You are not logged in.

Pages: 1 2

#1 2012-06-04 19:16:52

nu11_p01n73R
Member
Registered: 2012-06-04
Posts: 22

Gnome 3.4 installation

Hi...
I am new to arch. I tried installing gnome3.4 everything works fine but the gnome does not look like the one i have on my fedora 17 sad The menu bar contains applications and not activity my windows does not have a close button..no title bar ...no mouse pointers etc
what extra packages should be installed to gnome make look like "real" gnome 3.4

Thank you

Offline

#2 2012-06-04 19:17:59

Inxsible
Forum Fellow
From: Chicago
Registered: 2008-06-09
Posts: 9,183

Re: Gnome 3.4 installation

that's cause you are using the fallback mode. Search the forums to see how to fix it. One possibility could be your display drivers

Forum Rules

There's no such thing as a stupid question, but there sure are a lot of inquisitive idiots !

Offline

#3 2012-06-04 19:30:51

nu11_p01n73R
Member
Registered: 2012-06-04
Posts: 22

Re: Gnome 3.4 installation

I have a nvidia as well as an intel onboard graphic chipset of which both the drivers are installed.....
how can the fallback be fixed ....where should i start

Offline

#4 2012-06-04 19:32:06

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,941
Website

Re: Gnome 3.4 installation

nu11_p01n73R wrote:

I have a nvidia as well as an intel onboard graphic chipset of which both the drivers are installed.....

i found this information a bit confusing, since I know that this thing is not not possible.

Give what you have. To someone, it may be better than you dare to think.

Offline

#5 2012-06-04 19:32:58

Inxsible
Forum Fellow
From: Chicago
Registered: 2008-06-09
Posts: 9,183

Re: Gnome 3.4 installation

nu11_po1n73R wrote:

how can the fallback be fixed ....where should i start

As I mentioned in my earlier post

Inxsible wrote:

Search the forums to see how to fix it.

Forum Rules

There's no such thing as a stupid question, but there sure are a lot of inquisitive idiots !

Offline

#6 2012-06-04 19:35:08

Pres
Member
Registered: 2011-09-12
Posts: 423

Re: Gnome 3.4 installation

wonder wrote:

i found this information a bit confusing, since I know that this thing is not not possible.

He could be talking about Bumblebee, but I doubt this is the case.

Offline

#7 2012-06-04 19:40:33

nu11_p01n73R
Member
Registered: 2012-06-04
Posts: 22

Re: Gnome 3.4 installation

what i mean was i have an nvidia 420m series grahpics card and on integrated graphics controller
sorry on that smile

Offline

#8 2012-06-04 19:50:06

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,941
Website

Re: Gnome 3.4 installation

nu11_p01n73R wrote:

what i mean was i have an nvidia 420m series grahpics card and on integrated graphics controller
sorry on that smile

well, i meant the drivers. you should start providing some useful stuff that we can work on. right now you didn't provide us anything.

Give what you have. To someone, it may be better than you dare to think.

Offline

#9 2012-06-04 20:00:20

nu11_p01n73R
Member
Registered: 2012-06-04
Posts: 22

Re: Gnome 3.4 installation

I have installed the following drivers
xf86-video-nouveau
xf86-video-intel


as Inxsible suggested I am having a fallback version of the gnome

Offline

#10 2012-06-04 20:12:53

Pres
Member
Registered: 2011-09-12
Posts: 423

Re: Gnome 3.4 installation

Uninstall nouveau and try again. If you want to utilize the Nvidia card (after you get Gnome working properly), look into this:
https://wiki.archlinux.org/index.php/Bumblebee

Edit: Also read this topic. For this specific issue, your Xorg.0.log (and any other information on your setup that you feel is relevant) would give us a better idea of what your X server is doing.

Last edited by Pres (2012-06-04 20:17:15)

Offline

#11 2012-06-04 20:15:46

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,941
Website

Re: Gnome 3.4 installation

nu11_p01n73R wrote:

I have installed the following drivers
xf86-video-nouveau
xf86-video-intel


as Inxsible suggested I am having a fallback version of the gnome

this you didn't  provide any useful information. Hell us to help you.

hint: /var/log/Xorg.0.log
hint: glxinfo | grep -i opengl
hint: login method.

Give what you have. To someone, it may be better than you dare to think.

Offline

#12 2012-06-04 20:26:18

nu11_p01n73R
Member
Registered: 2012-06-04
Posts: 22

Re: Gnome 3.4 installation

/var/log/Xorg.0.log

[    37.856] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at [url]http://bugs.freedesktop.org/[/url].
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See [url]http://wiki.x.org/wiki/GitPage[/url] for git access instructions.
[    37.856] 
X.Org X Server 1.12.1.902 (1.12.2 RC 2)
Release Date: 2012-05-19
[    37.856] X Protocol Version 11, Revision 0
[    37.856] Build Operating System: Linux 3.3.6-1-ARCH x86_64 
[    37.856] Current Operating System: Linux myhost 3.3.6-1-ARCH #1 SMP PREEMPT Sun May 13 10:52:32 CEST 2012 x86_64
[    37.856] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda3 ro
[    37.856] Build Date: 20 May 2012  07:44:29AM
[    37.856]  
[    37.856] Current version of pixman: 0.24.4
[    37.856] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[    37.856] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    37.856] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun  5 07:17:13 2012
[    37.875] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    37.888] (==) No Layout section.  Using the first Screen section.
[    37.888] (==) No screen section available. Using defaults.
[    37.888] (**) |-->Screen "Default Screen Section" (0)
[    37.888] (**) |   |-->Monitor "<default monitor>"
[    37.888] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    37.888] (==) Automatically adding devices
[    37.888] (==) Automatically enabling devices
[    37.890] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[    37.890] 	Entry deleted from font path.
[    37.890] 	(Run 'mkfontdir' on "/usr/share/fonts/misc/").
[    37.926] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF/".
[    37.926] 	Entry deleted from font path.
[    37.926] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF/").
[    37.926] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    37.926] 	Entry deleted from font path.
[    37.926] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    37.926] 	Entry deleted from font path.
[    37.927] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    37.927] 	Entry deleted from font path.
[    37.927] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    37.927] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    37.927] 	Entry deleted from font path.
[    37.927] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    37.927] (==) FontPath set to:
	
[    37.927] (==) ModulePath set to "/usr/lib/xorg/modules"
[    37.927] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    37.927] (II) Loader magic: 0x7c8ae0
[    37.927] (II) Module ABI versions:
[    37.927] 	X.Org ANSI C Emulation: 0.4
[    37.927] 	X.Org Video Driver: 12.0
[    37.927] 	X.Org XInput driver : 16.0
[    37.927] 	X.Org Server Extension : 6.0
[    37.929] (--) PCI:*(0:0:2:0) 8086:0046:1028:0468 rev 24, Mem @ 0xfa400000/4194304, 0xb0000000/268435456, I/O @ 0x0000f080/8
[    37.929] (--) PCI: (0:1:0:0) 10de:0df1:1028:0468 rev 161, Mem @ 0xf9000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    37.929] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    37.929] (II) LoadModule: "extmod"
[    37.975] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    37.987] (II) Module extmod: vendor="X.Org Foundation"
[    37.987] 	compiled for 1.12.1.902, module version = 1.0.0
[    37.987] 	Module class: X.Org Server Extension
[    37.987] 	ABI class: X.Org Server Extension, version 6.0
[    37.987] (II) Loading extension MIT-SCREEN-SAVER
[    37.987] (II) Loading extension XFree86-VidModeExtension
[    37.987] (II) Loading extension XFree86-DGA
[    37.987] (II) Loading extension DPMS
[    37.987] (II) Loading extension XVideo
[    37.987] (II) Loading extension XVideo-MotionCompensation
[    37.987] (II) Loading extension X-Resource
[    37.987] (II) LoadModule: "dbe"
[    37.987] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    37.991] (II) Module dbe: vendor="X.Org Foundation"
[    37.991] 	compiled for 1.12.1.902, module version = 1.0.0
[    37.991] 	Module class: X.Org Server Extension
[    37.991] 	ABI class: X.Org Server Extension, version 6.0
[    37.991] (II) Loading extension DOUBLE-BUFFER
[    37.991] (II) LoadModule: "glx"
[    37.991] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    37.995] (II) Module glx: vendor="X.Org Foundation"
[    37.995] 	compiled for 1.12.1.902, module version = 1.0.0
[    37.995] 	ABI class: X.Org Server Extension, version 6.0
[    37.995] (==) AIGLX enabled
[    37.996] (II) Loading extension GLX
[    37.996] (II) LoadModule: "record"
[    37.996] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    37.997] (II) Module record: vendor="X.Org Foundation"
[    37.997] 	compiled for 1.12.1.902, module version = 1.13.0
[    37.997] 	Module class: X.Org Server Extension
[    37.997] 	ABI class: X.Org Server Extension, version 6.0
[    37.997] (II) Loading extension RECORD
[    37.997] (II) LoadModule: "dri"
[    37.997] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    38.010] (II) Module dri: vendor="X.Org Foundation"
[    38.010] 	compiled for 1.12.1.902, module version = 1.0.0
[    38.010] 	ABI class: X.Org Server Extension, version 6.0
[    38.010] (II) Loading extension XFree86-DRI
[    38.010] (II) LoadModule: "dri2"
[    38.011] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    38.018] (II) Module dri2: vendor="X.Org Foundation"
[    38.018] 	compiled for 1.12.1.902, module version = 1.2.0
[    38.018] 	ABI class: X.Org Server Extension, version 6.0
[    38.018] (II) Loading extension DRI2
[    38.018] (==) Matched intel as autoconfigured driver 0
[    38.018] (==) Matched vesa as autoconfigured driver 1
[    38.018] (==) Matched fbdev as autoconfigured driver 2
[    38.018] (==) Assigned the driver to the xf86ConfigLayout
[    38.018] (II) LoadModule: "intel"
[    38.079] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    38.098] (II) Module intel: vendor="X.Org Foundation"
[    38.098] 	compiled for 1.12.1, module version = 2.19.0
[    38.098] 	Module class: X.Org Video Driver
[    38.098] 	ABI class: X.Org Video Driver, version 12.0
[    38.098] (II) LoadModule: "vesa"
[    38.098] (WW) Warning, couldn't open module vesa
[    38.098] (II) UnloadModule: "vesa"
[    38.098] (II) Unloading vesa
[    38.098] (EE) Failed to load module "vesa" (module does not exist, 0)
[    38.098] (II) LoadModule: "fbdev"
[    38.098] (WW) Warning, couldn't open module fbdev
[    38.098] (II) UnloadModule: "fbdev"
[    38.098] (II) Unloading fbdev
[    38.098] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    38.098] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2)
[    38.099] (--) using VT number 7

[    38.104] drmOpenDevice: node name is /dev/dri/card0
[    38.104] drmOpenDevice: open result is 8, (OK)
[    38.104] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    38.104] drmOpenDevice: node name is /dev/dri/card0
[    38.104] drmOpenDevice: open result is 8, (OK)
[    38.104] drmOpenByBusid: drmOpenMinor returns 8
[    38.104] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    38.104] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    38.104] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    38.104] (==) intel(0): RGB weight 888
[    38.104] (==) intel(0): Default visual is TrueColor
[    38.104] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[    38.104] (--) intel(0): Chipset: "Arrandale"
[    38.104] (**) intel(0): Relaxed fencing enabled
[    38.104] (**) intel(0): Wait on SwapBuffers? enabled
[    38.104] (**) intel(0): Triple buffering? enabled
[    38.104] (**) intel(0): Framebuffer tiled
[    38.104] (**) intel(0): Pixmaps tiled
[    38.104] (**) intel(0): 3D buffers tiled
[    38.104] (**) intel(0): SwapBuffers wait enabled
[    38.104] (==) intel(0): video overlay key set to 0x101fe
[    38.104] (II) intel(0): Output LVDS1 has no monitor section
[    38.104] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    38.104] (II) intel(0): Output VGA1 has no monitor section
[    38.127] (II) intel(0): Output HDMI1 has no monitor section
[    38.166] (II) intel(0): Output DP1 has no monitor section
[    38.166] (II) intel(0): EDID for output LVDS1
[    38.166] (II) intel(0): Manufacturer: SEC  Model: 5441  Serial#: 0
[    38.166] (II) intel(0): Year: 2010  Week: 0
[    38.166] (II) intel(0): EDID Version: 1.3
[    38.166] (II) intel(0): Digital Display Input
[    38.166] (II) intel(0): Max Image Size [cm]: horiz.: 30  vert.: 17
[    38.166] (II) intel(0): Gamma: 2.20
[    38.166] (II) intel(0): No DPMS capabilities specified
[    38.166] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    38.167] (II) intel(0): First detailed timing is preferred mode
[    38.167] (II) intel(0): redX: 0.610 redY: 0.340   greenX: 0.330 greenY: 0.550
[    38.167] (II) intel(0): blueX: 0.155 blueY: 0.090   whiteX: 0.313 whiteY: 0.329
[    38.167] (II) intel(0): Manufacturer's mask: 0
[    38.167] (II) intel(0): Supported detailed timing:
[    38.167] (II) intel(0): clock: 72.3 MHz   Image Size:  309 x 174 mm
[    38.167] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    38.167] (II) intel(0): v_active: 768  v_sync: 773  v_sync_end 778 v_blanking: 790 v_border: 0
[    38.167] (II) intel(0): Supported detailed timing:
[    38.167] (II) intel(0): clock: 72.3 MHz   Image Size:  309 x 174 mm
[    38.167] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    38.167] (II) intel(0): v_active: 768  v_sync: 773  v_sync_end 778 v_blanking: 790 v_border: 0
[    38.167] (II) intel(0):  X3GT9140AT
[    38.167] (II) intel(0): Unknown vendor-specific block 0
[    38.167] (II) intel(0): EDID (in hex):
[    38.167] (II) intel(0): 	00ffffffffffff004ca3415400000000
[    38.167] (II) intel(0): 	00140103901e11780a4bc59c57548c27
[    38.167] (II) intel(0): 	17505400000001010101010101010101
[    38.167] (II) intel(0): 	010101010101411c56a0500016303020
[    38.167] (II) intel(0): 	550035ae1000001a411c56a050001630
[    38.167] (II) intel(0): 	3020550035ae1000001a000000fe0058
[    38.167] (II) intel(0): 	334754398131343041540a2000000000
[    38.167] (II) intel(0): 	000c10171b3669a9ff01010a2020000b
[    38.167] (II) intel(0): EDID vendor "SEC", prod id 21569
[    38.167] (II) intel(0): Printing DDC gathered Modelines:
[    38.167] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 773 778 790 +hsync -vsync (47.4 kHz eP)
[    38.167] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    38.167] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    38.167] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    38.167] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    38.167] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    38.167] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    38.167] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    38.167] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    38.167] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    38.167] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    38.167] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    38.167] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    38.167] (II) intel(0): Printing probed modes for output LVDS1
[    38.167] (II) intel(0): Modeline "1366x768"x60.0   72.33  1366 1414 1446 1526  768 773 778 790 +hsync -vsync (47.4 kHz eP)
[    38.167] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    38.167] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    38.167] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    38.167] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    38.167] (II) intel(0): EDID for output VGA1
[    38.190] (II) intel(0): EDID for output HDMI1
[    38.230] (II) intel(0): EDID for output DP1
[    38.230] (II) intel(0): Output LVDS1 connected
[    38.230] (II) intel(0): Output VGA1 disconnected
[    38.230] (II) intel(0): Output HDMI1 disconnected
[    38.230] (II) intel(0): Output DP1 disconnected
[    38.230] (II) intel(0): Using exact sizes for initial modes
[    38.230] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    38.230] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    38.230] (II) intel(0): Kernel page flipping support detected, enabling
[    38.230] (**) intel(0): Display dimensions: (300, 170) mm
[    38.230] (**) intel(0): DPI set to (115, 114)
[    38.230] (II) Loading sub module "fb"
[    38.230] (II) LoadModule: "fb"
[    38.230] (II) Loading /usr/lib/xorg/modules/libfb.so
[    38.238] (II) Module fb: vendor="X.Org Foundation"
[    38.238] 	compiled for 1.12.1.902, module version = 1.0.0
[    38.238] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    38.238] (II) Loading sub module "dri2"
[    38.238] (II) LoadModule: "dri2"
[    38.238] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    38.238] (II) Module dri2: vendor="X.Org Foundation"
[    38.238] 	compiled for 1.12.1.902, module version = 1.2.0
[    38.238] 	ABI class: X.Org Server Extension, version 6.0
[    38.238] (==) Depth 24 pixmap format is 32 bpp
[    38.238] (II) intel(0): [DRI2] Setup complete
[    38.238] (II) intel(0): [DRI2]   DRI driver: i965
[    38.238] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    38.262] (II) UXA(0): Driver registered support for the following operations:
[    38.262] (II)         solid
[    38.262] (II)         copy
[    38.262] (II)         composite (RENDER acceleration)
[    38.262] (II)         put_image
[    38.262] (II)         get_image
[    38.262] (==) intel(0): Backing store disabled
[    38.262] (==) intel(0): Silken mouse enabled
[    38.262] (II) intel(0): Initializing HW Cursor
[    38.262] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    38.266] (==) intel(0): DPMS enabled
[    38.266] (==) intel(0): Intel XvMC decoder enabled
[    38.266] (II) intel(0): Set up textured video
[    38.266] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    38.266] (II) intel(0): direct rendering: DRI2 Enabled
[    38.266] (==) intel(0): hotplug detection: "enabled"
[    38.330] (--) RandR disabled
[    38.330] (II) Initializing built-in extension Generic Event Extension
[    38.330] (II) Initializing built-in extension SHAPE
[    38.330] (II) Initializing built-in extension MIT-SHM
[    38.330] (II) Initializing built-in extension XInputExtension
[    38.330] (II) Initializing built-in extension XTEST
[    38.330] (II) Initializing built-in extension BIG-REQUESTS
[    38.330] (II) Initializing built-in extension SYNC
[    38.330] (II) Initializing built-in extension XKEYBOARD
[    38.330] (II) Initializing built-in extension XC-MISC
[    38.330] (II) Initializing built-in extension SECURITY
[    38.330] (II) Initializing built-in extension XINERAMA
[    38.330] (II) Initializing built-in extension XFIXES
[    38.330] (II) Initializing built-in extension RENDER
[    38.330] (II) Initializing built-in extension RANDR
[    38.330] (II) Initializing built-in extension COMPOSITE
[    38.330] (II) Initializing built-in extension DAMAGE
[    38.503] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    38.503] (II) AIGLX: enabled GLX_INTEL_swap_event
[    38.503] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    38.503] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    38.503] (II) AIGLX: Loaded and initialized i965
[    38.503] (II) GLX: Initialized DRI2 GL provider for screen 0
[    38.504] (II) intel(0): Setting screen physical size to 361 x 203
[    38.719] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    38.719] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    38.719] (II) LoadModule: "evdev"
[    38.719] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    38.732] (II) Module evdev: vendor="X.Org Foundation"
[    38.732] 	compiled for 1.12.0, module version = 2.7.0
[    38.732] 	Module class: X.Org XInput Driver
[    38.732] 	ABI class: X.Org XInput driver, version 16.0
[    38.732] (II) Using input driver 'evdev' for 'Power Button'
[    38.732] (**) Power Button: always reports core events
[    38.732] (**) evdev: Power Button: Device: "/dev/input/event4"
[    38.732] (--) evdev: Power Button: Vendor 0 Product 0x1
[    38.732] (--) evdev: Power Button: Found keys
[    38.732] (II) evdev: Power Button: Configuring as keyboard
[    38.732] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    38.732] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    38.732] (**) Option "xkb_rules" "evdev"
[    38.732] (**) Option "xkb_model" "evdev"
[    38.732] (**) Option "xkb_layout" "us"
[    38.773] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    38.773] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    38.773] (II) Using input driver 'evdev' for 'Video Bus'
[    38.773] (**) Video Bus: always reports core events
[    38.773] (**) evdev: Video Bus: Device: "/dev/input/event8"
[    38.773] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    38.773] (--) evdev: Video Bus: Found keys
[    38.773] (II) evdev: Video Bus: Configuring as keyboard
[    38.773] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8/event8"
[    38.773] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    38.773] (**) Option "xkb_rules" "evdev"
[    38.773] (**) Option "xkb_model" "evdev"
[    38.773] (**) Option "xkb_layout" "us"
[    38.774] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    38.774] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    38.774] (II) Using input driver 'evdev' for 'Video Bus'
[    38.774] (**) Video Bus: always reports core events
[    38.774] (**) evdev: Video Bus: Device: "/dev/input/event7"
[    38.774] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    38.774] (--) evdev: Video Bus: Found keys
[    38.774] (II) evdev: Video Bus: Configuring as keyboard
[    38.774] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
[    38.774] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    38.774] (**) Option "xkb_rules" "evdev"
[    38.774] (**) Option "xkb_model" "evdev"
[    38.774] (**) Option "xkb_layout" "us"
[    38.775] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    38.775] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    38.775] (II) Using input driver 'evdev' for 'Power Button'
[    38.775] (**) Power Button: always reports core events
[    38.775] (**) evdev: Power Button: Device: "/dev/input/event2"
[    38.775] (--) evdev: Power Button: Vendor 0 Product 0x1
[    38.775] (--) evdev: Power Button: Found keys
[    38.775] (II) evdev: Power Button: Configuring as keyboard
[    38.775] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[    38.775] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    38.775] (**) Option "xkb_rules" "evdev"
[    38.775] (**) Option "xkb_model" "evdev"
[    38.775] (**) Option "xkb_layout" "us"
[    38.776] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    38.776] (II) No input driver specified, ignoring this device.
[    38.776] (II) This device may have been added with another device file.
[    38.777] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event6)
[    38.777] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "evdev keyboard catchall"
[    38.777] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_2HDM'
[    38.777] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
[    38.777] (**) evdev: Laptop_Integrated_Webcam_2HDM: Device: "/dev/input/event6"
[    38.777] (--) evdev: Laptop_Integrated_Webcam_2HDM: Vendor 0x408 Product 0x2fb2
[    38.777] (--) evdev: Laptop_Integrated_Webcam_2HDM: Found keys
[    38.777] (II) evdev: Laptop_Integrated_Webcam_2HDM: Configuring as keyboard
[    38.777] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6/event6"
[    38.777] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD, id 10)
[    38.777] (**) Option "xkb_rules" "evdev"
[    38.777] (**) Option "xkb_model" "evdev"
[    38.777] (**) Option "xkb_layout" "us"
[    38.777] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[    38.778] (II) No input driver specified, ignoring this device.
[    38.778] (II) This device may have been added with another device file.
[    38.778] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event11)
[    38.778] (II) No input driver specified, ignoring this device.
[    38.778] (II) This device may have been added with another device file.
[    38.778] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event12)
[    38.778] (II) No input driver specified, ignoring this device.
[    38.778] (II) This device may have been added with another device file.
[    38.779] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event13)
[    38.779] (II) No input driver specified, ignoring this device.
[    38.779] (II) This device may have been added with another device file.
[    38.779] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event14)
[    38.779] (II) No input driver specified, ignoring this device.
[    38.779] (II) This device may have been added with another device file.
[    38.779] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    38.779] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    38.780] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    38.780] (**) AT Translated Set 2 keyboard: always reports core events
[    38.780] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    38.780] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    38.780] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    38.780] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    38.780] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    38.780] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    38.780] (**) Option "xkb_rules" "evdev"
[    38.780] (**) Option "xkb_model" "evdev"
[    38.780] (**) Option "xkb_layout" "us"
[    38.781] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[    38.781] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    38.781] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    38.781] (II) LoadModule: "synaptics"
[    38.781] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    38.847] (II) Module synaptics: vendor="X.Org Foundation"
[    38.847] 	compiled for 1.12.1, module version = 1.6.1
[    38.847] 	Module class: X.Org XInput Driver
[    38.847] 	ABI class: X.Org XInput driver, version 16.0
[    38.847] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    38.847] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    38.847] (**) Option "Device" "/dev/input/event9"
[    38.848] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    38.848] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5632
[    38.848] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4756
[    38.848] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    38.848] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    38.848] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    38.848] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    38.848] (**) Option "TapButton1" "1"
[    38.848] (**) Option "TapButton2" "2"
[    38.848] (**) Option "TapButton3" "3"
[    38.848] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    38.848] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    38.849] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input9/event9"
[    38.849] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[    38.849] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    38.849] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    38.849] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[    38.849] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    38.849] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    38.849] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    38.849] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    38.849] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    38.849] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    38.849] (II) No input driver specified, ignoring this device.
[    38.849] (II) This device may have been added with another device file.
[    38.849] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[    38.849] (II) No input driver specified, ignoring this device.
[    38.849] (II) This device may have been added with another device file.
[    38.850] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
[    38.850] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    38.850] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    38.850] (**) Dell WMI hotkeys: always reports core events
[    38.850] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event5"
[    38.850] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[    38.850] (--) evdev: Dell WMI hotkeys: Found keys
[    38.850] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[    38.850] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[    38.850] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 13)
[    38.850] (**) Option "xkb_rules" "evdev"
[    38.850] (**) Option "xkb_model" "evdev"
[    38.850] (**) Option "xkb_layout" "us"
[    41.420] (II) intel(0): EDID vendor "SEC", prod id 21569
[    41.420] (II) intel(0): Printing DDC gathered Modelines:
[    41.420] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 773 778 790 +hsync -vsync (47.4 kHz eP)
[    43.943] (II) intel(0): EDID vendor "SEC", prod id 21569
[    43.943] (II) intel(0): Printing DDC gathered Modelines:
[    43.943] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 773 778 790 +hsync -vsync (47.4 kHz eP)

Last edited by Inxsible (2012-06-04 20:35:29)

Offline

#13 2012-06-04 20:27:10

nu11_p01n73R
Member
Registered: 2012-06-04
Posts: 22

Re: Gnome 3.4 installation

glxinfo provides an error ..command not found
what do you mean by login methods?

Offline

#14 2012-06-04 20:30:16

Shark
Member
From: /dev/zero
Registered: 2011-02-28
Posts: 686

Re: Gnome 3.4 installation

Hi

First - use BBC code when you are posting such a long logs
Second - do you start your session through startx or by gdm or other display manager.

If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau

Registered Linux User: #559057

Offline

#15 2012-06-04 20:31:16

Pres
Member
Registered: 2011-09-12
Posts: 423

Re: Gnome 3.4 installation

Use code tags please for that log. He's asking whether you use GDM or startx/.xinitrc. For glxinfo you need mesa-demos.

Offline

#16 2012-06-04 20:33:21

nu11_p01n73R
Member
Registered: 2012-06-04
Posts: 22

Re: Gnome 3.4 installation

i use startx

Offline

#17 2012-06-04 20:34:04

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,941
Website

Re: Gnome 3.4 installation

nu11_p01n73R wrote:

i use startx

I really recommend to read the gnome wiki. There you will find out how to setup correctly ~/.xinitrc.

Give what you have. To someone, it may be better than you dare to think.

Offline

#18 2012-06-04 20:34:52

Inxsible
Forum Fellow
From: Chicago
Registered: 2008-06-09
Posts: 9,183

Re: Gnome 3.4 installation

nu11_p01n73R,

Please use code tags when pasting long snippets of code. Also read our forum rules on how to post and what tags to use. I have edited your post this time.

https://wiki.archlinux.org/index.php/Forum_Etiquette


https://wiki.archlinux.org/index.php/Fo … s_and_Code

Forum Rules

There's no such thing as a stupid question, but there sure are a lot of inquisitive idiots !

Offline

#19 2012-06-04 20:41:15

nu11_p01n73R
Member
Registered: 2012-06-04
Posts: 22

Re: Gnome 3.4 installation

I have a single line in xinitrc

exec ck-launch-session gnome-session

actually i did had an .xinitrc file i creates one by adding the above line

Last edited by nu11_p01n73R (2012-06-04 20:52:24)

Offline

#20 2012-06-04 20:54:29

nu11_p01n73R
Member
Registered: 2012-06-04
Posts: 22

Re: Gnome 3.4 installation

i hope the same is written in wiki page as well
https://wiki.archlinux.org/index.php/GN … ning_GNOME

Offline

#21 2012-06-04 21:08:58

nu11_p01n73R
Member
Registered: 2012-06-04
Posts: 22

Re: Gnome 3.4 installation

I am lost.....Is this because i miss something in gnome or is there any problem with X

Offline

#22 2012-06-04 21:14:13

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,941
Website

Re: Gnome 3.4 installation

nu11_p01n73R wrote:

I am lost.....Is this because i miss something in gnome or is there any problem with X

you tell us. since you didn't provide all the infos, I cannot be sure.

Give what you have. To someone, it may be better than you dare to think.

Offline

#23 2012-06-04 21:16:08

Inxsible
Forum Fellow
From: Chicago
Registered: 2008-06-09
Posts: 9,183

Re: Gnome 3.4 installation

Seems you don't respond to requests either. wonder has been asking you for logs which you haven't provided. I asked you to read the forum rules, but you blatantly avoid following the rules about consecutive posting.

I am inclined to close this thread if your next post doesn't show relevant information with respect to the issue here.

Forum Rules

There's no such thing as a stupid question, but there sure are a lot of inquisitive idiots !

Offline

#24 2012-06-04 21:19:12

nu11_p01n73R
Member
Registered: 2012-06-04
Posts: 22

Re: Gnome 3.4 installation

actually i dont know much about these things....to look into log file and all So if you could be little more clear about what details i should provide,then it will be much helpful .thank you smile

Offline

#25 2012-06-04 21:21:16

Inxsible
Forum Fellow
From: Chicago
Registered: 2008-06-09
Posts: 9,183

Re: Gnome 3.4 installation

wonder wrote:

this you didn't  provide any useful information. Hell us to help you.

hint: /var/log/Xorg.0.log
hint: glxinfo | grep -i opengl
hint: login method.

How clearer do you want us to get?

Forum Rules

There's no such thing as a stupid question, but there sure are a lot of inquisitive idiots !

Offline

Pages: 1 2

Board footer

Powered by FluxBB