You are not logged in.
It was working very much fine earlier. I don't know how it has vanished. The point that I gathered for reference are as follows:
1. The sound card is :
[bhoot@Mordor ~]$ lspci | grep Audio
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA)
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series]2. The backend to phonon is gstreamer with all the packages (good, bad and ugly) installed. I also tried phonon-vlc to no avail.
3. PulseAudio is installed currently on my system. The sound had disappeared before installing PulseAudio, though. I installed it in the hopes that it will bring back the sound, but in vain.
4. One thing worth mentioning is that there is not /etc/modprobe.d/alsa.conf file. Other posts concerning sound problems had mentioned this file.
5. alsamixer shows volume "100" in the only displayed channel "PulseAudio".
6. When I test the speaker settings, or the currently selected sound card from the Phonon settings, the test seems to go through, but no sound happens. I also tried aplay; no sound was produced again, even though the file had seemed to play successfully.
7. I also created a new user to see if anything changes. No sound in the new user account, too.
8. The currently settings in Phonon Settings are:
Audio Playback Device Order:
a. Built-in Audio Analog Stereo.
b. "RV710/730 HDMI Audio[Radeon HD 4000 Series] Digital Stereo (HDMI)
I tried preferring the HDMI one, to no avail.
So, any thoughts or solution to my problem?
Last edited by GhostIdentity (2012-06-19 18:04:31)
Offline
PulseAudio dont fix a faulty installation of alsa. Begin with configure a working alsa enviroment. After that you can install pulseAudio if you like.
Have you read this? https://wiki.archlinux.org/index.php/Ad … chitecture control indf
Maybe as you use phonon you could have some problem with kde use wrong device in the phonon configuration menu.
Last edited by Odaer (2012-06-18 16:01:36)
Offline
PulseAudio dont fix a faulty installation of alsa. Begin with configure a working alsa enviroment. After that you can install pulseAudio if you like.
Have you read this? https://wiki.archlinux.org/index.php/Ad … chitecture control indf
Maybe as you use phonon you could have some problem with kde use wrong device in the phonon configuration menu.
Holy Cow! As per your recommendations, I started going through the wiki, checking if everything is as desired. Some text in there suddenly made me wonder if I could hear the sound in headphones. I hadn't checked that. And voila! Its working through headphones.
Now, I have checked the laptop speakers in Windows 7. They are working perfectly. What would I have to do to bring back sound through them?
Offline
You can try adding this line to your /etc/modprobe.d/modprobe.conf:
options snd-hda-intel model=MODELWhere MODEL is name from this list:
HDA-Audio-Models
You can get your chip name with this command:
cat /proc/asound/card*/codec* | grep CodecIf You want to try different models and options without the need for reboot, try:
sudo rmmod -f snd-hda-intel
sudo modprobe snd-hda-intel model=xxxYou can also check my very similar (if not the same) problem:
https://bbs.archlinux.org/viewtopic.php?id=143572
Last edited by szorti (2012-06-18 19:39:54)
Offline
You can try adding this line to your /etc/modprobe.d/modprobe.conf:
options snd-hda-intel model=MODELWhere MODEL is name from this list:
HDA-Audio-Models
You can get your chip name with this command:cat /proc/asound/card*/codec* | grep CodecIf You want to try different models and options without the need for reboot, try:
sudo rmmod -f snd-hda-intel sudo modprobe snd-hda-intel model=xxxYou can also check my very similar (if not the same) problem:
https://bbs.archlinux.org/viewtopic.php?id=143572
I did try that with $MODEL='laptop'; it didn't work, however.
Now that I know where to get the model names, I will try it as soon as I get home, and report back.
Offline
I have a similar issue since I installed Arch, two days ago. I can listen with headphones but not from the speakers... This command "cat /proc/asound/card*/codec* | grep Codec" shows me this:
[lloople@lloople-dv6 ~]$ cat /proc/asound/card*/codec* | grep Codec
Codec: IDT 92HD75B3X5
Codec: ATI R6xx HDMI
And when I do a "lspci" I found two Audio entries:
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series]
Does anyone knows how to enable audio in speakers? On Gnome 3 settings I cand choose between both, and when I choose the ATI RADEON output sound dissapears and reproduction speeds up, audio and video (even flash on YouTube)
Offline
I tried the following line in /etc/modprobe.d/modprobe.conf:
options snd-hda-intel model=auto The sound is working now. :-)
I also re-installed PulseAudio after that. Its working flawlessly, too.
However, I would also like to mention that before I could check that setting, my system had got upgraded to a newer linux kernel. So, I can't be sure if that line was the real solution.
I am marking this thread as solved, anyways.
Thank you all for your help. ![]()
Last edited by GhostIdentity (2012-06-19 18:07:16)
Offline