I have a machine that does everything, it's my router, WirelessAP(s), NAS, etc. and I've set up a DLNA server on it, but it's not being seen by any DLNA compliant devices (DLNA apps on Android Tablet or a WDTV Live). I've tried both MiniDLNA and MediaTomb (not at the same time) and they both seem to run and work fine on the server, but no devices ever pick them up.
Is there likely to be something I need to do to get this working in addition to just installing them? I thought it may be a port related issue so I installed and set up miniUPnPd as well, but that doesn't seem to have helped.
IPTables only has one rule and that's to allow MASQ, so NAT to access the internet. It's not blocking anything.
Any ideas on what's likely to be the cause here?
Random machine info, let me know if you'd like some other information that I haven't listed.
root@emerald ~ $ netstat --inet -nlp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:953 0.0.0.0:* LISTEN 641/named tcp 0 0 0.0.0.0:51677 0.0.0.0:* LISTEN 28863/miniupnpd tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 1390/smbd tcp 0 0 0.0.0.0:222 0.0.0.0:* LISTEN 1007/sshd tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1969/mono tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 1390/smbd tcp 0 0 0.0.0.0:5900 0.0.0.0:* LISTEN 2078/x11vnc tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 1696/transmission-d tcp 0 0 0.0.0.0:8081 0.0.0.0:* LISTEN 1895/python2 tcp 0 0 0.0.0.0:8082 0.0.0.0:* LISTEN 1743/python2 tcp 0 0 0.0.0.0:8083 0.0.0.0:* LISTEN 1696/transmission-d tcp 0 0 0.0.0.0:8084 0.0.0.0:* LISTEN 1718/python2 tcp 0 0 0.0.0.0:8085 0.0.0.0:* LISTEN 1860/python2 tcp 0 0 10.0.0.2:53 0.0.0.0:* LISTEN 641/named tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN 641/named tcp 0 0 0.0.0.0:8086 0.0.0.0:* LISTEN 29420/mediatomb
root@emerald ~ $ ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN mode DEFAULT link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: lan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc mq master br0 state UP mode DEFAULT qlen 1000 link/ether 00:10:18:58:45:f4 brd ff:ff:ff:ff:ff:ff 3: wan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000 link/ether 00:10:18:58:45:f6 brd ff:ff:ff:ff:ff:ff 4: lan1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 4000 qdisc pfifo_fast master br0 state DOWN mode DEFAULT qlen 1000 link/ether 50:e5:49:ed:c9:20 brd ff:ff:ff:ff:ff:ff 5: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br0 state UP mode DEFAULT qlen 1000 link/ether 90:f6:52:0d:c4:82 brd ff:ff:ff:ff:ff:ff 6: wlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br0 state UP mode DEFAULT qlen 1000 link/ether 00:c0:ca:53:e2:16 brd ff:ff:ff:ff:ff:ff 7: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT link/ether 00:10:18:58:45:f4 brd ff:ff:ff:ff:ff:ff 22: mon.wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UNKNOWN mode DEFAULT qlen 1000 link/ieee802.11/radiotap 90:f6:52:0d:c4:82 brd ff:ff:ff:ff:ff:ff 23: mon.wlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UNKNOWN mode DEFAULT qlen 1000 link/ieee802.11/radiotap 00:c0:ca:53:e2:16 brd ff:ff:ff:ff:ff:ff
No-one have any idea? I'm still having this issue. DLNA servers will show up briefly after they are started (i.e. MiniDLNA or Mediatomb) but they may not work and disappear shortly afterwards anyway.
Fixed this, turns out I needed to set the bridge to PROMISC mode. Odd that this isn't mentioned anywhere though so I wonder what is unique in my setup?
Only saw your post right now. Never heard of that setting - care to add it to the wiki? https://wiki.archlinux.org/index.php/Streaming_media
I'd like to figure out why I needed to do this first, I cannot see any mention anywhere on the net about needing to do this. Additionally I've seen it brought up several places that creating a network bridge automatically makes the interface(s) promiscuous, in that case, why do I need to set mine manually?
I had PS3mediaServer and now miniDLNA.
The first offer transcoding, but I gave it up because I couldn't find the way to start it after boot.
MiniDLNA is small and starts just fine, only need to check that the connection is ready. So I put a cron job to check every 2 minutes by pinging the router, then restart miniDLNA.
This way is OK, some time doesn't link due by router heavy traffic.
do it good first, it will be faster than do it twice the saint
None of them worked for me. I tried both MediaTomb and MiniDLNA. They would appear for a few seconds and then never be seen again until I enabled PROMISC on the br0 interface, now they all work fine (obviously not at the same time).
The programs were running fine and continued to run, they weren't crashing.
AFAIK, DLNA clients will only see DLNA servers on the same subnet. For instance, my wireless used to be on 192.168.204.x and my wired on 192.168.203.x. And that meant that none of the devices on wireless could "see" the DLNA server (in this case MediaTomb) on the server, which was on the wired subnet.
Not sure if this applies here though. Just thinking that maybe PROMISC mode shares all packets with all networks or something.
Nope, not that either (that is something else I saw mentioned). All devices are in the 10.0.0.X range (server is 10.0.0.2, all other devices are allocated between 10.0.0.100-200).
My full network setup, in case it's relevant, is below (now with added allmulti and promisc):
rfkill unblock all iw set reg GB brctl addbr br0 brctl stp br0 on brctl addif br0 lan0 brctl addif br0 lan1 ip link set lan0 up ip link set lan1 up ip link set wan0 up ip link set br0 up ip link set lan0 mtu 9000 ip link set lan1 mtu 4000 ip addr add 10.0.0.2/24 broadcast 10.0.0.255 dev br0 route add -net 22.214.171.124 netmask 255.0.0.0 br0 ifconfig br0 allmulti promisc dhclient -nw -w wan0
wlan0 and wlan1 are then added to the bridge by HostAPD.
Last edited by Enverex (2012-09-26 17:23:17)
MediaTomb is configured to listen on "br0" which is the only interface that has an IP address, all the rest are simply bridged together.
wan0 connects to the modem.
lan0 connects to the internal network.
lan1 is currently spare and doesn't do anything.
wlan0 is one wireless network AP.
wlan1 is a secondary wireless network AP.
None of the interfaces are assigned their own IPs, only the bridge is given an IP (as it's bridging all the adapters, there's no point them having their own IPs).
I don't know whether is relevant here.
My HDTV is wired and DLNA server(s- if I set smartphone as server) is(are) wireless, all other in the house are PC which would rather fetch the file and stream it for playing in VLC or mplayer. But all are getting IP by dhcp.
When the router is high loaded then is most problem to catch up the server and may fail to show up.
Last edited by TheSaint (2012-09-27 13:54:33)
do it good first, it will be faster than do it twice the saint