You are not logged in.
Hi everyone.
Since some time I get weird internet slowdowns which last some minutes (maximum 5): I can't even access to my router's homepage, or it's terribly slow, online games via wine have horrible lags, downloads break because of to slow rate, and so on... I know that it is not due to my routeur, because those lags don't appear on Windows (with the same machine).
iwconfig says me:
wlan0 IEEE 802.11bg ESSID:"Livebox-367C" Nickname:"rtl_wifi"
Mode:Managed Frequency:2.437 GHz Access Point: 00:1D:6A:9E:B7:EA
Bit Rate:54 Mb/s Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Power Management:off
Link Quality=73/100 Signal level=48/100 Noise level=0/100
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
and my device is (according to lsusb):
Bus 001 Device 003: ID 06f8:e031 Guillemot Corp. Hercules HWNUm-300 Wireless N mini [Realtek RTL8191SU]
Does someone has any clue to get constant transfert rate?
Thanks,
Nob.
Offline
Ah, one of those new rtl8192 dongles. I got one of those tiny ones with an external antenna. and their driver is.... horrible and crash prone.
Canned mine for one that has a proper mac80211 driver which is a lot more stable.
Hurricane Electric Certified IPv6 Sage
CPU: Core i7-2600 @ 4.0Ghz | RAM: 16GB (4x4GB) | GFX: AMD Radeon R9 290 4096MB VRAM | HDD: 1x 120GB SATA3 Corsair SSD (~500MB/s RW), 1x SATA2 250GB, 1x SATA2 320GB, 1x 180GB SATA3 Intel SSD
*EDIT* Replaced Nvidia GTX 570 for a AMD Radeon R9 290, and added an extra SSD 180GB
Offline
Thanks for your answer, although it doesn't really fix the problem... So owning to you I must buy another dongle. Nice ![]()
Offline
if u are using networkmanager it kinda slow down the connection isntead to disconnect. I got a problem like that in wicd, but my connection dropped down.
[jersey@localhost ~]$ iwconfig
wlan0 IEEE 802.11bgn ESSID:"ungalan"
Mode:Managed Frequency:2.432 GHz Access Point: 34:08:04:C2:CD:42
Bit Rate=150 Mb/s Tx-Power=16 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=51/70 Signal level=-59 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:2 Invalid misc:2 Missed beacon:0
lo no wireless extensions.
eth0 no wireless extensions.lspci -vvv output:
0d:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 1785
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c4500000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at c1400000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/4 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [70] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP+ BadDLLP+ Rollover- Timeout+ NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: ath9kIt also realted bugs with (reason=3) stuff
Last edited by ungaminga (2012-12-24 06:40:22)
Offline
bump
Offline
ungaminga, bumping is frowned upon here. If you want attention to pe paid to your thread, please add some relevent information on how you are trying to work towards a solution rather than simply an empty post.
Basically, you bought an adapter that just sucks under Linux. The rtl8192* modules jsut don't work very well. No this does not solve your problem, but bumping your thread isn't going to make them work better either. If you search the forums for threads relating to rtl8192, you will find a couple of semi-solutions to your issue. But you need to do some of your own research here. You can't expect other users to google for you.
Offline
ungaminga, bumping is frowned upon here. If you want attention to pe paid to your thread, please add some relevent information on how you are trying to work towards a solution rather than simply an empty post.
Basically, you bought an adapter that just sucks under Linux. The rtl8192* modules jsut don't work very well. No this does not solve your problem, but bumping your thread isn't going to make them work better either. If you search the forums for threads relating to rtl8192, you will find a couple of semi-solutions to your issue. But you need to do some of your own research here. You can't expect other users to google for you.
But i got a Atheros Communications Inc. AR9485 Wireless Network Adapter as i writed above. And yeah, i googled alot of time and there are no solution worked for me. The problem is annoying rly bad.
Offline
Oh, sorry I had read the first post and then assumed that you were the OP.
In that case, start a new thread. This one is not relevent to what you are asking.
Offline
I think I have the same problem, though I use wicd. It never actually loses the connection, but everything functions as if I wasn't connected and Win7 on my machine and Ubuntu on my laptop both work. My network device is Atheros Communications Inc. AR9285 Wireless Network Adapter with the ath9k driver, though it doesn't appear that that matters... What other information would be helpful? I'm not sure if I should start a new thread or not based on what WonderWoofy said but I suppose this doesn't hurt...
Offline