and output of sensors is as follows:

toad@archtop 404\2 ~ > sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:       +42.0°C  (crit = +127.0°C)                  
temp2:       +33.0°C  (crit = +100.0°C)                  

thinkpad-isa-0000
Adapter: ISA adapter
fan1:       3006 RPM
temp1:       +42.0°C                                    
temp2:       +41.0°C                                    
temp3:       +29.0°C                                    
temp4:           N/A                                    
temp5:       +31.0°C                                    
temp6:           N/A                                    
temp7:       +29.0°C                                    
temp8:           N/A                                    
temp9:       +39.0°C                                    
temp10:      +41.0°C                                    
temp11:      +37.0°C                                    
temp12:          N/A                                    
temp13:          N/A                                    
temp14:          N/A                                    
temp15:          N/A                                    
temp16:          N/A

Not sure about the virtual device, though.

graysky · 2011-03-27 11:36:22

Is there an option to control the position of the output? For example, centered top-to-bottom?

Example from archey:

               +                
               #                
              ###               
             #####              
             ######             
            ; #####;            
           +##.#####            Hostname: reborn
          +##########           Distro: Arch Linux
         #############;         Kernel: 2.6.38-ck
        ###############+        Uptime: 1 day, 11:40
       #######   #######        Window Manager: Openbox
     .######;     ;###;`".      Desktop Environment: LXDE
    .#######;     ;#####.       Shell: /bin/bash
    #########.   .########`     Terminal: xterm
   ######'           '######    Packages: 557
  ;####                 ####;   CPU: AMD Athlon(TM) XP 2100+
  ##'                     '##   RAM: 174 MB / 499 MB 
 #'                         `#  Disk: 347G / 458G

655321 · 2011-04-11 08:13:01

AWESOME, I always watched screenshots with terminal looking that cool and now I know where do people get it, and its thanks to you keep it up. One question though, why isnt this on arch repos still? how many votes does it need to be included in official repos?

Also, whats the difference between your script and the python3 one? just python version?

thanks a lot

nixfag · 2011-06-01 18:41:10

Anyone wants to add another detail which shows your system age?
example of a shell script:
echo $(($(($(date +%s) - $(date -d "$(head -1 /var/log/pacman.log | cut -d ' ' -f 1,2 | tr -d '[]')" +%s))) / 86400)) days

Last edited by nixfag (2011-06-01 18:42:23)

graysky · 2011-06-01 19:03:33

@nixfag - is pacman.log immortal? For example, I know my system is older than what your line is giving...

Blue Peppers · 2011-06-07 00:03:12

I've just pushed Archey3 0.3 to master, take a look at it. I've also put up a couple of web pages with some examples of the new config system and the different results you can get out of it.

@toad, the sensors class in archey3 is a bit of a sham, as I really didn't have anything to test it on apart from my own computer, which has very few sensors. Parsing is incredibly hit and miss. I'll look into it.

Last edited by Blue Peppers (2011-06-07 00:04:57)

graysky · 2011-06-07 00:31:03

@BP - nice, but can it work without the dep of python-logbook-git?

Blue Peppers · 2011-06-07 00:52:48

Done, though if anything goes wrong, logbook will be required for debugging.

graysky · 2011-06-07 01:03:17

THanks - fails to build for me. Error posted on AUR page.

Blue Peppers · 2011-06-07 01:16:24

Third time lucky (hopefully). Added python-distribute to the build-depends.

Aakko · 2011-07-02 09:23:23

Just noticed that Archey reports Xfce 4.8 as 4.6.

defcon · 2011-08-25 19:07:47

Hm... archey didn't recognize my openbox o_O
It says:

WM: none
DE: none

melik · 2011-09-07 15:37:38

Hey guys, I know I have been inactive and I should have posted this earlier; but I no longer develop archey, I just do not have the time. I believe the archey3 fork by bluepeppers is still active so look into that.

If anyone would like to continue archey development, shoot me a message or email.

Sector11 · 2011-09-07 16:05:22

melik wrote:

Hey guys, I know I have been inactive and I should have posted this earlier; but I no longer develop archey, I just do not have the time. I believe the archey3 fork by bluepeppers is still active so look into that.
If anyone would like to continue archey development, shoot me a message or email.

Bad news. However, thank you for getting it going, I have an older version as I can't find newer .deb's but I'd like to wish you well with what you are doing.

Live long and prosper!

  13:03:25 ~
         $ archey
                                  User: sector11
          _sudZUZ#Z#XZo=_         Hostname: sector11
       _jmZZ2!!~---~!!X##wx       OS: Debian 6.0.2 x86_64
    .<wdP~~            -!YZL,     Kernel: 2.6.32-5-amd64
   .mX2'       _xaaa__     XZ[.   Uptime: 2:50
   oZ[      _jdXY!~?S#wa   ]Xb;   Window Manager: Openbox
  _#e'     .]X2(     ~Xw|  )XXc   Shell: Bash
 .2Z`      ]X[.       xY|  ]oZ(   Terminal: Xterm
 .2#;      )3k;     _s!~   jXf`   Packages: 1384
  1Z>      -]Xb/    ~    __#2(    CPU: AMD Athlon(tm) 64 Processor 3500+
  -Zo;       +!4ZwerfgnZZXY'      RAM: 395 MB / 2012 MB
   *#[,        ~-?!!!!!!-~        Disk: 38G / 228G
    XUb;.                         
     )YXL,,                       
       +3#bc,                     
         -)SSL,,                  
            ~~~~~           
 
  13:03:38 ~
         $

pyarch · 2011-11-06 06:06:48

getting

Traceback (most recent call last):
  File "./archey", line 95, in <module>
    '--no-headers')), encoding='utf8').rstrip('\n').split('\n')
TypeError: str() takes at most 1 argument (2 given)

error

Jabrick · 2011-11-06 06:19:32

pyarch wrote:

getting

Traceback (most recent call last):
  File "./archey", line 95, in <module>
    '--no-headers')), encoding='utf8').rstrip('\n').split('\n')
TypeError: str() takes at most 1 argument (2 given)

error

I'm getting the exact same error

FIX:
To fix it edit /usr/bin/archey
And modify line 95 to look like

'--no-headers'))).rstrip('\n').split('\n')

Basically delete ", encoding='utf8'
(I think thats the second arguement that shouldn't be there)

Last edited by Jabrick (2011-11-09 01:46:40)

kemmotar · 2012-01-22 11:59:38

Hi!
How can I contribute to this project?

Kaurin · 2012-04-06 13:42:05

Hey i have long CPU name. How can i fix this?
http://imgur.com/yu8pN

ancleessen4 · 2012-04-16 19:37:41

@Kaurin
this might help;
http://bbs.archbang.org/viewtopic.php?id=18

goran'agar · 2012-07-17 13:50:29

Archey is not compatible with the ZFS filesystem.

ZFS is not listed as a filesystem type and if I add it it will treat every dataset as a single filesystem. So, for example, if I have:

Dataset:                                            Mountpoint:
rpool/ROOT                                          /
rpool/HOME                                          /home
rpool/HOME/user                                     /home/user
rpool/HOME/someotheruser                            /home/someotheruser

all within the same pool of, let's say, 200GB, Archey will incorrectly count four times the available and the used space, as if the total amount or space available for that pool were 800GB.

moog · 2012-08-22 17:54:28

Hi, at start archey , I wrote No such file or directory

lordmetroid · 2012-12-28 07:22:28

Seems like Archey has become broken:

[lordmetroid@localhost ~]$ archey 
  File "/usr/bin/archey", line 116
    print 'Taking shot in',
                         ^
SyntaxError: invalid syntax

Last edited by lordmetroid (2012-12-28 07:23:46)

Arch Linux

#176 2011-01-30 11:06:53

Re: Archey

#177 2011-02-11 19:00:29

Re: Archey

#178 2011-02-11 19:49:58

Re: Archey

#179 2011-02-11 23:13:58

Re: Archey

#180 2011-03-27 11:36:22

Re: Archey

#181 2011-04-11 08:13:01

Re: Archey

#182 2011-06-01 18:41:10

Re: Archey

#183 2011-06-01 19:03:33

Re: Archey

#184 2011-06-07 00:03:12

Re: Archey

#185 2011-06-07 00:31:03

Re: Archey

#186 2011-06-07 00:52:48

Re: Archey

#187 2011-06-07 01:03:17

Re: Archey

#188 2011-06-07 01:16:24

Re: Archey

#189 2011-07-02 09:23:23

Re: Archey

#190 2011-08-25 19:07:47

Re: Archey

#191 2011-09-07 15:37:38

Re: Archey

#192 2011-09-07 16:05:22

Re: Archey

#193 2011-11-06 06:06:48

Re: Archey

#194 2011-11-06 06:19:32

Re: Archey

#195 2012-01-22 11:59:38

Re: Archey

#196 2012-04-06 13:42:05

Re: Archey

#197 2012-04-16 19:37:41

Re: Archey

#198 2012-07-17 13:50:29

Re: Archey

#199 2012-08-22 17:54:28

Re: Archey

#200 2012-12-28 07:22:28

Re: Archey

Board footer