You are not logged in.
Pages: 1
Hi guys,
I own the laptop in the subject. Everything works fine except two things:
- I can't suspend the laptop (either to RAM or to disk);
- The audio buttons on the keyboard don't work.
For more information about my laptop visit this site: http://emisca.altervista.org/nx7400; I have the same model.
It seems like S2RAM makes suspend to work under Ubuntu but now I'm using Arch and I want to keep it. The audio buttons worked in every distros I tried... how can I configure them?
Thanks, axelgenus.
Offline
hey,
1, suspend is almost always a kernel issue (assuming it worked with other distros), maybe try different one
2, for the multimedia keys, maybe these will help
http://gentoo-wiki.com/HARDWARE_Dell_XPS_M1210#Keyboard
http://gentoo-wiki.com/HARDWARE_Gentoo_ … _under_X11
it's not exactly for your laptop, but you'll hopefully get the idea
Offline
suspend is almost always a kernel issue (assuming it worked with other distros), maybe try different one
Yes, I know but it seems that with S2RAM it fully works. Do you know if usermode suspend is implemented in version 0.8 (voodoo)?
for the multimedia keys, maybe these will help [...] it's not exactly for your laptop, but you'll hopefully get the idea
Thanks a lot. It was quite simple since I'm using GNOME and it has the "shortcut keys" function...
Offline
Ehm... I noticed a small problem with multimedia keys. When I raise or lower the volume with those keys it works. When I push the "mute" button it seems like the master volume is muted (I checked in the mixer) but I can still hear sound from various application as Exaile! and Flash... what's wrong?
Offline
It seems like the problems is relative to the mixer itself. When I push the "mute" button, it lights up and the volume icon near the clock says the master volume is muted but it isn't. If I click over it, the volume really gets muted!
Last edited by axelgenus (2007-04-19 17:48:40)
Offline
- I can't suspend the laptop (either to RAM or to disk)
powersave package. activate the powersaved daemon at startup. it will start hal, dbus an acpid automatically (so remove them from rc.conf). You will have to be a member of power gruop. (usermod -aG power <username>)
then, "powersave -u" to suspend. edit /etc/powersave/sleep if it doesn't work. "bad" modules might need to be unloaded...
"Your beliefs can be like fences that surround you.
You must first see them or you will not even realize that you are not free, simply because you will not see beyond the fences.
They will represent the boundaries of your experience."
SETH / Jane Roberts
Offline
Thank you pelle.k. I will try tomorrow then I'll let you know the results...
Offline
Unfortunately "powersave -u" didn't work. Well, the laptop suspended but didn't resumed: as usual the screen doesn't turn on and the keyboard seems dead (I was in the terminal so I tried to write "reboot" but nothing happened).
I attach the /var/log/suspend2ram.log -- I hope it can help.
suspend2ram initiated: 2007-04-20 20:29:04
Debug info follows here, please include in your bug reports. Thanks.
--------------------------------------------------------------------
Loaded modules:
Module Size Used by
udf 79748 0
ipv6 252864 11
i915 21504 0
drm 70804 1 i915
michael_mic 2816 4
arc4 2304 4
ecb 3072 4
ieee80211_crypt_tkip 10624 2
aes 28480 1
ieee80211_crypt_ccmp 6912 1
cpufreq_userspace 3664 0
cpufreq_powersave 1920 0
ext2 57352 1
eth1394 16772 0
joydev 8384 0
snd_seq_oss 29184 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 46928 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
ppdev 7556 0
pcmcia 31404 0
usbhid 34592 0
hid 25088 1 usbhid
lp 9604 0
snd_pcm_oss 39072 0
ff_memless 5256 1 usbhid
rtc 10416 0
snd_mixer_oss 14464 1 snd_pcm_oss
ohci1394 31920 0
ieee1394 84056 2 eth1394,ohci1394
yenta_socket 23564 1
rsrc_nonstatic 11264 1 yenta_socket
pcmcia_core 33176 3 pcmcia,yenta_socket,rsrc_nonstatic
parport_pc 35940 1
parport 31176 3 ppdev,lp,parport_pc
sg 26652 0
ehci_hcd 29964 0
tsdev 6336 0
pcspkr 2816 0
psmouse 35336 0
serio_raw 5636 0
snd_hda_intel 16408 0
snd_hda_codec 205184 1 snd_hda_intel
snd_pcm 68740 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 19204 2 snd_seq,snd_pcm
snd 43876 9 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
soundcore 6496 1 snd
snd_page_alloc 7944 2 snd_hda_intel,snd_pcm
intel_agp 21276 1
agpgart 26200 2 drm,intel_agp
uhci_hcd 21520 0
fuse 39188 0
ipw3945 202788 1
ieee80211 30536 1 ipw3945
ieee80211_crypt 4992 3 ieee80211_crypt_tkip,ieee80211_crypt_ccmp,ieee80211
b44 23308 0
mii 4992 1 b44
evdev 8192 4
cpufreq_ondemand 6924 1
cpufreq_conservative 6280 0
cpufreq_stats 5272 0
acpi_cpufreq 7208 1
freq_table 4240 3 cpufreq_ondemand,cpufreq_stats,acpi_cpufreq
video 13828 0
thermal 11400 0
processor 24016 2 acpi_cpufreq,thermal
fan 3716 0
button 6032 0
battery 8324 0
ac 3972 0
usbcore 112392 4 usbhid,ehci_hcd,uhci_hcd
ext3 119176 2
jbd 55336 1 ext3
mbcache 7044 2 ext2,ext3
sd_mod 16768 5
sr_mod 14372 0
cdrom 34464 1 sr_mod
ata_piix 11908 0
ahci 18436 4
ata_generic 5380 0
libata 94228 3 ata_piix,ahci,ata_generic
Memory info:
total used free shared buffers cached
Mem: 1027424 684000 343424 0 56028 582280
-/+ buffers/cache: 45692 981732
Swap: 2104504 0 2104504
/proc/cmdline: root=/dev/sda3 ro quiet vga=792
------------------------------------------------------------------------------
========we are going to sleep, preparing.========
== checking runlevel ==
no shutdown/reboot in progress, good.
== Unmounting FAT/NTFS filesystems: ==
none found in /etc/mtab
== FAT/NTFS filesystems unmounted ==
Stopping services: ('netfs network cups alsa' configured)
stopping netfs:
## stty: standard input: Inappropriate ioctl for device
## [1;34m:: [1;37mUnmounting Network Filesystems[1;0m [s[-9G [1;34m[[0;36mBUSY[1;34m][1;0m [-9G [1;34m[[1;37mDONE[1;34m][1;0m
stopping network:
## stty: standard input: Inappropriate ioctl for device
## stty: standard input: Inappropriate ioctl for device
## [1;34m:: [1;37mShutting down interface: eth2[1;0m [s[-9G [1;34m[[0;36mBUSY[1;34m][1;0m [-9G [1;34m[[1;37mDONE[1;34m][1;0m
## [1;34m:: [1;37mStopping Network[1;0m [s[-9G [1;34m[[0;36mBUSY[1;34m][1;0m [-9G [1;34m[[1;37mDONE[1;34m][1;0m
stopping alsa:
## stty: standard input: Inappropriate ioctl for device
## [1;34m:: [1;37mSaving ALSA Levels[1;0m [s[-9G [1;34m[[0;36mBUSY[1;34m][1;0m [-9G [1;34m[[1;37mDONE[1;34m][1;0m
ejecting PCMCIA cards...
------------------------------------------------------------------------------
Unloading modules: ('prism54 ' configured)
checking prism54
------------------------------------------------------------------------------
prepare_sleep finished for suspend2ram
------------------------------------------------------------------------------
/usr/sbin/s2ram not found, falling back to echo.
==== finished, return code 0 ====
========we are back from suspend, cleaning up.========
== restore_after_sleep: restart and reload everything ==
Resuming:
---------
switched back to console: ' 1'
reactivating ACPI fan C327
Reloading modules:
inserting PCMCIA cards...
Restarting services:
starting alsa:
## stty: standard input: Inappropriate ioctl for device
## [1;34m:: [1;37mRestoring ALSA Levels[1;0m [s[-9G [1;34m[[0;36mBUSY[1;34m][1;0m [-9G [1;34m[[1;37mDONE[1;34m][1;0m
starting network:
## stty: standard input: Inappropriate ioctl for device
## stty: standard input: Inappropriate ioctl for device
## [1;34m:: [1;37mStarting network profile: home[1;0m [s[-9G [1;34m[[0;36mBUSY[1;34m][1;0m Error, eth2: dhcpcd already running (/var/run/dhcpcd-eth2.pid)
## [-9G [1;34m[[1;31mFAIL[1;34m][1;0m
## [1;34m:: [1;37mStarting Network[1;0m [s[-9G [1;34m[[0;36mBUSY[1;34m][1;0m [-9G [1;34m[[1;37mDONE[1;34m][1;0m
starting netfs:
## stty: standard input: Inappropriate ioctl for device
## [1;34m:: [1;37mMounting Network Filesystems[1;0m [s[-9G [1;34m[[0;36mBUSY[1;34m][1;0m [-9G [1;34m[[1;37mDONE[1;34m][1;0m
Remounting filesystems:
not necessary.
======================================
restore_after_suspend_to_ram: finished
It looks for s2ram... what package includes s2ram? The one in AUR doesn't recognize my laptop model and doesn't suspend it.
Last edited by axelgenus (2007-04-20 18:46:12)
Offline
You will _not_ need s2ram.
Unloading modules: ('prism54 ' configured)
As i said earlier on, edit /etc/powersave/sleep. I also told you a bad module would probably mess things up, so go ahead and empty that "" array wich unloads modules during "suspend to ram". "" (empty) means unload all. I would go for that...
"Your beliefs can be like fences that surround you.
You must first see them or you will not even realize that you are not free, simply because you will not see beyond the fences.
They will represent the boundaries of your experience."
SETH / Jane Roberts
Offline
As i said earlier on, edit /etc/powersave/sleep. I also told you a bad module would probably mess things up, so go ahead and empty that "" array wich unloads modules during "suspend to ram". "" (empty) means unload all. I would go for that...
Ok, I've tried again with those modifications but the result didn't change:
suspend2ram initiated: 2007-04-20 23:26:15
Debug info follows here, please include in your bug reports. Thanks.
--------------------------------------------------------------------
Loaded modules:
Module Size Used by
isofs 31168 0
zlib_inflate 14848 1 isofs
nls_cp437 5888 0
vfat 10624 0
fat 46108 1 vfat
usb_storage 78272 0
ide_core 108744 1 usb_storage
ipv6 252864 13
i915 21504 0
drm 70804 1 i915
michael_mic 2816 4
arc4 2304 4
ecb 3072 4
ieee80211_crypt_tkip 10624 2
aes 28480 1
ieee80211_crypt_ccmp 6912 1
cpufreq_userspace 3664 0
cpufreq_powersave 1920 0
ext2 57352 1
eth1394 16772 0
joydev 8384 0
usbhid 34592 0
hid 25088 1 usbhid
ff_memless 5256 1 usbhid
snd_seq_oss 29184 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 46928 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
pcmcia 31404 0
snd_pcm_oss 39072 0
snd_mixer_oss 14464 1 snd_pcm_oss
ohci1394 31920 0
ieee1394 84056 2 eth1394,ohci1394
ppdev 7556 0
yenta_socket 23564 1
rsrc_nonstatic 11264 1 yenta_socket
pcmcia_core 33176 3 pcmcia,yenta_socket,rsrc_nonstatic
lp 9604 0
rtc 10416 0
sg 26652 0
parport_pc 35940 1
parport 31176 3 ppdev,lp,parport_pc
ehci_hcd 29964 0
psmouse 35336 0
pcspkr 2816 0
serio_raw 5636 0
snd_hda_intel 16408 0
snd_hda_codec 205184 1 snd_hda_intel
snd_pcm 68740 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 19204 2 snd_seq,snd_pcm
snd 43876 9 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
soundcore 6496 1 snd
snd_page_alloc 7944 2 snd_hda_intel,snd_pcm
intel_agp 21276 1
agpgart 26200 2 drm,intel_agp
tsdev 6336 0
uhci_hcd 21520 0
fuse 39188 0
ipw3945 202788 1
ieee80211 30536 1 ipw3945
ieee80211_crypt 4992 3 ieee80211_crypt_tkip,ieee80211_crypt_ccmp,ieee80211
b44 23308 0
mii 4992 1 b44
evdev 8192 4
cpufreq_ondemand 6924 1
cpufreq_conservative 6280 0
cpufreq_stats 5272 0
acpi_cpufreq 7208 1
freq_table 4240 3 cpufreq_ondemand,cpufreq_stats,acpi_cpufreq
video 13828 0
thermal 11400 0
processor 24016 2 acpi_cpufreq,thermal
fan 3716 0
button 6032 0
battery 8324 0
ac 3972 0
usbcore 112392 5 usb_storage,usbhid,ehci_hcd,uhci_hcd
ext3 119176 2
jbd 55336 1 ext3
mbcache 7044 2 ext2,ext3
sr_mod 14372 0
cdrom 34464 1 sr_mod
sd_mod 16768 5
ata_piix 11908 0
ahci 18436 4
ata_generic 5380 0
libata 94228 3 ata_piix,ahci,ata_generic
Memory info:
total used free shared buffers cached
Mem: 1027424 736788 290636 0 17580 670368
-/+ buffers/cache: 48840 978584
Swap: 2104504 0 2104504
/proc/cmdline: root=/dev/sda3 ro quiet vga=792
------------------------------------------------------------------------------
========we are going to sleep, preparing.========
== checking runlevel ==
no shutdown/reboot in progress, good.
== Unmounting FAT/NTFS filesystems: ==
none found in /etc/mtab
== FAT/NTFS filesystems unmounted ==
Stopping services: ('netfs network cups alsa' configured)
stopping netfs:
## stty: standard input: Inappropriate ioctl for device
## [1;34m:: [1;37mUnmounting Network Filesystems[1;0m [s[-9G [1;34m[[0;36mBUSY[1;34m][1;0m [-9G [1;34m[[1;37mDONE[1;34m][1;0m
stopping network:
## stty: standard input: Inappropriate ioctl for device
## stty: standard input: Inappropriate ioctl for device
## [1;34m:: [1;37mShutting down interface: eth2[1;0m [s[-9G [1;34m[[0;36mBUSY[1;34m][1;0m [-9G [1;34m[[1;37mDONE[1;34m][1;0m
## [1;34m:: [1;37mStopping Network[1;0m [s[-9G [1;34m[[0;36mBUSY[1;34m][1;0m [-9G [1;34m[[1;37mDONE[1;34m][1;0m
stopping alsa:
## stty: standard input: Inappropriate ioctl for device
## [1;34m:: [1;37mSaving ALSA Levels[1;0m [s[-9G [1;34m[[0;36mBUSY[1;34m][1;0m [-9G [1;34m[[1;37mDONE[1;34m][1;0m
ejecting PCMCIA cards...
------------------------------------------------------------------------------
Unloading modules: ('usb_storage sbp2 ohci_hcd uhci_hcd stir4200 ohci1394 ipw2200 rt2500 prism54 ath_pci r8169 lt_modem Intel536 Intel537 ndiswrapper' configured)
checking usb_storage
# trying to unload: usb_storage
unloaded: usb_storage
checking sbp2
checking ohci_hcd
checking uhci_hcd
# trying to unload: uhci_hcd
unloaded: uhci_hcd
checking stir4200
checking ohci1394
# trying to unload: ohci1394
unloaded: ohci1394
checking ipw2200
checking rt2500
checking prism54
checking ath_pci
checking r8169
checking lt_modem
checking Intel536
checking Intel537
checking ndiswrapper
------------------------------------------------------------------------------
prepare_sleep finished for suspend2ram
------------------------------------------------------------------------------
/usr/sbin/s2ram not found, falling back to echo.
==== finished, return code 0 ====
========we are back from suspend, cleaning up.========
== restore_after_sleep: restart and reload everything ==
Resuming:
---------
switched back to console: ' 1'
reactivating ACPI fan C327
Reloading modules:
ohci1394
uhci_hcd
usb_storage
inserting PCMCIA cards...
Restarting services:
starting alsa:
## stty: standard input: Inappropriate ioctl for device
## [1;34m:: [1;37mRestoring ALSA Levels[1;0m [s[-9G [1;34m[[0;36mBUSY[1;34m][1;0m [-9G [1;34m[[1;37mDONE[1;34m][1;0m
starting network:
## stty: standard input: Inappropriate ioctl for device
## stty: standard input: Inappropriate ioctl for device
## [1;34m:: [1;37mStarting network profile: home[1;0m [s[-9G [1;34m[[0;36mBUSY[1;34m][1;0m Error, eth2: dhcpcd already running (/var/run/dhcpcd-eth2.pid)
## [-9G [1;34m[[1;31mFAIL[1;34m][1;0m
## [1;34m:: [1;37mStarting Network[1;0m [s[-9G [1;34m[[0;36mBUSY[1;34m][1;0m [-9G [1;34m[[1;37mDONE[1;34m][1;0m
starting netfs:
## stty: standard input: Inappropriate ioctl for device
## [1;34m:: [1;37mMounting Network Filesystems[1;0m [s[-9G [1;34m[[0;36mBUSY[1;34m][1;0m [-9G [1;34m[[1;37mDONE[1;34m][1;0m
Remounting filesystems:
not necessary.
======================================
restore_after_suspend_to_ram: finished
This is the /var/log/messages.log:
Apr 20 23:26:16 coreblack usbcore: deregistering interface driver usb-storage
Apr 20 23:26:16 coreblack uhci_hcd 0000:00:1d.3: remove, state 1
Apr 20 23:26:16 coreblack usb usb4: USB disconnect, address 1
Apr 20 23:26:16 coreblack uhci_hcd 0000:00:1d.3: USB bus 4 deregistered
Apr 20 23:26:16 coreblack ACPI: PCI interrupt for device 0000:00:1d.3 disabled
Apr 20 23:26:16 coreblack uhci_hcd 0000:00:1d.2: remove, state 1
Apr 20 23:26:16 coreblack usb usb3: USB disconnect, address 1
Apr 20 23:26:16 coreblack uhci_hcd 0000:00:1d.2: USB bus 3 deregistered
Apr 20 23:26:16 coreblack ACPI: PCI interrupt for device 0000:00:1d.2 disabled
Apr 20 23:26:16 coreblack uhci_hcd 0000:00:1d.1: remove, state 1
Apr 20 23:26:16 coreblack usb usb2: USB disconnect, address 1
Apr 20 23:26:16 coreblack usb 2-2: USB disconnect, address 3
Apr 20 23:26:16 coreblack uhci_hcd 0000:00:1d.1: USB bus 2 deregistered
Apr 20 23:26:16 coreblack ACPI: PCI interrupt for device 0000:00:1d.1 disabled
Apr 20 23:26:16 coreblack uhci_hcd 0000:00:1d.0: remove, state 1
Apr 20 23:26:16 coreblack usb usb1: USB disconnect, address 1
Apr 20 23:26:16 coreblack uhci_hcd 0000:00:1d.0: USB bus 1 deregistered
Apr 20 23:26:16 coreblack ACPI: PCI interrupt for device 0000:00:1d.0 disabled
Apr 20 23:26:16 coreblack Disabling non-boot CPUs ...
Apr 20 23:26:16 coreblack Breaking affinity for irq 16
Apr 20 23:26:17 coreblack CPU 1 is now offline
Apr 20 23:26:17 coreblack SMP alternatives: switching to UP code
Apr 20 23:26:17 coreblack CPU1 is down
Apr 20 23:26:28 coreblack Stopping tasks ... done.
Apr 20 23:26:28 coreblack Suspending console(s)
Apr 20 23:26:28 coreblack pnp: Device 00:02 disabled.
Apr 20 23:26:28 coreblack ACPI: PCI interrupt for device 0000:02:0e.0 disabled
Apr 20 23:26:28 coreblack eth2: Going into suspend...
Apr 20 23:26:28 coreblack ACPI: PCI interrupt for device 0000:10:00.0 disabled
Apr 20 23:26:28 coreblack ACPI: PCI interrupt for device 0000:00:1f.2 disabled
Apr 20 23:26:28 coreblack ACPI: PCI interrupt for device 0000:00:1f.1 disabled
Apr 20 23:26:28 coreblack ACPI: PCI interrupt for device 0000:00:1d.7 disabled
Apr 20 23:26:28 coreblack ACPI: PCI interrupt for device 0000:00:1b.0 disabled
Apr 20 23:26:28 coreblack Intel machine check architecture supported.
Apr 20 23:26:28 coreblack Intel machine check reporting enabled on CPU#0.
Apr 20 23:26:28 coreblack ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
Apr 20 23:26:28 coreblack ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
Apr 20 23:26:28 coreblack PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
Apr 20 23:26:28 coreblack ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
Apr 20 23:26:28 coreblack ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
Apr 20 23:26:28 coreblack ata6: port disabled. ignoring.
Apr 20 23:26:28 coreblack ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 17 (level, low) -> IRQ 17
Apr 20 23:26:28 coreblack eth2: Coming out of suspend...
Apr 20 23:26:28 coreblack PCI: Enabling device 0000:10:00.0 (0000 -> 0002)
Apr 20 23:26:28 coreblack ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
Apr 20 23:26:28 coreblack ACPI: PCI Interrupt 0000:02:06.1[b] -> GSI 19 (level, low) -> IRQ 18
Apr 20 23:26:28 coreblack ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 16
Apr 20 23:26:28 coreblack pnp: Device 00:02 activated.
Apr 20 23:26:28 coreblack pnp: Device 00:08 does not support activation.
Apr 20 23:26:28 coreblack pnp: Device 00:09 does not support activation.
Apr 20 23:26:28 coreblack ata2: SATA link down (SStatus 0 SControl 0)
Apr 20 23:26:28 coreblack ata3: SATA link down (SStatus 0 SControl 0)
Apr 20 23:26:28 coreblack ata4: SATA link down (SStatus 0 SControl 0)
Apr 20 23:26:28 coreblack ata5: soft resetting port
Apr 20 23:26:28 coreblack Restarting tasks ... done.
Apr 20 23:26:28 coreblack Enabling non-boot CPUs ...
Apr 20 23:26:29 coreblack SMP alternatives: switching to SMP code
Apr 20 23:26:29 coreblack Booting processor 1/1 eip 3000
Apr 20 23:26:29 coreblack Initializing CPU#1
Apr 20 23:26:29 coreblack Calibrating delay using timer specific routine.. 3325.12 BogoMIPS (lpj=6650253)
Apr 20 23:26:29 coreblack monitor/mwait feature present.
Apr 20 23:26:29 coreblack CPU: L1 I cache: 32K, L1 D cache: 32K
Apr 20 23:26:29 coreblack CPU: L2 cache: 2048K
Apr 20 23:26:29 coreblack CPU: Physical Processor ID: 0
Apr 20 23:26:29 coreblack CPU: Processor Core ID: 1
Apr 20 23:26:29 coreblack Intel machine check architecture supported.
Apr 20 23:26:29 coreblack Intel machine check reporting enabled on CPU#1.
Apr 20 23:26:29 coreblack CPU1: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08
Apr 20 23:26:29 coreblack CPU1 is up
Apr 20 23:26:29 coreblack ata5.00: configured for MWDMA2
Apr 20 23:26:29 coreblack ata5: EH complete
Apr 20 23:26:29 coreblack psmouse.c: Failed to enable mouse on isa0060/serio4
Apr 20 23:26:30 coreblack ata1: waiting for device to spin up (7 secs)
Apr 20 23:26:32 coreblack ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
Apr 20 23:26:37 coreblack ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 20 23:26:38 coreblack ata1.00: configured for UDMA/100
Apr 20 23:26:38 coreblack SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
Apr 20 23:26:38 coreblack sda: Write Protect is off
Apr 20 23:26:38 coreblack SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 20 23:26:38 coreblack logger: ACPI group/action undefined: thermal_zone / TZ1
Apr 20 23:26:38 coreblack logger: ACPI group/action undefined: thermal_zone / TZ2
Apr 20 23:26:38 coreblack logger: ACPI group/action undefined: thermal_zone / TZ0
Apr 20 23:26:38 coreblack ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f4101000-f41017ff] Max Packet=[2048] IR/IT contexts=[4/8]
Apr 20 23:26:38 coreblack eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Apr 20 23:26:38 coreblack USB Universal Host Controller Interface driver v3.0
Apr 20 23:26:38 coreblack ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
Apr 20 23:26:38 coreblack uhci_hcd 0000:00:1d.0: UHCI Host Controller
Apr 20 23:26:38 coreblack uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Apr 20 23:26:38 coreblack uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004020
Apr 20 23:26:38 coreblack usb usb1: configuration #1 chosen from 1 choice
Apr 20 23:26:38 coreblack hub 1-0:1.0: USB hub found
Apr 20 23:26:38 coreblack hub 1-0:1.0: 2 ports detected
Apr 20 23:26:38 coreblack ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 17 (level, low) -> IRQ 17
Apr 20 23:26:38 coreblack uhci_hcd 0000:00:1d.1: UHCI Host Controller
Apr 20 23:26:38 coreblack uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Apr 20 23:26:38 coreblack uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004040
Apr 20 23:26:38 coreblack usb usb2: configuration #1 chosen from 1 choice
Apr 20 23:26:38 coreblack hub 2-0:1.0: USB hub found
Apr 20 23:26:38 coreblack hub 2-0:1.0: 2 ports detected
Apr 20 23:26:38 coreblack ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
Apr 20 23:26:38 coreblack uhci_hcd 0000:00:1d.2: UHCI Host Controller
Apr 20 23:26:38 coreblack uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Apr 20 23:26:38 coreblack uhci_hcd 0000:00:1d.2: irq 19, io base 0x00004060
Apr 20 23:26:38 coreblack usb usb3: configuration #1 chosen from 1 choice
Apr 20 23:26:38 coreblack hub 3-0:1.0: USB hub found
Apr 20 23:26:38 coreblack hub 3-0:1.0: 2 ports detected
Apr 20 23:26:39 coreblack ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 18
Apr 20 23:26:39 coreblack uhci_hcd 0000:00:1d.3: UHCI Host Controller
Apr 20 23:26:39 coreblack uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Apr 20 23:26:39 coreblack uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004080
Apr 20 23:26:39 coreblack usb usb4: configuration #1 chosen from 1 choice
Apr 20 23:26:39 coreblack hub 4-0:1.0: USB hub found
Apr 20 23:26:39 coreblack hub 4-0:1.0: 2 ports detected
Apr 20 23:26:39 coreblack usb 2-2: new low speed USB device using uhci_hcd and address 2
Apr 20 23:26:39 coreblack Initializing USB Mass Storage driver...
Apr 20 23:26:39 coreblack usb 2-2: configuration #1 chosen from 1 choice
Apr 20 23:26:39 coreblack input: Logitech USB-PS/2 Optical Mouse as /class/input/input8
Apr 20 23:26:39 coreblack input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2
Apr 20 23:26:39 coreblack usbcore: registered new interface driver usb-storage
Apr 20 23:26:39 coreblack USB Mass Storage support registered.
Apr 20 23:26:39 coreblack ADDRCONF(NETDEV_UP): eth2: link is not ready
Apr 20 23:26:40 coreblack ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
I've copied the part relative to the suspend/resume routine.
Offline
Seeing that Prism54 was the module that was indicated, edit rc.conf and blacklist prism54. I'm guessing you're not actually using it anyways.
Shoot me --> . <--
Offline
Pages: 1