You are not logged in.
Pages: 1
SOLUTION:
I needed the 4.20 kernel
- OP
***
I have an Intel i7 9700k cpu with an integrated UHD 630 gpu running on an MSI mobo with a Z390 chipset. It is a sweet setup and lightning fast. However I am unable to get the i915 driver to load. When I run dmesg and journalctl there is no mention of i915 at all. Its as if it doesn't even exist. When I run glxinfo I get "unable to open display"
I found a post here where someone is running an Intel i9 9900k on an Asrock with a Z390 chipset. This chip is the same series as mine and the poster got the video working by using linux-drm-tip-git from AUR. This is the post: https://bbs.archlinux.org/viewtopic.php?id=242465
I am trying the linux-drm-tip-git package but I think it requires an advanced user.
Can anyone help me troubleshoot this?
Last edited by lenhuppe (2019-05-08 01:45:52)
Why do we drive on the parkway and then park in the driveway?
Offline
lspci
dmesg
glxinfo requires a running X11 server (and display)
Edit: you can paste from console following https://wiki.archlinux.org/index.php/Pastebin
Last edited by seth (2018-12-16 17:19:51)
Offline
glxinfo requires a running X11 server (and display)
Xorg and Gnome are both installed.
I now know that Xorg is failing to start.
Perhaps I need to install a driver?
Why do we drive on the parkway and then park in the driveway?
Offline
@lenhuppe the outputs requested plus Xorg.log will help others understand what is currently occurring on the system.
Offline
I am trying to get my xorg log file onto my MacBook so that I can post it here.
I have dropbox installed and now I have to figure out how to set it up from a command line.
Thank you so very much for being patient.
Why do we drive on the parkway and then park in the driveway?
Offline
If the system has an internet connection please see the tip box from List_of_applications#Pastebin_clients.
Offline
You don't need your macbook or whatever, see the link I posted in comment #2
Also include the output of the commands requested in that post.
Offline
$ lspci
00:00.0 Host bridge: Intel Corporation Device 3e30 (rev 0a)
00:02.0 VGA compatible controller: Intel Corporation Device 3e98
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model
00:12.0 Signal processing controller: Intel Corporation Cannon Lake PCH Thermal Controller (rev 10)
00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10)
00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10)
00:14.3 Network controller: Intel Corporation Wireless-AC 9560 [Jefferson Peak] (rev 10)
00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10)
00:17.0 SATA controller: Intel Corporation Cannon Lake PCH SATA AHCI Controller (rev 10)
00:1b.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #17 (rev f0)
00:1b.4 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #21 (rev f0)
00:1d.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #9 (rev f0)
00:1f.0 ISA bridge: Intel Corporation Device a305 (rev 10)
00:1f.4 SMBus: Intel Corporation Cannon Lake PCH SMBus Controller (rev 10)
00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH SPI Controller (rev 10)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (7) I219-V (rev 10)
6d:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981
Last edited by lenhuppe (2018-12-16 21:24:15)
Why do we drive on the parkway and then park in the driveway?
Offline
$ dmesg
[ 0.000000] Linux version 4.19.8-arch1-1-ARCH (builduser@heftig-1129) (gcc version 8.2.1 20181127 (GCC)) #1 SMP PREEMPT Sat Dec 8 13:49:11 UTC 2018
[ 0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/nvme0n1p3 rw elevator=mq-deadline
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000005efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000005f000-0x000000000005ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000060000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000248f4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000248f5000-0x00000000248f5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000248f6000-0x00000000248f6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000248f7000-0x000000003990efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003990f000-0x0000000039d8efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000039d8f000-0x0000000039f5dfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000039f5e000-0x000000003a31efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003a31f000-0x000000003aefefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003aeff000-0x000000003aefffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003af00000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004beffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x21e6c018-0x21e7c057] usable ==> usable
[ 0.000000] e820: update [mem 0x21e6c018-0x21e7c057] usable ==> usable
[ 0.000000] e820: update [mem 0x21e5a018-0x21e6b857] usable ==> usable
[ 0.000000] e820: update [mem 0x21e5a018-0x21e6b857] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000005efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000005f000-0x000000000005ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000060000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000021e5a017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000021e5a018-0x0000000021e6b857] usable
[ 0.000000] reserve setup_data: [mem 0x0000000021e6b858-0x0000000021e6c017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000021e6c018-0x0000000021e7c057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000021e7c058-0x00000000248f4fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000248f5000-0x00000000248f5fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000248f6000-0x00000000248f6fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000248f7000-0x000000003990efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000003990f000-0x0000000039d8efff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000039d8f000-0x0000000039f5dfff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000039f5e000-0x000000003a31efff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000003a31f000-0x000000003aefefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000003aeff000-0x000000003aefffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000003af00000-0x000000003fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004beffffff] usable
[ 0.000000] efi: EFI v2.70 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x3a270000 ACPI=0x3a270000 SMBIOS=0x3ac18000 MEMATTR=0x36c45018 MPS=0xfcb30 ESRT=0x3667f598
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Micro-Star International Co., Ltd. MS-7B17/MPG Z390 GAMING PRO CARBON AC (MS-7B17), BIOS 1.00 09/03/2018
[ 0.000000] tsc: Detected 3600.000 MHz processor
[ 0.001352] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001353] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001359] last_pfn = 0x4bf000 max_arch_pfn = 0x400000000
[ 0.001361] MTRR default type: write-back
[ 0.001361] MTRR fixed ranges enabled:
[ 0.001362] 00000-9FFFF write-back
[ 0.001363] A0000-BFFFF uncachable
[ 0.001363] C0000-FFFFF write-protect
[ 0.001364] MTRR variable ranges enabled:
[ 0.001365] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.001365] 1 base 0040000000 mask 7FC0000000 uncachable
[ 0.001366] 2 base 003C000000 mask 7FFC000000 uncachable
[ 0.001366] 3 base 003B800000 mask 7FFF800000 uncachable
[ 0.001367] 4 disabled
[ 0.001367] 5 disabled
[ 0.001367] 6 disabled
[ 0.001368] 7 disabled
[ 0.001368] 8 disabled
[ 0.001368] 9 disabled
[ 0.002298] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002443] last_pfn = 0x3af00 max_arch_pfn = 0x400000000
[ 0.007829] found SMP MP-table at [mem 0x000fcdb0-0x000fcdbf] mapped at [(____ptrval____)]
[ 0.007841] esrt: Reserving ESRT space from 0x000000003667f598 to 0x000000003667f5d0.
[ 0.007851] Scanning 1 areas for low memory corruption
[ 0.007853] Base memory trampoline at [(____ptrval____)] 96000 size 24576
[ 0.007855] Using GB pages for direct mapping
[ 0.007856] BRK [0x4ab201000, 0x4ab201fff] PGTABLE
[ 0.007858] BRK [0x4ab202000, 0x4ab202fff] PGTABLE
[ 0.007858] BRK [0x4ab203000, 0x4ab203fff] PGTABLE
[ 0.007889] BRK [0x4ab204000, 0x4ab204fff] PGTABLE
[ 0.007890] BRK [0x4ab205000, 0x4ab205fff] PGTABLE
[ 0.008026] BRK [0x4ab206000, 0x4ab206fff] PGTABLE
[ 0.008107] BRK [0x4ab207000, 0x4ab207fff] PGTABLE
[ 0.008141] BRK [0x4ab208000, 0x4ab208fff] PGTABLE
[ 0.008142] BRK [0x4ab209000, 0x4ab209fff] PGTABLE
[ 0.008173] BRK [0x4ab20a000, 0x4ab20afff] PGTABLE
[ 0.008228] Secure boot disabled
[ 0.008228] RAMDISK: [mem 0x21e7d000-0x22773fff]
[ 0.008237] ACPI: Early table checksum verification disabled
[ 0.008239] ACPI: RSDP 0x000000003A270000 000024 (v02 ALASKA)
[ 0.008242] ACPI: XSDT 0x000000003A2700A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008246] ACPI: FACP 0x000000003A2B22F8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.008249] ACPI: DSDT 0x000000003A2701F0 042107 (v02 ALASKA A M I 01072009 INTL 20160527)
[ 0.008251] ACPI: FACS 0x000000003A31E080 000040
[ 0.008254] ACPI: APIC 0x000000003A2B2410 0000BC (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.008256] ACPI: FPDT 0x000000003A2B24D0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008257] ACPI: FIDT 0x000000003A2B2518 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008259] ACPI: MCFG 0x000000003A2B25B8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.008261] ACPI: SSDT 0x000000003A2B25F8 000378 (v01 SataRe SataTabl 00001000 INTL 20160527)
[ 0.008263] ACPI: SSDT 0x000000003A2B2970 0017D5 (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
[ 0.008265] ACPI: SSDT 0x000000003A2B4148 0031C8 (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
[ 0.008267] ACPI: HPET 0x000000003A2B7310 000038 (v01 INTEL A M I 00000002 01000013)
[ 0.008269] ACPI: SSDT 0x000000003A2B7348 000F9E (v02 INTEL Ther_Rvp 00001000 INTL 20160527)
[ 0.008271] ACPI: SSDT 0x000000003A2B82E8 002951 (v02 INTEL xh_cfsd4 00000000 INTL 20160527)
[ 0.008273] ACPI: UEFI 0x000000003A2BAC40 000048 (v01 ALASKA A M I 00000002 01000013)
[ 0.008275] ACPI: LPIT 0x000000003A2BAC88 00005C (v01 INTEL A M I 00000002 01000013)
[ 0.008277] ACPI: SSDT 0x000000003A2BACE8 0027DE (v02 INTEL PtidDevc 00001000 INTL 20160527)
[ 0.008279] ACPI: SSDT 0x000000003A2BD4C8 000FFE (v02 INTEL TbtTypeC 00000000 INTL 20160527)
[ 0.008281] ACPI: DBGP 0x000000003A2BE4C8 000034 (v01 ALASKA A M I 00000002 01000013)
[ 0.008282] ACPI: DBG2 0x000000003A2BE500 000054 (v00 ALASKA A M I 00000002 01000013)
[ 0.008284] ACPI: SSDT 0x000000003A2BE558 000144 (v02 Intel ADebTabl 00001000 INTL 20160527)
[ 0.008286] ACPI: WSMT 0x000000003A2BE6A0 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008293] ACPI: Local APIC address 0xfee00000
[ 0.008564] No NUMA configuration found
[ 0.008565] Faking a node at [mem 0x0000000000000000-0x00000004beffffff]
[ 0.008567] NODE_DATA(0) allocated [mem 0x4beffc000-0x4beffffff]
[ 0.008583] Zone ranges:
[ 0.008584] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008585] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.008586] Normal [mem 0x0000000100000000-0x00000004beffffff]
[ 0.008587] Device empty
[ 0.008587] Movable zone start for each node
[ 0.008588] Early memory node ranges
[ 0.008588] node 0: [mem 0x0000000000001000-0x000000000005efff]
[ 0.008589] node 0: [mem 0x0000000000060000-0x000000000009ffff]
[ 0.008589] node 0: [mem 0x0000000000100000-0x00000000248f4fff]
[ 0.008590] node 0: [mem 0x00000000248f7000-0x000000003990efff]
[ 0.008590] node 0: [mem 0x0000000039d8f000-0x0000000039f5dfff]
[ 0.008590] node 0: [mem 0x000000003aeff000-0x000000003aefffff]
[ 0.008591] node 0: [mem 0x0000000100000000-0x00000004beffffff]
[ 0.008846] Reserved but unavailable: 25989 pages
[ 0.008847] Initmem setup node 0 [mem 0x0000000000001000-0x00000004beffffff]
[ 0.008848] On node 0 totalpages: 4164219
[ 0.008849] DMA zone: 64 pages used for memmap
[ 0.008849] DMA zone: 26 pages reserved
[ 0.008850] DMA zone: 3998 pages, LIFO batch:0
[ 0.008905] DMA32 zone: 3628 pages used for memmap
[ 0.008906] DMA32 zone: 232157 pages, LIFO batch:63
[ 0.013613] Normal zone: 61376 pages used for memmap
[ 0.013613] Normal zone: 3928064 pages, LIFO batch:63
[ 0.065405] ACPI: PM-Timer IO Port: 0x1808
[ 0.065406] ACPI: Local APIC address 0xfee00000
[ 0.065411] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.065412] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.065412] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.065412] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.065413] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.065413] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.065413] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.065414] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.065466] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.065467] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.065468] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.065469] ACPI: IRQ0 used by override.
[ 0.065470] ACPI: IRQ9 used by override.
[ 0.065471] Using ACPI (MADT) for SMP configuration information
[ 0.065472] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.065475] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.065486] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.065487] PM: Registered nosave memory: [mem 0x0005f000-0x0005ffff]
[ 0.065488] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.065489] PM: Registered nosave memory: [mem 0x21e5a000-0x21e5afff]
[ 0.065490] PM: Registered nosave memory: [mem 0x21e6b000-0x21e6bfff]
[ 0.065490] PM: Registered nosave memory: [mem 0x21e6c000-0x21e6cfff]
[ 0.065491] PM: Registered nosave memory: [mem 0x21e7c000-0x21e7cfff]
[ 0.065492] PM: Registered nosave memory: [mem 0x248f5000-0x248f5fff]
[ 0.065493] PM: Registered nosave memory: [mem 0x248f6000-0x248f6fff]
[ 0.065493] PM: Registered nosave memory: [mem 0x3990f000-0x39d8efff]
[ 0.065494] PM: Registered nosave memory: [mem 0x39f5e000-0x3a31efff]
[ 0.065495] PM: Registered nosave memory: [mem 0x3a31f000-0x3aefefff]
[ 0.065496] PM: Registered nosave memory: [mem 0x3af00000-0x3fffffff]
[ 0.065496] PM: Registered nosave memory: [mem 0x40000000-0xdfffffff]
[ 0.065496] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.065497] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.065497] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.065498] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.065498] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.065498] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.065499] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.065499] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.065499] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.065501] [mem 0x40000000-0xdfffffff] available for PCI devices
[ 0.065502] Booting paravirtualized kernel on bare hardware
[ 0.065504] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.138652] random: get_random_bytes called from start_kernel+0x95/0x545 with crng_init=0
[ 0.138656] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.138775] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144
[ 0.138779] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.138780] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.138793] Built 1 zonelists, mobility grouping on. Total pages: 4099125
[ 0.138793] Policy zone: Normal
[ 0.138794] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/nvme0n1p3 rw elevator=mq-deadline
[ 0.141366] Calgary: detecting Calgary via BIOS EBDA area
[ 0.141367] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.166860] Memory: 15977516K/16656876K available (12300K kernel code, 1374K rwdata, 3640K rodata, 1532K init, 3860K bss, 679360K reserved, 0K cma-reserved)
[ 0.166927] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.166931] ftrace: allocating 35548 entries in 139 pages
[ 0.176708] rcu: Preemptible hierarchical RCU implementation.
[ 0.176709] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.176709] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.176710] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.176710] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.176711] Tasks RCU enabled.
[ 0.176711] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.177643] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[ 0.177876] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.178015] Console: colour dummy device 80x25
[ 0.178018] console [tty0] enabled
[ 0.178028] ACPI: Core revision 20180810
[ 0.178346] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.178385] hpet clockevent registered
[ 0.178436] APIC: Switch to symmetric I/O mode setup
[ 0.180477] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.187287] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.201735] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e452fbb2f, max_idle_ns: 440795236593 ns
[ 0.201743] Calibrating delay loop (skipped), value calculated using timer frequency.. 7202.00 BogoMIPS (lpj=12000000)
[ 0.201744] pid_max: default: 32768 minimum: 301
[ 0.202422] Security Framework initialized
[ 0.202423] Yama: becoming mindful.
[ 0.202426] AppArmor: AppArmor disabled by boot time parameter
[ 0.203751] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.204421] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.204448] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.204469] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.204607] mce: CPU supports 14 MCE banks
[ 0.204614] CPU0: Thermal monitoring enabled (TM1)
[ 0.204634] process: using mwait in idle threads
[ 0.204636] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.204636] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.204637] Spectre V2 : Mitigation: Full generic retpoline
[ 0.204638] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.204638] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.204642] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.204642] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.204810] Freeing SMP alternatives memory: 28K
[ 0.215762] TSC deadline timer enabled
[ 0.215767] smpboot: CPU0: Intel(R) Core(TM) i7-9700K CPU @ 3.60GHz (family: 0x6, model: 0x9e, stepping: 0xc)
[ 0.235074] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.235097] ... version: 4
[ 0.235097] ... bit width: 48
[ 0.235098] ... generic registers: 8
[ 0.235098] ... value mask: 0000ffffffffffff
[ 0.235099] ... max period: 00007fffffffffff
[ 0.235099] ... fixed-purpose events: 3
[ 0.235099] ... event mask: 00000007000000ff
[ 0.241738] rcu: Hierarchical SRCU implementation.
[ 0.265147] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.271741] smp: Bringing up secondary CPUs ...
[ 0.311745] x86: Booting SMP configuration:
[ 0.311746] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.552428] smp: Brought up 1 node, 8 CPUs
[ 0.552428] smpboot: Max logical packages: 1
[ 0.552428] smpboot: Total of 8 processors activated (57623.00 BogoMIPS)
[ 0.555322] devtmpfs: initialized
[ 0.555322] x86/mm: Memory block size: 128MB
[ 0.555823] PM: Registering ACPI NVS region [mem 0x248f5000-0x248f5fff] (4096 bytes)
[ 0.555823] PM: Registering ACPI NVS region [mem 0x39f5e000-0x3a31efff] (3936256 bytes)
[ 0.555823] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.555823] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.555823] pinctrl core: initialized pinctrl subsystem
[ 0.555823] RTC time: 19:50:20, date: 12/16/18
[ 0.555823] NET: Registered protocol family 16
[ 0.555823] audit: initializing netlink subsys (disabled)
[ 0.555823] audit: type=2000 audit(1544989819.379:1): state=initialized audit_enabled=0 res=1
[ 0.558407] cpuidle: using governor ladder
[ 0.558410] cpuidle: using governor menu
[ 0.558423] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.558424] ACPI: bus type PCI registered
[ 0.558425] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.558495] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.558497] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.558505] PCI: Using configuration type 1 for base access
[ 0.559158] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.559158] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.559158] ACPI: Added _OSI(Module Device)
[ 0.559158] ACPI: Added _OSI(Processor Device)
[ 0.559158] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.559158] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.559158] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.559158] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.615185] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.631889] ACPI: Dynamic OEM Table Load:
[ 0.631894] ACPI: SSDT 0xFFFF9C88AC553800 00078C (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 0.632402] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.633781] ACPI: Dynamic OEM Table Load:
[ 0.633785] ACPI: SSDT 0xFFFF9C88AC0E9000 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 0.634181] ACPI: Dynamic OEM Table Load:
[ 0.634184] ACPI: SSDT 0xFFFF9C88AC2E5800 00011B (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
[ 0.634524] ACPI: Dynamic OEM Table Load:
[ 0.634527] ACPI: SSDT 0xFFFF9C88AC552000 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
[ 0.635204] ACPI: Dynamic OEM Table Load:
[ 0.635209] ACPI: SSDT 0xFFFF9C88AC0E0000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527)
[ 0.636245] ACPI: Dynamic OEM Table Load:
[ 0.636248] ACPI: SSDT 0xFFFF9C88AC0EA400 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
[ 0.636659] ACPI: Dynamic OEM Table Load:
[ 0.636662] ACPI: SSDT 0xFFFF9C88AC0EE000 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
[ 0.640594] ACPI: Interpreter enabled
[ 0.640628] ACPI: (supports S0 S3 S4 S5)
[ 0.640628] ACPI: Using IOAPIC for interrupt routing
[ 0.640659] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.641719] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.653356] ACPI: Power Resource [USBC] (on)
[ 0.656202] ACPI: Power Resource [V0PR] (on)
[ 0.656573] ACPI: Power Resource [V1PR] (on)
[ 0.656939] ACPI: Power Resource [V2PR] (on)
[ 0.665688] ACPI: Power Resource [WRST] (on)
[ 0.669958] ACPI: Power Resource [FN00] (off)
[ 0.670036] ACPI: Power Resource [FN01] (off)
[ 0.670111] ACPI: Power Resource [FN02] (off)
[ 0.670186] ACPI: Power Resource [FN03] (off)
[ 0.670261] ACPI: Power Resource [FN04] (off)
[ 0.670900] ACPI: Power Resource [PIN] (off)
[ 0.671351] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.671355] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.671533] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER]
[ 0.671702] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
[ 0.671703] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.672667] PCI host bridge to bus 0000:00
[ 0.672669] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.672670] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.672671] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.672672] pci_bus 0000:00: root bus resource [mem 0x40000000-0xdfffffff window]
[ 0.672673] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[ 0.672674] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.672679] pci 0000:00:00.0: [8086:3e30] type 00 class 0x060000
[ 0.673002] pci 0000:00:02.0: [8086:3e98] type 00 class 0x030000
[ 0.673010] pci 0000:00:02.0: reg 0x10: [mem 0xcb000000-0xcbffffff 64bit]
[ 0.673014] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x4fffffff 64bit pref]
[ 0.673017] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.673027] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.673192] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[ 0.673200] pci 0000:00:08.0: reg 0x10: [mem 0xcc13e000-0xcc13efff 64bit]
[ 0.673406] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[ 0.673440] pci 0000:00:12.0: reg 0x10: [mem 0xcc13d000-0xcc13dfff 64bit]
[ 0.673707] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[ 0.673736] pci 0000:00:14.0: reg 0x10: [mem 0xcc120000-0xcc12ffff 64bit]
[ 0.673827] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.674203] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[ 0.674230] pci 0000:00:14.2: reg 0x10: [mem 0xcc136000-0xcc137fff 64bit]
[ 0.674245] pci 0000:00:14.2: reg 0x18: [mem 0xcc13c000-0xcc13cfff 64bit]
[ 0.675013] pci 0000:00:14.3: [8086:a370] type 00 class 0x028000
[ 0.676447] pci 0000:00:14.3: reg 0x10: [mem 0xcc130000-0xcc133fff 64bit]
[ 0.680787] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[ 0.681745] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[ 0.681781] pci 0000:00:16.0: reg 0x10: [mem 0xcc13b000-0xcc13bfff 64bit]
[ 0.681883] pci 0000:00:16.0: PME# supported from D3hot
[ 0.682132] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
[ 0.682158] pci 0000:00:17.0: reg 0x10: [mem 0xcc134000-0xcc135fff]
[ 0.682168] pci 0000:00:17.0: reg 0x14: [mem 0xcc13a000-0xcc13a0ff]
[ 0.682178] pci 0000:00:17.0: reg 0x18: [io 0x3090-0x3097]
[ 0.682189] pci 0000:00:17.0: reg 0x1c: [io 0x3080-0x3083]
[ 0.682199] pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f]
[ 0.682209] pci 0000:00:17.0: reg 0x24: [mem 0xcc139000-0xcc1397ff]
[ 0.682266] pci 0000:00:17.0: PME# supported from D3hot
[ 0.682477] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400
[ 0.682589] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.682796] pci 0000:00:1b.4: [8086:a32c] type 01 class 0x060400
[ 0.682923] pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
[ 0.682945] pci 0000:00:1b.4: PTM enabled (root), 4dns granularity
[ 0.683153] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
[ 0.683269] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.683288] pci 0000:00:1d.0: PTM enabled (root), 4dns granularity
[ 0.683530] pci 0000:00:1f.0: [8086:a305] type 00 class 0x060100
[ 0.683928] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[ 0.683978] pci 0000:00:1f.4: reg 0x10: [mem 0xcc138000-0xcc1380ff 64bit]
[ 0.684033] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.684227] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[ 0.684249] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.684436] pci 0000:00:1f.6: [8086:15bc] type 00 class 0x020000
[ 0.684493] pci 0000:00:1f.6: reg 0x10: [mem 0xcc100000-0xcc11ffff]
[ 0.684728] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.684983] acpiphp: Slot [1] registered
[ 0.684994] pci 0000:00:1b.0: PCI bridge to [bus 01]
[ 0.685126] pci 0000:00:1b.4: PCI bridge to [bus 02-6c]
[ 0.685132] pci 0000:00:1b.4: bridge window [mem 0x9c000000-0xca0fffff]
[ 0.685138] pci 0000:00:1b.4: bridge window [mem 0x50000000-0x99ffffff 64bit pref]
[ 0.685264] pci 0000:6d:00.0: [144d:a808] type 00 class 0x010802
[ 0.685303] pci 0000:6d:00.0: reg 0x10: [mem 0xcc000000-0xcc003fff 64bit]
[ 0.685550] pci 0000:00:1d.0: PCI bridge to [bus 6d]
[ 0.685556] pci 0000:00:1d.0: bridge window [mem 0xcc000000-0xcc0fffff]
[ 0.686815] ACPI: PCI Interrupt Link [LNKA] (IRQs) *0
[ 0.686846] ACPI: PCI Interrupt Link [LNKB] (IRQs) *1
[ 0.686876] ACPI: PCI Interrupt Link [LNKC] (IRQs) *0
[ 0.686906] ACPI: PCI Interrupt Link [LNKD] (IRQs) *0
[ 0.686936] ACPI: PCI Interrupt Link [LNKE] (IRQs) *0
[ 0.686965] ACPI: PCI Interrupt Link [LNKF] (IRQs) *0
[ 0.686995] ACPI: PCI Interrupt Link [LNKG] (IRQs) *0
[ 0.687024] ACPI: PCI Interrupt Link [LNKH] (IRQs) *0
[ 0.687577] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.687577] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.687577] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.687577] vgaarb: loaded
[ 0.687577] ACPI: bus type USB registered
[ 0.687577] usbcore: registered new interface driver usbfs
[ 0.687577] usbcore: registered new interface driver hub
[ 0.687577] usbcore: registered new device driver usb
[ 0.687577] pps_core: LinuxPPS API ver. 1 registered
[ 0.687577] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.687577] PTP clock support registered
[ 0.687577] EDAC MC: Ver: 3.0.0
[ 0.687577] Registered efivars operations
[ 0.705229] PCI: Using ACPI for IRQ routing
[ 0.762301] PCI: pci_cache_line_size set to 64 bytes
[ 0.762490] e820: reserve RAM buffer [mem 0x0005f000-0x0005ffff]
[ 0.762491] e820: reserve RAM buffer [mem 0x21e5a018-0x23ffffff]
[ 0.762491] e820: reserve RAM buffer [mem 0x21e6c018-0x23ffffff]
[ 0.762492] e820: reserve RAM buffer [mem 0x248f5000-0x27ffffff]
[ 0.762493] e820: reserve RAM buffer [mem 0x3990f000-0x3bffffff]
[ 0.762493] e820: reserve RAM buffer [mem 0x39f5e000-0x3bffffff]
[ 0.762494] e820: reserve RAM buffer [mem 0x3af00000-0x3bffffff]
[ 0.762495] e820: reserve RAM buffer [mem 0x4bf000000-0x4bfffffff]
[ 0.762546] NetLabel: Initializing
[ 0.762547] NetLabel: domain hash size = 128
[ 0.762547] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.762555] NetLabel: unlabeled traffic allowed by default
[ 0.762557] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.762557] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.765070] clocksource: Switched to clocksource tsc-early
[ 0.771592] VFS: Disk quotas dquot_6.6.0
[ 0.771601] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.771636] pnp: PnP ACPI init
[ 0.771874] system 00:00: [io 0x0a00-0x0a0f] has been reserved
[ 0.771875] system 00:00: [io 0x0a10-0x0a1f] has been reserved
[ 0.771876] system 00:00: [io 0x0a20-0x0a2f] has been reserved
[ 0.771877] system 00:00: [io 0x0a30-0x0a3f] has been reserved
[ 0.771880] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.772165] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.772166] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.772169] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.772183] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.772257] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.772260] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.772411] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.772412] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.772413] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.772414] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.772415] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.772416] system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.772417] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.772418] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.772421] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.772602] system 00:05: [io 0x1800-0x18fe] could not be reserved
[ 0.772603] system 00:05: [mem 0xfd000000-0xfd69ffff] has been reserved
[ 0.772604] system 00:05: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[ 0.772605] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 0.772607] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.772608] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 0.772609] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.772611] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.772856] system 00:06: [io 0x2000-0x20fe] has been reserved
[ 0.772859] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.773079] system 00:07: [mem 0xfd6e0000-0xfd6effff] has been reserved
[ 0.773080] system 00:07: [mem 0xfd6d0000-0xfd6dffff] has been reserved
[ 0.773081] system 00:07: [mem 0xfd6b0000-0xfd6bffff] has been reserved
[ 0.773082] system 00:07: [mem 0xfd6a0000-0xfd6affff] has been reserved
[ 0.773085] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.773916] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.774532] pnp: PnP ACPI: found 9 devices
[ 0.779809] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.779834] pci 0000:00:1b.4: bridge window [io 0x1000-0x0fff] to [bus 02-6c] add_size 1000
[ 0.779846] pci 0000:00:1b.4: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.779847] pci 0000:00:1b.0: PCI bridge to [bus 01]
[ 0.779862] pci 0000:00:1b.4: PCI bridge to [bus 02-6c]
[ 0.779864] pci 0000:00:1b.4: bridge window [io 0x4000-0x4fff]
[ 0.779869] pci 0000:00:1b.4: bridge window [mem 0x9c000000-0xca0fffff]
[ 0.779872] pci 0000:00:1b.4: bridge window [mem 0x50000000-0x99ffffff 64bit pref]
[ 0.779879] pci 0000:00:1d.0: PCI bridge to [bus 6d]
[ 0.779883] pci 0000:00:1d.0: bridge window [mem 0xcc000000-0xcc0fffff]
[ 0.779892] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.779893] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.779894] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.779895] pci_bus 0000:00: resource 7 [mem 0x40000000-0xdfffffff window]
[ 0.779896] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
[ 0.779897] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.779898] pci_bus 0000:02: resource 1 [mem 0x9c000000-0xca0fffff]
[ 0.779899] pci_bus 0000:02: resource 2 [mem 0x50000000-0x99ffffff 64bit pref]
[ 0.779899] pci_bus 0000:6d: resource 1 [mem 0xcc000000-0xcc0fffff]
[ 0.780028] NET: Registered protocol family 2
[ 0.780108] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.780142] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.780245] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.780312] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.780334] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.780359] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.780406] NET: Registered protocol family 1
[ 0.780409] NET: Registered protocol family 44
[ 0.780414] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.780708] PCI: CLS 64 bytes, default 64
[ 0.780727] Unpacking initramfs...
[ 0.853926] Freeing initrd memory: 9180K
[ 0.854415] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.854416] software IO TLB: mapped [mem 0x1de5a000-0x21e5a000] (64MB)
[ 0.854435] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e452fbb2f, max_idle_ns: 440795236593 ns
[ 0.854454] clocksource: Switched to clocksource tsc
[ 0.854535] Scanning for low memory corruption every 60 seconds
[ 0.854901] Initialise system trusted keyrings
[ 0.854907] Key type blacklist registered
[ 0.854925] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 0.855668] zbud: loaded
[ 0.855857] pstore: using zstd compression
[ 0.856595] Key type asymmetric registered
[ 0.856596] Asymmetric key parser 'x509' registered
[ 0.856601] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.856622] io scheduler noop registered
[ 0.856622] io scheduler deadline registered
[ 0.856640] io scheduler cfq registered
[ 0.856641] io scheduler mq-deadline registered (default)
[ 0.856641] io scheduler kyber registered
[ 0.856654] io scheduler bfq registered
[ 0.857172] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.857219] efifb: probing for efifb
[ 0.857227] efifb: No BGRT, not showing boot graphics
[ 0.857228] efifb: framebuffer at 0x40000000, using 3072k, total 3072k
[ 0.857228] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.857229] efifb: scrolling: redraw
[ 0.857230] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.857253] fbcon: Deferring console take-over
[ 0.857254] fb0: EFI VGA frame buffer device
[ 0.857259] intel_idle: MWAIT substates: 0x11142120
[ 0.857259] intel_idle: v0.4.1 model 0x9E
[ 0.857498] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.857558] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.857563] ACPI: Sleep Button [SLPB]
[ 0.857584] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.857587] ACPI: Power Button [PWRB]
[ 0.857607] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.857615] ACPI: Power Button [PWRF]
[ 0.955275] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.955276] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.955460] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.977351] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.978580] nvme nvme0: pci function 0000:6d:00.0
[ 0.978599] usbcore: registered new interface driver usbserial_generic
[ 0.978601] usbserial: USB Serial support registered for generic
[ 0.978621] rtc_cmos 00:02: RTC can wake from S4
[ 0.979593] rtc_cmos 00:02: registered as rtc0
[ 0.979600] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.979632] intel_pstate: Intel P-state driver initializing
[ 0.980058] intel_pstate: HWP enabled
[ 0.980217] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.980236] intel_pmc_core: initialized
[ 0.980338] NET: Registered protocol family 10
[ 0.982801] Segment Routing with IPv6
[ 0.982811] NET: Registered protocol family 17
[ 0.983388] RAS: Correctable Errors collector initialized.
[ 0.983422] microcode: sig=0x906ec, pf=0x2, revision=0x98
[ 0.983554] microcode: Microcode Update Driver: v2.2.
[ 0.983559] sched_clock: Marking stable (986481844, -2928923)->(1007148360, -23595439)
[ 0.983969] registered taskstats version 1
[ 0.983973] Loading compiled-in X.509 certificates
[ 0.984908] Loaded X.509 cert 'Build time autogenerated kernel key: 55c82f4680b48bfbc2e839537e06e759768558ec'
[ 0.984919] zswap: loaded using pool lzo/zbud
[ 0.986680] Key type big_key registered
[ 0.987439] Magic number: 14:44:850
[ 0.987441] index2: hash matches
[ 0.987441] index2: hash matches
[ 0.987442] index2: hash matches
[ 0.987442] index2: hash matches
[ 0.987443] index2: hash matches
[ 0.987443] index2: hash matches
[ 0.987443] index2: hash matches
[ 0.987444] index2: hash matches
[ 0.987652] rtc_cmos 00:02: setting system clock to 2018-12-16 19:50:20 UTC (1544989820)
[ 1.192587] nvme nvme0: missing or invalid SUBNQN field.
[ 1.192641] nvme nvme0: Shutdown timeout set to 8 seconds
[ 1.217157] nvme0n1: p1 p2 p3
[ 1.222224] Freeing unused decrypted memory: 2040K
[ 1.224212] Freeing unused kernel image memory: 1532K
[ 1.224216] Write protecting the kernel read-only data: 18432k
[ 1.225699] Freeing unused kernel image memory: 2008K
[ 1.225961] Freeing unused kernel image memory: 456K
[ 1.247449] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.247457] Run /init as init process
[ 1.302896] fbcon: Taking over console
[ 1.302924] Console: switching to colour frame buffer device 128x48
[ 1.337042] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.337045] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.337154] SCSI subsystem initialized
[ 1.338114] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[ 1.338118] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.338253] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.338253] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.338254] usb usb1: Product: xHCI Host Controller
[ 1.338255] usb usb1: Manufacturer: Linux 4.19.8-arch1-1-ARCH xhci-hcd
[ 1.338256] usb usb1: SerialNumber: 0000:00:14.0
[ 1.338461] hub 1-0:1.0: USB hub found
[ 1.338506] hub 1-0:1.0: 16 ports detected
[ 1.339855] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.339857] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.339859] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.339879] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 1.339880] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.339881] usb usb2: Product: xHCI Host Controller
[ 1.339881] usb usb2: Manufacturer: Linux 4.19.8-arch1-1-ARCH xhci-hcd
[ 1.339882] usb usb2: SerialNumber: 0000:00:14.0
[ 1.339957] hub 2-0:1.0: USB hub found
[ 1.339968] hub 2-0:1.0: 10 ports detected
[ 1.341240] libata version 3.00 loaded.
[ 1.342790] ahci 0000:00:17.0: version 3.0
[ 1.342972] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.342973] ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part ems deso sadm sds apst
[ 1.392424] scsi host0: ahci
[ 1.392622] scsi host1: ahci
[ 1.392755] scsi host2: ahci
[ 1.392909] scsi host3: ahci
[ 1.393051] scsi host4: ahci
[ 1.393184] scsi host5: ahci
[ 1.393233] ata1: SATA max UDMA/133 abar m2048@0xcc139000 port 0xcc139100 irq 130
[ 1.393235] ata2: SATA max UDMA/133 abar m2048@0xcc139000 port 0xcc139180 irq 130
[ 1.393237] ata3: SATA max UDMA/133 abar m2048@0xcc139000 port 0xcc139200 irq 130
[ 1.393239] ata4: SATA max UDMA/133 abar m2048@0xcc139000 port 0xcc139280 irq 130
[ 1.393241] ata5: SATA max UDMA/133 abar m2048@0xcc139000 port 0xcc139300 irq 130
[ 1.393243] ata6: SATA max UDMA/133 abar m2048@0xcc139000 port 0xcc139380 irq 130
[ 1.668493] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[ 1.705635] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.705677] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.705720] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.705758] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.705796] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.705831] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.711435] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.711436] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.711437] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.711440] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.711441] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.711442] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.711445] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.711447] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.711448] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.711530] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.711531] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.711532] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.712064] ata2.00: ATA-9: WDC WD10EZEX-22BN5A0, 01.01A01, max UDMA/133
[ 1.712065] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.712088] ata5.00: ATA-10: WDC WD10EZEX-08WN4A0, 02.01A02, max UDMA/100
[ 1.712088] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.712092] ata4.00: ATA-9: WDC WD10EZEX-22BN5A0, 01.01A01, max UDMA/133
[ 1.712093] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.712192] ata3.00: ATA-9: WDC WD10EZEX-75M2NA0, 01.01A01, max UDMA/133
[ 1.712193] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.713641] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.713643] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.713644] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.713646] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.713648] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.713649] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.713651] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.713653] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.713654] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.713740] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.713742] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.713743] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.714257] ata2.00: configured for UDMA/133
[ 1.714274] ata4.00: configured for UDMA/133
[ 1.714290] ata3.00: configured for UDMA/133
[ 1.714294] ata5.00: configured for UDMA/100
[ 1.714372] scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-22B 1A01 PQ: 0 ANSI: 5
[ 1.714509] scsi 2:0:0:0: Direct-Access ATA WDC WD10EZEX-75M 1A01 PQ: 0 ANSI: 5
[ 1.714630] scsi 3:0:0:0: Direct-Access ATA WDC WD10EZEX-22B 1A01 PQ: 0 ANSI: 5
[ 1.714784] scsi 4:0:0:0: Direct-Access ATA WDC WD10EZEX-08W 1A02 PQ: 0 ANSI: 5
[ 1.717387] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.717388] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.717389] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 1.717389] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 1.717392] sd 1:0:0:0: [sda] Write Protect is off
[ 1.717393] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.717393] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.717394] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.717398] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.717399] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.717403] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.717404] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[ 1.717406] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.717407] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.717411] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.717418] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.717419] sd 4:0:0:0: [sdd] 4096-byte physical blocks
[ 1.717422] sd 4:0:0:0: [sdd] Write Protect is off
[ 1.717422] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.717425] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.739395] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.746513] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.772500] sdd:
[ 1.772782] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 1.784198] sdc:
[ 1.784650] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.809818] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=32.98
[ 1.809819] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.809820] usb 1-4: Product: USB2.0 Hub
[ 1.810678] hub 1-4:1.0: USB hub found
[ 1.810989] hub 1-4:1.0: 4 ports detected
[ 1.935147] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 1.935974] random: fast init done
[ 2.076068] usb 1-7: New USB device found, idVendor=1462, idProduct=7b17, bcdDevice= 0.01
[ 2.076071] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.076073] usb 1-7: Product: MYSTIC LIGHT
[ 2.076075] usb 1-7: Manufacturer: MSI
[ 2.076077] usb 1-7: SerialNumber: A02018072713
[ 2.082372] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.091604] usbcore: registered new interface driver usbhid
[ 2.091605] usbhid: USB HID core driver
[ 2.093001] input: MSI MYSTIC LIGHT as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:1462:7B17.0001/input/input3
[ 2.093083] hid-generic 0003:1462:7B17.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [MSI MYSTIC LIGHT ] on usb-0000:00:14.0-7/input0
[ 2.098240] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.144658] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 2.148431] usb 1-4.2: new full-speed USB device number 4 using xhci_hcd
[ 2.158477] systemd[1]: Detected architecture x86-64.
[ 2.160684] systemd[1]: Set hostname to <Archie>.
[ 2.210804] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.210858] systemd[1]: Listening on udev Kernel Socket.
[ 2.210986] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.210994] systemd[1]: Reached target Remote File Systems.
[ 2.211087] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.211133] systemd[1]: Listening on Journal Audit Socket.
[ 2.212479] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.212531] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.212581] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 2.212631] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.220758] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 2.220775] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.220789] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.220803] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 2.221359] EXT4-fs (nvme0n1p3): re-mounted. Opts: (null)
[ 2.221803] audit: type=1130 audit(1544989821.733:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.223846] audit: type=1130 audit(1544989821.733:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.225664] audit: type=1130 audit(1544989821.736:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.230240] audit: type=1130 audit(1544989821.739:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.235985] audit: type=1130 audit(1544989821.746:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.237835] audit: type=1130 audit(1544989821.746:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.240466] audit: type=1130 audit(1544989821.749:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.241983] systemd-journald[288]: Received request to flush runtime journal from PID 1
[ 2.247257] usb 1-4.2: New USB device found, idVendor=0665, idProduct=6000, bcdDevice= 0.97
[ 2.247258] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.247258] usb 1-4.2: Product: Gaming keyboard
[ 2.247259] usb 1-4.2: Manufacturer: EST
[ 2.247632] audit: type=1130 audit(1544989821.756:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.253065] random: crng init done
[ 2.253066] random: 7 urandom warning(s) missed due to ratelimiting
[ 2.255028] input: EST Gaming keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.0/0003:0665:6000.0002/input/input4
[ 2.256405] audit: type=1130 audit(1544989821.766:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.272093] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[ 2.272121] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[ 2.308448] hid-generic 0003:0665:6000.0002: input,hidraw1: USB HID v1.11 Keyboard [EST Gaming keyboard] on usb-0000:00:14.0-4.2/input0
[ 2.308948] input: EST Gaming keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.1/0003:0665:6000.0003/input/input5
[ 2.315478] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 2.315478] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.315479] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.315479] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.315480] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 2.315480] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 2.316197] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 2.317723] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 2.319647] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 2.321246] iTCO_vendor_support: vendor-support=0
[ 2.321455] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 2.321456] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.321636] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.324927] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.324993] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 2.325090] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.327036] Adding 8388604k swap on /dev/nvme0n1p2. Priority:-2 extents:1 across:8388604k SSFS
[ 2.327418] cryptd: max_cpu_qlen set to 1000
[ 2.332167] AVX2 version of gcm_enc/dec engaged.
[ 2.332167] AES CTR mode by8 optimization enabled
[ 2.368421] usb 1-11: new full-speed USB device number 5 using xhci_hcd
[ 2.368461] hid-generic 0003:0665:6000.0003: input,hidraw2: USB HID v1.11 Device [EST Gaming keyboard] on usb-0000:00:14.0-4.2/input1
[ 2.368895] input: EST Gaming keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.2/0003:0665:6000.0004/input/input7
[ 2.379507] intel_rapl: Found RAPL domain package
[ 2.379508] intel_rapl: Found RAPL domain core
[ 2.379509] intel_rapl: Found RAPL domain uncore
[ 2.379509] intel_rapl: Found RAPL domain dram
[ 2.425248] hid-generic 0003:0665:6000.0004: input,hidraw3: USB HID v1.11 Keyboard [EST Gaming keyboard] on usb-0000:00:14.0-4.2/input2
[ 2.436476] 8021q: 802.1Q VLAN Support v1.8
[ 2.463804] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.464865] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.464879] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2.464880] cfg80211: failed to load regulatory.db
[ 2.510853] usb 1-11: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=30.00
[ 2.510855] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.510856] usb 1-11: Product: USB Receiver
[ 2.510857] usb 1-11: Manufacturer: Logitech
[ 2.513576] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:046D:C52F.0005/input/input8
[ 2.513667] hid-generic 0003:046D:C52F.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-11/input0
[ 2.514692] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:046D:C52F.0006/input/input9
[ 2.568615] hid-generic 0003:046D:C52F.0006: input,hiddev1,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-11/input1
[ 2.588303] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 2.675283] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 00:d8:61:0b:de:f8
[ 2.675287] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 2.675358] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
[ 2.676626] e1000e 0000:00:1f.6 eno2: renamed from eth0
[ 2.695110] usb 1-13: new high-speed USB device number 6 using xhci_hcd
[ 2.836643] usb 1-13: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32
[ 2.836645] usb 1-13: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.836646] usb 1-13: Product: USB2.0 Hub
[ 2.837863] hub 1-13:1.0: USB hub found
[ 2.838195] hub 1-13:1.0: 4 ports detected
[ 2.952156] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
[ 2.961801] usb 1-14: new full-speed USB device number 7 using xhci_hcd
[ 3.103290] usb 1-14: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
[ 3.103296] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.122194] mousedev: PS/2 mouse device common for all mice
[ 3.139586] Bluetooth: Core ver 2.22
[ 3.139594] NET: Registered protocol family 31
[ 3.139595] Bluetooth: HCI device and connection manager initialized
[ 3.139596] Bluetooth: HCI socket layer initialized
[ 3.139597] Bluetooth: L2CAP socket layer initialized
[ 3.139600] Bluetooth: SCO socket layer initialized
[ 3.145370] usbcore: registered new interface driver btusb
[ 3.145911] Bluetooth: hci0: Firmware revision 0.1 build 113 week 38 2018
[ 5.800997] e1000e: eno2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 5.801126] IPv6: ADDRCONF(NETDEV_CHANGE): eno2: link becomes ready
[ 8.155277] kauditd_printk_skb: 19 callbacks suppressed
[ 8.155280] audit: type=1131 audit(1544989827.666:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 14.113271] audit: type=1006 audit(1544989833.623:31): pid=408 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[ 14.121130] audit: type=1130 audit(1544989833.630:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 14.124700] audit: type=1006 audit(1544989833.633:33): pid=594 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 14.146792] audit: type=1130 audit(1544989833.656:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 914.735251] audit: type=1130 audit(1544990734.529:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 914.735252] audit: type=1131 audit(1544990734.529:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2639.277746] fuse init (API version 7.27)
[ 2639.616377] audit: type=1130 audit(1544992459.454:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pamac-system comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2639.659995] audit: type=1130 audit(1544992459.498:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2647.271566] audit: type=1131 audit(1544992467.108:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pamac-system comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2665.004539] audit: type=1130 audit(1544992484.842:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pamac-system comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2670.420795] audit: type=1131 audit(1544992490.258:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pamac-system comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3747.391481] audit: type=1130 audit(1544993567.259:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3754.087078] audit: type=1006 audit(1544993573.952:43): pid=15656 uid=0 old-auid=4294967295 auid=1000 tty=tty2 old-ses=4294967295 ses=3 res=1
Last edited by lenhuppe (2018-12-16 21:25:11)
Why do we drive on the parkway and then park in the driveway?
Offline
My systemd-boot config
$ cat /boot/loader/loader.conf
# bootctl loader config
default arch
timeout 0
editor no
console-mode auto
$ cat /boot/loader/entries/arch.conf
# Arch Linux config
title Arch Linux
linux /vmlinuz-linux
initrd /intel-ucode.img
initrd /initramfs-linux.img
options root=/dev/nvme0n1p3
Last edited by lenhuppe (2018-12-16 21:26:44)
Why do we drive on the parkway and then park in the driveway?
Offline
Please edit your posts and wrap the output in code tags.
According to https://cateee.net/lkddb/web-lkddb/DRM_I915.html the chip seems only added in the 4.20 kernel, see eg. https://aur.archlinux.org/packages/linux-mainline/
Offline
https://github.com/torvalds/linux/commi … c76f763552 so linux-mainline 4.20-rc7 which should be released in a few hours should progress further.
Offline
I built the linux-mainline 4.20rc6-1 kernel
I then edited my /boot/loader/entries/arch.conf file accordingly
The system boots and I can see that i915 is loading:
$ dmesg | grep i915
[ 2.511839] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.512601] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 2.804849] [drm] HuC: Loaded firmware i915/kbl_huc_ver02_00_1810.bin (version 2.0)
[ 2.815361] [drm] GuC: Loaded firmware i915/kbl_guc_ver9_39.bin (version 9.39)
[ 2.825489] i915 0000:00:02.0: GuC firmware version 9.39
[ 2.825490] i915 0000:00:02.0: GuC submission enabled
[ 2.825490] i915 0000:00:02.0: HuC enabled
[ 2.827347] [drm] Initialized i915 1.6.0 20180921 for 0000:00:02.0 on minor 0
[ 2.917685] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
From here I think that its an Xorg config problem.
$ cat /var/log/Xorg.0.log | grep intel
[ 2.840] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/nvme0n1p3 rw elevator=deadline
[ 2.849] (==) Matched intel as autoconfigured driver 0
[ 2.849] (II) LoadModule: "intel"
[ 2.849] (WW) Warning, couldn't open module intel
[ 2.849] (EE) Failed to load module "intel" (module does not exist, 0)
[ 2.840] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/nvme0n1p3 rw elevator=deadline
[ 2.849] (==) Matched intel as autoconfigured driver 0
[ 2.849] (II) LoadModule: "intel"
[ 2.849] (WW) Warning, couldn't open module intel
[ 2.849] (EE) Failed to load module "intel" (module does not exist, 0)
From that first line I can see that Xorg needs to be reconfigured for the new kernel.
Those are the bootctl parameters I used before upgrading the kernel.
Thanks !!!
Last edited by lenhuppe (2018-12-17 03:45:46)
Why do we drive on the parkway and then park in the driveway?
Offline
Please post the whole of the Xorg.log the grep does not show if modesetting support was available.
Offline
$ startx
[ 161.867] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 161.871]
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[ 161.876] Build Operating System: Linux Arch Linux
[ 161.878] Current Operating System: Linux Archie 4.20.0-rc7-mainline #1 SMP PREEMPT Sun Dec 16 23:16:04 EST 2018 x86_64
[ 161.878] Kernel command line: initrd=\initramfs-linux.img initrd=\intel-ucode.img root=/dev/nvme0n1p3
[ 161.881] Build Date: 25 October 2018 04:42:32PM
[ 161.882]
[ 161.883] Current version of pixman: 0.36.0
[ 161.886] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 161.886] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 161.893] (==) Log file: "/home/lenny/.local/share/xorg/Xorg.0.log", Time: Mon Dec 17 11:09:49 2018
[ 161.895] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 161.895] (==) No Layout section. Using the first Screen section.
[ 161.895] (==) No screen section available. Using defaults.
[ 161.895] (**) |-->Screen "Default Screen Section" (0)
[ 161.895] (**) | |-->Monitor "<default monitor>"
[ 161.895] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 161.895] (==) Automatically adding devices
[ 161.895] (==) Automatically enabling devices
[ 161.895] (==) Automatically adding GPU devices
[ 161.895] (==) Automatically binding GPU devices
[ 161.895] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 161.895] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[ 161.895] Entry deleted from font path.
[ 161.895] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 161.895] Entry deleted from font path.
[ 161.895] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 161.895] Entry deleted from font path.
[ 161.895] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 161.895] Entry deleted from font path.
[ 161.895] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 161.895] Entry deleted from font path.
[ 161.895] (==) FontPath set to:
/usr/share/fonts/misc
[ 161.895] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 161.895] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 161.895] (II) Module ABI versions:
[ 161.895] X.Org ANSI C Emulation: 0.4
[ 161.895] X.Org Video Driver: 24.0
[ 161.895] X.Org XInput driver : 24.1
[ 161.895] X.Org Server Extension : 10.0
[ 161.896] (++) using VT number 1
[ 161.897] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 161.897] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 161.897] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[ 161.898] (--) PCI:*(0@0:2:0) 8086:3e98:1462:7b17 rev 0, Mem @ 0xcb000000/16777216, 0x40000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[ 161.898] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 161.898] (II) LoadModule: "glx"
[ 161.899] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 161.902] (II) Module glx: vendor="X.Org Foundation"
[ 161.902] compiled for 1.20.3, module version = 1.0.0
[ 161.902] ABI class: X.Org Server Extension, version 10.0
[ 161.902] (==) Matched intel as autoconfigured driver 0
[ 161.902] (==) Matched modesetting as autoconfigured driver 1
[ 161.902] (==) Matched fbdev as autoconfigured driver 2
[ 161.902] (==) Matched vesa as autoconfigured driver 3
[ 161.902] (==) Assigned the driver to the xf86ConfigLayout
[ 161.902] (II) LoadModule: "intel"
[ 161.902] (WW) Warning, couldn't open module intel
[ 161.902] (EE) Failed to load module "intel" (module does not exist, 0)
[ 161.902] (II) LoadModule: "modesetting"
[ 161.902] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 161.903] (II) Module modesetting: vendor="X.Org Foundation"
[ 161.903] compiled for 1.20.3, module version = 1.20.3
[ 161.903] Module class: X.Org Video Driver
[ 161.903] ABI class: X.Org Video Driver, version 24.0
[ 161.903] (II) LoadModule: "fbdev"
[ 161.903] (WW) Warning, couldn't open module fbdev
[ 161.903] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 161.903] (II) LoadModule: "vesa"
[ 161.903] (WW) Warning, couldn't open module vesa
[ 161.903] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 161.903] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 161.903] (II) modeset(0): using drv /dev/dri/card0
[ 161.903] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 161.903] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 161.903] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 161.904] (==) modeset(0): RGB weight 888
[ 161.904] (==) modeset(0): Default visual is TrueColor
[ 161.904] (II) Loading sub module "glamoregl"
[ 161.904] (II) LoadModule: "glamoregl"
[ 161.904] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 161.907] (II) Module glamoregl: vendor="X.Org Foundation"
[ 161.907] compiled for 1.20.3, module version = 1.0.1
[ 161.907] ABI class: X.Org ANSI C Emulation, version 0.4
[ 161.929] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) HD Graphics (Coffeelake 3x8 GT2)
[ 161.929] (II) modeset(0): glamor initialized
[ 161.938] (II) modeset(0): Output HDMI-1 has no monitor section
[ 161.946] (II) modeset(0): Output DP-1 has no monitor section
[ 161.956] (II) modeset(0): Output HDMI-2 has no monitor section
[ 161.966] (II) modeset(0): EDID for output HDMI-1
[ 161.974] (II) modeset(0): EDID for output DP-1
[ 161.974] (II) modeset(0): Manufacturer: SAM Model: c4d Serial#: 810373962
[ 161.974] (II) modeset(0): Year: 2018 Week: 12
[ 161.974] (II) modeset(0): EDID Version: 1.4
[ 161.974] (II) modeset(0): Digital Display Input
[ 161.974] (II) modeset(0): 10 bits per channel
[ 161.974] (II) modeset(0): Digital interface is DisplayPort
[ 161.974] (II) modeset(0): Max Image Size [cm]: horiz.: 61 vert.: 35
[ 161.974] (II) modeset(0): Gamma: 2.20
[ 161.974] (II) modeset(0): DPMS capabilities: Off
[ 161.974] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[ 161.974] (II) modeset(0): First detailed timing is preferred mode
[ 161.974] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 161.974] (II) modeset(0): redX: 0.634 redY: 0.341 greenX: 0.312 greenY: 0.636
[ 161.974] (II) modeset(0): blueX: 0.158 blueY: 0.062 whiteX: 0.312 whiteY: 0.329
[ 161.974] (II) modeset(0): Supported established timings:
[ 161.974] (II) modeset(0): 720x400@70Hz
[ 161.974] (II) modeset(0): 640x480@60Hz
[ 161.974] (II) modeset(0): 640x480@67Hz
[ 161.974] (II) modeset(0): 640x480@72Hz
[ 161.974] (II) modeset(0): 640x480@75Hz
[ 161.974] (II) modeset(0): 800x600@56Hz
[ 161.974] (II) modeset(0): 800x600@60Hz
[ 161.974] (II) modeset(0): 800x600@72Hz
[ 161.974] (II) modeset(0): 800x600@75Hz
[ 161.974] (II) modeset(0): 832x624@75Hz
[ 161.974] (II) modeset(0): 1024x768@60Hz
[ 161.974] (II) modeset(0): 1024x768@70Hz
[ 161.974] (II) modeset(0): 1024x768@75Hz
[ 161.974] (II) modeset(0): 1280x1024@75Hz
[ 161.974] (II) modeset(0): 1152x864@75Hz
[ 161.974] (II) modeset(0): Manufacturer's mask: 0
[ 161.974] (II) modeset(0): Supported standard timings:
[ 161.974] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 161.974] (II) modeset(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 161.974] (II) modeset(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 161.974] (II) modeset(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 161.974] (II) modeset(0): #4: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 161.974] (II) modeset(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 161.974] (II) modeset(0): #6: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 161.974] (II) modeset(0): Supported detailed timing:
[ 161.974] (II) modeset(0): clock: 533.2 MHz Image Size: 607 x 345 mm
[ 161.974] (II) modeset(0): h_active: 3840 h_sync: 3888 h_sync_end 3920 h_blank_end 4000 h_border: 0
[ 161.974] (II) modeset(0): v_active: 2160 v_sync: 2163 v_sync_end 2168 v_blanking: 2222 v_border: 0
[ 161.974] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 135 kHz, PixClock max 605 MHz
[ 161.974] (II) modeset(0): Monitor name: U28E590
[ 161.974] (II) modeset(0): Serial No: HTPK309563
[ 161.974] (II) modeset(0): Supported detailed timing:
[ 161.974] (II) modeset(0): clock: 148.5 MHz Image Size: 607 x 345 mm
[ 161.974] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 161.974] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 161.974] (II) modeset(0): Supported detailed timing:
[ 161.974] (II) modeset(0): clock: 241.5 MHz Image Size: 607 x 345 mm
[ 161.974] (II) modeset(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 161.974] (II) modeset(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0
[ 161.974] (II) modeset(0): Supported detailed timing:
[ 161.974] (II) modeset(0): clock: 297.0 MHz Image Size: 607 x 345 mm
[ 161.974] (II) modeset(0): h_active: 3840 h_sync: 4016 h_sync_end 4104 h_blank_end 4400 h_border: 0
[ 161.974] (II) modeset(0): v_active: 2160 v_sync: 2168 v_sync_end 2178 v_blanking: 2250 v_border: 0
[ 161.974] (II) modeset(0): Number of EDID sections to follow: 1
[ 161.974] (II) modeset(0): EDID (in hex):
[ 161.974] (II) modeset(0): 00ffffffffffff004c2d4d0c4a534d30
[ 161.974] (II) modeset(0): 0c1c0104b53d23783a5fb1a2574fa228
[ 161.974] (II) modeset(0): 0f5054bfef80714f810081c08180a9c0
[ 161.974] (II) modeset(0): b300950001014dd000a0f0703e803020
[ 161.974] (II) modeset(0): 35005f592100001a000000fd00384b1e
[ 161.974] (II) modeset(0): 873c000a202020202020000000fc0055
[ 161.974] (II) modeset(0): 3238453539300a2020202020000000ff
[ 161.974] (II) modeset(0): 004854504b3330393536330a2020016c
[ 161.974] (II) modeset(0): 02030ef041102309070783010000023a
[ 161.974] (II) modeset(0): 801871382d40582c45005f592100001e
[ 161.974] (II) modeset(0): 565e00a0a0a02950302035005f592100
[ 161.974] (II) modeset(0): 001a04740030f2705a80b0588a005f59
[ 161.974] (II) modeset(0): 2100001e000000000000000000000000
[ 161.974] (II) modeset(0): 00000000000000000000000000000000
[ 161.974] (II) modeset(0): 00000000000000000000000000000000
[ 161.974] (II) modeset(0): 00000000000000000000000000000052
[ 161.974] (II) modeset(0): Printing probed modes for output DP-1
[ 161.974] (II) modeset(0): Modeline "3840x2160"x60.0 533.25 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[ 161.974] (II) modeset(0): Modeline "3840x2160"x30.0 297.00 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
[ 161.974] (II) modeset(0): Modeline "3840x2160"x30.0 296.70 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync (67.4 kHz e)
[ 161.974] (II) modeset(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz e)
[ 161.974] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 161.974] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 161.974] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 161.974] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 161.974] (II) modeset(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 161.974] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 161.974] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 161.974] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 161.974] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 161.974] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 161.974] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 161.974] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 161.974] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 161.974] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 161.974] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 161.974] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 161.974] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 161.974] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 161.974] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 161.974] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 161.974] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 161.974] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 161.974] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 161.974] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 161.974] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 161.974] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 161.983] (II) modeset(0): EDID for output HDMI-2
[ 161.983] (II) modeset(0): Output HDMI-1 disconnected
[ 161.983] (II) modeset(0): Output DP-1 connected
[ 161.983] (II) modeset(0): Output HDMI-2 disconnected
[ 161.983] (II) modeset(0): Using exact sizes for initial modes
[ 161.983] (II) modeset(0): Output DP-1 using initial mode 3840x2160 +0+0
[ 161.983] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 161.983] (==) modeset(0): DPI set to (96, 96)
[ 161.983] (II) Loading sub module "fb"
[ 161.983] (II) LoadModule: "fb"
[ 161.984] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 161.984] (II) Module fb: vendor="X.Org Foundation"
[ 161.984] compiled for 1.20.3, module version = 1.0.0
[ 161.984] ABI class: X.Org ANSI C Emulation, version 0.4
[ 161.992] (==) modeset(0): Backing store enabled
[ 161.992] (==) modeset(0): Silken mouse disabled
[ 162.055] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 162.055] (==) modeset(0): DPMS enabled
[ 162.056] (EE) modeset(0): [DRI2] No driver mapping found for PCI device 0x8086 / 0x3e98
[ 162.056] (EE) modeset(0): Failed to initialize the DRI2 extension.
[ 162.056] (II) Initializing extension Generic Event Extension
[ 162.056] (II) Initializing extension SHAPE
[ 162.056] (II) Initializing extension MIT-SHM
[ 162.056] (II) Initializing extension XInputExtension
[ 162.056] (II) Initializing extension XTEST
[ 162.056] (II) Initializing extension BIG-REQUESTS
[ 162.056] (II) Initializing extension SYNC
[ 162.056] (II) Initializing extension XKEYBOARD
[ 162.056] (II) Initializing extension XC-MISC
[ 162.056] (II) Initializing extension SECURITY
[ 162.056] (II) Initializing extension XFIXES
[ 162.056] (II) Initializing extension RENDER
[ 162.056] (II) Initializing extension RANDR
[ 162.056] (II) Initializing extension COMPOSITE
[ 162.056] (II) Initializing extension DAMAGE
[ 162.056] (II) Initializing extension MIT-SCREEN-SAVER
[ 162.056] (II) Initializing extension DOUBLE-BUFFER
[ 162.056] (II) Initializing extension RECORD
[ 162.056] (II) Initializing extension DPMS
[ 162.056] (II) Initializing extension Present
[ 162.056] (II) Initializing extension DRI3
[ 162.056] (II) Initializing extension X-Resource
[ 162.056] (II) Initializing extension XVideo
[ 162.056] (II) Initializing extension XVideo-MotionCompensation
[ 162.056] (II) Initializing extension GLX
[ 162.056] (II) AIGLX: Screen 0 is not DRI2 capable
[ 162.173] (II) IGLX: Loaded and initialized swrast
[ 162.173] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 162.173] (II) Initializing extension XFree86-VidModeExtension
[ 162.173] (II) Initializing extension XFree86-DGA
[ 162.173] (II) Initializing extension XFree86-DRI
[ 162.173] (II) Initializing extension DRI2
[ 162.184] (II) modeset(0): Damage tracking initialized
[ 162.184] (II) modeset(0): Setting screen physical size to 1016 x 571
[ 162.256] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 162.256] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 162.256] (II) LoadModule: "libinput"
[ 162.256] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 162.259] (II) Module libinput: vendor="X.Org Foundation"
[ 162.259] compiled for 1.20.1, module version = 0.28.1
[ 162.259] Module class: X.Org XInput Driver
[ 162.259] ABI class: X.Org XInput driver, version 24.1
[ 162.259] (II) Using input driver 'libinput' for 'Power Button'
[ 162.260] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 14 paused 0
[ 162.260] (**) Power Button: always reports core events
[ 162.260] (**) Option "Device" "/dev/input/event2"
[ 162.260] (**) Option "_source" "server/udev"
[ 162.262] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 162.262] (II) event2 - Power Button: device is a keyboard
[ 162.263] (II) event2 - Power Button: device removed
[ 162.263] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 162.263] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 162.263] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 162.263] (II) event2 - Power Button: device is a keyboard
[ 162.264] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 162.264] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 162.264] (II) Using input driver 'libinput' for 'Video Bus'
[ 162.264] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 17 paused 0
[ 162.264] (**) Video Bus: always reports core events
[ 162.264] (**) Option "Device" "/dev/input/event4"
[ 162.264] (**) Option "_source" "server/udev"
[ 162.265] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 162.265] (II) event4 - Video Bus: device is a keyboard
[ 162.265] (II) event4 - Video Bus: device removed
[ 162.265] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 162.265] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 162.266] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 162.266] (II) event4 - Video Bus: device is a keyboard
[ 162.266] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 162.266] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 162.266] (II) Using input driver 'libinput' for 'Power Button'
[ 162.267] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 18 paused 0
[ 162.267] (**) Power Button: always reports core events
[ 162.267] (**) Option "Device" "/dev/input/event1"
[ 162.267] (**) Option "_source" "server/udev"
[ 162.267] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 162.267] (II) event1 - Power Button: device is a keyboard
[ 162.267] (II) event1 - Power Button: device removed
[ 162.267] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 162.268] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 162.268] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 162.268] (II) event1 - Power Button: device is a keyboard
[ 162.269] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 162.269] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 162.269] (II) Using input driver 'libinput' for 'Sleep Button'
[ 162.269] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 19 paused 0
[ 162.269] (**) Sleep Button: always reports core events
[ 162.269] (**) Option "Device" "/dev/input/event0"
[ 162.269] (**) Option "_source" "server/udev"
[ 162.270] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 162.270] (II) event0 - Sleep Button: device is a keyboard
[ 162.270] (II) event0 - Sleep Button: device removed
[ 162.270] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 162.270] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 162.271] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 162.271] (II) event0 - Sleep Button: device is a keyboard
[ 162.272] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[ 162.272] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[ 162.272] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 162.327] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 20 paused 0
[ 162.327] (**) Logitech USB Receiver: always reports core events
[ 162.327] (**) Option "Device" "/dev/input/event6"
[ 162.327] (**) Option "_source" "server/udev"
[ 162.330] (II) event6 - Logitech USB Receiver: is tagged by udev as: Mouse
[ 162.330] (II) event6 - Logitech USB Receiver: device set to 1000 DPI
[ 162.330] (II) event6 - Logitech USB Receiver: device is a pointer
[ 162.330] (II) event6 - Logitech USB Receiver: device removed
[ 162.330] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.0/0003:046D:C52F.0002/input/input6/event6"
[ 162.330] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 162.331] (**) Option "AccelerationScheme" "none"
[ 162.331] (**) Logitech USB Receiver: (accel) selected scheme none/0
[ 162.331] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 162.331] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 162.333] (II) event6 - Logitech USB Receiver: is tagged by udev as: Mouse
[ 162.333] (II) event6 - Logitech USB Receiver: device set to 1000 DPI
[ 162.333] (II) event6 - Logitech USB Receiver: device is a pointer
[ 162.334] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 162.335] (II) No input driver specified, ignoring this device.
[ 162.335] (II) This device may have been added with another device file.
[ 162.336] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event7)
[ 162.336] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 162.336] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 162.338] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 21 paused 0
[ 162.338] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 162.338] (**) Option "Device" "/dev/input/event7"
[ 162.338] (**) Option "_source" "server/udev"
[ 162.340] (II) event7 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 162.340] (II) event7 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 162.341] (II) event7 - Logitech USB Receiver Consumer Control: device removed
[ 162.341] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice
[ 162.341] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C52F.0003/input/input7/event7"
[ 162.341] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 11)
[ 162.341] (**) Option "AccelerationScheme" "none"
[ 162.341] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0
[ 162.341] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000
[ 162.341] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4
[ 162.343] (II) event7 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 162.343] (II) event7 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 162.345] (II) config/udev: Adding input device EST Gaming keyboard (/dev/input/event8)
[ 162.345] (**) EST Gaming keyboard: Applying InputClass "libinput keyboard catchall"
[ 162.345] (II) Using input driver 'libinput' for 'EST Gaming keyboard'
[ 162.347] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 22 paused 0
[ 162.347] (**) EST Gaming keyboard: always reports core events
[ 162.347] (**) Option "Device" "/dev/input/event8"
[ 162.347] (**) Option "_source" "server/udev"
[ 162.349] (II) event8 - EST Gaming keyboard: is tagged by udev as: Keyboard
[ 162.349] (II) event8 - EST Gaming keyboard: device is a keyboard
[ 162.349] (II) event8 - EST Gaming keyboard: device removed
[ 162.350] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.0/0003:0665:6000.0004/input/input10/event8"
[ 162.350] (II) XINPUT: Adding extended input device "EST Gaming keyboard" (type: KEYBOARD, id 12)
[ 162.353] (II) event8 - EST Gaming keyboard: is tagged by udev as: Keyboard
[ 162.353] (II) event8 - EST Gaming keyboard: device is a keyboard
[ 162.354] (II) config/udev: Adding input device EST Gaming keyboard (/dev/input/event9)
[ 162.354] (**) EST Gaming keyboard: Applying InputClass "libinput keyboard catchall"
[ 162.354] (II) Using input driver 'libinput' for 'EST Gaming keyboard'
[ 162.356] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 23 paused 0
[ 162.356] (**) EST Gaming keyboard: always reports core events
[ 162.356] (**) Option "Device" "/dev/input/event9"
[ 162.356] (**) Option "_source" "server/udev"
[ 162.359] (II) event9 - EST Gaming keyboard: is tagged by udev as: Keyboard
[ 162.359] (II) event9 - EST Gaming keyboard: device is a keyboard
[ 162.359] (II) event9 - EST Gaming keyboard: device removed
[ 162.359] (II) libinput: EST Gaming keyboard: needs a virtual subdevice
[ 162.359] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.1/0003:0665:6000.0005/input/input11/event9"
[ 162.359] (II) XINPUT: Adding extended input device "EST Gaming keyboard" (type: MOUSE, id 13)
[ 162.359] (**) Option "AccelerationScheme" "none"
[ 162.359] (**) EST Gaming keyboard: (accel) selected scheme none/0
[ 162.359] (**) EST Gaming keyboard: (accel) acceleration factor: 2.000
[ 162.359] (**) EST Gaming keyboard: (accel) acceleration threshold: 4
[ 162.362] (II) event9 - EST Gaming keyboard: is tagged by udev as: Keyboard
[ 162.362] (II) event9 - EST Gaming keyboard: device is a keyboard
[ 162.363] (II) config/udev: Adding input device EST Gaming keyboard (/dev/input/event10)
[ 162.363] (**) EST Gaming keyboard: Applying InputClass "libinput keyboard catchall"
[ 162.363] (II) Using input driver 'libinput' for 'EST Gaming keyboard'
[ 162.365] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 24 paused 0
[ 162.365] (**) EST Gaming keyboard: always reports core events
[ 162.365] (**) Option "Device" "/dev/input/event10"
[ 162.365] (**) Option "_source" "server/udev"
[ 162.368] (II) event10 - EST Gaming keyboard: is tagged by udev as: Keyboard
[ 162.368] (II) event10 - EST Gaming keyboard: device is a keyboard
[ 162.368] (II) event10 - EST Gaming keyboard: device removed
[ 162.368] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.2/0003:0665:6000.0006/input/input12/event10"
[ 162.368] (II) XINPUT: Adding extended input device "EST Gaming keyboard" (type: KEYBOARD, id 14)
[ 162.371] (II) event10 - EST Gaming keyboard: is tagged by udev as: Keyboard
[ 162.371] (II) event10 - EST Gaming keyboard: device is a keyboard
[ 162.372] (II) config/udev: Adding input device MSI MYSTIC LIGHT (/dev/input/event5)
[ 162.372] (II) No input driver specified, ignoring this device.
[ 162.372] (II) This device may have been added with another device file.
[ 162.372] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 162.372] (II) No input driver specified, ignoring this device.
[ 162.372] (II) This device may have been added with another device file.
[ 162.376] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 162.376] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 162.376] (II) systemd-logind: returning pre-existing fd for /dev/input/event7 13:71
[ 162.377] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 162.377] (**) Option "Device" "/dev/input/event7"
[ 162.377] (**) Option "_source" "_driver/libinput"
[ 162.377] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice
[ 162.377] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C52F.0003/input/input7/event7"
[ 162.377] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 15)
[ 162.377] (**) EST Gaming keyboard: Applying InputClass "libinput keyboard catchall"
[ 162.377] (II) Using input driver 'libinput' for 'EST Gaming keyboard'
[ 162.377] (II) systemd-logind: returning pre-existing fd for /dev/input/event9 13:73
[ 162.377] (**) EST Gaming keyboard: always reports core events
[ 162.377] (**) Option "Device" "/dev/input/event9"
[ 162.377] (**) Option "_source" "_driver/libinput"
[ 162.377] (II) libinput: EST Gaming keyboard: is a virtual subdevice
[ 162.377] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.1/0003:0665:6000.0005/input/input11/event9"
[ 162.377] (II) XINPUT: Adding extended input device "EST Gaming keyboard" (type: KEYBOARD, id 16)
[ 162.446] (**) Option "fd" "14"
[ 162.446] (II) event2 - Power Button: device removed
[ 162.446] (**) Option "fd" "17"
[ 162.446] (II) event4 - Video Bus: device removed
[ 162.447] (**) Option "fd" "18"
[ 162.447] (II) event1 - Power Button: device removed
[ 162.447] (**) Option "fd" "19"
[ 162.447] (II) event0 - Sleep Button: device removed
[ 162.447] (**) Option "fd" "20"
[ 162.447] (II) event6 - Logitech USB Receiver: device removed
[ 162.447] (**) Option "fd" "21"
[ 162.447] (**) Option "fd" "22"
[ 162.447] (II) event8 - EST Gaming keyboard: device removed
[ 162.447] (**) Option "fd" "23"
[ 162.447] (**) Option "fd" "24"
[ 162.447] (II) event10 - EST Gaming keyboard: device removed
[ 162.447] (**) Option "fd" "21"
[ 162.447] (II) event7 - Logitech USB Receiver Consumer Control: device removed
[ 162.447] (**) Option "fd" "23"
[ 162.447] (II) event9 - EST Gaming keyboard: device removed
[ 162.456] (II) UnloadModule: "libinput"
[ 162.456] (II) systemd-logind: not releasing fd for 13:73, still in use
[ 162.456] (II) UnloadModule: "libinput"
[ 162.456] (II) systemd-logind: not releasing fd for 13:71, still in use
[ 162.456] (II) UnloadModule: "libinput"
[ 162.456] (II) systemd-logind: releasing fd for 13:74
[ 162.487] (II) UnloadModule: "libinput"
[ 162.487] (II) systemd-logind: releasing fd for 13:73
[ 162.527] (II) UnloadModule: "libinput"
[ 162.527] (II) systemd-logind: releasing fd for 13:72
[ 162.553] (II) UnloadModule: "libinput"
[ 162.554] (II) systemd-logind: releasing fd for 13:71
[ 162.593] (II) UnloadModule: "libinput"
[ 162.594] (II) systemd-logind: releasing fd for 13:70
[ 162.647] (II) UnloadModule: "libinput"
[ 162.647] (II) systemd-logind: releasing fd for 13:64
[ 162.673] (II) UnloadModule: "libinput"
[ 162.674] (II) systemd-logind: releasing fd for 13:65
[ 162.700] (II) UnloadModule: "libinput"
[ 162.700] (II) systemd-logind: releasing fd for 13:68
[ 162.754] (II) UnloadModule: "libinput"
[ 162.754] (II) systemd-logind: releasing fd for 13:66
[ 162.834] (II) Server terminated successfully (0). Closing log file.
I think that I need to install a driver for Xorg
Last edited by lenhuppe (2018-12-18 04:44:41)
Why do we drive on the parkway and then park in the driveway?
Offline
I think that I need to install a driver for Xorg
No, you don't.
[ 162.834] (II) Server terminated successfully (0). Closing log file.
Xorg is running just fine. You are just not telling it to do anything. Post your ~/.xinitrc.
Last edited by Trilby (2018-12-18 05:03:52)
"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" - Richard Stallman
Offline
I don't have a ~/.xinitrc file. Please allow me to back up and explain what I am doing here.
Prior to this i7 system I had an AMD FX cpu with a Radeon video card. Setting up Gnome was very simple:
$ sudo pacman -Sy xorg-server xorg-xinit gnome gnome-tweaks
$ sudo systemctl enable gdm
I have now switched from BIOS/Grub to UEFI/systemd-boot.
I have also compiled the mainline kernel per the advice given here.
Having said all of that, I now have a fresh system with the mainline kernel compiled and installed. I am not sure of the best way to go about setting up systemd-boot to load the mainline kernel. I am also not fully versed on how that will impact the X and Gnome installation scripts when I run pacman.
Thanks!
Why do we drive on the parkway and then park in the driveway?
Offline
I don't have a ~/.xinitrc file.
Then that perfectly explains your symptoms. Create one.
"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" - Richard Stallman
Offline
These links cover using startx to start gnome Xinit#xinitrc GNOME#Xorg_sessions
Edit:
If you want to use GDM I would suggest starting without having enabled the service and seeing if it starts a Wayland display server.
Last edited by loqs (2018-12-18 17:37:28)
Offline
$ sudo pacman -Sy [...]
Don't do this.
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Offline
Thank you for pointing out that mistake. I knew better but didn't do better.
Why do we drive on the parkway and then park in the driveway?
Offline
Voila! The mainline lernel was the answer.
This is no doubt the nicest Linux box I have ever seen or used.
I am indebted to all who have helped me get to this point.
I will pass along the favor ...
Last edited by lenhuppe (2018-12-20 12:43:41)
Why do we drive on the parkway and then park in the driveway?
Offline
Pages: 1