You are not logged in.

Pages: 1

#1 2018-12-16 16:33:22

lenhuppe
Member
From: New Hampshire USA
Registered: 2018-12-10
Posts: 322
Website

SOLVED: i915 driver will not load

SOLUTION:

I needed the 4.20 kernel

- OP

***


I have an Intel i7 9700k cpu with an integrated UHD 630 gpu running on an MSI mobo with a Z390 chipset. It is a sweet setup and lightning fast. However I am unable to get the i915 driver to load. When I run dmesg and journalctl there is no mention of i915 at all. Its as if it doesn't even exist. When I run glxinfo I get "unable to open display"

I found a post here where someone is running an Intel i9 9900k on an Asrock with a Z390 chipset. This chip is the same series as mine and the poster got the video working by using linux-drm-tip-git from AUR. This is the post: https://bbs.archlinux.org/viewtopic.php?id=242465

I am trying the linux-drm-tip-git package but I think it requires an advanced user.

Can anyone help me troubleshoot this?

Last edited by lenhuppe (2019-05-08 01:45:52)

Offline

#2 2018-12-16 17:19:00

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,697

Re: SOLVED: i915 driver will not load

lspci
dmesg

glxinfo requires a running X11 server (and display)

Edit: you can paste from console following https://wiki.archlinux.org/index.php/Pastebin

Last edited by seth (2018-12-16 17:19:51)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2018-12-16 18:48:25

lenhuppe
Member
From: New Hampshire USA
Registered: 2018-12-10
Posts: 322
Website

Re: SOLVED: i915 driver will not load

glxinfo requires a running X11 server (and display)

Xorg and Gnome are both installed.

I now know that Xorg is failing to start.

Perhaps I need to install a driver?

Offline

#4 2018-12-16 20:02:52

loqs
Member
Registered: 2014-03-06
Posts: 19,106

Re: SOLVED: i915 driver will not load

@lenhuppe the outputs requested plus Xorg.log will help others understand what is currently occurring on the system.

Offline

#5 2018-12-16 20:49:42

lenhuppe
Member
From: New Hampshire USA
Registered: 2018-12-10
Posts: 322
Website

Re: SOLVED: i915 driver will not load

I am trying to get my xorg log file onto my MacBook so that I can post it here.

I have dropbox installed and now I have to figure out how to set it up from a command line.

Thank you so very much for being patient.

Offline

#6 2018-12-16 20:51:45

loqs
Member
Registered: 2014-03-06
Posts: 19,106

Re: SOLVED: i915 driver will not load

If the system has an internet connection please see the tip box from  List_of_applications#Pastebin_clients.

Offline

#7 2018-12-16 20:51:52

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,697

Re: SOLVED: i915 driver will not load

You don't need your macbook or whatever, see the link I posted in comment #2
Also include the output of the commands requested in that post.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#8 2018-12-16 20:59:36

lenhuppe
Member
From: New Hampshire USA
Registered: 2018-12-10
Posts: 322
Website

Re: SOLVED: i915 driver will not load

$ lspci

00:00.0 Host bridge: Intel Corporation Device 3e30 (rev 0a)
00:02.0 VGA compatible controller: Intel Corporation Device 3e98
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model
00:12.0 Signal processing controller: Intel Corporation Cannon Lake PCH Thermal Controller (rev 10)
00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10)
00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10)
00:14.3 Network controller: Intel Corporation Wireless-AC 9560 [Jefferson Peak] (rev 10)
00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10)
00:17.0 SATA controller: Intel Corporation Cannon Lake PCH SATA AHCI Controller (rev 10)
00:1b.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #17 (rev f0)
00:1b.4 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #21 (rev f0)
00:1d.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #9 (rev f0)
00:1f.0 ISA bridge: Intel Corporation Device a305 (rev 10)
00:1f.4 SMBus: Intel Corporation Cannon Lake PCH SMBus Controller (rev 10)
00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH SPI Controller (rev 10)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (7) I219-V (rev 10)
6d:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981

Last edited by lenhuppe (2018-12-16 21:24:15)

Offline

#9 2018-12-16 21:01:02

lenhuppe
Member
From: New Hampshire USA
Registered: 2018-12-10
Posts: 322
Website

Re: SOLVED: i915 driver will not load

$ dmesg

[    0.000000] Linux version 4.19.8-arch1-1-ARCH (builduser@heftig-1129) (gcc version 8.2.1 20181127 (GCC)) #1 SMP PREEMPT Sat Dec 8 13:49:11 UTC 2018
[    0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/nvme0n1p3 rw elevator=mq-deadline
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000005efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000005f000-0x000000000005ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000060000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000248f4fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000248f5000-0x00000000248f5fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000248f6000-0x00000000248f6fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000248f7000-0x000000003990efff] usable
[    0.000000] BIOS-e820: [mem 0x000000003990f000-0x0000000039d8efff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000039d8f000-0x0000000039f5dfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000039f5e000-0x000000003a31efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003a31f000-0x000000003aefefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003aeff000-0x000000003aefffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003af00000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004beffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x21e6c018-0x21e7c057] usable ==> usable
[    0.000000] e820: update [mem 0x21e6c018-0x21e7c057] usable ==> usable
[    0.000000] e820: update [mem 0x21e5a018-0x21e6b857] usable ==> usable
[    0.000000] e820: update [mem 0x21e5a018-0x21e6b857] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000005efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000005f000-0x000000000005ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000060000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000021e5a017] usable
[    0.000000] reserve setup_data: [mem 0x0000000021e5a018-0x0000000021e6b857] usable
[    0.000000] reserve setup_data: [mem 0x0000000021e6b858-0x0000000021e6c017] usable
[    0.000000] reserve setup_data: [mem 0x0000000021e6c018-0x0000000021e7c057] usable
[    0.000000] reserve setup_data: [mem 0x0000000021e7c058-0x00000000248f4fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000248f5000-0x00000000248f5fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000248f6000-0x00000000248f6fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000248f7000-0x000000003990efff] usable
[    0.000000] reserve setup_data: [mem 0x000000003990f000-0x0000000039d8efff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000039d8f000-0x0000000039f5dfff] usable
[    0.000000] reserve setup_data: [mem 0x0000000039f5e000-0x000000003a31efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000003a31f000-0x000000003aefefff] reserved
[    0.000000] reserve setup_data: [mem 0x000000003aeff000-0x000000003aefffff] usable
[    0.000000] reserve setup_data: [mem 0x000000003af00000-0x000000003fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004beffffff] usable
[    0.000000] efi: EFI v2.70 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0x3a270000  ACPI=0x3a270000  SMBIOS=0x3ac18000  MEMATTR=0x36c45018  MPS=0xfcb30  ESRT=0x3667f598 
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Micro-Star International Co., Ltd. MS-7B17/MPG Z390 GAMING PRO CARBON AC (MS-7B17), BIOS 1.00 09/03/2018
[    0.000000] tsc: Detected 3600.000 MHz processor
[    0.001352] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001353] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001359] last_pfn = 0x4bf000 max_arch_pfn = 0x400000000
[    0.001361] MTRR default type: write-back
[    0.001361] MTRR fixed ranges enabled:
[    0.001362]   00000-9FFFF write-back
[    0.001363]   A0000-BFFFF uncachable
[    0.001363]   C0000-FFFFF write-protect
[    0.001364] MTRR variable ranges enabled:
[    0.001365]   0 base 0080000000 mask 7F80000000 uncachable
[    0.001365]   1 base 0040000000 mask 7FC0000000 uncachable
[    0.001366]   2 base 003C000000 mask 7FFC000000 uncachable
[    0.001366]   3 base 003B800000 mask 7FFF800000 uncachable
[    0.001367]   4 disabled
[    0.001367]   5 disabled
[    0.001367]   6 disabled
[    0.001368]   7 disabled
[    0.001368]   8 disabled
[    0.001368]   9 disabled
[    0.002298] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002443] last_pfn = 0x3af00 max_arch_pfn = 0x400000000
[    0.007829] found SMP MP-table at [mem 0x000fcdb0-0x000fcdbf] mapped at [(____ptrval____)]
[    0.007841] esrt: Reserving ESRT space from 0x000000003667f598 to 0x000000003667f5d0.
[    0.007851] Scanning 1 areas for low memory corruption
[    0.007853] Base memory trampoline at [(____ptrval____)] 96000 size 24576
[    0.007855] Using GB pages for direct mapping
[    0.007856] BRK [0x4ab201000, 0x4ab201fff] PGTABLE
[    0.007858] BRK [0x4ab202000, 0x4ab202fff] PGTABLE
[    0.007858] BRK [0x4ab203000, 0x4ab203fff] PGTABLE
[    0.007889] BRK [0x4ab204000, 0x4ab204fff] PGTABLE
[    0.007890] BRK [0x4ab205000, 0x4ab205fff] PGTABLE
[    0.008026] BRK [0x4ab206000, 0x4ab206fff] PGTABLE
[    0.008107] BRK [0x4ab207000, 0x4ab207fff] PGTABLE
[    0.008141] BRK [0x4ab208000, 0x4ab208fff] PGTABLE
[    0.008142] BRK [0x4ab209000, 0x4ab209fff] PGTABLE
[    0.008173] BRK [0x4ab20a000, 0x4ab20afff] PGTABLE
[    0.008228] Secure boot disabled
[    0.008228] RAMDISK: [mem 0x21e7d000-0x22773fff]
[    0.008237] ACPI: Early table checksum verification disabled
[    0.008239] ACPI: RSDP 0x000000003A270000 000024 (v02 ALASKA)
[    0.008242] ACPI: XSDT 0x000000003A2700A0 0000BC (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.008246] ACPI: FACP 0x000000003A2B22F8 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.008249] ACPI: DSDT 0x000000003A2701F0 042107 (v02 ALASKA A M I    01072009 INTL 20160527)
[    0.008251] ACPI: FACS 0x000000003A31E080 000040
[    0.008254] ACPI: APIC 0x000000003A2B2410 0000BC (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.008256] ACPI: FPDT 0x000000003A2B24D0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.008257] ACPI: FIDT 0x000000003A2B2518 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.008259] ACPI: MCFG 0x000000003A2B25B8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.008261] ACPI: SSDT 0x000000003A2B25F8 000378 (v01 SataRe SataTabl 00001000 INTL 20160527)
[    0.008263] ACPI: SSDT 0x000000003A2B2970 0017D5 (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
[    0.008265] ACPI: SSDT 0x000000003A2B4148 0031C8 (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
[    0.008267] ACPI: HPET 0x000000003A2B7310 000038 (v01 INTEL  A M I    00000002      01000013)
[    0.008269] ACPI: SSDT 0x000000003A2B7348 000F9E (v02 INTEL  Ther_Rvp 00001000 INTL 20160527)
[    0.008271] ACPI: SSDT 0x000000003A2B82E8 002951 (v02 INTEL  xh_cfsd4 00000000 INTL 20160527)
[    0.008273] ACPI: UEFI 0x000000003A2BAC40 000048 (v01 ALASKA A M I    00000002      01000013)
[    0.008275] ACPI: LPIT 0x000000003A2BAC88 00005C (v01 INTEL  A M I    00000002      01000013)
[    0.008277] ACPI: SSDT 0x000000003A2BACE8 0027DE (v02 INTEL  PtidDevc 00001000 INTL 20160527)
[    0.008279] ACPI: SSDT 0x000000003A2BD4C8 000FFE (v02 INTEL  TbtTypeC 00000000 INTL 20160527)
[    0.008281] ACPI: DBGP 0x000000003A2BE4C8 000034 (v01 ALASKA A M I    00000002      01000013)
[    0.008282] ACPI: DBG2 0x000000003A2BE500 000054 (v00 ALASKA A M I    00000002      01000013)
[    0.008284] ACPI: SSDT 0x000000003A2BE558 000144 (v02 Intel  ADebTabl 00001000 INTL 20160527)
[    0.008286] ACPI: WSMT 0x000000003A2BE6A0 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.008293] ACPI: Local APIC address 0xfee00000
[    0.008564] No NUMA configuration found
[    0.008565] Faking a node at [mem 0x0000000000000000-0x00000004beffffff]
[    0.008567] NODE_DATA(0) allocated [mem 0x4beffc000-0x4beffffff]
[    0.008583] Zone ranges:
[    0.008584]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.008585]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.008586]   Normal   [mem 0x0000000100000000-0x00000004beffffff]
[    0.008587]   Device   empty
[    0.008587] Movable zone start for each node
[    0.008588] Early memory node ranges
[    0.008588]   node   0: [mem 0x0000000000001000-0x000000000005efff]
[    0.008589]   node   0: [mem 0x0000000000060000-0x000000000009ffff]
[    0.008589]   node   0: [mem 0x0000000000100000-0x00000000248f4fff]
[    0.008590]   node   0: [mem 0x00000000248f7000-0x000000003990efff]
[    0.008590]   node   0: [mem 0x0000000039d8f000-0x0000000039f5dfff]
[    0.008590]   node   0: [mem 0x000000003aeff000-0x000000003aefffff]
[    0.008591]   node   0: [mem 0x0000000100000000-0x00000004beffffff]
[    0.008846] Reserved but unavailable: 25989 pages
[    0.008847] Initmem setup node 0 [mem 0x0000000000001000-0x00000004beffffff]
[    0.008848] On node 0 totalpages: 4164219
[    0.008849]   DMA zone: 64 pages used for memmap
[    0.008849]   DMA zone: 26 pages reserved
[    0.008850]   DMA zone: 3998 pages, LIFO batch:0
[    0.008905]   DMA32 zone: 3628 pages used for memmap
[    0.008906]   DMA32 zone: 232157 pages, LIFO batch:63
[    0.013613]   Normal zone: 61376 pages used for memmap
[    0.013613]   Normal zone: 3928064 pages, LIFO batch:63
[    0.065405] ACPI: PM-Timer IO Port: 0x1808
[    0.065406] ACPI: Local APIC address 0xfee00000
[    0.065411] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.065412] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.065412] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.065412] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.065413] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.065413] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.065413] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.065414] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.065466] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.065467] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.065468] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.065469] ACPI: IRQ0 used by override.
[    0.065470] ACPI: IRQ9 used by override.
[    0.065471] Using ACPI (MADT) for SMP configuration information
[    0.065472] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.065475] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.065486] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.065487] PM: Registered nosave memory: [mem 0x0005f000-0x0005ffff]
[    0.065488] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.065489] PM: Registered nosave memory: [mem 0x21e5a000-0x21e5afff]
[    0.065490] PM: Registered nosave memory: [mem 0x21e6b000-0x21e6bfff]
[    0.065490] PM: Registered nosave memory: [mem 0x21e6c000-0x21e6cfff]
[    0.065491] PM: Registered nosave memory: [mem 0x21e7c000-0x21e7cfff]
[    0.065492] PM: Registered nosave memory: [mem 0x248f5000-0x248f5fff]
[    0.065493] PM: Registered nosave memory: [mem 0x248f6000-0x248f6fff]
[    0.065493] PM: Registered nosave memory: [mem 0x3990f000-0x39d8efff]
[    0.065494] PM: Registered nosave memory: [mem 0x39f5e000-0x3a31efff]
[    0.065495] PM: Registered nosave memory: [mem 0x3a31f000-0x3aefefff]
[    0.065496] PM: Registered nosave memory: [mem 0x3af00000-0x3fffffff]
[    0.065496] PM: Registered nosave memory: [mem 0x40000000-0xdfffffff]
[    0.065496] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.065497] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.065497] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.065498] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.065498] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.065498] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.065499] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.065499] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.065499] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.065501] [mem 0x40000000-0xdfffffff] available for PCI devices
[    0.065502] Booting paravirtualized kernel on bare hardware
[    0.065504] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.138652] random: get_random_bytes called from start_kernel+0x95/0x545 with crng_init=0
[    0.138656] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.138775] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144
[    0.138779] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.138780] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.138793] Built 1 zonelists, mobility grouping on.  Total pages: 4099125
[    0.138793] Policy zone: Normal
[    0.138794] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/nvme0n1p3 rw elevator=mq-deadline
[    0.141366] Calgary: detecting Calgary via BIOS EBDA area
[    0.141367] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.166860] Memory: 15977516K/16656876K available (12300K kernel code, 1374K rwdata, 3640K rodata, 1532K init, 3860K bss, 679360K reserved, 0K cma-reserved)
[    0.166927] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.166931] ftrace: allocating 35548 entries in 139 pages
[    0.176708] rcu: Preemptible hierarchical RCU implementation.
[    0.176709] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.176709] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.176710] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.176710] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.176711] 	Tasks RCU enabled.
[    0.176711] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.177643] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[    0.177876] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.178015] Console: colour dummy device 80x25
[    0.178018] console [tty0] enabled
[    0.178028] ACPI: Core revision 20180810
[    0.178346] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.178385] hpet clockevent registered
[    0.178436] APIC: Switch to symmetric I/O mode setup
[    0.180477] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.187287] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.201735] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e452fbb2f, max_idle_ns: 440795236593 ns
[    0.201743] Calibrating delay loop (skipped), value calculated using timer frequency.. 7202.00 BogoMIPS (lpj=12000000)
[    0.201744] pid_max: default: 32768 minimum: 301
[    0.202422] Security Framework initialized
[    0.202423] Yama: becoming mindful.
[    0.202426] AppArmor: AppArmor disabled by boot time parameter
[    0.203751] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.204421] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.204448] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.204469] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.204607] mce: CPU supports 14 MCE banks
[    0.204614] CPU0: Thermal monitoring enabled (TM1)
[    0.204634] process: using mwait in idle threads
[    0.204636] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.204636] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.204637] Spectre V2 : Mitigation: Full generic retpoline
[    0.204638] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.204638] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.204642] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.204642] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.204810] Freeing SMP alternatives memory: 28K
[    0.215762] TSC deadline timer enabled
[    0.215767] smpboot: CPU0: Intel(R) Core(TM) i7-9700K CPU @ 3.60GHz (family: 0x6, model: 0x9e, stepping: 0xc)
[    0.235074] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.235097] ... version:                4
[    0.235097] ... bit width:              48
[    0.235098] ... generic registers:      8
[    0.235098] ... value mask:             0000ffffffffffff
[    0.235099] ... max period:             00007fffffffffff
[    0.235099] ... fixed-purpose events:   3
[    0.235099] ... event mask:             00000007000000ff
[    0.241738] rcu: Hierarchical SRCU implementation.
[    0.265147] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.271741] smp: Bringing up secondary CPUs ...
[    0.311745] x86: Booting SMP configuration:
[    0.311746] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.552428] smp: Brought up 1 node, 8 CPUs
[    0.552428] smpboot: Max logical packages: 1
[    0.552428] smpboot: Total of 8 processors activated (57623.00 BogoMIPS)
[    0.555322] devtmpfs: initialized
[    0.555322] x86/mm: Memory block size: 128MB
[    0.555823] PM: Registering ACPI NVS region [mem 0x248f5000-0x248f5fff] (4096 bytes)
[    0.555823] PM: Registering ACPI NVS region [mem 0x39f5e000-0x3a31efff] (3936256 bytes)
[    0.555823] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.555823] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.555823] pinctrl core: initialized pinctrl subsystem
[    0.555823] RTC time: 19:50:20, date: 12/16/18
[    0.555823] NET: Registered protocol family 16
[    0.555823] audit: initializing netlink subsys (disabled)
[    0.555823] audit: type=2000 audit(1544989819.379:1): state=initialized audit_enabled=0 res=1
[    0.558407] cpuidle: using governor ladder
[    0.558410] cpuidle: using governor menu
[    0.558423] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.558424] ACPI: bus type PCI registered
[    0.558425] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.558495] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.558497] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.558505] PCI: Using configuration type 1 for base access
[    0.559158] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.559158] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.559158] ACPI: Added _OSI(Module Device)
[    0.559158] ACPI: Added _OSI(Processor Device)
[    0.559158] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.559158] ACPI: Added _OSI(Processor Aggregator Device)
[    0.559158] ACPI: Added _OSI(Linux-Dell-Video)
[    0.559158] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.615185] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.631889] ACPI: Dynamic OEM Table Load:
[    0.631894] ACPI: SSDT 0xFFFF9C88AC553800 00078C (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.632402] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.633781] ACPI: Dynamic OEM Table Load:
[    0.633785] ACPI: SSDT 0xFFFF9C88AC0E9000 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.634181] ACPI: Dynamic OEM Table Load:
[    0.634184] ACPI: SSDT 0xFFFF9C88AC2E5800 00011B (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)
[    0.634524] ACPI: Dynamic OEM Table Load:
[    0.634527] ACPI: SSDT 0xFFFF9C88AC552000 000724 (v02 PmRef  HwpLvt   00003000 INTL 20160527)
[    0.635204] ACPI: Dynamic OEM Table Load:
[    0.635209] ACPI: SSDT 0xFFFF9C88AC0E0000 000EF1 (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.636245] ACPI: Dynamic OEM Table Load:
[    0.636248] ACPI: SSDT 0xFFFF9C88AC0EA400 000317 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    0.636659] ACPI: Dynamic OEM Table Load:
[    0.636662] ACPI: SSDT 0xFFFF9C88AC0EE000 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.640594] ACPI: Interpreter enabled
[    0.640628] ACPI: (supports S0 S3 S4 S5)
[    0.640628] ACPI: Using IOAPIC for interrupt routing
[    0.640659] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.641719] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.653356] ACPI: Power Resource [USBC] (on)
[    0.656202] ACPI: Power Resource [V0PR] (on)
[    0.656573] ACPI: Power Resource [V1PR] (on)
[    0.656939] ACPI: Power Resource [V2PR] (on)
[    0.665688] ACPI: Power Resource [WRST] (on)
[    0.669958] ACPI: Power Resource [FN00] (off)
[    0.670036] ACPI: Power Resource [FN01] (off)
[    0.670111] ACPI: Power Resource [FN02] (off)
[    0.670186] ACPI: Power Resource [FN03] (off)
[    0.670261] ACPI: Power Resource [FN04] (off)
[    0.670900] ACPI: Power Resource [PIN] (off)
[    0.671351] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.671355] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.671533] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER]
[    0.671702] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
[    0.671703] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.672667] PCI host bridge to bus 0000:00
[    0.672669] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.672670] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.672671] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.672672] pci_bus 0000:00: root bus resource [mem 0x40000000-0xdfffffff window]
[    0.672673] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.672674] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.672679] pci 0000:00:00.0: [8086:3e30] type 00 class 0x060000
[    0.673002] pci 0000:00:02.0: [8086:3e98] type 00 class 0x030000
[    0.673010] pci 0000:00:02.0: reg 0x10: [mem 0xcb000000-0xcbffffff 64bit]
[    0.673014] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x4fffffff 64bit pref]
[    0.673017] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.673027] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.673192] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.673200] pci 0000:00:08.0: reg 0x10: [mem 0xcc13e000-0xcc13efff 64bit]
[    0.673406] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[    0.673440] pci 0000:00:12.0: reg 0x10: [mem 0xcc13d000-0xcc13dfff 64bit]
[    0.673707] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[    0.673736] pci 0000:00:14.0: reg 0x10: [mem 0xcc120000-0xcc12ffff 64bit]
[    0.673827] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.674203] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[    0.674230] pci 0000:00:14.2: reg 0x10: [mem 0xcc136000-0xcc137fff 64bit]
[    0.674245] pci 0000:00:14.2: reg 0x18: [mem 0xcc13c000-0xcc13cfff 64bit]
[    0.675013] pci 0000:00:14.3: [8086:a370] type 00 class 0x028000
[    0.676447] pci 0000:00:14.3: reg 0x10: [mem 0xcc130000-0xcc133fff 64bit]
[    0.680787] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.681745] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[    0.681781] pci 0000:00:16.0: reg 0x10: [mem 0xcc13b000-0xcc13bfff 64bit]
[    0.681883] pci 0000:00:16.0: PME# supported from D3hot
[    0.682132] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
[    0.682158] pci 0000:00:17.0: reg 0x10: [mem 0xcc134000-0xcc135fff]
[    0.682168] pci 0000:00:17.0: reg 0x14: [mem 0xcc13a000-0xcc13a0ff]
[    0.682178] pci 0000:00:17.0: reg 0x18: [io  0x3090-0x3097]
[    0.682189] pci 0000:00:17.0: reg 0x1c: [io  0x3080-0x3083]
[    0.682199] pci 0000:00:17.0: reg 0x20: [io  0x3060-0x307f]
[    0.682209] pci 0000:00:17.0: reg 0x24: [mem 0xcc139000-0xcc1397ff]
[    0.682266] pci 0000:00:17.0: PME# supported from D3hot
[    0.682477] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400
[    0.682589] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.682796] pci 0000:00:1b.4: [8086:a32c] type 01 class 0x060400
[    0.682923] pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
[    0.682945] pci 0000:00:1b.4: PTM enabled (root), 4dns granularity
[    0.683153] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
[    0.683269] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.683288] pci 0000:00:1d.0: PTM enabled (root), 4dns granularity
[    0.683530] pci 0000:00:1f.0: [8086:a305] type 00 class 0x060100
[    0.683928] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[    0.683978] pci 0000:00:1f.4: reg 0x10: [mem 0xcc138000-0xcc1380ff 64bit]
[    0.684033] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.684227] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[    0.684249] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.684436] pci 0000:00:1f.6: [8086:15bc] type 00 class 0x020000
[    0.684493] pci 0000:00:1f.6: reg 0x10: [mem 0xcc100000-0xcc11ffff]
[    0.684728] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.684983] acpiphp: Slot [1] registered
[    0.684994] pci 0000:00:1b.0: PCI bridge to [bus 01]
[    0.685126] pci 0000:00:1b.4: PCI bridge to [bus 02-6c]
[    0.685132] pci 0000:00:1b.4:   bridge window [mem 0x9c000000-0xca0fffff]
[    0.685138] pci 0000:00:1b.4:   bridge window [mem 0x50000000-0x99ffffff 64bit pref]
[    0.685264] pci 0000:6d:00.0: [144d:a808] type 00 class 0x010802
[    0.685303] pci 0000:6d:00.0: reg 0x10: [mem 0xcc000000-0xcc003fff 64bit]
[    0.685550] pci 0000:00:1d.0: PCI bridge to [bus 6d]
[    0.685556] pci 0000:00:1d.0:   bridge window [mem 0xcc000000-0xcc0fffff]
[    0.686815] ACPI: PCI Interrupt Link [LNKA] (IRQs) *0
[    0.686846] ACPI: PCI Interrupt Link [LNKB] (IRQs) *1
[    0.686876] ACPI: PCI Interrupt Link [LNKC] (IRQs) *0
[    0.686906] ACPI: PCI Interrupt Link [LNKD] (IRQs) *0
[    0.686936] ACPI: PCI Interrupt Link [LNKE] (IRQs) *0
[    0.686965] ACPI: PCI Interrupt Link [LNKF] (IRQs) *0
[    0.686995] ACPI: PCI Interrupt Link [LNKG] (IRQs) *0
[    0.687024] ACPI: PCI Interrupt Link [LNKH] (IRQs) *0
[    0.687577] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.687577] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.687577] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.687577] vgaarb: loaded
[    0.687577] ACPI: bus type USB registered
[    0.687577] usbcore: registered new interface driver usbfs
[    0.687577] usbcore: registered new interface driver hub
[    0.687577] usbcore: registered new device driver usb
[    0.687577] pps_core: LinuxPPS API ver. 1 registered
[    0.687577] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.687577] PTP clock support registered
[    0.687577] EDAC MC: Ver: 3.0.0
[    0.687577] Registered efivars operations
[    0.705229] PCI: Using ACPI for IRQ routing
[    0.762301] PCI: pci_cache_line_size set to 64 bytes
[    0.762490] e820: reserve RAM buffer [mem 0x0005f000-0x0005ffff]
[    0.762491] e820: reserve RAM buffer [mem 0x21e5a018-0x23ffffff]
[    0.762491] e820: reserve RAM buffer [mem 0x21e6c018-0x23ffffff]
[    0.762492] e820: reserve RAM buffer [mem 0x248f5000-0x27ffffff]
[    0.762493] e820: reserve RAM buffer [mem 0x3990f000-0x3bffffff]
[    0.762493] e820: reserve RAM buffer [mem 0x39f5e000-0x3bffffff]
[    0.762494] e820: reserve RAM buffer [mem 0x3af00000-0x3bffffff]
[    0.762495] e820: reserve RAM buffer [mem 0x4bf000000-0x4bfffffff]
[    0.762546] NetLabel: Initializing
[    0.762547] NetLabel:  domain hash size = 128
[    0.762547] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.762555] NetLabel:  unlabeled traffic allowed by default
[    0.762557] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.762557] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.765070] clocksource: Switched to clocksource tsc-early
[    0.771592] VFS: Disk quotas dquot_6.6.0
[    0.771601] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.771636] pnp: PnP ACPI init
[    0.771874] system 00:00: [io  0x0a00-0x0a0f] has been reserved
[    0.771875] system 00:00: [io  0x0a10-0x0a1f] has been reserved
[    0.771876] system 00:00: [io  0x0a20-0x0a2f] has been reserved
[    0.771877] system 00:00: [io  0x0a30-0x0a3f] has been reserved
[    0.771880] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.772165] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.772166] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.772169] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.772183] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.772257] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.772260] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.772411] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.772412] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.772413] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.772414] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.772415] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.772416] system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.772417] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.772418] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.772421] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.772602] system 00:05: [io  0x1800-0x18fe] could not be reserved
[    0.772603] system 00:05: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.772604] system 00:05: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[    0.772605] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.772607] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.772608] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.772609] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.772611] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.772856] system 00:06: [io  0x2000-0x20fe] has been reserved
[    0.772859] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.773079] system 00:07: [mem 0xfd6e0000-0xfd6effff] has been reserved
[    0.773080] system 00:07: [mem 0xfd6d0000-0xfd6dffff] has been reserved
[    0.773081] system 00:07: [mem 0xfd6b0000-0xfd6bffff] has been reserved
[    0.773082] system 00:07: [mem 0xfd6a0000-0xfd6affff] has been reserved
[    0.773085] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.773916] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.774532] pnp: PnP ACPI: found 9 devices
[    0.779809] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.779834] pci 0000:00:1b.4: bridge window [io  0x1000-0x0fff] to [bus 02-6c] add_size 1000
[    0.779846] pci 0000:00:1b.4: BAR 13: assigned [io  0x4000-0x4fff]
[    0.779847] pci 0000:00:1b.0: PCI bridge to [bus 01]
[    0.779862] pci 0000:00:1b.4: PCI bridge to [bus 02-6c]
[    0.779864] pci 0000:00:1b.4:   bridge window [io  0x4000-0x4fff]
[    0.779869] pci 0000:00:1b.4:   bridge window [mem 0x9c000000-0xca0fffff]
[    0.779872] pci 0000:00:1b.4:   bridge window [mem 0x50000000-0x99ffffff 64bit pref]
[    0.779879] pci 0000:00:1d.0: PCI bridge to [bus 6d]
[    0.779883] pci 0000:00:1d.0:   bridge window [mem 0xcc000000-0xcc0fffff]
[    0.779892] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.779893] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.779894] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.779895] pci_bus 0000:00: resource 7 [mem 0x40000000-0xdfffffff window]
[    0.779896] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
[    0.779897] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.779898] pci_bus 0000:02: resource 1 [mem 0x9c000000-0xca0fffff]
[    0.779899] pci_bus 0000:02: resource 2 [mem 0x50000000-0x99ffffff 64bit pref]
[    0.779899] pci_bus 0000:6d: resource 1 [mem 0xcc000000-0xcc0fffff]
[    0.780028] NET: Registered protocol family 2
[    0.780108] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.780142] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.780245] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.780312] TCP: Hash tables configured (established 131072 bind 65536)
[    0.780334] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.780359] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.780406] NET: Registered protocol family 1
[    0.780409] NET: Registered protocol family 44
[    0.780414] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.780708] PCI: CLS 64 bytes, default 64
[    0.780727] Unpacking initramfs...
[    0.853926] Freeing initrd memory: 9180K
[    0.854415] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.854416] software IO TLB: mapped [mem 0x1de5a000-0x21e5a000] (64MB)
[    0.854435] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e452fbb2f, max_idle_ns: 440795236593 ns
[    0.854454] clocksource: Switched to clocksource tsc
[    0.854535] Scanning for low memory corruption every 60 seconds
[    0.854901] Initialise system trusted keyrings
[    0.854907] Key type blacklist registered
[    0.854925] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.855668] zbud: loaded
[    0.855857] pstore: using zstd compression
[    0.856595] Key type asymmetric registered
[    0.856596] Asymmetric key parser 'x509' registered
[    0.856601] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.856622] io scheduler noop registered
[    0.856622] io scheduler deadline registered
[    0.856640] io scheduler cfq registered
[    0.856641] io scheduler mq-deadline registered (default)
[    0.856641] io scheduler kyber registered
[    0.856654] io scheduler bfq registered
[    0.857172] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.857219] efifb: probing for efifb
[    0.857227] efifb: No BGRT, not showing boot graphics
[    0.857228] efifb: framebuffer at 0x40000000, using 3072k, total 3072k
[    0.857228] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.857229] efifb: scrolling: redraw
[    0.857230] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.857253] fbcon: Deferring console take-over
[    0.857254] fb0: EFI VGA frame buffer device
[    0.857259] intel_idle: MWAIT substates: 0x11142120
[    0.857259] intel_idle: v0.4.1 model 0x9E
[    0.857498] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.857558] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.857563] ACPI: Sleep Button [SLPB]
[    0.857584] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.857587] ACPI: Power Button [PWRB]
[    0.857607] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.857615] ACPI: Power Button [PWRF]
[    0.955275] thermal LNXTHERM:00: registered as thermal_zone0
[    0.955276] ACPI: Thermal Zone [TZ00] (28 C)
[    0.955460] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.977351] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.978580] nvme nvme0: pci function 0000:6d:00.0
[    0.978599] usbcore: registered new interface driver usbserial_generic
[    0.978601] usbserial: USB Serial support registered for generic
[    0.978621] rtc_cmos 00:02: RTC can wake from S4
[    0.979593] rtc_cmos 00:02: registered as rtc0
[    0.979600] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.979632] intel_pstate: Intel P-state driver initializing
[    0.980058] intel_pstate: HWP enabled
[    0.980217] ledtrig-cpu: registered to indicate activity on CPUs
[    0.980236] intel_pmc_core:  initialized
[    0.980338] NET: Registered protocol family 10
[    0.982801] Segment Routing with IPv6
[    0.982811] NET: Registered protocol family 17
[    0.983388] RAS: Correctable Errors collector initialized.
[    0.983422] microcode: sig=0x906ec, pf=0x2, revision=0x98
[    0.983554] microcode: Microcode Update Driver: v2.2.
[    0.983559] sched_clock: Marking stable (986481844, -2928923)->(1007148360, -23595439)
[    0.983969] registered taskstats version 1
[    0.983973] Loading compiled-in X.509 certificates
[    0.984908] Loaded X.509 cert 'Build time autogenerated kernel key: 55c82f4680b48bfbc2e839537e06e759768558ec'
[    0.984919] zswap: loaded using pool lzo/zbud
[    0.986680] Key type big_key registered
[    0.987439]   Magic number: 14:44:850
[    0.987441]  index2: hash matches
[    0.987441]  index2: hash matches
[    0.987442]  index2: hash matches
[    0.987442]  index2: hash matches
[    0.987443]  index2: hash matches
[    0.987443]  index2: hash matches
[    0.987443]  index2: hash matches
[    0.987444]  index2: hash matches
[    0.987652] rtc_cmos 00:02: setting system clock to 2018-12-16 19:50:20 UTC (1544989820)
[    1.192587] nvme nvme0: missing or invalid SUBNQN field.
[    1.192641] nvme nvme0: Shutdown timeout set to 8 seconds
[    1.217157]  nvme0n1: p1 p2 p3
[    1.222224] Freeing unused decrypted memory: 2040K
[    1.224212] Freeing unused kernel image memory: 1532K
[    1.224216] Write protecting the kernel read-only data: 18432k
[    1.225699] Freeing unused kernel image memory: 2008K
[    1.225961] Freeing unused kernel image memory: 456K
[    1.247449] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.247457] Run /init as init process
[    1.302896] fbcon: Taking over console
[    1.302924] Console: switching to colour frame buffer device 128x48
[    1.337042] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.337045] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.337154] SCSI subsystem initialized
[    1.338114] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    1.338118] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.338253] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.338253] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.338254] usb usb1: Product: xHCI Host Controller
[    1.338255] usb usb1: Manufacturer: Linux 4.19.8-arch1-1-ARCH xhci-hcd
[    1.338256] usb usb1: SerialNumber: 0000:00:14.0
[    1.338461] hub 1-0:1.0: USB hub found
[    1.338506] hub 1-0:1.0: 16 ports detected
[    1.339855] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.339857] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.339859] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.339879] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    1.339880] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.339881] usb usb2: Product: xHCI Host Controller
[    1.339881] usb usb2: Manufacturer: Linux 4.19.8-arch1-1-ARCH xhci-hcd
[    1.339882] usb usb2: SerialNumber: 0000:00:14.0
[    1.339957] hub 2-0:1.0: USB hub found
[    1.339968] hub 2-0:1.0: 10 ports detected
[    1.341240] libata version 3.00 loaded.
[    1.342790] ahci 0000:00:17.0: version 3.0
[    1.342972] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.342973] ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part ems deso sadm sds apst 
[    1.392424] scsi host0: ahci
[    1.392622] scsi host1: ahci
[    1.392755] scsi host2: ahci
[    1.392909] scsi host3: ahci
[    1.393051] scsi host4: ahci
[    1.393184] scsi host5: ahci
[    1.393233] ata1: SATA max UDMA/133 abar m2048@0xcc139000 port 0xcc139100 irq 130
[    1.393235] ata2: SATA max UDMA/133 abar m2048@0xcc139000 port 0xcc139180 irq 130
[    1.393237] ata3: SATA max UDMA/133 abar m2048@0xcc139000 port 0xcc139200 irq 130
[    1.393239] ata4: SATA max UDMA/133 abar m2048@0xcc139000 port 0xcc139280 irq 130
[    1.393241] ata5: SATA max UDMA/133 abar m2048@0xcc139000 port 0xcc139300 irq 130
[    1.393243] ata6: SATA max UDMA/133 abar m2048@0xcc139000 port 0xcc139380 irq 130
[    1.668493] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[    1.705635] ata6: SATA link down (SStatus 0 SControl 300)
[    1.705677] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.705720] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.705758] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.705796] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.705831] ata1: SATA link down (SStatus 0 SControl 300)
[    1.711435] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.711436] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.711437] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.711440] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.711441] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.711442] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.711445] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.711447] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.711448] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.711530] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.711531] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.711532] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.712064] ata2.00: ATA-9: WDC WD10EZEX-22BN5A0, 01.01A01, max UDMA/133
[    1.712065] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.712088] ata5.00: ATA-10: WDC WD10EZEX-08WN4A0, 02.01A02, max UDMA/100
[    1.712088] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.712092] ata4.00: ATA-9: WDC WD10EZEX-22BN5A0, 01.01A01, max UDMA/133
[    1.712093] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.712192] ata3.00: ATA-9: WDC WD10EZEX-75M2NA0, 01.01A01, max UDMA/133
[    1.712193] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.713641] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.713643] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.713644] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.713646] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.713648] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.713649] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.713651] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.713653] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.713654] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.713740] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.713742] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.713743] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.714257] ata2.00: configured for UDMA/133
[    1.714274] ata4.00: configured for UDMA/133
[    1.714290] ata3.00: configured for UDMA/133
[    1.714294] ata5.00: configured for UDMA/100
[    1.714372] scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EZEX-22B 1A01 PQ: 0 ANSI: 5
[    1.714509] scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EZEX-75M 1A01 PQ: 0 ANSI: 5
[    1.714630] scsi 3:0:0:0: Direct-Access     ATA      WDC WD10EZEX-22B 1A01 PQ: 0 ANSI: 5
[    1.714784] scsi 4:0:0:0: Direct-Access     ATA      WDC WD10EZEX-08W 1A02 PQ: 0 ANSI: 5
[    1.717387] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.717388] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.717389] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[    1.717389] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    1.717392] sd 1:0:0:0: [sda] Write Protect is off
[    1.717393] sd 2:0:0:0: [sdb] Write Protect is off
[    1.717393] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.717394] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.717398] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.717399] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.717403] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.717404] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[    1.717406] sd 3:0:0:0: [sdc] Write Protect is off
[    1.717407] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.717411] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.717418] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.717419] sd 4:0:0:0: [sdd] 4096-byte physical blocks
[    1.717422] sd 4:0:0:0: [sdd] Write Protect is off
[    1.717422] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    1.717425] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.739395] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.746513] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.772500]  sdd:
[    1.772782] sd 4:0:0:0: [sdd] Attached SCSI disk
[    1.784198]  sdc:
[    1.784650] sd 3:0:0:0: [sdc] Attached SCSI disk
[    1.809818] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=32.98
[    1.809819] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.809820] usb 1-4: Product: USB2.0 Hub
[    1.810678] hub 1-4:1.0: USB hub found
[    1.810989] hub 1-4:1.0: 4 ports detected
[    1.935147] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    1.935974] random: fast init done
[    2.076068] usb 1-7: New USB device found, idVendor=1462, idProduct=7b17, bcdDevice= 0.01
[    2.076071] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.076073] usb 1-7: Product: MYSTIC LIGHT 
[    2.076075] usb 1-7: Manufacturer: MSI
[    2.076077] usb 1-7: SerialNumber: A02018072713
[    2.082372] hidraw: raw HID events driver (C) Jiri Kosina
[    2.091604] usbcore: registered new interface driver usbhid
[    2.091605] usbhid: USB HID core driver
[    2.093001] input: MSI MYSTIC LIGHT  as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:1462:7B17.0001/input/input3
[    2.093083] hid-generic 0003:1462:7B17.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [MSI MYSTIC LIGHT ] on usb-0000:00:14.0-7/input0
[    2.098240] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
[    2.144658] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.148431] usb 1-4.2: new full-speed USB device number 4 using xhci_hcd
[    2.158477] systemd[1]: Detected architecture x86-64.
[    2.160684] systemd[1]: Set hostname to <Archie>.
[    2.210804] random: systemd: uninitialized urandom read (16 bytes read)
[    2.210858] systemd[1]: Listening on udev Kernel Socket.
[    2.210986] random: systemd: uninitialized urandom read (16 bytes read)
[    2.210994] systemd[1]: Reached target Remote File Systems.
[    2.211087] random: systemd: uninitialized urandom read (16 bytes read)
[    2.211133] systemd[1]: Listening on Journal Audit Socket.
[    2.212479] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.212531] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.212581] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.212631] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.220758] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    2.220775] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.220789] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    2.220803] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    2.221359] EXT4-fs (nvme0n1p3): re-mounted. Opts: (null)
[    2.221803] audit: type=1130 audit(1544989821.733:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.223846] audit: type=1130 audit(1544989821.733:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.225664] audit: type=1130 audit(1544989821.736:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.230240] audit: type=1130 audit(1544989821.739:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.235985] audit: type=1130 audit(1544989821.746:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.237835] audit: type=1130 audit(1544989821.746:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.240466] audit: type=1130 audit(1544989821.749:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.241983] systemd-journald[288]: Received request to flush runtime journal from PID 1
[    2.247257] usb 1-4.2: New USB device found, idVendor=0665, idProduct=6000, bcdDevice= 0.97
[    2.247258] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.247258] usb 1-4.2: Product: Gaming keyboard
[    2.247259] usb 1-4.2: Manufacturer: EST
[    2.247632] audit: type=1130 audit(1544989821.756:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.253065] random: crng init done
[    2.253066] random: 7 urandom warning(s) missed due to ratelimiting
[    2.255028] input: EST Gaming keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.0/0003:0665:6000.0002/input/input4
[    2.256405] audit: type=1130 audit(1544989821.766:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.272093] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[    2.272121] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[    2.308448] hid-generic 0003:0665:6000.0002: input,hidraw1: USB HID v1.11 Keyboard [EST Gaming keyboard] on usb-0000:00:14.0-4.2/input0
[    2.308948] input: EST Gaming keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.1/0003:0665:6000.0003/input/input5
[    2.315478] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    2.315478] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.315479] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.315479] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    2.315480] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    2.315480] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    2.316197] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.317723] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    2.319647] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.321246] iTCO_vendor_support: vendor-support=0
[    2.321455] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    2.321456] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    2.321636] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.324927] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.324993] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    2.325090] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.327036] Adding 8388604k swap on /dev/nvme0n1p2.  Priority:-2 extents:1 across:8388604k SSFS
[    2.327418] cryptd: max_cpu_qlen set to 1000
[    2.332167] AVX2 version of gcm_enc/dec engaged.
[    2.332167] AES CTR mode by8 optimization enabled
[    2.368421] usb 1-11: new full-speed USB device number 5 using xhci_hcd
[    2.368461] hid-generic 0003:0665:6000.0003: input,hidraw2: USB HID v1.11 Device [EST Gaming keyboard] on usb-0000:00:14.0-4.2/input1
[    2.368895] input: EST Gaming keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.2/0003:0665:6000.0004/input/input7
[    2.379507] intel_rapl: Found RAPL domain package
[    2.379508] intel_rapl: Found RAPL domain core
[    2.379509] intel_rapl: Found RAPL domain uncore
[    2.379509] intel_rapl: Found RAPL domain dram
[    2.425248] hid-generic 0003:0665:6000.0004: input,hidraw3: USB HID v1.11 Keyboard [EST Gaming keyboard] on usb-0000:00:14.0-4.2/input2
[    2.436476] 8021q: 802.1Q VLAN Support v1.8
[    2.463804] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.464865] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.464879] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.464880] cfg80211: failed to load regulatory.db
[    2.510853] usb 1-11: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=30.00
[    2.510855] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.510856] usb 1-11: Product: USB Receiver
[    2.510857] usb 1-11: Manufacturer: Logitech
[    2.513576] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:046D:C52F.0005/input/input8
[    2.513667] hid-generic 0003:046D:C52F.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-11/input0
[    2.514692] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:046D:C52F.0006/input/input9
[    2.568615] hid-generic 0003:046D:C52F.0006: input,hiddev1,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-11/input1
[    2.588303] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[    2.675283] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 00:d8:61:0b:de:f8
[    2.675287] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    2.675358] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
[    2.676626] e1000e 0000:00:1f.6 eno2: renamed from eth0
[    2.695110] usb 1-13: new high-speed USB device number 6 using xhci_hcd
[    2.836643] usb 1-13: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32
[    2.836645] usb 1-13: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.836646] usb 1-13: Product: USB2.0 Hub
[    2.837863] hub 1-13:1.0: USB hub found
[    2.838195] hub 1-13:1.0: 4 ports detected
[    2.952156] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
[    2.961801] usb 1-14: new full-speed USB device number 7 using xhci_hcd
[    3.103290] usb 1-14: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
[    3.103296] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.122194] mousedev: PS/2 mouse device common for all mice
[    3.139586] Bluetooth: Core ver 2.22
[    3.139594] NET: Registered protocol family 31
[    3.139595] Bluetooth: HCI device and connection manager initialized
[    3.139596] Bluetooth: HCI socket layer initialized
[    3.139597] Bluetooth: L2CAP socket layer initialized
[    3.139600] Bluetooth: SCO socket layer initialized
[    3.145370] usbcore: registered new interface driver btusb
[    3.145911] Bluetooth: hci0: Firmware revision 0.1 build 113 week 38 2018
[    5.800997] e1000e: eno2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[    5.801126] IPv6: ADDRCONF(NETDEV_CHANGE): eno2: link becomes ready
[    8.155277] kauditd_printk_skb: 19 callbacks suppressed
[    8.155280] audit: type=1131 audit(1544989827.666:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.113271] audit: type=1006 audit(1544989833.623:31): pid=408 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[   14.121130] audit: type=1130 audit(1544989833.630:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.124700] audit: type=1006 audit(1544989833.633:33): pid=594 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   14.146792] audit: type=1130 audit(1544989833.656:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  914.735251] audit: type=1130 audit(1544990734.529:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  914.735252] audit: type=1131 audit(1544990734.529:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2639.277746] fuse init (API version 7.27)
[ 2639.616377] audit: type=1130 audit(1544992459.454:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pamac-system comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2639.659995] audit: type=1130 audit(1544992459.498:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2647.271566] audit: type=1131 audit(1544992467.108:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pamac-system comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2665.004539] audit: type=1130 audit(1544992484.842:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pamac-system comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2670.420795] audit: type=1131 audit(1544992490.258:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pamac-system comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3747.391481] audit: type=1130 audit(1544993567.259:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3754.087078] audit: type=1006 audit(1544993573.952:43): pid=15656 uid=0 old-auid=4294967295 auid=1000 tty=tty2 old-ses=4294967295 ses=3 res=1

Last edited by lenhuppe (2018-12-16 21:25:11)

Offline

#10 2018-12-16 21:05:06

lenhuppe
Member
From: New Hampshire USA
Registered: 2018-12-10
Posts: 322
Website

Re: SOLVED: i915 driver will not load

My systemd-boot config

$ cat /boot/loader/loader.conf

# bootctl loader config

default arch
timeout 0
editor no
console-mode auto

$ cat /boot/loader/entries/arch.conf

# Arch Linux config

title Arch Linux
linux /vmlinuz-linux
initrd /intel-ucode.img
initrd /initramfs-linux.img
options root=/dev/nvme0n1p3

Last edited by lenhuppe (2018-12-16 21:26:44)

Offline

#11 2018-12-16 21:14:42

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,697

Re: SOLVED: i915 driver will not load

Please edit your posts and wrap the  output in code tags.
According to https://cateee.net/lkddb/web-lkddb/DRM_I915.html the chip seems only added in the 4.20 kernel, see eg. https://aur.archlinux.org/packages/linux-mainline/

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#12 2018-12-16 21:27:37

loqs
Member
Registered: 2014-03-06
Posts: 19,106

Re: SOLVED: i915 driver will not load

https://github.com/torvalds/linux/commi … c76f763552 so linux-mainline 4.20-rc7 which should be released in a few hours should progress further.

Offline

#13 2018-12-17 00:24:53

lenhuppe
Member
From: New Hampshire USA
Registered: 2018-12-10
Posts: 322
Website

Re: SOLVED: i915 driver will not load

I built the linux-mainline 4.20rc6-1 kernel

I then edited my /boot/loader/entries/arch.conf file accordingly

The system boots and I can see that i915 is loading:

$ dmesg | grep i915

[    2.511839] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.512601] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    2.804849] [drm] HuC: Loaded firmware i915/kbl_huc_ver02_00_1810.bin (version 2.0)
[    2.815361] [drm] GuC: Loaded firmware i915/kbl_guc_ver9_39.bin (version 9.39)
[    2.825489] i915 0000:00:02.0: GuC firmware version 9.39
[    2.825490] i915 0000:00:02.0: GuC submission enabled
[    2.825490] i915 0000:00:02.0: HuC enabled
[    2.827347] [drm] Initialized i915 1.6.0 20180921 for 0000:00:02.0 on minor 0
[    2.917685] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device

From here I think that its an Xorg config problem.

$ cat /var/log/Xorg.0.log | grep intel

[     2.840] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/nvme0n1p3 rw elevator=deadline
[     2.849] (==) Matched intel as autoconfigured driver 0
[     2.849] (II) LoadModule: "intel"
[     2.849] (WW) Warning, couldn't open module intel
[     2.849] (EE) Failed to load module "intel" (module does not exist, 0)
[     2.840] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/nvme0n1p3 rw elevator=deadline
[     2.849] (==) Matched intel as autoconfigured driver 0
[     2.849] (II) LoadModule: "intel"
[     2.849] (WW) Warning, couldn't open module intel
[     2.849] (EE) Failed to load module "intel" (module does not exist, 0)

From that first line I can see that Xorg needs to be reconfigured for the new kernel.

Those are the bootctl parameters I used before upgrading the kernel.




Thanks !!!

Last edited by lenhuppe (2018-12-17 03:45:46)

Offline

#14 2018-12-17 00:33:41

loqs
Member
Registered: 2014-03-06
Posts: 19,106

Re: SOLVED: i915 driver will not load

Please post the whole of the Xorg.log the grep does not show if modesetting support was available.

Offline

#15 2018-12-18 04:37:47

lenhuppe
Member
From: New Hampshire USA
Registered: 2018-12-10
Posts: 322
Website

Re: SOLVED: i915 driver will not load

$ startx

[   161.867] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[   161.871] 
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[   161.876] Build Operating System: Linux Arch Linux
[   161.878] Current Operating System: Linux Archie 4.20.0-rc7-mainline #1 SMP PREEMPT Sun Dec 16 23:16:04 EST 2018 x86_64
[   161.878] Kernel command line: initrd=\initramfs-linux.img initrd=\intel-ucode.img root=/dev/nvme0n1p3
[   161.881] Build Date: 25 October 2018  04:42:32PM
[   161.882]  
[   161.883] Current version of pixman: 0.36.0
[   161.886] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   161.886] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   161.893] (==) Log file: "/home/lenny/.local/share/xorg/Xorg.0.log", Time: Mon Dec 17 11:09:49 2018
[   161.895] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   161.895] (==) No Layout section.  Using the first Screen section.
[   161.895] (==) No screen section available. Using defaults.
[   161.895] (**) |-->Screen "Default Screen Section" (0)
[   161.895] (**) |   |-->Monitor "<default monitor>"
[   161.895] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   161.895] (==) Automatically adding devices
[   161.895] (==) Automatically enabling devices
[   161.895] (==) Automatically adding GPU devices
[   161.895] (==) Automatically binding GPU devices
[   161.895] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   161.895] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[   161.895] 	Entry deleted from font path.
[   161.895] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   161.895] 	Entry deleted from font path.
[   161.895] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   161.895] 	Entry deleted from font path.
[   161.895] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[   161.895] 	Entry deleted from font path.
[   161.895] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[   161.895] 	Entry deleted from font path.
[   161.895] (==) FontPath set to:
	/usr/share/fonts/misc
[   161.895] (==) ModulePath set to "/usr/lib/xorg/modules"
[   161.895] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   161.895] (II) Module ABI versions:
[   161.895] 	X.Org ANSI C Emulation: 0.4
[   161.895] 	X.Org Video Driver: 24.0
[   161.895] 	X.Org XInput driver : 24.1
[   161.895] 	X.Org Server Extension : 10.0
[   161.896] (++) using VT number 1

[   161.897] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[   161.897] (II) xfree86: Adding drm device (/dev/dri/card0)
[   161.897] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[   161.898] (--) PCI:*(0@0:2:0) 8086:3e98:1462:7b17 rev 0, Mem @ 0xcb000000/16777216, 0x40000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[   161.898] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   161.898] (II) LoadModule: "glx"
[   161.899] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   161.902] (II) Module glx: vendor="X.Org Foundation"
[   161.902] 	compiled for 1.20.3, module version = 1.0.0
[   161.902] 	ABI class: X.Org Server Extension, version 10.0
[   161.902] (==) Matched intel as autoconfigured driver 0
[   161.902] (==) Matched modesetting as autoconfigured driver 1
[   161.902] (==) Matched fbdev as autoconfigured driver 2
[   161.902] (==) Matched vesa as autoconfigured driver 3
[   161.902] (==) Assigned the driver to the xf86ConfigLayout
[   161.902] (II) LoadModule: "intel"
[   161.902] (WW) Warning, couldn't open module intel
[   161.902] (EE) Failed to load module "intel" (module does not exist, 0)
[   161.902] (II) LoadModule: "modesetting"
[   161.902] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   161.903] (II) Module modesetting: vendor="X.Org Foundation"
[   161.903] 	compiled for 1.20.3, module version = 1.20.3
[   161.903] 	Module class: X.Org Video Driver
[   161.903] 	ABI class: X.Org Video Driver, version 24.0
[   161.903] (II) LoadModule: "fbdev"
[   161.903] (WW) Warning, couldn't open module fbdev
[   161.903] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   161.903] (II) LoadModule: "vesa"
[   161.903] (WW) Warning, couldn't open module vesa
[   161.903] (EE) Failed to load module "vesa" (module does not exist, 0)
[   161.903] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   161.903] (II) modeset(0): using drv /dev/dri/card0
[   161.903] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   161.903] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   161.903] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[   161.904] (==) modeset(0): RGB weight 888
[   161.904] (==) modeset(0): Default visual is TrueColor
[   161.904] (II) Loading sub module "glamoregl"
[   161.904] (II) LoadModule: "glamoregl"
[   161.904] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   161.907] (II) Module glamoregl: vendor="X.Org Foundation"
[   161.907] 	compiled for 1.20.3, module version = 1.0.1
[   161.907] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   161.929] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) HD Graphics (Coffeelake 3x8 GT2) 
[   161.929] (II) modeset(0): glamor initialized
[   161.938] (II) modeset(0): Output HDMI-1 has no monitor section
[   161.946] (II) modeset(0): Output DP-1 has no monitor section
[   161.956] (II) modeset(0): Output HDMI-2 has no monitor section
[   161.966] (II) modeset(0): EDID for output HDMI-1
[   161.974] (II) modeset(0): EDID for output DP-1
[   161.974] (II) modeset(0): Manufacturer: SAM  Model: c4d  Serial#: 810373962
[   161.974] (II) modeset(0): Year: 2018  Week: 12
[   161.974] (II) modeset(0): EDID Version: 1.4
[   161.974] (II) modeset(0): Digital Display Input
[   161.974] (II) modeset(0): 10 bits per channel
[   161.974] (II) modeset(0): Digital interface is DisplayPort
[   161.974] (II) modeset(0): Max Image Size [cm]: horiz.: 61  vert.: 35
[   161.974] (II) modeset(0): Gamma: 2.20
[   161.974] (II) modeset(0): DPMS capabilities: Off
[   161.974] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[   161.974] (II) modeset(0): First detailed timing is preferred mode
[   161.974] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[   161.974] (II) modeset(0): redX: 0.634 redY: 0.341   greenX: 0.312 greenY: 0.636
[   161.974] (II) modeset(0): blueX: 0.158 blueY: 0.062   whiteX: 0.312 whiteY: 0.329
[   161.974] (II) modeset(0): Supported established timings:
[   161.974] (II) modeset(0): 720x400@70Hz
[   161.974] (II) modeset(0): 640x480@60Hz
[   161.974] (II) modeset(0): 640x480@67Hz
[   161.974] (II) modeset(0): 640x480@72Hz
[   161.974] (II) modeset(0): 640x480@75Hz
[   161.974] (II) modeset(0): 800x600@56Hz
[   161.974] (II) modeset(0): 800x600@60Hz
[   161.974] (II) modeset(0): 800x600@72Hz
[   161.974] (II) modeset(0): 800x600@75Hz
[   161.974] (II) modeset(0): 832x624@75Hz
[   161.974] (II) modeset(0): 1024x768@60Hz
[   161.974] (II) modeset(0): 1024x768@70Hz
[   161.974] (II) modeset(0): 1024x768@75Hz
[   161.974] (II) modeset(0): 1280x1024@75Hz
[   161.974] (II) modeset(0): 1152x864@75Hz
[   161.974] (II) modeset(0): Manufacturer's mask: 0
[   161.974] (II) modeset(0): Supported standard timings:
[   161.974] (II) modeset(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[   161.974] (II) modeset(0): #1: hsize: 1280  vsize 800  refresh: 60  vid: 129
[   161.974] (II) modeset(0): #2: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[   161.974] (II) modeset(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   161.974] (II) modeset(0): #4: hsize: 1600  vsize 900  refresh: 60  vid: 49321
[   161.974] (II) modeset(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[   161.974] (II) modeset(0): #6: hsize: 1440  vsize 900  refresh: 60  vid: 149
[   161.974] (II) modeset(0): Supported detailed timing:
[   161.974] (II) modeset(0): clock: 533.2 MHz   Image Size:  607 x 345 mm
[   161.974] (II) modeset(0): h_active: 3840  h_sync: 3888  h_sync_end 3920 h_blank_end 4000 h_border: 0
[   161.974] (II) modeset(0): v_active: 2160  v_sync: 2163  v_sync_end 2168 v_blanking: 2222 v_border: 0
[   161.974] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 135 kHz, PixClock max 605 MHz
[   161.974] (II) modeset(0): Monitor name: U28E590
[   161.974] (II) modeset(0): Serial No: HTPK309563
[   161.974] (II) modeset(0): Supported detailed timing:
[   161.974] (II) modeset(0): clock: 148.5 MHz   Image Size:  607 x 345 mm
[   161.974] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[   161.974] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[   161.974] (II) modeset(0): Supported detailed timing:
[   161.974] (II) modeset(0): clock: 241.5 MHz   Image Size:  607 x 345 mm
[   161.974] (II) modeset(0): h_active: 2560  h_sync: 2608  h_sync_end 2640 h_blank_end 2720 h_border: 0
[   161.974] (II) modeset(0): v_active: 1440  v_sync: 1443  v_sync_end 1448 v_blanking: 1481 v_border: 0
[   161.974] (II) modeset(0): Supported detailed timing:
[   161.974] (II) modeset(0): clock: 297.0 MHz   Image Size:  607 x 345 mm
[   161.974] (II) modeset(0): h_active: 3840  h_sync: 4016  h_sync_end 4104 h_blank_end 4400 h_border: 0
[   161.974] (II) modeset(0): v_active: 2160  v_sync: 2168  v_sync_end 2178 v_blanking: 2250 v_border: 0
[   161.974] (II) modeset(0): Number of EDID sections to follow: 1
[   161.974] (II) modeset(0): EDID (in hex):
[   161.974] (II) modeset(0): 	00ffffffffffff004c2d4d0c4a534d30
[   161.974] (II) modeset(0): 	0c1c0104b53d23783a5fb1a2574fa228
[   161.974] (II) modeset(0): 	0f5054bfef80714f810081c08180a9c0
[   161.974] (II) modeset(0): 	b300950001014dd000a0f0703e803020
[   161.974] (II) modeset(0): 	35005f592100001a000000fd00384b1e
[   161.974] (II) modeset(0): 	873c000a202020202020000000fc0055
[   161.974] (II) modeset(0): 	3238453539300a2020202020000000ff
[   161.974] (II) modeset(0): 	004854504b3330393536330a2020016c
[   161.974] (II) modeset(0): 	02030ef041102309070783010000023a
[   161.974] (II) modeset(0): 	801871382d40582c45005f592100001e
[   161.974] (II) modeset(0): 	565e00a0a0a02950302035005f592100
[   161.974] (II) modeset(0): 	001a04740030f2705a80b0588a005f59
[   161.974] (II) modeset(0): 	2100001e000000000000000000000000
[   161.974] (II) modeset(0): 	00000000000000000000000000000000
[   161.974] (II) modeset(0): 	00000000000000000000000000000000
[   161.974] (II) modeset(0): 	00000000000000000000000000000052
[   161.974] (II) modeset(0): Printing probed modes for output DP-1
[   161.974] (II) modeset(0): Modeline "3840x2160"x60.0  533.25  3840 3888 3920 4000  2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[   161.974] (II) modeset(0): Modeline "3840x2160"x30.0  297.00  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
[   161.974] (II) modeset(0): Modeline "3840x2160"x30.0  296.70  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.4 kHz e)
[   161.974] (II) modeset(0): Modeline "2560x1440"x60.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz e)
[   161.974] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[   161.974] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[   161.974] (II) modeset(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[   161.974] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[   161.974] (II) modeset(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
[   161.974] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   161.974] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   161.974] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[   161.974] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[   161.974] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   161.974] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   161.974] (II) modeset(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   161.974] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   161.974] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   161.974] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   161.974] (II) modeset(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   161.974] (II) modeset(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   161.974] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   161.974] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   161.974] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   161.974] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   161.974] (II) modeset(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   161.974] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   161.974] (II) modeset(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   161.974] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   161.974] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   161.983] (II) modeset(0): EDID for output HDMI-2
[   161.983] (II) modeset(0): Output HDMI-1 disconnected
[   161.983] (II) modeset(0): Output DP-1 connected
[   161.983] (II) modeset(0): Output HDMI-2 disconnected
[   161.983] (II) modeset(0): Using exact sizes for initial modes
[   161.983] (II) modeset(0): Output DP-1 using initial mode 3840x2160 +0+0
[   161.983] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[   161.983] (==) modeset(0): DPI set to (96, 96)
[   161.983] (II) Loading sub module "fb"
[   161.983] (II) LoadModule: "fb"
[   161.984] (II) Loading /usr/lib/xorg/modules/libfb.so
[   161.984] (II) Module fb: vendor="X.Org Foundation"
[   161.984] 	compiled for 1.20.3, module version = 1.0.0
[   161.984] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   161.992] (==) modeset(0): Backing store enabled
[   161.992] (==) modeset(0): Silken mouse disabled
[   162.055] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[   162.055] (==) modeset(0): DPMS enabled
[   162.056] (EE) modeset(0): [DRI2] No driver mapping found for PCI device 0x8086 / 0x3e98
[   162.056] (EE) modeset(0): Failed to initialize the DRI2 extension.
[   162.056] (II) Initializing extension Generic Event Extension
[   162.056] (II) Initializing extension SHAPE
[   162.056] (II) Initializing extension MIT-SHM
[   162.056] (II) Initializing extension XInputExtension
[   162.056] (II) Initializing extension XTEST
[   162.056] (II) Initializing extension BIG-REQUESTS
[   162.056] (II) Initializing extension SYNC
[   162.056] (II) Initializing extension XKEYBOARD
[   162.056] (II) Initializing extension XC-MISC
[   162.056] (II) Initializing extension SECURITY
[   162.056] (II) Initializing extension XFIXES
[   162.056] (II) Initializing extension RENDER
[   162.056] (II) Initializing extension RANDR
[   162.056] (II) Initializing extension COMPOSITE
[   162.056] (II) Initializing extension DAMAGE
[   162.056] (II) Initializing extension MIT-SCREEN-SAVER
[   162.056] (II) Initializing extension DOUBLE-BUFFER
[   162.056] (II) Initializing extension RECORD
[   162.056] (II) Initializing extension DPMS
[   162.056] (II) Initializing extension Present
[   162.056] (II) Initializing extension DRI3
[   162.056] (II) Initializing extension X-Resource
[   162.056] (II) Initializing extension XVideo
[   162.056] (II) Initializing extension XVideo-MotionCompensation
[   162.056] (II) Initializing extension GLX
[   162.056] (II) AIGLX: Screen 0 is not DRI2 capable
[   162.173] (II) IGLX: Loaded and initialized swrast
[   162.173] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   162.173] (II) Initializing extension XFree86-VidModeExtension
[   162.173] (II) Initializing extension XFree86-DGA
[   162.173] (II) Initializing extension XFree86-DRI
[   162.173] (II) Initializing extension DRI2
[   162.184] (II) modeset(0): Damage tracking initialized
[   162.184] (II) modeset(0): Setting screen physical size to 1016 x 571
[   162.256] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   162.256] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   162.256] (II) LoadModule: "libinput"
[   162.256] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   162.259] (II) Module libinput: vendor="X.Org Foundation"
[   162.259] 	compiled for 1.20.1, module version = 0.28.1
[   162.259] 	Module class: X.Org XInput Driver
[   162.259] 	ABI class: X.Org XInput driver, version 24.1
[   162.259] (II) Using input driver 'libinput' for 'Power Button'
[   162.260] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 14 paused 0
[   162.260] (**) Power Button: always reports core events
[   162.260] (**) Option "Device" "/dev/input/event2"
[   162.260] (**) Option "_source" "server/udev"
[   162.262] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   162.262] (II) event2  - Power Button: device is a keyboard
[   162.263] (II) event2  - Power Button: device removed
[   162.263] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[   162.263] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   162.263] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   162.263] (II) event2  - Power Button: device is a keyboard
[   162.264] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[   162.264] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   162.264] (II) Using input driver 'libinput' for 'Video Bus'
[   162.264] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 17 paused 0
[   162.264] (**) Video Bus: always reports core events
[   162.264] (**) Option "Device" "/dev/input/event4"
[   162.264] (**) Option "_source" "server/udev"
[   162.265] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[   162.265] (II) event4  - Video Bus: device is a keyboard
[   162.265] (II) event4  - Video Bus: device removed
[   162.265] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[   162.265] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   162.266] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[   162.266] (II) event4  - Video Bus: device is a keyboard
[   162.266] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   162.266] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   162.266] (II) Using input driver 'libinput' for 'Power Button'
[   162.267] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 18 paused 0
[   162.267] (**) Power Button: always reports core events
[   162.267] (**) Option "Device" "/dev/input/event1"
[   162.267] (**) Option "_source" "server/udev"
[   162.267] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   162.267] (II) event1  - Power Button: device is a keyboard
[   162.267] (II) event1  - Power Button: device removed
[   162.267] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[   162.268] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   162.268] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   162.268] (II) event1  - Power Button: device is a keyboard
[   162.269] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[   162.269] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   162.269] (II) Using input driver 'libinput' for 'Sleep Button'
[   162.269] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 19 paused 0
[   162.269] (**) Sleep Button: always reports core events
[   162.269] (**) Option "Device" "/dev/input/event0"
[   162.269] (**) Option "_source" "server/udev"
[   162.270] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[   162.270] (II) event0  - Sleep Button: device is a keyboard
[   162.270] (II) event0  - Sleep Button: device removed
[   162.270] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[   162.270] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   162.271] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[   162.271] (II) event0  - Sleep Button: device is a keyboard
[   162.272] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[   162.272] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[   162.272] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[   162.327] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 20 paused 0
[   162.327] (**) Logitech USB Receiver: always reports core events
[   162.327] (**) Option "Device" "/dev/input/event6"
[   162.327] (**) Option "_source" "server/udev"
[   162.330] (II) event6  - Logitech USB Receiver: is tagged by udev as: Mouse
[   162.330] (II) event6  - Logitech USB Receiver: device set to 1000 DPI
[   162.330] (II) event6  - Logitech USB Receiver: device is a pointer
[   162.330] (II) event6  - Logitech USB Receiver: device removed
[   162.330] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.0/0003:046D:C52F.0002/input/input6/event6"
[   162.330] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[   162.331] (**) Option "AccelerationScheme" "none"
[   162.331] (**) Logitech USB Receiver: (accel) selected scheme none/0
[   162.331] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   162.331] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   162.333] (II) event6  - Logitech USB Receiver: is tagged by udev as: Mouse
[   162.333] (II) event6  - Logitech USB Receiver: device set to 1000 DPI
[   162.333] (II) event6  - Logitech USB Receiver: device is a pointer
[   162.334] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[   162.335] (II) No input driver specified, ignoring this device.
[   162.335] (II) This device may have been added with another device file.
[   162.336] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event7)
[   162.336] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[   162.336] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[   162.338] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 21 paused 0
[   162.338] (**) Logitech USB Receiver Consumer Control: always reports core events
[   162.338] (**) Option "Device" "/dev/input/event7"
[   162.338] (**) Option "_source" "server/udev"
[   162.340] (II) event7  - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[   162.340] (II) event7  - Logitech USB Receiver Consumer Control: device is a keyboard
[   162.341] (II) event7  - Logitech USB Receiver Consumer Control: device removed
[   162.341] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice
[   162.341] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C52F.0003/input/input7/event7"
[   162.341] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 11)
[   162.341] (**) Option "AccelerationScheme" "none"
[   162.341] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0
[   162.341] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000
[   162.341] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4
[   162.343] (II) event7  - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[   162.343] (II) event7  - Logitech USB Receiver Consumer Control: device is a keyboard
[   162.345] (II) config/udev: Adding input device EST Gaming keyboard (/dev/input/event8)
[   162.345] (**) EST Gaming keyboard: Applying InputClass "libinput keyboard catchall"
[   162.345] (II) Using input driver 'libinput' for 'EST Gaming keyboard'
[   162.347] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 22 paused 0
[   162.347] (**) EST Gaming keyboard: always reports core events
[   162.347] (**) Option "Device" "/dev/input/event8"
[   162.347] (**) Option "_source" "server/udev"
[   162.349] (II) event8  - EST Gaming keyboard: is tagged by udev as: Keyboard
[   162.349] (II) event8  - EST Gaming keyboard: device is a keyboard
[   162.349] (II) event8  - EST Gaming keyboard: device removed
[   162.350] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.0/0003:0665:6000.0004/input/input10/event8"
[   162.350] (II) XINPUT: Adding extended input device "EST Gaming keyboard" (type: KEYBOARD, id 12)
[   162.353] (II) event8  - EST Gaming keyboard: is tagged by udev as: Keyboard
[   162.353] (II) event8  - EST Gaming keyboard: device is a keyboard
[   162.354] (II) config/udev: Adding input device EST Gaming keyboard (/dev/input/event9)
[   162.354] (**) EST Gaming keyboard: Applying InputClass "libinput keyboard catchall"
[   162.354] (II) Using input driver 'libinput' for 'EST Gaming keyboard'
[   162.356] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 23 paused 0
[   162.356] (**) EST Gaming keyboard: always reports core events
[   162.356] (**) Option "Device" "/dev/input/event9"
[   162.356] (**) Option "_source" "server/udev"
[   162.359] (II) event9  - EST Gaming keyboard: is tagged by udev as: Keyboard
[   162.359] (II) event9  - EST Gaming keyboard: device is a keyboard
[   162.359] (II) event9  - EST Gaming keyboard: device removed
[   162.359] (II) libinput: EST Gaming keyboard: needs a virtual subdevice
[   162.359] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.1/0003:0665:6000.0005/input/input11/event9"
[   162.359] (II) XINPUT: Adding extended input device "EST Gaming keyboard" (type: MOUSE, id 13)
[   162.359] (**) Option "AccelerationScheme" "none"
[   162.359] (**) EST Gaming keyboard: (accel) selected scheme none/0
[   162.359] (**) EST Gaming keyboard: (accel) acceleration factor: 2.000
[   162.359] (**) EST Gaming keyboard: (accel) acceleration threshold: 4
[   162.362] (II) event9  - EST Gaming keyboard: is tagged by udev as: Keyboard
[   162.362] (II) event9  - EST Gaming keyboard: device is a keyboard
[   162.363] (II) config/udev: Adding input device EST Gaming keyboard (/dev/input/event10)
[   162.363] (**) EST Gaming keyboard: Applying InputClass "libinput keyboard catchall"
[   162.363] (II) Using input driver 'libinput' for 'EST Gaming keyboard'
[   162.365] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 24 paused 0
[   162.365] (**) EST Gaming keyboard: always reports core events
[   162.365] (**) Option "Device" "/dev/input/event10"
[   162.365] (**) Option "_source" "server/udev"
[   162.368] (II) event10 - EST Gaming keyboard: is tagged by udev as: Keyboard
[   162.368] (II) event10 - EST Gaming keyboard: device is a keyboard
[   162.368] (II) event10 - EST Gaming keyboard: device removed
[   162.368] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.2/0003:0665:6000.0006/input/input12/event10"
[   162.368] (II) XINPUT: Adding extended input device "EST Gaming keyboard" (type: KEYBOARD, id 14)
[   162.371] (II) event10 - EST Gaming keyboard: is tagged by udev as: Keyboard
[   162.371] (II) event10 - EST Gaming keyboard: device is a keyboard
[   162.372] (II) config/udev: Adding input device MSI MYSTIC LIGHT  (/dev/input/event5)
[   162.372] (II) No input driver specified, ignoring this device.
[   162.372] (II) This device may have been added with another device file.
[   162.372] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[   162.372] (II) No input driver specified, ignoring this device.
[   162.372] (II) This device may have been added with another device file.
[   162.376] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[   162.376] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[   162.376] (II) systemd-logind: returning pre-existing fd for /dev/input/event7 13:71
[   162.377] (**) Logitech USB Receiver Consumer Control: always reports core events
[   162.377] (**) Option "Device" "/dev/input/event7"
[   162.377] (**) Option "_source" "_driver/libinput"
[   162.377] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice
[   162.377] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C52F.0003/input/input7/event7"
[   162.377] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 15)
[   162.377] (**) EST Gaming keyboard: Applying InputClass "libinput keyboard catchall"
[   162.377] (II) Using input driver 'libinput' for 'EST Gaming keyboard'
[   162.377] (II) systemd-logind: returning pre-existing fd for /dev/input/event9 13:73
[   162.377] (**) EST Gaming keyboard: always reports core events
[   162.377] (**) Option "Device" "/dev/input/event9"
[   162.377] (**) Option "_source" "_driver/libinput"
[   162.377] (II) libinput: EST Gaming keyboard: is a virtual subdevice
[   162.377] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.1/0003:0665:6000.0005/input/input11/event9"
[   162.377] (II) XINPUT: Adding extended input device "EST Gaming keyboard" (type: KEYBOARD, id 16)
[   162.446] (**) Option "fd" "14"
[   162.446] (II) event2  - Power Button: device removed
[   162.446] (**) Option "fd" "17"
[   162.446] (II) event4  - Video Bus: device removed
[   162.447] (**) Option "fd" "18"
[   162.447] (II) event1  - Power Button: device removed
[   162.447] (**) Option "fd" "19"
[   162.447] (II) event0  - Sleep Button: device removed
[   162.447] (**) Option "fd" "20"
[   162.447] (II) event6  - Logitech USB Receiver: device removed
[   162.447] (**) Option "fd" "21"
[   162.447] (**) Option "fd" "22"
[   162.447] (II) event8  - EST Gaming keyboard: device removed
[   162.447] (**) Option "fd" "23"
[   162.447] (**) Option "fd" "24"
[   162.447] (II) event10 - EST Gaming keyboard: device removed
[   162.447] (**) Option "fd" "21"
[   162.447] (II) event7  - Logitech USB Receiver Consumer Control: device removed
[   162.447] (**) Option "fd" "23"
[   162.447] (II) event9  - EST Gaming keyboard: device removed
[   162.456] (II) UnloadModule: "libinput"
[   162.456] (II) systemd-logind: not releasing fd for 13:73, still in use
[   162.456] (II) UnloadModule: "libinput"
[   162.456] (II) systemd-logind: not releasing fd for 13:71, still in use
[   162.456] (II) UnloadModule: "libinput"
[   162.456] (II) systemd-logind: releasing fd for 13:74
[   162.487] (II) UnloadModule: "libinput"
[   162.487] (II) systemd-logind: releasing fd for 13:73
[   162.527] (II) UnloadModule: "libinput"
[   162.527] (II) systemd-logind: releasing fd for 13:72
[   162.553] (II) UnloadModule: "libinput"
[   162.554] (II) systemd-logind: releasing fd for 13:71
[   162.593] (II) UnloadModule: "libinput"
[   162.594] (II) systemd-logind: releasing fd for 13:70
[   162.647] (II) UnloadModule: "libinput"
[   162.647] (II) systemd-logind: releasing fd for 13:64
[   162.673] (II) UnloadModule: "libinput"
[   162.674] (II) systemd-logind: releasing fd for 13:65
[   162.700] (II) UnloadModule: "libinput"
[   162.700] (II) systemd-logind: releasing fd for 13:68
[   162.754] (II) UnloadModule: "libinput"
[   162.754] (II) systemd-logind: releasing fd for 13:66
[   162.834] (II) Server terminated successfully (0). Closing log file.

I think that I need to install a driver for Xorg

Last edited by lenhuppe (2018-12-18 04:44:41)

Offline

#16 2018-12-18 05:03:17

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,531
Website

Re: SOLVED: i915 driver will not load

lenhuppe wrote:

I think that I need to install a driver for Xorg

No, you don't.

[   162.834] (II) Server terminated successfully (0). Closing log file.

Xorg is running just fine.  You are just not telling it to do anything.  Post your ~/.xinitrc.

Last edited by Trilby (2018-12-18 05:03:52)

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#17 2018-12-18 17:31:55

lenhuppe
Member
From: New Hampshire USA
Registered: 2018-12-10
Posts: 322
Website

Re: SOLVED: i915 driver will not load

I don't have a ~/.xinitrc file. Please allow me to back up and explain what I am doing here.

Prior to this i7 system I had an AMD FX cpu with a Radeon video card. Setting up Gnome was very simple:

$ sudo pacman -Sy xorg-server xorg-xinit gnome gnome-tweaks
$ sudo systemctl enable gdm

I have now switched from BIOS/Grub to UEFI/systemd-boot.

I have also compiled the mainline kernel per the advice given here.

Having said all of that, I now have a fresh system with the mainline kernel compiled and installed. I am not sure of the best way to go about setting up systemd-boot to load the mainline kernel. I am also not fully versed on how that will impact the X and Gnome installation scripts when I run pacman.

Thanks!

Offline

#18 2018-12-18 17:34:44

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,531
Website

Re: SOLVED: i915 driver will not load

lenhuppe wrote:

I don't have a ~/.xinitrc file.

Then that perfectly explains your symptoms.  Create one.

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#19 2018-12-18 17:36:04

loqs
Member
Registered: 2014-03-06
Posts: 19,106

Re: SOLVED: i915 driver will not load

These links cover using startx to start gnome Xinit#xinitrc GNOME#Xorg_sessions
Edit:
If you want to use GDM I would suggest starting without having enabled the service and seeing if it starts a Wayland display server.

Last edited by loqs (2018-12-18 17:37:28)

Offline

#20 2018-12-18 17:41:14

WorMzy
Administrator
From: Scotland
Registered: 2010-06-16
Posts: 13,703
Website

Re: SOLVED: i915 driver will not load

lenhuppe wrote:

$ sudo pacman -Sy [...]

Don't do this.

https://wiki.archlinux.org/index.php/Sy … nsupported

Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD

Making lemonade from lemons since 2015.

Online

#21 2018-12-19 03:59:30

lenhuppe
Member
From: New Hampshire USA
Registered: 2018-12-10
Posts: 322
Website

Re: SOLVED: i915 driver will not load

$ sudo pacman -Sy [...]

Don't do this.

https://wiki.archlinux.org/index.php/Sy … nsupported

Thank you for pointing out that mistake. I knew better but didn't do better.

Offline

#22 2018-12-19 13:29:39

lenhuppe
Member
From: New Hampshire USA
Registered: 2018-12-10
Posts: 322
Website

Re: SOLVED: i915 driver will not load

Voila! The mainline lernel was the answer.

This is no doubt the nicest Linux box I have ever seen or used.

I am indebted to all who have helped me get to this point.

I will pass along the favor ...

Last edited by lenhuppe (2018-12-20 12:43:41)

Offline

Pages: 1

Board footer

Powered by FluxBB