You are not logged in.
hi guys,
i have a machine with 2 ethernet interfaces;
eth0="eth0 149.153.8.1 netmask 255.255.255.0 broadcast 149.153.8.255 up"
eth1="eth1 149.153.9.1 netmask 255.255.255.0 broadcast 149.153.9.255 up"
my gateway to public internet is:
149.153.8.253
i want to be able to use 149.153.9.1 as the default ip address for communications for the public internet
( part of my college firewalls config is that no communication from 149.153.8.* is alloweable to the public net, but all from 149.153.9.* is)
cheers!
Offline
You will need a different gateway so - one on the .9.* subnet.
How's the craic in Carlow anyway?
Offline
damn ok, ill just get a second machine to act as a gateway for this gateway so i can download stuff
carlow is cool! bit boring after 4 years in college!
where do you hail from??
Offline
Bray these days. I have relatives in Carlow, though - been there a lot over the years.
Offline
ill get another machine for another gateway..
college down here at all????
its not a bad spot
Offline
Not college, no - family stuff.
Sounds like you have a lot of freedom to sort out your network - on good terms with the admins (or maybe you are one)?
Offline
haha actually on good / bad terms with the admins
depends on the admin
its a honeypot project
and they own 149.153.*.* so they have no problems assigning two class C's for a project, ( vlan'd of course )
using the arch box as a router, but will be using it to restrict connections out of the network, just have to sort a few little things first
Offline
just found this:
ping www.google.ie -I 149.153.9.1
and that uses the speciefied IP
ill do more googleing
Offline