You are not logged in.
Hi Dear Arch Linux Experts,
I am a new Arch Linux user, I recently had enough of Windows with its random updatings and I installed Linux on my computer four weeks ago. I love the new system - it is stable, it boots really fast and I could manage the packages also, so I have almost all the programs which I need. I also installed Gnome as a desktop environment. Howewer, the internet connection does not seem very stable. It is working - I am writing currrently from Linux - but if I try to load some different sites, after a while it just stops working, and the browser displays a network error. I am connected to my Wi-Fi network at home, with WPA2 encryption and I always use Gnome's inbuilt menu to connect the network. I have a very unconfortable but working solution for the problem: I disconnect and reconnect to the network, and then it works for about a minute. I am wondering how I could fix the problem.
Ábel Nagy
Offline
Please post the output of:
# iwconfig
lspci -knn|grep -iA2 net
dmesg|egrep 'wl|firmw|dhc'
systemctl list-unit-files|grep enabled
Jin, Jîyan, Azadî
Offline
Please post the output of:
# iwconfig lspci -knn|grep -iA2 net dmesg|egrep 'wl|firmw|dhc' systemctl list-unit-files|grep enabled
This is the output of the commands:
[abel@localhost ~]$ iwconfig
bash: iwconfig: command not found
[abel@localhost ~]$ lspci -knn|grep -iA2 net
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7848]
Kernel driver in use: r8169
[abel@localhost ~]$ dmesg|egrep 'wl|firmw|dhc'
[ 9.221664] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 9.309481] rtl8192cu 3-9:1.0 wlp0s20u9: renamed from wlan0
[ 11.277574] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u9: link is not ready
[ 11.681363] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u9: link is not ready
[ 12.096005] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u9: link is not ready
[ 13.017745] wlp0s20u9: authenticate with 64:7c:34:8b:34:6c
[ 13.031150] wlp0s20u9: send auth to 64:7c:34:8b:34:6c (try 1/3)
[ 13.043035] wlp0s20u9: authenticated
[ 13.046247] wlp0s20u9: associate with 64:7c:34:8b:34:6c (try 1/3)
[ 13.061162] wlp0s20u9: RX AssocResp from 64:7c:34:8b:34:6c (capab=0x411 status=0 aid=3)
[ 13.062014] wlp0s20u9: associated
[ 13.062021] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20u9: link becomes ready
[ 292.665498] wlp0s20u9: deauthenticating from 64:7c:34:8b:34:6c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 298.967563] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u9: link is not ready
[ 299.005705] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u9: link is not ready
[ 299.940086] wlp0s20u9: authenticate with 64:7c:34:8b:34:6c
[ 299.950768] wlp0s20u9: send auth to 64:7c:34:8b:34:6c (try 1/3)
[ 299.955567] wlp0s20u9: authenticated
[ 299.955901] wlp0s20u9: associate with 64:7c:34:8b:34:6c (try 1/3)
[ 299.977634] wlp0s20u9: RX AssocResp from 64:7c:34:8b:34:6c (capab=0x411 status=0 aid=3)
[ 299.978446] wlp0s20u9: associated
[ 299.978453] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20u9: link becomes ready
[ 712.386879] wlp0s20u9: deauthenticating from 64:7c:34:8b:34:6c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 718.224402] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u9: link is not ready
[ 718.254187] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u9: link is not ready
[ 719.191093] wlp0s20u9: authenticate with 64:7c:34:8b:34:6c
[ 719.201656] wlp0s20u9: send auth to 64:7c:34:8b:34:6c (try 1/3)
[ 719.206628] wlp0s20u9: authenticated
[ 719.207478] wlp0s20u9: associate with 64:7c:34:8b:34:6c (try 1/3)
[ 719.229598] wlp0s20u9: RX AssocResp from 64:7c:34:8b:34:6c (capab=0x411 status=0 aid=3)
[ 719.230313] wlp0s20u9: associated
[ 719.230330] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20u9: link becomes ready
[ 774.702580] wlp0s20u9: deauthenticating from 64:7c:34:8b:34:6c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 777.737228] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u9: link is not ready
[ 777.782732] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u9: link is not ready
[ 778.725504] wlp0s20u9: authenticate with 64:7c:34:8b:34:6c
[ 778.736173] wlp0s20u9: send auth to 64:7c:34:8b:34:6c (try 1/3)
[ 778.744577] wlp0s20u9: authenticated
[ 778.745635] wlp0s20u9: associate with 64:7c:34:8b:34:6c (try 1/3)
[ 778.752254] wlp0s20u9: RX AssocResp from 64:7c:34:8b:34:6c (capab=0x411 status=0 aid=3)
[ 778.753078] wlp0s20u9: associated
[ 778.753098] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20u9: link becomes ready
[ 2538.532448] wlp0s20u9: deauthenticating from 64:7c:34:8b:34:6c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2541.024140] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u9: link is not ready
[ 2541.057773] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u9: link is not ready
[ 2541.989940] wlp0s20u9: authenticate with 64:7c:34:8b:34:6c
[ 2542.000498] wlp0s20u9: send auth to 64:7c:34:8b:34:6c (try 1/3)
[ 2542.005692] wlp0s20u9: authenticated
[ 2542.007823] wlp0s20u9: associate with 64:7c:34:8b:34:6c (try 1/3)
[ 2542.021458] wlp0s20u9: RX AssocResp from 64:7c:34:8b:34:6c (capab=0x411 status=0 aid=3)
[ 2542.022230] wlp0s20u9: associated
[ 2542.022253] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20u9: link becomes ready
[ 2573.432768] wlp0s20u9: deauthenticating from 64:7c:34:8b:34:6c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2576.207972] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u9: link is not ready
[ 2576.249220] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u9: link is not ready
[ 2577.180936] wlp0s20u9: authenticate with 64:7c:34:8b:34:6c
[ 2577.191516] wlp0s20u9: send auth to 64:7c:34:8b:34:6c (try 1/3)
[ 2577.217935] wlp0s20u9: authenticated
[ 2577.219188] wlp0s20u9: associate with 64:7c:34:8b:34:6c (try 1/3)
[ 2577.234040] wlp0s20u9: RX AssocResp from 64:7c:34:8b:34:6c (capab=0x411 status=0 aid=3)
[ 2577.234818] wlp0s20u9: associated
[ 2577.234836] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20u9: link becomes ready
[ 2584.857607] wlp0s20u9: deauthenticating from 64:7c:34:8b:34:6c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2588.713978] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u9: link is not ready
[ 2588.744423] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u9: link is not ready
[ 2589.676653] wlp0s20u9: authenticate with 64:7c:34:8b:34:6c
[ 2589.687248] wlp0s20u9: send auth to 64:7c:34:8b:34:6c (try 1/3)
[ 2589.694293] wlp0s20u9: authenticated
[ 2589.697725] wlp0s20u9: associate with 64:7c:34:8b:34:6c (try 1/3)
[ 2589.702695] wlp0s20u9: RX AssocResp from 64:7c:34:8b:34:6c (capab=0x411 status=0 aid=3)
[ 2589.703506] wlp0s20u9: associated
[ 2589.703527] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20u9: link becomes ready
[ 2999.403802] wlp0s20u9: deauthenticating from 64:7c:34:8b:34:6c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3002.529956] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u9: link is not ready
[ 3002.567001] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u9: link is not ready
[ 3003.506961] wlp0s20u9: authenticate with 64:7c:34:8b:34:6c
[ 3003.517500] wlp0s20u9: send auth to 64:7c:34:8b:34:6c (try 1/3)
[ 3003.527968] wlp0s20u9: authenticated
[ 3003.530343] wlp0s20u9: associate with 64:7c:34:8b:34:6c (try 1/3)
[ 3003.556237] wlp0s20u9: RX AssocResp from 64:7c:34:8b:34:6c (capab=0x411 status=0 aid=3)
[ 3003.557046] wlp0s20u9: associated
[ 3003.557053] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20u9: link becomes ready
[ 4682.728318] wlp0s20u9: deauthenticating from 64:7c:34:8b:34:6c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4685.405368] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u9: link is not ready
[ 4685.438973] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u9: link is not ready
[ 4686.371947] wlp0s20u9: authenticate with 64:7c:34:8b:34:6c
[ 4686.385126] wlp0s20u9: send auth to 64:7c:34:8b:34:6c (try 1/3)
[ 4686.407693] wlp0s20u9: authenticated
[ 4686.409032] wlp0s20u9: associate with 64:7c:34:8b:34:6c (try 1/3)
[ 4686.428967] wlp0s20u9: RX AssocResp from 64:7c:34:8b:34:6c (capab=0x411 status=0 aid=3)
[ 4686.429731] wlp0s20u9: associated
[ 4686.429752] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20u9: link becomes ready
[abel@localhost ~]$ systemctl list-unit-files|grep enabled
autovt@.service enabled
dbus-org.freedesktop.NetworkManager.service enabled
dbus-org.freedesktop.nm-dispatcher.service enabled
display-manager.service enabled
gdm.service enabled
getty@.service enabled
NetworkManager-dispatcher.service enabled
NetworkManager.service enabled
remote-fs.target enabled
[abel@localhost ~]$
Offline
[abel@localhost ~]$ iwconfig bash: iwconfig: command not found
Yes, sorry -- install the wireless_tools package for that (old) command.
Also, for some reason I thought this was a wireless issue so I should have grep'd for "en" rather than "wl"
All I can suggest for the moment is this tip on the ArchWiki:
https://wiki.archlinux.org/index.php/Ne … 11.2F8168B
Your card isn't exactly the same but it may be worth a try.
Jin, Jîyan, Azadî
Offline
Yes, sorry -- install the wireless_tools package for that (old) command.
This is the output of iwconfig:
enp2s0 no wireless extensions.
wlp0s20u9 IEEE 802.11bgn ESSID:"UPC1708297"
Mode:Managed Frequency:2.462 GHz Access Point: 64:7C:34:8B:34:6C
Bit Rate=72.2 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Power Management:off
Link Quality=58/70 Signal level=-52 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:42 Missed beacon:0
lo no wireless extensions.
Also, for some reason I thought this was a wireless issue so I should have grep'd for "en" rather than "wl"
Yes, it is! I want to connect to a Wi-Fi network.
All I can suggest for the moment is this tip on the ArchWiki:
https://wiki.archlinux.org/index.php/Ne … 11.2F8168BYour card isn't exactly the same but it may be worth a try.
I installed r8168 kernel module instead of r8169, as the wiki article said. Still the same problem.
Offline