You are not logged in.

#5801 2013-10-21 21:10:50

clfarron4
Member
From: London, UK
Registered: 2013-06-28
Posts: 2,162
Website

Re: The AMD/ATI Bar & Grill

@Vi0L0: You may want to look at this thread, as someone is having a problem with catalyst-test.


Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Offline

#5802 2013-10-21 21:11:40

clfarron4
Member
From: London, UK
Registered: 2013-06-28
Posts: 2,162
Website

Re: The AMD/ATI Bar & Grill

I've just linked it in the AMD/ATi Bar/Grill thread. I'm also going to report it so that it can be merged with said thread.


Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Offline

#5803 2013-10-21 21:15:37

jasonwryan
Forum & Wiki Admin
From: .nz
Registered: 2009-05-09
Posts: 19,370
Website

Re: The AMD/ATI Bar & Grill

Merging...


Arch + dwm   •   Mercurial repos  •   Github

Registered Linux User #482438

Offline

#5804 2013-10-22 13:05:42

AuHop
Member
Registered: 2013-05-12
Posts: 7

Re: The AMD/ATI Bar & Grill

Kuci wrote:

Screen brightness is still broken with Catalyst 13.11 on my ASUS U38DT.

It's broken on the 7970m in my M17x R4 as well.

Offline

#5805 2013-10-23 21:06:19

mojtabazn
Member
Registered: 2013-10-20
Posts: 22

Re: The AMD/ATI Bar & Grill

hey because of xorg 1.14 i removed open source driver and tried installing 13.11 beta  in unofficial  repo but get black screen and this log is there some way get it working ?

asus n61jq ati mobility radeon 5730 sad


[    16.967] 
X.Org X Server 1.14.3
Release Date: 2013-09-12
[    16.967] X Protocol Version 11, Revision 0
[    16.967] Build Operating System: Linux 3.11.1-1-ARCH x86_64 
[    16.967] Current Operating System: Linux localhost 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
[    16.967] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=1a596825-4426-4e54-ba76-3cd4638f7a91 rw nomodeset
[    16.967] Build Date: 08 October 2013  08:48:10PM
[    16.967]  
[    16.967] Current version of pixman: 0.30.2
[    16.967] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    16.967] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    16.967] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 23 23:50:01 2013
[    17.019] (==) Using config file: "/etc/X11/xorg.conf"
[    17.019] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    17.087] (==) ServerLayout "aticonfig Layout"
[    17.087] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    17.087] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    17.087] (**) |   |-->Device "aticonfig-Device[0]-0"
[    17.087] (==) Automatically adding devices
[    17.087] (==) Automatically enabling devices
[    17.087] (==) Automatically adding GPU devices
[    17.150] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    17.150] 	Entry deleted from font path.
[    17.150] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    17.150] 	Entry deleted from font path.
[    17.169] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    17.169] 	Entry deleted from font path.
[    17.169] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    17.170] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    17.170] 	Entry deleted from font path.
[    17.170] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    17.170] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/
[    17.170] (==) ModulePath set to "/usr/lib/xorg/modules"
[    17.170] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    17.170] (II) Loader magic: 0x7fdc20
[    17.170] (II) Module ABI versions:
[    17.170] 	X.Org ANSI C Emulation: 0.4
[    17.170] 	X.Org Video Driver: 14.1
[    17.170] 	X.Org XInput driver : 19.1
[    17.170] 	X.Org Server Extension : 7.0
[    17.172] (--) PCI:*(0:1:0:0) 1002:68c0:1043:1c22 rev 0, Mem @ 0xc0000000/268435456, 0xd0020000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[    17.219] Initializing built-in extension Generic Event Extension
[    17.219] Initializing built-in extension SHAPE
[    17.219] Initializing built-in extension MIT-SHM
[    17.219] Initializing built-in extension XInputExtension
[    17.219] Initializing built-in extension XTEST
[    17.219] Initializing built-in extension BIG-REQUESTS
[    17.219] Initializing built-in extension SYNC
[    17.219] Initializing built-in extension XKEYBOARD
[    17.219] Initializing built-in extension XC-MISC
[    17.219] Initializing built-in extension SECURITY
[    17.219] Initializing built-in extension XINERAMA
[    17.219] Initializing built-in extension XFIXES
[    17.219] Initializing built-in extension RENDER
[    17.219] Initializing built-in extension RANDR
[    17.219] Initializing built-in extension COMPOSITE
[    17.219] Initializing built-in extension DAMAGE
[    17.219] Initializing built-in extension MIT-SCREEN-SAVER
[    17.219] Initializing built-in extension DOUBLE-BUFFER
[    17.219] Initializing built-in extension RECORD
[    17.219] Initializing built-in extension DPMS
[    17.219] Initializing built-in extension X-Resource
[    17.219] Initializing built-in extension XVideo
[    17.219] Initializing built-in extension XVideo-MotionCompensation
[    17.220] Initializing built-in extension XFree86-VidModeExtension
[    17.220] Initializing built-in extension XFree86-DGA
[    17.220] Initializing built-in extension XFree86-DRI
[    17.220] Initializing built-in extension DRI2
[    17.220] (II) "glx" will be loaded by default.
[    17.220] (II) LoadModule: "glx"
[    17.251] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    17.289] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    17.289] 	compiled for 6.9.0, module version = 1.0.0
[    17.289] Loading extension GLX
[    17.289] (II) LoadModule: "fglrx"
[    17.290] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    17.990] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    17.990] 	compiled for 1.4.99.906, module version = 13.20.6
[    17.990] 	Module class: X.Org Video Driver
[    18.003] (II) Loading sub module "fglrxdrm"
[    18.003] (II) LoadModule: "fglrxdrm"
[    18.003] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    18.033] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    18.033] 	compiled for 1.4.99.906, module version = 13.20.6
[    18.033] (II) AMD Proprietary Linux Driver Version Identifier:13.20.6
[    18.033] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.20.16                 
[    18.033] (II) AMD Proprietary Linux Driver Build Date: Sep 26 2013 16:09:41
[    18.033] (++) using VT number 7

[    18.147] (WW) Falling back to old probe method for fglrx
[    18.239] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    18.304] ukiDynamicMajor: failed to open /proc/ati/major
[    18.304] ukiDynamicMajor: failed to open /proc/ati/major
[    18.313] (--) Chipset Supported AMD Graphics Processor (0x68C0) found
[    18.325] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    18.326] (II) fglrx(0): pEnt->device->identifier=0xcac3e0
[    18.326] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[    18.326] (II) Loading sub module "vgahw"
[    18.326] (II) LoadModule: "vgahw"
[    18.326] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    18.339] (II) Module vgahw: vendor="X.Org Foundation"
[    18.339] 	compiled for 1.14.3, module version = 0.1.0
[    18.340] 	ABI class: X.Org Video Driver, version 14.1
[    18.340] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    18.340] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    18.340] (==) fglrx(0): Default visual is TrueColor
[    18.340] (**) fglrx(0): Option "DPMS" "true"
[    18.340] (==) fglrx(0): RGB weight 888
[    18.340] (II) fglrx(0): Using 8 bits per RGB 
[    18.340] (==) fglrx(0): Buffer Tiling is ON
[    18.341] (II) Loading sub module "fglrxdrm"
[    18.341] (II) LoadModule: "fglrxdrm"
[    18.341] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    18.341] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    18.341] 	compiled for 1.4.99.906, module version = 13.20.6
[    18.404] ukiDynamicMajor: failed to open /proc/ati/major
[    18.404] ukiDynamicMajor: failed to open /proc/ati/major
[    18.404] (**) fglrx(0): NoAccel = NO
[    18.404] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[    18.404] (--) fglrx(0): Chipset: "AMD Radeon HD 6570M/5700 Series" (Chipset = 0x68c0)
[    18.404] (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x1c22)
[    18.405] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[    18.405] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[    18.405] (--) fglrx(0): MMIO registers at 0xd0020000
[    18.405] (--) fglrx(0): I/O port at 0x0000d000
[    18.405] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    18.434] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    18.440] (II) Loading sub module "vbe"
[    18.440] (II) LoadModule: "vbe"
[    18.448] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    18.449] (II) Module vbe: vendor="X.Org Foundation"
[    18.449] 	compiled for 1.14.3, module version = 1.1.0
[    18.449] 	ABI class: X.Org Video Driver, version 14.1
[    18.466] (II) fglrx(0): VESA BIOS detected
[    18.466] (II) fglrx(0): VESA VBE Version 3.0
[    18.466] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    18.466] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    18.466] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[    18.466] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    18.466] (II) fglrx(0): VESA VBE OEM Product: MADISON
[    18.466] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    18.506] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[    18.506] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[    18.506] (II) fglrx(0): PCIE card detected
[    18.506] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    18.506] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    18.506] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[    18.506] (II) fglrx(0): RandR 1.2 support is enabled!
[    18.506] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    18.506] (==) fglrx(0): Center Mode is disabled 
[    18.506] (II) Loading sub module "fb"
[    18.506] (II) LoadModule: "fb"
[    18.506] (II) Loading /usr/lib/xorg/modules/libfb.so
[    18.508] (II) Module fb: vendor="X.Org Foundation"
[    18.508] 	compiled for 1.14.3, module version = 1.0.0
[    18.508] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    18.508] (II) Loading sub module "ddc"
[    18.508] (II) LoadModule: "ddc"
[    18.508] (II) Module "ddc" already built-in
[    18.697] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[    18.697] (II) fglrx(0): Output DFP1 has no monitor section
[    18.697] (II) fglrx(0): Output CRT1 has no monitor section
[    18.697] (II) Loading sub module "ddc"
[    18.697] (II) LoadModule: "ddc"
[    18.697] (II) Module "ddc" already built-in
[    18.698] (II) fglrx(0): Connected Display0: LVDS
[    18.698] (II) fglrx(0): Display0 EDID data ---------------------------
[    18.698] (II) fglrx(0): Manufacturer: SEC  Model: 524d  Serial#: 0
[    18.698] (II) fglrx(0): Year: 2009  Week: 0
[    18.698] (II) fglrx(0): EDID Version: 1.3
[    18.698] (II) fglrx(0): Digital Display Input
[    18.698] (II) fglrx(0): Max Image Size [cm]: horiz.: 35  vert.: 20
[    18.698] (II) fglrx(0): Gamma: 2.20
[    18.698] (II) fglrx(0): No DPMS capabilities specified
[    18.698] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    18.698] (II) fglrx(0): First detailed timing is preferred mode
[    18.698] (II) fglrx(0): redX: 0.620 redY: 0.340   greenX: 0.340 greenY: 0.590
[    18.698] (II) fglrx(0): blueX: 0.150 blueY: 0.080   whiteX: 0.313 whiteY: 0.329
[    18.698] (II) fglrx(0): Manufacturer's mask: 0
[    18.698] (II) fglrx(0): Supported detailed timing:
[    18.698] (II) fglrx(0): clock: 72.3 MHz   Image Size:  353 x 198 mm
[    18.698] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    18.698] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    18.698] (II) fglrx(0): Unknown vendor-specific block f
[    18.698] (II) fglrx(0):  SAMSUNG
[    18.698] (II) fglrx(0):  160AT06-A01
[    18.698] (II) fglrx(0): EDID (in hex):
[    18.698] (II) fglrx(0): 	00ffffffffffff004ca34d5200000000
[    18.698] (II) fglrx(0): 	00130103802314780ac0a59e57579726
[    18.698] (II) fglrx(0): 	14505400000001010101010101010101
[    18.698] (II) fglrx(0): 	010101010101411c56a0500016303020
[    18.698] (II) fglrx(0): 	250061c6100000190000000f00000000
[    18.698] (II) fglrx(0): 	00000000001eb4027400000000fe0053
[    18.698] (II) fglrx(0): 	414d53554e470a2020202020000000fe
[    18.698] (II) fglrx(0): 	00313630415430362d4130310a20009e
[    18.698] (II) fglrx(0): End of Display0 EDID data --------------------
[    18.698] (WW) fglrx(0): Dynamic Surface Resizing cannot be enabled
[    18.699] (II) fglrx(0): EDID for output LVDS
[    18.699] (II) fglrx(0): Manufacturer: SEC  Model: 524d  Serial#: 0
[    18.699] (II) fglrx(0): Year: 2009  Week: 0
[    18.699] (II) fglrx(0): EDID Version: 1.3
[    18.699] (II) fglrx(0): Digital Display Input
[    18.699] (II) fglrx(0): Max Image Size [cm]: horiz.: 35  vert.: 20
[    18.699] (II) fglrx(0): Gamma: 2.20
[    18.699] (II) fglrx(0): No DPMS capabilities specified
[    18.699] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    18.699] (II) fglrx(0): First detailed timing is preferred mode
[    18.699] (II) fglrx(0): redX: 0.620 redY: 0.340   greenX: 0.340 greenY: 0.590
[    18.699] (II) fglrx(0): blueX: 0.150 blueY: 0.080   whiteX: 0.313 whiteY: 0.329
[    18.700] (II) fglrx(0): Manufacturer's mask: 0
[    18.700] (II) fglrx(0): Supported detailed timing:
[    18.700] (II) fglrx(0): clock: 72.3 MHz   Image Size:  353 x 198 mm
[    18.700] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    18.700] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    18.700] (II) fglrx(0): Unknown vendor-specific block f
[    18.700] (II) fglrx(0):  SAMSUNG
[    18.700] (II) fglrx(0):  160AT06-A01
[    18.700] (II) fglrx(0): EDID (in hex):
[    18.700] (II) fglrx(0): 	00ffffffffffff004ca34d5200000000
[    18.700] (II) fglrx(0): 	00130103802314780ac0a59e57579726
[    18.700] (II) fglrx(0): 	14505400000001010101010101010101
[    18.700] (II) fglrx(0): 	010101010101411c56a0500016303020
[    18.700] (II) fglrx(0): 	250061c6100000190000000f00000000
[    18.700] (II) fglrx(0): 	00000000001eb4027400000000fe0053
[    18.700] (II) fglrx(0): 	414d53554e470a2020202020000000fe
[    18.700] (II) fglrx(0): 	00313630415430362d4130310a20009e
[    18.700] (II) fglrx(0): EDID vendor "SEC", prod id 21069
[    18.700] (II) fglrx(0): Printing DDC gathered Modelines:
[    18.700] (II) fglrx(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    18.700] (II) fglrx(0): Printing probed modes for output LVDS
[    18.700] (II) fglrx(0): Modeline "1366x768"x60.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    18.700] (II) fglrx(0): Modeline "1360x768"x60.0   72.33  1360 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz e)
[    18.700] (II) fglrx(0): Modeline "1280x768"x60.0   72.33  1280 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz e)
[    18.700] (II) fglrx(0): Modeline "1280x720"x60.0   72.33  1280 1414 1446 1526  720 770 775 790 -hsync -vsync (47.4 kHz e)
[    18.700] (II) fglrx(0): Modeline "1024x768"x60.0   72.33  1024 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz e)
[    18.700] (II) fglrx(0): Modeline "1024x600"x60.0   72.33  1024 1414 1446 1526  600 770 775 790 -hsync -vsync (47.4 kHz e)
[    18.700] (II) fglrx(0): Modeline "800x600"x60.0   72.33  800 1414 1446 1526  600 770 775 790 -hsync -vsync (47.4 kHz e)
[    18.700] (II) fglrx(0): Modeline "800x480"x60.0   72.33  800 1414 1446 1526  480 770 775 790 -hsync -vsync (47.4 kHz e)
[    18.700] (II) fglrx(0): Modeline "640x480"x60.0   72.33  640 1414 1446 1526  480 770 775 790 -hsync -vsync (47.4 kHz e)
[    18.700] (II) fglrx(0): EDID for output DFP1
[    18.700] (II) fglrx(0): EDID for output CRT1
[    18.700] (II) fglrx(0): Output LVDS connected
[    18.700] (II) fglrx(0): Output DFP1 disconnected
[    18.700] (II) fglrx(0): Output CRT1 disconnected
[    18.700] (II) fglrx(0): Using exact sizes for initial modes
[    18.700] (II) fglrx(0): Output LVDS using initial mode 1366x768
[    18.700] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    18.701] (II) fglrx(0): Display dimensions: (350, 200) mm
[    18.701] (II) fglrx(0): DPI set to (99, 97)
[    18.701] (II) fglrx(0): Eyefinity capable adapter detected.
[    18.701] (II) fglrx(0): Adapter AMD Radeon HD 6570M/5700 Series has 6 configurable heads and 1 displays connected.
[    18.701] (==) fglrx(0):  PseudoColor visuals disabled
[    18.701] (II) Loading sub module "ramdac"
[    18.701] (II) LoadModule: "ramdac"
[    18.701] (II) Module "ramdac" already built-in
[    18.701] (==) fglrx(0): NoDRI = NO
[    18.701] (==) fglrx(0): Capabilities: 0x00000000
[    18.701] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    18.701] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    18.701] (==) fglrx(0): UseFastTLS=0
[    18.701] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[    18.701] (--) Depth 24 pixmap format is 32 bpp
[    18.701] (EE) fglrx(0): atiddxDriScreenInit failed. Probably kernel module missing or incompatible. 
[    18.701] (WW) fglrx(0): ***********************************************************
[    18.701] (WW) fglrx(0): * DRI initialization failed                               *
[    18.701] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[    18.701] (WW) fglrx(0): * 2D and 3D acceleration disabled                         *
[    18.701] (WW) fglrx(0): ***********************************************************
[    18.712] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x10000000
[    18.724] (II) fglrx(0): FBMM initialized for area (0,0)-(1600,8191)
[    18.724] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1600,1600) (front color buffer - assumption)
[    18.724] (II) fglrx(0): Largest offscreen area available: 1600 x 6591
[    18.727] (==) fglrx(0): Backing store disabled
[    18.727] Loading extension FGLRXEXTENSION
[    18.727] (**) fglrx(0): DPMS enabled
[    18.727] (II) fglrx(0): Initialized in-driver Xinerama extension
[    18.727] (WW) fglrx(0): Textured Video not supported without DRI enabled.
[    18.727] (II) LoadModule: "glesx"
[    18.739] (II) Loading /usr/lib/xorg/modules/glesx.so
[    18.897] (II) Module glesx: vendor="X.Org Foundation"
[    18.897] 	compiled for 1.4.99.906, module version = 1.0.0
[    18.897] Loading extension GLESX
[    18.897] (II) fglrx(0): GLESX enableFlags = 576
[    18.898] (II) fglrx(0): Enable composite support successfully
[    18.898] (WW) fglrx(0): Option "VendorName" is not used
[    18.898] (WW) fglrx(0): Option "ModelName" is not used
[    18.898] (==) fglrx(0): Silken mouse enabled
[    18.898] (==) fglrx(0): Using HW cursor of display infrastructure!
[    18.899] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    18.914] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[    18.914] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[    19.944] (--) RandR disabled
[    19.949] (II) AIGLX: Screen 0 is not DRI capable
[    19.950] [glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
[    19.950] (II) fglrx(0): Setting screen physical size to 361 x 203
[    20.425] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    20.425] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.425] (II) LoadModule: "evdev"
[    20.426] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.451] (II) Module evdev: vendor="X.Org Foundation"
[    20.451] 	compiled for 1.14.3, module version = 2.8.2
[    20.451] 	Module class: X.Org XInput Driver
[    20.451] 	ABI class: X.Org XInput driver, version 19.1
[    20.451] (II) Using input driver 'evdev' for 'Power Button'
[    20.451] (**) Power Button: always reports core events
[    20.451] (**) evdev: Power Button: Device: "/dev/input/event4"
[    20.451] (--) evdev: Power Button: Vendor 0 Product 0x1
[    20.451] (--) evdev: Power Button: Found keys
[    20.451] (II) evdev: Power Button: Configuring as keyboard
[    20.451] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    20.451] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    20.452] (**) Option "xkb_rules" "evdev"
[    20.452] (**) Option "xkb_model" "pc104"
[    20.452] (**) Option "xkb_layout" "us"
[    20.477] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    20.477] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    20.477] (II) Using input driver 'evdev' for 'Video Bus'
[    20.477] (**) Video Bus: always reports core events
[    20.477] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    20.477] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    20.477] (--) evdev: Video Bus: Found keys
[    20.477] (II) evdev: Video Bus: Configuring as keyboard
[    20.477] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input5/event5"
[    20.478] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    20.478] (**) Option "xkb_rules" "evdev"
[    20.478] (**) Option "xkb_model" "pc104"
[    20.478] (**) Option "xkb_layout" "us"
[    20.478] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    20.478] (II) No input driver specified, ignoring this device.
[    20.478] (II) This device may have been added with another device file.
[    20.479] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    20.479] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    20.479] (II) Using input driver 'evdev' for 'Sleep Button'
[    20.479] (**) Sleep Button: always reports core events
[    20.479] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[    20.479] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    20.479] (--) evdev: Sleep Button: Found keys
[    20.479] (II) evdev: Sleep Button: Configuring as keyboard
[    20.479] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[    20.479] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    20.479] (**) Option "xkb_rules" "evdev"
[    20.479] (**) Option "xkb_model" "pc104"
[    20.479] (**) Option "xkb_layout" "us"
[    20.480] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event10)
[    20.480] (II) No input driver specified, ignoring this device.
[    20.480] (II) This device may have been added with another device file.
[    20.481] (II) config/udev: Adding input device USB2.0 UVC 2M WebCam (/dev/input/event11)
[    20.481] (**) USB2.0 UVC 2M WebCam: Applying InputClass "evdev keyboard catchall"
[    20.481] (II) Using input driver 'evdev' for 'USB2.0 UVC 2M WebCam'
[    20.481] (**) USB2.0 UVC 2M WebCam: always reports core events
[    20.481] (**) evdev: USB2.0 UVC 2M WebCam: Device: "/dev/input/event11"
[    20.481] (--) evdev: USB2.0 UVC 2M WebCam: Vendor 0x13d3 Product 0x5122
[    20.481] (--) evdev: USB2.0 UVC 2M WebCam: Found keys
[    20.481] (II) evdev: USB2.0 UVC 2M WebCam: Configuring as keyboard
[    20.481] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input11/event11"
[    20.481] (II) XINPUT: Adding extended input device "USB2.0 UVC 2M WebCam" (type: KEYBOARD, id 9)
[    20.481] (**) Option "xkb_rules" "evdev"
[    20.481] (**) Option "xkb_model" "pc104"
[    20.481] (**) Option "xkb_layout" "us"
[    20.482] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event8)
[    20.482] (II) No input driver specified, ignoring this device.
[    20.482] (II) This device may have been added with another device file.
[    20.482] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event9)
[    20.482] (II) No input driver specified, ignoring this device.
[    20.482] (II) This device may have been added with another device file.
[    20.483] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event1)
[    20.483] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    20.483] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[    20.483] (**) USB Optical Mouse: always reports core events
[    20.483] (**) evdev: USB Optical Mouse: Device: "/dev/input/event1"
[    20.483] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x7
[    20.483] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[    20.483] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[    20.483] (--) evdev: USB Optical Mouse: Found relative axes
[    20.483] (--) evdev: USB Optical Mouse: Found x and y relative axes
[    20.483] (--) evdev: USB Optical Mouse: Found absolute axes
[    20.483] (II) evdev: USB Optical Mouse: Forcing absolute x/y axes to exist.
[    20.483] (II) evdev: USB Optical Mouse: Configuring as mouse
[    20.483] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[    20.483] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    20.483] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    20.483] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/input/input1/event1"
[    20.483] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10)
[    20.483] (II) evdev: USB Optical Mouse: initialized for relative axes.
[    20.483] (WW) evdev: USB Optical Mouse: ignoring absolute axes.
[    20.483] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[    20.483] (**) USB Optical Mouse: (accel) acceleration profile 0
[    20.483] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[    20.483] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[    20.484] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[    20.484] (II) No input driver specified, ignoring this device.
[    20.484] (II) This device may have been added with another device file.
[    20.484] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event7)
[    20.484] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[    20.484] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[    20.484] (**) Asus Laptop extra buttons: always reports core events
[    20.484] (**) evdev: Asus Laptop extra buttons: Device: "/dev/input/event7"
[    20.484] (--) evdev: Asus Laptop extra buttons: Vendor 0 Product 0
[    20.484] (--) evdev: Asus Laptop extra buttons: Found keys
[    20.484] (II) evdev: Asus Laptop extra buttons: Configuring as keyboard
[    20.484] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input7/event7"
[    20.484] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 11)
[    20.484] (**) Option "xkb_rules" "evdev"
[    20.484] (**) Option "xkb_model" "pc104"
[    20.484] (**) Option "xkb_layout" "us"
[    20.484] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    20.484] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    20.484] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    20.484] (**) AT Translated Set 2 keyboard: always reports core events
[    20.484] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    20.484] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    20.484] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    20.484] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    20.484] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    20.484] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    20.484] (**) Option "xkb_rules" "evdev"
[    20.484] (**) Option "xkb_model" "pc104"
[    20.484] (**) Option "xkb_layout" "us"
[    20.485] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event12)
[    20.485] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    20.485] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    20.485] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    20.485] (II) LoadModule: "synaptics"
[    20.485] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    20.495] (II) Module synaptics: vendor="X.Org Foundation"
[    20.495] 	compiled for 1.14.1, module version = 1.7.1
[    20.495] 	Module class: X.Org XInput Driver
[    20.495] 	ABI class: X.Org XInput driver, version 19.1
[    20.495] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    20.495] (**) ETPS/2 Elantech Touchpad: always reports core events
[    20.495] (**) Option "Device" "/dev/input/event12"
[    20.607] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[    20.607] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1152 (res 0)
[    20.607] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 576 (res 0)
[    20.607] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    20.607] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    20.607] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[    20.607] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    20.607] (**) Option "TapButton1" "1"
[    20.607] (**) Option "TapButton2" "2"
[    20.607] (**) Option "TapButton3" "3"
[    20.607] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    20.607] (**) ETPS/2 Elantech Touchpad: always reports core events
[    20.660] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input12/event12"
[    20.660] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[    20.660] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    20.660] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[    20.660] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.155
[    20.660] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    20.661] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    20.661] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    20.661] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    20.661] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    20.661] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    20.661] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    20.662] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    20.662] (II) No input driver specified, ignoring this device.
[    20.662] (II) This device may have been added with another device file.
[    20.670] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    52.015] (EE) fglrx(0): firegl_SetSuspendResumeState FAILED -9.
[   110.986] (II) UnloadModule: "synaptics"
[   110.986] (II) evdev: AT Translated Set 2 keyboard: Close
[   110.986] (II) UnloadModule: "evdev"
[   110.986] (II) evdev: Asus Laptop extra buttons: Close
[   110.986] (II) UnloadModule: "evdev"
[   110.986] (II) evdev: USB Optical Mouse: Close
[   110.986] (II) UnloadModule: "evdev"
[   110.986] (II) evdev: USB2.0 UVC 2M WebCam: Close
[   110.986] (II) UnloadModule: "evdev"
[   110.986] (II) evdev: Sleep Button: Close
[   110.986] (II) UnloadModule: "evdev"
[   110.986] (II) evdev: Video Bus: Close
[   110.986] (II) UnloadModule: "evdev"
[   110.986] (II) evdev: Power Button: Close
[   110.986] (II) UnloadModule: "evdev"
[   110.989] (EE) 
[   110.989] (EE) Backtrace:
[   111.196] (EE) 0: /usr/bin/X (xorg_backtrace+0x3d) [0x57f67d]
[   111.196] (EE) 1: /usr/bin/X (0x400000+0x1833e9) [0x5833e9]
[   111.196] (EE) 2: /usr/lib/libpthread.so.0 (0x7fd4e9827000+0xf870) [0x7fd4e9836870]
[   111.196] (EE) 3: /usr/lib/libpciaccess.so.0 (0x7fd4e9a45000+0x503e) [0x7fd4e9a4a03e]
[   111.196] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_x_inb+0x46) [0x7fd4e6e3e5a6]
[   111.197] (EE) 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7fd4e652e000+0x909285) [0x7fd4e6e37285]
[   111.197] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (X86EMU_exec+0xa5) [0x7fd4e6e2a9d5]
[   111.197] (EE) 7: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_xf86ExecX86int10+0x46) [0x7fd4e6e3f706]
[   111.198] (EE) 8: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xf86ExecX86int10+0xd) [0x7fd4e68eb21d]
[   111.198] (EE) 9: /usr/lib/xorg/modules/libvbe.so (VBESetVBEMode+0x9d) [0x7fd4e5ed365d]
[   111.198] (EE) 10: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7fd4e652e000+0x3f0923) [0x7fd4e691e923]
[   111.198] (EE) 11: /usr/lib/xorg/modules/drivers/fglrx_drv.so (atiddxVBESetConsoleMode+0x44) [0x7fd4e691e774]
[   111.199] (EE) 12: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxFreeScreen+0x730) [0x7fd4e6a7db40]
[   111.199] (EE) 13: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxCloseScreen+0x321) [0x7fd4e6a7d171]
[   111.199] (EE) 14: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7fd4e652e000+0x970cc6) [0x7fd4e6e9ecc6]
[   111.199] (EE) 15: /usr/bin/X (0x400000+0xc4efe) [0x4c4efe]
[   111.200] (EE) 16: /usr/bin/X (0x400000+0x107de6) [0x507de6]
[   111.200] (EE) 17: /usr/bin/X (0x400000+0x26a47) [0x426a47]
[   111.200] (EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7fd4e88aabc5]
[   111.200] (EE) 19: /usr/bin/X (0x400000+0x26c81) [0x426c81]
[   111.200] (EE) 
[   111.200] (EE) Segmentation fault at address 0x0
[   111.200] (EE) 
Fatal server error:
[   111.200] (EE) Caught signal 11 (Segmentation fault). Server aborting
[   111.200] (EE) 
[   111.200] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   111.200] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   111.200] (EE) 
[   111.200] (EE) Server terminated with error (1). Closing log file.

Last edited by mojtabazn (2013-10-23 21:20:36)

Offline

#5806 2013-10-24 03:00:14

ivdok
Member
From: Nizhniy Novgorod (ru)
Registered: 2013-07-17
Posts: 56
Website

Re: The AMD/ATI Bar & Grill

Please, refer to AMD Catalyst page on ArchWiki. You forgot to disable KMS. You forgot to blacklist FOSS driver's kernel module. You forgot a fistful of things.


I use Arch Linux since 14/07/2013. Not that long, I agree, but I don't think what I will change it in near time - extensive wiki, obvious package manager and big, built-up community makes its job. I use Xfce4 as DE, Xfwm4 + Compton as WM, and for DM... "exec startxfce4" and "compton -b" inside .bash_profile big_smile
[ASUS P5QSE2, Pentium dual-core E5300, HD5770, 2GB RAM, 120G ext4 sda, 320G ntfs sdb]

Offline

#5807 2013-10-24 03:57:08

mojtabazn
Member
Registered: 2013-10-20
Posts: 22

Re: The AMD/ATI Bar & Grill

there is no file under /etc/modprobe.d/

and there is one file under this dir /etc/modules-load.d/  catalyst.conf   and one line  just fglrx

and here is line of grub  as you see i did all

menuentry 'Arch Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-1a596825-4426-4e54-ba76-3cd4638f7a91' {
	load_video
	set gfxpayload=keep
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos6'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  1a596825-4426-4e54-ba76-3cd4638f7a91
	else
	  search --no-floppy --fs-uuid --set=root 1a596825-4426-4e54-ba76-3cd4638f7a91
	fi
	echo	'Loading Linux core repo kernel ...'
	linux	/boot/vmlinuz-linux root=UUID=1a596825-4426-4e54-ba76-3cd4638f7a91 rw
  nomodeset
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initramfs-linux.img
}

i forgot to install lib32-catalyst-utils smile now installed and reconfigured xorx  it works  but screen brightness i too  low  and FN+brightness  do nothing:(


here the new log file  still 3 EE but i think one of them is important

[    14.993] 
X.Org X Server 1.14.3
Release Date: 2013-09-12
[    14.993] X Protocol Version 11, Revision 0
[    14.993] Build Operating System: Linux 3.11.1-1-ARCH x86_64 
[    14.993] Current Operating System: Linux localhost 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
[    14.993] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=1a596825-4426-4e54-ba76-3cd4638f7a91 rw nomodeset
[    14.993] Build Date: 08 October 2013  08:48:10PM
[    14.994]  
[    14.994] Current version of pixman: 0.30.2
[    14.994] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    14.994] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    14.994] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 24 07:57:52 2013
[    15.046] (==) Using config file: "/etc/X11/xorg.conf"
[    15.046] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    15.121] (==) ServerLayout "aticonfig Layout"
[    15.121] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    15.121] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    15.121] (**) |   |-->Device "aticonfig-Device[0]-0"
[    15.121] (==) Automatically adding devices
[    15.121] (==) Automatically enabling devices
[    15.121] (==) Automatically adding GPU devices
[    15.148] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    15.148] 	Entry deleted from font path.
[    15.148] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    15.148] 	Entry deleted from font path.
[    15.162] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    15.162] 	Entry deleted from font path.
[    15.162] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    15.164] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    15.164] 	Entry deleted from font path.
[    15.164] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    15.164] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/
[    15.164] (==) ModulePath set to "/usr/lib/xorg/modules"
[    15.164] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    15.164] (II) Loader magic: 0x7fdc20
[    15.164] (II) Module ABI versions:
[    15.164] 	X.Org ANSI C Emulation: 0.4
[    15.164] 	X.Org Video Driver: 14.1
[    15.164] 	X.Org XInput driver : 19.1
[    15.164] 	X.Org Server Extension : 7.0
[    15.167] (--) PCI:*(0:1:0:0) 1002:68c0:1043:1c22 rev 0, Mem @ 0xc0000000/268435456, 0xd0020000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[    15.201] Initializing built-in extension Generic Event Extension
[    15.201] Initializing built-in extension SHAPE
[    15.201] Initializing built-in extension MIT-SHM
[    15.201] Initializing built-in extension XInputExtension
[    15.201] Initializing built-in extension XTEST
[    15.201] Initializing built-in extension BIG-REQUESTS
[    15.201] Initializing built-in extension SYNC
[    15.201] Initializing built-in extension XKEYBOARD
[    15.201] Initializing built-in extension XC-MISC
[    15.201] Initializing built-in extension SECURITY
[    15.201] Initializing built-in extension XINERAMA
[    15.201] Initializing built-in extension XFIXES
[    15.201] Initializing built-in extension RENDER
[    15.201] Initializing built-in extension RANDR
[    15.201] Initializing built-in extension COMPOSITE
[    15.202] Initializing built-in extension DAMAGE
[    15.202] Initializing built-in extension MIT-SCREEN-SAVER
[    15.202] Initializing built-in extension DOUBLE-BUFFER
[    15.202] Initializing built-in extension RECORD
[    15.202] Initializing built-in extension DPMS
[    15.202] Initializing built-in extension X-Resource
[    15.202] Initializing built-in extension XVideo
[    15.202] Initializing built-in extension XVideo-MotionCompensation
[    15.202] Initializing built-in extension XFree86-VidModeExtension
[    15.202] Initializing built-in extension XFree86-DGA
[    15.202] Initializing built-in extension XFree86-DRI
[    15.202] Initializing built-in extension DRI2
[    15.202] (II) "glx" will be loaded by default.
[    15.202] (II) LoadModule: "glx"
[    15.222] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    15.453] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    15.453] 	compiled for 6.9.0, module version = 1.0.0
[    15.453] Loading extension GLX
[    15.453] (II) LoadModule: "fglrx"
[    15.476] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    16.428] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    16.428] 	compiled for 1.4.99.906, module version = 13.20.6
[    16.428] 	Module class: X.Org Video Driver
[    16.451] (II) Loading sub module "fglrxdrm"
[    16.451] (II) LoadModule: "fglrxdrm"
[    16.451] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    16.526] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    16.526] 	compiled for 1.4.99.906, module version = 13.20.6
[    16.526] (II) AMD Proprietary Linux Driver Version Identifier:13.20.6
[    16.526] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.20.16                 
[    16.526] (II) AMD Proprietary Linux Driver Build Date: Sep 26 2013 16:09:41
[    16.526] (++) using VT number 7

[    16.650] (WW) Falling back to old probe method for fglrx
[    16.993] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    17.186] ukiDynamicMajor: failed to open /proc/ati/major
[    17.186] ukiDynamicMajor: failed to open /proc/ati/major
[    17.227] (--) Chipset Supported AMD Graphics Processor (0x68C0) found
[    17.252] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    17.252] (II) fglrx(0): pEnt->device->identifier=0x11b83e0
[    17.252] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[    17.253] (II) Loading sub module "vgahw"
[    17.253] (II) LoadModule: "vgahw"
[    17.253] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    17.277] (II) Module vgahw: vendor="X.Org Foundation"
[    17.277] 	compiled for 1.14.3, module version = 0.1.0
[    17.277] 	ABI class: X.Org Video Driver, version 14.1
[    17.278] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    17.278] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    17.278] (==) fglrx(0): Default visual is TrueColor
[    17.278] (**) fglrx(0): Option "DPMS" "true"
[    17.278] (==) fglrx(0): RGB weight 888
[    17.278] (II) fglrx(0): Using 8 bits per RGB 
[    17.278] (==) fglrx(0): Buffer Tiling is ON
[    17.279] (II) Loading sub module "fglrxdrm"
[    17.279] (II) LoadModule: "fglrxdrm"
[    17.279] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    17.279] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    17.279] 	compiled for 1.4.99.906, module version = 13.20.6
[    17.347] ukiDynamicMajor: failed to open /proc/ati/major
[    17.347] ukiDynamicMajor: failed to open /proc/ati/major
[    17.347] (**) fglrx(0): NoAccel = NO
[    17.347] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[    17.347] (--) fglrx(0): Chipset: "AMD Radeon HD 6570M/5700 Series" (Chipset = 0x68c0)
[    17.347] (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x1c22)
[    17.347] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[    17.347] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[    17.347] (--) fglrx(0): MMIO registers at 0xd0020000
[    17.347] (--) fglrx(0): I/O port at 0x0000d000
[    17.347] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    17.394] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    17.399] (II) Loading sub module "vbe"
[    17.399] (II) LoadModule: "vbe"
[    17.408] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    17.422] (II) Module vbe: vendor="X.Org Foundation"
[    17.422] 	compiled for 1.14.3, module version = 1.1.0
[    17.422] 	ABI class: X.Org Video Driver, version 14.1
[    17.437] (II) fglrx(0): VESA BIOS detected
[    17.437] (II) fglrx(0): VESA VBE Version 3.0
[    17.437] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    17.437] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    17.437] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[    17.437] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    17.437] (II) fglrx(0): VESA VBE OEM Product: MADISON
[    17.437] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    17.463] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[    17.463] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[    17.463] (II) fglrx(0): PCIE card detected
[    17.463] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    17.463] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    17.463] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[    17.463] (II) fglrx(0): RandR 1.2 support is enabled!
[    17.463] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    17.463] (==) fglrx(0): Center Mode is disabled 
[    17.463] (II) Loading sub module "fb"
[    17.463] (II) LoadModule: "fb"
[    17.464] (II) Loading /usr/lib/xorg/modules/libfb.so
[    17.465] (II) Module fb: vendor="X.Org Foundation"
[    17.465] 	compiled for 1.14.3, module version = 1.0.0
[    17.465] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    17.465] (II) Loading sub module "ddc"
[    17.465] (II) LoadModule: "ddc"
[    17.465] (II) Module "ddc" already built-in
[    17.657] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[    17.657] (II) fglrx(0): Output DFP1 has no monitor section
[    17.657] (II) fglrx(0): Output CRT1 has no monitor section
[    17.657] (II) Loading sub module "ddc"
[    17.657] (II) LoadModule: "ddc"
[    17.657] (II) Module "ddc" already built-in
[    17.657] (II) fglrx(0): Connected Display0: LVDS
[    17.657] (II) fglrx(0): Display0 EDID data ---------------------------
[    17.657] (II) fglrx(0): Manufacturer: SEC  Model: 524d  Serial#: 0
[    17.657] (II) fglrx(0): Year: 2009  Week: 0
[    17.657] (II) fglrx(0): EDID Version: 1.3
[    17.657] (II) fglrx(0): Digital Display Input
[    17.657] (II) fglrx(0): Max Image Size [cm]: horiz.: 35  vert.: 20
[    17.657] (II) fglrx(0): Gamma: 2.20
[    17.657] (II) fglrx(0): No DPMS capabilities specified
[    17.657] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    17.657] (II) fglrx(0): First detailed timing is preferred mode
[    17.657] (II) fglrx(0): redX: 0.620 redY: 0.340   greenX: 0.340 greenY: 0.590
[    17.657] (II) fglrx(0): blueX: 0.150 blueY: 0.080   whiteX: 0.313 whiteY: 0.329
[    17.657] (II) fglrx(0): Manufacturer's mask: 0
[    17.657] (II) fglrx(0): Supported detailed timing:
[    17.657] (II) fglrx(0): clock: 72.3 MHz   Image Size:  353 x 198 mm
[    17.657] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    17.657] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    17.657] (II) fglrx(0): Unknown vendor-specific block f
[    17.657] (II) fglrx(0):  SAMSUNG
[    17.657] (II) fglrx(0):  160AT06-A01
[    17.657] (II) fglrx(0): EDID (in hex):
[    17.657] (II) fglrx(0): 	00ffffffffffff004ca34d5200000000
[    17.657] (II) fglrx(0): 	00130103802314780ac0a59e57579726
[    17.657] (II) fglrx(0): 	14505400000001010101010101010101
[    17.657] (II) fglrx(0): 	010101010101411c56a0500016303020
[    17.657] (II) fglrx(0): 	250061c6100000190000000f00000000
[    17.657] (II) fglrx(0): 	00000000001eb4027400000000fe0053
[    17.657] (II) fglrx(0): 	414d53554e470a2020202020000000fe
[    17.657] (II) fglrx(0): 	00313630415430362d4130310a20009e
[    17.657] (II) fglrx(0): End of Display0 EDID data --------------------
[    17.657] (WW) fglrx(0): Dynamic Surface Resizing cannot be enabled
[    17.658] (II) fglrx(0): EDID for output LVDS
[    17.658] (II) fglrx(0): Manufacturer: SEC  Model: 524d  Serial#: 0
[    17.658] (II) fglrx(0): Year: 2009  Week: 0
[    17.658] (II) fglrx(0): EDID Version: 1.3
[    17.658] (II) fglrx(0): Digital Display Input
[    17.658] (II) fglrx(0): Max Image Size [cm]: horiz.: 35  vert.: 20
[    17.658] (II) fglrx(0): Gamma: 2.20
[    17.658] (II) fglrx(0): No DPMS capabilities specified
[    17.658] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    17.658] (II) fglrx(0): First detailed timing is preferred mode
[    17.658] (II) fglrx(0): redX: 0.620 redY: 0.340   greenX: 0.340 greenY: 0.590
[    17.658] (II) fglrx(0): blueX: 0.150 blueY: 0.080   whiteX: 0.313 whiteY: 0.329
[    17.658] (II) fglrx(0): Manufacturer's mask: 0
[    17.658] (II) fglrx(0): Supported detailed timing:
[    17.658] (II) fglrx(0): clock: 72.3 MHz   Image Size:  353 x 198 mm
[    17.658] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    17.658] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    17.658] (II) fglrx(0): Unknown vendor-specific block f
[    17.658] (II) fglrx(0):  SAMSUNG
[    17.658] (II) fglrx(0):  160AT06-A01
[    17.658] (II) fglrx(0): EDID (in hex):
[    17.658] (II) fglrx(0): 	00ffffffffffff004ca34d5200000000
[    17.658] (II) fglrx(0): 	00130103802314780ac0a59e57579726
[    17.658] (II) fglrx(0): 	14505400000001010101010101010101
[    17.658] (II) fglrx(0): 	010101010101411c56a0500016303020
[    17.658] (II) fglrx(0): 	250061c6100000190000000f00000000
[    17.658] (II) fglrx(0): 	00000000001eb4027400000000fe0053
[    17.658] (II) fglrx(0): 	414d53554e470a2020202020000000fe
[    17.658] (II) fglrx(0): 	00313630415430362d4130310a20009e
[    17.658] (II) fglrx(0): EDID vendor "SEC", prod id 21069
[    17.658] (II) fglrx(0): Printing DDC gathered Modelines:
[    17.658] (II) fglrx(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    17.658] (II) fglrx(0): Printing probed modes for output LVDS
[    17.658] (II) fglrx(0): Modeline "1366x768"x60.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    17.658] (II) fglrx(0): Modeline "1360x768"x60.0   72.33  1360 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz e)
[    17.658] (II) fglrx(0): Modeline "1280x768"x60.0   72.33  1280 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz e)
[    17.658] (II) fglrx(0): Modeline "1280x720"x60.0   72.33  1280 1414 1446 1526  720 770 775 790 -hsync -vsync (47.4 kHz e)
[    17.658] (II) fglrx(0): Modeline "1024x768"x60.0   72.33  1024 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz e)
[    17.658] (II) fglrx(0): Modeline "1024x600"x60.0   72.33  1024 1414 1446 1526  600 770 775 790 -hsync -vsync (47.4 kHz e)
[    17.658] (II) fglrx(0): Modeline "800x600"x60.0   72.33  800 1414 1446 1526  600 770 775 790 -hsync -vsync (47.4 kHz e)
[    17.658] (II) fglrx(0): Modeline "800x480"x60.0   72.33  800 1414 1446 1526  480 770 775 790 -hsync -vsync (47.4 kHz e)
[    17.658] (II) fglrx(0): Modeline "640x480"x60.0   72.33  640 1414 1446 1526  480 770 775 790 -hsync -vsync (47.4 kHz e)
[    17.658] (II) fglrx(0): EDID for output DFP1
[    17.658] (II) fglrx(0): EDID for output CRT1
[    17.658] (II) fglrx(0): Output LVDS connected
[    17.658] (II) fglrx(0): Output DFP1 disconnected
[    17.658] (II) fglrx(0): Output CRT1 disconnected
[    17.658] (II) fglrx(0): Using exact sizes for initial modes
[    17.658] (II) fglrx(0): Output LVDS using initial mode 1366x768
[    17.658] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    17.658] (II) fglrx(0): Display dimensions: (350, 200) mm
[    17.658] (II) fglrx(0): DPI set to (99, 97)
[    17.658] (II) fglrx(0): Eyefinity capable adapter detected.
[    17.658] (II) fglrx(0): Adapter AMD Radeon HD 6570M/5700 Series has 6 configurable heads and 1 displays connected.
[    17.658] (==) fglrx(0):  PseudoColor visuals disabled
[    17.658] (II) Loading sub module "ramdac"
[    17.658] (II) LoadModule: "ramdac"
[    17.658] (II) Module "ramdac" already built-in
[    17.658] (==) fglrx(0): NoDRI = NO
[    17.658] (==) fglrx(0): Capabilities: 0x00000000
[    17.658] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    17.658] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    17.658] (==) fglrx(0): UseFastTLS=0
[    17.658] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[    17.658] (--) Depth 24 pixmap format is 32 bpp
[    17.658] (EE) fglrx(0): atiddxDriScreenInit failed. Probably kernel module missing or incompatible. 
[    17.658] (WW) fglrx(0): ***********************************************************
[    17.658] (WW) fglrx(0): * DRI initialization failed                               *
[    17.658] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[    17.658] (WW) fglrx(0): * 2D and 3D acceleration disabled                         *
[    17.658] (WW) fglrx(0): ***********************************************************
[    17.672] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x10000000
[    17.683] (II) fglrx(0): FBMM initialized for area (0,0)-(1600,8191)
[    17.683] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1600,1600) (front color buffer - assumption)
[    17.683] (II) fglrx(0): Largest offscreen area available: 1600 x 6591
[    17.686] (==) fglrx(0): Backing store disabled
[    17.686] Loading extension FGLRXEXTENSION
[    17.686] (**) fglrx(0): DPMS enabled
[    17.687] (II) fglrx(0): Initialized in-driver Xinerama extension
[    17.687] (WW) fglrx(0): Textured Video not supported without DRI enabled.
[    17.687] (II) LoadModule: "glesx"
[    17.699] (II) Loading /usr/lib/xorg/modules/glesx.so
[    17.856] (II) Module glesx: vendor="X.Org Foundation"
[    17.856] 	compiled for 1.4.99.906, module version = 1.0.0
[    17.856] Loading extension GLESX
[    17.856] (II) fglrx(0): GLESX enableFlags = 576
[    17.857] (II) fglrx(0): Enable composite support successfully
[    17.857] (WW) fglrx(0): Option "VendorName" is not used
[    17.857] (WW) fglrx(0): Option "ModelName" is not used
[    17.857] (==) fglrx(0): Silken mouse enabled
[    17.857] (==) fglrx(0): Using HW cursor of display infrastructure!
[    17.858] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    17.895] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[    17.895] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[    18.929] (--) RandR disabled
[    18.941] (II) AIGLX: Screen 0 is not DRI capable
[    18.942] [glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
[    18.942] (II) fglrx(0): Setting screen physical size to 361 x 203
[    19.418] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    19.418] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    19.418] (II) LoadModule: "evdev"
[    19.418] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.444] (II) Module evdev: vendor="X.Org Foundation"
[    19.444] 	compiled for 1.14.3, module version = 2.8.2
[    19.444] 	Module class: X.Org XInput Driver
[    19.444] 	ABI class: X.Org XInput driver, version 19.1
[    19.444] (II) Using input driver 'evdev' for 'Power Button'
[    19.444] (**) Power Button: always reports core events
[    19.444] (**) evdev: Power Button: Device: "/dev/input/event4"
[    19.444] (--) evdev: Power Button: Vendor 0 Product 0x1
[    19.444] (--) evdev: Power Button: Found keys
[    19.444] (II) evdev: Power Button: Configuring as keyboard
[    19.444] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    19.444] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    19.444] (**) Option "xkb_rules" "evdev"
[    19.444] (**) Option "xkb_model" "pc104"
[    19.444] (**) Option "xkb_layout" "us"
[    19.475] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    19.475] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    19.475] (II) Using input driver 'evdev' for 'Video Bus'
[    19.475] (**) Video Bus: always reports core events
[    19.475] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    19.475] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    19.475] (--) evdev: Video Bus: Found keys
[    19.475] (II) evdev: Video Bus: Configuring as keyboard
[    19.475] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input6/event6"
[    19.475] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    19.475] (**) Option "xkb_rules" "evdev"
[    19.475] (**) Option "xkb_model" "pc104"
[    19.475] (**) Option "xkb_layout" "us"
[    19.476] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    19.476] (II) No input driver specified, ignoring this device.
[    19.476] (II) This device may have been added with another device file.
[    19.477] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    19.477] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    19.477] (II) Using input driver 'evdev' for 'Sleep Button'
[    19.477] (**) Sleep Button: always reports core events
[    19.477] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[    19.477] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    19.477] (--) evdev: Sleep Button: Found keys
[    19.477] (II) evdev: Sleep Button: Configuring as keyboard
[    19.477] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[    19.477] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    19.477] (**) Option "xkb_rules" "evdev"
[    19.477] (**) Option "xkb_model" "pc104"
[    19.477] (**) Option "xkb_layout" "us"
[    19.478] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event11)
[    19.478] (II) No input driver specified, ignoring this device.
[    19.478] (II) This device may have been added with another device file.
[    19.479] (II) config/udev: Adding input device USB2.0 UVC 2M WebCam (/dev/input/event12)
[    19.479] (**) USB2.0 UVC 2M WebCam: Applying InputClass "evdev keyboard catchall"
[    19.479] (II) Using input driver 'evdev' for 'USB2.0 UVC 2M WebCam'
[    19.479] (**) USB2.0 UVC 2M WebCam: always reports core events
[    19.479] (**) evdev: USB2.0 UVC 2M WebCam: Device: "/dev/input/event12"
[    19.479] (--) evdev: USB2.0 UVC 2M WebCam: Vendor 0x13d3 Product 0x5122
[    19.479] (--) evdev: USB2.0 UVC 2M WebCam: Found keys
[    19.479] (II) evdev: USB2.0 UVC 2M WebCam: Configuring as keyboard
[    19.479] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input12/event12"
[    19.479] (II) XINPUT: Adding extended input device "USB2.0 UVC 2M WebCam" (type: KEYBOARD, id 9)
[    19.479] (**) Option "xkb_rules" "evdev"
[    19.479] (**) Option "xkb_model" "pc104"
[    19.479] (**) Option "xkb_layout" "us"
[    19.480] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event8)
[    19.480] (II) No input driver specified, ignoring this device.
[    19.480] (II) This device may have been added with another device file.
[    19.480] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event9)
[    19.480] (II) No input driver specified, ignoring this device.
[    19.480] (II) This device may have been added with another device file.
[    19.481] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event1)
[    19.481] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    19.481] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[    19.481] (**) USB Optical Mouse: always reports core events
[    19.481] (**) evdev: USB Optical Mouse: Device: "/dev/input/event1"
[    19.481] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x7
[    19.481] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[    19.481] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[    19.481] (--) evdev: USB Optical Mouse: Found relative axes
[    19.481] (--) evdev: USB Optical Mouse: Found x and y relative axes
[    19.481] (--) evdev: USB Optical Mouse: Found absolute axes
[    19.481] (II) evdev: USB Optical Mouse: Forcing absolute x/y axes to exist.
[    19.481] (II) evdev: USB Optical Mouse: Configuring as mouse
[    19.481] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[    19.481] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    19.481] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    19.481] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/input/input1/event1"
[    19.481] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10)
[    19.481] (II) evdev: USB Optical Mouse: initialized for relative axes.
[    19.481] (WW) evdev: USB Optical Mouse: ignoring absolute axes.
[    19.482] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[    19.482] (**) USB Optical Mouse: (accel) acceleration profile 0
[    19.482] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[    19.482] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[    19.482] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[    19.482] (II) No input driver specified, ignoring this device.
[    19.482] (II) This device may have been added with another device file.
[    19.483] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event7)
[    19.483] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[    19.483] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[    19.483] (**) Asus Laptop extra buttons: always reports core events
[    19.483] (**) evdev: Asus Laptop extra buttons: Device: "/dev/input/event7"
[    19.483] (--) evdev: Asus Laptop extra buttons: Vendor 0 Product 0
[    19.483] (--) evdev: Asus Laptop extra buttons: Found keys
[    19.483] (II) evdev: Asus Laptop extra buttons: Configuring as keyboard
[    19.483] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input7/event7"
[    19.483] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 11)
[    19.483] (**) Option "xkb_rules" "evdev"
[    19.483] (**) Option "xkb_model" "pc104"
[    19.483] (**) Option "xkb_layout" "us"
[    19.484] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    19.484] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    19.484] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    19.484] (**) AT Translated Set 2 keyboard: always reports core events
[    19.484] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    19.484] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    19.484] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    19.484] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    19.484] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    19.484] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    19.484] (**) Option "xkb_rules" "evdev"
[    19.484] (**) Option "xkb_model" "pc104"
[    19.484] (**) Option "xkb_layout" "us"
[    19.484] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
[    19.484] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    19.484] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    19.484] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    19.484] (II) LoadModule: "synaptics"
[    19.484] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    19.499] (II) Module synaptics: vendor="X.Org Foundation"
[    19.499] 	compiled for 1.14.1, module version = 1.7.1
[    19.499] 	Module class: X.Org XInput Driver
[    19.499] 	ABI class: X.Org XInput driver, version 19.1
[    19.499] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    19.499] (**) ETPS/2 Elantech Touchpad: always reports core events
[    19.499] (**) Option "Device" "/dev/input/event10"
[    19.610] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[    19.610] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1152 (res 0)
[    19.610] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 576 (res 0)
[    19.610] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    19.610] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    19.610] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[    19.610] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    19.610] (**) Option "TapButton1" "1"
[    19.610] (**) Option "TapButton2" "2"
[    19.610] (**) Option "TapButton3" "3"
[    19.610] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    19.610] (**) ETPS/2 Elantech Touchpad: always reports core events
[    19.650] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input10/event10"
[    19.650] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[    19.650] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    19.650] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[    19.650] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.155
[    19.650] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    19.651] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    19.651] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    19.651] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    19.651] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    19.651] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    19.651] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    19.652] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    19.652] (II) No input driver specified, ignoring this device.
[    19.652] (II) This device may have been added with another device file.
[    19.660] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    63.340] (II) fglrx(0): EDID vendor "SEC", prod id 21069
[    63.340] (II) fglrx(0): Printing DDC gathered Modelines:
[    63.340] (II) fglrx(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    85.951] (II) fglrx(0): EDID vendor "SEC", prod id 21069
[    85.951] (II) fglrx(0): Printing DDC gathered Modelines:
[    85.951] (II) fglrx(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[   185.172] (EE) fglrx(0): firegl_SetSuspendResumeState FAILED -9.
[   208.199] (EE) fglrx(0): Fail to get resume state, return -9.
[   209.161] (II) fglrx(0): EDID vendor "SEC", prod id 21069
[   209.161] (II) fglrx(0): Printing DDC gathered Modelines:
[   209.161] (II) fglrx(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[   209.170] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[   226.331] (II) UnloadModule: "synaptics"
[   226.331] (II) evdev: AT Translated Set 2 keyboard: Close
[   226.331] (II) UnloadModule: "evdev"
[   226.331] (II) evdev: Asus Laptop extra buttons: Close
[   226.331] (II) UnloadModule: "evdev"
[   226.331] (II) evdev: USB Optical Mouse: Close
[   226.331] (II) UnloadModule: "evdev"
[   226.331] (II) evdev: USB2.0 UVC 2M WebCam: Close
[   226.331] (II) UnloadModule: "evdev"
[   226.331] (II) evdev: Sleep Button: Close
[   226.331] (II) UnloadModule: "evdev"
[   226.331] (II) evdev: Video Bus: Close
[   226.331] (II) UnloadModule: "evdev"
[   226.332] (II) evdev: Power Button: Close
[   226.332] (II) UnloadModule: "evdev"
[   227.415] (EE) Server terminated successfully (0). Closing log file.

Last edited by mojtabazn (2013-10-24 04:53:13)

Offline

#5808 2013-10-24 05:54:39

ivdok
Member
From: Nizhniy Novgorod (ru)
Registered: 2013-07-17
Posts: 56
Website

Re: The AMD/ATI Bar & Grill

Some people reported about brightness issues on beta catalysts. Since I use desktop GPU, there's no need for it as for me. Search in AUR for stable laptop drivers - I bet I've seen them.


I use Arch Linux since 14/07/2013. Not that long, I agree, but I don't think what I will change it in near time - extensive wiki, obvious package manager and big, built-up community makes its job. I use Xfce4 as DE, Xfwm4 + Compton as WM, and for DM... "exec startxfce4" and "compton -b" inside .bash_profile big_smile
[ASUS P5QSE2, Pentium dual-core E5300, HD5770, 2GB RAM, 120G ext4 sda, 320G ntfs sdb]

Offline

#5809 2013-10-24 07:03:11

mojtabazn
Member
Registered: 2013-10-20
Posts: 22

Re: The AMD/ATI Bar & Grill

thanks idont want to downgrade xorg so back to open source driver sad

Last edited by mojtabazn (2013-10-24 07:03:41)

Offline

#5810 2013-10-25 18:38:25

clfarron4
Member
From: London, UK
Registered: 2013-06-28
Posts: 2,162
Website

Re: The AMD/ATI Bar & Grill

Could someone with experience of Catalyst with PowerXpress have a look at this thread please as someone has a problem, and my request for a thread merge hasn't happened yet:

https://bbs.archlinux.org/viewtopic.php?pid=1341242


Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Offline

#5811 2013-10-25 19:04:44

ivdok
Member
From: Nizhniy Novgorod (ru)
Registered: 2013-07-17
Posts: 56
Website

Re: The AMD/ATI Bar & Grill

I have an experience - but, unfortunately, fruitless at the same time. Muxless PX A+I platform. Is there a way to use new catalyst, not 11.8 one?


I use Arch Linux since 14/07/2013. Not that long, I agree, but I don't think what I will change it in near time - extensive wiki, obvious package manager and big, built-up community makes its job. I use Xfce4 as DE, Xfwm4 + Compton as WM, and for DM... "exec startxfce4" and "compton -b" inside .bash_profile big_smile
[ASUS P5QSE2, Pentium dual-core E5300, HD5770, 2GB RAM, 120G ext4 sda, 320G ntfs sdb]

Offline

#5812 2013-10-26 01:27:30

snowblind
Member
Registered: 2013-07-18
Posts: 36

Re: The AMD/ATI Bar & Grill

ivdok wrote:

I have an experience - but, unfortunately, fruitless at the same time. Muxless PX A+I platform. Is there a way to use new catalyst, not 11.8 one?

Muxless Intel/AMD, you can use Bumblebee, though it doesn't work quite as well as Nvidia (mostly because Primus is spotty at best, and VGL isn't as good as Primus): https://github.com/YoRyan/bumblebee-amd-hacks

There is a thread on Github about getting Primus to work with the AMD branch of Bumblebee, but there hasn't been any update on it in several months: https://github.com/amonakov/primus/issues/104

Otherwise, keep in mind that the Catalyst drivers *do* give you the option to run exclusively on the AMD card. I've had success with this in running native games (Dota2 runs great this way, for instance) but dual monitors don't work so well with this setup (lots of artifacts and other strangeness).

That said, keep in mind that the latest Xorg server and FOSS AMD drives *do* feature native offloading, and it works relatively well (though for me, using RadeonSI, I run into issues with the radeonsi driver not being so great yet).

Offline

#5813 2013-10-26 05:08:10

DarksideEE7
Member
From: Arkansas, United States
Registered: 2009-06-06
Posts: 356

Re: The AMD/ATI Bar & Grill

Anyone running a 290X?  I just got mine in today, however I haven't tried the latest beta that supports it supposedly:
http://www.phoronix.com/scan.php?page=n … px=MTQ5NTk

Vi0l0, any chance you could add that to your repo?  Thanks!  Also, I'll be sure to share any details if I get it working.  I have a 3 portrait monitor eyefinity setup so it should be fun....and by that I mean painful.

Offline

#5814 2013-10-26 08:47:45

Half-Shot
Member
From: Chelmsford, Essex, UK
Registered: 2013-10-19
Posts: 18

Re: The AMD/ATI Bar & Grill

I am also getting the error that bountykiller and fiendfan1 had. I am using the catalyst-test package. Building from the AUR as i had been doing recently just gets the same compile errors as they do.

The [catalyst] package does build but i get a host of bugs with it ranging from a black second screen that can't be perswaded to show a desktop from not booting and getting rainbow colours on both screens.

Interestingly according to my logs the module had been failing to build previously since my kernel updated on the 17th but its only become an issue for me today.

Offline

#5815 2013-10-26 09:43:00

haagch
Member
Registered: 2013-08-17
Posts: 207

Re: The AMD/ATI Bar & Grill

Can anyone run amdcccle with the 3.11beta6?

Program received signal SIGSEGV, Segmentation fault.
0x00007ffff685e3db in QString::operator==(QString const&) const () from /usr/lib/libQtCore.so.4
(gdb) bt
#0  0x00007ffff685e3db in QString::operator==(QString const&) const () from /usr/lib/libQtCore.so.4
#1  0x00007ffff7239b95 in QLabel::setText(QString const&) () from /usr/lib/libQtGui.so.4
#2  0x00000000004a0a33 in ?? ()
#3  0x00000000005daed4 in ?? ()
#4  0x00007ffff692ed42 in QMetaObject::activate(QObject*, QMetaObject const*, int, void**) () from /usr/lib/libQtCore.so.4
#5  0x00000000005e14e7 in ?? ()
#6  0x0000000000585f79 in ?? ()
#7  0x00000000005e1544 in ?? ()
#8  0x00007ffff692ed42 in QMetaObject::activate(QObject*, QMetaObject const*, int, void**) () from /usr/lib/libQtCore.so.4
#9  0x00000000005e16da in ?? ()
#10 0x0000000000584932 in ?? ()
#11 0x0000000000586c57 in ?? ()
#12 0x000000000042d83a in ?? ()
#13 0x000000000042a631 in ?? ()
#14 0x0000000000425585 in ?? ()
#15 0x00007ffff4e64bc5 in __libc_start_main () from /usr/lib/libc.so.6
#16 0x0000000000423429 in ?? ()
#17 0x00007fffffffdad8 in ?? ()
#18 0x000000000000001c in ?? ()
#19 0x0000000000000003 in ?? ()
#20 0x00007fffffffdf38 in ?? ()
#21 0x00007fffffffdf4a in ?? ()
#22 0x00007fffffffdf4d in ?? ()
#23 0x0000000000000000 in ?? ()

^
with bumblebee
DISPLAY=:8 optirun amdcccle -i /etc/bumblebee/xorg.conf.fglrx

Last edited by haagch (2013-10-26 09:44:12)

Offline

#5816 2013-10-26 11:49:31

ivdok
Member
From: Nizhniy Novgorod (ru)
Registered: 2013-07-17
Posts: 56
Website

Re: The AMD/ATI Bar & Grill

snowblind wrote:
ivdok wrote:

I have an experience - but, unfortunately, fruitless at the same time. Muxless PX A+I platform. Is there a way to use new catalyst, not 11.8 one?

Muxless Intel/AMD, you can use Bumblebee, though it doesn't work quite as well as Nvidia (mostly because Primus is spotty at best, and VGL isn't as good as Primus): https://github.com/YoRyan/bumblebee-amd-hacks

There is a thread on Github about getting Primus to work with the AMD branch of Bumblebee, but there hasn't been any update on it in several months: https://github.com/amonakov/primus/issues/104

Otherwise, keep in mind that the Catalyst drivers *do* give you the option to run exclusively on the AMD card. I've had success with this in running native games (Dota2 runs great this way, for instance) but dual monitors don't work so well with this setup (lots of artifacts and other strangeness).

That said, keep in mind that the latest Xorg server and FOSS AMD drives *do* feature native offloading, and it works relatively well (though for me, using RadeonSI, I run into issues with the radeonsi driver not being so great yet).

I'd like to use discrete-only, but that "Insyde BIOS" shit is unusable - only minimal configuration available, so I'm stuck with unusable notebook. Well, I use it rarely, if not "once in a lifetime", so there's nothing to do here anymore.


I use Arch Linux since 14/07/2013. Not that long, I agree, but I don't think what I will change it in near time - extensive wiki, obvious package manager and big, built-up community makes its job. I use Xfce4 as DE, Xfwm4 + Compton as WM, and for DM... "exec startxfce4" and "compton -b" inside .bash_profile big_smile
[ASUS P5QSE2, Pentium dual-core E5300, HD5770, 2GB RAM, 120G ext4 sda, 320G ntfs sdb]

Offline

#5817 2013-10-26 12:42:39

snowblind
Member
Registered: 2013-07-18
Posts: 36

Re: The AMD/ATI Bar & Grill

ivdok wrote:

I'd like to use discrete-only, but that "Insyde BIOS" shit is unusable - only minimal configuration available, so I'm stuck with unusable notebook. Well, I use it rarely, if not "once in a lifetime", so there's nothing to do here anymore.

Discrete-only, on a muxless system, doesn't have anything to do with the BIOS -- MUXless systems, by their nature, do not allow for enabling discrete-only via the BIOS.

Discrete-only is achieved, if you use Vi0l0's pxp drivers, by using the pxp_switch_catalyst (or whatever the script is called) and switching to AMD. So you boot your machine, run the pxp switch script, and then restart X (killall X, or if you're running a login manager, logout and log back in). Once you've done that, you *should* be using the discrete GPU, barring any other sort of failure.

Offline

#5818 2013-10-26 14:54:48

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,320
Website

Re: The AMD/ATI Bar & Grill

bountykiller wrote:

After some search, I discovered that the file libfglrx_ip.a get extracted into the folder catalyst-test\src\archive_files\arch\x86_64\lib\modules\fglrx\build_mod when building the package, but it doesn't seems to be present in the package file.

Can someone help me to go further?
Does someone know how this is intented to work?

in the first step makepkg is moving libfglrx_ip.a to the pkg dir, here's PKGBUILD line:

      install -m644 arch/${_archdir}/lib/modules/fglrx/build_mod/libfglrx_ip.a \
                ${pkgdir}/usr/share/ati/build_mod

then pacman is extracting it from the package to the file system. Now catalyst_build_module is able to use it by copying it to the tmp dir, here are atalyst_build_module lines:

    workdir=$(mktemp -du /tmp/catalyst.XXXXXX)
    cp "/usr/share/ati/build_mod" "${workdir}" -R

I had no problems with catalyst-test package, so I assume the problem is on your side.
I would start with making sure that there's no space in the directory name in which you are trying to build the package (makepkg doesn't like space character)

DarksideEE7 wrote:

Anyone running a 290X?  I just got mine in today, however I haven't tried the latest beta that supports it supposedly:
http://www.phoronix.com/scan.php?page=n … px=MTQ5NTk

Vi0l0, any chance you could add that to your repo?  Thanks!  Also, I'll be sure to share any details if I get it working.  I have a 3 portrait monitor eyefinity setup so it should be fun....and by that I mean painful.

Thanks for the info,
13.11 beta 6 feels much better than previous betas.
catalyst-test and catalyst-test-pxp @ AUR were updated, same as [catalyst] repo.
For the first time I'm thinking about moving this beta release to the stable repo tongue - but it's too early, need to test it better.

changes:
- support for R9 290(X)
- fixed so called 30 FPS / Tear-Free / V-Sync bug  - finally!
- a new huge (~40MB) library is inside /usr/lib/hsa and is called libamdocl
- amdcccle supports more languages, new ones are: cs, da, hu, ja, ko


BTW How 290x feels? I was also thinking about buying this monster but the heat that it generates makes me waiting for non-reference model. Is it really that bad? Are you gonna fight the heat with some custom air cooling or WC?

Offline

#5819 2013-10-26 15:01:55

Ambrosia
Member
Registered: 2013-03-26
Posts: 4

Re: The AMD/ATI Bar & Grill

bountykiller wrote:

Hi all,

after upgrading my whole system, i did reboot my computer, then had to reinstall the catalyst-test package because my kernel was upgraded. So far, so good, except that it give me an error saying that the fglrx module failed to build.
The catalyst-install.log file give me this :
--------
2013-10-18 21:06:12
Building fglrx module for 3.11.5-1-ARCH kernel ...
--------
OsVersion says: SMP=1
file /proc/kallsyms says: SMP=1
file /usr/lib/modules/3.11.5-1-ARCH/build/include/generated/autoconf.h says: SMP=1
file /usr/lib/modules/3.11.5-1-ARCH/build/include/generated/autoconf.h says: MODVERSIONS=1
file /usr/lib/modules/3.11.5-1-ARCH/build/arch/x86/include/asm/compat.h says: COMPAT_ALLOC_USER_SPACE=arch_compat_alloc_user_space
make: Entering directory '/usr/src/linux-3.11.5-1-ARCH'
  CC [M]  /tmp/catalyst.WP6osJ/firegl_public.o
  CC [M]  /tmp/catalyst.WP6osJ/kcl_acpi.o
  CC [M]  /tmp/catalyst.WP6osJ/kcl_agp.o
  CC [M]  /tmp/catalyst.WP6osJ/kcl_debug.o
  CC [M]  /tmp/catalyst.WP6osJ/kcl_ioctl.o
  CC [M]  /tmp/catalyst.WP6osJ/kcl_io.o
  CC [M]  /tmp/catalyst.WP6osJ/kcl_pci.o
  CC [M]  /tmp/catalyst.WP6osJ/kcl_str.o
  CC [M]  /tmp/catalyst.WP6osJ/kcl_iommu.o
  CC [M]  /tmp/catalyst.WP6osJ/kcl.o
  CC [M]  /tmp/catalyst.WP6osJ/kcl_wait.o
make[1]: *** No rule to make target '/tmp/catalyst.WP6osJ/libfglrx_ip.a', needed by '/tmp/catalyst.WP6osJ/fglrx.o'.  Stop.
Makefile:1225: recipe for target '_module_/tmp/catalyst.WP6osJ' failed
make: *** [_module_/tmp/catalyst.WP6osJ] Error 2
make: Leaving directory '/usr/src/linux-3.11.5-1-ARCH'


Did someone already had this problem?

I'm now getting this same error after the update today (but on 3.11.6-1 instead). I'm using packer if that helps.

Last edited by Ambrosia (2013-10-26 15:03:36)

Offline

#5820 2013-10-26 15:16:09

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,320
Website

Re: The AMD/ATI Bar & Grill

@Ambrosia:
can you paste the output of:

ls -lh /usr/share/ati/build_mod/libfglrx_ip.a
ls -lh /tmp/catalyst.XXXXXX/libfglrx_ip.a

also please remember that i'm not using/testing anything other than makepkg (and cower to check aur pkgs updates)

Last edited by Vi0L0 (2013-10-26 15:34:19)

Offline

#5821 2013-10-26 15:17:21

DarksideEE7
Member
From: Arkansas, United States
Registered: 2009-06-06
Posts: 356

Re: The AMD/ATI Bar & Grill

Vi0L0 wrote:
bountykiller wrote:

After some search, I discovered that the file libfglrx_ip.a get extracted into the folder catalyst-test\src\archive_files\arch\x86_64\lib\modules\fglrx\build_mod when building the package, but it doesn't seems to be present in the package file.

Can someone help me to go further?
Does someone know how this is intented to work?

in the first step makepkg is moving libfglrx_ip.a to the pkg dir, here's PKGBUILD line:

      install -m644 arch/${_archdir}/lib/modules/fglrx/build_mod/libfglrx_ip.a \
                ${pkgdir}/usr/share/ati/build_mod

then pacman is extracting it from the package to the file system. Now catalyst_build_module is able to use it by copying it to the tmp dir, here are atalyst_build_module lines:

    workdir=$(mktemp -du /tmp/catalyst.XXXXXX)
    cp "/usr/share/ati/build_mod" "${workdir}" -R

I had no problems with catalyst-test package, so I assume the problem is on your side.
I would start with making sure that there's no space in the directory name in which you are trying to build the package (makepkg doesn't like space character)

DarksideEE7 wrote:

Anyone running a 290X?  I just got mine in today, however I haven't tried the latest beta that supports it supposedly:
http://www.phoronix.com/scan.php?page=n … px=MTQ5NTk

Vi0l0, any chance you could add that to your repo?  Thanks!  Also, I'll be sure to share any details if I get it working.  I have a 3 portrait monitor eyefinity setup so it should be fun....and by that I mean painful.

Thanks for the info,
13.11 beta 6 feels much better than previous betas.
catalyst-test and catalyst-test-pxp @ AUR were updated, same as [catalyst] repo.
For the first time I'm thinking about moving this beta release to the stable repo tongue - but it's too early, need to test it better.

changes:
- support for R9 290(X)
- fixed so called 30 FPS / Tear-Free / V-Sync bug  - finally!
- a new huge (~40MB) library is inside /usr/lib/hsa and is called libamdocl
- amdcccle supports more languages, new ones are: cs, da, hu, ja, ko


BTW How 290x feels? I was also thinking about buying this monster but the heat that it generates makes me waiting for non-reference model. Is it really that bad? Are you gonna fight the heat with some custom air cooling or WC?

It's a really good card.  I went from 2 7950s to one of these, and I'm going to add another as soon as the non-BF4 cards become available.  I'm running eyeefinity so the 7950s got taxed pretty badly.

They also seem to have fixed screen tearing with Eyefinity when mixing different display interface types (i. e. Displayport, HDMI, and DVI).  No more screen tearing in Windows.....we'll see if that carries to Linux.

Offline

#5822 2013-10-26 15:49:12

Half-Shot
Member
From: Chelmsford, Essex, UK
Registered: 2013-10-19
Posts: 18

Re: The AMD/ATI Bar & Grill

Vi0L0 wrote:

@Ambrosia:
can you paste the output of:

ls -lh /usr/share/ati/build_mod/libfglrx_ip.a
ls -lh /tmp/catalyst.XXXXXX/libfglrx_ip.a

also please remember that i'm not using/testing anything other than makepkg (and cower to check aur pkgs updates)

Got exactly the same problem.
Ran commands on a clean system install and neither directory holds that file.

Offline

#5823 2013-10-26 16:07:31

ergoschnuffel
Member
Registered: 2013-06-03
Posts: 9

Re: The AMD/ATI Bar & Grill

Got the "same" problem:

--------
2013-10-26 17:31:58
Building fglrx module for 3.11.6-1-ARCH kernel ...
--------
OsVersion says: SMP=1
file /proc/kallsyms says: SMP=1
file /usr/lib/modules/3.11.6-1-ARCH/build/include/generated/autoconf.h says: SMP=1
file /usr/lib/modules/3.11.6-1-ARCH/build/include/generated/autoconf.h says: MODVERSIONS=1
file /usr/lib/modules/3.11.6-1-ARCH/build/arch/x86/include/asm/compat.h says: COMPAT_ALLOC_USER_SPACE=arch_compat_alloc_user_space
make: Entering directory '/usr/src/linux-3.11.6-1-ARCH'
  CC [M]  /tmp/catalyst.xPvrGj/firegl_public.o
  CC [M]  /tmp/catalyst.xPvrGj/kcl_acpi.o
  CC [M]  /tmp/catalyst.xPvrGj/kcl_agp.o
  CC [M]  /tmp/catalyst.xPvrGj/kcl_debug.o
  CC [M]  /tmp/catalyst.xPvrGj/kcl_ioctl.o
  CC [M]  /tmp/catalyst.xPvrGj/kcl_io.o
  CC [M]  /tmp/catalyst.xPvrGj/kcl_pci.o
  CC [M]  /tmp/catalyst.xPvrGj/kcl_str.o
  CC [M]  /tmp/catalyst.xPvrGj/kcl_iommu.o
  CC [M]  /tmp/catalyst.xPvrGj/kcl.o
  CC [M]  /tmp/catalyst.xPvrGj/kcl_wait.o
make[1]: *** No rule to make target '/tmp/catalyst.xPvrGj/libfglrx_ip.a', needed by '/tmp/catalyst.xPvrGj/fglrx.o'.  Stop.
Makefile:1225: recipe for target '_module_/tmp/catalyst.xPvrGj' failed
make: *** [_module_/tmp/catalyst.xPvrGj] Error 2
make: Leaving directory '/usr/src/linux-3.11.6-1-ARCH'
Vi0L0 wrote:
ls -lh /usr/share/ati/build_mod/libfglrx_ip.a
ls -lh /tmp/catalyst.XXXXXX/libfglrx_ip.a

also please remember that i'm not using/testing anything other than makepkg (and cower to check aur pkgs updates)

nothing there
gonna try it by "hand" now...

edit:
makepkg by hand -> same result: failing to build (catalyst_build_module)

edit2:
After messing around in the pkg with no real result i just tried to copy the missing lib at his place..

/usr/share/ati/build_mod/libfglrx_ip.a

and was able to build flgrx.
(As far as i saw it the lib dont get copied in the pkg and thus it isnt there, after install, to build the module)

Last edited by ergoschnuffel (2013-10-26 17:55:15)


Hardware: ati 5870 1gb, xeon 5440@400mhz fsb on Asus P5K-E/WIFI-AP, 8gb ram @harshtimings 1003 mhz, samsung 840 basic 120gb
repos: [all testing] + [mesa-git]

Offline

#5824 2013-10-26 16:45:54

DarksideEE7
Member
From: Arkansas, United States
Registered: 2009-06-06
Posts: 356

Re: The AMD/ATI Bar & Grill

I'm getting seg faults when I start X using the new driver on my 290x.....just ran a basic aticonfig --initial.

Offline

#5825 2013-10-26 18:43:30

Half-Shot
Member
From: Chelmsford, Essex, UK
Registered: 2013-10-19
Posts: 18

Re: The AMD/ATI Bar & Grill

ergoschnuffel wrote:

Got the "same" problem:

--------
2013-10-26 17:31:58
Building fglrx module for 3.11.6-1-ARCH kernel ...
--------
OsVersion says: SMP=1
file /proc/kallsyms says: SMP=1
file /usr/lib/modules/3.11.6-1-ARCH/build/include/generated/autoconf.h says: SMP=1
file /usr/lib/modules/3.11.6-1-ARCH/build/include/generated/autoconf.h says: MODVERSIONS=1
file /usr/lib/modules/3.11.6-1-ARCH/build/arch/x86/include/asm/compat.h says: COMPAT_ALLOC_USER_SPACE=arch_compat_alloc_user_space
make: Entering directory '/usr/src/linux-3.11.6-1-ARCH'
  CC [M]  /tmp/catalyst.xPvrGj/firegl_public.o
  CC [M]  /tmp/catalyst.xPvrGj/kcl_acpi.o
  CC [M]  /tmp/catalyst.xPvrGj/kcl_agp.o
  CC [M]  /tmp/catalyst.xPvrGj/kcl_debug.o
  CC [M]  /tmp/catalyst.xPvrGj/kcl_ioctl.o
  CC [M]  /tmp/catalyst.xPvrGj/kcl_io.o
  CC [M]  /tmp/catalyst.xPvrGj/kcl_pci.o
  CC [M]  /tmp/catalyst.xPvrGj/kcl_str.o
  CC [M]  /tmp/catalyst.xPvrGj/kcl_iommu.o
  CC [M]  /tmp/catalyst.xPvrGj/kcl.o
  CC [M]  /tmp/catalyst.xPvrGj/kcl_wait.o
make[1]: *** No rule to make target '/tmp/catalyst.xPvrGj/libfglrx_ip.a', needed by '/tmp/catalyst.xPvrGj/fglrx.o'.  Stop.
Makefile:1225: recipe for target '_module_/tmp/catalyst.xPvrGj' failed
make: *** [_module_/tmp/catalyst.xPvrGj] Error 2
make: Leaving directory '/usr/src/linux-3.11.6-1-ARCH'
Vi0L0 wrote:
ls -lh /usr/share/ati/build_mod/libfglrx_ip.a
ls -lh /tmp/catalyst.XXXXXX/libfglrx_ip.a

also please remember that i'm not using/testing anything other than makepkg (and cower to check aur pkgs updates)

nothing there
gonna try it by "hand" now...

edit:
makepkg by hand -> same result: failing to build (catalyst_build_module)

edit2:
After messing around in the pkg with no real result i just tried to copy the missing lib at his place..

/usr/share/ati/build_mod/libfglrx_ip.a

and was able to build flgrx.
(As far as i saw it the lib dont get copied in the pkg and thus it isnt there, after install, to build the module)

Yup, i coudln't build it directly either so i'm going to give your solution a try.

Offline

Board footer

Powered by FluxBB