You are not logged in.

#6426 2014-04-04 10:13:10

beardedlinuxgeek
Member
Registered: 2012-09-17
Posts: 25
Website

Re: The AMD/ATI Bar & Grill

What benchmarking tools do you guys use? I'm constantly tweaking my settings, but I never sure if it's better. When you start to compromise between FPS, high details, and tearing (with lag spikes thrown in just to me you miserable), it;s impossible to benchmark my changes based on just how I "feel" it's running.

A benchmark tool for the SourceEngine would be amazing. I know they had one on Windows with Half Life 2.

Offline

#6427 2014-04-04 16:02:19

DarksideEE7
Member
From: Arkansas, United States
Registered: 2009-06-06
Posts: 356

Re: The AMD/ATI Bar & Grill

beardedlinuxgeek wrote:

What benchmarking tools do you guys use? I'm constantly tweaking my settings, but I never sure if it's better. When you start to compromise between FPS, high details, and tearing (with lag spikes thrown in just to me you miserable), it;s impossible to benchmark my changes based on just how I "feel" it's running.

A benchmark tool for the SourceEngine would be amazing. I know they had one on Windows with Half Life 2.

I've seen most people use Unigine benchmarks in the past.  I honestly don't game on Linux (too painful...), so I don't really bother to run graphic benchmarks very often.

Offline

#6428 2014-04-04 17:07:31

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,305
Website

Re: The AMD/ATI Bar & Grill

DarksideEE7 wrote:

Does anyone know why I get an error when I try to get the temperatures and/or clocks of all my cards using aticonfig?  Command and output:

sudo aticonfig --odgt --adapter=all
[sudo] password for USER: 
ERROR - Get temperature failed for Adapter 0 - Supported device 67B0

Adapter 1 - Supported device 67B0
            Sensor 0: Temperature - 42.00 C
ERROR - Get temperature failed for Adapter 2 - Supported device 67B0

Yup, also noticed aticonfig errors. I think its because of a weak 290(X) support. + IIRC lano1106 reported problems with CF on newest catalyst.
Probably related: AMDOverdriveCtrl got problems with fan speed and overdrive

Last edited by Vi0L0 (2014-04-04 17:13:34)

Offline

#6429 2014-04-04 23:37:53

epsilon72
Member
Registered: 2014-04-04
Posts: 1

Re: The AMD/ATI Bar & Grill

I have an issue with fglrx and gnome-shell. 
I can't get vsync to work properly *without* the tear-free desktop setting (Tear-free is kind of crash prone for me and I would like to have vsync off for games like TF2).  It's a strange kind of sync problem, with the top of the screen having horrible tearing, gradually getting less and less until there is almost none at the bottom (regardless of the monitor I use).

Vsync works fine with nvidia, nouveau, intel, and radeon.
I've tried different CLUTTER_VBLANK variables, enabling vsync (without tear-free) in amdcccle, messed with various aticonfig options. 

This is with three different monitors, two different graphics cards (7790 & 5450), and three different distros (Debian Stable, Ubuntu 13.10, Gentoo w/ gnome 3.10).  Arch isn't in that list but I figure this forum/thread is one of the best places to ask about this.

Interestingly, I think Unity (w/ compiz) may suffer from the same issue, so it might not be specific to gnome-shell only.  I haven't tried KDE/Kwin yet.

With compton (using openbox or something similar) I experience the same problem, even when I use

compton --backend glx --vsync opengl-swc

**BUT** when I use

compton --backend glx --vsync opengl-swc --paint-on-overlay

The problem goes away!  I wonder why?

Has anyone else run into this?

Last edited by epsilon72 (2014-04-05 01:25:07)

Offline

#6430 2014-04-05 17:00:32

beardedlinuxgeek
Member
Registered: 2012-09-17
Posts: 25
Website

Re: The AMD/ATI Bar & Grill

DarksideEE7 wrote:

I honestly don't game on Linux (too painful...)

The whole Linux gaming scene has completely changed within the last year now that Steam went to Linux. I never get crashes with Dota, TF2, L4D2, or really any of the ~50 *nix games i have on Steam, but I do get texture errors with Tear Free. I love that you can set

export SDL_VIDEO_MINIMIZE_ON_FOCUS_LOSS=0

to interact with programs on other monitors without minimizing fullscreen windows (or running borderless window hacks).

epsilon72 wrote:

Tear-free is kind of crash prone for me and I would like to have vsync off for games like TF2

I get loads of texture errors when I play TF2 (or any game) with Tear Free on. I turn Tear Free off before I start playing a game and turn it back on after. My advice is to disable all vsync options in your compositor and just use Tear-Free.

epsilon72 wrote:

Interestingly, I think Unity (w/ compiz) may suffer from the same issue

Yup, I don't use Unity but I use Compiz. Under composite I disabled "detect refresh rate", manually set the refresh rate to a value higher than my monitor, and enabled unredirect fullscreen windows. Under OpenGL (still in the compiz options), I disabled "sync to vblank." Maybe you can find equivalent options in Compton.

Strangely enough, my games and my windows all work perfectly with zero tearing on my main monitor even when Tear-Free is off. Screen tearing only happens on my second monitor; I wish I could enable Tear-Free for just that monitor.

Last edited by beardedlinuxgeek (2014-04-05 17:12:10)

Offline

#6431 2014-04-06 23:39:17

Jannis
Member
Registered: 2013-06-03
Posts: 32

Re: The AMD/ATI Bar & Grill

beardedlinuxgeek wrote:

I love that you can set

export SDL_VIDEO_MINIMIZE_ON_FOCUS_LOSS=0

to interact with programs on other monitors without minimizing fullscreen windows (or running borderless window hacks).

WHY DID I NOT KNOW ABOUT THAT?! But seriously, that info made my day. Thank you very much!

Offline

#6432 2014-04-07 09:46:51

Kuci
Member
Registered: 2013-03-29
Posts: 38
Website

Re: The AMD/ATI Bar & Grill

Guys, I constantly get hardlocks when I boot up on battery. My laptop is ASUS U38DT, its Radeon only setup. I use Catalyst PXP, I hadn't had any problems when I used open source drivers. It seems it got better since I've downgraded libdrm from 2.4.53 to 2.4.50. I've tried to set nomodeset but it didn't help. I experienced it with older versions of Catalyst and it lasts up to now. Any help ?

Last edited by Kuci (2014-04-07 09:49:15)


Notebook: ASUS U38DT + Samsung SSD 840 EVO 250GB + Intel Dual Band Wireless AC 7260

GitHub

Offline

#6433 2014-04-08 12:56:13

Alexander
Member
Registered: 2014-03-12
Posts: 16

Re: The AMD/ATI Bar & Grill

Hi, I wrote there a month ago. My problem is that when i try tu change the brightness using Fn+f2 or Fn+f3, the brightness changes only "on one step" and then the PC refuses to execute console applications and it becomes a problem to shut the computer down. The bug is both in KDE and Gnome, so i started to suspect Catalyst. Then i tried the open-source driver, and the bug disappeared. But I want to use the proprietary driver, and don't have any ideas. Could someone help me?

Offline

#6434 2014-04-08 14:01:23

clfarron4
Member
From: London, UK
Registered: 2013-06-28
Posts: 2,162
Website

Re: The AMD/ATI Bar & Grill

Alexander wrote:

Hi, I wrote there a month ago. My problem is that when i try tu change the brightness using Fn+f2 or Fn+f3, the brightness changes only "on one step" and then the PC refuses to execute console applications and it becomes a problem to shut the computer down. The bug is both in KDE and Gnome, so i started to suspect Catalyst. Then i tried the open-source driver, and the bug disappeared. But I want to use the proprietary driver, and don't have any ideas. Could someone help me?

I remember you. You're the one with the AMD 3300M APU with Integrated Radeon 6480G and discrete 6740G aren't you?


Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Offline

#6435 2014-04-08 14:05:09

Alexander
Member
Registered: 2014-03-12
Posts: 16

Re: The AMD/ATI Bar & Grill

clfarron4 wrote:
Alexander wrote:

Hi, I wrote there a month ago. My problem is that when i try tu change the brightness using Fn+f2 or Fn+f3, the brightness changes only "on one step" and then the PC refuses to execute console applications and it becomes a problem to shut the computer down. The bug is both in KDE and Gnome, so i started to suspect Catalyst. Then i tried the open-source driver, and the bug disappeared. But I want to use the proprietary driver, and don't have any ideas. Could someone help me?

I remember you. You're the one with the AMD 3300M APU with Integrated Radeon 6480G and discrete 6740G aren't you?

Yes, sure. I'm still strugling with the problem. Should I post any configuration files?

Offline

#6436 2014-04-08 14:31:48

clfarron4
Member
From: London, UK
Registered: 2013-06-28
Posts: 2,162
Website

Re: The AMD/ATI Bar & Grill

Alexander wrote:
clfarron4 wrote:

I remember you. You're the one with the AMD 3300M APU with Integrated Radeon 6480G and discrete 6740G aren't you?

Yes, sure. I'm still strugling with the problem. Should I post any configuration files?

Let me think...

I would think that you would install the catalyst-utils-pxp package when you install catalyst because you have a Hybrid iGPU + Discrete GPU setup.


Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Offline

#6437 2014-04-08 15:21:39

Alexander
Member
Registered: 2014-03-12
Posts: 16

Re: The AMD/ATI Bar & Grill

but both cars in my PC are Radeons, and as i know the package is for intel+radeon combination, isn't it? but anyway i'll try it.

Offline

#6438 2014-04-08 19:44:44

paulbarbee
Member
Registered: 2010-08-20
Posts: 26

Re: The AMD/ATI Bar & Grill

Hi, I started my laptop and put

packer -Syu

into the terminal. It responded with

error: failed to prepare transaction (could not satisfy dependencies)

and then a bunch of packages that require libgl. I chased down the issue to catalyst-utils.

When I try to upgrade catalyst-utils it gives me the above error. I had catalyst-hook 14-1 so looked at http://mirror.rts-informatique.fr/ to see the latest version. I upgraded catalyst-hook to 14.3 but can't upgrade catalyst-utils. I tried to install catalyst-libgl and catalyst-opencl, neither of which are currently on the system, but they both respond that they conflict with catalyst-utils.

The system boots fine and will start X. My kernel is 3.13.8-1-ARCH 64-bit.

Thank you!

Offline

#6439 2014-04-08 19:49:06

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,305
Website

Re: The AMD/ATI Bar & Grill

check this out (after adding [catalyst] repo to pacman.conf):

SteveK wrote:

I installed the new packages at the same time as updating:

pacman -Syu lib32-catalyst-libgl catalyst-libgl lib32-catalyst-utils catalyst-utils opencl-catalyst

That worked for me.

Last edited by Vi0L0 (2014-04-08 19:49:39)

Offline

#6440 2014-04-08 20:49:32

paulbarbee
Member
Registered: 2010-08-20
Posts: 26

Re: The AMD/ATI Bar & Grill

Thank you! That worked. I had tried removing all of the lib32 packages that seemed to involve catalyst but I guess I missed something.

Offline

#6441 2014-04-08 22:37:13

Roken
Member
From: UK
Registered: 2012-01-16
Posts: 669

Re: The AMD/ATI Bar & Grill

I have an odd one. After my 6670 died (well, it's in its' death throes) I replaced it with my old 4670, downgraded xorg and removed catalyst to replace it with catalyst-hd234k. Everything works, but tear free doesn't get saved.

I've read of the problem on dual head set ups, but this is single head only. My workaround right now is to launch amdcccle as a startup program so that I remember to manually turn tear free on, but any idea why it doesn't get saved.

For info,

aticonfig --set-pcs-u32=DDX,EnableTearFreeDesktop,1

doesn't do anything sad


[img=Speedtest]http://www.speedtest.net/my-result/5145583518[/img]

Nvidia GTX 670 2Gb, AMD Phenom II X4 (965BE) @ 3.6 Ghz (Overclocked) 8GB RAM
Linux user #545703

Offline

#6442 2014-04-09 01:04:25

kageurufu
Member
Registered: 2013-04-01
Posts: 17

Re: The AMD/ATI Bar & Grill

Switched to radeon to see how it would run, and im pleasantly surpised.

the main reason I even care for my graphics drivers and to play Diablo 3 and a couple other games. D3 runs fine in wine, but under radeon it was crashing, GLSL compilation error and segfaulting. Update to the versions from the mesa-git repository, and its running. ~7-10fps higher than under catalyst too, with no noticable graphical issues (played through a couple previously troublesome areas, to check for graphical errors or major slowdown).

Might stick with this boat until Gnome and Catalyst start playing nicely again. I like some of the gnome-3.12 features too much to go back to KDE or xfce

Offline

#6443 2014-04-10 19:22:05

clfarron4
Member
From: London, UK
Registered: 2013-06-28
Posts: 2,162
Website

Re: The AMD/ATI Bar & Grill

Hey, so does anyone have a nice set of instructions of how one migrates from the Open Source driver to AMD Catalyst? I'm surprised there aren't any on the Wiki...

Context: I'm trying to help this person here - https://bbs.archlinux.org/viewtopic.php … 2#p1402762


Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Offline

#6444 2014-04-12 16:00:26

l0vot
Member
Registered: 2011-08-26
Posts: 117

Re: The AMD/ATI Bar & Grill

Can the OSS drivers do crossfire, or re-clock the GPU, or set fan speeds? Last time I used them they couldn't, but if they can now...

Last edited by l0vot (2014-04-12 16:07:14)

Offline

#6445 2014-04-12 16:24:24

HolyGuacamole
Member
Registered: 2012-03-29
Posts: 6

Re: The AMD/ATI Bar & Grill

@l0vot: Crossfire is still not supported but reclocking the GPU and adjusting the fan speed accordingly was implemented a few months ago.
See http://www.x.org/wiki/RadeonFeature/

Offline

#6446 2014-04-13 05:02:59

Arachnid92
Member
From: Chile
Registered: 2011-05-02
Posts: 38
Website

Re: The AMD/ATI Bar & Grill

I don't know if this belongs here, but I'm having a really strange problem after installing and configuring the Catalyst drivers. I managed to get "everything" working (that is, I can launch the XServer and it works) by following the instructions on the wiki but I'm left with a final problem I have yet to solve: GDM does not start. The system boots up just fine, but it doesn't get me to the GDM lock screen, just to a login prompt in a TTY. I have disabled and re-enabled the GDM service several times to no effect, I've tried reinstalling it, and I've tried launching it through the console, but nothing happens. On the other hand, if I run startx I get three XTerm consoles on a black background, from which I can call gnome-shell and get to a working desktop, but even there I can't launch GDM. It was working perfectly with the open source radeon drivers, so I don't really understand what the issue could be.

Here's my Xorg.0.log:

[   112.064] 
X.Org X Server 1.14.5
Release Date: 2013-12-12
[   112.068] X Protocol Version 11, Revision 0
[   112.069] Build Operating System: Linux 3.12.6-1-ARCH x86_64 
[   112.071] Current Operating System: Linux arachnid92ARCH 3.14.0-5-ARCH #1 SMP PREEMPT Fri Apr 11 21:02:33 CEST 2014 x86_64
[   112.071] Kernel command line: initrd=\initramfs-linux.img root=UUID=2dbc77c0-3d74-44a7-b771-77932d7a9930 rw nomodeset
[   112.073] Build Date: 08 January 2014  01:35:51PM
[   112.075]  
[   112.076] Current version of pixman: 0.32.4
[   112.078] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[   112.078] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   112.082] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 13 01:26:58 2014
[   112.083] (==) Using config file: "/etc/X11/xorg.conf"
[   112.084] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   112.084] (==) ServerLayout "aticonfig Layout"
[   112.084] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[   112.084] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[   112.084] (**) |   |-->Device "aticonfig-Device[0]-0"
[   112.084] (==) Automatically adding devices
[   112.084] (==) Automatically enabling devices
[   112.084] (==) Automatically adding GPU devices
[   112.084] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[   112.084] (==) ModulePath set to "/usr/lib/xorg/modules"
[   112.084] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   112.084] (II) Loader magic: 0x7fac20
[   112.084] (II) Module ABI versions:
[   112.084] 	X.Org ANSI C Emulation: 0.4
[   112.084] 	X.Org Video Driver: 14.1
[   112.084] 	X.Org XInput driver : 19.1
[   112.084] 	X.Org Server Extension : 7.0
[   112.086] (--) PCI:*(0:0:1:0) 1002:9900:103c:1848 rev 0, Mem @ 0xd0000000/268435456, 0xf0400000/262144, I/O @ 0x00004000/256
[   112.086] (--) PCI: (0:1:0:0) 1002:6840:103c:1848 rev 0, Mem @ 0xe0000000/268435456, 0xf0300000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[   112.087] Initializing built-in extension Generic Event Extension
[   112.088] Initializing built-in extension SHAPE
[   112.089] Initializing built-in extension MIT-SHM
[   112.090] Initializing built-in extension XInputExtension
[   112.091] Initializing built-in extension XTEST
[   112.092] Initializing built-in extension BIG-REQUESTS
[   112.092] Initializing built-in extension SYNC
[   112.093] Initializing built-in extension XKEYBOARD
[   112.094] Initializing built-in extension XC-MISC
[   112.095] Initializing built-in extension SECURITY
[   112.096] Initializing built-in extension XINERAMA
[   112.097] Initializing built-in extension XFIXES
[   112.098] Initializing built-in extension RENDER
[   112.098] Initializing built-in extension RANDR
[   112.099] Initializing built-in extension COMPOSITE
[   112.100] Initializing built-in extension DAMAGE
[   112.101] Initializing built-in extension MIT-SCREEN-SAVER
[   112.102] Initializing built-in extension DOUBLE-BUFFER
[   112.102] Initializing built-in extension RECORD
[   112.103] Initializing built-in extension DPMS
[   112.104] Initializing built-in extension X-Resource
[   112.105] Initializing built-in extension XVideo
[   112.105] Initializing built-in extension XVideo-MotionCompensation
[   112.106] Initializing built-in extension XFree86-VidModeExtension
[   112.107] Initializing built-in extension XFree86-DGA
[   112.108] Initializing built-in extension XFree86-DRI
[   112.108] Initializing built-in extension DRI2
[   112.108] (II) "glx" will be loaded by default.
[   112.108] (II) LoadModule: "glx"
[   112.109] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   112.109] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[   112.109] 	compiled for 6.9.0, module version = 1.0.0
[   112.110] Loading extension GLX
[   112.110] (II) LoadModule: "fglrx"
[   112.110] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[   112.133] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[   112.133] 	compiled for 1.4.99.906, module version = 13.25.5
[   112.133] 	Module class: X.Org Video Driver
[   112.133] (II) Loading sub module "fglrxdrm"
[   112.133] (II) LoadModule: "fglrxdrm"
[   112.133] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   112.173] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[   112.173] 	compiled for 1.4.99.906, module version = 13.25.5
[   112.173] (II) AMD Proprietary Linux Driver Version Identifier:13.25.5
[   112.173] (II) AMD Proprietary Linux Driver Release Identifier: 13.251                               
[   112.173] (II) AMD Proprietary Linux Driver Build Date: Dec  6 2013 15:19:03
[   112.173] (--) using VT number 1

[   112.179] (WW) Falling back to old probe method for fglrx
[   112.241] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[   112.261] ukiDynamicMajor: found major device number 250
[   112.261] ukiDynamicMajor: found major device number 250
[   112.261] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[   112.262] ukiOpenDevice: node name is /dev/ati/card0
[   112.262] ukiOpenDevice: open result is 9, (OK)
[   114.067] ukiOpenByBusid: ukiOpenMinor returns 9
[   114.067] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[   114.110] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:0) found
[   114.110] (--) Chipset Supported AMD Graphics Processor (0x6840) found
[   114.111] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[   114.111] (**) ChipID override: 0x9900
[   114.111] (**) Chipset Supported AMD Graphics Processor (0x9900) found
[   114.112] (II) fglrx(0): pEnt->device->identifier=0x910780
[   114.112] (II) pEnt->device->identifier=(nil)
[   114.112] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[   114.113] (II) Loading sub module "vgahw"
[   114.113] (II) LoadModule: "vgahw"
[   114.114] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[   114.121] (II) Module vgahw: vendor="X.Org Foundation"
[   114.121] 	compiled for 1.14.5, module version = 0.1.0
[   114.121] 	ABI class: X.Org Video Driver, version 14.1
[   114.122] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[   114.122] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   114.122] (==) fglrx(0): Default visual is TrueColor
[   114.122] (**) fglrx(0): Option "DPMS" "true"
[   114.122] (==) fglrx(0): RGB weight 888
[   114.122] (II) fglrx(0): Using 8 bits per RGB 
[   114.123] (==) fglrx(0): Buffer Tiling is ON
[   114.123] (II) Loading sub module "fglrxdrm"
[   114.123] (II) LoadModule: "fglrxdrm"
[   114.123] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   114.123] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[   114.123] 	compiled for 1.4.99.906, module version = 13.25.5
[   114.126] ukiDynamicMajor: found major device number 250
[   114.126] ukiDynamicMajor: found major device number 250
[   114.126] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[   114.126] ukiOpenDevice: node name is /dev/ati/card0
[   114.126] ukiOpenDevice: open result is 11, (OK)
[   114.126] ukiOpenByBusid: ukiOpenMinor returns 11
[   114.126] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[   114.126] ukiOpenDevice: node name is /dev/ati/card1
[   125.560] ukiOpenDevice: open result is 11, (OK)
[   125.560] ukiOpenByBusid: ukiOpenMinor returns 11
[   125.560] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   125.560] ukiDynamicMajor: found major device number 250
[   125.560] ukiDynamicMajor: found major device number 250
[   125.560] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[   125.560] ukiOpenDevice: node name is /dev/ati/card0
[   125.561] ukiOpenDevice: open result is 12, (OK)
[   125.561] ukiOpenByBusid: ukiOpenMinor returns 12
[   125.561] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[   125.561] (**) fglrx(0): NoAccel = NO
[   125.561] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[   125.561] (--) fglrx(0): Chipset: "AMD Radeon HD 7600M Series" (Chipset = 0x6840)
[   125.561] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x1848)
[   125.561] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[   125.561] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[   125.561] (--) fglrx(0): MMIO registers at 0xf0300000
[   125.561] (--) fglrx(0): I/O port at 0x00003000
[   125.561] (==) fglrx(0): ROM-BIOS at 0x000c0000
[   125.770] (II) fglrx(0): AC Adapter is used
[   125.771] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[   125.771] (--) fglrx(0): Video RAM: 2097152 kByte, Type: DDR3
[   125.771] (II) fglrx(0): PCIE card detected
[   125.771] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[   125.771] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[   125.788] (II) fglrx(0): PowerXpress is enabled for AMD platform.
[   125.788] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x1848)
[   125.788] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[   125.788] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[   125.788] (--) fglrx(0): MMIO registers at 0xf0400000
[   125.788] (--) fglrx(0): I/O port at 0x00004000
[   125.788] (==) fglrx(0): ROM-BIOS at 0x000c0000
[   126.000] (II) fglrx(0): AC Adapter is used
[   126.000] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[   126.000] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[   126.000] (II) fglrx(0): PCIE card detected
[   126.000] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[   126.000] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[   126.001] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x80000000)
[   126.001] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[   126.001] (II) fglrx(0): RandR 1.2 support is enabled!
[   126.001] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[   126.001] (==) fglrx(0): Center Mode is disabled 
[   126.001] (II) Loading sub module "fb"
[   126.001] (II) LoadModule: "fb"
[   126.001] (II) Loading /usr/lib/xorg/modules/libfb.so
[   126.037] (II) Module fb: vendor="X.Org Foundation"
[   126.037] 	compiled for 1.14.5, module version = 1.0.0
[   126.037] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   126.037] (II) Loading sub module "ddc"
[   126.037] (II) LoadModule: "ddc"
[   126.037] (II) Module "ddc" already built-in
[   126.291] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[   126.291] (II) fglrx(0): Output DFP1 has no monitor section
[   126.291] (II) fglrx(0): Output CRT1 has no monitor section
[   126.291] (II) Loading sub module "ddc"
[   126.291] (II) LoadModule: "ddc"
[   126.291] (II) Module "ddc" already built-in
[   126.292] (II) fglrx(0): Connected Display0: LVDS
[   126.292] (II) fglrx(0): Display0 EDID data ---------------------------
[   126.292] (II) fglrx(0): Manufacturer: LGD  Model: 385  Serial#: 0
[   126.292] (II) fglrx(0): Year: 2012  Week: 0
[   126.292] (II) fglrx(0): EDID Version: 1.4
[   126.292] (II) fglrx(0): Digital Display Input
[   126.292] (II) fglrx(0): 6 bits per channel
[   126.292] (II) fglrx(0): Digital interface is undefined
[   126.292] (II) fglrx(0): Max Image Size [cm]: horiz.: 31  vert.: 17
[   126.292] (II) fglrx(0): Gamma: 2.20
[   126.292] (II) fglrx(0): No DPMS capabilities specified
[   126.292] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   126.292] (II) fglrx(0): First detailed timing is preferred mode
[   126.292] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[   126.292] (II) fglrx(0): redX: 0.588 redY: 0.346   greenX: 0.342 greenY: 0.556
[   126.292] (II) fglrx(0): blueX: 0.156 blueY: 0.123   whiteX: 0.313 whiteY: 0.329
[   126.292] (II) fglrx(0): Manufacturer's mask: 0
[   126.292] (II) fglrx(0): Supported detailed timing:
[   126.292] (II) fglrx(0): clock: 76.4 MHz   Image Size:  309 x 174 mm
[   126.292] (II) fglrx(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1610 h_border: 0
[   126.292] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[   126.292] (II) fglrx(0): Supported detailed timing:
[   126.292] (II) fglrx(0): clock: 50.9 MHz   Image Size:  309 x 174 mm
[   126.292] (II) fglrx(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1610 h_border: 0
[   126.292] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[   126.292] (II) fglrx(0): Unknown vendor-specific block 2
[   126.292] (II) fglrx(0): EDID (in hex):
[   126.292] (II) fglrx(0): 	00ffffffffffff0030e4850300000000
[   126.292] (II) fglrx(0): 	00160104901f11780aa9259658578e28
[   126.292] (II) fglrx(0): 	1f505400000001010101010101010101
[   126.292] (II) fglrx(0): 	010101010101d81d56f4500016302430
[   126.292] (II) fglrx(0): 	350035ae1000001be51356f450001630
[   126.292] (II) fglrx(0): 	2430350035ae1000001b000000000000
[   126.292] (II) fglrx(0): 	00000000000000000000000000000002
[   126.292] (II) fglrx(0): 	000c47ff0a3c64121c296400000000dd
[   126.292] (II) fglrx(0): End of Display0 EDID data --------------------
[   126.292] (II) fglrx(0): Dynamic Surface Resizing Enabled
[   126.293] (II) fglrx(0): EDID for output LVDS
[   126.293] (II) fglrx(0): Manufacturer: LGD  Model: 385  Serial#: 0
[   126.293] (II) fglrx(0): Year: 2012  Week: 0
[   126.293] (II) fglrx(0): EDID Version: 1.4
[   126.293] (II) fglrx(0): Digital Display Input
[   126.293] (II) fglrx(0): 6 bits per channel
[   126.293] (II) fglrx(0): Digital interface is undefined
[   126.293] (II) fglrx(0): Max Image Size [cm]: horiz.: 31  vert.: 17
[   126.293] (II) fglrx(0): Gamma: 2.20
[   126.293] (II) fglrx(0): No DPMS capabilities specified
[   126.293] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   126.293] (II) fglrx(0): First detailed timing is preferred mode
[   126.293] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[   126.293] (II) fglrx(0): redX: 0.588 redY: 0.346   greenX: 0.342 greenY: 0.556
[   126.293] (II) fglrx(0): blueX: 0.156 blueY: 0.123   whiteX: 0.313 whiteY: 0.329
[   126.293] (II) fglrx(0): Manufacturer's mask: 0
[   126.293] (II) fglrx(0): Supported detailed timing:
[   126.293] (II) fglrx(0): clock: 76.4 MHz   Image Size:  309 x 174 mm
[   126.293] (II) fglrx(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1610 h_border: 0
[   126.293] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[   126.293] (II) fglrx(0): Supported detailed timing:
[   126.293] (II) fglrx(0): clock: 50.9 MHz   Image Size:  309 x 174 mm
[   126.293] (II) fglrx(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1610 h_border: 0
[   126.293] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[   126.293] (II) fglrx(0): Unknown vendor-specific block 2
[   126.293] (II) fglrx(0): EDID (in hex):
[   126.293] (II) fglrx(0): 	00ffffffffffff0030e4850300000000
[   126.293] (II) fglrx(0): 	00160104901f11780aa9259658578e28
[   126.293] (II) fglrx(0): 	1f505400000001010101010101010101
[   126.293] (II) fglrx(0): 	010101010101d81d56f4500016302430
[   126.293] (II) fglrx(0): 	350035ae1000001be51356f450001630
[   126.293] (II) fglrx(0): 	2430350035ae1000001b000000000000
[   126.293] (II) fglrx(0): 	00000000000000000000000000000002
[   126.293] (II) fglrx(0): 	000c47ff0a3c64121c296400000000dd
[   126.293] (II) fglrx(0): EDID vendor "LGD", prod id 901
[   126.293] (II) fglrx(0): Printing DDC gathered Modelines:
[   126.293] (II) fglrx(0): Modeline "1366x768"x0.0   76.40  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz eP)
[   126.293] (II) fglrx(0): Modeline "1366x768"x0.0   50.93  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz e)
[   126.293] (II) fglrx(0): Printing probed modes for output LVDS
[   126.293] (II) fglrx(0): Modeline "1366x768"x60.0   76.40  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz eP)
[   126.293] (II) fglrx(0): Modeline "1366x768"x40.0   50.93  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz e)
[   126.293] (II) fglrx(0): Modeline "1360x768"x60.0   76.40  1360 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz e)
[   126.293] (II) fglrx(0): Modeline "1360x768"x40.0   50.93  1360 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz e)
[   126.293] (II) fglrx(0): Modeline "1280x768"x60.0   76.40  1280 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz e)
[   126.293] (II) fglrx(0): Modeline "1280x768"x40.0   50.93  1280 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz e)
[   126.293] (II) fglrx(0): Modeline "1280x720"x60.0   76.40  1280 1402 1450 1610  720 771 776 790 +hsync -vsync (47.5 kHz e)
[   126.293] (II) fglrx(0): Modeline "1280x720"x40.0   50.93  1280 1402 1450 1610  720 771 776 790 +hsync -vsync (31.6 kHz e)
[   126.293] (II) fglrx(0): Modeline "1024x768"x60.0   76.40  1024 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz e)
[   126.293] (II) fglrx(0): Modeline "1024x768"x40.0   50.93  1024 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz e)
[   126.293] (II) fglrx(0): Modeline "1024x600"x60.0   76.40  1024 1402 1450 1610  600 771 776 790 +hsync -vsync (47.5 kHz e)
[   126.293] (II) fglrx(0): Modeline "1024x600"x40.0   50.93  1024 1402 1450 1610  600 771 776 790 +hsync -vsync (31.6 kHz e)
[   126.293] (II) fglrx(0): Modeline "800x600"x60.0   76.40  800 1402 1450 1610  600 771 776 790 +hsync -vsync (47.5 kHz e)
[   126.293] (II) fglrx(0): Modeline "800x600"x40.0   50.93  800 1402 1450 1610  600 771 776 790 +hsync -vsync (31.6 kHz e)
[   126.293] (II) fglrx(0): Modeline "800x480"x60.0   76.40  800 1402 1450 1610  480 771 776 790 +hsync -vsync (47.5 kHz e)
[   126.293] (II) fglrx(0): Modeline "800x480"x40.0   50.93  800 1402 1450 1610  480 771 776 790 +hsync -vsync (31.6 kHz e)
[   126.293] (II) fglrx(0): Modeline "640x480"x60.0   76.40  640 1402 1450 1610  480 771 776 790 +hsync -vsync (47.5 kHz e)
[   126.293] (II) fglrx(0): Modeline "640x480"x40.0   50.93  640 1402 1450 1610  480 771 776 790 +hsync -vsync (31.6 kHz e)
[   126.293] (II) fglrx(0): EDID for output DFP1
[   126.293] (II) fglrx(0): EDID for output CRT1
[   126.293] (II) fglrx(0): Output LVDS connected
[   126.293] (II) fglrx(0): Output DFP1 disconnected
[   126.294] (II) fglrx(0): Output CRT1 disconnected
[   126.294] (II) fglrx(0): Using exact sizes for initial modes
[   126.294] (II) fglrx(0): Output LVDS using initial mode 1366x768
[   126.294] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   126.294] (II) fglrx(0): Display dimensions: (310, 170) mm
[   126.294] (II) fglrx(0): DPI set to (111, 114)
[   126.294] (II) fglrx(0): Eyefinity capable adapter detected.
[   126.294] (II) fglrx(0): Adapter AMD Radeon HD 7600M Series has 6 configurable heads and 0 displays connected.
[   126.294] (==) fglrx(0):  PseudoColor visuals disabled
[   126.294] (II) Loading sub module "ramdac"
[   126.294] (II) LoadModule: "ramdac"
[   126.294] (II) Module "ramdac" already built-in
[   126.294] (==) fglrx(0): NoDRI = NO
[   126.294] (==) fglrx(0): Capabilities: 0x00000000
[   126.294] (==) fglrx(0): CapabilitiesEx: 0x00000000
[   126.294] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[   126.294] (==) fglrx(0): UseFastTLS=0
[   126.294] (II) fglrx(0): TearFreeDesktop is not supported on PowerXpress systems currently.
[   126.294] (--) Depth 24 pixmap format is 32 bpp
[   126.294] Loading extension ATIFGLRXDRI
[   126.294] (II) fglrx(0): doing swlDriScreenInit
[   126.294] (II) fglrx(0): swlDriScreenInit for fglrx driver
[   126.294] ukiDynamicMajor: found major device number 250
[   126.294] ukiDynamicMajor: found major device number 250
[   126.294] ukiDynamicMajor: found major device number 250
[   126.294] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[   126.294] ukiOpenDevice: node name is /dev/ati/card0
[   126.294] ukiOpenDevice: open result is 13, (OK)
[   126.294] ukiOpenByBusid: ukiOpenMinor returns 13
[   126.294] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[   126.294] ukiOpenDevice: node name is /dev/ati/card1
[   126.294] ukiOpenDevice: open result is 13, (OK)
[   126.294] ukiOpenByBusid: ukiOpenMinor returns 13
[   126.294] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   126.294] (II) fglrx(0): [uki] DRM interface version 1.0
[   126.294] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[   126.294] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[   126.294] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fdc436e2000
[   126.294] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[   126.294] (II) fglrx(0): [uki] added 1 reserved context for kernel
[   126.294] (II) fglrx(0): swlDriScreenInit done
[   126.294] (II) fglrx(0): Kernel Module Version Information:
[   126.294] (II) fglrx(0):     Name: fglrx
[   126.295] (II) fglrx(0):     Version: 13.25.5
[   126.295] (II) fglrx(0):     Date: Dec  6 2013
[   126.295] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[   126.295] (II) fglrx(0): Kernel Module version matches driver.
[   126.295] (II) fglrx(0): Kernel Module Build Time Information:
[   126.295] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.14.0-5-ARCH
[   126.295] (II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
[   126.295] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[   126.295] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[   126.295] (II) fglrx(0): [uki] register handle = 0x00004000
[   126.298] (II) fglrx(0): Static shadow buffer initialized.
[   126.303] (II) fglrx(0): DRI initialization successfull
[   126.321] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01080000
[   126.328] (==) fglrx(0): Backing store disabled
[   126.328] Loading extension FGLRXEXTENSION
[   126.328] (**) fglrx(0): DPMS enabled
[   126.329] (II) fglrx(0): Initialized in-driver Xinerama extension
[   126.329] (**) fglrx(0): Textured Video is enabled.
[   126.329] (II) LoadModule: "glesx"
[   126.331] (II) Loading /usr/lib/xorg/modules/glesx.so
[   126.447] (II) Module glesx: vendor="X.Org Foundation"
[   126.447] 	compiled for 1.4.99.906, module version = 1.0.0
[   126.447] Loading extension GLESX
[   126.447] (II) fglrx(0): GLESX enableFlags = 848
[   126.448] (II) fglrx(0): GLESX is enabled
[   126.448] (II) LoadModule: "amdxmm"
[   126.448] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[   126.463] (II) Module amdxmm: vendor="X.Org Foundation"
[   126.463] 	compiled for 1.4.99.906, module version = 2.0.0
[   126.465] Loading extension AMDXVOPL
[   126.465] Loading extension AMDXVBA
[   126.466] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[   126.468] (II) fglrx(0): Enable composite support successfully
[   126.468] (WW) fglrx(0): Option "VendorName" is not used
[   126.468] (WW) fglrx(0): Option "ModelName" is not used
[   126.468] (II) fglrx(0): X context handle = 0x1
[   126.468] (II) fglrx(0): [DRI] installation complete
[   126.470] (==) fglrx(0): Silken mouse enabled
[   126.470] (==) fglrx(0): Using HW cursor of display infrastructure!
[   126.471] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   126.483] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[   126.483] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[   127.515] (--) RandR disabled
[   127.586] ukiDynamicMajor: found major device number 250
[   127.586] ukiDynamicMajor: found major device number 250
[   127.586] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[   127.586] ukiOpenDevice: node name is /dev/ati/card0
[   127.586] ukiOpenDevice: open result is 14, (OK)
[   127.586] ukiOpenByBusid: ukiOpenMinor returns 14
[   127.586] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[   127.586] ukiOpenDevice: node name is /dev/ati/card1
[   127.586] ukiOpenDevice: open result is 14, (OK)
[   127.586] ukiOpenByBusid: ukiOpenMinor returns 14
[   127.586] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   127.895] ukiDynamicMajor: found major device number 250
[   127.896] ukiDynamicMajor: found major device number 250
[   127.896] ukiDynamicMajor: found major device number 250
[   127.896] ukiOpenDevice: node name is /dev/ati/card0
[   127.896] ukiOpenDevice: open result is 15, (OK)
[   127.896] ukiGetBusid returned 'PCI:0:1:0'
[   127.896] ukiOpenDevice: node name is /dev/ati/card1
[   127.896] ukiOpenDevice: open result is 15, (OK)
[   127.896] ukiGetBusid returned 'PCI:1:0:0'
[   127.896] ukiOpenDevice: node name is /dev/ati/card2
[   127.896] ukiOpenDevice: open result is -1, (No such device)
[   127.896] ukiOpenDevice: open result is -1, (No such device)
[   127.896] ukiOpenDevice: Open failed
[   127.896] ukiOpenDevice: node name is /dev/ati/card3
[   127.896] ukiOpenDevice: open result is -1, (No such device)
[   127.896] ukiOpenDevice: open result is -1, (No such device)
[   127.896] ukiOpenDevice: Open failed
[   127.896] ukiOpenDevice: node name is /dev/ati/card4
[   127.896] ukiOpenDevice: open result is -1, (No such device)
[   127.896] ukiOpenDevice: open result is -1, (No such device)
[   127.896] ukiOpenDevice: Open failed
[   127.896] ukiOpenDevice: node name is /dev/ati/card5
[   127.896] ukiOpenDevice: open result is -1, (No such device)
[   127.896] ukiOpenDevice: open result is -1, (No such device)
[   127.896] ukiOpenDevice: Open failed
[   127.896] ukiOpenDevice: node name is /dev/ati/card6
[   127.896] ukiOpenDevice: open result is -1, (No such device)
[   127.897] ukiOpenDevice: open result is -1, (No such device)
[   127.897] ukiOpenDevice: Open failed
[   127.897] ukiOpenDevice: node name is /dev/ati/card7
[   127.897] ukiOpenDevice: open result is -1, (No such device)
[   127.897] ukiOpenDevice: open result is -1, (No such device)
[   127.897] ukiOpenDevice: Open failed
[   127.897] ukiOpenDevice: node name is /dev/ati/card8
[   127.897] ukiOpenDevice: open result is -1, (No such device)
[   127.897] ukiOpenDevice: open result is -1, (No such device)
[   127.897] ukiOpenDevice: Open failed
[   127.897] ukiOpenDevice: node name is /dev/ati/card9
[   127.897] ukiOpenDevice: open result is -1, (No such device)
[   127.897] ukiOpenDevice: open result is -1, (No such device)
[   127.897] ukiOpenDevice: Open failed
[   127.897] ukiOpenDevice: node name is /dev/ati/card10
[   127.897] ukiOpenDevice: open result is -1, (No such device)
[   127.897] ukiOpenDevice: open result is -1, (No such device)
[   127.897] ukiOpenDevice: Open failed
[   127.897] ukiOpenDevice: node name is /dev/ati/card11
[   127.897] ukiOpenDevice: open result is -1, (No such device)
[   127.897] ukiOpenDevice: open result is -1, (No such device)
[   127.897] ukiOpenDevice: Open failed
[   127.897] ukiOpenDevice: node name is /dev/ati/card12
[   127.897] ukiOpenDevice: open result is -1, (No such device)
[   127.897] ukiOpenDevice: open result is -1, (No such device)
[   127.897] ukiOpenDevice: Open failed
[   127.897] ukiOpenDevice: node name is /dev/ati/card13
[   127.897] ukiOpenDevice: open result is -1, (No such device)
[   127.897] ukiOpenDevice: open result is -1, (No such device)
[   127.897] ukiOpenDevice: Open failed
[   127.897] ukiOpenDevice: node name is /dev/ati/card14
[   127.897] ukiOpenDevice: open result is -1, (No such device)
[   127.898] ukiOpenDevice: open result is -1, (No such device)
[   127.898] ukiOpenDevice: Open failed
[   127.898] ukiOpenDevice: node name is /dev/ati/card15
[   127.898] ukiOpenDevice: open result is -1, (No such device)
[   127.898] ukiOpenDevice: open result is -1, (No such device)
[   127.898] ukiOpenDevice: Open failed
[   127.898] ukiDynamicMajor: found major device number 250
[   127.898] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[   127.898] ukiOpenDevice: node name is /dev/ati/card0
[   127.898] ukiOpenDevice: open result is 15, (OK)
[   127.898] ukiOpenByBusid: ukiOpenMinor returns 15
[   127.898] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[   128.471] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[   128.473] ukiDynamicMajor: found major device number 250
[   128.473] ukiDynamicMajor: found major device number 250
[   128.473] ukiDynamicMajor: found major device number 250
[   128.473] ukiOpenDevice: node name is /dev/ati/card0
[   128.473] ukiOpenDevice: open result is 16, (OK)
[   128.473] ukiGetBusid returned 'PCI:0:1:0'
[   128.473] ukiOpenDevice: node name is /dev/ati/card1
[   128.473] ukiOpenDevice: open result is 16, (OK)
[   128.473] ukiGetBusid returned 'PCI:1:0:0'
[   128.473] ukiOpenDevice: node name is /dev/ati/card2
[   128.473] ukiOpenDevice: open result is -1, (No such device)
[   128.473] ukiOpenDevice: open result is -1, (No such device)
[   128.473] ukiOpenDevice: Open failed
[   128.473] ukiOpenDevice: node name is /dev/ati/card3
[   128.473] ukiOpenDevice: open result is -1, (No such device)
[   128.473] ukiOpenDevice: open result is -1, (No such device)
[   128.473] ukiOpenDevice: Open failed
[   128.473] ukiOpenDevice: node name is /dev/ati/card4
[   128.473] ukiOpenDevice: open result is -1, (No such device)
[   128.473] ukiOpenDevice: open result is -1, (No such device)
[   128.473] ukiOpenDevice: Open failed
[   128.473] ukiOpenDevice: node name is /dev/ati/card5
[   128.473] ukiOpenDevice: open result is -1, (No such device)
[   128.474] ukiOpenDevice: open result is -1, (No such device)
[   128.474] ukiOpenDevice: Open failed
[   128.474] ukiOpenDevice: node name is /dev/ati/card6
[   128.474] ukiOpenDevice: open result is -1, (No such device)
[   128.474] ukiOpenDevice: open result is -1, (No such device)
[   128.474] ukiOpenDevice: Open failed
[   128.474] ukiOpenDevice: node name is /dev/ati/card7
[   128.474] ukiOpenDevice: open result is -1, (No such device)
[   128.474] ukiOpenDevice: open result is -1, (No such device)
[   128.474] ukiOpenDevice: Open failed
[   128.474] ukiOpenDevice: node name is /dev/ati/card8
[   128.474] ukiOpenDevice: open result is -1, (No such device)
[   128.474] ukiOpenDevice: open result is -1, (No such device)
[   128.474] ukiOpenDevice: Open failed
[   128.474] ukiOpenDevice: node name is /dev/ati/card9
[   128.474] ukiOpenDevice: open result is -1, (No such device)
[   128.474] ukiOpenDevice: open result is -1, (No such device)
[   128.474] ukiOpenDevice: Open failed
[   128.474] ukiOpenDevice: node name is /dev/ati/card10
[   128.474] ukiOpenDevice: open result is -1, (No such device)
[   128.474] ukiOpenDevice: open result is -1, (No such device)
[   128.474] ukiOpenDevice: Open failed
[   128.474] ukiOpenDevice: node name is /dev/ati/card11
[   128.474] ukiOpenDevice: open result is -1, (No such device)
[   128.474] ukiOpenDevice: open result is -1, (No such device)
[   128.474] ukiOpenDevice: Open failed
[   128.474] ukiOpenDevice: node name is /dev/ati/card12
[   128.474] ukiOpenDevice: open result is -1, (No such device)
[   128.474] ukiOpenDevice: open result is -1, (No such device)
[   128.474] ukiOpenDevice: Open failed
[   128.474] ukiOpenDevice: node name is /dev/ati/card13
[   128.474] ukiOpenDevice: open result is -1, (No such device)
[   128.475] ukiOpenDevice: open result is -1, (No such device)
[   128.475] ukiOpenDevice: Open failed
[   128.475] ukiOpenDevice: node name is /dev/ati/card14
[   128.475] ukiOpenDevice: open result is -1, (No such device)
[   128.475] ukiOpenDevice: open result is -1, (No such device)
[   128.475] ukiOpenDevice: Open failed
[   128.475] ukiOpenDevice: node name is /dev/ati/card15
[   128.475] ukiOpenDevice: open result is -1, (No such device)
[   128.475] ukiOpenDevice: open result is -1, (No such device)
[   128.475] ukiOpenDevice: Open failed
[   128.475] ukiDynamicMajor: found major device number 250
[   128.475] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[   128.475] ukiOpenDevice: node name is /dev/ati/card0
[   128.475] ukiOpenDevice: open result is 16, (OK)
[   128.475] ukiOpenByBusid: ukiOpenMinor returns 16
[   128.475] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[   128.566] (II) fglrx(0): Setting screen physical size to 361 x 203
[   129.069] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[   129.069] (**) Power Button: Applying InputClass "system-keyboard"
[   129.069] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   129.069] (II) LoadModule: "evdev"
[   129.070] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   129.100] (II) Module evdev: vendor="X.Org Foundation"
[   129.100] 	compiled for 1.14.3, module version = 2.8.2
[   129.100] 	Module class: X.Org XInput Driver
[   129.100] 	ABI class: X.Org XInput driver, version 19.1
[   129.100] (II) Using input driver 'evdev' for 'Power Button'
[   129.101] (**) Power Button: always reports core events
[   129.101] (**) evdev: Power Button: Device: "/dev/input/event4"
[   129.101] (--) evdev: Power Button: Vendor 0 Product 0x1
[   129.101] (--) evdev: Power Button: Found keys
[   129.101] (II) evdev: Power Button: Configuring as keyboard
[   129.101] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[   129.101] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   129.101] (**) Option "xkb_rules" "evdev"
[   129.101] (**) Option "xkb_model" "pc104"
[   129.101] (**) Option "xkb_layout" "latam"
[   129.156] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[   129.156] (**) Video Bus: Applying InputClass "system-keyboard"
[   129.156] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   129.156] (II) Using input driver 'evdev' for 'Video Bus'
[   129.156] (**) Video Bus: always reports core events
[   129.156] (**) evdev: Video Bus: Device: "/dev/input/event5"
[   129.156] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   129.156] (--) evdev: Video Bus: Found keys
[   129.156] (II) evdev: Video Bus: Configuring as keyboard
[   129.156] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6/event5"
[   129.156] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   129.156] (**) Option "xkb_rules" "evdev"
[   129.156] (**) Option "xkb_model" "pc104"
[   129.156] (**) Option "xkb_layout" "latam"
[   129.157] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[   129.157] (**) Video Bus: Applying InputClass "system-keyboard"
[   129.157] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   129.157] (II) Using input driver 'evdev' for 'Video Bus'
[   129.157] (**) Video Bus: always reports core events
[   129.157] (**) evdev: Video Bus: Device: "/dev/input/event6"
[   129.157] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   129.158] (--) evdev: Video Bus: Found keys
[   129.158] (II) evdev: Video Bus: Configuring as keyboard
[   129.158] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input7/event6"
[   129.158] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[   129.158] (**) Option "xkb_rules" "evdev"
[   129.158] (**) Option "xkb_model" "pc104"
[   129.158] (**) Option "xkb_layout" "latam"
[   129.158] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   129.159] (**) Power Button: Applying InputClass "system-keyboard"
[   129.159] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   129.159] (II) Using input driver 'evdev' for 'Power Button'
[   129.159] (**) Power Button: always reports core events
[   129.159] (**) evdev: Power Button: Device: "/dev/input/event2"
[   129.159] (--) evdev: Power Button: Vendor 0 Product 0x1
[   129.159] (--) evdev: Power Button: Found keys
[   129.159] (II) evdev: Power Button: Configuring as keyboard
[   129.159] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event2"
[   129.159] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[   129.159] (**) Option "xkb_rules" "evdev"
[   129.159] (**) Option "xkb_model" "pc104"
[   129.159] (**) Option "xkb_layout" "latam"
[   129.160] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[   129.160] (II) No input driver specified, ignoring this device.
[   129.160] (II) This device may have been added with another device file.
[   129.160] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event11)
[   129.160] (II) No input driver specified, ignoring this device.
[   129.160] (II) This device may have been added with another device file.
[   129.161] (II) config/udev: Adding input device Mad Catz Mad Catz R.A.T.5 Mouse (/dev/input/event1)
[   129.161] (**) Mad Catz Mad Catz R.A.T.5 Mouse: Applying InputClass "evdev pointer catchall"
[   129.161] (**) Mad Catz Mad Catz R.A.T.5 Mouse: Applying InputClass "R.A.T."
[   129.161] (II) Using input driver 'evdev' for 'Mad Catz Mad Catz R.A.T.5 Mouse'
[   129.161] (**) Mad Catz Mad Catz R.A.T.5 Mouse: always reports core events
[   129.161] (**) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: Device: "/dev/input/event1"
[   129.161] (**) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: ButtonMapping '1 2 3 4 5 0 0 8 9 7 6 12 0 0 0 16 17'
[   129.161] (--) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: Vendor 0x738 Product 0x1705
[   129.161] (--) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: Found 17 mouse buttons
[   129.161] (--) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: Found scroll wheel(s)
[   129.161] (--) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: Found relative axes
[   129.161] (--) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: Found x and y relative axes
[   129.161] (II) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: Configuring as mouse
[   129.161] (II) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: Adding scrollwheel support
[   129.161] (**) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: YAxisMapping: buttons 4 and 5
[   129.161] (**) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   129.161] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/0003:0738:1705.0001/input/input2/event1"
[   129.161] (II) XINPUT: Adding extended input device "Mad Catz Mad Catz R.A.T.5 Mouse" (type: MOUSE, id 10)
[   129.161] (II) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: initialized for relative axes.
[   129.162] (**) Mad Catz Mad Catz R.A.T.5 Mouse: (accel) keeping acceleration scheme 1
[   129.162] (**) Mad Catz Mad Catz R.A.T.5 Mouse: (accel) acceleration profile 0
[   129.162] (**) Mad Catz Mad Catz R.A.T.5 Mouse: (accel) acceleration factor: 2.000
[   129.162] (**) Mad Catz Mad Catz R.A.T.5 Mouse: (accel) acceleration threshold: 4
[   129.162] (II) config/udev: Adding input device Mad Catz Mad Catz R.A.T.5 Mouse (/dev/input/mouse0)
[   129.162] (II) No input driver specified, ignoring this device.
[   129.162] (II) This device may have been added with another device file.
[   129.163] (II) config/udev: Adding input device HP TrueVision HD (/dev/input/event16)
[   129.163] (**) HP TrueVision HD: Applying InputClass "system-keyboard"
[   129.163] (**) HP TrueVision HD: Applying InputClass "evdev keyboard catchall"
[   129.163] (II) Using input driver 'evdev' for 'HP TrueVision HD'
[   129.163] (**) HP TrueVision HD: always reports core events
[   129.163] (**) evdev: HP TrueVision HD: Device: "/dev/input/event16"
[   129.163] (--) evdev: HP TrueVision HD: Vendor 0x64e Product 0xe263
[   129.163] (--) evdev: HP TrueVision HD: Found keys
[   129.163] (II) evdev: HP TrueVision HD: Configuring as keyboard
[   129.163] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb7/7-3/7-3:1.0/input/input17/event16"
[   129.163] (II) XINPUT: Adding extended input device "HP TrueVision HD" (type: KEYBOARD, id 11)
[   129.163] (**) Option "xkb_rules" "evdev"
[   129.163] (**) Option "xkb_model" "pc104"
[   129.163] (**) Option "xkb_layout" "latam"
[   129.164] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[   129.164] (II) No input driver specified, ignoring this device.
[   129.164] (II) This device may have been added with another device file.
[   129.164] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event15)
[   129.164] (II) No input driver specified, ignoring this device.
[   129.164] (II) This device may have been added with another device file.
[   129.164] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event14)
[   129.165] (II) No input driver specified, ignoring this device.
[   129.165] (II) This device may have been added with another device file.
[   129.165] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   129.165] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[   129.165] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   129.165] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   129.165] (**) AT Translated Set 2 keyboard: always reports core events
[   129.165] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   129.165] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   129.165] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   129.165] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   129.165] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   129.165] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[   129.165] (**) Option "xkb_rules" "evdev"
[   129.165] (**) Option "xkb_model" "pc104"
[   129.165] (**) Option "xkb_layout" "latam"
[   129.166] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[   129.166] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   129.166] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   129.166] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[   129.166] (II) LoadModule: "synaptics"
[   129.166] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   129.176] (II) Module synaptics: vendor="X.Org Foundation"
[   129.176] 	compiled for 1.14.4, module version = 1.7.2
[   129.176] 	Module class: X.Org XInput Driver
[   129.176] 	ABI class: X.Org XInput driver, version 19.1
[   129.176] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   129.176] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   129.176] (**) Option "Device" "/dev/input/event10"
[   129.320] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[   129.320] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1234 - 5730 (res 47)
[   129.320] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 934 - 4966 (res 94)
[   129.320] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   129.320] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   129.320] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[   129.320] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   129.320] (**) Option "TapButton1" "1"
[   129.320] (**) Option "TapButton2" "2"
[   129.320] (**) Option "TapButton3" "3"
[   129.320] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   129.320] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   129.400] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[   129.400] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[   129.400] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   129.400] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[   129.400] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.033
[   129.400] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   129.400] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   129.400] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   129.400] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   129.401] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   129.401] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[   129.401] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   129.402] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8)
[   129.402] (II) No input driver specified, ignoring this device.
[   129.402] (II) This device may have been added with another device file.
[   129.402] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[   129.402] (II) No input driver specified, ignoring this device.
[   129.402] (II) This device may have been added with another device file.
[   129.402] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[   129.402] (II) No input driver specified, ignoring this device.
[   129.402] (II) This device may have been added with another device file.
[   129.403] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event12)
[   129.403] (**) HP WMI hotkeys: Applying InputClass "system-keyboard"
[   129.403] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[   129.403] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[   129.403] (**) HP WMI hotkeys: always reports core events
[   129.403] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event12"
[   129.403] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[   129.403] (--) evdev: HP WMI hotkeys: Found keys
[   129.403] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[   129.403] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event12"
[   129.403] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[   129.403] (**) Option "xkb_rules" "evdev"
[   129.403] (**) Option "xkb_model" "pc104"
[   129.404] (**) Option "xkb_layout" "latam"
[   129.404] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event7)
[   129.404] (**) HP Wireless hotkeys: Applying InputClass "system-keyboard"
[   129.404] (**) HP Wireless hotkeys: Applying InputClass "evdev keyboard catchall"
[   129.404] (II) Using input driver 'evdev' for 'HP Wireless hotkeys'
[   129.404] (**) HP Wireless hotkeys: always reports core events
[   129.404] (**) evdev: HP Wireless hotkeys: Device: "/dev/input/event7"
[   129.404] (--) evdev: HP Wireless hotkeys: Vendor 0 Product 0
[   129.405] (--) evdev: HP Wireless hotkeys: Found keys
[   129.405] (II) evdev: HP Wireless hotkeys: Configuring as keyboard
[   129.405] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event7"
[   129.405] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 15)
[   129.405] (**) Option "xkb_rules" "evdev"
[   129.405] (**) Option "xkb_model" "pc104"
[   129.405] (**) Option "xkb_layout" "latam"
[   129.409] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[   146.118] (II) evdev: HP Wireless hotkeys: Close
[   146.118] (II) UnloadModule: "evdev"
[   146.118] (II) evdev: HP WMI hotkeys: Close
[   146.118] (II) UnloadModule: "evdev"
[   146.118] (II) UnloadModule: "synaptics"
[   146.118] (II) evdev: AT Translated Set 2 keyboard: Close
[   146.118] (II) UnloadModule: "evdev"
[   146.118] (II) evdev: HP TrueVision HD: Close
[   146.118] (II) UnloadModule: "evdev"
[   146.118] (II) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: Close
[   146.118] (II) UnloadModule: "evdev"
[   146.118] (II) evdev: Power Button: Close
[   146.118] (II) UnloadModule: "evdev"
[   146.118] (II) evdev: Video Bus: Close
[   146.118] (II) UnloadModule: "evdev"
[   146.118] (II) evdev: Video Bus: Close
[   146.119] (II) UnloadModule: "evdev"
[   146.119] (II) evdev: Power Button: Close
[   146.119] (II) UnloadModule: "evdev"
[   146.121] (II) fglrx(0): Shutdown CMMQS
[   146.121] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[   146.121] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x2000 at 0x7fdc436e2000
[   147.210] (EE) Server terminated successfully (0). Closing log file.

EDIT: Here's the output of journalctl -u gdm. Apparently, there's a segfault in the X server that's bringing the whole thing down, and strangely this segfault only presents itself when launching GDM, and not when running startx.

-- Reboot --
abr 13 02:23:10 arachnid92ARCH systemd[1]: Starting GNOME Display Manager...
abr 13 02:23:11 arachnid92ARCH systemd[1]: Started GNOME Display Manager.
abr 13 02:23:11 arachnid92ARCH gdm-Xorg-:0[350]: X.Org X Server 1.14.5
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Release Date: 2013-12-12
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: X Protocol Version 11, Revision 0
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Build Operating System: Linux 3.12.6-1-ARCH x86_64
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Current Operating System: Linux arachnid92ARCH 3.14.0-5-ARCH #1 SMP PREEMPT Fri Apr 11 21:02:33 CEST 2014 x86_64
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Kernel command line: initrd=\initramfs-linux.img root=UUID=2dbc77c0-3d74-44a7-b771-77932d7a9930 rw nomodeset
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Build Date: 08 January 2014  01:35:51PM
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Current version of pixman: 0.32.4
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Before reporting problems, check http://wiki.x.org
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: to make sure that you have the latest version.
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Markers: (--) probed, (**) from config file, (==) default setting,
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (++) from command line, (!!) notice, (II) informational,
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (++) Log file: "/dev/null", Time: Sun Apr 13 02:23:11 2014
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (==) Using config file: "/etc/X11/xorg.conf"
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (==) Using config directory: "/etc/X11/xorg.conf.d"
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (==) ServerLayout "aticonfig Layout"
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (**) |-->Screen "aticonfig-Screen[0]-0" (0)
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (**) |   |-->Device "aticonfig-Device[0]-0"
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (==) Automatically adding devices
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (==) Automatically enabling devices
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (==) Automatically adding GPU devices
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (==) FontPath set to:
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: /usr/share/fonts/misc/,
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: /usr/share/fonts/TTF/,
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: /usr/share/fonts/OTF/,
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: /usr/share/fonts/Type1/,
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: /usr/share/fonts/100dpi/,
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: /usr/share/fonts/75dpi/
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (==) ModulePath set to "/usr/lib/xorg/modules"
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (II) The server relies on udev to provide the list of input devices.
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: If no devices become available, reconfigure udev or disable AutoAddDevices.
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (II) Loader magic: 0x7fac20
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (II) Module ABI versions:
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: X.Org ANSI C Emulation: 0.4
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: X.Org Video Driver: 14.1
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: X.Org XInput driver : 19.1
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: X.Org Server Extension : 7.0
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (--) PCI:*(0:0:1:0) 1002:9900:103c:1848 rev 0, Mem @ 0xd0000000/268435456, 0xf0400000/262144, I/O @ 0x00004000/256
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (--) PCI: (0:1:0:0) 1002:6840:103c:1848 rev 0, Mem @ 0xe0000000/268435456, 0xf0300000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension Generic Event Extension
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension SHAPE
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension MIT-SHM
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension XInputExtension
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension XTEST
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension BIG-REQUESTS
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension SYNC
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension XKEYBOARD
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension XC-MISC
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension SECURITY
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension XINERAMA
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension XFIXES
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension RENDER
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension RANDR
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension COMPOSITE
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension DAMAGE
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension MIT-SCREEN-SAVER
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension DOUBLE-BUFFER
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension RECORD
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension DPMS
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension X-Resource
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension XVideo
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension XVideo-MotionCompensation
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension XFree86-VidModeExtension
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension XFree86-DGA
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension XFree86-DRI
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Initializing built-in extension DRI2
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (II) "glx" will be loaded by default.
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (II) LoadModule: "glx"
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (II) Module glx: vendor="Advanced Micro Devices, Inc."
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: compiled for 6.9.0, module version = 1.0.0
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: Loading extension GLX
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (II) LoadModule: "fglrx"
abr 13 02:23:12 arachnid92ARCH gdm-Xorg-:0[350]: (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: compiled for 1.4.99.906, module version = 13.25.5
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: Module class: X.Org Video Driver
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE)
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE) Backtrace:
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE) 0: /usr/bin/Xorg (xorg_backtrace+0x3d) [0x57e04d]
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE) 1: /usr/bin/Xorg (0x400000+0x181da9) [0x581da9]
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE) 2: /usr/lib/libpthread.so.0 (0x7f4463820000+0xf880) [0x7f446382f880]
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE) 3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f445f8f0000+0x3bc374) [0x7f445fcac374]
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f445f8f0000+0x3bbf0f) [0x7f445fcabf0f]
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE) 5: /usr/bin/Xorg (0x400000+0x660fc) [0x4660fc]
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE) 6: /usr/bin/Xorg (xf86LoadModules+0xba) [0x4759da]
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE) 7: /usr/bin/Xorg (InitOutput+0x7bf) [0x47620f]
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE) 8: /usr/bin/Xorg (0x400000+0x249db) [0x4249db]
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE) 9: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f4462681b05]
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE) 10: /usr/bin/Xorg (0x400000+0x24f0f) [0x424f0f]
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE)
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE) Segmentation fault at address 0x0
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE)
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: Fatal server error:
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE) Caught signal 11 (Segmentation fault). Server aborting
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE)
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE)
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: Please consult the The X.Org Foundation support
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: at http://wiki.x.org
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: for help.
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE) Please also check the log file at "/dev/null" for additional information.
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE)
abr 13 02:23:13 arachnid92ARCH gdm-Xorg-:0[350]: (EE) Server terminated with error (1). Closing log file.
abr 13 02:23:13 arachnid92ARCH gdm[336]: Child process 350 was already dead.
abr 13 02:23:13 arachnid92ARCH gdm[336]: GdmDisplay: display lasted 2,290812 seconds
abr 13 02:23:13 arachnid92ARCH systemd-coredump[587]: Process 350 (Xorg) dumped core.
abr 13 02:23:13 arachnid92ARCH systemd-coredump[593]: Process 592 (Xorg) dumped core.
abr 13 02:23:13 arachnid92ARCH systemd-coredump[595]: Process 594 (Xorg) dumped core.
abr 13 02:23:13 arachnid92ARCH systemd-coredump[597]: Process 596 (Xorg) dumped core.
abr 13 02:23:13 arachnid92ARCH systemd-coredump[599]: Process 598 (Xorg) dumped core.
abr 13 02:23:13 arachnid92ARCH systemd-coredump[601]: Process 600 (Xorg) dumped core.
abr 13 02:23:32 arachnid92ARCH gdm[336]: Child process 592 was already dead.
abr 13 02:23:32 arachnid92ARCH gdm[336]: GdmDisplay: display lasted 0,053709 seconds
abr 13 02:23:32 arachnid92ARCH gdm[336]: Child process 594 was already dead.
abr 13 02:23:32 arachnid92ARCH gdm[336]: GdmDisplay: display lasted 0,054282 seconds
abr 13 02:23:32 arachnid92ARCH gdm[336]: Child process 596 was already dead.
abr 13 02:23:32 arachnid92ARCH gdm[336]: GdmDisplay: display lasted 0,054868 seconds
abr 13 02:23:32 arachnid92ARCH gdm[336]: Child process 598 was already dead.
abr 13 02:23:32 arachnid92ARCH gdm[336]: GdmDisplay: display lasted 0,045865 seconds
abr 13 02:23:32 arachnid92ARCH gdm[336]: Child process 600 was already dead.
abr 13 02:23:32 arachnid92ARCH gdm[336]: GdmDisplay: display lasted 0,058298 seconds
abr 13 02:23:32 arachnid92ARCH gdm[336]: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors

Last edited by Arachnid92 (2014-04-13 05:33:34)


Keep it simple, stupid.

Offline

#6447 2014-04-13 06:18:51

Bringham
Member
Registered: 2014-04-12
Posts: 4

Re: The AMD/ATI Bar & Grill

Hello everyone.

I'm currently having a problem with the fglrx  drivers as described in THIS thread I made.

If anyone here at the time to give it a look, and help out if possible, I'd be eternally grateful.

Offline

#6448 2014-04-13 08:53:43

Reznor
Member
From: BiH
Registered: 2012-06-23
Posts: 76

Re: The AMD/ATI Bar & Grill

I have very strange problems which started to happen with 3.14 kernel and maybe 3.13 too.
I have laptop ASUS K55N with A8-4500M APU and HD7640G integrated graphics.
Now, first are coming issues with radeon driver:
3.14 kernel only black screen on early start. On late start I get messed screen (looks like broken display).
3.10 kernel it works like it should
But on both kernel my laptop overheats. It is at min. 60C on startup then while browsing or doing some installs/upgrades (not compiling anything) it easily gets to 95C and shuts down when it reaches critical temperature.

Second, fglrx drivers. They work also great. No overheat problem, 41C on startup, gets no more than ~60C doing some usual tasks.
But Gnome3 doesn't work, get Oh no error. Brightness controls via fn keys also are working, but the frustrating thing is that I have to manually raise brightness on every startup, because it's too dark.

To sum up, I would be happy if I get radeon drivers working as it should. I don't need brightness controls, I can set up them by echoing to brightness file or add startup command/script. I would like to solve overheat problem, but I have perfectly working fglrx driver.
So, is there a way to get Gnome3 work on proprietary ati driver?
Any suggestion would be appreciated.


rm -rf /
github

Offline

#6449 2014-04-13 15:59:22

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,305
Website

Re: The AMD/ATI Bar & Grill

Guys I'm planning to remove all archive catalyst repositories - my quota is reaching the limit and most of archive repos won't work because of newest mesa changes, so...
If you want to save some repo from the doom let me know - I could rebuild it for you.
I want to perform this erase withing two weeks.
I will leave all archive xorg repos and 3 main catalyst repos - [catalyst], [catalyst-stable], [catalyst-hd234k]


clfarron4 wrote:

Hey, so does anyone have a nice set of instructions of how one migrates from the Open Source driver to AMD Catalyst? I'm surprised there aren't any on the Wiki...

Context: I'm trying to help this person here - https://bbs.archlinux.org/viewtopic.php … 2#p1402762

Looks like there was no such a need. Got some commands to switch from [mesa-git] to [catalyst] tongue

pacman -Rdd ati-dri-git clang-analyzer-svn clang-svn glamor-egl-git lib32-ati-dri-git lib32-libdrm-git lib32-llvm-libs-svn lib32-llvm-svn lib32-mesa-git lib32-mesa-libgl-git libclc-git libdrm-git llvm-libs-svn llvm-svn mesa-git mesa-libgl-git opencl-mesa-git xf86-video-ati-git llvm-ocaml-svn libcl
pacman -S llvm lib32-llvm mesa lib32-mesa libdrm lib32-libdrm catalyst-hook catalyst-utils catalyst-libgl opencl-catalyst lib32-catalyst-utils lib32-catalyst-libgl lib32-opencl-catalyst

Last edited by Vi0L0 (2014-04-13 15:59:53)

Offline

#6450 2014-04-13 19:12:51

MRWITEK
Member
Registered: 2012-08-24
Posts: 7

Re: The AMD/ATI Bar & Grill

I supppose as long as you save all PKGBUILDs and stuff everything will be fine. Of course, if AMD's tarballs is retrievable.

Last edited by MRWITEK (2014-04-13 19:17:26)

Offline

Board footer

Powered by FluxBB