You are not logged in.

#1 2007-04-17 14:11:41

axelgenus
Member
From: Italy
Registered: 2007-04-15
Posts: 88
Website

HP nx7400

Hi guys,

I own the laptop in the subject. Everything works fine except two things:

- I can't suspend the laptop (either to RAM or to disk); sad
- The audio buttons on the keyboard don't work.

For more information about my laptop visit this site: http://emisca.altervista.org/nx7400; I have the same model.

It seems like S2RAM makes suspend to work under Ubuntu but now I'm using Arch and I want to keep it. The audio buttons worked in every distros I tried... how can I configure them?

Thanks, axelgenus.

Offline

#2 2007-04-17 17:17:08

peterk0
Member
Registered: 2006-07-19
Posts: 34

Re: HP nx7400

hey,

1, suspend is almost always a kernel issue (assuming it worked with other distros), maybe try different one
2, for the multimedia keys, maybe these will help
http://gentoo-wiki.com/HARDWARE_Dell_XPS_M1210#Keyboard
http://gentoo-wiki.com/HARDWARE_Gentoo_ … _under_X11
it's not exactly for your laptop, but you'll hopefully get the idea

Offline

#3 2007-04-17 17:33:35

axelgenus
Member
From: Italy
Registered: 2007-04-15
Posts: 88
Website

Re: HP nx7400

peterk0 wrote:

suspend is almost always a kernel issue (assuming it worked with other distros), maybe try different one

Yes, I know but it seems that with S2RAM it fully works. Do you know if usermode suspend is implemented in version 0.8 (voodoo)?

peterk0 wrote:

for the multimedia keys, maybe these will help [...] it's not exactly for your laptop, but you'll hopefully get the idea

Thanks a lot. It was quite simple since I'm using GNOME and it has the "shortcut keys" function... big_smile

Offline

#4 2007-04-18 07:14:41

axelgenus
Member
From: Italy
Registered: 2007-04-15
Posts: 88
Website

Re: HP nx7400

Ehm... I noticed a small problem with multimedia keys. When I raise or lower the volume with those keys it works. When I push the "mute" button it seems like the master volume is muted (I checked in the mixer) but I can still hear sound from various application as Exaile! and Flash... what's wrong?

Offline

#5 2007-04-19 17:46:46

axelgenus
Member
From: Italy
Registered: 2007-04-15
Posts: 88
Website

Re: HP nx7400

It seems like the problems is relative to the mixer itself. When I push the "mute" button, it lights up and the volume icon near the clock says the master volume is muted but it isn't. If I click over it, the volume really gets muted!

Last edited by axelgenus (2007-04-19 17:48:40)

Offline

#6 2007-04-19 20:46:09

pelle.k
Member
From: Åre, Sweden (EU)
Registered: 2006-04-30
Posts: 667

Re: HP nx7400

- I can't suspend the laptop (either to RAM or to disk)

powersave package. activate the powersaved daemon at startup. it will start hal, dbus an acpid automatically (so remove them from rc.conf). You will have to be a member of power gruop. (usermod -aG power <username>)
then, "powersave -u" to suspend. edit /etc/powersave/sleep if it doesn't work. "bad" modules might need to be unloaded...


"Your beliefs can be like fences that surround you.
You must first see them or you will not even realize that you are not free, simply because you will not see beyond the fences.
They will represent the boundaries of your experience."

SETH / Jane Roberts

Offline

#7 2007-04-19 21:30:59

axelgenus
Member
From: Italy
Registered: 2007-04-15
Posts: 88
Website

Re: HP nx7400

Thank you pelle.k. I will try tomorrow then I'll let you know the results... wink

Offline

#8 2007-04-20 18:41:47

axelgenus
Member
From: Italy
Registered: 2007-04-15
Posts: 88
Website

Re: HP nx7400

Unfortunately "powersave -u" didn't work. Well, the laptop suspended but didn't resumed: as usual the screen doesn't turn on and the keyboard seems dead (I was in the terminal so I tried to write "reboot" but nothing happened).

I attach the /var/log/suspend2ram.log -- I hope it can help. sad

suspend2ram initiated: 2007-04-20 20:29:04
Debug info follows here, please include in your bug reports. Thanks.
--------------------------------------------------------------------
Loaded modules:
Module                  Size  Used by
udf                    79748  0 
ipv6                  252864  11 
i915                   21504  0 
drm                    70804  1 i915
michael_mic             2816  4 
arc4                    2304  4 
ecb                     3072  4 
ieee80211_crypt_tkip    10624  2 
aes                    28480  1 
ieee80211_crypt_ccmp     6912  1 
cpufreq_userspace       3664  0 
cpufreq_powersave       1920  0 
ext2                   57352  1 
eth1394                16772  0 
joydev                  8384  0 
snd_seq_oss            29184  0 
snd_seq_midi_event      6528  1 snd_seq_oss
snd_seq                46928  4 snd_seq_oss,snd_seq_midi_event
snd_seq_device          6796  2 snd_seq_oss,snd_seq
ppdev                   7556  0 
pcmcia                 31404  0 
usbhid                 34592  0 
hid                    25088  1 usbhid
lp                      9604  0 
snd_pcm_oss            39072  0 
ff_memless              5256  1 usbhid
rtc                    10416  0 
snd_mixer_oss          14464  1 snd_pcm_oss
ohci1394               31920  0 
ieee1394               84056  2 eth1394,ohci1394
yenta_socket           23564  1 
rsrc_nonstatic         11264  1 yenta_socket
pcmcia_core            33176  3 pcmcia,yenta_socket,rsrc_nonstatic
parport_pc             35940  1 
parport                31176  3 ppdev,lp,parport_pc
sg                     26652  0 
ehci_hcd               29964  0 
tsdev                   6336  0 
pcspkr                  2816  0 
psmouse                35336  0 
serio_raw               5636  0 
snd_hda_intel          16408  0 
snd_hda_codec         205184  1 snd_hda_intel
snd_pcm                68740  3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer              19204  2 snd_seq,snd_pcm
snd                    43876  9 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
soundcore               6496  1 snd
snd_page_alloc          7944  2 snd_hda_intel,snd_pcm
intel_agp              21276  1 
agpgart                26200  2 drm,intel_agp
uhci_hcd               21520  0 
fuse                   39188  0 
ipw3945               202788  1 
ieee80211              30536  1 ipw3945
ieee80211_crypt         4992  3 ieee80211_crypt_tkip,ieee80211_crypt_ccmp,ieee80211
b44                    23308  0 
mii                     4992  1 b44
evdev                   8192  4 
cpufreq_ondemand        6924  1 
cpufreq_conservative     6280  0 
cpufreq_stats           5272  0 
acpi_cpufreq            7208  1 
freq_table              4240  3 cpufreq_ondemand,cpufreq_stats,acpi_cpufreq
video                  13828  0 
thermal                11400  0 
processor              24016  2 acpi_cpufreq,thermal
fan                     3716  0 
button                  6032  0 
battery                 8324  0 
ac                      3972  0 
usbcore               112392  4 usbhid,ehci_hcd,uhci_hcd
ext3                  119176  2 
jbd                    55336  1 ext3
mbcache                 7044  2 ext2,ext3
sd_mod                 16768  5 
sr_mod                 14372  0 
cdrom                  34464  1 sr_mod
ata_piix               11908  0 
ahci                   18436  4 
ata_generic             5380  0 
libata                 94228  3 ata_piix,ahci,ata_generic

Memory info:
             total       used       free     shared    buffers     cached
Mem:       1027424     684000     343424          0      56028     582280
-/+ buffers/cache:      45692     981732
Swap:      2104504          0    2104504

/proc/cmdline: root=/dev/sda3 ro quiet vga=792
------------------------------------------------------------------------------
========we are going to sleep, preparing.========
== checking runlevel ==
  no shutdown/reboot in progress, good.
== Unmounting FAT/NTFS filesystems: ==
  none found in /etc/mtab
== FAT/NTFS filesystems unmounted ==
Stopping services: ('netfs network cups alsa' configured)
stopping netfs:
##  stty: standard input: Inappropriate ioctl for device
##  [1;34m:: [1;37mUnmounting Network Filesystems[1;0m [s[-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m 
stopping network:
##  stty: standard input: Inappropriate ioctl for device
##  stty: standard input: Inappropriate ioctl for device
##  [1;34m:: [1;37mShutting down interface: eth2[1;0m [s[-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m 
##  [1;34m:: [1;37mStopping Network[1;0m [s[-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m 
stopping alsa:
##  stty: standard input: Inappropriate ioctl for device
##  [1;34m:: [1;37mSaving ALSA Levels[1;0m [s[-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m 
ejecting PCMCIA cards...

------------------------------------------------------------------------------
Unloading modules: ('prism54 ' configured)
checking prism54
------------------------------------------------------------------------------
prepare_sleep finished for suspend2ram
------------------------------------------------------------------------------
/usr/sbin/s2ram not found, falling back to echo.
==== finished, return code 0 ====
========we are back from suspend, cleaning up.========

== restore_after_sleep: restart and reload everything ==

Resuming:
---------
switched back to console: ' 1'
reactivating ACPI fan C327

Reloading modules:
inserting PCMCIA cards...

Restarting services:
starting alsa:
##  stty: standard input: Inappropriate ioctl for device
##  [1;34m:: [1;37mRestoring ALSA Levels[1;0m [s[-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m 
starting network:
##  stty: standard input: Inappropriate ioctl for device
##  stty: standard input: Inappropriate ioctl for device
##  [1;34m:: [1;37mStarting network profile: home[1;0m [s[-9G   [1;34m[[0;36mBUSY[1;34m][1;0m Error, eth2: dhcpcd already running (/var/run/dhcpcd-eth2.pid)
##  [-9G   [1;34m[[1;31mFAIL[1;34m][1;0m 
##  [1;34m:: [1;37mStarting Network[1;0m [s[-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m 
starting netfs:
##  stty: standard input: Inappropriate ioctl for device
##  [1;34m:: [1;37mMounting Network Filesystems[1;0m [s[-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m 

Remounting filesystems:
  not necessary.

======================================
restore_after_suspend_to_ram: finished

It looks for s2ram... what package includes s2ram? The one in AUR doesn't recognize my laptop model and doesn't suspend it.

Last edited by axelgenus (2007-04-20 18:46:12)

Offline

#9 2007-04-20 18:57:29

pelle.k
Member
From: Åre, Sweden (EU)
Registered: 2006-04-30
Posts: 667

Re: HP nx7400

You will _not_ need s2ram.

Unloading modules: ('prism54 ' configured)

As i said earlier on, edit /etc/powersave/sleep. I also told you a bad module would probably mess things up, so go ahead and empty that "" array wich unloads modules during "suspend to ram". "" (empty) means unload all. I would go for that...


"Your beliefs can be like fences that surround you.
You must first see them or you will not even realize that you are not free, simply because you will not see beyond the fences.
They will represent the boundaries of your experience."

SETH / Jane Roberts

Offline

#10 2007-04-20 21:37:54

axelgenus
Member
From: Italy
Registered: 2007-04-15
Posts: 88
Website

Re: HP nx7400

pelle.k wrote:

As i said earlier on, edit /etc/powersave/sleep. I also told you a bad module would probably mess things up, so go ahead and empty that "" array wich unloads modules during "suspend to ram". "" (empty) means unload all. I would go for that...

Ok, I've tried again with those modifications but the result didn't change:

suspend2ram initiated: 2007-04-20 23:26:15
Debug info follows here, please include in your bug reports. Thanks.
--------------------------------------------------------------------
Loaded modules:
Module                  Size  Used by
isofs                  31168  0 
zlib_inflate           14848  1 isofs
nls_cp437               5888  0 
vfat                   10624  0 
fat                    46108  1 vfat
usb_storage            78272  0 
ide_core              108744  1 usb_storage
ipv6                  252864  13 
i915                   21504  0 
drm                    70804  1 i915
michael_mic             2816  4 
arc4                    2304  4 
ecb                     3072  4 
ieee80211_crypt_tkip    10624  2 
aes                    28480  1 
ieee80211_crypt_ccmp     6912  1 
cpufreq_userspace       3664  0 
cpufreq_powersave       1920  0 
ext2                   57352  1 
eth1394                16772  0 
joydev                  8384  0 
usbhid                 34592  0 
hid                    25088  1 usbhid
ff_memless              5256  1 usbhid
snd_seq_oss            29184  0 
snd_seq_midi_event      6528  1 snd_seq_oss
snd_seq                46928  4 snd_seq_oss,snd_seq_midi_event
snd_seq_device          6796  2 snd_seq_oss,snd_seq
pcmcia                 31404  0 
snd_pcm_oss            39072  0 
snd_mixer_oss          14464  1 snd_pcm_oss
ohci1394               31920  0 
ieee1394               84056  2 eth1394,ohci1394
ppdev                   7556  0 
yenta_socket           23564  1 
rsrc_nonstatic         11264  1 yenta_socket
pcmcia_core            33176  3 pcmcia,yenta_socket,rsrc_nonstatic
lp                      9604  0 
rtc                    10416  0 
sg                     26652  0 
parport_pc             35940  1 
parport                31176  3 ppdev,lp,parport_pc
ehci_hcd               29964  0 
psmouse                35336  0 
pcspkr                  2816  0 
serio_raw               5636  0 
snd_hda_intel          16408  0 
snd_hda_codec         205184  1 snd_hda_intel
snd_pcm                68740  3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer              19204  2 snd_seq,snd_pcm
snd                    43876  9 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
soundcore               6496  1 snd
snd_page_alloc          7944  2 snd_hda_intel,snd_pcm
intel_agp              21276  1 
agpgart                26200  2 drm,intel_agp
tsdev                   6336  0 
uhci_hcd               21520  0 
fuse                   39188  0 
ipw3945               202788  1 
ieee80211              30536  1 ipw3945
ieee80211_crypt         4992  3 ieee80211_crypt_tkip,ieee80211_crypt_ccmp,ieee80211
b44                    23308  0 
mii                     4992  1 b44
evdev                   8192  4 
cpufreq_ondemand        6924  1 
cpufreq_conservative     6280  0 
cpufreq_stats           5272  0 
acpi_cpufreq            7208  1 
freq_table              4240  3 cpufreq_ondemand,cpufreq_stats,acpi_cpufreq
video                  13828  0 
thermal                11400  0 
processor              24016  2 acpi_cpufreq,thermal
fan                     3716  0 
button                  6032  0 
battery                 8324  0 
ac                      3972  0 
usbcore               112392  5 usb_storage,usbhid,ehci_hcd,uhci_hcd
ext3                  119176  2 
jbd                    55336  1 ext3
mbcache                 7044  2 ext2,ext3
sr_mod                 14372  0 
cdrom                  34464  1 sr_mod
sd_mod                 16768  5 
ata_piix               11908  0 
ahci                   18436  4 
ata_generic             5380  0 
libata                 94228  3 ata_piix,ahci,ata_generic

Memory info:
             total       used       free     shared    buffers     cached
Mem:       1027424     736788     290636          0      17580     670368
-/+ buffers/cache:      48840     978584
Swap:      2104504          0    2104504

/proc/cmdline: root=/dev/sda3 ro quiet vga=792
------------------------------------------------------------------------------
========we are going to sleep, preparing.========
== checking runlevel ==
  no shutdown/reboot in progress, good.
== Unmounting FAT/NTFS filesystems: ==
  none found in /etc/mtab
== FAT/NTFS filesystems unmounted ==
Stopping services: ('netfs network cups alsa' configured)
stopping netfs:
##  stty: standard input: Inappropriate ioctl for device
##  [1;34m:: [1;37mUnmounting Network Filesystems[1;0m [s[-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m 
stopping network:
##  stty: standard input: Inappropriate ioctl for device
##  stty: standard input: Inappropriate ioctl for device
##  [1;34m:: [1;37mShutting down interface: eth2[1;0m [s[-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m 
##  [1;34m:: [1;37mStopping Network[1;0m [s[-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m 
stopping alsa:
##  stty: standard input: Inappropriate ioctl for device
##  [1;34m:: [1;37mSaving ALSA Levels[1;0m [s[-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m 
ejecting PCMCIA cards...

------------------------------------------------------------------------------
Unloading modules: ('usb_storage sbp2 ohci_hcd uhci_hcd stir4200 ohci1394 ipw2200 rt2500 prism54 ath_pci r8169 lt_modem Intel536 Intel537 ndiswrapper' configured)
checking usb_storage
# trying to unload: usb_storage
unloaded: usb_storage
checking sbp2
checking ohci_hcd
checking uhci_hcd
# trying to unload: uhci_hcd
unloaded: uhci_hcd
checking stir4200
checking ohci1394
# trying to unload: ohci1394
unloaded: ohci1394
checking ipw2200
checking rt2500
checking prism54
checking ath_pci
checking r8169
checking lt_modem
checking Intel536
checking Intel537
checking ndiswrapper
------------------------------------------------------------------------------
prepare_sleep finished for suspend2ram
------------------------------------------------------------------------------
/usr/sbin/s2ram not found, falling back to echo.
==== finished, return code 0 ====
========we are back from suspend, cleaning up.========

== restore_after_sleep: restart and reload everything ==

Resuming:
---------
switched back to console: ' 1'
reactivating ACPI fan C327

Reloading modules:
  ohci1394
  uhci_hcd
  usb_storage
inserting PCMCIA cards...

Restarting services:
starting alsa:
##  stty: standard input: Inappropriate ioctl for device
##  [1;34m:: [1;37mRestoring ALSA Levels[1;0m [s[-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m 
starting network:
##  stty: standard input: Inappropriate ioctl for device
##  stty: standard input: Inappropriate ioctl for device
##  [1;34m:: [1;37mStarting network profile: home[1;0m [s[-9G   [1;34m[[0;36mBUSY[1;34m][1;0m Error, eth2: dhcpcd already running (/var/run/dhcpcd-eth2.pid)
##  [-9G   [1;34m[[1;31mFAIL[1;34m][1;0m 
##  [1;34m:: [1;37mStarting Network[1;0m [s[-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m 
starting netfs:
##  stty: standard input: Inappropriate ioctl for device
##  [1;34m:: [1;37mMounting Network Filesystems[1;0m [s[-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m 

Remounting filesystems:
  not necessary.

======================================
restore_after_suspend_to_ram: finished

This is the /var/log/messages.log:

Apr 20 23:26:16 coreblack usbcore: deregistering interface driver usb-storage
Apr 20 23:26:16 coreblack uhci_hcd 0000:00:1d.3: remove, state 1
Apr 20 23:26:16 coreblack usb usb4: USB disconnect, address 1
Apr 20 23:26:16 coreblack uhci_hcd 0000:00:1d.3: USB bus 4 deregistered
Apr 20 23:26:16 coreblack ACPI: PCI interrupt for device 0000:00:1d.3 disabled
Apr 20 23:26:16 coreblack uhci_hcd 0000:00:1d.2: remove, state 1
Apr 20 23:26:16 coreblack usb usb3: USB disconnect, address 1
Apr 20 23:26:16 coreblack uhci_hcd 0000:00:1d.2: USB bus 3 deregistered
Apr 20 23:26:16 coreblack ACPI: PCI interrupt for device 0000:00:1d.2 disabled
Apr 20 23:26:16 coreblack uhci_hcd 0000:00:1d.1: remove, state 1
Apr 20 23:26:16 coreblack usb usb2: USB disconnect, address 1
Apr 20 23:26:16 coreblack usb 2-2: USB disconnect, address 3
Apr 20 23:26:16 coreblack uhci_hcd 0000:00:1d.1: USB bus 2 deregistered
Apr 20 23:26:16 coreblack ACPI: PCI interrupt for device 0000:00:1d.1 disabled
Apr 20 23:26:16 coreblack uhci_hcd 0000:00:1d.0: remove, state 1
Apr 20 23:26:16 coreblack usb usb1: USB disconnect, address 1
Apr 20 23:26:16 coreblack uhci_hcd 0000:00:1d.0: USB bus 1 deregistered
Apr 20 23:26:16 coreblack ACPI: PCI interrupt for device 0000:00:1d.0 disabled
Apr 20 23:26:16 coreblack Disabling non-boot CPUs ...
Apr 20 23:26:16 coreblack Breaking affinity for irq 16
Apr 20 23:26:17 coreblack CPU 1 is now offline
Apr 20 23:26:17 coreblack SMP alternatives: switching to UP code
Apr 20 23:26:17 coreblack CPU1 is down
Apr 20 23:26:28 coreblack Stopping tasks ... done.
Apr 20 23:26:28 coreblack Suspending console(s)
Apr 20 23:26:28 coreblack pnp: Device 00:02 disabled.
Apr 20 23:26:28 coreblack ACPI: PCI interrupt for device 0000:02:0e.0 disabled
Apr 20 23:26:28 coreblack eth2: Going into suspend...
Apr 20 23:26:28 coreblack ACPI: PCI interrupt for device 0000:10:00.0 disabled
Apr 20 23:26:28 coreblack ACPI: PCI interrupt for device 0000:00:1f.2 disabled
Apr 20 23:26:28 coreblack ACPI: PCI interrupt for device 0000:00:1f.1 disabled
Apr 20 23:26:28 coreblack ACPI: PCI interrupt for device 0000:00:1d.7 disabled
Apr 20 23:26:28 coreblack ACPI: PCI interrupt for device 0000:00:1b.0 disabled
Apr 20 23:26:28 coreblack Intel machine check architecture supported.
Apr 20 23:26:28 coreblack Intel machine check reporting enabled on CPU#0.
Apr 20 23:26:28 coreblack ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
Apr 20 23:26:28 coreblack ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
Apr 20 23:26:28 coreblack PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
Apr 20 23:26:28 coreblack ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
Apr 20 23:26:28 coreblack ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
Apr 20 23:26:28 coreblack ata6: port disabled. ignoring.
Apr 20 23:26:28 coreblack ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 17 (level, low) -> IRQ 17
Apr 20 23:26:28 coreblack eth2: Coming out of suspend...
Apr 20 23:26:28 coreblack PCI: Enabling device 0000:10:00.0 (0000 -> 0002)
Apr 20 23:26:28 coreblack ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
Apr 20 23:26:28 coreblack ACPI: PCI Interrupt 0000:02:06.1[b] -> GSI 19 (level, low) -> IRQ 18
Apr 20 23:26:28 coreblack ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 16
Apr 20 23:26:28 coreblack pnp: Device 00:02 activated.
Apr 20 23:26:28 coreblack pnp: Device 00:08 does not support activation.
Apr 20 23:26:28 coreblack pnp: Device 00:09 does not support activation.
Apr 20 23:26:28 coreblack ata2: SATA link down (SStatus 0 SControl 0)
Apr 20 23:26:28 coreblack ata3: SATA link down (SStatus 0 SControl 0)
Apr 20 23:26:28 coreblack ata4: SATA link down (SStatus 0 SControl 0)
Apr 20 23:26:28 coreblack ata5: soft resetting port
Apr 20 23:26:28 coreblack Restarting tasks ... done.
Apr 20 23:26:28 coreblack Enabling non-boot CPUs ...
Apr 20 23:26:29 coreblack SMP alternatives: switching to SMP code
Apr 20 23:26:29 coreblack Booting processor 1/1 eip 3000
Apr 20 23:26:29 coreblack Initializing CPU#1
Apr 20 23:26:29 coreblack Calibrating delay using timer specific routine.. 3325.12 BogoMIPS (lpj=6650253)
Apr 20 23:26:29 coreblack monitor/mwait feature present.
Apr 20 23:26:29 coreblack CPU: L1 I cache: 32K, L1 D cache: 32K
Apr 20 23:26:29 coreblack CPU: L2 cache: 2048K
Apr 20 23:26:29 coreblack CPU: Physical Processor ID: 0
Apr 20 23:26:29 coreblack CPU: Processor Core ID: 1
Apr 20 23:26:29 coreblack Intel machine check architecture supported.
Apr 20 23:26:29 coreblack Intel machine check reporting enabled on CPU#1.
Apr 20 23:26:29 coreblack CPU1: Intel Genuine Intel(R) CPU           T2300  @ 1.66GHz stepping 08
Apr 20 23:26:29 coreblack CPU1 is up
Apr 20 23:26:29 coreblack ata5.00: configured for MWDMA2
Apr 20 23:26:29 coreblack ata5: EH complete
Apr 20 23:26:29 coreblack psmouse.c: Failed to enable mouse on isa0060/serio4
Apr 20 23:26:30 coreblack ata1: waiting for device to spin up (7 secs)
Apr 20 23:26:32 coreblack ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
Apr 20 23:26:37 coreblack ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 20 23:26:38 coreblack ata1.00: configured for UDMA/100
Apr 20 23:26:38 coreblack SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
Apr 20 23:26:38 coreblack sda: Write Protect is off
Apr 20 23:26:38 coreblack SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 20 23:26:38 coreblack logger: ACPI group/action undefined: thermal_zone / TZ1
Apr 20 23:26:38 coreblack logger: ACPI group/action undefined: thermal_zone / TZ2
Apr 20 23:26:38 coreblack logger: ACPI group/action undefined: thermal_zone / TZ0
Apr 20 23:26:38 coreblack ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[f4101000-f41017ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
Apr 20 23:26:38 coreblack eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Apr 20 23:26:38 coreblack USB Universal Host Controller Interface driver v3.0
Apr 20 23:26:38 coreblack ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
Apr 20 23:26:38 coreblack uhci_hcd 0000:00:1d.0: UHCI Host Controller
Apr 20 23:26:38 coreblack uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Apr 20 23:26:38 coreblack uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004020
Apr 20 23:26:38 coreblack usb usb1: configuration #1 chosen from 1 choice
Apr 20 23:26:38 coreblack hub 1-0:1.0: USB hub found
Apr 20 23:26:38 coreblack hub 1-0:1.0: 2 ports detected
Apr 20 23:26:38 coreblack ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 17 (level, low) -> IRQ 17
Apr 20 23:26:38 coreblack uhci_hcd 0000:00:1d.1: UHCI Host Controller
Apr 20 23:26:38 coreblack uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Apr 20 23:26:38 coreblack uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004040
Apr 20 23:26:38 coreblack usb usb2: configuration #1 chosen from 1 choice
Apr 20 23:26:38 coreblack hub 2-0:1.0: USB hub found
Apr 20 23:26:38 coreblack hub 2-0:1.0: 2 ports detected
Apr 20 23:26:38 coreblack ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
Apr 20 23:26:38 coreblack uhci_hcd 0000:00:1d.2: UHCI Host Controller
Apr 20 23:26:38 coreblack uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Apr 20 23:26:38 coreblack uhci_hcd 0000:00:1d.2: irq 19, io base 0x00004060
Apr 20 23:26:38 coreblack usb usb3: configuration #1 chosen from 1 choice
Apr 20 23:26:38 coreblack hub 3-0:1.0: USB hub found
Apr 20 23:26:38 coreblack hub 3-0:1.0: 2 ports detected
Apr 20 23:26:39 coreblack ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 18
Apr 20 23:26:39 coreblack uhci_hcd 0000:00:1d.3: UHCI Host Controller
Apr 20 23:26:39 coreblack uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Apr 20 23:26:39 coreblack uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004080
Apr 20 23:26:39 coreblack usb usb4: configuration #1 chosen from 1 choice
Apr 20 23:26:39 coreblack hub 4-0:1.0: USB hub found
Apr 20 23:26:39 coreblack hub 4-0:1.0: 2 ports detected
Apr 20 23:26:39 coreblack usb 2-2: new low speed USB device using uhci_hcd and address 2
Apr 20 23:26:39 coreblack Initializing USB Mass Storage driver...
Apr 20 23:26:39 coreblack usb 2-2: configuration #1 chosen from 1 choice
Apr 20 23:26:39 coreblack input: Logitech USB-PS/2 Optical Mouse as /class/input/input8
Apr 20 23:26:39 coreblack input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2
Apr 20 23:26:39 coreblack usbcore: registered new interface driver usb-storage
Apr 20 23:26:39 coreblack USB Mass Storage support registered.
Apr 20 23:26:39 coreblack ADDRCONF(NETDEV_UP): eth2: link is not ready
Apr 20 23:26:40 coreblack ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready

I've copied the part relative to the suspend/resume routine.

Offline

#11 2007-06-11 15:17:02

zeifertstc
Member
From: Niagara
Registered: 2007-06-04
Posts: 11
Website

Re: HP nx7400

Seeing that Prism54 was the module that was indicated, edit rc.conf and blacklist prism54. I'm guessing you're not actually using it anyways.


Shoot me --> . <--

Offline

Board footer

Powered by FluxBB