You are not logged in.

#1 2009-06-23 18:06:10

gujjdo
Member
Registered: 2006-09-18
Posts: 4

2.6.30 kernel panic

Hi!

I just upgraded to 2.6.30 and now i get kernel panic after about 30seconds after it's done booting.
Running on a LG X110.
I also use encrypted filesystems if that has anything to do with it, but otherwise it's quite clean (installed it yesterday and it worked fine on the old kernel).

After a few seconds after boot i get: Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: c033c9dd

Latest changes with pacman:
removed portmap, rt2500
upgraded rt2500, kernel26-firmware, kernel26, rpcbind, madwifi, ndiswrapper, nfs-utils, tiacx
installed librpcsecgss

Anyone have a guess?

Edit: Just downgraded kernel26 and kernel26-firmware to 2.6.29 again and it works fine again, anyone knows why 2.6.30 breaks my system?

Last edited by gujjdo (2009-06-23 18:28:27)

Offline

#2 2009-06-23 18:30:43

jjesso1607
Member
Registered: 2008-08-03
Posts: 9

Re: 2.6.30 kernel panic

Can you tell what you did?  How do you downgrade?

I am having the same problem.

Please I am stuck. I need to back out.

Last edited by jjesso1607 (2009-06-23 18:31:03)

Offline

#3 2009-06-23 18:41:09

gujjdo
Member
Registered: 2006-09-18
Posts: 4

Re: 2.6.30 kernel panic

If you haven't cleaned up old packaged, you can find them in /var/cache/pacman/pkg.
Downgrade by running (as i did, you have to replace the filename to what you have): pacman -Ud kernel26-firmware-2.6.29-1-i686.pkg.tar.gz kernel26-2.6.29.4-i686.pkg.tar.gz

There's a guide here for more help and also some mirrors where you can download old packages if you haven't saved yours: http://wiki.archlinux.org/index.php/Downgrade_packages

edit: and ofc, first, boot up with a bootcd/usb/whatever, chroot to your root-directory and then run the commands above since you probably wont have time to do this before your computer hangs unless it's really fast smile...

Last edited by gujjdo (2009-06-23 18:43:23)

Offline

#4 2009-06-23 18:43:43

jjesso1607
Member
Registered: 2008-08-03
Posts: 9

Re: 2.6.30 kernel panic

Thank you, I'll try this.

Offline

#5 2009-06-23 21:56:00

firewalker
Member
From: Hellas (Greece).
Registered: 2006-06-05
Posts: 457

Re: 2.6.30 kernel panic

Same thing here. Kernel panic after a wile. Downgraded to 2.6.29.

lsmod:

ipv6                  259252  10
aes_i586                7444  2
aes_generic            26964  1 aes_i586
rfcomm                 34628  4
sco                     9656  2
bridge                 47528  0
stp                     2008  1 bridge
llc                     4992  2 bridge,stp
bnep                   10324  2
l2cap                  21076  16 rfcomm,bnep
lm85                   24572  0
hwmon_vid               2708  1 lm85
nls_utf8                1472  2
ntfs                  220832  2
snd_seq_oss            29696  0
snd_seq_midi_event      6004  1 snd_seq_oss
snd_seq                47856  4 snd_seq_oss,snd_seq_midi_event
snd_seq_device          6016  2 snd_seq_oss,snd_seq
arc4                    1588  2
ecb                     2452  2
snd_pcm_oss            36832  0
snd_mixer_oss          14132  1 snd_pcm_oss
snd_intel8x0           28080  2
snd_ac97_codec         96696  1 snd_intel8x0
ac97_bus                1364  1 snd_ac97_codec
snd_pcm                66936  3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer              19132  2 snd_seq,snd_pcm
usbhid                 35168  0
hid                    40064  1 usbhid
rt73usb                24984  0
crc_itu_t               1620  1 rt73usb
rt2x00usb               9780  1 rt73usb
rt2x00lib              26548  2 rt73usb,rt2x00usb
rfkill                  9456  2 rt2x00lib
led_class               3416  1 rt2x00lib
btusb                  11752  2
bluetooth              50916  9 rfcomm,sco,bnep,l2cap,btusb
ppdev                   7192  0
snd                    51108  13 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore               6112  1 snd
snd_page_alloc          8124  2 snd_intel8x0,snd_pcm
pcspkr                  2196  0
lp                      8900  0
i2c_i801                8744  0
ne2k_pci                8352  0
8390                    8692  1 ne2k_pci
nvidia               7089896  24
ohci_hcd               23332  0
iTCO_wdt               10584  0
iTCO_vendor_support     2840  1 iTCO_wdt
i2c_core               20616  3 lm85,i2c_i801,nvidia
sg                     25352  0
parport_pc             34532  1
parport                30796  3 ppdev,lp,parport_pc
uhci_hcd               22404  0
ehci_hcd               34688  0
shpchp                 31816  0
pci_hotplug            27060  1 shpchp
intel_agp              25436  1
agpgart                29332  2 nvidia,intel_agp
evdev                   9312  3
thermal                15056  0
processor              38720  1 thermal
fan                     4056  0
button                  5700  0
battery                 9816  0
ac                      3832  0
loop                   13664  0
rtl8187                43732  0
mac80211              158652  3 rt2x00usb,rt2x00lib,rtl8187
eeprom_93cx6            1684  1 rtl8187
cfg80211               36524  3 rt2x00lib,rtl8187,mac80211
ftdi_sio               48860  0
usbserial              30248  1 ftdi_sio
usbcore               134576  11 usbhid,rt73usb,rt2x00usb,btusb,ohci_hcd,uhci_hcd,ehci_hcd,rtl8187,ftdi_sio,usbserial
fuse                   54576  2
floppy                 53124  0
rtc_cmos               10156  0
rtc_core               16400  1 rtc_cmos
rtc_lib                 2324  1 rtc_core
reiserfs              231296  2
sr_mod                 14756  0
cdrom                  33856  1 sr_mod
sd_mod                 25328  8
pata_acpi               3828  0
ata_generic             4536  0
ata_piix               21816  6
libata                156908  3 pata_acpi,ata_generic,ata_piix
scsi_mod              100404  4 sg,sr_mod,sd_mod,libata

Γίνε ρεαλιστής, μείνε ονειροπόλος ...

Offline

#6 2009-06-23 23:02:45

firewalker
Member
From: Hellas (Greece).
Registered: 2006-06-05
Posts: 457

Re: 2.6.30 kernel panic

I think it has to do with wicd and the mouse movement. If I start my system without moving the mouse it works. Moving the mouse gives me a kernel panic. Disabling wicd or starting it after X has started (or any other system that handles the mouse like gpm for example in console) the system starts without kernel panic.

Can someone verify?

Last edited by firewalker (2009-06-24 07:32:35)


Γίνε ρεαλιστής, μείνε ονειροπόλος ...

Offline

#7 2009-06-24 00:29:11

jjesso1607
Member
Registered: 2008-08-03
Posts: 9

Re: 2.6.30 kernel panic

gujjdo wrote:

Hi!

I just upgraded to 2.6.30 and now i get kernel panic after about 30seconds after it's done booting.
Running on a LG X110.
I also use encrypted filesystems if that has anything to do with it, but otherwise it's quite clean (installed it yesterday and it worked fine on the old kernel).

After a few seconds after boot i get: Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: c033c9dd

Latest changes with pacman:
removed portmap, rt2500
upgraded rt2500, kernel26-firmware, kernel26, rpcbind, madwifi, ndiswrapper, nfs-utils, tiacx
installed librpcsecgss

Anyone have a guess?

Edit: Just downgraded kernel26 and kernel26-firmware to 2.6.29 again and it works fine again, anyone knows why 2.6.30 breaks my system?

Downgrading caused me all sort of errors and then black screen of nothing.

Offline

#8 2009-06-24 00:42:29

fukawi2
Forum Moderator
From: .vic.au
Registered: 2007-09-28
Posts: 5,304
Website

Re: 2.6.30 kernel panic

FWIW, I have encrypted partitions and upgrading to .30 caused no problems so I don't think it's crypt that's the problem.

Offline

#9 2009-06-24 09:09:15

aymara
Member
From: Argentina
Registered: 2008-07-08
Posts: 59
Website

Re: 2.6.30 kernel panic

I think it has to do with wicd.

I start my sistem and everything works fine till I try to connect to wireless via wicd. When do so, all sistem freeze, and y have to unplug my laptop, reset button doesn't work either.

If i don't use wicd all goes fine... ¿Any ideas?


http://archlinux.me/aymara/ ----> Newbie forever...  ¬¬

Offline

#10 2009-06-24 10:13:18

R00KIE
Forum Moderator
From: Between a computer and a chair
Registered: 2008-09-14
Posts: 3,376

Re: 2.6.30 kernel panic

Those of you that suspect wicd, which wireless cards do you have?
Maybe it's a problem in the driver.

Here I'm using wicd and the following card and I have no problems

06:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
    Subsystem: Device 1a3b:1026
    Flags: bus master, fast devsel, latency 0, IRQ 19
    Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: ath5k
    Kernel modules: ath5k

R00KIE
Tm90aGluZyB0byBzZWUgaGVyZSwgbW92ZSBhbG9uZy4K

Offline

#11 2009-06-24 10:20:51

aymara
Member
From: Argentina
Registered: 2008-07-08
Posts: 59
Website

Re: 2.6.30 kernel panic

R00KIE wrote:

Those of you that suspect wicd, which wireless cards do you have?
Maybe it's a problem in the driver.

Here I'm using wicd and the following card and I have no problems

06:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
    Subsystem: Device 1a3b:1026
    Flags: bus master, fast devsel, latency 0, IRQ 19
    Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: ath5k
    Kernel modules: ath5k

My wireless card:

02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller (rev 22)
    Subsystem: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller
    Flags: bus master, fast devsel, latency 0, IRQ 17
    I/O ports at ec00 [size=256]
    Memory at febfc000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: r8180
    Kernel modules: rtl8187se


http://archlinux.me/aymara/ ----> Newbie forever...  ¬¬

Offline

#12 2009-06-24 11:05:01

firewalker
Member
From: Hellas (Greece).
Registered: 2006-06-05
Posts: 457

Re: 2.6.30 kernel panic

I am using a D-Link usb wireless card. It uses the ralink rt73 chip. It loads rt73usb module.

Bus 001 Device 004: ID 07d1:3c03 D-Link System DWL-G122 802.11g Adapter [ralink rt73]
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x07d1 D-Link System
  idProduct          0x3c03 DWL-G122 802.11g Adapter [ralink rt73]
  bcdDevice            0.01
  iManufacturer           1
  iProduct                2
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              300mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval

Γίνε ρεαλιστής, μείνε ονειροπόλος ...

Offline

#13 2009-06-24 11:49:09

hotzenpl0tz
Member
Registered: 2008-12-10
Posts: 4

Re: 2.6.30 kernel panic

I get the same error when I attach a certain usb device (a x10-rf receiver with lirc and lirc_atiusb modules). Wonder if this might be an issue with some usb devices in general ?

Offline

#14 2009-06-24 11:57:13

firewalker
Member
From: Hellas (Greece).
Registered: 2006-06-05
Posts: 457

Re: 2.6.30 kernel panic

It has to be usb and wicd (wireless in general) related issue.

I changed my usb mouse 15d9:0a33 with another usb 046d:c51a mouse. Everything works.

If I start my pc without any usb mouse or with a ps2 mouse only I have a kernel panic. It only starts with the second mouse attached.

It always starts fine if my usb wireless is removed or wicd is turned off.

I believe that when the kernel tries to communicate with a pointing device wile wireless is active it crashes.


Γίνε ρεαλιστής, μείνε ονειροπόλος ...

Offline

#15 2009-06-24 12:00:21

hotzenpl0tz
Member
Registered: 2008-12-10
Posts: 4

Re: 2.6.30 kernel panic

Don't think "wireless" has anything to do with it "per se". I don't have any wireless cards/modules active at all. I am guessing certain usb devices in general trigger the error, see this report here with an usb tv card: https://bugs.launchpad.net/ubuntu/+sour … bug/374387

Offline

#16 2009-06-24 17:15:21

Shapeshifter
Member
Registered: 2008-03-11
Posts: 217

Re: 2.6.30 kernel panic

Also just experienced a kernel panic on my arch, it's been running for a few hours though, and it was the first problem since the upgrade yesterday. Odd. The other box has had no problems yet.

Offline

#17 2009-06-25 03:02:33

hunterthomson
Member
Registered: 2008-06-22
Posts: 794
Website

Re: 2.6.30 kernel panic

WOW, Thank you All big_smile

I was freaking out... just a bit roll I am making a full backup right after I post this....


Ya, I was getting that kernel panic like right after I login. I would start typing startx and only get to
star(Kernel Panic bla bla bla)

I just booting into a live Ubuntu and then !banged out the wicd in the Daemons array. Viola ! It works no panic.

Hardware:
HP elitebook 8530w w/ATI Mobility FireGL v5700 (aka HD3650)

Wireless >> Intel WiFi 5300 bgn


OpenBSD-current Thinkpad X230, i7-3520M, 16GB CL9 Kingston, Samsung 830 256GB
Contributor: linux-grsec

Offline

#18 2009-06-25 09:59:35

redada
Member
From: Stuttgart
Registered: 2009-06-25
Posts: 14

Re: 2.6.30 kernel panic

hotzenpl0tz wrote:

I get the same error when I attach a certain usb device (a x10-rf receiver with lirc and lirc_atiusb modules). Wonder if this might be an issue with some usb devices in general ?

Exaclty the same here. No more remote control. sad

Offline

#19 2009-06-25 15:56:22

SystemParadox
Member
From: Tavistock (Devon) and Bristol
Registered: 2006-06-09
Posts: 35
Website

Re: 2.6.30 kernel panic

Same issue here with fresh install on an old Thinkpad 570. No wireless cards. Was working fine when I installed a few weeks ago- just did a fresh install on a bigger HDD and now it's broken.

Mine happens when Loading UDev uevents on boot.

Last edited by SystemParadox (2009-06-25 15:56:52)

Offline

#20 2009-06-25 15:58:48

haggy
Member
From: Wild southern germany
Registered: 2007-05-22
Posts: 213
Website

Re: 2.6.30 kernel panic

Well at least my box was running fine for ~3 hours doing audio work in ardour on a fresh installation. i only have one usb receiver plugged in for my keyboard/mouse.


xbmc guy with all of my heart.
if you have trouble, please read this and submit a proper problem description and maybe bugreport over at xbmc.org.

Offline

#21 2009-06-26 03:23:32

aymara
Member
From: Argentina
Registered: 2008-07-08
Posts: 59
Website

Re: 2.6.30 kernel panic

I've noticed that kernel panics related to my wifi, started just after upgrade and install this packages:

removed portmap (6.0-4)
installed libtirpc (0.2.0-1)
installed rpcbind (0.2.0-1)
upgraded fam (2.7.0-12 -> 2.7.0-14)

Any clue??


http://archlinux.me/aymara/ ----> Newbie forever...  ¬¬

Offline

#22 2009-06-26 13:49:57

eldalion
Member
From: Chapel Hill, NC
Registered: 2008-03-11
Posts: 35

Re: 2.6.30 kernel panic

It is wicd. No problem at all when wireless is disabled at bootup using fn keys. As soon as I hit refressh in wicd-ncurses,
Kernel panic: not syncing: stack-rpotector: kernel stack in corrupted in c033c9dd.
I am not using a usb wifi card. Downgrading to kernel .29 fixes it.

Last edited by eldalion (2009-06-26 13:50:46)

Offline

#23 2009-06-26 14:33:41

firewalker
Member
From: Hellas (Greece).
Registered: 2006-06-05
Posts: 457

Re: 2.6.30 kernel panic

For me it happens with wicd uninstalled. When any program tries to initialize and use the usb wireless will trigger a kernel panic in combination with my mouse. Also user with no wireless face kernel panic with their usb devices.

Last edited by firewalker (2009-06-26 14:34:52)


Γίνε ρεαλιστής, μείνε ονειροπόλος ...

Offline

#24 2009-06-26 14:50:06

tuxce
Member
Registered: 2008-02-19
Posts: 56
Website

Re: 2.6.30 kernel panic

I also have this issue with an msi wind u100x
kernel panics when wifi connects to a network and X running
without X, I can connect with no problems

Offline

#25 2009-06-26 16:21:53

aymara
Member
From: Argentina
Registered: 2008-07-08
Posts: 59
Website

Re: 2.6.30 kernel panic

aymara wrote:
R00KIE wrote:

Those of you that suspect wicd, which wireless cards do you have?
Maybe it's a problem in the driver.

Here I'm using wicd and the following card and I have no problems

06:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
    Subsystem: Device 1a3b:1026
    Flags: bus master, fast devsel, latency 0, IRQ 19
    Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: ath5k
    Kernel modules: ath5k

My wireless card:

02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller (rev 22)
    Subsystem: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller
    Flags: bus master, fast devsel, latency 0, IRQ 17
    I/O ports at ec00 [size=256]
    Memory at febfc000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: r8180
    Kernel modules: rtl8187se

It seems to be a problem with my wireless card and new kernel. A bug is reported. So, meanwhile, I've downgrade to .29. That fixed the problem by now.


http://archlinux.me/aymara/ ----> Newbie forever...  ¬¬

Offline

Board footer

Powered by FluxBB