You are not logged in.

Pages: 1

#1 2017-09-21 08:19:47

T84
Member
From: Italy
Registered: 2012-03-12
Posts: 32

Wireless PCI card: cannot allocate memory

After some update I'm not able to connect to my wifi through wireless PCI card.
The card is this one: https://www.amazon.it/gp/product/B00560 … UTF8&psc=1
I don't know if somehow this issue could be related to my recent graphic card change that troubled the PCI's scheme in Linux.

I'm able to use a USB network adapter to go online but if I try to put the PCI interface up I get this error:

sudo ip link set  wlp35s0 up
RTNETLINK answers: Cannot allocate memory

During the boot, before the login screen, I see overflow errors.
Something like

phy0: rt2x00queue_initialize: Error - Queue entries allocation failed

I tried to blacklist rt2x00 driver, then just 2800, then both.
I installed (and later removed) rt3290sta-dkms package.

If I try to go online with wifi-menu I get the following outcome:

sudo wifi-menu wlp35s0
[sudo] password for ***:
Scanning for networks... Could not set interface wlp35s0 flags (UP): Cannot allocate memory
nl80211: Could not set interface 'wlp35s0' UP
Could not set interface wlp35s0 flags (UP): Cannot allocate memory
WEXT: Could not set interface 'wlp35s0' UP
wlp35s0: Failed to initialize driver interface
failed
No networks found

I know that with a fresh installation I could get the wireless card working again, but I don't find it an elegant solution, plus I'd like to learn more about this kind of problem to be able to solve it in future.
Any idea? I tried to report all useful information but I don't know if I'm missing something.

Thanks in advance.

Offline

#2 2017-09-21 09:40:36

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 13,347

Re: Wireless PCI card: cannot allocate memory

That card appears to use a rtl 8192SE chipset, which has it's own kernel module.

don't blacklist any rtl modules, reboot, post lspci -k and dmesg or journal.

Last edited by Lone_Wolf (2017-09-21 09:40:46)

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

#3 2017-09-21 16:48:55

T84
Member
From: Italy
Registered: 2012-03-12
Posts: 32

Re: Wireless PCI card: cannot allocate memory

I removed the blacklist files and rebooted.
Then:

lspci -k
23:00.0 Network controller: Ralink corp. RT5392 PCIe Wireless Network Adapter
       
Subsystem: Ralink corp. RT5392 PCIe Wireless Network Adapter
        Kernel driver in use: rt2800pci
        Kernel modules: rt2800pci

And:

dmesg
[   45.026408] nommu_map_single: overflow 3d676e04c+3872 of device mask ffffffff
[   45.026420] ieee80211 phy0: rt2x00queue_initialize: Error - Queue entries allocation failed
[   45.046394] nommu_map_single: overflow 3d676e04c+3872 of device mask ffffffff
[   45.046403] ieee80211 phy0: rt2x00queue_initialize: Error - Queue entries allocation failed
[   55.033729] nommu_map_single: overflow 3e661c04c+3872 of device mask ffffffff
[   55.033738] ieee80211 phy0: rt2x00queue_initialize: Error - Queue entries allocation failed
[   55.053731] nommu_map_single: overflow 3e661c04c+3872 of device mask ffffffff
[   55.053738] ieee80211 phy0: rt2x00queue_initialize: Error - Queue entries allocation failed

Offline

#4 2017-09-22 16:45:07

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 13,347

Re: Wireless PCI card: cannot allocate memory

The link in first post pointed to an Atlantis-Land A02-PCIE1-W300N card, which uses a realtek chipset.

The lspci -k snippet talks about a ralink chipset.

please post full lspci -k , dmesg and/or journalctl of a boot.


It may be  a kernel problem, have you tried to boot with linux-lts ?
(you can have both linux & linux-lts installed)

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

#5 2017-09-22 19:14:20

T84
Member
From: Italy
Registered: 2012-03-12
Posts: 32

Re: Wireless PCI card: cannot allocate memory

I'm sorry for not posting the full reports in the previous post.
Here we go.

$ lspci -k
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1450
        Subsystem: Advanced Micro Devices, Inc. [AMD] Device 1450
00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1452
00:01.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 1453
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1452
00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1452
00:04.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1452
00:07.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1452
00:07.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 1454
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1452
00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 1454
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 59)
        Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7a34
        Kernel driver in use: piix4_smbus
        Kernel modules: i2c_piix4, sp5100_tco
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
        Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7a34
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1460
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1461
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1462
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1463
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1464
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1465
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1466
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1467
03:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] USB 3.1 XHCI Controller (rev 02)
        Subsystem: ASMedia Technology Inc. Device 1142
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci
03:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] Device 43b7 (rev 02)
        Subsystem: ASMedia Technology Inc. Device 1062
        Kernel driver in use: ahci
        Kernel modules: ahci
03:00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43b2 (rev 02)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
04:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43b4 (rev 02)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
04:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43b4 (rev 02)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
04:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43b4 (rev 02)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
04:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43b4 (rev 02)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
04:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43b4 (rev 02)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
1f:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03)
        Kernel modules: shpchp
21:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
        Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7a34
        Kernel driver in use: r8169
        Kernel modules: r8169
22:00.0 VGA compatible controller: NVIDIA Corporation GP107 [GeForce GTX 1050 Ti] (rev a1)
        Subsystem: Gigabyte Technology Co., Ltd Device 3763
        Kernel driver in use: nvidia
        Kernel modules: nouveau, nvidia_drm, nvidia
22:00.1 Audio device: NVIDIA Corporation GP107GL High Definition Audio Controller (rev a1)
        Subsystem: Gigabyte Technology Co., Ltd Device 3763
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel
23:00.0 Network controller: Ralink corp. RT5392 PCIe Wireless Network Adapter
        Subsystem: Ralink corp. RT5392 PCIe Wireless Network Adapter
        Kernel driver in use: rt2800pci
        Kernel modules: rt2800pci
25:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Device 145a
        Subsystem: Advanced Micro Devices, Inc. [AMD] Device 145a
25:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Device 1456
        Subsystem: Advanced Micro Devices, Inc. [AMD] Device 1456
        Kernel driver in use: ccp
        Kernel modules: ccp
25:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] USB3 Host Controller
        Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7a34
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci
26:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Device 1455
        Subsystem: Advanced Micro Devices, Inc. [AMD] Device 1455
26:00.2 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51)
        Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7a34
        Kernel driver in use: ahci
        Kernel modules: ahci
26:00.3 Audio device: Advanced Micro Devices, Inc. [AMD] Device 1457
        Subsystem: Micro-Star International Co., Ltd. [MSI] Device da34
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

And:

$ dmesg
[    0.000000] Linux version 4.12.13-1-ARCH (builduser@foutrelis) (gcc version 7.2.0 (GCC) ) #1 SMP PREEMPT Fri Sep 15 06:36:43 UTC 2017
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=30dc4de8-a607-40db-96d4-01755b1b2c53 rw quiet resume=UUID=2b4886e2-8af5-4c6e-8977-08428632ce3f
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009d7ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x00000000dd2b4fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dd2b5000-0x00000000dd3cdfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dd3ce000-0x00000000dd4c0fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dd4c1000-0x00000000dd892fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dd893000-0x00000000de3e8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000de3e9000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fdf00000-0x00000000fdffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0 present.
[    0.000000] DMI: Micro-Star International Co., Ltd. MS-7A34/B350 TOMAHAWK (MS-7A34), BIOS 1.80 09/13/2017
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Using PIT calibration value
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x41f380 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000DF000000 mask FFFFFF000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000420000000 aka 16896M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff9fb800097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x3b4d5f000, 0x3b4d5ffff] PGTABLE
[    0.000000] BRK [0x3b4d60000, 0x3b4d60fff] PGTABLE
[    0.000000] BRK [0x3b4d61000, 0x3b4d61fff] PGTABLE
[    0.000000] BRK [0x3b4d62000, 0x3b4d62fff] PGTABLE
[    0.000000] BRK [0x3b4d63000, 0x3b4d63fff] PGTABLE
[    0.000000] BRK [0x3b4d64000, 0x3b4d64fff] PGTABLE
[    0.000000] BRK [0x3b4d65000, 0x3b4d65fff] PGTABLE
[    0.000000] BRK [0x3b4d66000, 0x3b4d66fff] PGTABLE
[    0.000000] BRK [0x3b4d67000, 0x3b4d67fff] PGTABLE
[    0.000000] BRK [0x3b4d68000, 0x3b4d68fff] PGTABLE
[    0.000000] BRK [0x3b4d69000, 0x3b4d69fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x370c1000-0x37857fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DD4C1090 0000A4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DD4C6FB0 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170303/tbfadt-658)
[    0.000000] ACPI: DSDT 0x00000000DD4C11D0 005DDA (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000DD87CE00 000040
[    0.000000] ACPI: APIC 0x00000000DD4C70C8 0000DE (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DD4C71A8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000DD4C71F0 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DD4C7290 008C4C (v02 AMD    AMD ALIB 00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000DD4CFEE0 001500 (v01 AMD    AMD CPU  00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000DD4D13E0 000BD0 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000DD4D1FB0 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000DD4D1FE0 0017B7 (v01 AMD    AMD AOD  00000001 INTL 20120913)
[    0.000000] ACPI: MCFG 0x00000000DD4D3798 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000DD4D37D8 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: SSDT 0x00000000DD4D3810 000024 (v01 AMDFCH FCHZP    00001000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000DD4D3838 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: IVRS 0x00000000DD4D3880 000030 (v02 AMD    AMD IVRS 00000001 AMD  00000000)
[    0.000000] ACPI: SSDT 0x00000000DD4D38B0 0000F8 (v01 AMD    AMD PT   00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000DD4D39A8 001664 (v01 AMD    CPMCMN   00000001 INTL 20120913)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x41f37b000-0x41f37ffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041f37ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009d7ffff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x00000000dd2b4fff]
[    0.000000]   node   0: [mem 0x00000000dd3ce000-0x00000000dd4c0fff]
[    0.000000]   node   0: [mem 0x00000000de3e9000-0x00000000deffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041f37ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
[    0.000000] On node 0 totalpages: 4182107
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14133 pages used for memmap
[    0.000000]   DMA32 zone: 904511 pages, LIFO batch:31
[    0.000000]   Normal zone: 51150 pages used for memmap
[    0.000000]   Normal zone: 3273600 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x09d80000-0x09ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd2b5000-0xdd3cdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd4c1000-0xdd892fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd893000-0xde3e8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfdefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfdf00000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff9fbc0e600000 s106328 r8192 d28840 u262144
[    0.000000] pcpu-alloc: s106328 r8192 d28840 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4116739
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=30dc4de8-a607-40db-96d4-01755b1b2c53 rw quiet resume=UUID=2b4886e2-8af5-4c6e-8977-08428632ce3f
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16376412K/16728428K available (6543K kernel code, 1124K rwdata, 2048K rodata, 1324K init, 912K bss, 352016K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] ftrace: allocating 27931 entries in 110 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=16.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] NR_IRQS:8448 nr_irqs:1096 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.006666] tsc: PIT calibration matches HPET. 1 loops
[    0.006666] tsc: Detected 3199.928 MHz processor
[    0.006666] Calibrating delay loop (skipped), value calculated using timer frequency.. 6402.51 BogoMIPS (lpj=10666426)
[    0.006666] pid_max: default: 32768 minimum: 301
[    0.006666] ACPI: Core revision 20170303
[    0.012627] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.012650] Security Framework initialized
[    0.012651] Yama: becoming mindful.
[    0.013447] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.015738] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.016804] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.016810] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.017045] CPU: Physical Processor ID: 0
[    0.017046] CPU: Processor Core ID: 0
[    0.017052] mce: CPU supports 23 MCE banks
[    0.017069] LVT offset 1 assigned for vector 0xf9
[    0.017190] LVT offset 2 assigned for vector 0xf4
[    0.017201] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.017202] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[    0.018112] Freeing SMP alternatives memory: 24K
[    0.020057] smpboot: Max logical packages: 3
[    0.020066] [Firmware Bug]: AMD-Vi: IOAPIC[13] not in IVRS table
[    0.020069] [Firmware Bug]: AMD-Vi: IOAPIC[14] not in IVRS table
[    0.020071] [Firmware Bug]: AMD-Vi: No southbridge IOAPIC found
[    0.020073] AMD-Vi: Disabling interrupt remapping
[    0.020075] Switched APIC routing to physical flat.
[    0.020841] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.056666] smpboot: CPU0: AMD Ryzen 5 1600 Six-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
[    0.066672] Performance Events: Fam17h core perfctr, AMD PMU driver.
[    0.066676] ... version:                0
[    0.066676] ... bit width:              48
[    0.066676] ... generic registers:      6
[    0.066677] ... value mask:             0000ffffffffffff
[    0.066677] ... max period:             00007fffffffffff
[    0.066678] ... fixed-purpose events:   0
[    0.066678] ... event mask:             000000000000003f
[    0.086739] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.093334] smp: Bringing up secondary CPUs ...
[    0.120008] x86: Booting SMP configuration:
[    0.120009] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
[    0.758693] smp: Brought up 1 node, 12 CPUs
[    0.758693] smpboot: Total of 12 processors activated (76594.51 BogoMIPS)
[    0.758693] sched_clock: Marking stable (756666591, 0)->(862026515, -105359924)
[    0.758350] devtmpfs: initialized
[    0.758386] x86/mm: Memory block size: 128MB
[    0.761054] PM: Registering ACPI NVS region [mem 0xdd4c1000-0xdd892fff] (4005888 bytes)
[    0.761140] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.761152] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    0.761238] pinctrl core: initialized pinctrl subsystem
[    0.761298] RTC time: 21:08:40, date: 09/22/17
[    0.761390] NET: Registered protocol family 16
[    0.761513] cpuidle: using governor ladder
[    0.761552] cpuidle: using governor menu
[    0.761554] PCCT header not found.
[    0.761669] ACPI: bus type PCI registered
[    0.761669] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.761723] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.761724] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.761730] PCI: Using configuration type 1 for base access
[    0.762110] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.762111] mtrr: probably your BIOS does not setup all CPUs.
[    0.762111] mtrr: corrected configuration.
[    0.762515] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.762516] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.762750] ACPI: Added _OSI(Module Device)
[    0.762751] ACPI: Added _OSI(Processor Device)
[    0.762752] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.762752] ACPI: Added _OSI(Processor Aggregator Device)
[    0.762881] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.762892] ACPI: Executed 2 blocks of module-level executable AML code
[    0.767997] ACPI: Interpreter enabled
[    0.768009] ACPI: (supports S0 S3 S4 S5)
[    0.768009] ACPI: Using IOAPIC for interrupt routing
[    0.768110] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.773594] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.773597] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.773741] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.773748] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.773966] PCI host bridge to bus 0000:00
[    0.773968] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.773968] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.773969] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.773970] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.773971] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.773972] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.773973] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[    0.773973] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.773974] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.773979] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
[    0.774056] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[    0.774113] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
[    0.774157] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[    0.774193] pci 0000:00:01.3: System wakeup disabled by ACPI
[    0.774218] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
[    0.774286] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
[    0.774353] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
[    0.774424] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
[    0.774475] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
[    0.774510] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.774538] pci 0000:00:07.1: System wakeup disabled by ACPI
[    0.774568] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[    0.774620] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
[    0.774657] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.774685] pci 0000:00:08.1: System wakeup disabled by ACPI
[    0.774750] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.774943] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.775141] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
[    0.775183] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
[    0.775225] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
[    0.775267] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
[    0.775309] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
[    0.775350] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
[    0.775391] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
[    0.775432] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
[    0.775524] pci 0000:03:00.0: [1022:43bb] type 00 class 0x0c0330
[    0.775542] pci 0000:03:00.0: reg 0x10: [mem 0xfd4a0000-0xfd4a7fff 64bit]
[    0.775612] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.775645] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.775669] pci 0000:03:00.1: [1022:43b7] type 00 class 0x010601
[    0.775709] pci 0000:03:00.1: reg 0x24: [mem 0xfd480000-0xfd49ffff]
[    0.775716] pci 0000:03:00.1: reg 0x30: [mem 0xfd400000-0xfd47ffff pref]
[    0.775751] pci 0000:03:00.1: PME# supported from D3hot D3cold
[    0.775787] pci 0000:03:00.2: [1022:43b2] type 01 class 0x060400
[    0.775851] pci 0000:03:00.2: PME# supported from D3hot D3cold
[    0.786653] pci 0000:00:01.3: PCI bridge to [bus 03-24]
[    0.786655] pci 0000:00:01.3:   bridge window [io  0xe000-0xffff]
[    0.786657] pci 0000:00:01.3:   bridge window [mem 0xfc000000-0xfd4fffff]
[    0.786660] pci 0000:00:01.3:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.786707] pci 0000:04:00.0: [1022:43b4] type 01 class 0x060400
[    0.786783] pci 0000:04:00.0: PME# supported from D3hot D3cold
[    0.786810] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.786835] pci 0000:04:01.0: [1022:43b4] type 01 class 0x060400
[    0.786910] pci 0000:04:01.0: PME# supported from D3hot D3cold
[    0.786936] pci 0000:04:01.0: System wakeup disabled by ACPI
[    0.786963] pci 0000:04:04.0: [1022:43b4] type 01 class 0x060400
[    0.787039] pci 0000:04:04.0: PME# supported from D3hot D3cold
[    0.787088] pci 0000:04:06.0: [1022:43b4] type 01 class 0x060400
[    0.787163] pci 0000:04:06.0: PME# supported from D3hot D3cold
[    0.787212] pci 0000:04:07.0: [1022:43b4] type 01 class 0x060400
[    0.787287] pci 0000:04:07.0: PME# supported from D3hot D3cold
[    0.787350] pci 0000:03:00.2: PCI bridge to [bus 04-24]
[    0.787354] pci 0000:03:00.2:   bridge window [io  0xe000-0xffff]
[    0.787356] pci 0000:03:00.2:   bridge window [mem 0xfc000000-0xfd3fffff]
[    0.787360] pci 0000:03:00.2:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.787410] pci 0000:1f:00.0: [1b21:1080] type 01 class 0x060400
[    0.787572] pci 0000:1f:00.0: supports D1 D2
[    0.787572] pci 0000:1f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.796655] pci 0000:04:00.0: PCI bridge to [bus 1f-20]
[    0.796798] pci 0000:1f:00.0: PCI bridge to [bus 20]
[    0.796879] pci 0000:21:00.0: [10ec:8168] type 00 class 0x020000
[    0.796911] pci 0000:21:00.0: reg 0x10: [io  0xf000-0xf0ff]
[    0.796946] pci 0000:21:00.0: reg 0x18: [mem 0xfd304000-0xfd304fff 64bit]
[    0.796968] pci 0000:21:00.0: reg 0x20: [mem 0xfd300000-0xfd303fff 64bit]
[    0.797088] pci 0000:21:00.0: supports D1 D2
[    0.797088] pci 0000:21:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.806670] pci 0000:04:01.0: PCI bridge to [bus 21]
[    0.806674] pci 0000:04:01.0:   bridge window [io  0xf000-0xffff]
[    0.806677] pci 0000:04:01.0:   bridge window [mem 0xfd300000-0xfd3fffff]
[    0.806727] pci 0000:22:00.0: [10de:1c82] type 00 class 0x030000
[    0.806763] pci 0000:22:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff]
[    0.806783] pci 0000:22:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.806803] pci 0000:22:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.806816] pci 0000:22:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.806829] pci 0000:22:00.0: reg 0x30: [mem 0xfd000000-0xfd07ffff pref]
[    0.807018] pci 0000:22:00.1: [10de:0fb9] type 00 class 0x040300
[    0.807042] pci 0000:22:00.1: reg 0x10: [mem 0xfd080000-0xfd083fff]
[    0.816671] pci 0000:04:04.0: PCI bridge to [bus 22]
[    0.816676] pci 0000:04:04.0:   bridge window [io  0xe000-0xefff]
[    0.816678] pci 0000:04:04.0:   bridge window [mem 0xfc000000-0xfd0fffff]
[    0.816682] pci 0000:04:04.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.816730] pci 0000:23:00.0: [1814:5392] type 00 class 0x028000
[    0.816757] pci 0000:23:00.0: reg 0x10: [mem 0xfd200000-0xfd20ffff]
[    0.826661] pci 0000:04:06.0: PCI bridge to [bus 23]
[    0.826667] pci 0000:04:06.0:   bridge window [mem 0xfd200000-0xfd2fffff]
[    0.826701] pci 0000:04:07.0: PCI bridge to [bus 24]
[    0.826765] pci 0000:25:00.0: [1022:145a] type 00 class 0x130000
[    0.826837] pci 0000:25:00.2: [1022:1456] type 00 class 0x108000
[    0.826850] pci 0000:25:00.2: reg 0x18: [mem 0xfd700000-0xfd7fffff]
[    0.826860] pci 0000:25:00.2: reg 0x24: [mem 0xfd800000-0xfd801fff]
[    0.826914] pci 0000:25:00.3: [1022:145c] type 00 class 0x0c0330
[    0.826923] pci 0000:25:00.3: reg 0x10: [mem 0xfd600000-0xfd6fffff 64bit]
[    0.826961] pci 0000:25:00.3: PME# supported from D0 D3hot D3cold
[    0.826972] pci 0000:25:00.3: System wakeup disabled by ACPI
[    0.827003] pci 0000:00:07.1: PCI bridge to [bus 25]
[    0.827007] pci 0000:00:07.1:   bridge window [mem 0xfd600000-0xfd8fffff]
[    0.827044] pci 0000:26:00.0: [1022:1455] type 00 class 0x130000
[    0.827119] pci 0000:26:00.2: [1022:7901] type 00 class 0x010601
[    0.827143] pci 0000:26:00.2: reg 0x24: [mem 0xfd908000-0xfd908fff]
[    0.827172] pci 0000:26:00.2: PME# supported from D3hot D3cold
[    0.827203] pci 0000:26:00.3: [1022:1457] type 00 class 0x040300
[    0.827210] pci 0000:26:00.3: reg 0x10: [mem 0xfd900000-0xfd907fff]
[    0.827255] pci 0000:26:00.3: PME# supported from D0 D3hot D3cold
[    0.827296] pci 0000:00:08.1: PCI bridge to [bus 26]
[    0.827300] pci 0000:00:08.1:   bridge window [mem 0xfd900000-0xfd9fffff]
[    0.827582] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.827622] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.827656] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.827700] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.827738] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.827769] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.827800] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.827832] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.828167] pci 0000:22:00.0: vgaarb: setting as boot VGA device
[    0.828168] pci 0000:22:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.828169] pci 0000:22:00.0: vgaarb: bridge control possible
[    0.828170] vgaarb: loaded
[    0.828197] EDAC MC: Ver: 3.0.0
[    0.828322] PCI: Using ACPI for IRQ routing
[    0.831130] PCI: pci_cache_line_size set to 64 bytes
[    0.831195] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.831195] e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff]
[    0.831196] e820: reserve RAM buffer [mem 0xdd2b5000-0xdfffffff]
[    0.831197] e820: reserve RAM buffer [mem 0xdd4c1000-0xdfffffff]
[    0.831197] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.831198] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
[    0.831252] NetLabel: Initializing
[    0.831252] NetLabel:  domain hash size = 128
[    0.831253] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.831263] NetLabel:  unlabeled traffic allowed by default
[    0.831311] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.831313] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.833355] clocksource: Switched to clocksource hpet
[    0.839711] VFS: Disk quotas dquot_6.6.0
[    0.839726] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.839775] pnp: PnP ACPI init
[    0.839846] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.839849] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.839891] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.839951] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.840099] system 00:03: [io  0x0a00-0x0a0f] has been reserved
[    0.840100] system 00:03: [io  0x0a10-0x0a1f] has been reserved
[    0.840101] system 00:03: [io  0x0a20-0x0a2f] has been reserved
[    0.840102] system 00:03: [io  0x0a40-0x0a4f] has been reserved
[    0.840104] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.840307] pnp 00:04: [dma 0 disabled]
[    0.840377] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.840540] pnp 00:05: [dma 0 disabled]
[    0.840565] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.840705] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.840706] system 00:06: [io  0x040b] has been reserved
[    0.840706] system 00:06: [io  0x04d6] has been reserved
[    0.840707] system 00:06: [io  0x0c00-0x0c01] has been reserved
[    0.840708] system 00:06: [io  0x0c14] has been reserved
[    0.840709] system 00:06: [io  0x0c50-0x0c51] has been reserved
[    0.840710] system 00:06: [io  0x0c52] has been reserved
[    0.840710] system 00:06: [io  0x0c6c] has been reserved
[    0.840711] system 00:06: [io  0x0c6f] has been reserved
[    0.840712] system 00:06: [io  0x0cd0-0x0cd1] has been reserved
[    0.840713] system 00:06: [io  0x0cd2-0x0cd3] has been reserved
[    0.840713] system 00:06: [io  0x0cd4-0x0cd5] has been reserved
[    0.840714] system 00:06: [io  0x0cd6-0x0cd7] has been reserved
[    0.840715] system 00:06: [io  0x0cd8-0x0cdf] has been reserved
[    0.840716] system 00:06: [io  0x0800-0x089f] has been reserved
[    0.840716] system 00:06: [io  0x0b00-0x0b0f] has been reserved
[    0.840717] system 00:06: [io  0x0b20-0x0b3f] has been reserved
[    0.840718] system 00:06: [io  0x0900-0x090f] has been reserved
[    0.840719] system 00:06: [io  0x0910-0x091f] has been reserved
[    0.840720] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.840721] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.840722] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.840723] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.840724] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.840725] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.840726] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.840727] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.840953] pnp: PnP ACPI: found 7 devices
[    0.847346] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.847410] pci 0000:1f:00.0: PCI bridge to [bus 20]
[    0.847430] pci 0000:04:00.0: PCI bridge to [bus 1f-20]
[    0.847439] pci 0000:04:01.0: PCI bridge to [bus 21]
[    0.847440] pci 0000:04:01.0:   bridge window [io  0xf000-0xffff]
[    0.847444] pci 0000:04:01.0:   bridge window [mem 0xfd300000-0xfd3fffff]
[    0.847450] pci 0000:04:04.0: PCI bridge to [bus 22]
[    0.847452] pci 0000:04:04.0:   bridge window [io  0xe000-0xefff]
[    0.847455] pci 0000:04:04.0:   bridge window [mem 0xfc000000-0xfd0fffff]
[    0.847458] pci 0000:04:04.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.847462] pci 0000:04:06.0: PCI bridge to [bus 23]
[    0.847465] pci 0000:04:06.0:   bridge window [mem 0xfd200000-0xfd2fffff]
[    0.847471] pci 0000:04:07.0: PCI bridge to [bus 24]
[    0.847480] pci 0000:03:00.2: PCI bridge to [bus 04-24]
[    0.847481] pci 0000:03:00.2:   bridge window [io  0xe000-0xffff]
[    0.847484] pci 0000:03:00.2:   bridge window [mem 0xfc000000-0xfd3fffff]
[    0.847487] pci 0000:03:00.2:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.847491] pci 0000:00:01.3: PCI bridge to [bus 03-24]
[    0.847492] pci 0000:00:01.3:   bridge window [io  0xe000-0xffff]
[    0.847494] pci 0000:00:01.3:   bridge window [mem 0xfc000000-0xfd4fffff]
[    0.847495] pci 0000:00:01.3:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.847498] pci 0000:00:07.1: PCI bridge to [bus 25]
[    0.847500] pci 0000:00:07.1:   bridge window [mem 0xfd600000-0xfd8fffff]
[    0.847503] pci 0000:00:08.1: PCI bridge to [bus 26]
[    0.847505] pci 0000:00:08.1:   bridge window [mem 0xfd900000-0xfd9fffff]
[    0.847510] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.847510] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.847511] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.847512] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.847513] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.847513] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.847514] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[    0.847515] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.847516] pci_bus 0000:03: resource 0 [io  0xe000-0xffff]
[    0.847516] pci_bus 0000:03: resource 1 [mem 0xfc000000-0xfd4fffff]
[    0.847517] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.847518] pci_bus 0000:04: resource 0 [io  0xe000-0xffff]
[    0.847519] pci_bus 0000:04: resource 1 [mem 0xfc000000-0xfd3fffff]
[    0.847519] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.847520] pci_bus 0000:21: resource 0 [io  0xf000-0xffff]
[    0.847521] pci_bus 0000:21: resource 1 [mem 0xfd300000-0xfd3fffff]
[    0.847522] pci_bus 0000:22: resource 0 [io  0xe000-0xefff]
[    0.847523] pci_bus 0000:22: resource 1 [mem 0xfc000000-0xfd0fffff]
[    0.847523] pci_bus 0000:22: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.847524] pci_bus 0000:23: resource 1 [mem 0xfd200000-0xfd2fffff]
[    0.847525] pci_bus 0000:25: resource 1 [mem 0xfd600000-0xfd8fffff]
[    0.847526] pci_bus 0000:26: resource 1 [mem 0xfd900000-0xfd9fffff]
[    0.847575] NET: Registered protocol family 2
[    0.847703] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.847848] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.847958] TCP: Hash tables configured (established 131072 bind 65536)
[    0.847990] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.848024] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.848088] NET: Registered protocol family 1
[    0.848219] pci 0000:22:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.848313] PCI: CLS 64 bytes, default 64
[    0.848336] Unpacking initramfs...
[    0.923180] Freeing initrd memory: 7772K
[    0.923287] AMD-Vi: Lazy IO/TLB flushing enabled
[    0.924044] amd_uncore: AMD NB counters detected
[    0.924046] amd_uncore: AMD LLC counters detected
[    0.924455] Scanning for low memory corruption every 60 seconds
[    0.924887] Initialise system trusted keyrings
[    0.924895] Key type blacklist registered
[    0.924948] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.925588] zbud: loaded
[    0.926420] Key type asymmetric registered
[    0.926428] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.926477] io scheduler noop registered
[    0.926477] io scheduler deadline registered
[    0.926494] io scheduler cfq registered (default)
[    0.926494] io scheduler mq-deadline registered
[    0.926495] io scheduler kyber registered
[    0.926510] io scheduler bfq registered
[    0.927469] pcieport 0000:00:01.3: AER enabled with IRQ 25
[    0.927477] pcieport 0000:00:01.3: Signaling PME with IRQ 25
[    0.927485] pcieport 0000:00:07.1: Signaling PME with IRQ 26
[    0.927499] pcieport 0000:00:08.1: Signaling PME with IRQ 28
[    0.927512] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    0.927512] vesafb: scrolling: redraw
[    0.927513] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.927520] vesafb: framebuffer at 0xf1000000, mapped to 0xffffb8edc2800000, using 8128k, total 8128k
[    1.028182] Console: switching to colour frame buffer device 240x67
[    1.128305] fb0: VESA VGA frame buffer device
[    1.132509] GHES: HEST is not enabled!
[    1.132572] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.153482] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.153844] Linux agpgart interface v0.103
[    1.154611] rtc_cmos 00:02: RTC can wake from S4
[    1.154812] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.154860] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.155115] ledtrig-cpu: registered to indicate activity on CPUs
[    1.155145] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    1.155280] NET: Registered protocol family 10
[    1.157384] Segment Routing with IPv6
[    1.157394] NET: Registered protocol family 17
[    1.157885] RAS: Correctable Errors collector initialized.
[    1.167103] microcode: CPU0: patch_level=0x08001129
[    1.167110] microcode: CPU1: patch_level=0x08001129
[    1.167112] microcode: CPU2: patch_level=0x08001129
[    1.167118] microcode: CPU3: patch_level=0x08001129
[    1.167126] microcode: CPU4: patch_level=0x08001129
[    1.167133] microcode: CPU5: patch_level=0x08001129
[    1.167142] microcode: CPU6: patch_level=0x08001129
[    1.167150] microcode: CPU7: patch_level=0x08001129
[    1.167158] microcode: CPU8: patch_level=0x08001129
[    1.167165] microcode: CPU9: patch_level=0x08001129
[    1.167174] microcode: CPU10: patch_level=0x08001129
[    1.167181] microcode: CPU11: patch_level=0x08001129
[    1.167221] microcode: Microcode Update Driver: v2.2.
[    1.167353] registered taskstats version 1
[    1.167356] Loading compiled-in X.509 certificates
[    1.167368] zswap: loaded using pool lzo/zbud
[    1.167768]   Magic number: 1:964:146
[    1.167792] acpi PNP0C02:14: hash matches
[    1.167805] acpi device:17: hash matches
[    1.167897] rtc_cmos 00:02: setting system clock to 2017-09-22 21:08:41 UTC (1506114521)
[    1.168283] PM: Checking hibernation image partition UUID=2b4886e2-8af5-4c6e-8977-08428632ce3f
[    1.168285] PM: Hibernation image not present or could not be loaded.
[    1.169443] Freeing unused kernel memory: 1324K
[    1.169444] Write protecting the kernel read-only data: 10240k
[    1.169778] Freeing unused kernel memory: 1636K
[    1.210317] i8042: PNP: No PS/2 controller found.
[    1.212839] SCSI subsystem initialized
[    1.213324] ACPI: bus type USB registered
[    1.213336] usbcore: registered new interface driver usbfs
[    1.213341] usbcore: registered new interface driver hub
[    1.213385] usbcore: registered new device driver usb
[    1.214016] libata version 3.00 loaded.
[    1.214659] QUIRK: Enable AMD PLL fix
[    1.214675] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.214680] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[    1.270015] xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x08000418
[    1.270200] hub 1-0:1.0: USB hub found
[    1.270211] hub 1-0:1.0: 10 ports detected
[    1.270416] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.270418] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    1.270445] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.270521] hub 2-0:1.0: USB hub found
[    1.270527] hub 2-0:1.0: 4 ports detected
[    1.270645] ahci 0000:03:00.1: version 3.0
[    1.270746] xhci_hcd 0000:25:00.3: xHCI Host Controller
[    1.270749] xhci_hcd 0000:25:00.3: new USB bus registered, assigned bus number 3
[    1.270798] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
[    1.270830] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[    1.270832] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    1.270847] xhci_hcd 0000:25:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000418
[    1.270985] hub 3-0:1.0: USB hub found
[    1.270990] hub 3-0:1.0: 4 ports detected
[    1.271134] xhci_hcd 0000:25:00.3: xHCI Host Controller
[    1.271135] xhci_hcd 0000:25:00.3: new USB bus registered, assigned bus number 4
[    1.271144] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.271243] hub 4-0:1.0: USB hub found
[    1.271248] hub 4-0:1.0: 4 ports detected
[    1.271383] scsi host0: ahci
[    1.271518] scsi host1: ahci
[    1.271648] scsi host2: ahci
[    1.271771] scsi host3: ahci
[    1.271918] scsi host4: ahci
[    1.272035] scsi host5: ahci
[    1.272142] scsi host6: ahci
[    1.272243] scsi host7: ahci
[    1.272270] ata1: SATA max UDMA/133 abar m131072@0xfd480000 port 0xfd480100 irq 41
[    1.272271] ata2: SATA max UDMA/133 abar m131072@0xfd480000 port 0xfd480180 irq 41
[    1.272272] ata3: DUMMY
[    1.272272] ata4: DUMMY
[    1.272274] ata5: SATA max UDMA/133 abar m131072@0xfd480000 port 0xfd480300 irq 41
[    1.272275] ata6: SATA max UDMA/133 abar m131072@0xfd480000 port 0xfd480380 irq 41
[    1.272276] ata7: DUMMY
[    1.272276] ata8: DUMMY
[    1.272383] ahci 0000:26:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    1.272385] ahci 0000:26:00.2: flags: 64bit ncq sntf ilck led clo only pmp fbs pio 
[    1.272515] scsi host8: ahci
[    1.272542] ata9: SATA max UDMA/133 abar m4096@0xfd908000 port 0xfd908100 irq 44
[    1.297163] i8042: PNP: No PS/2 controller found.
[    1.586533] ata9: SATA link down (SStatus 0 SControl 300)
[    1.646727] usb 1-8: new full-speed USB device number 2 using xhci_hcd
[    1.743402] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.744492] ata1.00: ATAPI: HL-DT-ST DVDRAM GH24NSD1, LB00, max UDMA/133
[    1.745901] ata1.00: configured for UDMA/133
[    1.748237] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH24NSD1  LB00 PQ: 0 ANSI: 5
[    1.946732] tsc: Refined TSC clocksource calibration: 3200.000 MHz
[    1.946739] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e204a37a46, max_idle_ns: 440795338293 ns
[    2.077560] hidraw: raw HID events driver (C) Jiri Kosina
[    2.201964] usbcore: registered new interface driver usbhid
[    2.201965] usbhid: USB HID core driver
[    2.202352] input: E-Signal USB Gaming Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8:1.0/0003:04D9:A09F.0001/input/input0
[    2.202387] hid-generic 0003:04D9:A09F.0001: input,hidraw0: USB HID v1.10 Mouse [E-Signal USB Gaming Mouse] on usb-0000:03:00.0-8/input0
[    2.202525] input: E-Signal USB Gaming Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8:1.1/0003:04D9:A09F.0002/input/input1
[    2.230080] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.230758] ata2.00: ATA-9: KingDian S400 120GB, Q0526A, max UDMA/133
[    2.230760] ata2.00: 234441648 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[    2.231180] ata2.00: configured for UDMA/133
[    2.231373] scsi 1:0:0:0: Direct-Access     ATA      KingDian S400 12 6A   PQ: 0 ANSI: 5
[    2.246742] usb 1-9: new low-speed USB device number 3 using xhci_hcd
[    2.256820] hid-generic 0003:04D9:A09F.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [E-Signal USB Gaming Mouse] on usb-0000:03:00.0-8/input1
[    2.256928] hid-generic 0003:04D9:A09F.0003: hiddev1,hidraw2: USB HID v1.10 Device [E-Signal USB Gaming Mouse] on usb-0000:03:00.0-8/input2
[    2.643128] input:   USB Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9:1.0/0003:05AF:8277.0004/input/input2
[    2.696781] hid-generic 0003:05AF:8277.0004: input,hidraw3: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:03:00.0-9/input0
[    2.727290] input:   USB Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9:1.1/0003:05AF:8277.0005/input/input3
[    2.740090] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.741685] ata5.00: supports DRM functions and may not be fully accessible
[    2.742285] ata5.00: disabling queued TRIM support
[    2.742286] ata5.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
[    2.742287] ata5.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.742918] ata5.00: supports DRM functions and may not be fully accessible
[    2.743467] ata5.00: disabling queued TRIM support
[    2.743843] ata5.00: configured for UDMA/133
[    2.743998] scsi 4:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
[    2.783453] hid-generic 0003:05AF:8277.0005: input,hidraw4: USB HID v1.10 Device [  USB Keyboard] on usb-0000:03:00.0-9/input1
[    2.960180] clocksource: Switched to clocksource tsc
[    3.270084] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.270636] ata6.00: ATA-10: WDC WD10EZEX-08WN4A0, 01.01A01, max UDMA/100
[    3.270637] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.271202] ata6.00: configured for UDMA/100
[    3.271323] scsi 5:0:0:0: Direct-Access     ATA      WDC WD10EZEX-08W 1A01 PQ: 0 ANSI: 5
[    3.311673] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    3.311682] sd 1:0:0:0: [sda] Write Protect is off
[    3.311683] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.311694] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.311700] sd 4:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    3.311709] sd 4:0:0:0: [sdb] Write Protect is off
[    3.311710] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.311721] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.311722] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.311723] sd 5:0:0:0: [sdc] 4096-byte physical blocks
[    3.311732] sd 5:0:0:0: [sdc] Write Protect is off
[    3.311734] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    3.311755] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.312732]  sda: sda1 sda2 sda3 < sda5 >
[    3.312940] sd 1:0:0:0: [sda] Attached SCSI disk
[    3.314710]  sdb: sdb1 sdb2
[    3.314878] sd 4:0:0:0: [sdb] Attached SCSI disk
[    3.326213] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.326214] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.326278] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    3.344054] random: fast init done
[    3.362803]  sdc: sdc1 sdc2
[    3.362983] sd 5:0:0:0: [sdc] Attached SCSI disk
[    3.562646] PM: Starting manual resume from disk
[    3.562647] PM: Hibernation image partition 8:5 present
[    3.562648] PM: Looking for hibernation image.
[    3.562808] PM: Image not found (code -22)
[    3.562809] PM: Hibernation image not present or could not be loaded.
[    3.596109] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.675291] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    3.690073] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.695753] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    3.695947] systemd[1]: Detected architecture x86-64.
[    3.696911] systemd[1]: Set hostname to <LaStanzaRossa>.
[    3.762046] systemd[1]: Listening on udev Kernel Socket.
[    3.762097] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.762105] systemd[1]: Reached target Remote File Systems.
[    3.762126] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.762132] systemd[1]: Reached target Encrypted Volumes.
[    3.762152] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.762160] systemd[1]: Reached target Login Prompts.
[    3.773587] EXT4-fs (sda2): re-mounted. Opts: discard
[    3.775556] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    3.775579] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    3.775601] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    3.775622] sd 5:0:0:0: Attached scsi generic sg3 type 0
[    3.806494] systemd-journald[273]: Received request to flush runtime journal from PID 1
[    3.811108] systemd-journald[273]: File /var/log/journal/6e04d7f301cc4a9f93a0d10680cd6163/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    3.873026] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[    3.873032] ACPI: Power Button [PWRB]
[    3.873090] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    3.873091] ACPI: Power Button [PWRF]
[    3.877545] acpi_cpufreq: overriding BIOS provided _PSD data
[    3.881074] wmi: Mapper loaded
[    3.894047] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.895037] parport_pc 00:04: reported by Plug and Play ACPI
[    3.895125] parport0: PC-style at 0x378, irq 5 [PCSPP]
[    3.895779] i8042: PNP: No PS/2 controller found.
[    3.911686] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    3.911688] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
[    3.967140] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    4.007959] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    4.008076] sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x790b, Revision ID: 0x59
[    4.008079] sp5100_tco: I/O address 0x0cd6 already in use
[    4.009933] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.009948] i8042: PNP: No PS/2 controller found.
[    4.012231] fuse init (API version 7.26)
[    4.013122] ccp 0000:25:00.2: enabled
[    4.014815] AVX2 version of gcm_enc/dec engaged.
[    4.014817] AES CTR mode by8 optimization enabled
[    4.024842] r8169 0000:21:00.0 eth0: RTL8168h/8111h at 0xffffb8edc19a5000, 4c:cc:6a:f9:f2:f2, XID 14100800 IRQ 48
[    4.024846] r8169 0000:21:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    4.032263] snd_hda_intel 0000:22:00.1: Disabling MSI
[    4.032273] snd_hda_intel 0000:22:00.1: Handle vga_switcheroo audio client
[    4.035750] Adding 8196564k swap on /dev/sda5.  Priority:-1 extents:1 across:8196564k SSFS
[    4.044826] EXT4-fs (sda1): recovery complete
[    4.044830] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
[    4.053209] r8169 0000:21:00.0 enp33s0: renamed from eth0
[    4.094803] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    4.094806] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.094807] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.094809] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    4.094810] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    4.094812] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    4.094813] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    4.094815] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    4.094975] random: crng init done
[    4.096260] ppdev: user-space parallel port driver
[    4.098856] kvm: disabled by bios
[    4.100863] MCE: In-kernel MCE decoding enabled.
[    4.102109] EDAC amd64: Node 0: DRAM ECC disabled.
[    4.102111] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    4.107227] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected
[    4.110963] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5392 detected
[    4.111525] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:26:00.3/sound/card1/input7
[    4.111587] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:26:00.3/sound/card1/input8
[    4.111642] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:26:00.3/sound/card1/input9
[    4.111696] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:26:00.3/sound/card1/input10
[    4.111749] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:26:00.3/sound/card1/input11
[    4.111804] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:26:00.3/sound/card1/input12
[    4.111855] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:08.1/0000:26:00.3/sound/card1/input13
[    4.111904] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:26:00.3/sound/card1/input14
[    4.112946] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    4.116852] rt2800pci 0000:23:00.0 wlp35s0: renamed from wlan0
[    4.127614] nvidia: loading out-of-tree module taints kernel.
[    4.127619] nvidia: module license 'NVIDIA' taints kernel.
[    4.127620] Disabling lock debugging due to kernel taint
[    4.136571] nvidia-nvlink: Nvlink Core is being initialized, major device number 245
[    4.136842] nvidia 0000:22:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    4.136915] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  384.69  Wed Aug 16 19:34:54 PDT 2017 (using threaded interrupts)
[    4.190188] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  384.69  Wed Aug 16 19:39:44 PDT 2017
[    4.191022] EDAC amd64: Node 0: DRAM ECC disabled.
[    4.191023] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    4.192282] [drm] [nvidia-drm] [GPU ID 0x00002200] Loading driver
[    4.192284] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:22:00.0 on minor 0
[    4.727567] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:04:04.0/0000:22:00.1/sound/card0/input15
[    4.727653] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:04:04.0/0000:22:00.1/sound/card0/input16
[    4.727727] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:04:04.0/0000:22:00.1/sound/card0/input17
[    4.810339] IPv6: ADDRCONF(NETDEV_UP): enp33s0: link is not ready
[    4.832987] r8169 0000:21:00.0 enp33s0: link down
[    4.833071] IPv6: ADDRCONF(NETDEV_UP): enp33s0: link is not ready
[    4.836426] IPv6: ADDRCONF(NETDEV_UP): wlp35s0: link is not ready
[    4.836455] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
[    4.836616] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.40
[    4.856806] nommu_map_single: overflow 4003f204c+3872 of device mask ffffffff
[    4.857314] ieee80211 phy0: rt2x00queue_initialize: Error - Queue entries allocation failed
[    4.903456] nommu_map_single: overflow 4003f204c+3872 of device mask ffffffff                                                                                                             
[    4.903958] ieee80211 phy0: rt2x00queue_initialize: Error - Queue entries allocation failed
[    4.926798] nommu_map_single: overflow 4003f204c+3872 of device mask ffffffff                                                                                                             
[    4.927304] ieee80211 phy0: rt2x00queue_initialize: Error - Queue entries allocation failed
[    4.969515] mousedev: PS/2 mouse device common for all mice
[    6.340928] NVRM: Your system is not currently configured to drive a VGA console
               on the primary VGA device. The NVIDIA Linux graphics driver
               requires the use of a text-mode VGA console. Use of other console
               drivers including, but not limited to, vesafb, may result in
               corruption and stability problems, and is not supported.
[    6.342403] nvidia-modeset: Allocated GPU:0 (GPU-e810e568-2a12-9a2d-b456-a9bd50edd883) @ PCI:0000:22:00.0
[   15.023701] nommu_map_single: overflow 40c7c204c+3872 of device mask ffffffff
[   15.023710] ieee80211 phy0: rt2x00queue_initialize: Error - Queue entries allocation failed
[   15.043707] nommu_map_single: overflow 40c7c204c+3872 of device mask ffffffff                                                                                                             
[   15.043716] ieee80211 phy0: rt2x00queue_initialize: Error - Queue entries allocation failed
[   20.233793] usb 1-3: new high-speed USB device number 4 using xhci_hcd
[   20.970045] r8188eu: module is from the staging directory, the quality is unknown, you have been warned.
[   20.974530] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
[   21.349987] usbcore: registered new interface driver r8188eu
[   21.353188] r8188eu 1-3:1.0 wlp3s0f0u3: renamed from wlan0
[   21.374193] IPv6: ADDRCONF(NETDEV_UP): wlp3s0f0u3: link is not ready
[   34.925358] MAC Address = 14:cc:20:11:a6:92
[   35.012466] IPv6: ADDRCONF(NETDEV_UP): wlp3s0f0u3: link is not ready
[   35.153370] R8188EU: indicate disassoc
[   35.266215] IPv6: ADDRCONF(NETDEV_UP): wlp3s0f0u3: link is not ready
[   35.334144] nommu_map_single: overflow 3d4c3004c+3872 of device mask ffffffff
[   35.334153] ieee80211 phy0: rt2x00queue_initialize: Error - Queue entries allocation failed
[   35.354144] nommu_map_single: overflow 3d4c3404c+3872 of device mask ffffffff
[   35.354150] ieee80211 phy0: rt2x00queue_initialize: Error - Queue entries allocation failed
[   35.356825] IPv6: ADDRCONF(NETDEV_UP): wlp3s0f0u3: link is not ready
[   40.164679] R8188EU: assoc success
[   40.164807] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0f0u3: link becomes ready
[   46.024384] nommu_map_single: overflow 3ddf5804c+3872 of device mask ffffffff
[   46.024393] ieee80211 phy0: rt2x00queue_initialize: Error - Queue entries allocation failed
[   46.047716] nommu_map_single: overflow 3ddf5c04c+3872 of device mask ffffffff
[   46.047723] ieee80211 phy0: rt2x00queue_initialize: Error - Queue entries allocation failed
[   56.027938] nommu_map_single: overflow 3ddf5c04c+3872 of device mask ffffffff
[   56.027948] ieee80211 phy0: rt2x00queue_initialize: Error - Queue entries allocation failed
[   56.047938] nommu_map_single: overflow 3ddf5c04c+3872 of device mask ffffffff
[   56.047944] ieee80211 phy0: rt2x00queue_initialize: Error - Queue entries allocation failed
[   66.028166] nommu_map_single: overflow 3e9f7e04c+3872 of device mask ffffffff
[   66.028175] ieee80211 phy0: rt2x00queue_initialize: Error - Queue entries allocation failed
[   66.048163] nommu_map_single: overflow 3e9f7804c+3872 of device mask ffffffff
[   66.048170] ieee80211 phy0: rt2x00queue_initialize: Error - Queue entries allocation failed

I'm not able to boot with linux-lts because I get stuck at the boot with the loop of this error:

[   66.048163] nommu_map_single: overflow 3e9f7804c+3872 of device mask ffffffff
[   66.048170] ieee80211 phy0: rt2x00queue_initialize: Error - Queue entries allocation failed

Last edited by T84 (2017-09-22 19:28:11)

Offline

#6 2017-09-22 19:16:24

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,426
Website

Re: Wireless PCI card: cannot allocate memory

Use code, not quote, tags: https://wiki.archlinux.org/index.php/Co … s_and_code

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#7 2017-09-22 19:29:23

T84
Member
From: Italy
Registered: 2012-03-12
Posts: 32

Re: Wireless PCI card: cannot allocate memory

My bad, sorry. I edited my previous post.
Thanks for pointing it out.

Offline

#8 2017-09-22 19:59:40

T84
Member
From: Italy
Registered: 2012-03-12
Posts: 32

Re: Wireless PCI card: cannot allocate memory

I tried to download driver from http://www.atlantisland.it/pub/prodotti … UxLVczMDBO and to compile it but I get the following error:

sudo make
[...]
cc1: some warnings being treated as errors
make[2]: *** [scripts/Makefile.build:303: /home/team84/Desktop/os/linux/../../sta/sta_cfg.o] Error 1
make[1]: *** [Makefile:1515: _module_/home/team84/Desktop/os/linux] Error 2
make[1]: Leaving directory '/usr/lib/modules/4.12.13-1-ARCH/build'
make: *** [Makefile:373: LINUX] Error 2

Offline

#9 2017-09-23 10:02:45

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 13,347

Re: Wireless PCI card: cannot allocate memory

Seems you currently have 3 network cards :
pci - realtek ethernet
pci - ralink wlan
usb realtek wlan

post lspci -nn and lsusb , that should give pci ids so we can be certain what chipsets are used.

Some other things :

You run a ryzen processor on a MSI motherboard.
Are you using latest uefi firmware ?
Are you running stock or overclocked ?

Have you tried with 4.13 kernel ( [testing] repo or linux-mainline from aur )

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

#10 2017-09-23 17:32:53

T84
Member
From: Italy
Registered: 2012-03-12
Posts: 32

Re: Wireless PCI card: cannot allocate memory

Thanks for replies, I really appreciate it.
I'm running stock and yes, the UEFI firmware is updated.
As I said, the PCI card used to work fine before the installation of new graphic card (Nvidia 1050 Ti).

I tried to boot with 4.13 kernel (from the testing repository) but nothing changed.

$  lspci -nn
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1450]
00:01.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1452]
00:01.3 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:1453]
00:02.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1452]
00:03.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1452]
00:04.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1452]
00:07.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1452]
00:07.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:1454]
00:08.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1452]
00:08.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:1454]
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b] (rev 59)
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:790e] (rev 51)
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1460]
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1461]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1462]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1463]
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1464]
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1465]
00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1466]
00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:1467]
03:00.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] USB 3.1 XHCI Controller [1022:43bb] (rev 02)
03:00.1 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] Device [1022:43b7] (rev 02)
03:00.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43b2] (rev 02)
04:00.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43b4] (rev 02)
04:01.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43b4] (rev 02)
04:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43b4] (rev 02)
04:06.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43b4] (rev 02)
04:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43b4] (rev 02)
1f:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge [1b21:1080] (rev 03)
21:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
22:00.0 VGA compatible controller [0300]: NVIDIA Corporation GP107 [GeForce GTX 1050 Ti] [10de:1c82] (rev a1)
22:00.1 Audio device [0403]: NVIDIA Corporation GP107GL High Definition Audio Controller [10de:0fb9] (rev a1)
23:00.0 Network controller [0280]: Ralink corp. RT5392 PCIe Wireless Network Adapter [1814:5392]
25:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Device [1022:145a]
25:00.2 Encryption controller [1080]: Advanced Micro Devices, Inc. [AMD] Device [1022:1456]
25:00.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] USB3 Host Controller [1022:145c]
26:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Device [1022:1455]
26:00.2 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7901] (rev 51)
26:00.3 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Device [1022:1457]

And:

$ lsusb
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 05af:8277 Jing-Mold Enterprise Co., Ltd 
Bus 001 Device 002: ID 04d9:a09f Holtek Semiconductor, Inc. 
Bus 001 Device 004: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Offline

#11 2017-09-25 11:31:15

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 13,347

Re: Wireless PCI card: cannot allocate memory

Ok, your motherboard is a B350 tomahawk aka MS-7A34 ?

according to the manual that MoBo has 4 PCI express ports and 2 PCI ports.

PCI_E2 is a PCIe v3 x16 slot and directly connected to the cpu . It's intended for graphics use.

PCI_E1  , PCI_E3 and PCI_E4 are PCIe v2 slots and are connected through the chipset .

PCI_E1 and PCI_E3 are x1 slots, while PCI_E4 is a x4 slots (it has a 16 lanes connector like PCI-E2, but can only use 4 of those lanes) .

please describe which card occupies which physical slot .

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

#12 2017-09-29 16:05:01

T84
Member
From: Italy
Registered: 2012-03-12
Posts: 32

Re: Wireless PCI card: cannot allocate memory

PCI_E1 = Ralink Wireless Card.
PCI_E4 = Graphic card, NVIDIA 1050 Ti

The previous setup was the same, just with a different graphic card in PCI_E4, a 750 Ti.

Offline

#13 2017-10-17 11:54:01

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 13,347

Re: Wireless PCI card: cannot allocate memory

Sorry for delay, i've been very busy.

Have you tried the wireless card in PCI_E3 slot or putting the nvidia card in PCI_E2 ?

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

Pages: 1

Board footer

Powered by FluxBB